From patchwork Tue Nov 30 02:22:46 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sam Protsenko X-Patchwork-Id: 517450 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id B7445C433FE for ; Tue, 30 Nov 2021 02:22:57 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S237442AbhK3C0O (ORCPT ); Mon, 29 Nov 2021 21:26:14 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58538 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S237438AbhK3C0O (ORCPT ); Mon, 29 Nov 2021 21:26:14 -0500 Received: from mail-lf1-x130.google.com (mail-lf1-x130.google.com [IPv6:2a00:1450:4864:20::130]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8EFA9C061748 for ; Mon, 29 Nov 2021 18:22:55 -0800 (PST) Received: by mail-lf1-x130.google.com with SMTP id f18so49734938lfv.6 for ; Mon, 29 Nov 2021 18:22:55 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=DYEHlzA1VrNpvRuMbbyAOHVDsMuIQ1cl/rzwkQW1XHM=; b=kWG6d/YEKVy0ZQFanmjZ84CzkosC743/dc3lqH+nDBsAB2hvwNMAl1KIVXsC2S9doX CMSpxUww9c3jEKe/+M89QZtMM3CpKCPh6FgGxxU/3vb/OwRkJGZW4D38SyWvE79oxshU 9wx7ByZBeROaOJ40WikmiQAQMtfdxRHJWdkWdT4A/Hex847HpF4Uth3Elvg0kfmjQuWR ZpIm0D8QdmBUh5E3F6HeSkCKBtApx7+1sttdpDs9WdRNl0I4PUSQA8DicXvCusCH/ifn p0sRRziXWNwOD4UeuEvXI8/BWUbNClq8OTrDQY+4jsX6iTiphXyBgJYVBm/fKmdeHKdZ MLxA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=DYEHlzA1VrNpvRuMbbyAOHVDsMuIQ1cl/rzwkQW1XHM=; b=suiItZpnZBL0ztReQvDqKIfGvCuL6Qzr00GyXGhMCEkYB4UBLLVVQdDpPYHoyyuyqq P3E+QFauWccuGnWepA0w8bMagd03stTqsDrIQhZldRM6wbw4p2SMVEtvk5QtOOon6MDc RlI4aEDbQKe90eRi95Qn6JKZnzc5oLg1T6q1le7SMxCFiaewSnBMZDzL8b84S1CyKxsj PgEHxfkgqNc/0n0beY37DojB6ieLFzRizn5XRycvOrbS9+hTMIEmPVH1HWW8itiMFYM6 0y2TQ13+uP6USqlBfus7NIvnMT24S7vm7FddvhjFC8kmFsGQ0eyWNN/d/caPZFKKPAAH sfWQ== X-Gm-Message-State: AOAM530Ft1hyHdiJpWLx/1BZNk8zgi5txUkEuWCMEPBOEFW4zPzeHyBk bSvuABIaUqhLSpsOpTkuEJKAQg== X-Google-Smtp-Source: ABdhPJxIG40IAHPH8i0k1Mo2rcIfRKc6SZHwzHioud3i38kW70c3c07LFHXozgPujcCFNYVtSsyubw== X-Received: by 2002:ac2:43a6:: with SMTP id t6mr49677286lfl.95.1638238973710; Mon, 29 Nov 2021 18:22:53 -0800 (PST) Received: from localhost ([31.134.121.151]) by smtp.gmail.com with ESMTPSA id l12sm1544858lfe.81.2021.11.29.18.22.52 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 29 Nov 2021 18:22:53 -0800 (PST) From: Sam Protsenko To: Krzysztof Kozlowski , Rob Herring , Greg Kroah-Hartman Cc: Jiri Slaby , Jaewon Kim , Chanho Park , David Virag , Youngmin Nam , devicetree@vger.kernel.org, linux-serial@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org Subject: [PATCH v2 1/5] dt-bindings: soc: samsung: Add Exynos USI bindings Date: Tue, 30 Nov 2021 04:22:46 +0200 Message-Id: <20211130022250.28519-2-semen.protsenko@linaro.org> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20211130022250.28519-1-semen.protsenko@linaro.org> References: <20211130022250.28519-1-semen.protsenko@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-samsung-soc@vger.kernel.org Add constants for choosing USIv2 configuration mode in device tree. Those are further used in USI driver to figure out which value to write into SW_CONF register. Also document USIv2 IP-core bindings. Signed-off-by: Sam Protsenko --- Changes in v2: - Combined dt-bindings doc and dt-bindings header patches - Added i2c node to example in bindings doc - Added mentioning of shared internal circuits - Added USI_V2_NONE value to bindings header .../bindings/soc/samsung/exynos-usi.yaml | 135 ++++++++++++++++++ include/dt-bindings/soc/samsung,exynos-usi.h | 17 +++ 2 files changed, 152 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml create mode 100644 include/dt-bindings/soc/samsung,exynos-usi.h diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml new file mode 100644 index 000000000000..a822bc62b3cd --- /dev/null +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/samsung/exynos-usi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung's Exynos USI (Universal Serial Interface) binding + +maintainers: + - Sam Protsenko + - Krzysztof Kozlowski + +description: | + USI IP-core provides selectable serial protocol (UART, SPI or High-Speed I2C). + USI shares almost all internal circuits within each protocol, so only one + protocol can be chosen at a time. USI is modeled as a node with zero or more + child nodes, each representing a serial sub-node device. The mode setting + selects which particular function will be used. + + Refer to next bindings documentation for information on protocol subnodes that + can exist under USI node: + + [1] Documentation/devicetree/bindings/serial/samsung_uart.yaml + [2] Documentation/devicetree/bindings/i2c/i2c-exynos5.txt + [3] Documentation/devicetree/bindings/spi/spi-samsung.txt + +properties: + $nodename: + pattern: "^usi@[0-9a-f]+$" + + compatible: + const: samsung,exynos-usi-v2 + + reg: + maxItems: 1 + + clocks: + items: + - description: Bus (APB) clock + - description: Operating clock for UART/SPI/I2C protocol + + clock-names: + items: + - const: pclk + - const: ipclk + + ranges: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + samsung,sysreg: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + Should be phandle/offset pair. The phandle to System Register syscon node + (for the same domain where this USI controller resides) and the offset + of SW_CONF register for this USI controller. + + samsung,mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Selects USI function (which serial protocol to use). Refer to + for valid USI mode values. + + samsung,clkreq-on: + type: boolean + description: + Enable this property if underlying protocol requires the clock to be + continuously provided without automatic gating. As suggested by SoC + manual, it should be set in case of SPI/I2C slave, UART Rx and I2C + multi-master mode. Usually this property is needed if USI mode is set + to "UART". + + This property is optional. + +patternProperties: + # All other properties should be child nodes + "^.*@[0-9a-f]+$": + type: object + description: Child node describing underlying USI serial protocol + +required: + - compatible + - reg + - clocks + - clock-names + - ranges + - "#address-cells" + - "#size-cells" + - samsung,sysreg + - samsung,mode + +additionalProperties: false + +examples: + - | + #include + #include + + usi0: usi@138200c0 { + compatible = "samsung,exynos-usi-v2"; + reg = <0x138200c0 0x20>; + samsung,sysreg = <&sysreg_peri 0x1010>; + samsung,mode = ; + samsung,clkreq-on; /* needed for UART mode */ + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peri 32>, <&cmu_peri 31>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_0: serial@13820000 { + compatible = "samsung,exynos850-uart"; + reg = <0x13820000 0xc0>; + interrupts = ; + clocks = <&cmu_peri 32>, <&cmu_peri 31>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + hsi2c_0: i2c@13820000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x13820000 0xc0>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_peri 32>, <&cmu_peri 31>; + clock-names = "hsi2c_pclk", "hsi2c"; + status = "disabled"; + }; + }; diff --git a/include/dt-bindings/soc/samsung,exynos-usi.h b/include/dt-bindings/soc/samsung,exynos-usi.h new file mode 100644 index 000000000000..a01af169d249 --- /dev/null +++ b/include/dt-bindings/soc/samsung,exynos-usi.