diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index 30e29f680a..40814b22ad 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -239,11 +239,6 @@ config TARGET_DISPLAY5
 	select SUPPORT_SPL
 	imply CMD_DM
 
-config TARGET_EMBESTMX6BOARDS
-	bool "embestmx6boards"
-	select BOARD_LATE_INIT
-	select SUPPORT_SPL
-
 config TARGET_GE_BX50V3
 	bool "General Electric Bx50v3"
 	select BOARD_LATE_INIT
@@ -689,7 +684,6 @@ source "board/compulab/cm_fx6/Kconfig"
 source "board/congatec/cgtqmx6eval/Kconfig"
 source "board/dhelectronics/dh_imx6/Kconfig"
 source "board/el/el6x/Kconfig"
-source "board/embest/mx6boards/Kconfig"
 source "board/engicam/imx6q/Kconfig"
 source "board/engicam/imx6ul/Kconfig"
 source "board/freescale/mx6qarm2/Kconfig"
diff --git a/board/embest/mx6boards/Kconfig b/board/embest/mx6boards/Kconfig
deleted file mode 100644
index 24d01f2266..0000000000
--- a/board/embest/mx6boards/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_EMBESTMX6BOARDS
-
-config SYS_BOARD
-	default "mx6boards"
-
-config SYS_VENDOR
-	default "embest"
-
-config SYS_CONFIG_NAME
-	default "embestmx6boards"
-
-endif
diff --git a/board/embest/mx6boards/MAINTAINERS b/board/embest/mx6boards/MAINTAINERS
deleted file mode 100644
index 02756c58b3..0000000000
--- a/board/embest/mx6boards/MAINTAINERS
+++ /dev/null
@@ -1,8 +0,0 @@
-MX6BOARDS BOARD
-M:	Eric B?nard <eric at eukrea.com>
-S:	Maintained
-F:	board/embest/mx6boards/
-F:	include/configs/embestmx6boards.h
-F:	configs/marsboard_defconfig
-F:	configs/riotboard_defconfig
-F:	configs/riotboard_spl_defconfig
diff --git a/board/embest/mx6boards/Makefile b/board/embest/mx6boards/Makefile
deleted file mode 100644
index a032a3df9f..0000000000
--- a/board/embest/mx6boards/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2007, Guennadi Liakhovetski <lg at denx.de>
-#
-# (C) Copyright 2011 Freescale Semiconductor, Inc.
-
-obj-y  := mx6boards.o
diff --git a/board/embest/mx6boards/mx6boards.c b/board/embest/mx6boards/mx6boards.c
deleted file mode 100644
index e0834f03c7..0000000000
--- a/board/embest/mx6boards/mx6boards.c
+++ /dev/null
@@ -1,662 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2014 Eukr?a Electromatique
- * Author: Eric B?nard <eric at eukrea.com>
- *         Fabio Estevam <fabio.estevam at freescale.com>
- *         Jon Nettleton <jon.nettleton at gmail.com>
- *
- * based on sabresd.c which is :
- * Copyright (C) 2012 Freescale Semiconductor, Inc.
- * and on hummingboard.c which is :
- * Copyright (C) 2013 SolidRun ltd.
- * Copyright (C) 2013 Jon Nettleton <jon.nettleton at gmail.com>.
