From patchwork Sat Jun 26 04:11:05 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Maciej W. Rozycki" X-Patchwork-Id: 467984 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-20.2 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI, MENTIONS_GIT_HOSTING, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED, USER_AGENT_SANE_1 autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 2552AC49EAB for ; Sat, 26 Jun 2021 04:11:12 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 0BDFA6196E for ; Sat, 26 Jun 2021 04:11:12 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230040AbhFZENa (ORCPT ); Sat, 26 Jun 2021 00:13:30 -0400 Received: from angie.orcam.me.uk ([78.133.224.34]:60034 "EHLO angie.orcam.me.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230032AbhFZEN2 (ORCPT ); Sat, 26 Jun 2021 00:13:28 -0400 Received: by angie.orcam.me.uk (Postfix, from userid 500) id D6E9A92009D; Sat, 26 Jun 2021 06:11:05 +0200 (CEST) Received: from localhost (localhost [127.0.0.1]) by angie.orcam.me.uk (Postfix) with ESMTP id D0E1592009B; Sat, 26 Jun 2021 06:11:05 +0200 (CEST) Date: Sat, 26 Jun 2021 06:11:05 +0200 (CEST) From: "Maciej W. Rozycki" To: Greg Kroah-Hartman , Jiri Slaby , Thomas Bogendoerfer cc: linux-serial@vger.kernel.org, linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org, stable@vger.kernel.org Subject: [PATCH v2 1/2] serial: 8250: Mask out floating 16/32-bit bus bits In-Reply-To: Message-ID: References: User-Agent: Alpine 2.21 (DEB 202 2017-01-01) MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: stable@vger.kernel.org Make sure only actual 8 bits of the IIR register are used in determining the port type in `autoconfig'. The `serial_in' port accessor returns the `unsigned int' type, meaning that with UPIO_AU, UPIO_MEM16, UPIO_MEM32, and UPIO_MEM32BE access types more than 8 bits of data are returned, of which the high order bits will often come from bus lines that are left floating in the data phase. For example with the MIPS Malta board's CBUS UART, where the registers are aligned on 8-byte boundaries and which uses 32-bit accesses, data as follows is returned: YAMON> dump -32 0xbf000900 0x40 BF000900: 1F000942 1F000942 1F000900 1F000900 ...B...B........ BF000910: 1F000901 1F000901 1F000900 1F000900 ................ BF000920: 1F000900 1F000900 1F000960 1F000960 ...........`...` BF000930: 1F000900 1F000900 1F0009FF 1F0009FF ................ YAMON> Evidently high-order 24 bits return values previously driven in the address phase (the 3 highest order address bits used with the command above are masked out in the simple virtual address mapping used here and come out at zeros on the external bus), a common scenario with bus lines left floating, due to bus capacitance. Consequently when the value of IIR, mapped at 0x1f000910, is retrieved in `autoconfig', it comes out at 0x1f0009c1 and when it is right-shifted by 6 and then assigned to 8-bit `scratch' variable, the value calculated is 0x27, not one of 0, 1, 2, 3 expected in port type determination. Fix the issue then, by assigning the value returned from `serial_in' to `scratch' first, which masks out 24 high-order bits retrieved, and only then right-shift the resulting 8-bit data quantity, producing the value of 3 in this case, as expected. Fix the same issue in `serial_dl_read'. The problem first appeared with Linux 2.6.9-rc3 which predates our repo history, but the origin could be identified with the old MIPS/Linux repo also at: as commit e0d2356c0777 ("Merge with Linux 2.6.9-rc3."), where code in `serial_in' was updated with this case: + case UPIO_MEM32: + return readl(up->port.membase + offset); + which made it produce results outside the unsigned 8-bit range for the first time, though obviously it is system dependent what actual values appear in the high order bits retrieved and it may well have been zeros in the relevant positions with the system the change originally was intended for. It is at that point that code in `autoconf' should have been updated accordingly, but clearly it was overlooked. Signed-off-by: Maciej W. Rozycki Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ --- Changes from v1: - Comments added as to truncation of bits above 7 required. --- drivers/tty/serial/8250/8250_port.