From patchwork Thu Apr 7 15:07:37 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Laszlo Ersek X-Patchwork-Id: 65332 Delivered-To: patch@linaro.org Received: by 10.112.43.237 with SMTP id z13csp132694lbl; Thu, 7 Apr 2016 08:07:50 -0700 (PDT) X-Received: by 10.98.75.214 with SMTP id d83mr5390502pfj.22.1460041668690; Thu, 07 Apr 2016 08:07:48 -0700 (PDT) Return-Path: Received: from ml01.01.org (ml01.01.org. [2001:19d0:306:5::1]) by mx.google.com with ESMTPS id s11si600967pal.172.2016.04.07.08.07.48 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Thu, 07 Apr 2016 08:07:48 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of edk2-devel-bounces@lists.01.org designates 2001:19d0:306:5::1 as permitted sender) client-ip=2001:19d0:306:5::1; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of edk2-devel-bounces@lists.01.org designates 2001:19d0:306:5::1 as permitted sender) smtp.mailfrom=edk2-devel-bounces@lists.01.org Received: from [127.0.0.1] (localhost [IPv6:::1]) by ml01.01.org (Postfix) with ESMTP id 7D02C1A1FB7; Thu, 7 Apr 2016 08:07:47 -0700 (PDT) X-Original-To: edk2-devel@ml01.01.org Delivered-To: edk2-devel@ml01.01.org Received: from mx1.redhat.com (mx1.redhat.com [209.132.183.28]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ml01.01.org (Postfix) with ESMTPS id 08C7C1A1F6D for ; Thu, 7 Apr 2016 08:07:46 -0700 (PDT) Received: from int-mx14.intmail.prod.int.phx2.redhat.com (int-mx14.intmail.prod.int.phx2.redhat.com [10.5.11.27]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mx1.redhat.com (Postfix) with ESMTPS id 8C9CD65408; Thu, 7 Apr 2016 15:07:45 +0000 (UTC) Received: from lacos-laptop-7.usersys.redhat.com (ovpn-113-93.phx2.redhat.com [10.3.113.93]) by int-mx14.intmail.prod.int.phx2.redhat.com (8.14.4/8.14.4) with ESMTP id u37F7fX7017397; Thu, 7 Apr 2016 11:07:44 -0400 From: Laszlo Ersek To: edk2-devel-01 Date: Thu, 7 Apr 2016 17:07:37 +0200 Message-Id: <1460041657-31598-3-git-send-email-lersek@redhat.com> In-Reply-To: <1460041657-31598-1-git-send-email-lersek@redhat.com> References: <1460041657-31598-1-git-send-email-lersek@redhat.com> X-Scanned-By: MIMEDefang 2.68 on 10.5.11.27 X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-4.5.16 (mx1.redhat.com [10.5.110.39]); Thu, 07 Apr 2016 15:07:45 +0000 (UTC) Subject: [edk2] [PATCH 2/2] OvmfPkg: remove PciHostBridgeDxe fork X-BeenThere: edk2-devel@lists.01.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: EDK II Development List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , Cc: Jordan Justen MIME-Version: 1.0 Errors-To: edk2-devel-bounces@lists.01.org Sender: "edk2-devel" This driver is now unused. Cc: Jordan Justen Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek --- OvmfPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf | 64 - OvmfPkg/PciHostBridgeDxe/IoFifo.h | 176 -- OvmfPkg/PciHostBridgeDxe/PciHostBridge.h | 651 ----- OvmfPkg/PciHostBridgeDxe/PciHostBridge.c | 1551 ------------ OvmfPkg/PciHostBridgeDxe/PciRootBridgeIo.c | 2628 -------------------- OvmfPkg/PciHostBridgeDxe/Ia32/IoFifo.nasm | 136 - OvmfPkg/PciHostBridgeDxe/X64/IoFifo.nasm | 125 - 7 files changed, 5331 deletions(-) -- 1.8.3.1 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel diff --git a/OvmfPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf b/OvmfPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf deleted file mode 100644 index edf1657267c4..000000000000 --- a/OvmfPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf +++ /dev/null @@ -1,64 +0,0 @@ -## @file -# The basic interfaces implementation to a single segment PCI Host Bridge -# driver. -# -# Copyright (c) 2008 - 2014, Intel Corporation. All rights reserved.
-# -# This program and the accompanying materials are licensed and made available -# under the terms and conditions of the BSD License which accompanies this -# distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR -# IMPLIED. -# -## - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = PciHostBridge - FILE_GUID = 311161C5-BFD9-4504-8016-213F2DAEDAF3 - MODULE_TYPE = DXE_DRIVER - VERSION_STRING = 1.0 - - ENTRY_POINT = InitializePciHostBridge - -[Packages] - MdePkg/MdePkg.dec - OvmfPkg/OvmfPkg.dec - -[LibraryClasses] - UefiDriverEntryPoint - UefiBootServicesTableLib - DxeServicesTableLib - UefiLib - MemoryAllocationLib - BaseMemoryLib - BaseLib - DebugLib - DevicePathLib - IoLib - PciLib - QemuFwCfgLib - -[Sources] - PciHostBridge.c - PciRootBridgeIo.c - PciHostBridge.h - IoFifo.h - -[Sources.IA32] - Ia32/IoFifo.nasm - -[Sources.X64] - X64/IoFifo.nasm - -[Protocols] - gEfiPciHostBridgeResourceAllocationProtocolGuid ## PRODUCES - gEfiPciRootBridgeIoProtocolGuid ## PRODUCES - gEfiMetronomeArchProtocolGuid ## CONSUMES - gEfiDevicePathProtocolGuid ## PRODUCES - -[depex] - gEfiMetronomeArchProtocolGuid diff --git a/OvmfPkg/PciHostBridgeDxe/IoFifo.h b/OvmfPkg/PciHostBridgeDxe/IoFifo.h deleted file mode 100644 index 9978f8bfc39a..000000000000 --- a/OvmfPkg/PciHostBridgeDxe/IoFifo.h +++ /dev/null @@ -1,176 +0,0 @@ -/** @file - I/O FIFO routines - - Copyright (c) 2008 - 2012, Intel Corporation. All rights reserved.
- - This program and the accompanying materials are licensed and made available - under the terms and conditions of the BSD License which accompanies this - distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef _IO_FIFO_H_INCLUDED_ -#define _IO_FIFO_H_INCLUDED_ - -/** - Reads an 8-bit I/O port fifo into a block of memory. - - Reads the 8-bit I/O fifo port specified by Port. - - The port is read Count times, and the read data is - stored in the provided Buffer. - - This function must guarantee that all I/O read and write operations are - serialized. - - If 8-bit I/O port operations are not supported, then ASSERT(). - - @param Port The I/O port to read. - @param Count The number of times to read I/O port. - @param Buffer The buffer to store the read data into. - -**/ -VOID -EFIAPI -IoReadFifo8 ( - IN UINTN Port, - IN UINTN Count, - OUT VOID *Buffer - ); - -/** - Reads a 16-bit I/O port fifo into a block of memory. - - Reads the 16-bit I/O fifo port specified by Port. - - The port is read Count times, and the read data is - stored in the provided Buffer. - - This function must guarantee that all I/O read and write operations are - serialized. - - If 16-bit I/O port operations are not supported, then ASSERT(). - - @param Port The I/O port to read. - @param Count The number of times to read I/O port. - @param Buffer The buffer to store the read data into. - -**/ -VOID -EFIAPI -IoReadFifo16 ( - IN UINTN Port, - IN UINTN Count, - OUT VOID *Buffer - ); - -/** - Reads a 32-bit I/O port fifo into a block of memory. - - Reads the 32-bit I/O fifo port specified by Port. - - The port is read Count times, and the read data is - stored in the provided Buffer. - - This function must guarantee that all I/O read and write operations are - serialized. - - If 32-bit I/O port operations are not supported, then ASSERT(). - - @param Port The I/O port to read. - @param Count The number of times to read I/O port. - @param Buffer The buffer to store the read data into. - -**/ -VOID -EFIAPI -IoReadFifo32 ( - IN UINTN Port, - IN UINTN Count, - OUT VOID *Buffer - ); - -/** - Writes a block of memory into an 8-bit I/O port fifo. - - Writes the 8-bit I/O fifo port specified by Port. - - The port is written Count times, and the write data is - retrieved from the provided Buffer. - - This function must guarantee that all I/O write and write operations are - serialized. - - If 8-bit I/O port operations are not supported, then ASSERT(). - - @param Port The I/O port to write. - @param Count The number of times to write I/O port. - @param Buffer The buffer to store the write data into. - -**/ -VOID -EFIAPI -IoWriteFifo8 ( - IN UINTN Port, - IN UINTN Count, - OUT VOID *Buffer - ); - -/** - Writes a block of memory into a 16-bit I/O port fifo. - - Writes the 16-bit I/O fifo port specified by Port. - - The port is written Count times, and the write data is - retrieved from the provided Buffer. - - This function must guarantee that all I/O write and write operations are - serialized. - - If 16-bit I/O port operations are not supported, then ASSERT(). - - @param Port The I/O port to write. - @param Count The number of times to write I/O port. - @param Buffer The buffer to store the write data into. - -**/ -VOID -EFIAPI -IoWriteFifo16 ( - IN UINTN Port, - IN UINTN Count, - OUT VOID *Buffer - ); - -/** - Writes a block of memory into a 32-bit I/O port fifo. - - Writes the 32-bit I/O fifo port specified by Port. - - The port is written Count times, and the write data is - retrieved from the provided Buffer. - - This function must guarantee that all I/O write and write operations are - serialized. - - If 32-bit I/O port operations are not supported, then ASSERT(). - - @param Port The I/O port to write. - @param Count The number of times to write I/O port. - @param Buffer The buffer to store the write data into. - -**/ -VOID -EFIAPI -IoWriteFifo32 ( - IN UINTN Port, - IN UINTN Count, - OUT VOID *Buffer - ); - -#endif - diff --git a/OvmfPkg/PciHostBridgeDxe/PciHostBridge.h b/OvmfPkg/PciHostBridgeDxe/PciHostBridge.h deleted file mode 100644 index 617c68e31847..000000000000 --- a/OvmfPkg/PciHostBridgeDxe/PciHostBridge.h +++ /dev/null @@ -1,651 +0,0 @@ -/** @file - The Header file of the Pci Host Bridge Driver - - Copyright (C) 2015, Red Hat, Inc. - Copyright (c) 2008 - 2010, Intel Corporation. All rights reserved.
- - This program and the accompanying materials are licensed and made available - under the terms and conditions of the BSD License which accompanies this - distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -**/ - -#ifndef _PCI_HOST_BRIDGE_H_ -#define _PCI_HOST_BRIDGE_H_ - -#include - -#include -#include - -#include -#include -#include -#include - - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define MAX_PCI_DEVICE_NUMBER 31 -#define MAX_PCI_FUNCTION_NUMBER 7 -#define MAX_PCI_REG_ADDRESS 0xFF - -typedef enum { - IoOperation, - MemOperation, - PciOperation -} OPERATION_TYPE; - -#define PCI_HOST_BRIDGE_SIGNATURE SIGNATURE_32('e', 'h', 's', 't') -typedef struct { - UINTN Signature; - EFI_HANDLE HostBridgeHandle; - LIST_ENTRY Head; - BOOLEAN ResourceSubmited; - BOOLEAN CanRestarted; - EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL ResAlloc; -} PCI_HOST_BRIDGE_INSTANCE; - -#define INSTANCE_FROM_RESOURCE_ALLOCATION_THIS(a) \ - CR(a, PCI_HOST_BRIDGE_INSTANCE, ResAlloc, PCI_HOST_BRIDGE_SIGNATURE) - -// -// HostBridge Resource Allocation interface -// - -/** - These are the notifications from the PCI bus driver that it is about to enter - a certain phase of the PCI enumeration process. - - This member function can be used to notify the host bridge driver to perform - specific actions, including any chipset-specific initialization, so that the - chipset is ready to enter the next phase. Eight notification points are - defined at this time. See belows: - - EfiPciHostBridgeBeginEnumeration Resets the host bridge PCI apertures - and internal data structures. The PCI - enumerator should issue this - notification before starting a fresh - enumeration process. Enumeration - cannot be restarted after sending any - other notification such as - EfiPciHostBridgeBeginBusAllocation. - - EfiPciHostBridgeBeginBusAllocation The bus allocation phase is about to - begin. No specific action is required - here. This notification can be used to - perform any chipset-specific - programming. - - EfiPciHostBridgeEndBusAllocation The bus allocation and bus programming - phase is complete. No specific action - is required here. This notification - can be used to perform any - chipset-specific programming. - - EfiPciHostBridgeBeginResourceAllocation - The resource allocation phase is about - to begin. No specific action is - required here. This notification can - be used to perform any - chipset-specific programming. - - EfiPciHostBridgeAllocateResources Allocates resources per previously - submitted requests for all the PCI - root bridges. These resource settings - are returned on the next call to - GetProposedResources(). Before calling - NotifyPhase() with a Phase of - EfiPciHostBridgeAllocateResource, the - PCI bus enumerator is responsible for - gathering I/O and memory requests for - all the PCI root bridges and - submitting these requests using - SubmitResources(). This function pads - the resource amount to suit the root - bridge hardware, takes care of - dependencies between the PCI root - bridges, and calls the Global - Coherency Domain (GCD) with the - allocation request. In the case of - padding, the allocated range could be - bigger than what was requested. - - EfiPciHostBridgeSetResources Programs the host bridge hardware to - decode previously allocated resources - (proposed resources) for all the PCI - root bridges. After the hardware is - programmed, reassigning resources will - not be supported. The bus settings are - not affected. - - EfiPciHostBridgeFreeResources Deallocates resources that were - previously allocated for all the PCI - root bridges and resets the I/O and - memory apertures to their initial - state. The bus settings are not - affected. If the request to allocate - resources fails, the PCI enumerator - can use this notification to - deallocate previous resources, adjust - the requests, and retry allocation. - - EfiPciHostBridgeEndResourceAllocation The resource allocation phase is - completed. No specific action is - required here. This notification can - be used to perform any chipsetspecific - programming. - - @param[in] This The instance pointer of - EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - - @param[in] Phase The phase during enumeration - - @retval EFI_NOT_READY This phase cannot be entered at this time. For - example, this error is valid for a Phase of - EfiPciHostBridgeAllocateResources if - SubmitResources() has not been called for one - or more PCI root bridges before this call - - @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. - This error is valid for a Phase of - EfiPciHostBridgeSetResources. - - @retval EFI_INVALID_PARAMETER Invalid phase parameter - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. This error is valid for a - Phase of EfiPciHostBridgeAllocateResources if - the previously submitted resource requests - cannot be fulfilled or were only partially - fulfilled. - - @retval EFI_SUCCESS The notification was accepted without any - errors. -**/ -EFI_STATUS -EFIAPI -NotifyPhase( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE Phase - ); - -/** - Return the device handle of the next PCI root bridge that is associated with - this Host Bridge. - - This function is called multiple times to retrieve the device handles of all - the PCI root bridges that are associated with this PCI host bridge. Each PCI - host bridge is associated with one or more PCI root bridges. On each call, - the handle that was returned by the previous call is passed into the - interface, and on output the interface returns the device handle of the next - PCI root bridge. The caller can use the handle to obtain the instance of the - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL for that root bridge. When there are no more - PCI root bridges to report, the interface returns EFI_NOT_FOUND. A PCI - enumerator must enumerate the PCI root bridges in the order that they are - returned by this function. - - For D945 implementation, there is only one root bridge in PCI host bridge. - - @param[in] This The instance pointer of - EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - - @param[in, out] RootBridgeHandle Returns the device handle of the next PCI - root bridge. - - @retval EFI_SUCCESS If parameter RootBridgeHandle = NULL, then - return the first Rootbridge handle of the - specific Host bridge and return EFI_SUCCESS. - - @retval EFI_NOT_FOUND Can not find the any more root bridge in - specific host bridge. - - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not an EFI_HANDLE that was - returned on a previous call to - GetNextRootBridge(). -**/ -EFI_STATUS -EFIAPI -GetNextRootBridge( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN OUT EFI_HANDLE *RootBridgeHandle - ); - -/** - Returns the allocation attributes of a PCI root bridge. - - The function returns the allocation attributes of a specific PCI root bridge. - The attributes can vary from one PCI root bridge to another. These attributes - are different from the decode-related attributes that are returned by the - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.GetAttributes() member function. The - RootBridgeHandle parameter is used to specify the instance of the PCI root - bridge. The device handles of all the root bridges that are associated with - this host bridge must be obtained by calling GetNextRootBridge(). The - attributes are static in the sense that they do not change during or after - the enumeration process. The hardware may provide mechanisms to change the - attributes on the fly, but such changes must be completed before - EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL is installed. The permitted - values of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ATTRIBUTES are defined in - "Related Definitions" below. The caller uses these attributes to combine - multiple resource requests. - - For example, if the flag EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM is set, the PCI - bus enumerator needs to include requests for the prefetchable memory in the - nonprefetchable memory pool and not request any prefetchable memory. - - Attribute Description - ------------------------------------ --------------------------------------- - EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM If this bit is set, then the PCI root - bridge does not support separate - windows for nonprefetchable and - prefetchable memory. A PCI bus driver - needs to include requests for - prefetchable memory