- */
-
-#include <common.h>
-#include <init.h>
-#include <net.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/mx6-pins.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <asm/gpio.h>
-#include <asm/mach-imx/iomux-v3.h>
-#include <asm/mach-imx/boot_mode.h>
-#include <asm/mach-imx/mxc_i2c.h>
-#include <asm/mach-imx/spi.h>
-#include <asm/mach-imx/video.h>
-#include <i2c.h>
-#include <input.h>
-#include <mmc.h>
-#include <fsl_esdhc_imx.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <asm/arch/mxc_hdmi.h>
-#include <asm/arch/crm_regs.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define UART_PAD_CTRL  (PAD_CTL_PUS_100K_UP |			\
-	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |			\
-	PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
-
-#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP |			\
-	PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm |			\
-	PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
-
-#define USDHC_PAD_CLK_CTRL (PAD_CTL_SPEED_LOW |		\
-	PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST |			\
-	PAD_CTL_HYS)
-
-#define ENET_PAD_CTRL  (PAD_CTL_PUS_100K_UP |			\
-	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
-
-#define ENET_PAD_CTRL_PD  (PAD_CTL_PUS_100K_DOWN |		\
-	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
-
-#define ENET_PAD_CTRL_CLK  ((PAD_CTL_PUS_100K_UP & ~PAD_CTL_PKE) | \
-	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
-
-#define I2C_PAD_CTRL	(PAD_CTL_PUS_100K_UP |			\
-	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS |	\
-	PAD_CTL_ODE | PAD_CTL_SRE_FAST)
-
-#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
-		      PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
-
-static int board_type = -1;
-#define BOARD_IS_MARSBOARD	0
-#define BOARD_IS_RIOTBOARD	1
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
-
-	return 0;
-}
-
-static iomux_v3_cfg_t const uart2_pads[] = {
-	MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
-	MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
-static void setup_iomux_uart(void)
-{
-	imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
-}
-
-iomux_v3_cfg_t const enet_pads[] = {
-	MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
-	/* GPIO16 -> AR8035 25MHz */
-	MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
-	/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
-	MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL_CLK),
-	MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD),
-	MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD),
-	MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL_PD),
-	/* AR8035 PHY Reset */
-	MX6_PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD),
-	/* AR8035 PHY Interrupt */
-	MX6_PAD_ENET_TX_EN__GPIO1_IO28 | MUX_PAD_CTRL(ENET_PAD_CTRL),
-};
-
-static void setup_iomux_enet(void)
-{
-	imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
-
-	/* Reset AR8035 PHY */
-	gpio_direction_output(IMX_GPIO_NR(3, 31) , 0);
-	mdelay(2);
-	gpio_set_value(IMX_GPIO_NR(3, 31), 1);
-}
-
-int mx6_rgmii_rework(struct phy_device *phydev)
-{
-	/* from linux/arch/arm/mach-imx/mach-imx6q.c :
-	 * Ar803x phy SmartEEE feature cause link status generates glitch,
-	 * which cause ethernet link down/up issue, so disable SmartEEE
-	 */
-	phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
-	phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x805d);
-	phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4003);
-
-	return 0;
-}
-
-int board_phy_config(struct phy_device *phydev)
-{
-	mx6_rgmii_rework(phydev);
-
-	if (phydev->drv->config)
-		phydev->drv->config(phydev);
-
-	return 0;
-}
-
-iomux_v3_cfg_t const usdhc2_pads[] = {
-	MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CLK_CTRL),
-	MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), /* WP */
-	MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
-};
-
-iomux_v3_cfg_t const usdhc3_pads[] = {
-	MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CLK_CTRL),
-	MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-};
-
-iomux_v3_cfg_t const riotboard_usdhc3_pads[] = {
-	MX6_PAD_SD3_DAT4__GPIO7_IO01 | MUX_PAD_CTRL(NO_PAD_CTRL), /* WP */