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) linux-serial-8250-floating-bus-mask.diff Index: linux-macro-ide-tty/drivers/tty/serial/8250/8250_port.c =================================================================== --- linux-macro-ide-tty.orig/drivers/tty/serial/8250/8250_port.c +++ linux-macro-ide-tty/drivers/tty/serial/8250/8250_port.c @@ -311,7 +311,11 @@ static const struct serial8250_config ua /* Uart divisor latch read */ static int default_serial_dl_read(struct uart_8250_port *up) { - return serial_in(up, UART_DLL) | serial_in(up, UART_DLM) << 8; + /* Assign these in pieces to truncate any bits above 7. */ + unsigned char dll = serial_in(up, UART_DLL); + unsigned char dlm = serial_in(up, UART_DLM); + + return dll | dlm << 8; } /* Uart divisor latch write */ @@ -1297,9 +1301,11 @@ static void autoconfig(struct uart_8250_ serial_out(up, UART_LCR, 0); serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); - scratch = serial_in(up, UART_IIR) >> 6; - switch (scratch) { + /* Assign this as it is to truncate any bits above 7. */ + scratch = serial_in(up, UART_IIR); + + switch (scratch >> 6) { case 0: autoconfig_8250(up); break; From patchwork Sat Jun 26 04:11:13 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: "Maciej W. Rozycki" X-Patchwork-Id: 467786 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-15.2 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED, USER_AGENT_SANE_1 autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 2BA49C49EA6 for ; Sat, 26 Jun 2021 04:11:20 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 0B60061987 for ; Sat, 26 Jun 2021 04:11:20 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230107AbhFZENj (ORCPT ); Sat, 26 Jun 2021 00:13:39 -0400 Received: from angie.orcam.me.uk ([78.133.224.34]:60044 "EHLO angie.orcam.me.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230088AbhFZENh (ORCPT ); Sat, 26 Jun 2021 00:13:37 -0400 Received: by angie.orcam.me.uk (Postfix, from userid 500) id 3F9D29200BF; Sat, 26 Jun 2021 06:11:13 +0200 (CEST) Received: from localhost (localhost [127.0.0.1]) by angie.orcam.me.uk (Postfix) with ESMTP id 3C9289200BC; Sat, 26 Jun 2021 06:11:13 +0200 (CEST) Date: Sat, 26 Jun 2021 06:11:13 +0200 (CEST) From: "Maciej W. Rozycki" To: Greg Kroah-Hartman , Jiri Slaby , Thomas Bogendoerfer cc: linux-serial@vger.kernel.org, linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org, stable@vger.kernel.org Subject: [PATCH v2 2/2] MIPS: Malta: Do not byte-swap accesses to the CBUS UART In-Reply-To: Message-ID: References: User-Agent: Alpine 2.21 (DEB 202 2017-01-01) MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: stable@vger.kernel.org Correct big-endian accesses to the CBUS UART, a Malta on-board discrete TI16C550C part wired directly to the system controller's device bus, and do not use byte swapping with the 32-bit accesses to the device. The CBUS is used for devices such as the boot flash memory needed early on in system bootstrap even before PCI has been initialised. Therefore it uses the system controller's device bus, which follows the endianness set with the CPU, which means no byte-swapping is ever required for data accesses to CBUS, unlike with PCI. The CBUS UART uses the UPIO_MEM32 access method, that is the `readl' and `writel' MMIO accessors, which on the MIPS platform imply byte-swapping with PCI systems. Consequently the wrong byte lane is accessed with the big-endian configuration and the UART is not correctly accessed. As it happens the UPIO_MEM32BE access method makes use of the `ioread32' and `iowrite32' MMIO accessors, which still use `readl' and `writel' respectively, however they byte-swap data passed, effectively cancelling swapping done with the accessors themselves and making it suitable for the CBUS UART. Make the CBUS UART switch between UPIO_MEM32 and UPIO_MEM32BE then, based on the endianness selected. With this change in place the device is correctly recognised with big-endian Malta at boot, along with the Super I/O devices behind PCI: Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled printk: console [ttyS0] disabled serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A printk: console [ttyS0] enabled printk: bootconsole [uart8250] disabled serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A serial8250.0: ttyS2 at MMIO 0x1f000900 (irq = 20, base_baud = 230400) is a 16550A Signed-off-by: Maciej W. Rozycki Fixes: e7c4782f92fc ("[MIPS] Put an end to 's long and annyoing existence") Cc: stable@vger.kernel.org # v2.6.23+ Reviewed-by: Philippe Mathieu-Daudé --- Changes from v1: - Remove console message duplicates from the commit description. --- arch/mips/mti-malta/malta-platform.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) linux-mips-malta-cbus-uart-be.diff Index: linux-macro-ide-tty/arch/mips/mti-malta/malta-platform.c =================================================================== --- linux-macro-ide-tty.orig/arch/mips/mti-malta/malta-platform.c +++ linux-macro-ide-tty/arch/mips/mti-malta/malta-platform.c @@ -48,7 +48,8 @@ static struct plat_serial8250_port uart8 .mapbase = 0x1f000900, /* The CBUS UART */ .irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_MB2, .uartclk = 3686400, /* Twice the usual clk! */ - .iotype = UPIO_MEM32, + .iotype = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) ? + UPIO_MEM32BE : UPIO_MEM32, .flags = CBUS_UART_FLAGS, .regshift = 3, },