From patchwork Tue Mar 19 12:22:01 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 781083 Delivered-To: patch@linaro.org Received: by 2002:a5d:46c1:0:b0:33e:7753:30bd with SMTP id g1csp1895751wrs; Tue, 19 Mar 2024 05:22:50 -0700 (PDT) X-Forwarded-Encrypted: i=2; AJvYcCWZqyrEqgyap8eIT8CQE+hZZaUGr2RdUMhMdS8S+9u3TOZ6oiB4rNE/j5Ea6Z+egXupTjCQLX4O4Du+35qY7KK1 X-Google-Smtp-Source: AGHT+IFAAVMzk/N2eYCnEyWdPSP+geGP0qwcITJcgu10n0LBIsYlic7GW4B/rhVG1fQTNxcCaNIV X-Received: by 2002:a5d:4252:0:b0:33e:40a3:22c8 with SMTP id s18-20020a5d4252000000b0033e40a322c8mr10556247wrr.33.1710850970064; Tue, 19 Mar 2024 05:22:50 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1710850970; cv=none; d=google.com; s=arc-20160816; b=Zy+kk/kzyEesUh4LedVpcI73iVURh4NI9oA5nMm/kWlIW413YtRazErSeKIdsVKTG9 Cx4hQ7EgJeeBaGgyROipx+sryPhI6Du1nSaVa5tmqUa6kn1QiEZtQvMxlVVBJ4Cn0+7+ 8tZZpdKFYIJgO5sTOsN5C3onUqpubBa8ISAdo0JcBeTe4MP5Wfd3Bkqw3TmapG6dqzJ3 2vC/gSSMBsEYOcgSdrYEoHg6hKW0GnaPsSdqQaboFiCjaZg+9oegVOwiwYOB/Oofoh5u L8cAGZqWblitW8JTC7cro+0xYZJOL+PbZtCq7C5s811BPxbqUmvuqmN8QZRz03cKhlMP ufLw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=sender:errors-to:list-subscribe:list-help:list-post:list-archive :list-unsubscribe:list-id:precedence:cc:to:in-reply-to:references :message-id:content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=g6mWag3Pi0kWshdhpN9Ua0MKGgBjEmDiXuTezGTIVCc=; fh=IUJzsJXR8tzOhtgP/Qm7FzQrRAC2ZStJPTaXNXY0swo=; b=tDtvoN0GM2A3mBFZMf6EmciQgfKD98X2v+gCZAS0zPRdlALFMIWyQpcaP4ee9EPZDw mOQUN7ow89jKMhi8DOLim8n0QmWOW5AT58i7w7PJbEyyoC090CZ/itkyKdojkgVYsome xhKC6TqSrpncllTQrJuwE7yxuPVWhi+tzNwa+PIOfNpvdN5AUyr3mZSPNtqY+Q+SfHId 10Epo2K6aJaFmqYzo6H0GwAqvIxcf4eLuLJfesuFODd6HwBYxyrCfKhOIUAQafZtH8rS hRJsBa6lWYEV3FYCZYW2WJNoqndA1KM2i4DTCifvvY8OMEVCsKid7g0SpdbMPZS0wyrU s1uA==; dara=google.com ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=yt8tymjY; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 2a01:238:438b:c500:173d:9f52:ddab:ee01 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from phobos.denx.de (phobos.denx.de. [2a01:238:438b:c500:173d:9f52:ddab:ee01]) by mx.google.com with ESMTPS id z1-20020a5d6541000000b0033e4a652cabsi5904308wrv.860.2024.03.19.05.22.49 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 19 Mar 2024 05:22:50 -0700 (PDT) Received-SPF: pass (google.com: domain of u-boot-bounces@lists.denx.de designates 2a01:238:438b:c500:173d:9f52:ddab:ee01 as permitted sender) client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=yt8tymjY; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 2a01:238:438b:c500:173d:9f52:ddab:ee01 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 64FCF8806C; Tue, 19 Mar 2024 13:22:42 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.b="yt8tymjY"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 5D35188024; Tue, 19 Mar 2024 13:22:41 +0100 (CET) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE,SPF_PASS, T_SCC_BODY_TEXT_LINE autolearn=ham autolearn_force=no version=3.4.2 Received: from mail-wr1-x431.google.com (mail-wr1-x431.google.com [IPv6:2a00:1450:4864:20::431]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id EDCF387F8C for ; Tue, 19 Mar 2024 13:22:38 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=caleb.connolly@linaro.org Received: by mail-wr1-x431.google.com with SMTP id ffacd0b85a97d-34005b5927eso1901235f8f.1 for ; Tue, 19 Mar 2024 05:22:38 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1710850958; x=1711455758; darn=lists.denx.de; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=g6mWag3Pi0kWshdhpN9Ua0MKGgBjEmDiXuTezGTIVCc=; b=yt8tymjY90P28puc7GdMNILHqFSp5VDxP64I1RI6SYkRPOO3Mw8OFylLOVl2F13Nfd atv2x+sRSqBGt/jdL2++9jLuUV3zz3LibGk1xNMVeMYSymx1IbYSIy1dwftkYJHojtkx 4gwhoVImg4hJEzlP/yG8RN6jCEglv1mDYfk1/2VfUizJ82uL7QkgmRdZ3V/ABV+S+TEh yfuDdPefBnRn4SZSz42WeTQhJpeDswsJPku/ZYBe+wmhGeuVRSArGlym1rbOkeWS0AoL GjzLzEYG+qKUVw2UWwImO1jgudTOMs/JXF9XvfRiznNNne/ArYyclzAVhZcgk4dZN9hH JIlQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1710850958; x=1711455758; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=g6mWag3Pi0kWshdhpN9Ua0MKGgBjEmDiXuTezGTIVCc=; b=TtcmKODF5X+aB7Rkv0/jb34nwioMgzdp+kSHq3FUR4JHl8MV8MD8XQjHh4jBrP43ow ouIpVOkQ8vIWxi0oBNqr33goKarg1awH4MX0CcEsWJV0DYKefdd8TULi4+THexGdXU2W 5ZxV6/0sfNaVviUeuw4E19H2Y5zUSwHlHEQWbSeZBZj9RIGIQ0H3c0AEOuUj+iJw7GuV b4nwS16KwIsTd3oweBMUX9Uf2Nx/OMUS1FuErxqViajwGkUHi/qWr0Ho8JI9hM+H9q+R 4R82HvuvPvDbPMAFXejZd8pvzVFcrt4gm3AAxRD3ogjOYQ4kyC7WVy7iEErIOMQYHCRb 606g== X-Gm-Message-State: AOJu0YzkajFKHboSIccwrmFBTLn+V9buvE702Ex3XU6z/F26IxfsvMLs u16Z0zbjzwiK4xfaxtNtO2gTsLpqM2CdLgk1mUR3AxGuTaVGG0Yp91yJPdQJ11QoP15kAg1y67P 0 X-Received: by 2002:a5d:440e:0:b0:33e:9451:c299 with SMTP id z14-20020a5d440e000000b0033e9451c299mr12789647wrq.26.1710850958066; Tue, 19 Mar 2024 05:22:38 -0700 (PDT) Received: from lion.localdomain (host-92-17-96-232.as13285.net. [92.17.96.232]) by smtp.gmail.com with ESMTPSA id du18-20020a0560000d5200b0033b7ce8b496sm12170498wrb.108.2024.03.19.05.22.37 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 19 Mar 2024 05:22:37 -0700 (PDT) From: Caleb Connolly Date: Tue, 19 Mar 2024 12:22:01 +0000 Subject: [PATCH v3 02/14] phy: qcom: add Qualcomm QUSB2 USB PHY driver MIME-Version: 1.0 Message-Id: <20240319-b4-qcom-livetree-v3-2-e1b38d9b4fa4@linaro.org> References: <20240319-b4-qcom-livetree-v3-0-e1b38d9b4fa4@linaro.org> In-Reply-To: <20240319-b4-qcom-livetree-v3-0-e1b38d9b4fa4@linaro.org> To: Tom Rini , Caleb Connolly , Neil Armstrong , Sumit Garg , Lukasz Majewski , Sean Anderson Cc: u-boot@lists.denx.de, Bhupesh Sharma , Bhupesh Sharma X-Mailer: b4 0.14-dev X-Developer-Signature: v=1; a=openpgp-sha256; l=14855; i=caleb.connolly@linaro.org; h=from:subject:message-id; bh=2N7jc6PfWuEQfGhtx0f5pYAPd9Ykl627THeMqJkhbUo=; b=owGbwMvMwCFYaeA6f6eBkTjjabUkhtSfzZ0vUm0+MxlxZZ+eOL0zzNVy+pffD05wlii8UbJd6 z+f465KRykLgyAHg6yYIov4iWWWTWsv22tsX3ABZg4rE8gQBi5OAZiImiYjwxa7loeHmX7H+vuq labN/pV5gPcRG3/m/eVTigrb+bs39TP8D/zZxL58bgqr64nZ+mKii/KFAry03nYe+1KnHq+v4vF qEgA= X-Developer-Key: i=caleb.connolly@linaro.org; a=openpgp; fpr=83B24DA7FE145076BC38BB250CD904EB673A7C47 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean From: Bhupesh Sharma The Snapdragon 845 and several other Qualcomm SoCs feature this USB high-speed phy. Add a driver for it based on the Linux driver, with support for the SDM845, and the QCM2290 and SM6115 SoCs which will gain support in U-Boot in future patches. Signed-off-by: Bhupesh Sharma [code cleanup, switch to clk_bulk] Signed-off-by: Caleb Connolly --- drivers/phy/qcom/Kconfig | 7 + drivers/phy/qcom/Makefile | 1 + drivers/phy/qcom/phy-qcom-qusb2.c | 468 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 476 insertions(+) diff --git a/drivers/phy/qcom/Kconfig b/drivers/phy/qcom/Kconfig index f4ca174805a4..361dfb6e1126 100644 --- a/drivers/phy/qcom/Kconfig +++ b/drivers/phy/qcom/Kconfig @@ -11,8 +11,15 @@ config PHY_QCOM_IPQ4019_USB depends on PHY && ARCH_IPQ40XX help Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s. +config PHY_QCOM_QUSB2 + tristate "Qualcomm USB QUSB2 PHY driver" + depends on PHY && ARCH_SNAPDRAGON + help + Enable this to support the Super-Speed USB transceiver on various + Qualcomm chipsets. + config PHY_QCOM_USB_HS_28NM tristate "Qualcomm 28nm High-Speed PHY" depends on PHY && ARCH_SNAPDRAGON help diff --git a/drivers/phy/qcom/Makefile b/drivers/phy/qcom/Makefile index 2113f178c0c7..f6af985666a4 100644 --- a/drivers/phy/qcom/Makefile +++ b/drivers/phy/qcom/Makefile @@ -1,4 +1,5 @@ obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o obj-$(CONFIG_MSM8916_USB_PHY) += msm8916-usbh-phy.o +obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o obj-$(CONFIG_PHY_QCOM_USB_HS_28NM) += phy-qcom-usb-hs-28nm.o obj-$(CONFIG_PHY_QCOM_USB_SS) += phy-qcom-usb-ss.o diff --git a/drivers/phy/qcom/phy-qcom-qusb2.c b/drivers/phy/qcom/phy-qcom-qusb2.c new file mode 100644 index 000000000000..5b654403a181 --- /dev/null +++ b/drivers/phy/qcom/phy-qcom-qusb2.c @@ -0,0 +1,468 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2023 Bhupesh Sharma + * + * Based on Linux driver + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#define QUSB2PHY_PLL 0x0 +#define QUSB2PHY_PLL_TEST 0x04 +#define CLK_REF_SEL BIT(7) + +#define QUSB2PHY_PLL_TUNE 0x08 +#define QUSB2PHY_PLL_USER_CTL1 0x0c +#define QUSB2PHY_PLL_USER_CTL2 0x10 +#define QUSB2PHY_PLL_AUTOPGM_CTL1 0x1c +#define QUSB2PHY_PLL_PWR_CTRL 0x18 + +/* QUSB2PHY_PLL_STATUS register bits */ +#define PLL_LOCKED BIT(5) + +/* QUSB2PHY_PLL_COMMON_STATUS_ONE register bits */ +#define CORE_READY_STATUS