-	MX6_PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
-};
-
-iomux_v3_cfg_t const usdhc4_pads[] = {
-	MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CLK_CTRL),
-	MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	/* eMMC RST */
-	MX6_PAD_NANDF_ALE__GPIO6_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-#ifdef CONFIG_FSL_ESDHC_IMX
-struct fsl_esdhc_cfg usdhc_cfg[3] = {
-	{USDHC2_BASE_ADDR},
-	{USDHC3_BASE_ADDR},
-	{USDHC4_BASE_ADDR},
-};
-
-#define USDHC2_CD_GPIO	IMX_GPIO_NR(1, 4)
-#define USDHC3_CD_GPIO	IMX_GPIO_NR(7, 0)
-
-int board_mmc_getcd(struct mmc *mmc)
-{
-	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
-	int ret = 0;
-
-	switch (cfg->esdhc_base) {
-	case USDHC2_BASE_ADDR:
-		ret = !gpio_get_value(USDHC2_CD_GPIO);
-		break;
-	case USDHC3_BASE_ADDR:
-		if (board_type == BOARD_IS_RIOTBOARD)
-			ret = !gpio_get_value(USDHC3_CD_GPIO);
-		else if (board_type == BOARD_IS_MARSBOARD)
-			ret = 1; /* eMMC/uSDHC3 is always present */
-		break;
-	case USDHC4_BASE_ADDR:
-		ret = 1; /* eMMC/uSDHC4 is always present */
-		break;
-	}
-
-	return ret;
-}
-
-int board_mmc_init(bd_t *bis)
-{
-	int ret;
-	int i;
-
-	/*
-	 * According to the board_mmc_init() the following map is done:
-	 * (U-Boot device node)    (Physical Port)
-	 * ** RiOTboard :
-	 * mmc0                    SDCard slot (bottom)
-	 * mmc1                    uSDCard slot (top)
-	 * mmc2                    eMMC
-	 * ** MarSBoard :
-	 * mmc0                    uSDCard slot (bottom)
-	 * mmc1                    eMMC
-	 */
-	for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
-		switch (i) {
-		case 0:
-			imx_iomux_v3_setup_multiple_pads(
-				usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
-			gpio_direction_input(USDHC2_CD_GPIO);
-			usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
-			usdhc_cfg[0].max_bus_width = 4;
-			break;
-		case 1:
-			imx_iomux_v3_setup_multiple_pads(
-				usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
-			if (board_type == BOARD_IS_RIOTBOARD) {
-				imx_iomux_v3_setup_multiple_pads(
-					riotboard_usdhc3_pads,
-					ARRAY_SIZE(riotboard_usdhc3_pads));
-				gpio_direction_input(USDHC3_CD_GPIO);
-			} else {
-				gpio_direction_output(IMX_GPIO_NR(7, 8) , 0);
-				udelay(250);
-				gpio_set_value(IMX_GPIO_NR(7, 8), 1);
-			}
-			usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
-			usdhc_cfg[1].max_bus_width = 4;
-			break;
-		case 2:
-			imx_iomux_v3_setup_multiple_pads(
-				usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
-			usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
-			usdhc_cfg[2].max_bus_width = 4;
-			gpio_direction_output(IMX_GPIO_NR(6, 8) , 0);
-			udelay(250);
-			gpio_set_value(IMX_GPIO_NR(6, 8), 1);
-			break;
-		default:
-			printf("Warning: you configured more USDHC controllers"
-			       "(%d) then supported by the board (%d)\n",
-			       i + 1, CONFIG_SYS_FSL_USDHC_NUM);
-			return -EINVAL;
-		}
-
-		ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_MXC_SPI
-iomux_v3_cfg_t const ecspi1_pads[] = {
-	MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
-	MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
-	MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
-	MX6_PAD_EIM_EB2__GPIO2_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-int board_spi_cs_gpio(unsigned bus, unsigned cs)
-{
-	return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(2, 30)) : -1;
-}
-
-static void setup_spi(void)
-{
-	imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
-}
-#endif
-
-struct i2c_pads_info i2c_pad_info1 = {
-	.scl = {
-		.i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL
-				| MUX_PAD_CTRL(I2C_PAD_CTRL),
-		.gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27
-				| MUX_PAD_CTRL(I2C_PAD_CTRL),
-		.gp = IMX_GPIO_NR(5, 27)
-	},
-	.sda = {
-		.i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA
-				| MUX_PAD_CTRL(I2C_PAD_CTRL),
-		.gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26
-				| MUX_PAD_CTRL(I2C_PAD_CTRL),
-		.gp = IMX_GPIO_NR(5, 26)
-	}
-};
-
-struct i2c_pads_info i2c_pad_info2 = {
-	.scl = {
-		.i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL
-				| MUX_PAD_CTRL(I2C_PAD_CTRL),
-		.gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12
