new file mode 100644
@@ -0,0 +1,165 @@
+.. SPDX-License-Identifier: GPL-2.0+
+.. Copyright (c) 2022 Linaro Limited
+
+FWU Multi Bank Updates in U-Boot
+================================
+
+The FWU Multi Bank Update feature implements the firmware update
+mechanism described in the PSA Firmware Update for A-profile Arm
+Architecture specification [1]. Certain aspects of the Dependable
+Boot specification [2] are also implemented. The feature provides a
+mechanism to have multiple banks of updatable firmware images and for
+updating the firmware images on the non-booted bank. On a successful
+update, the platform boots from the updated bank on subsequent
+boot. The UEFI capsule-on-disk update feature is used for performing
+the actual updates of the updatable firmware images.
+
+The bookkeeping of the updatable images is done through a structure
+called metadata. Currently, the FWU metadata supports identification
+of images based on image GUIDs stored on a GPT partitioned storage
+media. There are plans to extend the metadata structure for non GPT
+partitioned devices as well.
+
+Accessing the FWU metadata is done through generic API's which are
+defined in a driver which complies with the U-Boot's driver model. A
+new uclass UCLASS_FWU_MDATA has been added for accessing the FWU
+metadata. Individual drivers can be added based on the type of storage
+media, and it's partitioning method. Details of the storage device
+containing the FWU metadata partitions are specified through a U-Boot
+specific device tree property `fwu-mdata-store`. Please refer to
+U-Boot `doc <doc/device-tree-bindings/firmware/fwu-mdata-gpt.yaml>`__
+for the device tree bindings.
+
+Enabling the FWU Multi Bank Update feature
+------------------------------------------
+
+The feature can be enabled by specifying the following configs::
+
+ CONFIG_EFI_CAPSULE_ON_DISK=y
+ CONFIG_EFI_CAPSULE_FIRMWARE_MANAGEMENT=y
+ CONFIG_EFI_CAPSULE_FIRMWARE=y
+ CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
+
+ CONFIG_FWU_MULTI_BANK_UPDATE=y
+ CONFIG_CMD_FWU_METADATA=y
+ CONFIG_DM_FWU_MDATA=y
+ CONFIG_FWU_MDATA_GPT_BLK=y
+ CONFIG_FWU_NUM_BANKS=<val>
+ CONFIG_FWU_NUM_IMAGES_PER_BANK=<val>
+
+in the .config file
+
+The first group of configuration settings enable the UEFI
+capsule-on-disk update functionality. The second group of configs
+enable the FWU Multi Bank Update functionality. Please refer to the
+section :ref:`uefi_capsule_update_ref` for more details on generation
+of the UEFI capsule.
+
+Setting up the device for GPT partitioned storage
+-------------------------------------------------
+
+Before enabling the functionality in U-Boot, a GPT partitioned storage
+device is required. Assuming a GPT partitioned storage device, the
+storage media needs to be partitioned with the correct number of
+partitions, given the number of banks and number of images per bank
+that the platform is going to support. Each updatable firmware image
+will be stored on an separate partition. In addition, the two copies
+of the FWU metadata will be stored on two separate partitions.
+
+As an example, a platform supporting two banks with each bank
+containing three images would need to have 2 * 3 = 6 partitions plus
+the two metadata partitions, or 8 partitions. In addition the storage
+media can have additional partitions of non-updatable images, like the
+EFI System Partition(ESP), a partition for the root file system
+etc. An example list of images on the storage medium would be
+
+* FWU metadata 1
+* U-Boot 1
+* OP-TEE 1
+* FWU metadata 2
+* OP-TEE 2
+* U-Boot 2
+* ESP
+* rootfs
+
+When generating the partitions, a few aspects need to be taken care
+of. Each GPT partition entry in the GPT header has two GUIDs::
+
+* PartitionTypeGUID
+* UniquePartitionGUID
+
+The PartitionTypeGUID value should correspond to the
+``image_type_uuid`` field of the FWU metadata. This field is used to
+identify a given type of updatable firmware image, e.g. U-Boot,
+OP-TEE, FIP etc. This GUID should also be used for specifying the
+`--guid` parameter when generating the capsule.
+
+The UniquePartitionGUID value should correspond to the ``image_uuid``
+field in the FWU metadata. This GUID is used to identify images of a
+given image type in different banks.
+
+Similarly, the FWU specifications defines the GUID value to be used
+for the metadata partitions. This would be the PartitionTypeGUID for
+the metadata partitions.
+
+When generating the metadata, the ``image_type_uuid`` and the
+``image_uuid`` values should match the *PartitionTypeGUID* and the
+*UniquePartitionGUID* values respectively.
+
+Performing the Update
+---------------------
+
+Once the storage media has been partitioned and populated with the
+metadata partitions, the UEFI capsule-on-disk update functionality can
+be used for performing the update. Refer to the section
+:ref:`uefi_capsule_update_ref` for details on how the update can be
+invoked.
+
+On a successful update, the FWU metadata gets updated to reflect the
+bank from which the platform would be booting on subsequent boot.
+
+Based on the value of bit15 of the Flags member of the capsule header,
+the updated images would either be accepted by the U-Boot's UEFI
+implementation, or by the Operating System. If the Operating System is
+accepting the firmware images, it does so by generating an empty
+*accept* capsule. The Operating System can also reject the updated
+firmware by generating a *revert* capsule. The empty capsule can be
+applied by using the exact same procedure used for performing the
+capsule-on-disk update.
+
+The task of accepting the different firmware images, post an update
+may be done by multiple, separate components in the Operating
+System. To help identify the firmware image that is being accepted,
+the accept capsule passes the image GUID of the firmware image being
+accepted. The relevant code in U-Boot then sets the Accept bit of the
+corresponding firmware image for which the accept capsule was
+found. Only when all the firmware components in a bank have been
+accepted does the platform transition to the regular state from trial
+state.
+
+The revert capsule on the other hand does not pass any image GUID,
+since reverting any image of the bank has the same result of the
+platform booting from the other bank on subsequent boot.
+
+Generating an empty capsule
+---------------------------
+
+The empty capsule can be generated using the mkeficapsule utility. To
+build the tool, enable::
+
+ CONFIG_TOOLS_MKEFICAPSULE=y
+
+Run the following commands to generate the accept/revert capsules::
+
+.. code-block:: bash
+
+ $ ./tools/mkeficapsule \
+ [--fw-accept --guid <image guid>] | \
+ [--fw-revert] \
+ <capsule_file_name>
+
+Links
+-----
+
+* [1] https://developer.arm.com/documentation/den0118/a/ - FWU Specification
+* [2] https://git.codelinaro.org/linaro/dependable-boot/mbfw/uploads/6f7ddfe3be24e18d4319e108a758d02e/mbfw.pdf - Dependable Boot Specification
@@ -13,3 +13,4 @@ can be run an UEFI payload.
uefi.rst
u-boot_on_efi.rst
iscsi.rst
+ fwu_updates.rst
@@ -277,6 +277,8 @@ Enable ``CONFIG_OPTEE``, ``CONFIG_CMD_OPTEE_RPMB`` and ``CONFIG_EFI_MM_COMM_TEE`
[1] https://optee.readthedocs.io/en/latest/building/efi_vars/stmm.html
+.. _uefi_capsule_update_ref:
+
Enabling UEFI Capsule Update feature
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~