BIT(0) + +/* QUSB2PHY_PORT_POWERDOWN register bits */ +#define CLAMP_N_EN BIT(5) +#define FREEZIO_N BIT(1) +#define POWER_DOWN BIT(0) + +/* QUSB2PHY_PWR_CTRL1 register bits */ +#define PWR_CTRL1_VREF_SUPPLY_TRIM BIT(5) +#define PWR_CTRL1_CLAMP_N_EN BIT(1) + +#define QUSB2PHY_REFCLK_ENABLE BIT(0) + +#define PHY_CLK_SCHEME_SEL BIT(0) + +/* QUSB2PHY_INTR_CTRL register bits */ +#define DMSE_INTR_HIGH_SEL BIT(4) +#define DPSE_INTR_HIGH_SEL BIT(3) +#define CHG_DET_INTR_EN BIT(2) +#define DMSE_INTR_EN BIT(1) +#define DPSE_INTR_EN BIT(0) + +/* QUSB2PHY_PLL_CORE_INPUT_OVERRIDE register bits */ +#define CORE_PLL_EN_FROM_RESET BIT(4) +#define CORE_RESET BIT(5) +#define CORE_RESET_MUX BIT(6) + +/* QUSB2PHY_IMP_CTRL1 register bits */ +#define IMP_RES_OFFSET_MASK GENMASK(5, 0) +#define IMP_RES_OFFSET_SHIFT 0x0 + +/* QUSB2PHY_PLL_BIAS_CONTROL_2 register bits */ +#define BIAS_CTRL2_RES_OFFSET_MASK GENMASK(5, 0) +#define BIAS_CTRL2_RES_OFFSET_SHIFT 0x0 + +/* QUSB2PHY_CHG_CONTROL_2 register bits */ +#define CHG_CTRL2_OFFSET_MASK GENMASK(5, 4) +#define CHG_CTRL2_OFFSET_SHIFT 0x4 + +/* QUSB2PHY_PORT_TUNE1 register bits */ +#define HSTX_TRIM_MASK GENMASK(7, 4) +#define HSTX_TRIM_SHIFT 0x4 +#define PREEMPH_WIDTH_HALF_BIT BIT(2) +#define PREEMPHASIS_EN_MASK GENMASK(1, 0) +#define PREEMPHASIS_EN_SHIFT 0x0 + +/* QUSB2PHY_PORT_TUNE2 register bits */ +#define HSDISC_TRIM_MASK GENMASK(1, 0) +#define HSDISC_TRIM_SHIFT 0x0 + +#define QUSB2PHY_PLL_ANALOG_CONTROLS_TWO 0x04 +#define QUSB2PHY_PLL_CLOCK_INVERTERS 0x18c +#define QUSB2PHY_PLL_CMODE 0x2c +#define QUSB2PHY_PLL_LOCK_DELAY 0x184 +#define QUSB2PHY_PLL_DIGITAL_TIMERS_TWO 0xb4 +#define QUSB2PHY_PLL_BIAS_CONTROL_1 0x194 +#define QUSB2PHY_PLL_BIAS_CONTROL_2 0x198 +#define QUSB2PHY_PWR_CTRL2 0x214 +#define QUSB2PHY_IMP_CTRL1 0x220 +#define QUSB2PHY_IMP_CTRL2 0x224 +#define QUSB2PHY_CHG_CTRL2 0x23c + +struct qusb2_phy_init_tbl { + unsigned int offset; + unsigned int val; + /* + * register part of layout ? + * if yes, then offset gives index in the reg-layout + */ + int in_layout; +}; + +struct qusb2_phy_cfg { + const struct qusb2_phy_init_tbl *tbl; + /* number of entries in the table */ + unsigned int tbl_num; + /* offset to PHY_CLK_SCHEME register in TCSR map */ + unsigned int clk_scheme_offset; + + /* array of registers with different offsets */ + const unsigned int *regs; + unsigned int mask_core_ready; + unsigned int disable_ctrl; + unsigned int autoresume_en; + + /* true if PHY has PLL_TEST register to select clk_scheme */ + bool has_pll_test; + + /* true if TUNE1 register must be updated by fused value, else TUNE2 */ + bool update_tune1_with_efuse; + + /* true if PHY has PLL_CORE_INPUT_OVERRIDE register to reset PLL */ + bool has_pll_override; +}; + +/* set of registers with offsets different per-PHY */ +enum qusb2phy_reg_layout { + QUSB2PHY_PLL_CORE_INPUT_OVERRIDE, + QUSB2PHY_PLL_STATUS, + QUSB2PHY_PORT_TUNE1, + QUSB2PHY_PORT_TUNE2, + QUSB2PHY_PORT_TUNE3, + QUSB2PHY_PORT_TUNE4, + QUSB2PHY_PORT_TUNE5, + QUSB2PHY_PORT_TEST1, + QUSB2PHY_PORT_TEST2, + QUSB2PHY_PORT_POWERDOWN, + QUSB2PHY_INTR_CTRL, +}; + +#define QUSB2_PHY_INIT_CFG(o, v) \ + { \ + .offset = o, .val = v, \ + } + +#define QUSB2_PHY_INIT_CFG_L(o, v) \ + { \ + .offset = o, .val = v, .in_layout = 1, \ + } + +static const struct qusb2_phy_init_tbl sm6115_init_tbl[] = { + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xf8), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x53), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0x81), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0x17), + + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21), + + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14), + + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9f), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00), +}; + +static const unsigned int sm6115_regs_layout[] = { + [QUSB2PHY_PLL_STATUS] = 0x38, [QUSB2PHY_PORT_TUNE1] = 0x80, + [QUSB2PHY_PORT_TUNE2] = 0x84, [QUSB2PHY_PORT_TUNE3] = 0x88, + [QUSB2PHY_PORT_TUNE4] = 0x8c, [QUSB2PHY_PORT_TUNE5] = 0x90, + [QUSB2PHY_PORT_TEST1] = 0xb8, [QUSB2PHY_PORT_TEST2] = 0x9c, + [QUSB2PHY_PORT_POWERDOWN] = 0xb4, [QUSB2PHY_INTR_CTRL] = 0xbc, +}; + +static const struct qusb2_phy_init_tbl qusb2_v2_init_tbl[] = { + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x03), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_LOCK_DELAY, 0x0a), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_BIAS_CONTROL_1, 0x40), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_BIAS_CONTROL_2, 0x20), + QUSB2_PHY_INIT_CFG(QUSB2PHY_PWR_CTRL2, 0x21), + QUSB2_PHY_INIT_CFG(QUSB2PHY_IMP_CTRL1, 0x0), + QUSB2_PHY_INIT_CFG(QUSB2PHY_IMP_CTRL2, 0x58), + + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0x30), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x29), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE3, 0xca), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0x04), + QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x03), + + QUSB2_PHY_INIT_CFG(QUSB2PHY_CHG_CTRL2, 0x0), +}; + +static const unsigned int qusb2_v2_regs_layout[] = { + [QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8, + [QUSB2PHY_PLL_STATUS] = 0x1a0, + [QUSB2PHY_PORT_TUNE1] = 0x240, + [QUSB2PHY_PORT_TUNE2] = 0x244, + [QUSB2PHY_PORT_TUNE3] = 0x248, + [QUSB2PHY_PORT_TUNE4] = 0x24c, + [QUSB2PHY_PORT_TUNE5] = 0x250, + [QUSB2PHY_PORT_TEST1] = 0x254, + [QUSB2PHY_PORT_TEST2] = 0x258, + [QUSB2PHY_PORT_POWERDOWN] = 0x210, + [QUSB2PHY_INTR_CTRL] = 0x230, +}; + +static const struct qusb2_phy_cfg sm6115_phy_cfg = { + .tbl = sm6115_init_tbl, + .tbl_num = ARRAY_SIZE(sm6115_init_tbl), + .regs = sm6115_regs_layout, + + .has_pll_test = true, + .disable_ctrl = (CLAMP_N_EN | FREEZIO_N | POWER_DOWN), + .mask_core_ready = PLL_LOCKED, + .autoresume_en = BIT(3), +}; + +static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = { + .tbl = qusb2_v2_init_tbl, + .tbl_num = ARRAY_SIZE(qusb2_v2_init_tbl), + .regs = qusb2_v2_regs_layout, + + .disable_ctrl = (PWR_CTRL1_VREF_SUPPLY_TRIM | PWR_CTRL1_CLAMP_N_EN | + POWER_DOWN), + .mask_core_ready = CORE_READY_STATUS, + .has_pll_override = true, + .autoresume_en = BIT(0), + .update_tune1_with_efuse = true, +}; + +/** + * struct qusb2_phy - structure holding qusb2 phy attributes + * + * @phy: generic phy + * @base: iomapped memory space for qubs2 phy + * + * @cfg_ahb_clk: AHB2PHY interface clock + * @phy_rst: phy reset control + * + * @cfg: phy config data + * @has_se_clk_scheme: indicate if PHY has single-ended ref clock scheme + */ +struct qusb2_phy { + struct phy *phy; + void __iomem *base; + + struct clk cfg_ahb_clk; + struct reset_ctl phy_rst; + + const struct qusb2_phy_cfg *cfg; + bool has_se_clk_scheme; +}; + +static inline void qusb2_write_mask(void __iomem *base, u32 offset, u32 val, + u32 mask) +{ + u32 reg; + + reg = readl(base + offset); + reg &= ~mask; + reg |= val & mask; + writel(reg, base + offset); + + /* Ensure above write is completed */ + readl(base + offset); +} + +static inline void qusb2_setbits(void __iomem *base, u32 offset, u32 val) +{ + u32 reg; + + reg = readl(base + offset); + reg |= val; + writel(reg, base + offset); + + /* Ensure above write is completed */ + readl(base + offset); +} + +static inline void qusb2_clrbits(void __iomem *base, u32 offset, u32 val) +{ + u32 reg; + + reg = readl(base + offset); + reg &= ~val; + writel(reg, base + offset); + + /* Ensure above write is completed */ + readl(base + offset); +} + +static inline void qusb2_phy_configure(void __iomem *base, + const unsigned int *regs, + const struct qusb2_phy_init_tbl tbl[], + int num) +{ + int i; + + for (i = 0; i < num; i++) { + if (tbl[i].in_layout) + writel(tbl[i].val, base + regs[tbl[i].offset]); + else + writel(tbl[i].val, base + tbl[i].offset); + } +} + +static int qusb2phy_do_reset(struct qusb2_phy *qphy) +{ + int ret; + + ret = reset_assert(&qphy->phy_rst); + if (ret) + return ret; + + udelay(10); + + ret = reset_deassert(&qphy->phy_rst); + if (ret) + return ret; + + return 0; +} + +static int qusb2phy_power_on(struct phy *phy) +{ + struct qusb2_phy *qphy = dev_get_priv(phy->dev); + const struct qusb2_phy_cfg *cfg = qphy->cfg; + int ret; + u32 val; + + ret = qusb2phy_do_reset(qphy); + if (ret) + return ret; + + /* Disable the PHY */ + qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_POWERDOWN], + qphy->cfg->disable_ctrl); + + if (cfg->has_pll_test) { + /* save reset value to override reference clock scheme later */ + val = readl(qphy->base + QUSB2PHY_PLL_TEST); + } + + qusb2_phy_configure(qphy->base, cfg->regs, cfg->tbl, cfg->tbl_num); + + /* Enable