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2021 Linaro Ltd. + * Author: Sam Protsenko + * + * Device Tree bindings for Samsung Exynos USI (Universal Serial Interface). + */ + +#ifndef __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H +#define __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H + +#define USI_V2_NONE 0 +#define USI_V2_UART 1 +#define USI_V2_SPI 2 +#define USI_V2_I2C 3 + +#endif /* __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H */ From patchwork Tue Nov 30 02:24:50 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sam Protsenko X-Patchwork-Id: 518579 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 36F1CC433F5 for ; Tue, 30 Nov 2021 02:24:58 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233750AbhK3C2P (ORCPT ); Mon, 29 Nov 2021 21:28:15 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59040 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232975AbhK3C2O (ORCPT ); Mon, 29 Nov 2021 21:28:14 -0500 Received: from mail-lj1-x233.google.com (mail-lj1-x233.google.com [IPv6:2a00:1450:4864:20::233]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 389C5C061748 for ; Mon, 29 Nov 2021 18:24:56 -0800 (PST) Received: by mail-lj1-x233.google.com with SMTP id j18so24948112ljc.12 for ; Mon, 29 Nov 2021 18:24:56 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=W/IWZSOaKdk/mOrNyluTxke9aOsIgAwxOopRM0hhknc=; b=maMZCytHKi8n40D+z1hQwsNWujIV+kJeQxpQ7JezI1m0XYg9mEnIWnW4CRstMBl5VP A5tam4etyha6PzkeNAjdWO7qd0tBS6YGh9TZEtqGsWrH78mTpVmweocJ8KhgrEhNj2jg 0+l2gP9epnjbM+Rg+dQqhDUQQrrwTPxGJ8LgEM3Wkn4qn7x4J1exlbzXgdvBurt6KYYy N21T/W8DoxdZmKoO+I4tW2iMEBfQC5JOLRAOFQMbORZe+gGocLpopl479+MzGY6/aGoW 6EwYQ0rGyyD4p52AWxznTDwkJ1UGlV8rZyH6cus+EpVsrSmwxaMmM5JSltDcSskgVAuo 6J+w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=W/IWZSOaKdk/mOrNyluTxke9aOsIgAwxOopRM0hhknc=; b=7L4HUve7EFpZZrkuqj91M0fxnXGFGpA4eK8sa6KgsfGBTOFOtfDY7bywvVr+IcB+Tx Bn+xS6ODbYaimn+oX6we39R0yJfn/l+i9deslzo49dQvZO5TELZ97jCff6x3UesCoHrS hZ3taDVFROiwFdXJ7nslqXUJZwZNKnjbHoWTKDOmrh+kvTVagAYNwKY8ISwvFXj1+gcZ EVft+JXnLSHaMe3DZwOy1IVRKaXxwTzqUlURd5DPtxext4GhrLGGWAsN3+mNBFyiAaRv qTWY9TLCzajm1IM0uegC3VmnpER8ffWUH3ibSVmbBnGgSlQsQYrWweOuKbxuPajR6VwS oZ4A== X-Gm-Message-State: AOAM533cn11X3WssFe6JApkrhMi8v6sl6Jbee1X1K5bqWoAtl1pC/oC8 XuM8FZjxUYDGawhz6m5xgSj4Ng== X-Google-Smtp-Source: ABdhPJyk1Y9orfUV6P3R4qlbXldagrKSa2FLHgi+CRTksLJHbpwDlxzvzf7nlQnq/V5xY0K/j2Le7Q== X-Received: by 2002:a2e:93c6:: with SMTP id p6mr24387703ljh.476.1638239094452; Mon, 29 Nov 2021 18:24:54 -0800 (PST) Received: from localhost ([31.134.121.151]) by smtp.gmail.com with ESMTPSA id y20sm1541405lfk.231.2021.11.29.18.24.53 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 29 Nov 2021 18:24:54 -0800 (PST) From: Sam Protsenko To: Krzysztof Kozlowski , Rob Herring , Greg Kroah-Hartman Cc: Jiri Slaby , Jaewon Kim , Chanho Park , David Virag , Youngmin Nam , devicetree@vger.kernel.org, linux-serial@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org Subject: [PATCH v2 2/5] soc: samsung: Add USI driver Date: Tue, 