in the - nonprefetchable memory pool. - - EFI_PCI_HOST_BRIDGE_MEM64_DECODE If this bit is set, then the PCI root - bridge supports 64-bit memory windows. - If this bit is not set, the PCI bus - driver needs to include requests for a - 64-bit memory address in the - corresponding 32-bit memory pool. - - @param[in] This The instance pointer of - EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - - @param[in] RootBridgeHandle The device handle of the PCI root bridge in - which the caller is interested. Type - EFI_HANDLE is defined in - InstallProtocolInterface() in the UEFI 2.0 - Specification. - - @param[out] Attributes The pointer to attribte of root bridge, it is - output parameter - - @retval EFI_INVALID_PARAMETER Attribute pointer is NULL - - @retval EFI_INVALID_PARAMETER RootBridgehandle is invalid. - - @retval EFI_SUCCESS Success to get attribute of interested root - bridge. -**/ -EFI_STATUS -EFIAPI -GetAttributes( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - OUT UINT64 *Attributes - ); - -/** - Sets up the specified PCI root bridge for the bus enumeration process. - - This member function sets up the root bridge for bus enumeration and returns - the PCI bus range over which the search should be performed in ACPI 2.0 - resource descriptor format. - - @param[in] This The - EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - instance. - - @param[in] RootBridgeHandle The PCI Root Bridge to be set up. - - @param[out] Configuration Pointer to the pointer to the PCI bus resource - descriptor. - - @retval EFI_INVALID_PARAMETER Invalid Root bridge's handle - - @retval EFI_OUT_OF_RESOURCES Fail to allocate ACPI resource descriptor tag. - - @retval EFI_SUCCESS Sucess to allocate ACPI resource descriptor. -**/ -EFI_STATUS -EFIAPI -StartBusEnumeration( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - OUT VOID **Configuration - ); - -/** - Programs the PCI root bridge hardware so that it decodes the specified PCI - bus range. - - This member function programs the specified PCI root bridge to decode the bus - range that is specified by the input parameter Configuration. - The bus range information is specified in terms of the ACPI 2.0 resource - descriptor format. - - @param[in] This The - EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - instance - - @param[in] RootBridgeHandle The PCI Root Bridge whose bus range is to be - programmed - - @param[in] Configuration The pointer to the PCI bus resource descriptor - - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge - handle. - - @retval EFI_INVALID_PARAMETER Configuration is NULL. - - @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI - 2.0 resource descriptor. - - @retval EFI_INVALID_PARAMETER Configuration does not include a valid ACPI - 2.0 bus resource descriptor. - - @retval EFI_INVALID_PARAMETER Configuration includes valid ACPI 2.0 resource - descriptors other than bus descriptors. - - @retval EFI_INVALID_PARAMETER Configuration contains one or more invalid - ACPI resource descriptors. - - @retval EFI_INVALID_PARAMETER "Address Range Minimum" is invalid for this - root bridge. - - @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this - root bridge. - - @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. - - @retval EFI_SUCCESS The bus range for the PCI root bridge was - programmed. -**/ -EFI_STATUS -EFIAPI -SetBusNumbers( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - IN VOID *Configuration - ); - -/** - Submits the I/O and memory resource requirements for the specified PCI root - bridge. - - This function is used to submit all the I/O and memory resources that are - required by the specified PCI root bridge. The input parameter Configuration - is used to specify the following: - - The various types of resources that are required - - The associated lengths in terms of ACPI 2.0 resource descriptor format - - @param[in] This Pointer to the - EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - instance. - - @param[in] RootBridgeHandle The PCI root bridge whose I/O and memory - resource requirements are being submitted. - - @param[in] Configuration The pointer to the PCI I/O and PCI memory - resource descriptor. - - @retval EFI_SUCCESS The I/O and memory resource requests for a PCI - root bridge were accepted. - - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge - handle. - - @retval EFI_INVALID_PARAMETER Configuration is NULL. - - @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI - 2.0 resource descriptor. - - @retval EFI_INVALID_PARAMETER Configuration includes requests for one or - more resource types that are not supported by - this PCI root bridge. This error will happen - if the caller did not combine resources - according to Attributes that were returned by - GetAllocAttributes(). - - @retval EFI_INVALID_PARAMETER Address Range Maximum" is invalid. - - @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this PCI - root bridge. - - @retval EFI_INVALID_PARAMETER "Address Space Granularity" is invalid for - this PCI root bridge. -**/ -EFI_STATUS -EFIAPI -SubmitResources( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - IN VOID *Configuration - ); - -/** - Returns the proposed resource settings for the specified PCI root bridge. - - This member function returns the proposed resource settings for the - specified PCI root bridge. The proposed resource settings are prepared when - NotifyPhase() is called with a Phase of EfiPciHostBridgeAllocateResources. - The output parameter Configuration specifies the following: - - The various types of resources, excluding bus resources, that are - allocated - - The associated lengths in terms of ACPI 2.0 resource descriptor format - - @param[in] This Pointer to the - EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - instance. - - @param[in] RootBridgeHandle The PCI root bridge handle. Type EFI_HANDLE is - defined in InstallProtocolInterface() in the - UEFI 2.0 Specification. - - @param[out] Configuration The pointer to the pointer to the PCI I/O and - memory resource descriptor. - - @retval EFI_SUCCESS The requested parameters were returned. - - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge - handle. - - @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. -**/ -EFI_STATUS -EFIAPI -GetProposedResources( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - OUT VOID **Configuration - ); - -/** - Provides the hooks from the PCI bus driver to every PCI controller - (device/function) at various stages of the PCI enumeration process that allow - the host bridge driver to preinitialize individual PCI controllers before - enumeration. - - This function is called during the PCI enumeration process. No specific - action is expected from this member function. It allows the host bridge - driver to preinitialize individual PCI controllers before enumeration. - - @param This Pointer to the - EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - instance. - - @param RootBridgeHandle The associated PCI root bridge handle. Type - EFI_HANDLE is defined in InstallProtocolInterface() - in the UEFI 2.0 Specification. - - @param PciAddress The address of the PCI device on the PCI bus. This - address can be passed to the - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL member functions to - access the PCI configuration space of the device. - See Table 12-1 in the UEFI 2.0 Specification for the - definition of - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS. - - @param Phase The phase of the PCI device enumeration. - - @retval EFI_SUCCESS The requested parameters were returned. - - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge - handle. - - @retval EFI_INVALID_PARAMETER Phase is not a valid phase that is defined - in - EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE. - - @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. - The PCI enumerator should not enumerate this - device, including its child devices if it is - a PCI-to-PCI bridge. -**/ -EFI_STATUS -EFIAPI -PreprocessController ( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS PciAddress, - IN EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE Phase - ); - - -// -// Define resource status constant -// -#define EFI_RESOURCE_NONEXISTENT 0xFFFFFFFFFFFFFFFFULL -#define EFI_RESOURCE_LESS 0xFFFFFFFFFFFFFFFEULL - - -// -// Driver Instance Data Prototypes -// - -typedef struct { - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation; - UINTN NumberOfBytes; - UINTN NumberOfPages; - EFI_PHYSICAL_ADDRESS HostAddress; - EFI_PHYSICAL_ADDRESS MappedHostAddress; -} MAP_INFO; - -typedef struct { - ACPI_HID_DEVICE_PATH AcpiDevicePath; - EFI_DEVICE_PATH_PROTOCOL EndDevicePath; -} EFI_PCI_ROOT_BRIDGE_DEVICE_PATH; - -typedef struct { - UINT64 BusBase; - UINT64 BusLimit; - - UINT64 MemBase; - UINT64 MemLimit; - - UINT64 IoBase; - UINT64 IoLimit; -} PCI_ROOT_BRIDGE_RESOURCE_APERTURE; - -typedef enum { - TypeIo = 0, - TypeMem32, - TypePMem32, - TypeMem64, - TypePMem64, - TypeBus, - TypeMax -} PCI_RESOURCE_TYPE; - -typedef enum { - ResNone = 0, - ResSubmitted, - ResRequested, - ResAllocated, - ResStatusMax -} RES_STATUS; - -typedef struct { - PCI_RESOURCE_TYPE Type; - UINT64 Base; - UINT64 Length; - UINT64 Alignment; - RES_STATUS Status; -} PCI_RES_NODE; - -#pragma pack(1) -typedef struct { - EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR SpaceDesc[TypeMax]; - EFI_ACPI_END_TAG_DESCRIPTOR EndDesc; -} RESOURCE_CONFIGURATION; -#pragma pack() - -#define PCI_ROOT_BRIDGE_SIGNATURE SIGNATURE_32('e', '2', 'p', 'b') - -typedef struct { - UINT32 Signature; - LIST_ENTRY Link; - EFI_HANDLE Handle; - UINT64 RootBridgeAttrib; - UINT64 Attributes; - UINT64 Supports; - - // - // Specific for this memory controller: Bus, I/O, Mem - // - PCI_RES_NODE ResAllocNode[6]; - - // - // Addressing for Memory and I/O and Bus arrange - // - UINT64 BusBase; - UINT64 MemBase; - UINT64 IoBase; - UINT64 BusLimit; - UINT64 MemLimit; - UINT64 IoLimit; - - EFI_PCI_ROOT_BRIDGE_DEVICE_PATH DevicePath; - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL Io; - - RESOURCE_CONFIGURATION ConfigBuffer; -} PCI_ROOT_BRIDGE_INSTANCE; - - -// -// Driver Instance Data Macros -// -#define DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(a) \ - CR(a, PCI_ROOT_BRIDGE_INSTANCE, Io, PCI_ROOT_BRIDGE_SIGNATURE) - - -#define DRIVER_INSTANCE_FROM_LIST_ENTRY(a) \ - CR(a, PCI_ROOT_BRIDGE_INSTANCE, Link, PCI_ROOT_BRIDGE_SIGNATURE) - -/** - - Construct the Pci Root Bridge Io protocol - - @param Protocol Point to protocol instance - @param HostBridgeHandle Handle of host bridge - @param Attri Attribute of host bridge - @param ResAperture ResourceAperture for host bridge - - @retval EFI_SUCCESS Success to initialize the Pci Root Bridge. -**/ -EFI_STATUS -RootBridgeConstructor ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *Protocol, - IN EFI_HANDLE HostBridgeHandle, - IN UINT64 Attri, - IN PCI_ROOT_BRIDGE_RESOURCE_APERTURE *ResAperture - ); - -#endif diff --git a/OvmfPkg/PciHostBridgeDxe/PciHostBridge.c b/OvmfPkg/PciHostBridgeDxe/PciHostBridge.c deleted file mode 100644 index efef2ed79efc..000000000000 --- a/OvmfPkg/PciHostBridgeDxe/PciHostBridge.c +++ /dev/null @@ -1,1551 +0,0 @@ -/** @file - Provides the basic interfaces to abstract a PCI Host Bridge Resource - Allocation - - Copyright (C) 2015, Red Hat, Inc. - Copyright (c) 2008 - 2013, Intel Corporation. All rights reserved.
- - This program and the accompanying materials are licensed and made available - under the terms and conditions of the BSD License which accompanies this - distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#include - -#include "PciHostBridge.h" - -STATIC -CONST -EFI_PCI_ROOT_BRIDGE_DEVICE_PATH mRootBridgeDevicePathTemplate = { - { - { - ACPI_DEVICE_PATH, - ACPI_DP, - { - (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)), - (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8) - } - }, - EISA_PNP_ID(0x0A03), // HID - 0 // UID - }, - - { - END_DEVICE_PATH_TYPE, - END_ENTIRE_DEVICE_PATH_SUBTYPE, - { - END_DEVICE_PATH_LENGTH, - 0 - } - } -}; - -EFI_HANDLE mDriverImageHandle; - -PCI_HOST_BRIDGE_INSTANCE mPciHostBridgeInstanceTemplate = { - PCI_HOST_BRIDGE_SIGNATURE, // Signature - NULL, // HostBridgeHandle - {NULL, NULL}, // Head - FALSE, // ResourceSubiteed - TRUE, // CanRestarted - { - NotifyPhase, - GetNextRootBridge, - GetAttributes, - StartBusEnumeration, - SetBusNumbers, - SubmitResources, - GetProposedResources, - PreprocessController - } -}; - -// -// Implementation -// - -/** - Allocate and initialize a root bridge. - - param[in] RootBusNumber The bus number of the root bus (root bridge) to - create. - - param[in] MaxSubBusNumber The inclusive maximum bus number that can be - assigned to any subordinate bus found behind any - PCI bridge hanging off this root bus. - - The caller is repsonsible for ensuring that - RootBusNumber <= MaxSubBusNumber. If - RootBusNumber equals MaxSubBusNumber, then the - root bus has no room for subordinate buses. - - param[in] HostBridgeHandle The EFI_HANDLE corresponding to the host bridge - that is the parent of the root bridge to create. - HostBridgeHandle is expected to have - EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - installed on it. - - param[out] RootBus The private PCI_ROOT_BRIDGE_INSTANCE that has - been created as the result of the function call. - - @retval EFI_SUCCESS Initialization successful. A new - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL has been - created as the child of HostBridgeHandle. A - device path consisting of an ACPI device path - node, with UID = RootBusNumber, has been - installed on the same new handle. - - @retval EFI_OUT_OF_RESOURCES Memory allocation failed. - - @return Error codes from - gBS->InstallMultipleProtocolInterfaces(). -**/ -STATIC -EFI_STATUS -InitRootBridge ( - IN UINT8 RootBusNumber, - IN UINT8 MaxSubBusNumber, - IN EFI_HANDLE HostBridgeHandle, - OUT PCI_ROOT_BRIDGE_INSTANCE **RootBus - ) -{ - PCI_ROOT_BRIDGE_INSTANCE *PrivateData; - PCI_ROOT_BRIDGE_RESOURCE_APERTURE ResAperture; - EFI_STATUS Status; - - ASSERT (RootBusNumber <= MaxSubBusNumber); - - PrivateData = AllocateZeroPool (sizeof *PrivateData); - if (PrivateData == NULL) { - return EFI_OUT_OF_RESOURCES; - } - - PrivateData->Signature = PCI_ROOT_BRIDGE_SIGNATURE; - - CopyMem (&PrivateData->DevicePath, &mRootBridgeDevicePathTemplate, - sizeof mRootBridgeDevicePathTemplate); - PrivateData->DevicePath.AcpiDevicePath.UID = RootBusNumber; - - ResAperture.BusBase = RootBusNumber; - ResAperture.BusLimit = MaxSubBusNumber; - ResAperture.MemBase = BASE_2GB; - ResAperture.MemLimit = BASE_4GB - 1; - ResAperture.IoBase = 0; - ResAperture.IoLimit = MAX_UINT16; - // - // The function call below allocates no resources and performs no actions - // that have to be rolled back on later failure. It always succeeds. - // - Status = RootBridgeConstructor (&PrivateData->Io, HostBridgeHandle, - EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM, &ResAperture); - ASSERT_EFI_ERROR (Status); - - Status = gBS->InstallMultipleProtocolInterfaces (&PrivateData->Handle, - &gEfiDevicePathProtocolGuid, &PrivateData->DevicePath, - &gEfiPciRootBridgeIoProtocolGuid, &PrivateData->Io, - NULL); - if (EFI_ERROR (Status)) { - goto FreePrivateData; - } - - DEBUG ((EFI_D_INFO, - "%a: installed root bus %d, with room for %d subordinate bus(es)\n", - __FUNCTION__, RootBusNumber, MaxSubBusNumber - RootBusNumber)); - *RootBus = PrivateData; - return EFI_SUCCESS; - -FreePrivateData: - FreePool (PrivateData); - return Status; -} - - -/** - Uninitialize and free a root bridge set up with InitRootBridge(). - - On return, the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL instance and the device path - will have been released, freeing RootBus->Handle as well. - - param[in] RootBus The private PCI_ROOT_BRIDGE_INSTANCE that has been created - with InitRootBridge(), and should be released. -**/ -STATIC -VOID -UninitRootBridge ( - IN PCI_ROOT_BRIDGE_INSTANCE *RootBus - ) -{ - EFI_STATUS Status; - - Status = gBS->UninstallMultipleProtocolInterfaces (RootBus->Handle, - &gEfiDevicePathProtocolGuid, &RootBus->DevicePath, - &gEfiPciRootBridgeIoProtocolGuid, &RootBus->Io, - NULL); - ASSERT_EFI_ERROR (Status); - FreePool (RootBus); -} - - -/** - Entry point of this driver - - @param ImageHandle Handle of driver image - @param SystemTable Point to EFI_SYSTEM_TABLE - - @retval EFI_OUT_OF_RESOURCES Can not allocate memory resource - @retval EFI_DEVICE_ERROR Can not install the protocol instance - @retval EFI_SUCCESS Success to initialize the Pci host bridge. -**/ -EFI_STATUS -EFIAPI -InitializePciHostBridge ( - IN EFI_HANDLE ImageHandle, - IN EFI_SYSTEM_TABLE *SystemTable - ) -{ - EFI_STATUS Status; - FIRMWARE_CONFIG_ITEM FwCfgItem; - UINTN FwCfgSize; - UINT64 ExtraRootBridgesLeft; - UINTN LastRootBridgeNumber; - UINTN RootBridgeNumber; - PCI_HOST_BRIDGE_INSTANCE *HostBridge; - PCI_ROOT_BRIDGE_INSTANCE *RootBus; - EFI_STATUS UninstallStatus; - - mDriverImageHandle = ImageHandle; - - // - // Create Host Bridge Device Handle - // - HostBridge = AllocateCopyPool (sizeof(PCI_HOST_BRIDGE_INSTANCE), - &mPciHostBridgeInstanceTemplate); - if (HostBridge == NULL) { - return EFI_OUT_OF_RESOURCES; - } - - InitializeListHead (&HostBridge->Head); - - Status = gBS->InstallMultipleProtocolInterfaces ( - &HostBridge->HostBridgeHandle, - &gEfiPciHostBridgeResourceAllocationProtocolGuid, - &HostBridge->ResAlloc, - NULL - ); - if (EFI_ERROR (Status)) { - goto FreeHostBridge; - } - - // - // QEMU provides the number of extra root buses, shortening the exhaustive - // search below. If there is no hint, the feature is missing. - // - Status = QemuFwCfgFindFile ("etc/extra-pci-roots", &FwCfgItem, &FwCfgSize); - if (EFI_ERROR (Status) || FwCfgSize != sizeof ExtraRootBridgesLeft) { - ExtraRootBridgesLeft = 0; - } else { - QemuFwCfgSelectItem (FwCfgItem); - QemuFwCfgReadBytes (FwCfgSize, &ExtraRootBridgesLeft); - DEBUG ((EFI_D_INFO, "%a: %Lu extra root buses reported by QEMU\n", - __FUNCTION__, ExtraRootBridgesLeft)); - } - - // - // The "main" root bus is always there. - // - LastRootBridgeNumber = 0; - - // - // Scan all other root buses. If function 0 of any device on a bus returns a - // VendorId register value different from all-bits-one, then that bus is - // alive. - // - for (RootBridgeNumber = 1; - RootBridgeNumber < 256 && ExtraRootBridgesLeft > 0; - ++RootBridgeNumber) { - UINTN Device; - - for (Device = 0; Device <= MAX_PCI_DEVICE_NUMBER; ++Device) { - if (PciRead16 (PCI_LIB_ADDRESS (RootBridgeNumber, Device, 0, - PCI_VENDOR_ID_OFFSET)) != MAX_UINT16) { - break; - } - } - if (Device <= MAX_PCI_DEVICE_NUMBER) { - // - // Found the next root bus. We can now install the *previous* one, - // because now we know how big a bus number range *that* one has, for any - // subordinate buses that might exist behind PCI bridges hanging off it. - // - Status = InitRootBridge ((UINT8)LastRootBridgeNumber, - (UINT8)(RootBridgeNumber - 1), HostBridge->HostBridgeHandle, - &RootBus); - if (EFI_ERROR (Status)) { - goto RollbackProtocols; - } - InsertTailList (&HostBridge->Head, &RootBus->Link); - LastRootBridgeNumber = RootBridgeNumber; - --ExtraRootBridgesLeft; - } - } - - // - // Install the last root bus (which might be the only, ie. main, root bus, if - // we've found no extra root buses). - // - Status = InitRootBridge ((UINT8)LastRootBridgeNumber, 255, - HostBridge->HostBridgeHandle, &RootBus); - if (EFI_ERROR (Status)) { - goto RollbackProtocols; - } - InsertTailList (&HostBridge->Head, &RootBus->Link); - - return EFI_SUCCESS; - -RollbackProtocols: - while (!IsListEmpty (&HostBridge->Head)) { - LIST_ENTRY *Entry; - - Entry = GetFirstNode (&HostBridge->Head); - RemoveEntryList (Entry); - RootBus = DRIVER_INSTANCE_FROM_LIST_ENTRY (Entry); - UninitRootBridge (RootBus); - } - UninstallStatus = gBS->UninstallMultipleProtocolInterfaces ( - HostBridge->HostBridgeHandle, - &gEfiPciHostBridgeResourceAllocationProtocolGuid, - &HostBridge->ResAlloc, - NULL - ); - ASSERT_EFI_ERROR (UninstallStatus); - -FreeHostBridge: - FreePool (HostBridge); - - return Status; -} - - -/** - These are the notifications from the PCI bus driver that it is about to enter - a certain phase of the PCI enumeration process. - - This member function can be used to notify the host bridge driver to perform - specific actions, including any chipset-specific initialization, so that the - chipset is ready to enter the next phase. Eight notification points are - defined at this time. See belows: - - EfiPciHostBridgeBeginEnumeration Resets the host bridge PCI apertures - and internal data structures. The PCI - enumerator should issue this - notification before starting a fresh - enumeration process. Enumeration - cannot be restarted after sending any - other notification such as - EfiPciHostBridgeBeginBusAllocation. - - EfiPciHostBridgeBeginBusAllocation The bus allocation phase is about to - begin. No specific action is required - here. This notification can be used to - perform any chipset-specific - programming. - - EfiPciHostBridgeEndBusAllocation The bus allocation and bus programming - phase is complete. No specific action - is required here. This notification - can be used to perform any - chipset-specific programming. - - EfiPciHostBridgeBeginResourceAllocation - The resource allocation phase is about - to begin. No specific action is - required here. This notification can - be used to perform any - chipset-specific programming. - - EfiPciHostBridgeAllocateResources Allocates resources per previously - submitted requests for all the PCI - root bridges. These resource settings - are returned on the next call to - GetProposedResources(). Before calling - NotifyPhase() with a Phase of - EfiPciHostBridgeAllocateResource, the - PCI bus enumerator is responsible for - gathering I/O and memory requests for - all the PCI root bridges and - submitting these requests using - SubmitResources(). This function pads - the resource amount to suit the root - bridge hardware, takes care of - dependencies between the PCI root - bridges, and calls the Global - Coherency Domain (GCD) with the - allocation request. In the case of - padding, the allocated range could be - bigger than what was requested. - - EfiPciHostBridgeSetResources Programs the host bridge hardware to - decode previously allocated resources - (proposed resources) for all the PCI - root bridges. After the hardware is - programmed, reassigning resources will - not be supported. The bus settings are - not affected. - - EfiPciHostBridgeFreeResources Deallocates resources that were - previously allocated for all the PCI - root bridges and resets the I/O and - memory apertures to their initial - state. The bus settings are not - affected. If the request to allocate - resources fails, the PCI enumerator - can use this notification to - deallocate previous resources, adjust - the requests, and retry allocation. - - EfiPciHostBridgeEndResourceAllocation The resource allocation phase is - completed. No specific action is - required here. This notification can - be used to perform any chipsetspecific - programming. - - @param[in] This The instance pointer of - EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - - @param[in] Phase The phase during enumeration - - @retval EFI_NOT_READY This phase cannot be entered at this time. For - example, this error is valid for a Phase of - EfiPciHostBridgeAllocateResources if - SubmitResources() has not been called for one - or more PCI root bridges before this call - - @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. - This error is valid for a Phase of - EfiPciHostBridgeSetResources. - - @retval EFI_INVALID_PARAMETER Invalid phase parameter - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. This error is valid for a - Phase of EfiPciHostBridgeAllocateResources if - the previously submitted resource requests - cannot be fulfilled or were only partially - fulfilled. - - @retval EFI_SUCCESS The notification was accepted without any - errors. -**/ -EFI_STATUS -EFIAPI -NotifyPhase( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE Phase - ) -{ - PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - PCI_RESOURCE_TYPE Index; - LIST_ENTRY *List; - EFI_PHYSICAL_ADDRESS BaseAddress; - UINT64 AddrLen; - UINTN BitsOfAlignment; - EFI_STATUS Status; - EFI_STATUS ReturnStatus; - - HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This); - - switch (Phase) { - - case EfiPciHostBridgeBeginEnumeration: - if (HostBridgeInstance->CanRestarted) { - // - // Reset the Each Root Bridge - // - List = HostBridgeInstance->Head.ForwardLink; - - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - for (Index = TypeIo; Index < TypeMax; Index++) { - RootBridgeInstance->ResAllocNode[Index].Type = Index; - RootBridgeInstance->ResAllocNode[Index].Base = 0; - RootBridgeInstance->ResAllocNode[Index].Length = 0; - RootBridgeInstance->ResAllocNode[Index].Status = ResNone; - } - - List = List->ForwardLink; - } - - HostBridgeInstance->ResourceSubmited = FALSE; - HostBridgeInstance->CanRestarted = TRUE; - } else { - // - // Can not restart - // - return EFI_NOT_READY; - } - break; - - case EfiPciHostBridgeEndEnumeration: - break; - - case EfiPciHostBridgeBeginBusAllocation: - // - // No specific action is required here, can perform any chipset specific - // programing - // - HostBridgeInstance->CanRestarted = FALSE; - break; - - case EfiPciHostBridgeEndBusAllocation: - // - // No specific action is required here, can perform any chipset specific - // programing - // - //HostBridgeInstance->CanRestarted = FALSE; - break; - - case EfiPciHostBridgeBeginResourceAllocation: - // - // No specific action is required here, can perform any chipset specific - // programing - // - //HostBridgeInstance->CanRestarted = FALSE; - break; - - case EfiPciHostBridgeAllocateResources: - ReturnStatus = EFI_SUCCESS; - if (HostBridgeInstance->ResourceSubmited) { - // - // Take care of the resource dependencies between the root bridges - // - List = HostBridgeInstance->Head.ForwardLink; - - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - for (Index = TypeIo; Index < TypeBus; Index++) { - if (RootBridgeInstance->ResAllocNode[Index].Status != ResNone) { - - AddrLen = RootBridgeInstance->ResAllocNode[Index].Length; - - // - // Get the number of '1' in Alignment. - // - BitsOfAlignment = - (UINTN)(HighBitSet64 ( - RootBridgeInstance->ResAllocNode[Index].Alignment - ) + 1); - - switch (Index) { - - case TypeIo: - // - // It is impossible for this chipset to align 0xFFFF for IO16 - // So clear it - // - if (BitsOfAlignment >= 16) { - BitsOfAlignment = 0; - } - - Status = gDS->AllocateIoSpace ( - EfiGcdAllocateAnySearchBottomUp, - EfiGcdIoTypeIo, - BitsOfAlignment, - AddrLen, - &BaseAddress, - mDriverImageHandle, - NULL - ); - - if (!EFI_ERROR (Status)) { - RootBridgeInstance->ResAllocNode[Index].Base = - (UINTN)BaseAddress; - RootBridgeInstance->ResAllocNode[Index].Status = - ResAllocated; - } else { - ReturnStatus = Status; - if (Status != EFI_OUT_OF_RESOURCES) { - RootBridgeInstance->ResAllocNode[Index].Length = 0; - } - } - - break; - - - case TypeMem32: - // - // It is impossible for this chipset to align 0xFFFFFFFF for - // Mem32 - // So clear it - // - - if (BitsOfAlignment >= 32) { - BitsOfAlignment = 0; - } - - Status = gDS->AllocateMemorySpace ( - EfiGcdAllocateAnySearchBottomUp, - EfiGcdMemoryTypeMemoryMappedIo, - BitsOfAlignment, - AddrLen, - &BaseAddress, - mDriverImageHandle, - NULL - ); - - if (!EFI_ERROR (Status)) { - // We were able to allocate the PCI memory - RootBridgeInstance->ResAllocNode[Index].Base = - (UINTN)BaseAddress; - RootBridgeInstance->ResAllocNode[Index].Status = - ResAllocated; - - } else { - // Not able to allocate enough PCI memory - ReturnStatus = Status; - - if (Status != EFI_OUT_OF_RESOURCES) { - RootBridgeInstance->ResAllocNode[Index].Length = 0; - } - ASSERT (FALSE); - } - break; - - case TypePMem32: - case TypeMem64: - case TypePMem64: - ReturnStatus = EFI_ABORTED; - break; - default: - ASSERT (FALSE); - break; - }; //end switch - } - } - - List = List->ForwardLink; - } - - return ReturnStatus; - - } else { - return EFI_NOT_READY; - } - break; - - case EfiPciHostBridgeSetResources: - break; - - case EfiPciHostBridgeFreeResources: - ReturnStatus = EFI_SUCCESS; - List = HostBridgeInstance->Head.ForwardLink; - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - for (Index = TypeIo; Index < TypeBus; Index++) { - if (RootBridgeInstance->ResAllocNode[Index].Status == ResAllocated) { - AddrLen = RootBridgeInstance->ResAllocNode[Index].Length; - BaseAddress = RootBridgeInstance->ResAllocNode[Index].Base; - switch (Index) { - - case TypeIo: - Status = gDS->FreeIoSpace (BaseAddress, AddrLen); - if (EFI_ERROR (Status)) { - ReturnStatus = Status; - } - break; - - case TypeMem32: - Status = gDS->FreeMemorySpace (BaseAddress, AddrLen); - if (EFI_ERROR (Status)) { - ReturnStatus = Status; - } - break; - - case TypePMem32: - break; - - case TypeMem64: - break; - - case TypePMem64: - break; - - default: - ASSERT (FALSE); - break; - - }; //end switch - RootBridgeInstance->ResAllocNode[Index].Type = Index; - RootBridgeInstance->ResAllocNode[Index].Base = 0; - RootBridgeInstance->ResAllocNode[Index].Length = 0; - RootBridgeInstance->ResAllocNode[Index].Status = ResNone; - } - } - - List = List->ForwardLink; - } - - HostBridgeInstance->ResourceSubmited = FALSE; - HostBridgeInstance->CanRestarted = TRUE; - return ReturnStatus; - - case EfiPciHostBridgeEndResourceAllocation: - HostBridgeInstance->CanRestarted = FALSE; - break; - - default: - return EFI_INVALID_PARAMETER; - } - - return EFI_SUCCESS; -} - -/** - Return the device handle of the next PCI root bridge that is associated with - this Host Bridge. - - This function is called multiple times to retrieve the device handles of all - the PCI root bridges that are associated with this PCI host bridge. Each PCI - host bridge is associated with one or more PCI root bridges. On each call, - the handle that was returned by the previous call is passed into the - interface, and on output the interface returns the device handle of the next - PCI root bridge. The caller can use the handle to obtain the instance of the - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL for that root bridge. When there are no more - PCI root bridges to report, the interface returns EFI_NOT_FOUND. A PCI - enumerator must enumerate the PCI root bridges in the order that they are - returned by this function. - - For D945 implementation, there is only one root bridge in PCI host bridge. - - @param[in] This The instance pointer of - EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - - @param[in, out] RootBridgeHandle Returns the device handle of the next PCI - root bridge. - - @retval EFI_SUCCESS If parameter RootBridgeHandle = NULL, then - return the first Rootbridge handle of the - specific Host bridge and return EFI_SUCCESS. - - @retval EFI_NOT_FOUND Can not find the any more root bridge in - specific host bridge. - - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not an EFI_HANDLE that was - returned on a previous call to - GetNextRootBridge(). -**/ -EFI_STATUS -EFIAPI -GetNextRootBridge( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN OUT EFI_HANDLE *RootBridgeHandle - ) -{ - BOOLEAN NoRootBridge; - LIST_ENTRY *List; - PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - - NoRootBridge = TRUE; - HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This); - List = HostBridgeInstance->Head.ForwardLink; - - - while (List != &HostBridgeInstance->Head) { - NoRootBridge = FALSE; - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - if (*RootBridgeHandle == NULL) { - // - // Return the first Root Bridge Handle of the Host Bridge - // - *RootBridgeHandle = RootBridgeInstance->Handle; - return EFI_SUCCESS; - } else { - if (*RootBridgeHandle == RootBridgeInstance->Handle) { - // - // Get next if have - // - List = List->ForwardLink; - if (List!=&HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - *RootBridgeHandle = RootBridgeInstance->Handle; - return EFI_SUCCESS; - } else { - return EFI_NOT_FOUND; - } - } - } - - List = List->ForwardLink; - } //end while - - if (NoRootBridge) { - return EFI_NOT_FOUND; - } else { - return EFI_INVALID_PARAMETER; - } -} - -/** - Returns the allocation attributes of a PCI root bridge. - - The function returns the allocation attributes of a specific PCI root bridge. - The attributes can vary from one PCI root bridge to another. These attributes - are different from the decode-related attributes that are returned by the - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.GetAttributes() member function. The - RootBridgeHandle parameter is used to specify the instance of the PCI root - bridge. The device handles of all the root bridges that are associated with - this host bridge must be obtained by calling GetNextRootBridge(). The - attributes are static in the sense that they do not change during or after - the enumeration process. The hardware may provide mechanisms to change the - attributes on the fly, but such changes must be completed before - EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL is installed. The permitted - values of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ATTRIBUTES are defined in - "Related Definitions" below. The caller uses these attributes to combine - multiple resource requests. - - For example, if the flag EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM is set, the PCI - bus enumerator needs to include requests for the prefetchable memory in the - nonprefetchable memory pool and not request any prefetchable memory. - - Attribute Description - ------------------------------------ --------------------------------------- - EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM If this bit is set, then the PCI root - bridge does not support separate - windows for nonprefetchable and - prefetchable memory. A PCI bus driver - needs to include requests for - prefetchable memory in the - nonprefetchable memory pool. - - EFI_PCI_HOST_BRIDGE_MEM64_DECODE If this bit is set, then the PCI root - bridge supports 64-bit memory windows. - If this bit is not set, the PCI bus - driver needs to include requests for a - 64-bit memory address in the - corresponding 32-bit memory pool. - - @param[in] This The instance pointer of - EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - - @param[in] RootBridgeHandle The device handle of the PCI root bridge in - which the caller is interested. Type - EFI_HANDLE is defined in - InstallProtocolInterface() in the UEFI 2.0 - Specification. - - @param[out] Attributes The pointer to attribte of root bridge, it is - output parameter - - @retval EFI_INVALID_PARAMETER Attribute pointer is NULL - - @retval EFI_INVALID_PARAMETER RootBridgehandle is invalid. - - @retval EFI_SUCCESS Success to get attribute of interested root - bridge. -**/ -EFI_STATUS -EFIAPI -GetAttributes( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - OUT UINT64 *Attributes - ) -{ - LIST_ENTRY *List; - PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - - if (Attributes == NULL) { - return EFI_INVALID_PARAMETER; - } - - HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This); - List = HostBridgeInstance->Head.ForwardLink; - - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - if (RootBridgeHandle == RootBridgeInstance->Handle) { - *Attributes = RootBridgeInstance->RootBridgeAttrib; - return EFI_SUCCESS; - } - List = List->ForwardLink; - } - - // - // RootBridgeHandle is not an EFI_HANDLE - // that was returned on a previous call to GetNextRootBridge() - // - return EFI_INVALID_PARAMETER; -} - -/** - Sets up the specified PCI root bridge for the bus enumeration process. - - This member function sets up the root bridge for bus enumeration and returns - the PCI bus