-				| MUX_PAD_CTRL(I2C_PAD_CTRL),
-		.gp = IMX_GPIO_NR(4, 12)
-	},
-	.sda = {
-		.i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA
-				| MUX_PAD_CTRL(I2C_PAD_CTRL),
-		.gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13
-				| MUX_PAD_CTRL(I2C_PAD_CTRL),
-		.gp = IMX_GPIO_NR(4, 13)
-	}
-};
-
-struct i2c_pads_info i2c_pad_info3 = {
-	.scl = {
-		.i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL
-				| MUX_PAD_CTRL(I2C_PAD_CTRL),
-		.gpio_mode = MX6_PAD_GPIO_5__GPIO1_IO05
-				| MUX_PAD_CTRL(I2C_PAD_CTRL),
-		.gp = IMX_GPIO_NR(1, 5)
-	},
-	.sda = {
-		.i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA
-				| MUX_PAD_CTRL(I2C_PAD_CTRL),
-		.gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06
-				| MUX_PAD_CTRL(I2C_PAD_CTRL),
-		.gp = IMX_GPIO_NR(1, 6)
-	}
-};
-
-iomux_v3_cfg_t const tft_pads_riot[] = {
-	/* LCD_PWR_EN */
-	MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
-	/* TOUCH_INT */
-	MX6_PAD_NANDF_CS1__GPIO6_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL),
-	/* LED_PWR_EN */
-	MX6_PAD_NANDF_CS2__GPIO6_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
-	/* BL LEVEL */
-	MX6_PAD_SD1_CMD__GPIO1_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-iomux_v3_cfg_t const tft_pads_mars[] = {
-	/* LCD_PWR_EN */
-	MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
-	/* TOUCH_INT */
-	MX6_PAD_NANDF_CS1__GPIO6_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL),
-	/* LED_PWR_EN */
-	MX6_PAD_NANDF_CS2__GPIO6_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
-	/* BL LEVEL (PWM4) */
-	MX6_PAD_SD4_DAT2__GPIO2_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-#if defined(CONFIG_VIDEO_IPUV3)
-
-static void enable_lvds(struct display_info_t const *dev)
-{
-	struct iomuxc *iomux = (struct iomuxc *)
-				IOMUXC_BASE_ADDR;
-	setbits_le32(&iomux->gpr[2],
-		     IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT);
-	/* set backlight level to ON */
-	if (board_type == BOARD_IS_RIOTBOARD)
-		gpio_direction_output(IMX_GPIO_NR(1, 18) , 1);
-	else if (board_type == BOARD_IS_MARSBOARD)
-		gpio_direction_output(IMX_GPIO_NR(2, 10) , 1);
-}
-
-static void disable_lvds(struct display_info_t const *dev)
-{
-	struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
-
-	/* set backlight level to OFF */
-	if (board_type == BOARD_IS_RIOTBOARD)
-		gpio_direction_output(IMX_GPIO_NR(1, 18) , 0);
-	else if (board_type == BOARD_IS_MARSBOARD)
-		gpio_direction_output(IMX_GPIO_NR(2, 10) , 0);
-
-	clrbits_le32(&iomux->gpr[2],
-		     IOMUXC_GPR2_LVDS_CH0_MODE_MASK);
-}
-
-static void do_enable_hdmi(struct display_info_t const *dev)
-{
-	disable_lvds(dev);
-	imx_enable_hdmi_phy();
-}
-
-static int detect_i2c(struct display_info_t const *dev)
-{
-	return (0 == i2c_set_bus_num(dev->bus)) &&
-		(0 == i2c_probe(dev->addr));
-}
-
-struct display_info_t const displays[] = {{
-	.bus	= -1,
-	.addr	= 0,
-	.pixfmt	= IPU_PIX_FMT_RGB24,
-	.detect	= detect_hdmi,
-	.enable	= do_enable_hdmi,
-	.mode	= {
-		.name           = "HDMI",
-		.refresh        = 60,
-		.xres           = 1024,
-		.yres           = 768,
-		.pixclock       = 15385,
-		.left_margin    = 220,
-		.right_margin   = 40,
-		.upper_margin   = 21,
-		.lower_margin   = 7,
-		.hsync_len      = 60,
-		.vsync_len      = 10,
-		.sync           = FB_SYNC_EXT,
-		.vmode          = FB_VMODE_NONINTERLACED
-} }, {
-	.bus	= 2,
-	.addr	= 0x1,
-	.pixfmt	= IPU_PIX_FMT_LVDS666,
-	.detect	= detect_i2c,
-	.enable	= enable_lvds,
-	.mode	= {
-		.name           = "LCD8000-97C",
-		.refresh        = 60,
-		.xres           = 1024,
-		.yres           = 768,
-		.pixclock       = 15385,
-		.left_margin    = 100,
-		.right_margin   = 200,
-		.upper_margin   = 10,
-		.lower_margin   = 20,
-		.hsync_len      = 20,
-		.vsync_len      = 8,
-		.sync           = FB_SYNC_EXT,
-		.vmode          = FB_VMODE_NONINTERLACED
-} } };
-size_t display_count = ARRAY_SIZE(displays);
-
-static void setup_display(void)
-{
-	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
-	struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
-	int reg;
-
-	enable_ipu_clock();
-	imx_setup_hdmi();
-
-	/* Turn on LDB0, IPU,IPU DI0 clocks */
-	setbits_le32(&mxc_ccm->CCGR3,
