From patchwork Wed Sep 15 08:57:13 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Viacheslav X-Patchwork-Id: 512413 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-15.7 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_CR_TRAILER, INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id F14F3C433EF for ; Wed, 15 Sep 2021 08:57:57 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id D97A060527 for ; Wed, 15 Sep 2021 08:57:57 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S237034AbhIOI7N (ORCPT ); Wed, 15 Sep 2021 04:59:13 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:39674 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236985AbhIOI7M (ORCPT ); Wed, 15 Sep 2021 04:59:12 -0400 Received: from mx.msync.work (mx.msync.work [IPv6:2a01:4f9:2b:2dc2::3]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 2FB1EC061574; Wed, 15 Sep 2021 01:57:54 -0700 (PDT) Received: from [127.0.0.1] (localhost [127.0.0.1]) by localhost (Mailerdaemon) with ESMTPSA id 070AAF6277; Wed, 15 Sep 2021 08:57:50 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=lexina.in; s=dkim; t=1631696271; h=from:subject:date:message-id:to:cc:mime-version: content-transfer-encoding:in-reply-to:references; bh=kWatsbnRYouuldwb6lqvB/sV7amJutWYUknSlMpmpCc=; b=mMzsuhkbOBmY8ySi9D7vdBdrV/XlE05ki6tDf0/MD/1O8kC42f1GlRt+5bWmHrHw6I2Khx 06CUhWpQRRYrQBvNjH/FXGvQess/Y8Sx8yQAFVIVJW18BlDvSvRyV3qrST5gemc46QLa4c BBebpe7mEBCnVgrphjLGXO6fKiE+U68tmqEl4Tlc7NRDb/mv50ModvNEVwIUA6o4IpwA4p jSpGXv3K+tSgIivTUM/9FHilJlcsvYNT+YOGjIiVg7yjKGhz+MeF0z2XvDuO6ONbodnEvp OLL0DHHOuStE81b90ADZvUFKL7190m/Hfe6R4hnDYdnoJb+PKQp8KhRs0mXY2A== From: Vyacheslav Bocharov To: Neil Armstrong , Kevin Hilman Cc: linux-amlogic@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Rob Herring Subject: [PATCH v5 1/4] dt-bindings: arm: amlogic: add bindings for Jethub D1/H1 Date: Wed, 15 Sep 2021 11:57:13 +0300 Message-Id: <20210915085715.1134940-2-adeep@lexina.in> In-Reply-To: <20210915085715.1134940-1-adeep@lexina.in> References: <20210915085715.1134940-1-adeep@lexina.in> MIME-Version: 1.0 X-Last-TLS-Session-Version: TLSv1.3 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org JetHome is a series of home automation controllers: - Jethub D1 based on Amlogic A113X - Jethub H1 based on AmLogic S905W Signed-off-by: Vyacheslav Bocharov Acked-by: Rob Herring --- Documentation/devicetree/bindings/arm/amlogic.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 6423377710ee..b223d7829c3d 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -86,6 +86,7 @@ properties: - enum: - amlogic,p281 - oranth,tx3-mini + - jethome,jethub-j80 - const: amlogic,s905w - const: amlogic,meson-gxl @@ -133,6 +134,7 @@ properties: items: - enum: - amlogic,s400 + - jethome,jethub-j100 - const: amlogic,a113d - const: amlogic,meson-axg From patchwork Wed Sep 15 08:57:15 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Viacheslav X-Patchwork-Id: 513270 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-15.7 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_CR_TRAILER, INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id EA222C433F5 for ; Wed, 15 Sep 2021 08:58:05 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id D494861178 for ; Wed, 15 Sep 2021 08:58:05 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236933AbhIOI7X (ORCPT ); Wed, 15 Sep 2021 04:59:23 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:39726 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236985AbhIOI7W (ORCPT ); Wed, 15 Sep 2021 04:59:22 -0400 Received: from mx.msync.work (mx.msync.work [IPv6:2a01:4f9:2b:2dc2::3]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B1CD7C061574; Wed, 