diff mbox series

[2/4] arm64: dts: rockchip: Sync v5.7-rc1 VMARC RK3399Pro SOM

Message ID 20200610103658.96678-3-jagan@amarulasolutions.com
State Accepted
Commit f18d2663d34e9a9489be55aed365c2b8c76162a9
Headers show
Series rockchip: rk3399pro: Add Add Rock Pi N10 support | expand

Commit Message

Jagan Teki June 10, 2020, 10:36 a.m. UTC
VMARC RK3399Pro SOM is a standard SMARC SOM design with
Rockchip RK3399Pro SoC, which is designed by Vamrs.

Specification:
- Rockchip RK3399Pro
- PMIC: RK809-3
- SD slot, 16GiB eMMC
- 2xUSB-2.0, 1xUSB3.0
- USB-C for power supply
- Ethernet, PCIe
- HDMI, MIPI-DSI/CSI, eDP

Add initial support for VMARC RK3399Pro SOM, this would use
with associated carrier board.

Sync this dtsi from linux-next v5.7-rc1.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
 arch/arm/dts/rk3399pro-vmarc-som.dtsi | 333 ++++++++++++++++++++++++++
 1 file changed, 333 insertions(+)
 create mode 100644 arch/arm/dts/rk3399pro-vmarc-som.dtsi

Comments

Kever Yang June 27, 2020, 2:31 p.m. UTC | #1
On 2020/6/10 ??6:36, Jagan Teki wrote:
> VMARC RK3399Pro SOM is a standard SMARC SOM design with
> Rockchip RK3399Pro SoC, which is designed by Vamrs.
>
> Specification:
> - Rockchip RK3399Pro
> - PMIC: RK809-3
> - SD slot, 16GiB eMMC
> - 2xUSB-2.0, 1xUSB3.0
> - USB-C for power supply
> - Ethernet, PCIe
> - HDMI, MIPI-DSI/CSI, eDP
>
> Add initial support for VMARC RK3399Pro SOM, this would use
> with associated carrier board.
>
> Sync this dtsi from linux-next v5.7-rc1.
>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>

Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>   arch/arm/dts/rk3399pro-vmarc-som.dtsi | 333 ++++++++++++++++++++++++++
>   1 file changed, 333 insertions(+)
>   create mode 100644 arch/arm/dts/rk3399pro-vmarc-som.dtsi
>
> diff --git a/arch/arm/dts/rk3399pro-vmarc-som.dtsi b/arch/arm/dts/rk3399pro-vmarc-som.dtsi
> new file mode 100644
> index 0000000000..0a516334f1
> --- /dev/null
> +++ b/arch/arm/dts/rk3399pro-vmarc-som.dtsi
> @@ -0,0 +1,333 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
> + * Copyright (c) 2019 Vamrs Limited
> + * Copyright (c) 2019 Amarula Solutions(India)
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/pwm/pwm.h>
> +
> +/ {
> +	compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
> +
> +	clkin_gmac: external-gmac-clock {
> +		compatible = "fixed-clock";
> +		clock-frequency = <125000000>;
> +		clock-output-names = "clkin_gmac";
> +		#clock-cells = <0>;
> +	};
> +
> +	vcc12v_dcin: vcc12v-dcin-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc12v_dcin";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <12000000>;
> +		regulator-max-microvolt = <12000000>;
> +	};
> +
> +	vcc5v0_sys: vcc5v0-sys-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc5v0_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&vcc12v_dcin>;
> +	};
> +};
> +
> +&cpu_l0 {
> +	cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l1 {
> +	cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l2 {
> +	cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l3 {
> +	cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&emmc_phy {
> +	status = "okay";
> +};
> +
> +&gmac {
> +	assigned-clocks = <&cru SCLK_RMII_SRC>;
> +	assigned-clock-parents = <&clkin_gmac>;
> +	clock_in_out = "input";
> +	phy-supply = <&vcc_lan>;
> +	phy-mode = "rgmii";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&rgmii_pins>;
> +	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
> +	snps,reset-active-low;
> +	snps,reset-delays-us = <0 10000 50000>;
> +	tx_delay = <0x28>;
> +	rx_delay = <0x11>;
> +};
> +
> +&i2c0 {
> +	clock-frequency = <400000>;
> +	i2c-scl-rising-time-ns = <180>;
> +	i2c-scl-falling-time-ns = <30>;
> +	status = "okay";
> +
> +	rk809: pmic at 20 {
> +		compatible = "rockchip,rk809";
> +		reg = <0x20>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
> +		#clock-cells = <1>;
> +		clock-output-names = "rk808-clkout1", "rk808-clkout2";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pmic_int_l>;
> +		rockchip,system-power-controller;
> +		wakeup-source;
> +
> +		vcc1-supply = <&vcc5v0_sys>;
> +		vcc2-supply = <&vcc5v0_sys>;
> +		vcc3-supply = <&vcc5v0_sys>;
> +		vcc4-supply = <&vcc5v0_sys>;
> +		vcc5-supply = <&vcc_buck5>;
> +		vcc6-supply = <&vcc_buck5>;
> +		vcc7-supply = <&vcc5v0_sys>;
> +		vcc8-supply = <&vcc3v3_sys>;
> +		vcc9-supply = <&vcc5v0_sys>;
> +
> +		regulators {
> +			vdd_log: DCDC_REG1 {
> +				regulator-name = "vdd_log";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <750000>;
> +				regulator-max-microvolt = <1350000>;
> +				regulator-initial-mode = <0x2>;
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +					regulator-suspend-microvolt = <900000>;
> +				};
> +			};
> +
> +			vdd_cpu_l: DCDC_REG2 {
> +				regulator-name = "vdd_cpu_l";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <750000>;
> +				regulator-max-microvolt = <1350000>;
> +				regulator-ramp-delay = <6001>;
> +				regulator-initial-mode = <0x2>;
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_ddr: DCDC_REG3 {
> +				regulator-name = "vcc_ddr";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-initial-mode = <0x2>;
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +				};
> +			};
> +
> +			vcc3v3_sys: DCDC_REG4 {
> +				regulator-name = "vcc3v3_sys";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-initial-mode = <0x2>;
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <3300000>;
> +				};
> +			};
> +
> +			vcc_buck5: DCDC_REG5 {
> +				regulator-name = "vcc_buck5";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <2200000>;
> +				regulator-max-microvolt = <2200000>;
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <2200000>;
> +				};
> +			};
> +
> +			vcca_0v9: LDO_REG1 {
> +				regulator-name = "vcca_0v9";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <900000>;
> +				regulator-max-microvolt = <900000>;
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_1v8: LDO_REG2 {
> +				regulator-name = "vcc_1v8";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1800000>;
> +				};
> +			};
> +
> +			vcc_0v9: LDO_REG3 {
> +				regulator-name = "vcc_0v9";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <900000>;
> +				regulator-max-microvolt = <900000>;
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <900000>;
> +				};
> +			};
> +
> +			vcca_1v8: LDO_REG4 {
> +				regulator-name = "vcca_1v8";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1850000>;
> +				regulator-max-microvolt = <1850000>;
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			/*
> +			 * As per BSP, but schematic not showing any regulator
> +			 * pin for LD05.
> +			 */
> +			vdd1v5_dvp: LDO_REG5 {
> +				regulator-name = "vdd1v5_dvp";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1500000>;
> +				regulator-max-microvolt = <1500000>;
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_1v5: LDO_REG6 {
> +				regulator-name = "vcc_1v5";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1500000>;
> +				regulator-max-microvolt = <1500000>;
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vccio_3v0: LDO_REG7 {
> +				regulator-name = "vccio_3v0";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <3000000>;
> +				regulator-max-microvolt = <3000000>;
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vccio_sd: LDO_REG8 {
> +				regulator-name = "vccio_sd";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			/*
> +			 * As per BSP, but schematic not showing any regulator
> +			 * pin for LD09.
> +			 */
> +			vcc_sd: LDO_REG9 {
> +				regulator-name = "vcc_sd";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc5v0_usb2: SWITCH_REG1 {
> +				regulator-name = "vcc5v0_usb2";
> +				regulator-min-microvolt = <5000000>;
> +				regulator-max-microvolt = <5000000>;
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <5000000>;
> +				};
> +			};
> +
> +			vccio_3v3: vcc_lan: SWITCH_REG2 {
> +				regulator-name = "vccio_3v3";
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +&io_domains {
> +	status = "okay";
> +	bt656-supply = <&vcca_1v8>;
> +	sdmmc-supply = <&vccio_sd>;
> +	gpio1830-supply = <&vccio_3v0>;
> +};
> +
> +&pmu_io_domains {
> +	status = "okay";
> +	pmu1830-supply = <&vcc_1v8>;
> +};
> +
> +&sdhci {
> +	bus-width = <8>;
> +	mmc-hs400-1_8v;
> +	mmc-hs400-enhanced-strobe;
> +	non-removable;
> +	status = "okay";
> +};
> +
> +&tsadc {
> +	status = "okay";
> +	rockchip,hw-tshut-mode = <1>;
> +	rockchip,hw-tshut-polarity = <1>;
> +};
> +
> +&pinctrl {
> +	pmic {
> +		pmic_int_l: pmic-int-l {
> +			rockchip,pins =
> +				<1 RK_PC2 0 &pcfg_pull_up>;
> +		};
> +	};
> +};
diff mbox series

Patch

diff --git a/arch/arm/dts/rk3399pro-vmarc-som.dtsi b/arch/arm/dts/rk3399pro-vmarc-som.dtsi
new file mode 100644
index 0000000000..0a516334f1
--- /dev/null
+++ b/arch/arm/dts/rk3399pro-vmarc-som.dtsi
@@ -0,0 +1,333 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Vamrs Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <180>;
+	i2c-scl-falling-time-ns = <30>;
+	status = "okay";
+
+	rk809: pmic at 20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_buck5>;
+		vcc6-supply = <&vcc_buck5>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_buck5: DCDC_REG5 {
+				regulator-name = "vcc_buck5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2200000>;
+				};
+			};
+
+			vcca_0v9: LDO_REG1 {
+				regulator-name = "vcca_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_0v9: LDO_REG3 {
+				regulator-name = "vcc_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG4 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1850000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/*
+			 * As per BSP, but schematic not showing any regulator
+			 * pin for LD05.
+			 */
+			vdd1v5_dvp: LDO_REG5 {
+				regulator-name = "vdd1v5_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_3v0: LDO_REG7 {
+				regulator-name = "vccio_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG8 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/*
+			 * As per BSP, but schematic not showing any regulator
+			 * pin for LD09.
+			 */
+			vcc_sd: LDO_REG9 {
+				regulator-name = "vcc_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc5v0_usb2: SWITCH_REG1 {
+				regulator-name = "vcc5v0_usb2";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <5000000>;
+				};
+			};
+
+			vccio_3v3: vcc_lan: SWITCH_REG2 {
+				regulator-name = "vccio_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&io_domains {
+	status = "okay";
+	bt656-supply = <&vcca_1v8>;
+	sdmmc-supply = <&vccio_sd>;
+	gpio1830-supply = <&vccio_3v0>;
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_1v8>;
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <1>;
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 RK_PC2 0 &pcfg_pull_up>;
+		};
+	};
+};