-		     MXC_CCM_CCGR3_LDB_DI0_MASK);
-
-	/* set LDB0 clk select to 011/011 */
-	clrsetbits_le32(&mxc_ccm->cs2cdr,
-			MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK,
-			(3 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET));
-
-	setbits_le32(&mxc_ccm->cscmr2,
-		     MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV);
-
-	setbits_le32(&mxc_ccm->chsccdr,
-		     (CHSCCDR_CLK_SEL_LDB_DI0
-		     << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET));
-
-	reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
-	     | IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
-	     | IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
-	     | IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT
-	     | IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
-	     | IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT
-	     | IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
-	     | IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
-	writel(reg, &iomux->gpr[2]);
-
-	clrsetbits_le32(&iomux->gpr[3],
-			IOMUXC_GPR3_LVDS0_MUX_CTL_MASK |
-			IOMUXC_GPR3_HDMI_MUX_CTL_MASK,
-			IOMUXC_GPR3_MUX_SRC_IPU1_DI0
-			<< IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
-}
-#endif /* CONFIG_VIDEO_IPUV3 */
-
-/*
- * Do not overwrite the console
- * Use always serial for U-Boot console
- */
-int overwrite_console(void)
-{
-	return 1;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	setup_iomux_enet();
-
-	return cpu_eth_init(bis);
-}
-
-int board_early_init_f(void)
-{
-	u32 cputype = cpu_type(get_cpu_rev());
-
-	switch (cputype) {
-	case MXC_CPU_MX6SOLO:
-		board_type = BOARD_IS_RIOTBOARD;
-		break;
-	case MXC_CPU_MX6D:
-		board_type = BOARD_IS_MARSBOARD;
-		break;
-	}
-
-	setup_iomux_uart();
-
-	if (board_type == BOARD_IS_RIOTBOARD)
-		imx_iomux_v3_setup_multiple_pads(
-			tft_pads_riot, ARRAY_SIZE(tft_pads_riot));
-	else if (board_type == BOARD_IS_MARSBOARD)
-		imx_iomux_v3_setup_multiple_pads(
-			tft_pads_mars, ARRAY_SIZE(tft_pads_mars));
-#if defined(CONFIG_VIDEO_IPUV3)
-	/* power ON LCD */
-	gpio_direction_output(IMX_GPIO_NR(1, 29) , 1);
-	/* touch interrupt is an input */
-	gpio_direction_input(IMX_GPIO_NR(6, 14));
-	/* power ON backlight */
-	gpio_direction_output(IMX_GPIO_NR(6, 15) , 1);
-	/* set backlight level to off */
-	if (board_type == BOARD_IS_RIOTBOARD)
-		gpio_direction_output(IMX_GPIO_NR(1, 18) , 0);
-	else if (board_type == BOARD_IS_MARSBOARD)
-		gpio_direction_output(IMX_GPIO_NR(2, 10) , 0);
-	setup_display();
-#endif
-
-	return 0;
-}
-
-int board_init(void)
-{
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-	/* i2c1 : PMIC, Audio codec on RiOT, Expansion connector on MarS */
-	setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
-	/* i2c2 : HDMI EDID */
-	setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
-	/* i2c3 : LVDS, Expansion connector */
-	setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3);
-#ifdef CONFIG_MXC_SPI
-	setup_spi();
-#endif
-	return 0;
-}
-
-#ifdef CONFIG_CMD_BMODE
-static const struct boot_mode riotboard_boot_modes[] = {
-	{"sd2",	 MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
-	{"sd3",	 MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
-	{"emmc", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
-	{NULL,	 0},
-};
-static const struct boot_mode marsboard_boot_modes[] = {
-	{"sd2",	 MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
-	{"emmc", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
-	{NULL,	 0},
-};
-#endif
-
-int board_late_init(void)
-{
-#ifdef CONFIG_CMD_BMODE
-	if (board_type == BOARD_IS_RIOTBOARD)
-		add_board_boot_modes(riotboard_boot_modes);
-	else if (board_type == BOARD_IS_RIOTBOARD)
-		add_board_boot_modes(marsboard_boot_modes);
-#endif
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	puts("Board: ");
-	if (board_type == BOARD_IS_MARSBOARD)
-		puts("MarSBoard\n");
-	else if (board_type == BOARD_IS_RIOTBOARD)
-		puts("RIoTboard\n");
-	else
-		printf("unknown - cputype : %02x\n", cpu_type(get_cpu_rev()));
-
-	return 0;
-}
-
-#ifdef CONFIG_SPL_BUILD
-#include <spl.h>
-
-void board_init_f(ulong dummy)
-{
-	u32 cputype = cpu_type(get_cpu_rev());
-
-	switch (cputype) {
-	case MXC_CPU_MX6SOLO:
-		board_type = BOARD_IS_RIOTBOARD;
-		break;
-	case MXC_CPU_MX6D:
-		board_type = BOARD_IS_MARSBOARD;
-		break;
-	}
-	arch_cpu_init();
-
-	/* setup GP timer */
-	timer_init();
-
-#ifdef CONFIG_SPL_SERIAL_SUPPORT
-	setup_iomux_uart();
-	preloader_console_init();
-#endif
-}
-
-void board_boot_order(u32 *spl_boot_list)
-{
-	spl_boot_list[0] = BOOT_DEVICE_MMC1;
-}
-
-/*
- * In order to jump to standard u-boot shell, you have to connect pin 5 of J13
- * to pin 3 (ground).
- */
-int spl_start_uboot(void)
-{
-	int gpio_key = IMX_GPIO_NR(4, 16);
-
-	gpio_direction_input(gpio_key);
-	if (gpio_get_value(gpio_key) == 0)
-		return 1;
-	else
-		return 0;
-}
-
-#endif
diff --git a/configs/marsboard_defconfig b/configs/marsboard_defconfig
deleted file mode 100644
index 765a3ca2b6..0000000000
--- a/configs/marsboard_defconfig
+++ /dev/null
@@ -1,44 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SYS_TEXT_BASE=0x17800000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0xC0000
-CONFIG_ENV_SECT_SIZE=0x2000
-CONFIG_TARGET_EMBESTMX6BOARDS=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024"
-CONFIG_BOOTCOMMAND="run finduuid; run distro_bootcmd"
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
-CONFIG_BOUNCE_BUFFER=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_FSL_USDHC=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=20000000
-CONFIG_SPI_FLASH_SST=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_MII=y
-CONFIG_SPI=y
-CONFIG_MXC_SPI=y
-CONFIG_DM_THERMAL=y
-CONFIG_USB=y
-CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_ASIX=y
-CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
diff --git a/configs/riotboard_defconfig b/configs/riotboard_defconfig
deleted file mode 100644
index 73656017d1..0000000000
--- a/configs/riotboard_defconfig
+++ /dev/null
@@ -1,44 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SYS_TEXT_BASE=0x17800000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x60000
-CONFIG_TARGET_EMBESTMX6BOARDS=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024"
-CONFIG_BOOTCOMMAND="run finduuid; run distro_bootcmd"
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
-CONFIG_BOUNCE_BUFFER=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_SUPPORT_EMMC_BOOT=y
-CONFIG_FSL_USDHC=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=20000000
-CONFIG_SPI_FLASH_SST=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_MII=y
-CONFIG_SPI=y
-CONFIG_MXC_SPI=y
-CONFIG_DM_THERMAL=y
-CONFIG_USB=y
-CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_ASIX=y
-CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
diff --git a/configs/riotboard_spl_defconfig b/configs/riotboard_spl_defconfig
deleted file mode 100644
index 5ff8da0355..0000000000
--- a/configs/riotboard_spl_defconfig
+++ /dev/null
@@ -1,55 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SYS_TEXT_BASE=0x17800000
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x60000
-CONFIG_TARGET_EMBESTMX6BOARDS=y
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_SPL=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SPL_TEXT_BASE=0x00908000
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,SPL,MX6S,DDR_MB=1024"
-CONFIG_BOOTCOMMAND="run finduuid; run distro_bootcmd"
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_RAW_IMAGE_SUPPORT=y
-CONFIG_SPL_FS_EXT4=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
-CONFIG_SUPPORT_EMMC_BOOT=y
-CONFIG_FSL_USDHC=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=20000000
-CONFIG_SPI_FLASH_SST=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_MII=y
-CONFIG_SPI=y
-CONFIG_MXC_SPI=y
-CONFIG_DM_THERMAL=y
-CONFIG_USB=y
-CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_ASIX=y
-CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
-CONFIG_SPL_OF_LIBFDT=y
diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h
deleted file mode 100644
index 24a0025eda..0000000000
--- a/include/configs/embestmx6boards.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2014 Eukr?a Electromatique
- * Author: Eric B?nard <eric at eukrea.com>
- *
- * Configuration settings for the Embest RIoTboard
- *
- * based on mx6*sabre*.h which are :
- * Copyright (C) 2012 Freescale Semiconductor, Inc.