15 Sep 2021 01:58:03 -0700 (PDT) Received: from [127.0.0.1] (localhost [127.0.0.1]) by localhost (Mailerdaemon) with ESMTPSA id ACE13F6294; Wed, 15 Sep 2021 08:58:00 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=lexina.in; s=dkim; t=1631696282; h=from:subject:date:message-id:to:cc:mime-version: content-transfer-encoding:in-reply-to:references; bh=riBzg7yfs/WKceqbRh7CnMdVZOOQ2QoEgRJlHcvkjSY=; b=JgTVbSVFBu4BpdB/IflXWld7UiT+Wnm2siehcXJ55MMksHUXAYJcedxSsrhJfo2RyQ1f4Y Hl0Jxl6juv5JKZQtvtZoSQxBc8gr3Q3MxYxkb4f1gfQSwaPYg5pDLsWjhl15J861+X8e9I qsjqlwsgxoHH0muFS2gDNW6H2aLZvmIcybb6gnSAMh7HgLhYICCG2YKhO5XQ7VlG1ZqLle J4IiWHKM0RnmGFkGf8JCjPmp0Pr42hvmQBKufkB5WP8riZ646uyEoxkMLhZszZq7LAKEJ0 BoKM7w4kb3FB0ZQJ0QAom8kGQkVEP8UnKKrwQmGyI0hWBg75nMHgGMEs3T6pHg== From: Vyacheslav Bocharov To: Neil Armstrong , Kevin Hilman , Rob Herring , Krzysztof Kozlowski , Shawn Guo , Oleksij Rempel , Sam Ravnborg Cc: linux-amlogic@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org Subject: [PATCH v5 2/4] dt-bindings: vendor-prefixes: add jethome prefix Date: Wed, 15 Sep 2021 11:57:15 +0300 Message-Id: <20210915085715.1134940-3-adeep@lexina.in> In-Reply-To: <20210915085715.1134940-1-adeep@lexina.in> References: <20210915085715.1134940-1-adeep@lexina.in> MIME-Version: 1.0 X-Last-TLS-Session-Version: TLSv1.3 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org JetHome is trademark of IP Sokolov P.A., manufacturer of home automation devices. Signed-off-by: Vyacheslav Bocharov --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index a867f7102c35..c52f0d3261bb 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -577,6 +577,8 @@ patternProperties: description: JEDEC Solid State Technology Association "^jesurun,.*": description: Shenzhen Jesurun Electronics Business Dept. + "^jethome,.*": + description: JetHome (IP Sokolov P.A.) "^jianda,.*": description: Jiandangjing Technology Co., Ltd. "^kam,.*": From patchwork Wed Sep 15 08:57:17 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Viacheslav X-Patchwork-Id: 512412 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-15.7 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_CR_TRAILER, INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 0371AC433EF for ; Wed, 15 Sep 2021 08:58:19 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id DA32961185 for ; Wed, 15 Sep 2021 08:58:18 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S237111AbhIOI7f (ORCPT ); Wed, 15 Sep 2021 04:59:35 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:39784 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S237125AbhIOI7d (ORCPT ); Wed, 15 Sep 2021 04:59:33 -0400 Received: from mx.msync.work (mx.msync.work [IPv6:2a01:4f9:2b:2dc2::3]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 79DFBC061574; Wed, 15 Sep 2021 01:58:14 -0700 (PDT) Received: from [127.0.0.1] (localhost [127.0.0.1]) by localhost (Mailerdaemon) with ESMTPSA id B3E7BF62AA; Wed, 15 Sep 2021 08:58:11 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=lexina.in; s=dkim; t=1631696292; h=from:subject:date:message-id:to:cc:mime-version: content-transfer-encoding:in-reply-to:references; bh=ptdKconmY8mvdVrtSLJk5+bGA9Dq5lp9zlHM3qI0kZI=; b=LRzciQwgGWb+0Bvnu3eHzPzYpszTR8G64rPOiyiiOKUURCVOD9OZrWLH3hRlP6NQ/epTFv PrPSWsUCgoaDHmymsKbERJjWBoD+BE6u39hK1VjDM5IjYQ1qGqMwyvxa6RUnJBKedscqzS JY6T6LdQX4YmRjcMThlnMpGsj/o+mhDO0ak1PLBfLWyemK0YnMj+DBdwn8kO7S2bsK3zQs nkazeN2smwQ1FwU8dZfqX5uFS9wJi+FojSXVDgdWO/zFBj3TToQWSRJU+pT/T6UWtHFxmk q2yFEvQRfs/w2YD5fjET9hJq+KEoux9CFhMWQ/83Jc37yZAsu0bVLpLVDZF/cg== From: Vyacheslav Bocharov To: Neil Armstrong , Kevin Hilman Cc: linux-amlogic@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org Subject: [PATCH v5 3/4] arm64: dts: meson-gxl: add support for JetHub H1 Date: Wed, 15 Sep 2021 11:57:17 +0300 Message-Id: <20210915085715.1134940-4-adeep@lexina.in> In-Reply-To: <20210915085715.1134940-1-adeep@lexina.in> References: <20210915085715.1134940-1-adeep@lexina.in> MIME-Version: 1.0 X-Last-TLS-Session-Version: TLSv1.3 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation controller with the following features: - square plastic case - Amlogic S905W (ARM Cortex-A53) quad-core up to 1.5GHz - no video out - 1GB LPDDR4 - 8/16GB eMMC flash - 2 x USB 2.0 - 1 x 10/100Mbps ethernet - WiFi / Bluetooth RTL8822CS IEEE 802.11a/b/g/n/ac, Bluetooth 5.0. - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support. - MicroSD 2.x/3.x/4.x DS/HS cards. - 1 x gpio LED - ADC user Button - DC source 5V microUSB Signed-off-by: Vyacheslav Bocharov Reviewed-by: Neil Armstrong --- arch/arm64/boot/dts/amlogic/Makefile | 1 + .../meson-gxl-s905w-jethome-jethub-j80.dts | 241 ++++++++++++++++++ 2 files changed, 242 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index faa0a79a34f5..2c3ce7c401a5 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-jethome-jethub-j80.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts new file mode 100644 index 000000000000..6eafb908695f --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts @@ -0,0 +1,241 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Vyacheslav Bocharov + * Copyright (c) 2020 JetHome + * Author: Aleksandr Kazantsev + * Author: Alexey Shevelkin + * Author: Vyacheslav Bocharov + */ + +/dts-v1/; + +#include "meson-gxl.dtsi" + +/ { + compatible = "jethome,jethub-j80", "amlogic,s905w", "amlogic,meson-gxl"; + model = "JetHome JetHub J80"; + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + reserved-memory { + linux,cma { + size = <0x0 0x1000000>; + }; + }; + + aliases { + serial0 = &uart_AO; /* Console */ + serial1 = &uart_A; /* Bluetooth */ + serial2 = &uart_AO_B; /* Wireless module 1 */ + serial3 = &uart_C; /* Wireless module 2 */ + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; +}; + +&efuse { + bt_mac: bt_mac@6 { + reg = <0x6 0x6>; + }; + + wifi_mac: wifi_mac@C { + reg = <0xc 0x6>; + }; +}; + +&sn { + reg = <0x32 0x20>; +}; + +ð_mac { + reg = <0x0 0x6>; +}; + +&bid { + reg = <0x12 0x20>; +}; + +&usb { + status = "okay"; + dr_mode = "host"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + +/* Wireless SDIO Module */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + + non-removable; + disable-wp; + + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* Console UART */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +/* S905W only has access to its internal PHY */ +ðmac { + status = "okay"; + phy-mode = "rmii"; + phy-handle = <&internal_phy>; +}; + +&internal_phy { + status = "okay"; + pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; + pinctrl-names = "default"; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +&uart_C { + status = "okay"; + pinctrl-0 = <&uart_c_pins>; + pinctrl-names = "default"; +}; + +&uart_AO_B { + status = "okay"; + pinctrl-0 = <&uart_ao_b_pins>, <&uart_ao_b_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +&i2c_B { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_b_pins>; + + pcf8563: pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + status = "okay"; + }; +}; From patchwork Wed Sep 15 08:57:19 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Viacheslav X-Patchwork-Id: 513269 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-15.7 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_CR_TRAILER, INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 