diff mbox series

[08/15] x86: rockchip: Change how selection of ROMs works

Message ID 20200608192024.21484-5-sjg@chromium.org
State New
Headers show
Series rockchip: Support building ROM files automatically | expand

Commit Message

Simon Glass June 8, 2020, 7:20 p.m. UTC
Most x86 boards build a u-boot.rom which is programmed into SPI flash. But
this is not unique to x86. For example some rockchip boards can also boot
from SPI flash.

Also, at least on x86, binary blobs are sadly quite common. It is not
possible to build a functional image without them, and U-Boot needs to
know this at build time.

Introduce a new CONFIG_HAS_ROM option which selects whether u-boot.rom is
built and a new CONFIG_ROM_NEEDS_BLOBS option to indicate whether binary
blobs are also needed. If they are not needed, it is safe to build the ROM
always. Otherwise we still require the BUILD_ROM environment variable.

For now this affects only x86, but future patches will enable this for
rockchip too.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 Kconfig          | 18 +++++++++++++++++-
 Makefile         | 17 ++++++++++++-----
 arch/Kconfig     |  1 +
 arch/x86/Kconfig |  4 ++++
 4 files changed, 34 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/Kconfig b/Kconfig
index 0e7ccc0b07..876c5db911 100644
--- a/Kconfig
+++ b/Kconfig
@@ -240,9 +240,25 @@  config PHYS_64BIT
 	  This can be used not only for 64bit SoCs, but also for
 	  large physical address extension on 32bit SoCs.
 
+config HAS_ROM
+	bool
+	select BINMAN
+	help
+	  Enables building of a u-boot.rom target. This collects U-Boot and
+	  any necessary binary blobs.
+
+config ROM_NEEDS_BLOBS
+	bool
+	depends on HAS_ROM
+	help
+	  Enable this if building the u-boot.rom target needs binary blobs, and
+	  so cannot be done normally. In this case, pass BUILD_ROM=1 to make
+	  to tell U-Boot to build the ROM.
+
 config BUILD_ROM
 	bool "Build U-Boot as BIOS replacement"
-	depends on X86
+	depends on HAS_ROM
+	default y if !ROM_NEEDS_BLOBS
 	help
 	  This option allows to build a ROM version of U-Boot.
 	  The build process generally requires several binary blobs
diff --git a/Makefile b/Makefile
index db3b6b9991..d46338a6a4 100644
--- a/Makefile
+++ b/Makefile
@@ -916,9 +916,12 @@  ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
 ALL-$(CONFIG_EFI_APP) += u-boot-app.efi
 ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi
 
+ifneq ($(CONFIG_HAS_ROM),)
 ifneq ($(BUILD_ROM)$(CONFIG_BUILD_ROM),)
-ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
+ALL-y += u-boot.rom
 endif
+endif
+
 ifeq ($(CONFIG_SYS_COREBOOT)$(CONFIG_SPL),yy)
 ALL-$(CONFIG_BINMAN) += u-boot-x86-with-spl.bin
 endif
@@ -1580,7 +1583,7 @@  endif
 # reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
 # the middle. This is handled by binman based on an image description in the
 # board's device tree.
-ifneq ($(CONFIG_X86_RESET_VECTOR),)
+ifneq ($(CONFIG_HAS_ROM),)
 rom: u-boot.rom FORCE
 
 refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE
@@ -1590,11 +1593,12 @@  quiet_cmd_ldr = LD      $@
 cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
 	       $(filter-out FORCE,$^) -o $@
 
-u-boot.rom: u-boot-x86-start16.bin u-boot-x86-reset16.bin u-boot.bin \
+rom-deps := u-boot.bin
+ifdef CONFIG_X86
+rom-deps += u-boot-x86-start16.bin u-boot-x86-reset16.bin \
 		$(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
 		$(if $(CONFIG_TPL_X86_16BIT_INIT),tpl/u-boot-tpl.bin) \
-		$(if $(CONFIG_HAVE_REFCODE),refcode.bin) FORCE
-	$(call if_changed,binman)
+		$(if $(CONFIG_HAVE_REFCODE),refcode.bin)
 
 OBJCOPYFLAGS_u-boot-x86-start16.bin := -O binary -j .start16
 u-boot-x86-start16.bin: u-boot FORCE
@@ -1603,6 +1607,9 @@  u-boot-x86-start16.bin: u-boot FORCE
 OBJCOPYFLAGS_u-boot-x86-reset16.bin := -O binary -j .resetvec
 u-boot-x86-reset16.bin: u-boot FORCE
 	$(call if_changed,objcopy)
+
+u-boot.rom: $(rom-deps) FORCE
+	$(call if_changed,binman)
 endif
 
 ifneq ($(CONFIG_ARCH_SUNXI),)
diff --git a/arch/Kconfig b/arch/Kconfig
index a11f872938..bc85e5b50b 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -160,6 +160,7 @@  config X86
 	select TIMER
 	select USE_PRIVATE_LIBGCC
 	select X86_TSC_TIMER
+	select HAS_ROM if X86_RESET_VECTOR
 	imply BLK
 	imply CMD_DM
 	imply CMD_FPGA_LOADMK
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index c8eae24c07..c688c46475 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -360,6 +360,8 @@  config HAVE_FSP
 	bool "Add an Firmware Support Package binary"
 	depends on !EFI
 	select USE_HOB
+	select HAS_ROM
+	select ROM_NEEDS_BLOBS
 	help
 	  Select this option to add an Firmware Support Package binary to
 	  the resulting U-Boot image. It is a binary blob which U-Boot uses
@@ -519,6 +521,8 @@  config ENABLE_MRC_CACHE
 
 config HAVE_MRC
 	bool "Add a System Agent binary"
+	select HAS_ROM
+	select ROM_NEEDS_BLOBS
 	depends on !HAVE_FSP
 	help
 	  Select this option to add a System Agent binary to