- */
-
-#ifndef __RIOTBOARD_CONFIG_H
-#define __RIOTBOARD_CONFIG_H
-
-#define CONFIG_MXC_UART_BASE		UART2_BASE
-#define CONSOLE_DEV		"ttymxc1"
-
-#define PHYS_SDRAM_SIZE		(1u * 1024 * 1024 * 1024)
-
-#define CONFIG_IMX_THERMAL
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)
-
-#define CONFIG_MXC_UART
-
-/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_SPEED		100000
-
-/* USB Configs */
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
-#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS	0
-
-/* MMC Configs */
-#define CONFIG_SYS_FSL_ESDHC_ADDR      0
-
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE			ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE		RGMII
-#define CONFIG_ETHPRIME			"FEC"
-#define CONFIG_FEC_MXC_PHYADDR		4
-
-#define CONFIG_ARP_TIMEOUT     200UL
-
-/* Physical Memory Map */
-#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
-
-#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-/* Environment organization */
-
-#if defined(CONFIG_ENV_IS_IN_MMC)
-/* RiOTboard */
-#define CONFIG_FDTFILE	"imx6dl-riotboard.dtb"
-#define CONFIG_SYS_FSL_USDHC_NUM	3
-#define CONFIG_SYS_MMC_ENV_DEV		2	/* SDHC4 */
-#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
-/* MarSBoard */
-#define CONFIG_FDTFILE	"imx6q-marsboard.dtb"
-#define CONFIG_SYS_FSL_USDHC_NUM	2
-#endif
-
-/* Framebuffer */
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_IMX_HDMI
-#define CONFIG_IMX_VIDEO_SKIP
-
-#include "mx6_common.h"
-
-#ifdef CONFIG_SPL
-#include "imx6_spl.h"
-/* RiOTboard */
-#define CONFIG_SYS_SPL_ARGS_ADDR 0x13000000
-#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
-#define CONFIG_SPL_FS_LOAD_ARGS_NAME "imx6dl-riotboard.dtb"
-
-#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR        0 /* offset 69KB */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0 /* offset 69KB */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* offset 69KB */
-
-#endif
-
-/* 256M RAM (minimum), 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
- * 1M script, 1M pxe and the ramdisk at the end */
-#define MEM_LAYOUT_ENV_SETTINGS \
-	"bootm_size=0x10000000\0" \
-	"kernel_addr_r=0x12000000\0" \
-	"fdt_addr_r=0x13000000\0" \
-	"scriptaddr=0x13100000\0" \
-	"pxefile_addr_r=0x13200000\0" \
-	"ramdisk_addr_r=0x13300000\0"
-
-#define BOOT_TARGET_DEVICES(func) \
-	func(MMC, mmc, 0) \
-	func(MMC, mmc, 1) \
-	func(MMC, mmc, 2) \
-	func(USB, usb, 0) \
-	func(PXE, pxe, na) \
-	func(DHCP, dhcp, na)
-
-#include <config_distro_bootcmd.h>
-
-#define CONSOLE_STDIN_SETTINGS \
-	"stdin=serial\0"
-
-#define CONSOLE_STDOUT_SETTINGS \
-	"stdout=serial\0" \
-	"stderr=serial\0"
-
-#define CONSOLE_ENV_SETTINGS \
-	CONSOLE_STDIN_SETTINGS \
-	CONSOLE_STDOUT_SETTINGS
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	CONSOLE_ENV_SETTINGS \
-	MEM_LAYOUT_ENV_SETTINGS \
-	"fdtfile=" CONFIG_FDTFILE "\0" \
-	"finduuid=part uuid mmc 0:1 uuid\0" \
-	BOOTENV
-
-#endif                         /* __RIOTBOARD_CONFIG_H */