80D55C433EF for ; Wed, 15 Sep 2021 08:58:41 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 6874060527 for ; Wed, 15 Sep 2021 08:58:41 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S237140AbhIOI75 (ORCPT ); Wed, 15 Sep 2021 04:59:57 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:39844 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S237145AbhIOI7o (ORCPT ); Wed, 15 Sep 2021 04:59:44 -0400 Received: from mx.msync.work (mx.msync.work [IPv6:2a01:4f9:2b:2dc2::3]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 3BA60C061574; Wed, 15 Sep 2021 01:58:23 -0700 (PDT) Received: from [127.0.0.1] (localhost [127.0.0.1]) by localhost (Mailerdaemon) with ESMTPSA id 6DFE8F62B8; Wed, 15 Sep 2021 08:58:21 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=lexina.in; s=dkim; t=1631696301; h=from:subject:date:message-id:to:cc:mime-version: content-transfer-encoding:in-reply-to:references; bh=5n0R6drbZsDzE00WoiM8YAqFQ9VV6XgrJxBJAv4+pes=; b=Sp7LSGoiMzJahmo9oUFn6UheOC+U+3hwSTPZKhTBichoQalX+j8iF+Xe37bSI9C96KWlGe jDWAe6AQIp9N4J5Xgoh2h0+/YVku7P5aEjd+Hn+jrGk/cA/cYQ5KiXCfHoFQ1ZAQ+aWJg8 u3hjyKvrXAnKFBT1xDjGNtzweSIV+R73IEjzrNVKvxYob791nE8I5MD9eSSnjwuMbpzNkg iSucoV3wFJvfvS5nsV1in9wOL1YmAyrLpxKVj5/zcpI5Kkal5ZjmjM9DwJ72Ju1oHuJmOc p5HGGuSrNAPLgb0CfNU6nSMgjiapwkG59PL6+EOz5lwMXhMp9y7Dplw935eo+A== From: Vyacheslav Bocharov To: Neil Armstrong , Kevin Hilman Cc: linux-amlogic@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org Subject: [PATCH v5 4/4] arm64: dts: meson-axg: add support for JetHub D1 Date: Wed, 15 Sep 2021 11:57:19 +0300 Message-Id: <20210915085715.1134940-5-adeep@lexina.in> In-Reply-To: <20210915085715.1134940-1-adeep@lexina.in> References: <20210915085715.1134940-1-adeep@lexina.in> MIME-Version: 1.0 X-Last-TLS-Session-Version: TLSv1.3 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a home automation controller with the following features: - DIN Rail Mounting - Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz - no video out - 512Mb/1GB LPDDR4 - 8/16GB eMMC flash - 1 x USB 2.0 - 1 x 10/100Mbps ethernet - WiFi / Bluetooth AMPAK AP6255 (Broadcom BCM43455) IEEE 802.11a/b/g/n/ac, Bluetooth 4.2. - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support. - 2 x gpio LEDS - GPIO user Button - 1 x 1-Wire - 2 x RS-485 - 4 x dry contact digital GPIO inputs - 3 x relay GPIO outputs - DC source with a voltage of 9 to 56 V / Passive POE Changes from v4: - add node for 1wire-gpio for JetHub D1 v2 device Signed-off-by: Vyacheslav Bocharov Reviewed-by: Neil Armstrong --- arch/arm64/boot/dts/amlogic/Makefile | 1 + .../amlogic/meson-axg-jethome-jethub-j100.dts | 361 ++++++++++++++++++ 2 files changed, 362 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 2c3ce7c401a5..3ba6f58b9833 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts new file mode 100644 index 000000000000..c25b03a91e12 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts @@ -0,0 +1,361 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2021 Vyacheslav Bocharov + * Copyright (c) 2020 JetHome + * Author: Aleksandr Kazantsev + * Author: Alexey Shevelkin + * Author: Vyacheslav Bocharov + */ + +/dts-v1/; + +#include "meson-axg.dtsi" +#include +#include + +/ { + compatible = "jethome,jethub-j100", "amlogic,a113d", "amlogic,meson-axg"; + model = "JetHome JetHub J100"; + aliases { + serial0 = &uart_AO; /* Console */ + serial1 = &uart_AO_B; /* External UART (Wireless Module) */ + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* 1024MB RAM */ + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + reserved-memory { + linux,cma { + size = <0x0 