range over which the search should be performed in ACPI 2.0 - resource descriptor format. - - @param[in] This The - EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - instance. - - @param[in] RootBridgeHandle The PCI Root Bridge to be set up. - - @param[out] Configuration Pointer to the pointer to the PCI bus resource - descriptor. - - @retval EFI_INVALID_PARAMETER Invalid Root bridge's handle - - @retval EFI_OUT_OF_RESOURCES Fail to allocate ACPI resource descriptor tag. - - @retval EFI_SUCCESS Sucess to allocate ACPI resource descriptor. -**/ -EFI_STATUS -EFIAPI -StartBusEnumeration( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - OUT VOID **Configuration - ) -{ - LIST_ENTRY *List; - PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - VOID *Buffer; - UINT8 *Temp; - UINT64 BusStart; - UINT64 BusEnd; - - HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This); - List = HostBridgeInstance->Head.ForwardLink; - - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - if (RootBridgeHandle == RootBridgeInstance->Handle) { - // - // Set up the Root Bridge for Bus Enumeration - // - BusStart = RootBridgeInstance->BusBase; - BusEnd = RootBridgeInstance->BusLimit; - // - // Program the Hardware(if needed) if error return EFI_DEVICE_ERROR - // - - Buffer = AllocatePool ( - sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) + - sizeof(EFI_ACPI_END_TAG_DESCRIPTOR) - ); - if (Buffer == NULL) { - return EFI_OUT_OF_RESOURCES; - } - - Temp = (UINT8 *)Buffer; - - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->Desc = 0x8A; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->Len = 0x2B; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->ResType = 2; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->GenFlag = 0; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->SpecificFlag = 0; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrSpaceGranularity = 0; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrRangeMin = BusStart; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrRangeMax = 0; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrTranslationOffset = 0; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrLen = - BusEnd - BusStart + 1; - - Temp = Temp + sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR); - ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Desc = 0x79; - ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Checksum = 0x0; - - *Configuration = Buffer; - return EFI_SUCCESS; - } - List = List->ForwardLink; - } - - return EFI_INVALID_PARAMETER; -} - -/** - Programs the PCI root bridge hardware so that it decodes the specified PCI - bus range. - - This member function programs the specified PCI root bridge to decode the bus - range that is specified by the input parameter Configuration. - The bus range information is specified in terms of the ACPI 2.0 resource - descriptor format. - - @param[in] This The - EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - instance - - @param[in] RootBridgeHandle The PCI Root Bridge whose bus range is to be - programmed - - @param[in] Configuration The pointer to the PCI bus resource descriptor - - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge - handle. - - @retval EFI_INVALID_PARAMETER Configuration is NULL. - - @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI - 2.0 resource descriptor. - - @retval EFI_INVALID_PARAMETER Configuration does not include a valid ACPI - 2.0 bus resource descriptor. - - @retval EFI_INVALID_PARAMETER Configuration includes valid ACPI 2.0 resource - descriptors other than bus descriptors. - - @retval EFI_INVALID_PARAMETER Configuration contains one or more invalid - ACPI resource descriptors. - - @retval EFI_INVALID_PARAMETER "Address Range Minimum" is invalid for this - root bridge. - - @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this - root bridge. - - @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. - - @retval EFI_SUCCESS The bus range for the PCI root bridge was - programmed. -**/ -EFI_STATUS -EFIAPI -SetBusNumbers( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - IN VOID *Configuration - ) -{ - LIST_ENTRY *List; - PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - UINT8 *Ptr; - UINTN BusStart; - UINTN BusEnd; - UINTN BusLen; - - if (Configuration == NULL) { - return EFI_INVALID_PARAMETER; - } - - Ptr = Configuration; - - // - // Check the Configuration is valid - // - if(*Ptr != ACPI_ADDRESS_SPACE_DESCRIPTOR) { - return EFI_INVALID_PARAMETER; - } - - if (((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Ptr)->ResType != 2) { - return EFI_INVALID_PARAMETER; - } - - Ptr += sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR); - if (*Ptr != ACPI_END_TAG_DESCRIPTOR) { - return EFI_INVALID_PARAMETER; - } - - HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This); - List = HostBridgeInstance->Head.ForwardLink; - - Ptr = Configuration; - - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - if (RootBridgeHandle == RootBridgeInstance->Handle) { - EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Desc; - - Desc = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Ptr; - BusStart = (UINTN)Desc->AddrRangeMin; - BusLen = (UINTN)Desc->AddrLen; - BusEnd = BusStart + BusLen - 1; - - if (BusStart > BusEnd) { - return EFI_INVALID_PARAMETER; - } - - if ((BusStart < RootBridgeInstance->BusBase) || - (BusEnd > RootBridgeInstance->BusLimit)) { - return EFI_INVALID_PARAMETER; - } - - // - // Update the Bus Range - // - RootBridgeInstance->ResAllocNode[TypeBus].Base = BusStart; - RootBridgeInstance->ResAllocNode[TypeBus].Length = BusLen; - RootBridgeInstance->ResAllocNode[TypeBus].Status = ResAllocated; - - // - // Program the Root Bridge Hardware - // - - return EFI_SUCCESS; - } - - List = List->ForwardLink; - } - - return EFI_INVALID_PARAMETER; -} - - -/** - Submits the I/O and memory resource requirements for the specified PCI root - bridge. - - This function is used to submit all the I/O and memory resources that are - required by the specified PCI root bridge. The input parameter Configuration - is used to specify the following: - - The various types of resources that are required - - The associated lengths in terms of ACPI 2.0 resource descriptor format - - @param[in] This Pointer to the - EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - instance. - - @param[in] RootBridgeHandle The PCI root bridge whose I/O and memory - resource requirements are being submitted. - - @param[in] Configuration The pointer to the PCI I/O and PCI memory - resource descriptor. - - @retval EFI_SUCCESS The I/O and memory resource requests for a PCI - root bridge were accepted. - - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge - handle. - - @retval EFI_INVALID_PARAMETER Configuration is NULL. - - @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI - 2.0 resource descriptor. - - @retval EFI_INVALID_PARAMETER Configuration includes requests for one or - more resource types that are not supported by - this PCI root bridge. This error will happen - if the caller did not combine resources - according to Attributes that were returned by - GetAllocAttributes(). - - @retval EFI_INVALID_PARAMETER Address Range Maximum" is invalid. - - @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this PCI - root bridge. - - @retval EFI_INVALID_PARAMETER "Address Space Granularity" is invalid for - this PCI root bridge. -**/ -EFI_STATUS -EFIAPI -SubmitResources( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - IN VOID *Configuration - ) -{ - LIST_ENTRY *List; - PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - UINT8 *Temp; - EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Ptr; - UINT64 AddrLen; - UINT64 Alignment; - - // - // Check the input parameter: Configuration - // - if (Configuration == NULL) { - return EFI_INVALID_PARAMETER; - } - - HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This); - List = HostBridgeInstance->Head.ForwardLink; - - Temp = (UINT8 *)Configuration; - while ( *Temp == 0x8A) { - Temp += sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) ; - } - if (*Temp != 0x79) { - return EFI_INVALID_PARAMETER; - } - - Temp = (UINT8 *)Configuration; - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - if (RootBridgeHandle == RootBridgeInstance->Handle) { - while ( *Temp == 0x8A) { - Ptr = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) Temp ; - - // - // Check Address Length - // - if (Ptr->AddrLen > 0xffffffff) { - return EFI_INVALID_PARAMETER; - } - - // - // Check address range alignment - // - if (Ptr->AddrRangeMax >= 0xffffffff || - Ptr->AddrRangeMax != (GetPowerOfTwo64 ( - Ptr->AddrRangeMax + 1) - 1)) { - return EFI_INVALID_PARAMETER; - } - - switch (Ptr->ResType) { - - case 0: - - // - // Check invalid Address Sapce Granularity - // - if (Ptr->AddrSpaceGranularity != 32) { - return EFI_INVALID_PARAMETER; - } - - // - // check the memory resource request is supported by PCI root bridge - // - if (RootBridgeInstance->RootBridgeAttrib == - EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM && - Ptr->SpecificFlag == 0x06) { - return EFI_INVALID_PARAMETER; - } - - AddrLen = Ptr->AddrLen; - Alignment = Ptr->AddrRangeMax; - if (Ptr->AddrSpaceGranularity == 32) { - if (Ptr->SpecificFlag == 0x06) { - // - // Apply from GCD - // - RootBridgeInstance->ResAllocNode[TypePMem32].Status = - ResSubmitted; - } else { - RootBridgeInstance->ResAllocNode[TypeMem32].Length = AddrLen; - RootBridgeInstance->ResAllocNode[TypeMem32].Alignment = - Alignment; - RootBridgeInstance->ResAllocNode[TypeMem32].Status = - ResRequested; - HostBridgeInstance->ResourceSubmited = TRUE; - } - } - - if (Ptr->AddrSpaceGranularity == 64) { - if (Ptr->SpecificFlag == 0x06) { - RootBridgeInstance->ResAllocNode[TypePMem64].Status = - ResSubmitted; - } else { - RootBridgeInstance->ResAllocNode[TypeMem64].Status = - ResSubmitted; - } - } - break; - - case 1: - AddrLen = (UINTN) Ptr->AddrLen; - Alignment = (UINTN) Ptr->AddrRangeMax; - RootBridgeInstance->ResAllocNode[TypeIo].Length = AddrLen; - RootBridgeInstance->ResAllocNode[TypeIo].Alignment = Alignment; - RootBridgeInstance->ResAllocNode[TypeIo].Status = ResRequested; - HostBridgeInstance->ResourceSubmited = TRUE; - break; - - default: - break; - }; - - Temp += sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) ; - } - - return EFI_SUCCESS; - } - - List = List->ForwardLink; - } - - return EFI_INVALID_PARAMETER; -} - -/** - Returns the proposed resource settings for the specified PCI root bridge. - - This member function returns the proposed resource settings for the - specified PCI root bridge. The proposed resource settings are prepared when - NotifyPhase() is called with a Phase of EfiPciHostBridgeAllocateResources. - The output parameter Configuration specifies the following: - - The various types of resources, excluding bus resources, that are - allocated - - The associated lengths in terms of ACPI 2.0 resource descriptor format - - @param[in] This Pointer to the - EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - instance. - - @param[in] RootBridgeHandle The PCI root bridge handle. Type EFI_HANDLE is - defined in InstallProtocolInterface() in the - UEFI 2.0 Specification. - - @param[out] Configuration The pointer to the pointer to the PCI I/O and - memory resource descriptor. - - @retval EFI_SUCCESS The requested parameters were returned. - - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge - handle. - - @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. -**/ -EFI_STATUS -EFIAPI -GetProposedResources( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - OUT VOID **Configuration - ) -{ - LIST_ENTRY *List; - PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - UINTN Index; - UINTN Number; - VOID *Buffer; - UINT8 *Temp; - EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Ptr; - UINT64 ResStatus; - - Buffer = NULL; - Number = 0; - // - // Get the Host Bridge Instance from the resource allocation protocol - // - HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This); - List = HostBridgeInstance->Head.ForwardLink; - - // - // Enumerate the root bridges in this host bridge - // - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - if (RootBridgeHandle == RootBridgeInstance->Handle) { - for (Index = 0; Index < TypeBus; Index ++) { - if (RootBridgeInstance->ResAllocNode[Index].Status != ResNone) { - Number ++; - } - } - - if (Number == 0) { - return EFI_INVALID_PARAMETER; - } - - Buffer = AllocateZeroPool ( - Number * sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) + - sizeof(EFI_ACPI_END_TAG_DESCRIPTOR) - ); - if (Buffer == NULL) { - return EFI_OUT_OF_RESOURCES; - } - - Temp = Buffer; - for (Index = 0; Index < TypeBus; Index ++) { - if (RootBridgeInstance->ResAllocNode[Index].Status != ResNone) { - Ptr = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) Temp ; - ResStatus = RootBridgeInstance->ResAllocNode[Index].Status; - - switch (Index) { - - case TypeIo: - // - // Io - // - Ptr->Desc = 0x8A; - Ptr->Len = 0x2B; - Ptr->ResType = 1; - Ptr->GenFlag = 0; - Ptr->SpecificFlag = 0; - Ptr->AddrRangeMin = RootBridgeInstance->ResAllocNode[Index].Base; - Ptr->AddrRangeMax = 0; - Ptr->AddrTranslationOffset = (ResStatus == ResAllocated) ? - EFI_RESOURCE_SATISFIED : - EFI_RESOURCE_LESS; - Ptr->AddrLen = RootBridgeInstance->ResAllocNode[Index].Length; - break; - - case TypeMem32: - // - // Memory 32 - // - Ptr->Desc = 0x8A; - Ptr->Len = 0x2B; - Ptr->ResType = 0; - Ptr->GenFlag = 0; - Ptr->SpecificFlag = 0; - Ptr->AddrSpaceGranularity = 32; - Ptr->AddrRangeMin = RootBridgeInstance->ResAllocNode[Index].Base; - Ptr->AddrRangeMax = 0; - Ptr->AddrTranslationOffset = (ResStatus == ResAllocated) ? - EFI_RESOURCE_SATISFIED : - EFI_RESOURCE_LESS; - Ptr->AddrLen = RootBridgeInstance->ResAllocNode[Index].Length; - break; - - case TypePMem32: - // - // Prefetch memory 32 - // - Ptr->Desc = 0x8A; - Ptr->Len = 0x2B; - Ptr->ResType = 0; - Ptr->GenFlag = 0; - Ptr->SpecificFlag = 6; - Ptr->AddrSpaceGranularity = 32; - Ptr->AddrRangeMin = 0; - Ptr->AddrRangeMax = 0; - Ptr->AddrTranslationOffset = EFI_RESOURCE_NONEXISTENT; - Ptr->AddrLen = 0; - break; - - case TypeMem64: - // - // Memory 64 - // - Ptr->Desc = 0x8A; - Ptr->Len = 0x2B; - Ptr->ResType = 0; - Ptr->GenFlag = 0; - Ptr->SpecificFlag = 0; - Ptr->AddrSpaceGranularity = 64; - Ptr->AddrRangeMin = 0; - Ptr->AddrRangeMax = 0; - Ptr->AddrTranslationOffset = EFI_RESOURCE_NONEXISTENT; - Ptr->AddrLen = 0; - break; - - case TypePMem64: - // - // Prefetch memory 64 - // - Ptr->Desc = 0x8A; - Ptr->Len = 0x2B; - Ptr->ResType = 0; - Ptr->GenFlag = 0; - Ptr->SpecificFlag = 6; - Ptr->AddrSpaceGranularity = 64; - Ptr->AddrRangeMin = 0; - Ptr->AddrRangeMax = 0; - Ptr->AddrTranslationOffset = EFI_RESOURCE_NONEXISTENT; - Ptr->AddrLen = 0; - break; - }; - - Temp += sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR); - } - } - - ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Desc = 0x79; - ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Checksum = 0x0; - - *Configuration = Buffer; - - return EFI_SUCCESS; - } - - List = List->ForwardLink; - } - - return EFI_INVALID_PARAMETER; -} - -/** - Provides the hooks from the PCI bus driver to every PCI controller - (device/function) at various stages of the PCI enumeration process that allow - the host bridge driver to preinitialize individual PCI controllers before - enumeration. - - This function is called during the PCI enumeration process. No specific - action is expected from this member function. It allows the host bridge - driver to preinitialize individual PCI controllers before enumeration. - - @param This Pointer to the - EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - instance. - - @param RootBridgeHandle The associated PCI root bridge handle. Type - EFI_HANDLE is defined in InstallProtocolInterface() - in the UEFI 2.0 Specification. - - @param PciAddress The address of the PCI device on the PCI bus. This - address can be passed to the - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL member functions to - access the PCI configuration space of the device. - See Table 12-1 in the UEFI 2.0 Specification for the - definition of - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS. - - @param Phase The phase of the PCI device enumeration. - - @retval EFI_SUCCESS The requested parameters were returned. - - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge - handle. - - @retval EFI_INVALID_PARAMETER Phase is not a valid phase that is defined - in - EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE. - - @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. - The PCI enumerator should not enumerate this - device, including its child devices if it is - a PCI-to-PCI bridge. -**/ -EFI_STATUS -EFIAPI -PreprocessController ( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS PciAddress, - IN EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE Phase - ) -{ - PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - LIST_ENTRY *List; - - HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This); - List = HostBridgeInstance->Head.ForwardLink; - - // - // Enumerate the root bridges in this host bridge - // - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - if (RootBridgeHandle == RootBridgeInstance->Handle) { - break; - } - List = List->ForwardLink; - } - if (List == &HostBridgeInstance->Head) { - return EFI_INVALID_PARAMETER; - } - - if ((UINT32)Phase > EfiPciBeforeResourceCollection) { - return EFI_INVALID_PARAMETER; - } - - return EFI_SUCCESS; -} diff --git a/OvmfPkg/PciHostBridgeDxe/PciRootBridgeIo.c b/OvmfPkg/PciHostBridgeDxe/PciRootBridgeIo.c deleted file mode 100644 index c61fd1d7db6b..000000000000 --- a/OvmfPkg/PciHostBridgeDxe/PciRootBridgeIo.c +++ /dev/null @@ -1,2628 +0,0 @@ -/** @file - PCI Root Bridge Io Protocol implementation - - Copyright (C) 2015, Red Hat, Inc. - Copyright (c) 2008 - 2012, Intel Corporation. All rights reserved.
