diff --git a/drivers/phy/qcom/Kconfig b/drivers/phy/qcom/Kconfig
index 361dfb6e1126..b9fe608c2798 100644
--- a/drivers/phy/qcom/Kconfig
+++ b/drivers/phy/qcom/Kconfig
@@ -18,8 +18,16 @@ config PHY_QCOM_QUSB2
 	help
 	  Enable this to support the Super-Speed USB transceiver on various
 	  Qualcomm chipsets.
 
+config PHY_QCOM_USB_SNPS_FEMTO_V2
+	tristate "Qualcomm SNPS FEMTO USB HS PHY v2"
+	depends on PHY && ARCH_SNAPDRAGON
+	help
+	  Enable this to support the Qualcomm Synopsys DesignWare Core 7nm
+	  High-Speed PHY driver. This driver supports the Hi-Speed PHY which
+	  is usually paired with Synopsys DWC3 USB IPs on MSM SOCs.
+
 config PHY_QCOM_USB_HS_28NM
 	tristate "Qualcomm 28nm High-Speed PHY"
 	depends on PHY && ARCH_SNAPDRAGON
 	help
diff --git a/drivers/phy/qcom/Makefile b/drivers/phy/qcom/Makefile
index f6af985666a4..5f4db4a53788 100644
--- a/drivers/phy/qcom/Makefile
+++ b/drivers/phy/qcom/Makefile
@@ -1,5 +1,6 @@
 obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o
 obj-$(CONFIG_MSM8916_USB_PHY) += msm8916-usbh-phy.o
 obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o
+obj-$(CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2) += phy-qcom-snps-femto-v2.o
 obj-$(CONFIG_PHY_QCOM_USB_HS_28NM) += phy-qcom-usb-hs-28nm.o
 obj-$(CONFIG_PHY_QCOM_USB_SS) += phy-qcom-usb-ss.o
diff --git a/drivers/phy/qcom/phy-qcom-snps-femto-v2.c b/drivers/phy/qcom/phy-qcom-snps-femto-v2.c
new file mode 100644
index 000000000000..a1675b664e46
--- /dev/null
+++ b/drivers/phy/qcom/phy-qcom-snps-femto-v2.c
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2023 Bhupesh Sharma <bhupesh.sharma@linaro.org>
+ *
+ * Based on Linux driver
+ */
+
+#include <clk.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <dm/devres.h>
+#include <generic-phy.h>
+#include <malloc.h>
+#include <reset.h>
+
+#include <asm/io.h>
+#include <linux/bitops.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+
+#define USB2_PHY_USB_PHY_UTMI_CTRL0 (0x3c)
+#define SLEEPM BIT(0)
+#define OPMODE_MASK GENMASK(4, 3)
+#define OPMODE_NORMAL (0x00)
+#define OPMODE_NONDRIVING BIT(3)
+#define TERMSEL BIT(5)
+
+#define USB2_PHY_USB_PHY_UTMI_CTRL5 (0x50)
+#define POR BIT(1)
+
+#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0 (0x54)
+#define SIDDQ BIT(2)
+#define RETENABLEN BIT(3)
+#define FSEL_MASK GENMASK(6, 4)
+#define FSEL_DEFAULT (0x3 << 4)
+
+#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1 (0x58)
+#define VBUSVLDEXTSEL0 BIT(4)
+#define PLLBTUNE BIT(5)
+
+#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2 (0x5c)
+#define VREGBYPASS BIT(0)
+
+#define USB2_PHY_USB_PHY_HS_PHY_CTRL1 (0x60)
+#define VBUSVLDEXT0 BIT(0)
+
+#define USB2_PHY_USB_PHY_HS_PHY_CTRL2 (0x64)
+#define USB2_AUTO_RESUME BIT(0)
+#define USB2_SUSPEND_N BIT(2)
+#define USB2_SUSPEND_N_SEL BIT(3)
+
+#define USB2_PHY_USB_PHY_CFG0 (0x94)
+#define UTMI_PHY_DATAPATH_CTRL_OVERRIDE_EN BIT(0)
+#define UTMI_PHY_CMN_CTRL_OVERRIDE_EN BIT(1)
+
+#define USB2_PHY_USB_PHY_REFCLK_CTRL (0xa0)
+#define REFCLK_SEL_MASK GENMASK(1, 0)
+#define REFCLK_SEL_DEFAULT (0x2 << 0)
+
+struct qcom_snps_hsphy {
+	void __iomem *base;
+	struct clk_bulk clks;
+	struct reset_ctl_bulk resets;
+};
+
+/*
+ * We should just be able to use clrsetbits_le32() here, but this results
+ * in crashes on some boards. This is suspected to be because of some bus
+ * arbitration quirks with the PHY (i.e. it takes several bus clock cycles
+ * for the write to actually go through). The readl_relaxed() at the end will
+ * block until the write is completed (and all registers updated), and thus
+ * ensure that we don't access the PHY registers when they're in an
+ * undetermined state.