0x400000>; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_5v>; + regulator-always-on; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + usb_pwr: regulator-usb_pwr { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + regulator-always-on; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&scpi_sensors 0>; + trips { + cpu_passive: cpu-passive { + temperature = <70000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + cpu_hot: cpu-hot { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "hot"; + }; + + cpu_critical: cpu-critical { + temperature = <100000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + }; + + cpu_cooling_maps: cooling-maps { + map0 { + trip = <&cpu_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + onewire { + compatible = "w1-gpio"; + gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>; + #gpio-cells = <1>; + }; +}; + +&efuse { + sn: sn@32 { + reg = <0x32 0x20>; + }; + + eth_mac: eth_mac@0 { + reg = <0x0 0x6>; + }; + + bt_mac: bt_mac@6 { + reg = <0x6 0x6>; + }; + + wifi_mac: wifi_mac@c { + reg = <0xc 0x6>; + }; + + bid: bid@12 { + reg = <0x12 0x20>; + }; +}; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_rmii_x_pins>; + pinctrl-names = "default"; + phy-handle = <ð_phy0>; + phy-mode = "rmii"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + /* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */ + eth_phy0: ethernet-phy@0 { + /* compatible = "ethernet-phy-id0243.0c54";*/ + max-speed = <100>; + reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>; + }; + }; +}; + +/* Internal I2C bus (on CPU module) */ +&i2c1 { + status = "okay"; + pinctrl-0 = <&i2c1_z_pins>; + pinctrl-names = "default"; + + /* RTC */ + pcf8563: pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + status = "okay"; + }; +}; + +/* Peripheral I2C bus (on motherboard) */ +&i2c_AO { + status = "okay"; + pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>; + pinctrl-names = "default"; +}; + +&pwm_ab { + status = "okay"; + pinctrl-0 = <&pwm_a_x20_pins>; + pinctrl-names = "default"; +}; + +/* wifi module */ +&sd_emmc_b { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr104; + max-frequency = <200000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* emmc storage */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* UART Bluetooth */ +&uart_B { + status = "okay"; + pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>; + }; +}; + +/* UART Console */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +/* UART Wireless module */ +&uart_AO_B { + status = "okay"; + pinctrl-0 = <&uart_ao_b_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + phy-supply = <&usb_pwr>; +}; + +&spicc1 { + status = "okay"; + pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>; + pinctrl-names = "default"; +}; + +&gpio { + gpio-line-names = + "", "", "", "", "", // 0 - 4 + "", "", "", "", "", // 5 - 9 + "UserButton", "", "", "", "", // 10 - 14 + "", "", "", "", "", // 15 - 19 + "", "", "", "", "", // 20 - 24 + "", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29 + "Output1", "", "", "", "", // 30 - 34 + "", "ZigBeeBOOT", "", "", "", // 35 - 39 + "1Wire", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44 + "Input2", "Input1", "", "", "", // 45 - 49 + "", "", "", "", "", // 50 - 54 + "", "", "", "", "", // 55 - 59 + "", "", "", "", "", // 60 - 64 + "", "", "", "", "", // 65 - 69 + "", "", "", "", "", // 70 - 74 + "", "", "", "", "", // 75 - 79 + "", "", "", "", "", // 80 - 84 + "", ""; // 85-86 +}; + +&cpu0 { + #cooling-cells = <2>; +}; + +&cpu1 { + #cooling-cells = <2>; +}; + +&cpu2 { + #cooling-cells = <2>; +}; + +&cpu3 { + #cooling-cells = <2>; +};