diff mbox series

[v5,29/38] mmc: exynos_dw_mmc: Read and use DDR timing when available

Message ID 20240808031444.9619-30-semen.protsenko@linaro.org
State Accepted
Commit 4f89f6029af82dc9ef18e8c23f25d9f158878a9e
Headers show
Series mmc: dw_mmc: Enable eMMC on E850-96 board | expand

Commit Message

Sam Protsenko Aug. 8, 2024, 3:14 a.m. UTC 
DDR timing values should be defined in "samsung,dw-mshc-ddr-timing" dts
property, and used when DDR MMC mode is selected. Read that value from
dts and use it. If it's not available, use SDR timing values instead.
This change is following upstream Linux kernel implementation.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
---
Changes in v5:
  - (none)

Changes in v4:
  - (none)

Changes in v3:
  - (none)

Changes in v2:
  - (none)

 drivers/mmc/exynos_dw_mmc.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c
index b9d655c0d5c8..32f3ea168b6c 100644
--- a/drivers/mmc/exynos_dw_mmc.c
+++ b/drivers/mmc/exynos_dw_mmc.c
@@ -52,6 +52,7 @@  struct dwmci_exynos_priv_data {
 #endif
 	struct clk clk;
 	u32 sdr_timing;
+	u32 ddr_timing;
 	const struct exynos_dwmmc_variant *chip;
 };
 
@@ -127,8 +128,14 @@  static int exynos_dwmmc_set_sclk(struct dwmci_host *host, unsigned long rate)
 static int exynos_dwmci_clksel(struct dwmci_host *host)
 {
 	struct dwmci_exynos_priv_data *priv = exynos_dwmmc_get_priv(host);
+	u32 timing;
 
-	dwmci_writel(host, priv->chip->clksel, priv->sdr_timing);
+	if (host->mmc->selected_mode == MMC_DDR_52)
+		timing = priv->ddr_timing;
+	else
+		timing = priv->sdr_timing;
+
+	dwmci_writel(host, priv->chip->clksel, timing);
 
 	return 0;
 }
@@ -305,6 +312,17 @@  static int exynos_dwmmc_of_to_plat(struct udevice *dev)
 			priv->sdr_timing = DWMMC_MMC2_SDR_TIMING_VAL;
 	}
 
+	err = dev_read_u32_array(dev, "samsung,dw-mshc-ddr-timing", timing, 2);
+	if (err) {
+		debug("DWMMC%d: Can't get ddr-timings, using sdr-timings\n",
+		      host->dev_index);
+		priv->ddr_timing = priv->sdr_timing;
+	} else {
+		priv->ddr_timing = DWMCI_SET_SAMPLE_CLK(timing[0]) |
+				   DWMCI_SET_DRV_CLK(timing[1]) |
+				   DWMCI_SET_DIV_RATIO(div);
+	}
+
 	host->fifo_depth = dev_read_u32_default(dev, "fifo-depth", 0);
 	host->bus_hz = dev_read_u32_default(dev, "clock-frequency", 0);