+ */
+static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset,
+					      u32 mask, u32 val)
+{
+	u32 reg;
+
+	reg = readl_relaxed(base + offset);
+
+	reg &= ~mask;
+	reg |= val & mask;
+	writel_relaxed(reg, base + offset);
+
+	/* Ensure above write is completed */
+	readl_relaxed(base + offset);
+}
+
+static int qcom_snps_hsphy_usb_init(struct phy *phy)
+{
+	struct qcom_snps_hsphy *priv = dev_get_priv(phy->dev);
+
+	qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_CFG0,
+				   UTMI_PHY_CMN_CTRL_OVERRIDE_EN,
+				   UTMI_PHY_CMN_CTRL_OVERRIDE_EN);
+	qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_UTMI_CTRL5, POR,
+				   POR);
+	qcom_snps_hsphy_write_mask(priv->base,
+				   USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0, FSEL_MASK, 0);
+	qcom_snps_hsphy_write_mask(priv->base,
+				   USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1,
+				   PLLBTUNE, PLLBTUNE);
+	qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_REFCLK_CTRL,
+				   REFCLK_SEL_DEFAULT, REFCLK_SEL_MASK);
+	qcom_snps_hsphy_write_mask(priv->base,
+				   USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1,
+				   VBUSVLDEXTSEL0, VBUSVLDEXTSEL0);
+	qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_HS_PHY_CTRL1,
+				   VBUSVLDEXT0, VBUSVLDEXT0);
+
+	qcom_snps_hsphy_write_mask(priv->base,
+				   USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2,
+				   VREGBYPASS, VREGBYPASS);
+
+	qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2,
+				   USB2_SUSPEND_N_SEL | USB2_SUSPEND_N,
+				   USB2_SUSPEND_N_SEL | USB2_SUSPEND_N);
+
+	qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_UTMI_CTRL0,
+				   SLEEPM, SLEEPM);
+
+	qcom_snps_hsphy_write_mask(
+		priv->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0, SIDDQ, 0);
+
+	qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_UTMI_CTRL5, POR,
+				   0);
+
+	qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2,
+				   USB2_SUSPEND_N_SEL, 0);
+
+	qcom_snps_hsphy_write_mask(priv->base, USB2_PHY_USB_PHY_CFG0,
+				   UTMI_PHY_CMN_CTRL_OVERRIDE_EN, 0);
+
+	return 0;
+}
+
+static int qcom_snps_hsphy_power_on(struct phy *phy)
+{
+	struct qcom_snps_hsphy *priv = dev_get_priv(phy->dev);
+	int ret;
+
+	clk_enable_bulk(&priv->clks);
+
+	ret = reset_deassert_bulk(&priv->resets);
+	if (ret)
+		return ret;
+
+	ret = qcom_snps_hsphy_usb_init(phy);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int qcom_snps_hsphy_power_off(struct phy *phy)
+{
+	struct qcom_snps_hsphy *priv = dev_get_priv(phy->dev);
+
+	reset_assert_bulk(&priv->resets);
+	clk_disable_bulk(&priv->clks);
+
+	return 0;
+}
+
+static int qcom_snps_hsphy_phy_probe(struct udevice *dev)
+{
+	struct qcom_snps_hsphy *priv = dev_get_priv(dev);
+	int ret;
+
+	priv->base = dev_read_addr_ptr(dev);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	ret = clk_get_bulk(dev, &priv->clks);
+	if (ret < 0 && ret != -ENOENT) {
+		printf("%s: Failed to get clocks %d\n", __func__, ret);
+		return ret;
+	}
+
+	ret = reset_get_bulk(dev, &priv->resets);
+	if (ret < 0) {
+		printf("failed to get resets, ret = %d\n", ret);
+		return ret;
+	}
+
+	clk_enable_bulk(&priv->clks);
+	reset_deassert_bulk(&priv->resets);
+
+	return 0;
+}
+
+static struct phy_ops qcom_snps_hsphy_phy_ops = {
+	.power_on = qcom_snps_hsphy_power_on,
+	.power_off = qcom_snps_hsphy_power_off,
+};
+
+static const struct udevice_id qcom_snps_hsphy_phy_ids[] = {
+	{ .compatible = "qcom,sm8150-usb-hs-phy" },
+	{ .compatible = "qcom,usb-snps-hs-5nm-phy" },
+	{ .compatible = "qcom,usb-snps-hs-7nm-phy" },
+	{ .compatible = "qcom,usb-snps-femto-v2-phy" },
+	{}
+};
+
+U_BOOT_DRIVER(qcom_usb_qcom_snps_hsphy) = {
+	.name = "qcom-snps-hsphy",
+	.id = UCLASS_PHY,
+	.of_match = qcom_snps_hsphy_phy_ids,
+	.ops = &qcom_snps_hsphy_phy_ops,
+	.probe = qcom_snps_hsphy_phy_probe,
+	.priv_auto = sizeof(struct qcom_snps_hsphy),
+};
