diff mbox series

[v4,23/38] mmc: exynos_dw_mmc: Read upstream SDR timing properties

Message ID 20240725204520.18134-24-semen.protsenko@linaro.org
State Superseded
Headers show
Series mmc: dw_mmc: Enable eMMC on E850-96 board | expand

Commit Message

Sam Protsenko July 25, 2024, 8:45 p.m. UTC 
The obsolete "samsung,timing" dts property is now split into
"samsung,dw-mshc-ciu-div" (for holding the internal DW MMC divider
value) and "samsung,dw-mshc-sdr-timing" (for actual timing values) in
upstream Linux kernel. Rework the driver to make use of new properties
instead of the old one. All affected dts files were already updated
accordingly.

No functional change.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
---
Changes in v4:
  - (none)

Changes in v3:
  - (none)

Changes in v2:
  - (none)

 drivers/mmc/exynos_dw_mmc.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c
index 50d0208b29fd..4108af47e518 100644
--- a/drivers/mmc/exynos_dw_mmc.c
+++ b/drivers/mmc/exynos_dw_mmc.c
@@ -227,7 +227,7 @@  static int exynos_dwmmc_of_to_plat(struct udevice *dev)
 	struct dwmci_exynos_priv_data *priv = dev_get_priv(dev);
 	struct dwmci_host *host = &priv->host;
 	int err = 0;
-	u32 timing[3];
+	u32 div, timing[2];
 
 #ifdef CONFIG_CPU_V7A
 	const void *blob = gd->fdt_blob;
@@ -262,16 +262,16 @@  static int exynos_dwmmc_of_to_plat(struct udevice *dev)
 	}
 
 	/* Extract the timing info from the node */
-	err = dev_read_u32_array(dev, "samsung,timing", timing, 3);
+	div = dev_read_u32_default(dev, "samsung,dw-mshc-ciu-div", 0);
+	err = dev_read_u32_array(dev, "samsung,dw-mshc-sdr-timing", timing, 2);
 	if (err) {
-		printf("DWMMC%d: Can't get sdr-timings for devider\n",
-				host->dev_index);
+		printf("DWMMC%d: Can't get sdr-timings\n", host->dev_index);
 		return -EINVAL;
 	}
 
-	priv->sdr_timing = (DWMCI_SET_SAMPLE_CLK(timing[0]) |
-			DWMCI_SET_DRV_CLK(timing[1]) |
-			DWMCI_SET_DIV_RATIO(timing[2]));
+	priv->sdr_timing = DWMCI_SET_SAMPLE_CLK(timing[0]) |
+			   DWMCI_SET_DRV_CLK(timing[1]) |
+			   DWMCI_SET_DIV_RATIO(div);
 
 	/* sdr_timing didn't assigned anything, use the default value */
 	if (!priv->sdr_timing) {