the PHY */ + qusb2_clrbits(qphy->base, cfg->regs[QUSB2PHY_PORT_POWERDOWN], + POWER_DOWN); + + /* Required to get phy pll lock successfully */ + udelay(150); + + if (cfg->has_pll_test) { + val |= CLK_REF_SEL; + + writel(val, qphy->base + QUSB2PHY_PLL_TEST); + + /* ensure above write is through */ + readl(qphy->base + QUSB2PHY_PLL_TEST); + } + + /* Required to get phy pll lock successfully */ + udelay(100); + + val = readb(qphy->base + cfg->regs[QUSB2PHY_PLL_STATUS]); + if (!(val & cfg->mask_core_ready)) { + pr_err("QUSB2PHY pll lock failed: status reg = %x\n", val); + ret = -EBUSY; + return ret; + } + + return 0; +} + +static int qusb2phy_power_off(struct phy *phy) +{ + struct qusb2_phy *qphy = dev_get_priv(phy->dev); + + /* Disable the PHY */ + qusb2_setbits(qphy->base, qphy->cfg->regs[QUSB2PHY_PORT_POWERDOWN], + qphy->cfg->disable_ctrl); + + reset_assert(&qphy->phy_rst); + + clk_disable(&qphy->cfg_ahb_clk); + + return 0; +} + +static int qusb2phy_clk_init(struct udevice *dev, struct qusb2_phy *qphy) +{ + int ret; + + /* We ignore the ref clock as we currently lack a driver for rpmcc/rpmhcc where + * it usually comes from - we assume it's always on. + */ + ret = clk_get_by_name(dev, "cfg_ahb", &qphy->cfg_ahb_clk); + if (ret == -ENOSYS || ret == -ENOENT) + return 0; + if (ret) + return ret; + + ret = clk_enable(&qphy->cfg_ahb_clk); + if (ret) { + return ret; + } + + return 0; +} + +static int qusb2phy_probe(struct udevice *dev) +{ + struct qusb2_phy *qphy = dev_get_priv(dev); + int ret; + + qphy->base = (void __iomem *)dev_read_addr(dev); + if (IS_ERR(qphy->base)) + return PTR_ERR(qphy->base); + + ret = qusb2phy_clk_init(dev, qphy); + if (ret) { + printf("%s: Couldn't get clocks: %d\n", __func__, ret); + return ret; + } + + ret = reset_get_by_index(dev, 0, &qphy->phy_rst); + if (ret) { + printf("%s: Couldn't get resets: %d\n", __func__, ret); + return ret; + } + + qphy->cfg = (const struct qusb2_phy_cfg *)dev_get_driver_data(dev); + if (!qphy->cfg) { + printf("%s: Couldn't get driver data\n", __func__); + return -EINVAL; + } + + debug("%s success qusb phy cfg %p\n", __func__, qphy->cfg); + return 0; +} + +static struct phy_ops qusb2phy_ops = { + .power_on = qusb2phy_power_on, + .power_off = qusb2phy_power_off, +}; + +static const struct udevice_id qusb2phy_ids[] = { + { .compatible = "qcom,qusb2-phy" }, + { .compatible = "qcom,qcm2290-qusb2-phy", + .data = (ulong)&sm6115_phy_cfg }, + { .compatible = "qcom,sm6115-qusb2-phy", + .data = (ulong)&sm6115_phy_cfg }, + { .compatible = "qcom,qusb2-v2-phy", .data = (ulong)&qusb2_v2_phy_cfg }, + {} +}; + +U_BOOT_DRIVER(qcom_qusb2_phy) = { + .name = "qcom-qusb2-phy", + .id = UCLASS_PHY, + .of_match = qusb2phy_ids, + .ops = &qusb2phy_ops, + .probe = qusb2phy_probe, + .priv_auto = sizeof(struct qusb2_phy), +};