From patchwork Fri Jul 10 10:18:59 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ovidiu Panait X-Patchwork-Id: 241286 List-Id: U-Boot discussion From: ovidiu.panait at windriver.com (Ovidiu Panait) Date: Fri, 10 Jul 2020 13:18:59 +0300 Subject: [PATCH v2 06/14] board_f: m68k: Factor out m68k-specific bdinfo setup In-Reply-To: <20200710101907.11214-1-ovidiu.panait@windriver.com> References: <20200710101907.11214-1-ovidiu.panait@windriver.com> Message-ID: <20200710101907.11214-6-ovidiu.panait@windriver.com> Factor out m68k-specific bdinfo setup to arch_setup_bdinfo in arch/m68k/lib/bdinfo.c. Also, use if(IS_ENABLED()) instead of #ifdef where possible. Signed-off-by: Ovidiu Panait Reviewed-by: Simon Glass --- v2 updates: - use "if (IS_ENABLED(CONFIG_SYS_HAS_SRAM))" instead of "#ifdef CONFIG_SYS_SRAM_BASE" arch/m68k/lib/bdinfo.c | 32 ++++++++++++++++++++++++++++++++ common/board_f.c | 14 ++++---------- 2 files changed, 36 insertions(+), 10 deletions(-) diff --git a/arch/m68k/lib/bdinfo.c b/arch/m68k/lib/bdinfo.c index 971c47c306..3257195add 100644 --- a/arch/m68k/lib/bdinfo.c +++ b/arch/m68k/lib/bdinfo.c @@ -11,6 +11,38 @@ DECLARE_GLOBAL_DATA_PTR; +int arch_setup_bdinfo(void) +{ + bd_t *bd = gd->bd; + + /* + * Save local variables to board info struct + */ + bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of memory */ + bd->bi_memsize = gd->ram_size; /* size in bytes */ + + if (IS_ENABLED(CONFIG_SYS_HAS_SRAM)) { + bd->bi_sramstart = CONFIG_SYS_SRAM_BASE; /* start of SRAM */ + bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; /* size of SRAM */ + } + + bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */ + + bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */ + bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */ + + if (IS_ENABLED(CONFIG_PCI)) + bd->bi_pcifreq = gd->pci_clk; + +#if defined(CONFIG_EXTRA_CLOCK) + bd->bi_inpfreq = gd->arch.inp_clk; /* input Freq in Hz */ + bd->bi_vcofreq = gd->arch.vco_clk; /* vco Freq in Hz */ + bd->bi_flbfreq = gd->arch.flb_clk; /* flexbus Freq in Hz */ +#endif + + return 0; +} + void arch_print_bdinfo(void) { bd_t *bd = gd->bd; diff --git a/common/board_f.c b/common/board_f.c index e597749d2f..7d65879b93 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -602,7 +602,7 @@ __weak int arch_setup_bdinfo(void) return 0; } -#if defined(CONFIG_M68K) || defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \ +#if defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \ defined(CONFIG_SH) static int setup_board_part1(void) { @@ -622,9 +622,6 @@ static int setup_board_part1(void) #if defined(CONFIG_E500) || defined(CONFIG_MPC86xx) bd->bi_immr_base = CONFIG_SYS_IMMR; /* base of IMMR register */ #endif -#if defined(CONFIG_M68K) - bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */ -#endif #if defined(CONFIG_MPC83xx) bd->bi_immrbar = CONFIG_SYS_IMMR; #endif @@ -633,7 +630,7 @@ static int setup_board_part1(void) } #endif -#if defined(CONFIG_PPC) || defined(CONFIG_M68K) +#if defined(CONFIG_PPC) static int setup_board_part2(void) { bd_t *bd = gd->bd; @@ -646,9 +643,6 @@ static int setup_board_part2(void) bd->bi_sccfreq = gd->arch.scc_clk; bd->bi_vco = gd->arch.vco_out; #endif /* CONFIG_CPM2 */ -#if defined(CONFIG_M68K) && defined(CONFIG_PCI) - bd->bi_pcifreq = gd->pci_clk; -#endif #if defined(CONFIG_EXTRA_CLOCK) bd->bi_inpfreq = gd->arch.inp_clk; /* input Freq in Hz */ bd->bi_vcofreq = gd->arch.vco_clk; /* vco Freq in Hz */ @@ -980,11 +974,11 @@ static const init_fnc_t init_sequence_f[] = { dram_init_banksize, show_dram_config, arch_setup_bdinfo, -#if defined(CONFIG_M68K) || defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \ +#if defined(CONFIG_MIPS) || defined(CONFIG_PPC) || \ defined(CONFIG_SH) setup_board_part1, #endif -#if defined(CONFIG_PPC) || defined(CONFIG_M68K) +#if defined(CONFIG_PPC) INIT_FUNC_WATCHDOG_RESET setup_board_part2, #endif