- - This program and the accompanying materials are licensed and made available - under the terms and conditions of the BSD License which accompanies this - distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT - WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -**/ - -#include "PciHostBridge.h" -#include "IoFifo.h" - -STATIC -CONST -RESOURCE_CONFIGURATION mConfigurationTemplate = { - { - { 0x8A, 0x2B, 1, 0, 0, 0, 0, 0, 0, 0 }, // SpaceDesc[TypeIo] - { 0x8A, 0x2B, 0, 0, 0, 32, 0, 0, 0, 0 }, // SpaceDesc[TypeMem32] - { 0x8A, 0x2B, 0, 0, 6, 32, 0, 0, 0, 0 }, // SpaceDesc[TypePMem32] - { 0x8A, 0x2B, 0, 0, 0, 64, 0, 0, 0, 0 }, // SpaceDesc[TypeMem64] - { 0x8A, 0x2B, 0, 0, 6, 64, 0, 0, 0, 0 }, // SpaceDesc[TypePMem64] - { 0x8A, 0x2B, 2, 0, 0, 0, 0, 0, 0, 0 } // SpaceDesc[TypeBus] - }, - { 0x79, 0 } // EndDesc -}; - -// -// Protocol Member Function Prototypes -// - -/** - Polls an address in memory mapped I/O space until an exit condition is met, - or a timeout occurs. - - This function provides a standard way to poll a PCI memory location. A PCI - memory read operation is performed at the PCI memory address specified by - Address for the width specified by Width. The result of this PCI memory read - operation is stored in Result. This PCI memory read operation is repeated - until either a timeout of Delay 100 ns units has expired, or (Result & Mask) - is equal to Value. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] Width Signifies the width of the memory operations. - - @param[in] Address The base address of the memory operations. The caller - is responsible for aligning Address if required. - - @param[in] Mask Mask used for the polling criteria. Bytes above Width - in Mask are ignored. The bits in the bytes below Width - which are zero in Mask are ignored when polling the - memory address. - - @param[in] Value The comparison value used for the polling exit - criteria. - - @param[in] Delay The number of 100 ns units to poll. Note that timer - available may be of poorer granularity. - - @param[out] Result Pointer to the last value read from the memory - location. - - @retval EFI_SUCCESS The last data returned from the access matched - the poll exit criteria. - - @retval EFI_INVALID_PARAMETER Width is invalid. - - @retval EFI_INVALID_PARAMETER Result is NULL. - - @retval EFI_TIMEOUT Delay expired before a match occurred. - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoPollMem ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINT64 Mask, - IN UINT64 Value, - IN UINT64 Delay, - OUT UINT64 *Result - ); - -/** - Reads from the I/O space of a PCI Root Bridge. Returns when either the - polling exit criteria is satisfied or after a defined duration. - - This function provides a standard way to poll a PCI I/O location. A PCI I/O - read operation is performed at the PCI I/O address specified by Address for - the width specified by Width. The result of this PCI I/O read operation is - stored in Result. This PCI I/O read operation is repeated until either a - timeout of Delay 100 ns units has expired, or (Result & Mask) is equal to - Value. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] Width Signifies the width of the I/O operations. - - @param[in] Address The base address of the I/O operations. The caller is - responsible for aligning Address if required. - - @param[in] Mask Mask used for the polling criteria. Bytes above Width in - Mask are ignored. The bits in the bytes below Width - which are zero in Mask are ignored when polling the I/O - address. - - @param[in] Value The comparison value used for the polling exit criteria. - - - @param[in] Delay The number of 100 ns units to poll. Note that timer - available may be of poorer granularity. - - @param[out] Result Pointer to the last value read from the memory location. - - @retval EFI_SUCCESS The last data returned from the access matched - the poll exit criteria. - - @retval EFI_INVALID_PARAMETER Width is invalid. - - @retval EFI_INVALID_PARAMETER Result is NULL. - - @retval EFI_TIMEOUT Delay expired before a match occurred. - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoPollIo ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINT64 Mask, - IN UINT64 Value, - IN UINT64 Delay, - OUT UINT64 *Result - ); - -/** - Enables a PCI driver to access PCI controller registers in the PCI root - bridge memory space. - - The Mem.Read(), and Mem.Write() functions enable a driver to access PCI - controller registers in the PCI root bridge memory space. - The memory operations are carried out exactly as requested. The caller is - responsible for satisfying any alignment and memory width restrictions that a - PCI Root Bridge on a platform might require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] Width Signifies the width of the memory operation. - - @param[in] Address The base address of the memory operation. The caller - is responsible for aligning the Address if required. - - @param[in] Count The number of memory operations to perform. Bytes - moved is Width size * Count, starting at Address. - - @param[out] Buffer For read operations, the destination buffer to store - the results. For write operations, the source buffer - to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI - root bridge. - - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - - @retval EFI_INVALID_PARAMETER Buffer is NULL. - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoMemRead ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - OUT VOID *Buffer - ); - -/** - Enables a PCI driver to access PCI controller registers in the PCI root - bridge memory space. - - The Mem.Read(), and Mem.Write() functions enable a driver to access PCI - controller registers in the PCI root bridge memory space. - The memory operations are carried out exactly as requested. The caller is - responsible for satisfying any alignment and memory width restrictions that a - PCI Root Bridge on a platform might require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] Width Signifies the width of the memory operation. - - @param[in] Address The base address of the memory operation. The caller - is responsible for aligning the Address if required. - - @param[in] Count The number of memory operations to perform. Bytes - moved is Width size * Count, starting at Address. - - @param[in] Buffer For read operations, the destination buffer to store - the results. For write operations, the source buffer - to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI - root bridge. - - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - - @retval EFI_INVALID_PARAMETER Buffer is NULL. - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoMemWrite ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN VOID *Buffer - ); - -/** - Enables a PCI driver to access PCI controller registers in the PCI root - bridge I/O space. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] Width Signifies the width of the memory operations. - - @param[in] UserAddress The base address of the I/O operation. The caller is - responsible for aligning the Address if required. - - @param[in] Count The number of I/O operations to perform. Bytes moved - is Width size * Count, starting at Address. - - @param[out] UserBuffer For read operations, the destination buffer to store - the results. For write operations, the source buffer - to write data from. - - - @retval EFI_SUCCESS The data was read from or written to the PCI - root bridge. - - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - - @retval EFI_INVALID_PARAMETER Buffer is NULL. - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoIoRead ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 UserAddress, - IN UINTN Count, - OUT VOID *UserBuffer - ); - -/** - Enables a PCI driver to access PCI controller registers in the PCI root - bridge I/O space. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] Width Signifies the width of the memory operations. - - @param[in] UserAddress The base address of the I/O operation. The caller is - responsible for aligning the Address if required. - - @param[in] Count The number of I/O operations to perform. Bytes moved - is Width size * Count, starting at Address. - - @param[in] UserBuffer For read operations, the destination buffer to store - the results. For write operations, the source buffer - to write data from. - - - @retval EFI_SUCCESS The data was read from or written to the PCI - root bridge. - - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - - @retval EFI_INVALID_PARAMETER Buffer is NULL. - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoIoWrite ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 UserAddress, - IN UINTN Count, - IN VOID *UserBuffer - ); - -/** - Enables a PCI driver to copy one region of PCI root bridge memory space to - another region of PCI root bridge memory space. - - The CopyMem() function enables a PCI driver to copy one region of PCI root - bridge memory space to another region of PCI root bridge memory space. This - is especially useful for video scroll operation on a memory mapped video - buffer. - The memory operations are carried out exactly as requested. The caller is - responsible for satisfying any alignment and memory width restrictions that a - PCI root bridge on a platform might require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL - instance. - - @param[in] Width Signifies the width of the memory operations. - - @param[in] DestAddress The destination address of the memory operation. The - caller is responsible for aligning the DestAddress if - required. - - @param[in] SrcAddress The source address of the memory operation. The caller - is responsible for aligning the SrcAddress if - required. - - @param[in] Count The number of memory operations to perform. Bytes - moved is Width size * Count, starting at DestAddress - and SrcAddress. - - - @retval EFI_SUCCESS The data was copied from one memory region - to another memory region. - - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoCopyMem ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 DestAddress, - IN UINT64 SrcAddress, - IN UINTN Count - ); - -/** - Enables a PCI driver to access PCI controller registers in a PCI root - bridge's configuration space. - - The Pci.Read() and Pci.Write() functions enable a driver to access PCI - configuration registers for a PCI controller. - The PCI Configuration operations are carried out exactly as requested. The - caller is responsible for any alignment and PCI configuration width issues - that a PCI Root Bridge on a platform might require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] Width Signifies the width of the memory operations. - - @param[in] Address The address within the PCI configuration space for the - PCI controller. - - @param[in] Count The number of PCI configuration operations to perform. - Bytes moved is Width size * Count, starting at - Address. - - @param[out] Buffer For read operations, the destination buffer to store - the results. For write operations, the source buffer - to write data from. - - - @retval EFI_SUCCESS The data was read from or written to the PCI - root bridge. - - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - - @retval EFI_INVALID_PARAMETER Buffer is NULL. - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoPciRead ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - OUT VOID *Buffer - ); - -/** - Enables a PCI driver to access PCI controller registers in a PCI root - bridge's configuration space. - - The Pci.Read() and Pci.Write() functions enable a driver to access PCI - configuration registers for a PCI controller. - The PCI Configuration operations are carried out exactly as requested. The - caller is responsible for any alignment and PCI configuration width issues - that a PCI Root Bridge on a platform might require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] Width Signifies the width of the memory operations. - - @param[in] Address The address within the PCI configuration space for the - PCI controller. - - @param[in] Count The number of PCI configuration operations to perform. - Bytes moved is Width size * Count, starting at - Address. - - @param[in] Buffer For read operations, the destination buffer to store - the results. For write operations, the source buffer - to write data from. - - - @retval EFI_SUCCESS The data was read from or written to the PCI - root bridge. - - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - - @retval EFI_INVALID_PARAMETER Buffer is NULL. - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoPciWrite ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN VOID *Buffer - ); - -/** - Provides the PCI controller-specific addresses required to access system - memory from a DMA bus master. - - The Map() function provides the PCI controller specific addresses needed to - access system memory. This function is used to map system memory for PCI bus - master DMA accesses. - - @param[in] This A pointer to the - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] Operation Indicates if the bus master is going to read - or write to system memory. - - @param[in] HostAddress The system memory address to map to the PCI - controller. - - @param[in, out] NumberOfBytes On input the number of bytes to map. On - output the number of bytes that were mapped. - - @param[out] DeviceAddress The resulting map address for the bus master - PCI controller to use to access the system - memory's HostAddress. - - @param[out] Mapping The value to pass to Unmap() when the bus - master DMA operation is complete. - - @retval EFI_SUCCESS The range was mapped for the returned - NumberOfBytes. - - @retval EFI_INVALID_PARAMETER Operation is invalid. - - @retval EFI_INVALID_PARAMETER HostAddress is NULL. - - @retval EFI_INVALID_PARAMETER NumberOfBytes is NULL. - - @retval EFI_INVALID_PARAMETER DeviceAddress is NULL. - - @retval EFI_INVALID_PARAMETER Mapping is NULL. - - @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common - buffer. - - @retval EFI_DEVICE_ERROR The system hardware could not map the - requested address. - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoMap ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation, - IN VOID *HostAddress, - IN OUT UINTN *NumberOfBytes, - OUT EFI_PHYSICAL_ADDRESS *DeviceAddress, - OUT VOID **Mapping - ); - -/** - Completes the Map() operation and releases any corresponding resources. - - The Unmap() function completes the Map() operation and releases any - corresponding resources. - If the operation was an EfiPciOperationBusMasterWrite or - EfiPciOperationBusMasterWrite64, the data is committed to the target system - memory. - Any resources used for the mapping are freed. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] Mapping The mapping value returned from Map(). - - @retval EFI_SUCCESS The range was unmapped. - - @retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by - Map(). - - @retval EFI_DEVICE_ERROR The data was not committed to the target - system memory. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoUnmap ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN VOID *Mapping - ); - -/** - Allocates pages that are suitable for an EfiPciOperationBusMasterCommonBuffer - or EfiPciOperationBusMasterCommonBuffer64 mapping. - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param Type This parameter is not used and must be ignored. - - @param MemoryType The type of memory to allocate, EfiBootServicesData or - EfiRuntimeServicesData. - - @param Pages The number of pages to allocate. - - @param HostAddress A pointer to store the base system memory address of the - allocated range. - - @param Attributes The requested bit mask of attributes for the allocated - range. Only the attributes - EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE, - EFI_PCI_ATTRIBUTE_MEMORY_CACHED, and - EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE may be used with this - function. - - @retval EFI_SUCCESS The requested memory pages were allocated. - - @retval EFI_INVALID_PARAMETER MemoryType is invalid. - - @retval EFI_INVALID_PARAMETER HostAddress is NULL. - - @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal - attribute bits are MEMORY_WRITE_COMBINE, - MEMORY_CACHED, and DUAL_ADDRESS_CYCLE. - - @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoAllocateBuffer ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_ALLOCATE_TYPE Type, - IN EFI_MEMORY_TYPE MemoryType, - IN UINTN Pages, - OUT VOID **HostAddress, - IN UINT64 Attributes - ); - -/** - Frees memory that was allocated with AllocateBuffer(). - - The FreeBuffer() function frees memory that was allocated with - AllocateBuffer(). - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param Pages The number of pages to free. - - @param HostAddress The base system memory address of the allocated range. - - @retval EFI_SUCCESS The requested memory pages were freed. - - @retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and - Pages was not allocated with AllocateBuffer(). -**/ -EFI_STATUS -EFIAPI -RootBridgeIoFreeBuffer ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN UINTN Pages, - OUT VOID *HostAddress - ); - -/** - Flushes all PCI posted write transactions from a PCI host bridge to system - memory. - - The Flush() function flushes any PCI posted write transactions from a PCI - host bridge to system memory. Posted write transactions are generated by PCI - bus masters when they perform write transactions to target addresses in - system memory. - This function does not flush posted write transactions from any PCI bridges. - A PCI controller specific action must be taken to guarantee that the posted - write transactions have been flushed from the PCI controller and from all the - PCI bridges into the PCI host bridge. This is typically done with a PCI read - transaction from the PCI controller prior to calling Flush(). - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @retval EFI_SUCCESS The PCI posted write transactions were flushed - from the PCI host bridge to system memory. - - @retval EFI_DEVICE_ERROR The PCI posted write transactions were not flushed - from the PCI host bridge due to a hardware error. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoFlush ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This - ); - -/** - Gets the attributes that a PCI root bridge supports setting with - SetAttributes(), and the attributes that a PCI root bridge is currently - using. - - The GetAttributes() function returns the mask of attributes that this PCI - root bridge supports and the mask of attributes that the PCI root bridge is - currently using. - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param Supported A pointer to the mask of attributes that this PCI root - bridge supports setting with SetAttributes(). - - @param Attributes A pointer to the mask of attributes that this PCI root - bridge is currently using. - - - @retval EFI_SUCCESS If Supports is not NULL, then the attributes - that the PCI root bridge supports is returned - in Supports. If Attributes is not NULL, then - the attributes that the PCI root bridge is - currently using is returned in Attributes. - - @retval EFI_INVALID_PARAMETER Both Supports and Attributes are NULL. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoGetAttributes ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - OUT UINT64 *Supported, - OUT UINT64 *Attributes - ); - -/** - Sets attributes for a resource range on a PCI root bridge. - - The SetAttributes() function sets the attributes specified in Attributes for - the PCI root bridge on the resource range specified by ResourceBase and - ResourceLength. Since the granularity of setting these attributes may vary - from resource type to resource type, and from platform to platform, the - actual resource range and the one passed in by the caller may differ. As a - result, this function may set the attributes specified by Attributes on a - larger resource range than the caller requested. The actual range is returned - in ResourceBase and ResourceLength. The caller is responsible for verifying - that the actual range for which the attributes were set is acceptable. - - @param[in] This A pointer to the - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] Attributes The mask of attributes to set. If the - attribute bit MEMORY_WRITE_COMBINE, - MEMORY_CACHED, or MEMORY_DISABLE is set, - then the resource range is specified by - ResourceBase and ResourceLength. If - MEMORY_WRITE_COMBINE, MEMORY_CACHED, and - MEMORY_DISABLE are not set, then - ResourceBase and ResourceLength are ignored, - and may be NULL. - - @param[in, out] ResourceBase A pointer to the base address of the - resource range to be modified by the - attributes specified by Attributes. - - @param[in, out] ResourceLength A pointer to the length of the resource - range to be modified by the attributes - specified by Attributes. - - @retval EFI_SUCCESS The current configuration of this PCI root bridge - was returned in Resources. - - @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge - could not be retrieved. - - @retval EFI_INVALID_PARAMETER Invalid pointer of - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoSetAttributes ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN UINT64 Attributes, - IN OUT UINT64 *ResourceBase, - IN OUT UINT64 *ResourceLength - ); - -/** - Retrieves the current resource settings of this PCI root bridge in the form - of a set of ACPI 2.0 resource descriptors. - - There are only two resource descriptor types from the ACPI Specification that - may be used to describe the current resources allocated to a PCI root bridge. - These are the QWORD Address Space Descriptor (ACPI 2.0 Section 6.4.3.5.1), - and the End Tag (ACPI 2.0 Section 6.4.2.8). The QWORD Address Space - Descriptor can describe memory, I/O, and bus number ranges for dynamic or - fixed resources. The configuration of a PCI root bridge is described with one - or more QWORD Address Space Descriptors followed by an End Tag. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[out] Resources A pointer to the ACPI 2.0 resource descriptors that - describe the current configuration of this PCI root - bridge. The storage for the ACPI 2.0 resource - descriptors is allocated by this function. The - caller must treat the return buffer as read-only - data, and the buffer must not be freed by the - caller. - - @retval EFI_SUCCESS The current configuration of this PCI root bridge - was returned in Resources. - - @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge - could not be retrieved. - - @retval EFI_INVALID_PARAMETER Invalid pointer of - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL -**/ -EFI_STATUS -EFIAPI -RootBridgeIoConfiguration ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - OUT VOID **Resources - ); - -// -// Memory Controller Pci Root Bridge Io Module Variables -// -EFI_METRONOME_ARCH_PROTOCOL *mMetronome; - -// -// Lookup table for increment values based on transfer widths -// -UINT8 mInStride[] = { - 1, // EfiPciWidthUint8 - 2, // EfiPciWidthUint16 - 4, // EfiPciWidthUint32 - 8, // EfiPciWidthUint64 - 0, // EfiPciWidthFifoUint8 - 0, // EfiPciWidthFifoUint16 - 0, // EfiPciWidthFifoUint32 - 0, // EfiPciWidthFifoUint64 - 1, // EfiPciWidthFillUint8 - 2, // EfiPciWidthFillUint16 - 4, // EfiPciWidthFillUint32 - 8 // EfiPciWidthFillUint64 -}; - -// -// Lookup table for increment values based on transfer widths -// -UINT8 mOutStride[] = { - 1, // EfiPciWidthUint8 - 2, // EfiPciWidthUint16 - 4, // EfiPciWidthUint32 - 8, // EfiPciWidthUint64 - 1, // EfiPciWidthFifoUint8 - 2, // EfiPciWidthFifoUint16 - 4, // EfiPciWidthFifoUint32 - 8, // EfiPciWidthFifoUint64 - 0, // EfiPciWidthFillUint8 - 0, // EfiPciWidthFillUint16 - 0, // EfiPciWidthFillUint32 - 0 // EfiPciWidthFillUint64 -}; - -/** - Construct the Pci Root Bridge Io protocol - - @param Protocol Point to protocol instance - - @param HostBridgeHandle Handle of host bridge - - @param Attri Attribute of host bridge - - @param ResAperture ResourceAperture for host bridge - - @retval EFI_SUCCESS Success to initialize the Pci Root Bridge. -**/ -EFI_STATUS -RootBridgeConstructor ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *Protocol, - IN EFI_HANDLE HostBridgeHandle, - IN UINT64 Attri, - IN PCI_ROOT_BRIDGE_RESOURCE_APERTURE *ResAperture - ) -{ - EFI_STATUS Status; - PCI_ROOT_BRIDGE_INSTANCE *PrivateData; - PCI_RESOURCE_TYPE Index; - - PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (Protocol); - - // - // The host to pci bridge, the host memory and io addresses are - // direct mapped to pci addresses, so no need translate, set bases to 0. - // - PrivateData->MemBase = ResAperture->MemBase; - PrivateData->IoBase = ResAperture->IoBase; - - // - // The host bridge only supports 32bit addressing for memory - // and standard IA32 16bit io - // - PrivateData->MemLimit = ResAperture->MemLimit; - PrivateData->IoLimit = ResAperture->IoLimit; - - // - // Bus Aperture for this Root Bridge (Possible Range) - // - PrivateData->BusBase = ResAperture->BusBase; - PrivateData->BusLimit = ResAperture->BusLimit; - - // - // Specific for this chipset - // - for (Index = TypeIo; Index < TypeMax; Index++) { - PrivateData->ResAllocNode[Index].Type = Index; - PrivateData->ResAllocNode[Index].Base = 0; - PrivateData->ResAllocNode[Index].Length = 0; - PrivateData->ResAllocNode[Index].Status = ResNone; - } - - PrivateData->RootBridgeAttrib = Attri; - - PrivateData->Supports = EFI_PCI_ATTRIBUTE_IDE_PRIMARY_IO | - EFI_PCI_ATTRIBUTE_IDE_SECONDARY_IO | - EFI_PCI_ATTRIBUTE_ISA_IO_16 | - EFI_PCI_ATTRIBUTE_ISA_MOTHERBOARD_IO | - EFI_PCI_ATTRIBUTE_VGA_MEMORY | - EFI_PCI_ATTRIBUTE_VGA_IO_16 | - EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO_16; - PrivateData->Attributes = PrivateData->Supports; - - Protocol->ParentHandle = HostBridgeHandle; - - Protocol->PollMem = RootBridgeIoPollMem; - Protocol->PollIo = RootBridgeIoPollIo; - - Protocol->Mem.Read = RootBridgeIoMemRead; - Protocol->Mem.Write = RootBridgeIoMemWrite; - - Protocol->Io.Read = RootBridgeIoIoRead; - Protocol->Io.Write = RootBridgeIoIoWrite; - - Protocol->CopyMem = RootBridgeIoCopyMem; - - Protocol->Pci.Read = RootBridgeIoPciRead; - Protocol->Pci.Write = RootBridgeIoPciWrite; - - Protocol->Map = RootBridgeIoMap; - Protocol->Unmap = RootBridgeIoUnmap; - - Protocol->AllocateBuffer = RootBridgeIoAllocateBuffer; - Protocol->FreeBuffer = RootBridgeIoFreeBuffer; - - Protocol->Flush = RootBridgeIoFlush; - - Protocol->GetAttributes = RootBridgeIoGetAttributes; - Protocol->SetAttributes = RootBridgeIoSetAttributes; - - Protocol->Configuration = RootBridgeIoConfiguration; - - Protocol->SegmentNumber = 0; - - Status = gBS->LocateProtocol (&gEfiMetronomeArchProtocolGuid, NULL, - (VOID **)&mMetronome); - ASSERT_EFI_ERROR (Status); - - return EFI_SUCCESS; -} - -/** - Check parameters for IO,MMIO,PCI read/write services of PCI Root Bridge IO. - - The I/O operations are carried out exactly as requested. The caller is - responsible for satisfying any alignment and I/O width restrictions that a PI - System on a platform might require. For example on some platforms, width - requests of EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other - hand, will be handled by the driver. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] OperationType I/O operation type: IO/MMIO/PCI. - - @param[in] Width Signifies the width of the I/O or Memory operation. - - @param[in] Address The base address of the I/O operation. - - @param[in] Count The number of I/O operations to perform. The number - of bytes moved is Width size * Count, starting at - Address. - - @param[in] Buffer For read operations, the destination buffer to - store the results. For write operations, the source - buffer from which to write data. - - @retval EFI_SUCCESS The parameters for this request pass the - checks. - - @retval EFI_INVALID_PARAMETER Width is invalid for this PI system. - - @retval EFI_INVALID_PARAMETER Buffer is NULL. - - @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width. - - @retval EFI_UNSUPPORTED The address range specified by Address, Width, - and Count is not valid for this PI system. -**/ -EFI_STATUS -RootBridgeIoCheckParameter ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN OPERATION_TYPE OperationType, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN VOID *Buffer - ) -{ - PCI_ROOT_BRIDGE_INSTANCE *PrivateData; - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *PciRbAddr; - UINT64 MaxCount; - UINT64 Base; - UINT64 Limit; - - // - // Check to see if Buffer is NULL - // - if (Buffer == NULL) { - return EFI_INVALID_PARAMETER; - } - - // - // Check to see if Width is in the valid range - // - if ((UINT32)Width >= EfiPciWidthMaximum) { - return EFI_INVALID_PARAMETER; - } - - // - // For FIFO type, the target address won't increase during the access, - // so treat Count as 1 - // - if (Width >= EfiPciWidthFifoUint8 && Width <= EfiPciWidthFifoUint64) { - Count = 1; - } - - // - // Check to see if Width is in the valid range for I/O Port operations - // - Width = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03); - if ((OperationType != MemOperation) && (Width == EfiPciWidthUint64)) { - ASSERT (FALSE); - return EFI_INVALID_PARAMETER; - } - - // - // Check to see if Address is aligned - // - if ((Address & (UINT64)(mInStride[Width] - 1)) != 0) { - return EFI_UNSUPPORTED; - } - - PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This); - - // - // Check to see if any address associated with this transfer exceeds the - // maximum allowed address. The maximum address implied by the parameters - // passed in is Address + Size * Count. If the following condition is met, - // then the transfer is not supported. - // - // Address + Size * Count > Limit + 1 - // - // Since Limit can be the maximum integer value supported by the CPU and - // Count can also be the maximum integer value supported by the CPU, this - // range check must be adjusted to avoid all oveflow conditions. - // - // The following form of the range check is equivalent but assumes that - // Limit is of the form (2^n - 1). - // - if (OperationType == IoOperation) { - Base = PrivateData->IoBase; - Limit = PrivateData->IoLimit; - } else if (OperationType == MemOperation) { - Base = PrivateData->MemBase; - Limit = PrivateData->MemLimit; - } else { - PciRbAddr = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS*) &Address; - if (PciRbAddr->Bus < PrivateData->BusBase || - PciRbAddr->Bus > PrivateData->BusLimit) { - return EFI_INVALID_PARAMETER; - } - - if (PciRbAddr->Device > MAX_PCI_DEVICE_NUMBER || - PciRbAddr->Function > MAX_PCI_FUNCTION_NUMBER) { - return EFI_INVALID_PARAMETER; - } - - if (PciRbAddr->ExtendedRegister != 0) { - Address = PciRbAddr->ExtendedRegister; - } else { - Address = PciRbAddr->Register; - } - Base = 0; - Limit = MAX_PCI_REG_ADDRESS; - } - - if (Address < Base) { - return EFI_INVALID_PARAMETER; - } - - if (Count == 0) { - if (Address > Limit) { - return EFI_UNSUPPORTED; - } - } else { - MaxCount = RShiftU64 (Limit, Width); - if (MaxCount < (Count - 1)) { - return EFI_UNSUPPORTED; - } - if (Address > LShiftU64 (MaxCount - Count + 1, Width)) { - return EFI_UNSUPPORTED; - } - } - - return EFI_SUCCESS; -} - -/** - Internal help function for read and write memory space. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] Write Switch value for Read or Write. - - @param[in] Width Signifies the width of the memory operations. - - @param[in] UserAddress The address within the PCI configuration space for - the PCI controller. - - @param[in] Count The number of PCI configuration operations to - perform. Bytes moved is Width size * Count, - starting at Address. - - @param[in, out] UserBuffer For read operations, the destination buffer to - store the results. For write operations, the - source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI - root bridge. - - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - - @retval EFI_INVALID_PARAMETER Buffer is NULL. - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. -**/ -EFI_STATUS -RootBridgeIoMemRW ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN BOOLEAN Write, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN OUT VOID *Buffer - ) -{ - EFI_STATUS Status; - UINT8 InStride; - UINT8 OutStride; - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH OperationWidth; - UINT8 *Uint8Buffer; - - Status = RootBridgeIoCheckParameter (This, MemOperation, Width, Address, - Count, Buffer); - if (EFI_ERROR (Status)) { - return Status; - } - - InStride = mInStride[Width]; - OutStride = mOutStride[Width]; - OperationWidth = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03); - for (Uint8Buffer = Buffer; - Count > 0; - Address += InStride, Uint8Buffer += OutStride, Count--) { - if (Write) { - switch (OperationWidth) { - case EfiPciWidthUint8: - MmioWrite8 ((UINTN)Address, *Uint8Buffer); - break; - case EfiPciWidthUint16: - MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer)); - break; - case EfiPciWidthUint32: - MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer)); - break; - case EfiPciWidthUint64: - MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer)); - break; - default: - // - // The RootBridgeIoCheckParameter call above will ensure that this - // path is not taken. - // - ASSERT (FALSE); - break; - } - } else { - switch (OperationWidth) { - case EfiPciWidthUint8: - *Uint8Buffer = MmioRead8 ((UINTN)Address); - break; - case EfiPciWidthUint16: - *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address); - break; - case EfiPciWidthUint32: - *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address); - break; - case EfiPciWidthUint64: - *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address); - break; - default: - // - // The RootBridgeIoCheckParameter call above will ensure that this - // path is not taken. - // - ASSERT (FALSE); - break; - } - } - } - return EFI_SUCCESS; -} - -/** - Internal help function for read and write IO space. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] Write Switch value for Read or Write. - - @param[in] Width Signifies the width of the memory operations. - - @param[in] UserAddress The address within the PCI configuration space for - the PCI controller. - - @param[in] Count The number of PCI configuration operations to - perform. Bytes moved is Width size * Count, - starting at Address. - - @param[in, out] UserBuffer For read operations, the destination buffer to - store the results. For write operations, the - source buffer to write data from. - - - @retval EFI_SUCCESS The data was read from or written to the PCI - root bridge. - - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - - @retval EFI_INVALID_PARAMETER Buffer is NULL. - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. -**/ -EFI_STATUS -RootBridgeIoIoRW ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN BOOLEAN Write, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN OUT VOID *Buffer - ) -{ - EFI_STATUS Status; - UINT8 InStride; - UINT8 OutStride; - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH OperationWidth; - UINT8 *Uint8Buffer; - - Status = RootBridgeIoCheckParameter (This, IoOperation, Width, Address, - Count, Buffer); - if (EFI_ERROR (Status)) { - return Status; - } - - InStride = mInStride[Width]; - OutStride = mOutStride[Width]; - OperationWidth = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03); - -#if defined (MDE_CPU_IA32) || defined (MDE_CPU_X64) - if (InStride == 0) { - if (Write) { - switch (OperationWidth) { - case EfiPciWidthUint8: - IoWriteFifo8 ((UINTN) Address, Count, Buffer); - return EFI_SUCCESS; - case EfiPciWidthUint16: - IoWriteFifo16 ((UINTN) Address, Count, Buffer); - return EFI_SUCCESS; - case EfiPciWidthUint32: - IoWriteFifo32 ((UINTN) Address, Count, Buffer); - return EFI_SUCCESS; - default: - // - // The RootBridgeIoCheckParameter call above will ensure that this - // path is not taken. - // - ASSERT (FALSE); - break; - } - } else { - switch (OperationWidth) { - case EfiPciWidthUint8: - IoReadFifo8 ((UINTN) Address, Count, Buffer); - return EFI_SUCCESS; - case EfiPciWidthUint16: - IoReadFifo16 ((UINTN) Address, Count, Buffer); - return EFI_SUCCESS; - case EfiPciWidthUint32: - IoReadFifo32 ((UINTN) Address, Count, Buffer); - return EFI_SUCCESS; - default: - // - // The RootBridgeIoCheckParameter call above will ensure that this - // path is not taken. - // - ASSERT (FALSE); - break; - } - } - } -#endif - - for (Uint8Buffer = Buffer; - Count > 0; - Address += InStride, Uint8Buffer += OutStride, Count--) { - if (Write) { - switch (OperationWidth) { - case EfiPciWidthUint8: - IoWrite8 ((UINTN)Address, *Uint8Buffer); - break; - case EfiPciWidthUint16: - IoWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer)); - break; - case EfiPciWidthUint32: - IoWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer)); - break; - default: - // - // The RootBridgeIoCheckParameter call above will ensure that this - // path is not taken. - // - ASSERT (FALSE); - break; - } - } else { - switch (OperationWidth) { - case EfiPciWidthUint8: - *Uint8Buffer = IoRead8 ((UINTN)Address); - break; - case EfiPciWidthUint16: - *((UINT16 *)Uint8Buffer) = IoRead16 ((UINTN)Address); - break; - case EfiPciWidthUint32: - *((UINT32 *)Uint8Buffer) = IoRead32 ((UINTN)Address); - break; - default: - // - // The RootBridgeIoCheckParameter call above will ensure that this - // path is not taken. - // - ASSERT (FALSE); - break; - } - } - } - return EFI_SUCCESS; -} - -/** - Internal help function for read and write PCI configuration space. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] Write Switch value for Read or Write. - - @param[in] Width Signifies the width of the memory operations. - - @param[in] UserAddress The address within the PCI configuration space for - the PCI controller. - - @param[in] Count The number of PCI configuration operations to - perform. Bytes moved is Width size * Count, - starting at Address. - - @param[in, out] UserBuffer For read operations, the destination buffer to - store the results. For write operations, the - source buffer to write data from. - - - @retval EFI_SUCCESS The data was read from or written to the PCI - root bridge. - - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - - @retval EFI_INVALID_PARAMETER Buffer is NULL. - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. -**/ -EFI_STATUS -RootBridgeIoPciRW ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN BOOLEAN Write, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN OUT VOID *Buffer - ) -{ - EFI_STATUS Status; - UINT8 InStride; - UINT8 OutStride; - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH OperationWidth; - UINT8 *Uint8Buffer; - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *PciRbAddr; - UINTN PcieRegAddr; - - Status = RootBridgeIoCheckParameter (This, PciOperation, Width, Address, - Count, Buffer); - if (EFI_ERROR (Status)) { - return Status; - } - - PciRbAddr = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS*) &Address; - - PcieRegAddr = (UINTN) PCI_LIB_ADDRESS ( - PciRbAddr->Bus, - PciRbAddr->Device, - PciRbAddr->Function, - (PciRbAddr->ExtendedRegister != 0) ? \ - PciRbAddr->ExtendedRegister : - PciRbAddr->Register - ); - - InStride = mInStride[Width]; - OutStride = mOutStride[Width]; - OperationWidth = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03); - for (Uint8Buffer = Buffer; - Count > 0; - PcieRegAddr += InStride, Uint8Buffer += OutStride, Count--) { - if (Write) { - switch (OperationWidth) { - case EfiPciWidthUint8: - PciWrite8 (PcieRegAddr, *Uint8Buffer); - break; - case EfiPciWidthUint16: - PciWrite16 (PcieRegAddr, *((UINT16 *)Uint8Buffer)); - break; - case EfiPciWidthUint32: - PciWrite32 (PcieRegAddr, *((UINT32 *)Uint8Buffer)); - break; - default: - // - // The RootBridgeIoCheckParameter call above will ensure that this - // path is not taken. - // - ASSERT (FALSE); - break; - } - } else { - switch (OperationWidth) { - case EfiPciWidthUint8: - *Uint8Buffer = PciRead8 (PcieRegAddr); - break; - case EfiPciWidthUint16: - *((UINT16 *)Uint8Buffer) = PciRead16 (PcieRegAddr); - break; - case EfiPciWidthUint32: - *((UINT32 *)Uint8Buffer) = PciRead32 (PcieRegAddr); - break; - default: - // - // The RootBridgeIoCheckParameter call above will ensure that this - // path is not taken. - // - ASSERT (FALSE); - break; - } - } - } - - return EFI_SUCCESS; -} - -/** - Polls an address in memory mapped I/O space until an exit condition is met, - or a timeout occurs. - - This function provides a standard way to poll a PCI memory location. A PCI - memory read operation is performed at the PCI memory address specified by - Address for the width specified by Width. The result of this PCI memory read - operation is stored in Result. This PCI memory read operation is repeated - until either a timeout of Delay 100 ns units has expired, or (Result & Mask) - is equal to Value. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] Width Signifies the width of the memory operations. - - @param[in] Address The base address of the memory operations. The caller - is responsible for aligning Address if required. - - @param[in] Mask Mask used for the polling criteria. Bytes above Width - in Mask are ignored. The bits in the bytes below Width - which are zero in Mask are ignored when polling the - memory address. - - @param[in] Value The comparison value used for the polling exit - criteria. - - @param[in] Delay The number of 100 ns units to poll. Note that timer - available may be of poorer granularity. - - @param[out] Result Pointer to the last value read from the memory - location. - - @retval EFI_SUCCESS The last data returned from the access matched - the poll exit criteria. - - @retval EFI_INVALID_PARAMETER Width is invalid. - - @retval EFI_INVALID_PARAMETER Result is NULL. - - @retval EFI_TIMEOUT Delay expired before a match occurred. - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoPollMem ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINT64 Mask, - IN UINT64 Value, - IN UINT64 Delay, - OUT UINT64 *Result - ) -{ - EFI_STATUS Status; - UINT64 NumberOfTicks; - UINT32 Remainder; - - if (Result == NULL) { - return EFI_INVALID_PARAMETER; - } - - if ((UINT32)Width > EfiPciWidthUint64) { - return EFI_INVALID_PARAMETER; - } - - // - // No matter what, always do a single poll. - // - Status = This->Mem.Read (This, Width, Address, 1, Result); - if (EFI_ERROR (Status)) { - return Status; - } - if ((*Result & Mask) == Value) { - return EFI_SUCCESS; - } - - if (Delay == 0) { - return EFI_SUCCESS; - - } else { - - // - // Determine the proper # of metronome ticks to wait for polling the - // location. The nuber of ticks is Roundup (Delay / - // mMetronome->TickPeriod)+1 - // The "+1" to account for the possibility of the first tick being short - // because we started in the middle of a tick. - // - // BugBug: overriding mMetronome->TickPeriod with UINT32 until Metronome - // protocol definition is updated. - // - NumberOfTicks = DivU64x32Remainder (Delay, (UINT32) mMetronome->TickPeriod, - &Remainder); - if (Remainder != 0) { - NumberOfTicks += 1; - } - NumberOfTicks += 1; - - while (NumberOfTicks != 0) { - - mMetronome->WaitForTick (mMetronome, 1); - - Status = This->Mem.Read (This, Width, Address, 1, Result); - if (EFI_ERROR (Status)) { - return Status; - } - - if ((*Result & Mask) == Value) { - return EFI_SUCCESS; - } - - NumberOfTicks -= 1; - } - } - return EFI_TIMEOUT; -} - -/** - Reads from the I/O space of a PCI Root Bridge. Returns when either the - polling exit criteria is satisfied or after a defined duration. - - This function provides a standard way to poll a PCI I/O location. A PCI I/O - read operation is performed at the PCI I/O address specified by Address for - the width specified by Width. - The result of this PCI I/O read operation is stored in Result. This PCI I/O - read operation is repeated until either a timeout of Delay 100 ns units has - expired, or (Result & Mask) is equal to Value. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] Width Signifies the width of the I/O operations. - - @param[in] Address The base address of the I/O operations. The caller is - responsible for aligning Address if required. - - @param[in] Mask Mask used for the polling criteria. Bytes above Width in - Mask are ignored. The bits in the bytes below Width - which are zero in Mask are ignored when polling the I/O - address. - - @param[in] Value The comparison value used for the polling exit criteria. - - @param[in] Delay The number of 100 ns units to poll. Note that timer - available may be of poorer granularity. - - @param[out] Result Pointer to the last value read from the memory location. - - @retval EFI_SUCCESS The last data returned from the access matched - the poll exit criteria. - - @retval EFI_INVALID_PARAMETER Width is invalid. - - @retval EFI_INVALID_PARAMETER Result is NULL. - - @retval EFI_TIMEOUT Delay expired before a match occurred. - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoPollIo ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINT64 Mask, - IN UINT64 Value, - IN UINT64 Delay, - OUT UINT64 *Result - ) -{ - EFI_STATUS Status; - UINT64 NumberOfTicks; - UINT32 Remainder; - - // - // No matter what, always do a single poll. - // - - if (Result == NULL) { - return EFI_INVALID_PARAMETER; - } - - if ((UINT32)Width > EfiPciWidthUint64) { - return EFI_INVALID_PARAMETER; - } - - Status = This->Io.Read (This, Width, Address, 1, Result); - if (EFI_ERROR (Status)) { - return Status; - } - if ((*Result & Mask) == Value) { - return EFI_SUCCESS; - } - - if (Delay == 0) { - return EFI_SUCCESS; - - } else { - - // - // Determine the proper # of metronome ticks to wait for polling the - // location. The number of ticks is Roundup (Delay / - // mMetronome->TickPeriod)+1 - // The "+1" to account for the possibility of the first tick being short - // because we started in the middle of a tick. - // - NumberOfTicks = DivU64x32Remainder (Delay, (UINT32)mMetronome->TickPeriod, - &Remainder); - if (Remainder != 0) { - NumberOfTicks += 1; - } - NumberOfTicks += 1; - - while (NumberOfTicks != 0) { - - mMetronome->WaitForTick (mMetronome, 1); - - Status = This->Io.Read (This, Width, Address, 1, Result); - if (EFI_ERROR (Status)) { - return Status; - } - - if ((*Result & Mask) == Value) { - return EFI_SUCCESS; - } - - NumberOfTicks -= 1; - } - } - return EFI_TIMEOUT; -} - -/** - Enables a PCI driver to access PCI controller registers in the PCI root - bridge memory space. - - The Mem.Read(), and Mem.Write() functions enable a driver to access PCI - controller registers in the PCI root bridge memory space. - The memory operations are carried out exactly as requested. The caller is - responsible for satisfying any alignment and memory width restrictions that a - PCI Root Bridge on a platform might require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] Width Signifies the width of the memory operation. - - @param[in] Address The base address of the memory operation. The caller - is responsible for aligning the Address if required. - - @param[in] Count The number of memory operations to perform. Bytes - moved is Width size * Count, starting at Address. - - @param[out] Buffer For read operations, the destination buffer to store - the results. For write operations, the source buffer - to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI - root bridge. - - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - - @retval EFI_INVALID_PARAMETER Buffer is NULL. - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoMemRead ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - OUT VOID *Buffer - ) -{ - return RootBridgeIoMemRW (This, FALSE, Width, Address, Count, Buffer); -} - -/** - Enables a PCI driver to access PCI controller registers in the PCI root - bridge memory space. - - The Mem.Read(), and Mem.Write() functions enable a driver to access PCI - controller registers in the PCI root bridge memory space. - The memory operations are carried out exactly as requested. The caller is - responsible for satisfying any alignment and memory width restrictions that a - PCI Root Bridge on a platform might require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] Width Signifies the width of the memory operation. - - @param[in] Address The base address of the memory operation. The caller - is responsible for aligning the Address if required. - - @param[in] Count The number of memory operations to perform. Bytes - moved is Width size * Count, starting at Address. - - @param[in] Buffer For read operations, the destination buffer to store - the results. For write operations, the source buffer - to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI - root bridge. - - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - - @retval EFI_INVALID_PARAMETER Buffer is NULL. - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoMemWrite ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN VOID *Buffer - ) -{ - return RootBridgeIoMemRW (This, TRUE, Width, Address, Count, Buffer); -} - -/** - Enables a PCI driver to access PCI controller registers in the PCI root - bridge I/O space. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] Width Signifies the width of the memory operations. - - @param[in] Address The base address of the I/O operation. The caller is - responsible for aligning the Address if required. - - @param[in] Count The number of I/O operations to perform. Bytes moved - is Width size * Count, starting at Address. - - @param[out] Buffer For read operations, the destination buffer to store - the results. For write operations, the source buffer - to write data from. - - - @retval EFI_SUCCESS The data was read from or written to the PCI - root bridge. - - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - - @retval EFI_INVALID_PARAMETER Buffer is NULL. - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoIoRead ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - OUT VOID *Buffer - ) -{ - return RootBridgeIoIoRW (This, FALSE, Width, Address, Count, Buffer); -} - -/** - Enables a PCI driver to access PCI controller registers in the PCI root - bridge I/O space. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] Width Signifies the width of the memory operations. - - @param[in] Address The base address of the I/O operation. The caller is - responsible for aligning the Address if required. - - @param[in] Count The number of I/O operations to perform. Bytes moved - is Width size * Count, starting at Address. - - @param[in] Buffer For read operations, the destination buffer to store - the results. For write operations, the source buffer - to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI - root bridge. - - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - - @retval EFI_INVALID_PARAMETER Buffer is NULL. - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoIoWrite ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN VOID *Buffer - ) -{ - return RootBridgeIoIoRW (This, TRUE, Width, Address, Count, Buffer); -} - -/** - Enables a PCI driver to copy one region of PCI root bridge memory space to - another region of PCI root bridge memory space. - - The CopyMem() function enables a PCI driver to copy one region of PCI root - bridge memory space to another region of PCI root bridge memory space. This - is especially useful for video scroll operation on a memory mapped video - buffer. - The memory operations are carried out exactly as requested. The caller is - responsible for satisfying any alignment and memory width restrictions that a - PCI root bridge on a platform might require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL - instance. - - @param[in] Width Signifies the width of the memory operations. - - @param[in] DestAddress The destination address of the memory operation. The - caller is responsible for aligning the DestAddress if - required. - - @param[in] SrcAddress The source address of the memory operation. The caller - is responsible for aligning the SrcAddress if - required. - - @param[in] Count The number of memory operations to perform. Bytes - moved is Width size * Count, starting at DestAddress - and SrcAddress. - - @retval EFI_SUCCESS The data was copied from one memory region - to another memory region. - - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoCopyMem ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 DestAddress, - IN UINT64 SrcAddress, - IN UINTN Count - ) -{ - EFI_STATUS Status; - BOOLEAN Direction; - UINTN Stride; - UINTN Index; - UINT64 Result; - - if ((UINT32)Width > EfiPciWidthUint64) { - return EFI_INVALID_PARAMETER; - } - - if (DestAddress == SrcAddress) { - return EFI_SUCCESS; - } - - Stride = (UINTN)(1 << Width); - - Direction = TRUE; - if ((DestAddress > SrcAddress) && - (DestAddress < (SrcAddress + Count * Stride))) { - Direction = FALSE; - SrcAddress = SrcAddress + (Count-1) * Stride; - DestAddress = DestAddress + (Count-1) * Stride; - } - - for (Index = 0;Index < Count;Index++) { - Status = RootBridgeIoMemRead ( - This, - Width, - SrcAddress, - 1, - &Result - ); - if (EFI_ERROR (Status)) { - return Status; - } - Status = RootBridgeIoMemWrite ( - This, - Width, - DestAddress, - 1, - &Result - ); - if (EFI_ERROR (Status)) { - return Status; - } - if (Direction) { - SrcAddress += Stride; - DestAddress += Stride; - } else { - SrcAddress -= Stride; - DestAddress -= Stride; - } - } - return EFI_SUCCESS; -} - -/** - Enables a PCI driver to access PCI controller registers in a PCI root - bridge's configuration space. - - The Pci.Read() and Pci.Write() functions enable a driver to access PCI - configuration registers for a PCI controller. - The PCI Configuration operations are carried out exactly as requested. The - caller is responsible for any alignment and PCI configuration width issues - that a PCI Root Bridge on a platform might require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] Width Signifies the width of the memory operations. - - @param[in] Address The address within the PCI configuration space for the - PCI controller. - - @param[in] Count The number of PCI configuration operations to perform. - Bytes moved is Width size * Count, starting at - Address. - - @param[out] Buffer For read operations, the destination buffer to store - the results. For write operations, the source buffer - to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI - root bridge. - - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - - @retval EFI_INVALID_PARAMETER Buffer is NULL. - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoPciRead ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - OUT VOID *Buffer - ) -{ - return RootBridgeIoPciRW (This, FALSE, Width, Address, Count, Buffer); -} - -/** - Enables a PCI driver to access PCI controller registers in a PCI root - bridge's configuration space. - - The Pci.Read() and Pci.Write() functions enable a driver to access PCI - configuration registers for a PCI controller. - The PCI Configuration operations are carried out exactly as requested. The - caller is responsible for any alignment and PCI configuration width issues - that a PCI Root Bridge on a platform might require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] Width Signifies the width of the memory operations. - - @param[in] Address The address within the PCI configuration space for the - PCI controller. - - @param[in] Count The number of PCI configuration operations to perform. - Bytes moved is Width size * Count, starting at - Address. - - @param[in] Buffer For read operations, the destination buffer to store - the results. For write operations, the source buffer - to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI - root bridge. - - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - - @retval EFI_INVALID_PARAMETER Buffer is NULL. - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoPciWrite ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN VOID *Buffer - ) -{ - return RootBridgeIoPciRW (This, TRUE, Width, Address, Count, Buffer); -} - -/** - Provides the PCI controller-specific addresses required to access system - memory from a DMA bus master. - - The Map() function provides the PCI controller specific addresses needed to - access system memory. This function is used to map system memory for PCI bus - master DMA accesses. - - @param[in] This A pointer to the - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] Operation Indicates if the bus master is going to read - or write to system memory. - - @param[in] HostAddress The system memory address to map to the PCI - controller. - - @param[in, out] NumberOfBytes On input the number of bytes to map. On - output the number of bytes that were mapped. - - @param[out] DeviceAddress The resulting map address for the bus master - PCI controller to use to access the system - memory's HostAddress. - - @param[out] Mapping The value to pass to Unmap() when the bus - master DMA operation is complete. - - @retval EFI_SUCCESS The range was mapped for the returned - NumberOfBytes. - - @retval EFI_INVALID_PARAMETER Operation is invalid. - - @retval EFI_INVALID_PARAMETER HostAddress is NULL. - - @retval EFI_INVALID_PARAMETER NumberOfBytes is NULL. - - @retval EFI_INVALID_PARAMETER DeviceAddress is NULL. - - @retval EFI_INVALID_PARAMETER Mapping is NULL. - - @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common - buffer. - - @retval EFI_DEVICE_ERROR The system hardware could not map the - requested address. - - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a - lack of resources. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoMap ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation, - IN VOID *HostAddress, - IN OUT UINTN *NumberOfBytes, - OUT EFI_PHYSICAL_ADDRESS *DeviceAddress, - OUT VOID **Mapping - ) -{ - EFI_STATUS Status; - EFI_PHYSICAL_ADDRESS PhysicalAddress; - MAP_INFO *MapInfo; - - if (HostAddress == NULL || NumberOfBytes == NULL || DeviceAddress == NULL || - Mapping == NULL) { - return EFI_INVALID_PARAMETER; - } - - // - // Initialize the return values to their defaults - // - *Mapping = NULL; - - // - // Make sure that Operation is valid - // - if ((UINT32)Operation >= EfiPciOperationMaximum) { - return EFI_INVALID_PARAMETER; - } - - // - // Most PCAT like chipsets can not handle performing DMA above 4GB. - // If any part of the DMA transfer being mapped is above 4GB, then - // map the DMA transfer to a buffer below 4GB. - // - PhysicalAddress = (EFI_PHYSICAL_ADDRESS) (UINTN) HostAddress; - if ((PhysicalAddress + *NumberOfBytes) > 0x100000000ULL) { - - // - // Common Buffer operations can not be remapped. If the common buffer - // if above 4GB, then it is not possible to generate a mapping, so return - // an error. - // - if (Operation == EfiPciOperationBusMasterCommonBuffer || - Operation == EfiPciOperationBusMasterCommonBuffer64) { - return EFI_UNSUPPORTED; - } - - // - // Allocate a MAP_INFO structure to remember the mapping when Unmap() is - // called later. - // - Status = gBS->AllocatePool ( - EfiBootServicesData, - sizeof(MAP_INFO), - (VOID **)&MapInfo - ); - if (EFI_ERROR (Status)) { - *NumberOfBytes = 0; - return Status; - } - - // - // Return a pointer to the MAP_INFO structure in Mapping - // - *Mapping = MapInfo; - - // - // Initialize the MAP_INFO structure - // - MapInfo->Operation = Operation; - MapInfo->NumberOfBytes = *NumberOfBytes; - MapInfo->NumberOfPages = EFI_SIZE_TO_PAGES(*NumberOfBytes); - MapInfo->HostAddress = PhysicalAddress; - MapInfo->MappedHostAddress = 0x00000000ffffffff; - - // - // Allocate a buffer below 4GB to map the transfer to. - // - Status = gBS->AllocatePages ( - AllocateMaxAddress, - EfiBootServicesData, - MapInfo->NumberOfPages, - &MapInfo->MappedHostAddress - ); - if (EFI_ERROR (Status)) { - gBS->FreePool (MapInfo); - *NumberOfBytes = 0; - return Status; - } - - // - // If this is a read operation from the Bus Master's point of view, - // then copy the contents of the real buffer into the mapped buffer - // so the Bus Master can read the contents of the real buffer. - // - if (Operation == EfiPciOperationBusMasterRead || - Operation == EfiPciOperationBusMasterRead64) { - CopyMem ( - (VOID *)(UINTN)MapInfo->MappedHostAddress, - (VOID *)(UINTN)MapInfo->HostAddress, - MapInfo->NumberOfBytes - ); - } - - // - // The DeviceAddress is the address of the maped buffer below 4GB - // - *DeviceAddress = MapInfo->MappedHostAddress; - } else { - // - // The transfer is below 4GB, so the DeviceAddress is simply the - // HostAddress - // - *DeviceAddress = PhysicalAddress; - } - - return EFI_SUCCESS; -} - -/** - Completes the Map() operation and releases any corresponding resources. - - The Unmap() function completes the Map() operation and releases any - corresponding resources. - If the operation was an EfiPciOperationBusMasterWrite or - EfiPciOperationBusMasterWrite64, the data is committed to the target system - memory. - Any resources used for the mapping are freed. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] Mapping The mapping value returned from Map(). - - @retval EFI_SUCCESS The range was unmapped. - - @retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by - Map(). - - @retval EFI_DEVICE_ERROR The data was not committed to the target - system memory. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoUnmap ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN VOID *Mapping - ) -{ - MAP_INFO *MapInfo; - - // - // See if the Map() operation associated with this Unmap() required a mapping - // buffer. If a mapping buffer was not required, then this function simply - // returns EFI_SUCCESS. - // - if (Mapping != NULL) { - // - // Get the MAP_INFO structure from Mapping - // - MapInfo = (MAP_INFO *)Mapping; - - // - // If this is a write operation from the Bus Master's point of view, - // then copy the contents of the mapped buffer into the real buffer - // so the processor can read the contents of the real buffer. - // - if (MapInfo->Operation == EfiPciOperationBusMasterWrite || - MapInfo->Operation == EfiPciOperationBusMasterWrite64) { - CopyMem ( - (VOID *)(UINTN)MapInfo->HostAddress, - (VOID *)(UINTN)MapInfo->MappedHostAddress, - MapInfo->NumberOfBytes - ); - } - - // - // Free the mapped buffer and the MAP_INFO structure. - // - gBS->FreePages (MapInfo->MappedHostAddress, MapInfo->NumberOfPages); - gBS->FreePool (Mapping); - } - return EFI_SUCCESS; -} - -/** - Allocates pages that are suitable for an EfiPciOperationBusMasterCommonBuffer - or EfiPciOperationBusMasterCommonBuffer64 mapping. - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param Type This parameter is not used and must be ignored. - - @param MemoryType The type of memory to allocate, EfiBootServicesData or - EfiRuntimeServicesData. - - @param Pages The number of pages to allocate. - - @param HostAddress A pointer to store the base system memory address of the - allocated range. - - @param Attributes The requested bit mask of attributes for the allocated - range. Only the attributes - EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE, - EFI_PCI_ATTRIBUTE_MEMORY_CACHED, and - EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE may be used with this - function. - - @retval EFI_SUCCESS The requested memory pages were allocated. - - @retval EFI_INVALID_PARAMETER MemoryType is invalid. - - @retval EFI_INVALID_PARAMETER HostAddress is NULL. - - @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal - attribute bits are MEMORY_WRITE_COMBINE, - MEMORY_CACHED, and DUAL_ADDRESS_CYCLE. - - @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoAllocateBuffer ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_ALLOCATE_TYPE Type, - IN EFI_MEMORY_TYPE MemoryType, - IN UINTN Pages, - OUT VOID **HostAddress, - IN UINT64 Attributes - ) -{ - EFI_STATUS Status; - EFI_PHYSICAL_ADDRESS PhysicalAddress; - - // - // Validate Attributes - // - if ((Attributes & EFI_PCI_ATTRIBUTE_INVALID_FOR_ALLOCATE_BUFFER) != 0) { - return EFI_UNSUPPORTED; - } - - // - // Check for invalid inputs - // - if (HostAddress == NULL) { - return EFI_INVALID_PARAMETER; - } - - // - // The only valid memory types are EfiBootServicesData and - // EfiRuntimeServicesData - // - if (MemoryType != EfiBootServicesData && - MemoryType != EfiRuntimeServicesData) { - return EFI_INVALID_PARAMETER; - } - - // - // Limit allocations to memory below 4GB - // - PhysicalAddress = (EFI_PHYSICAL_ADDRESS)(0xffffffff); - - Status = gBS->AllocatePages (AllocateMaxAddress, MemoryType, Pages, - &PhysicalAddress); - if (EFI_ERROR (Status)) { - return Status; - } - - *HostAddress = (VOID *)(UINTN)PhysicalAddress; - - return EFI_SUCCESS; -} - -/** - Frees memory that was allocated with AllocateBuffer(). - - The FreeBuffer() function frees memory that was allocated with - AllocateBuffer(). - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param Pages The number of pages to free. - - @param HostAddress The base system memory address of the allocated range. - - @retval EFI_SUCCESS The requested memory pages were freed. - - @retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and - Pages was not allocated with AllocateBuffer(). -**/ -EFI_STATUS -EFIAPI -RootBridgeIoFreeBuffer ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN UINTN Pages, - OUT VOID *HostAddress - ) -{ - return gBS->FreePages ((EFI_PHYSICAL_ADDRESS) (UINTN) HostAddress, Pages); -} - -/** - Flushes all PCI posted write transactions from a PCI host bridge to system - memory. - - The Flush() function flushes any PCI posted write transactions from a PCI - host bridge to system memory. Posted write transactions are generated by PCI - bus masters when they perform write transactions to target addresses in - system memory. - This function does not flush posted write transactions from any PCI bridges. - A PCI controller specific action must be taken to guarantee that the posted - write transactions have been flushed from the PCI controller and from all the - PCI bridges into the PCI host bridge. This is typically done with a PCI read - transaction from the PCI controller prior to calling Flush(). - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @retval EFI_SUCCESS The PCI posted write transactions were flushed - from the PCI host bridge to system memory. - - @retval EFI_DEVICE_ERROR The PCI posted write transactions were not flushed - from the PCI host bridge due to a hardware error. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoFlush ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This - ) -{ - // - // not supported yet - // - return EFI_SUCCESS; -} - -/** - Gets the attributes that a PCI root bridge supports setting with - SetAttributes(), and the attributes that a PCI root bridge is currently - using. - - The GetAttributes() function returns the mask of attributes that this PCI - root bridge supports and the mask of attributes that the PCI root bridge is - currently using. - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param Supported A pointer to the mask of attributes that this PCI root - bridge supports setting with SetAttributes(). - - @param Attributes A pointer to the mask of attributes that this PCI root - bridge is currently using. - - @retval EFI_SUCCESS If Supports is not NULL, then the attributes - that the PCI root bridge supports is returned - in Supports. If Attributes is not NULL, then - the attributes that the PCI root bridge is - currently using is returned in Attributes. - - @retval EFI_INVALID_PARAMETER Both Supports and Attributes are NULL. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoGetAttributes ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - OUT UINT64 *Supported, - OUT UINT64 *Attributes - ) -{ - PCI_ROOT_BRIDGE_INSTANCE *PrivateData; - - PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(This); - - if (Attributes == NULL && Supported == NULL) { - return EFI_INVALID_PARAMETER; - } - - // - // Set the return value for Supported and Attributes - // - if (Supported != NULL) { - *Supported = PrivateData->Supports; - } - - if (Attributes != NULL) { - *Attributes = PrivateData->Attributes; - } - - return EFI_SUCCESS; -} - -/** - Sets attributes for a resource range on a PCI root bridge. - - The SetAttributes() function sets the attributes specified in Attributes for - the PCI root bridge on the resource range specified by ResourceBase and - ResourceLength. Since the granularity of setting these attributes may vary - from resource type to resource type, and from platform to platform, the - actual resource range and the one passed in by the caller may differ. As a - result, this function may set the attributes specified by Attributes on a - larger resource range than the caller requested. The actual range is returned - in ResourceBase and ResourceLength. The caller is responsible for verifying - that the actual range for which the attributes were set is acceptable. - - @param[in] This A pointer to the - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[in] Attributes The mask of attributes to set. If the - attribute bit MEMORY_WRITE_COMBINE, - MEMORY_CACHED, or MEMORY_DISABLE is set, - then the resource range is specified by - ResourceBase and ResourceLength. If - MEMORY_WRITE_COMBINE, MEMORY_CACHED, and - MEMORY_DISABLE are not set, then - ResourceBase and ResourceLength are ignored, - and may be NULL. - - @param[in, out] ResourceBase A pointer to the base address of the - resource range to be modified by the - attributes specified by Attributes. - - @param[in, out] ResourceLength A pointer to the length of the resource - range to be modified by the attributes - specified by Attributes. - - @retval EFI_SUCCESS The current configuration of this PCI root bridge - was returned in Resources. - - @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge - could not be retrieved. - - @retval EFI_INVALID_PARAMETER Invalid pointer of - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL -**/ -EFI_STATUS -EFIAPI -RootBridgeIoSetAttributes ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN UINT64 Attributes, - IN OUT UINT64 *ResourceBase, - IN OUT UINT64 *ResourceLength - ) -{ - PCI_ROOT_BRIDGE_INSTANCE *PrivateData; - - PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(This); - - if (Attributes != 0) { - if ((Attributes & (~(PrivateData->Supports))) != 0) { - return EFI_UNSUPPORTED; - } - } - - // - // This is a generic driver for a PC-AT class system. It does not have any - // chipset specific knowlegde, so none of the attributes can be set or - // cleared. Any attempt to set attribute that are already set will succeed, - // and any attempt to set an attribute that is not supported will fail. - // - if (Attributes & (~PrivateData->Attributes)) { - return EFI_UNSUPPORTED; - } - - return EFI_SUCCESS; -} - -/** - Retrieves the current resource settings of this PCI root bridge in the form - of a set of ACPI 2.0 resource descriptors. - - There are only two resource descriptor types from the ACPI Specification that - may be used to describe the current resources allocated to a PCI root bridge. - These are the QWORD Address Space Descriptor (ACPI 2.0 Section 6.4.3.5.1), - and the End Tag (ACPI 2.0 Section 6.4.2.8). The QWORD Address Space - Descriptor can describe memory, I/O, and bus number ranges for dynamic or - fixed resources. The configuration of a PCI root bridge is described with one - or more QWORD Address Space Descriptors followed by an End Tag. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @param[out] Resources A pointer to the ACPI 2.0 resource descriptors that - describe the current configuration of this PCI root - bridge. The storage for the ACPI 2.0 resource - descriptors is allocated by this function. The - caller must treat the return buffer as read-only - data, and the buffer must not be freed by the - caller. - - @retval EFI_SUCCESS The current configuration of this PCI root bridge - was returned in Resources. - - @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge - could not be retrieved. - - @retval EFI_INVALID_PARAMETER Invalid pointer of - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL -**/ -EFI_STATUS -EFIAPI -RootBridgeIoConfiguration ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - OUT VOID **Resources - ) -{ - PCI_ROOT_BRIDGE_INSTANCE *PrivateData; - UINTN Index; - - PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This); - CopyMem (&PrivateData->ConfigBuffer, &mConfigurationTemplate, - sizeof mConfigurationTemplate); - - for (Index = 0; Index < TypeMax; Index++) { - if (PrivateData->ResAllocNode[Index].Status == ResAllocated) { - EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Desc; - - Desc = &PrivateData->ConfigBuffer.SpaceDesc[Index]; - Desc->AddrRangeMin = PrivateData->ResAllocNode[Index].Base; - Desc->AddrRangeMax = PrivateData->ResAllocNode[Index].Base + - PrivateData->ResAllocNode[Index].Length - 1; - Desc->AddrLen = PrivateData->ResAllocNode[Index].Length; - } - } - - *Resources = &PrivateData->ConfigBuffer; - return EFI_SUCCESS; -} - diff --git a/OvmfPkg/PciHostBridgeDxe/Ia32/IoFifo.nasm b/OvmfPkg/PciHostBridgeDxe/Ia32/IoFifo.nasm deleted file mode 100644 index daa90a99af37..000000000000 --- a/OvmfPkg/PciHostBridgeDxe/Ia32/IoFifo.nasm +++ /dev/null @@ -1,136 +0,0 @@ -;------------------------------------------------------------------------------ -; -; Copyright (c) 2006 - 2012, Intel Corporation. All rights reserved.
-; -; This program and the accompanying materials are licensed and made available -; under the terms and conditions of the BSD License which accompanies this -; distribution. The full text of the license may be found at -; http://opensource.org/licenses/bsd-license.php. -; -; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -; -;------------------------------------------------------------------------------ - - SECTION .text - -;------------------------------------------------------------------------------ -; VOID -; EFIAPI -; IoReadFifo8 ( -; IN UINTN Port, -; IN UINTN Size, -; IN VOID *Buffer -; ); -;------------------------------------------------------------------------------ -global ASM_PFX(IoReadFifo8) -ASM_PFX(IoReadFifo8): - push edi - cld - mov dx, [esp + 8] - mov ecx, [esp + 12] - mov edi, [esp + 16] -rep insb - pop edi - ret - -;------------------------------------------------------------------------------ -; VOID -; EFIAPI -; IoReadFifo16 ( -; IN UINTN Port, -; IN UINTN Size, -; IN VOID *Buffer -; ); -;------------------------------------------------------------------------------ -global ASM_PFX(IoReadFifo16) -ASM_PFX(IoReadFifo16): - push edi - cld - mov dx, [esp + 8] - mov ecx, [esp + 12] - mov edi, [esp + 16] -rep insw - pop edi - ret - -;------------------------------------------------------------------------------ -; VOID -; EFIAPI -; IoReadFifo32 ( -; IN UINTN Port, -; IN UINTN Size, -; IN VOID *Buffer -; ); -;------------------------------------------------------------------------------ -global ASM_PFX(IoReadFifo32) -ASM_PFX(IoReadFifo32): - push edi - cld - mov dx, [esp + 8] - mov ecx, [esp + 12] - mov edi, [esp + 16] -rep insd - pop edi - ret - -;------------------------------------------------------------------------------ -; VOID -; EFIAPI -; IoWriteFifo8 ( -; IN UINTN Port, -; IN UINTN Size, -; IN VOID *Buffer -; ); -;------------------------------------------------------------------------------ -global ASM_PFX(IoWriteFifo8) -ASM_PFX(IoWriteFifo8): - push esi - cld - mov dx, [esp + 8] - mov ecx, [esp + 12] - mov esi, [esp + 16] -rep outsb - pop esi - ret - -;------------------------------------------------------------------------------ -; VOID -; EFIAPI -; IoWriteFifo16 ( -; IN UINTN Port, -; IN UINTN Size, -; IN VOID *Buffer -; ); -;------------------------------------------------------------------------------ -global ASM_PFX(IoWriteFifo16) -ASM_PFX(IoWriteFifo16): - push esi - cld - mov dx, [esp + 8] - mov ecx, [esp + 12] - mov esi, [esp + 16] -rep outsw - pop esi - ret - -;------------------------------------------------------------------------------ -; VOID -; EFIAPI -; IoWriteFifo32 ( -; IN UINTN Port, -; IN UINTN Size, -; IN VOID *Buffer -; ); -;------------------------------------------------------------------------------ -global ASM_PFX(IoWriteFifo32) -ASM_PFX(IoWriteFifo32): - push esi - cld - mov dx, [esp + 8] - mov ecx, [esp + 12] - mov esi, [esp + 16] -rep outsd - pop esi - ret - diff --git a/OvmfPkg/PciHostBridgeDxe/X64/IoFifo.nasm b/OvmfPkg/PciHostBridgeDxe/X64/IoFifo.nasm deleted file mode 100644 index bb3d1da67af5..000000000000 --- a/OvmfPkg/PciHostBridgeDxe/X64/IoFifo.nasm +++ /dev/null @@ -1,125 +0,0 @@ -;------------------------------------------------------------------------------ -; -; Copyright (c) 2006 - 2012, Intel Corporation. All rights reserved.
-; -; This program and the accompanying materials are licensed and made available -; under the terms and conditions of the BSD License which accompanies this -; distribution. The full text of the license may be found at -; http://opensource.org/licenses/bsd-license.php. -; -; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -; -;------------------------------------------------------------------------------ - - DEFAULT REL - SECTION .text - -;------------------------------------------------------------------------------ -; VOID -; EFIAPI -; IoReadFifo8 ( -; IN UINTN Port, // rcx -; IN UINTN Size, // rdx -; IN VOID *Buffer // r8 -; ); -;------------------------------------------------------------------------------ -global ASM_PFX(IoReadFifo8) -ASM_PFX(IoReadFifo8): - cld - xchg rcx, rdx - xchg rdi, r8 ; rdi: buffer address; r8: save rdi -rep insb - mov rdi, r8 ; restore rdi - ret - -;------------------------------------------------------------------------------ -; VOID -; EFIAPI -; IoReadFifo16 ( -; IN UINTN Port, // rcx -; IN UINTN Size, // rdx -; IN VOID *Buffer // r8 -; ); -;------------------------------------------------------------------------------ -global ASM_PFX(IoReadFifo16) -ASM_PFX(IoReadFifo16): - cld - xchg rcx, rdx - xchg rdi, r8 ; rdi: buffer address; r8: save rdi -rep insw - mov rdi, r8 ; restore rdi - ret - -;------------------------------------------------------------------------------ -; VOID -; EFIAPI -; IoReadFifo32 ( -; IN UINTN Port, // rcx -; IN UINTN Size, // rdx -; IN VOID *Buffer // r8 -; ); -;------------------------------------------------------------------------------ -global ASM_PFX(IoReadFifo32) -ASM_PFX(IoReadFifo32): - cld - xchg rcx, rdx - xchg rdi, r8 ; rdi: buffer address; r8: save rdi -rep insd - mov rdi, r8 ; restore rdi - ret - -;------------------------------------------------------------------------------ -; VOID -; EFIAPI -; IoWriteFifo8 ( -; IN UINTN Port, // rcx -; IN UINTN Size, // rdx -; IN VOID *Buffer // r8 -; ); -;------------------------------------------------------------------------------ -global ASM_PFX(IoWriteFifo8) -ASM_PFX(IoWriteFifo8): - cld - xchg rcx, rdx - xchg rsi, r8 ; rsi: buffer address; r8: save rsi -rep outsb - mov rsi, r8 ; restore rsi - ret - -;------------------------------------------------------------------------------ -; VOID -; EFIAPI -; IoWriteFifo16 ( -; IN UINTN Port, // rcx -; IN UINTN Size, // rdx -; IN VOID *Buffer // r8 -; ); -;------------------------------------------------------------------------------ -global ASM_PFX(IoWriteFifo16) -ASM_PFX(IoWriteFifo16): - cld - xchg rcx, rdx - xchg rsi, r8 ; rsi: buffer address; r8: save rsi -rep outsw - mov rsi, r8 ; restore rsi - ret - -;------------------------------------------------------------------------------ -; VOID -; EFIAPI -; IoWriteFifo32 ( -; IN UINTN Port, // rcx -; IN UINTN Size, // rdx -; IN VOID *Buffer // r8 -; ); -;------------------------------------------------------------------------------ -global ASM_PFX(IoWriteFifo32) -ASM_PFX(IoWriteFifo32): - cld - xchg rcx, rdx - xchg rsi, r8 ; rsi: buffer address; r8: save rsi -rep outsd - mov rsi, r8 ; restore rsi - ret -