30 Nov 2021 04:24:50 +0200 Message-Id: <20211130022453.28648-1-semen.protsenko@linaro.org> X-Mailer: git-send-email 2.30.2 MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-samsung-soc@vger.kernel.org USIv2 IP-core is found on modern ARM64 Exynos SoCs (like Exynos850) and provides selectable serial protocol (one of: UART, SPI, I2C). USIv2 registers usually reside in the same register map as a particular underlying protocol it implements, but have some particular offset. E.g. on Exynos850 the USI_UART has 0x13820000 base address, where UART registers have 0x00..0x40 offsets, and USI registers have 0xc0..0xdc offsets. Desired protocol can be chosen via SW_CONF register from System Register block of the same domain as USI. Before starting to use a particular protocol, USIv2 must be configured properly: 1. Select protocol to be used via System Register 2. Clear "reset" flag in USI_CON 3. Configure HWACG behavior (e.g. for UART Rx the HWACG must be disabled, so that the IP clock is not gated automatically); this is done using USI_OPTION register 4. Keep both USI clocks (PCLK and IPCLK) running during USI registers modification This driver implements above behavior. Of course, USIv2 driver should be probed before UART/I2C/SPI drivers. It can be achived by embedding UART/I2C/SPI nodes inside of USI node (in Device Tree); driver then walks underlying nodes and instantiates those. Driver also handles USI configuration on PM resume, as register contents can be lost during CPU suspend. This driver is designed with different USI versions in mind. So it should be relatively easy to add new USI revisions to it later. Signed-off-by: Sam Protsenko --- Changes in v2: - Replaced arch_initcall() with module_platform_driver() - Reworked the whole driver for the easy adoption of other USI revisions - Added "mode" validation right after reading it from device tree - Handled new USI_V2_NONE value drivers/soc/samsung/Kconfig | 14 ++ drivers/soc/samsung/Makefile | 2 + drivers/soc/samsung/exynos-usi.c | 274 +++++++++++++++++++++++++++++++ 3 files changed, 290 insertions(+) create mode 100644 drivers/soc/samsung/exynos-usi.c diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig index e2cedef1e8d1..a9f8b224322e 100644 --- a/drivers/soc/samsung/Kconfig +++ b/drivers/soc/samsung/Kconfig @@ -23,6 +23,20 @@ config EXYNOS_CHIPID Support for Samsung Exynos SoC ChipID and Adaptive Supply Voltage. This driver can also be built as module (exynos_chipid). +config EXYNOS_USI + tristate "Exynos USI (Universal Serial Interface) driver" + default ARCH_EXYNOS && ARM64 + depends on ARCH_EXYNOS || COMPILE_TEST + select MFD_SYSCON + help + Enable support for USI block. USI (Universal Serial Interface) is an + IP-core found in modern Samsung Exynos SoCs, like Exynos850 and + ExynosAutoV0. USI block can be configured to provide one of the + following serial protocols: UART, SPI or High Speed I2C. + + This driver allows one to configure USI for desired protocol, which + is usually done in USI node in Device Tree. + config EXYNOS_PMU bool "Exynos PMU controller driver" if COMPILE_TEST depends on ARCH_EXYNOS || ((ARM || ARM64) && COMPILE_TEST) diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile index 2ae4bea804cf..9f59d1905ab0 100644 --- a/drivers/soc/samsung/Makefile +++ b/drivers/soc/samsung/Makefile @@ -4,6 +4,8 @@ obj-$(CONFIG_EXYNOS_ASV_ARM) += exynos5422-asv.o obj-$(CONFIG_EXYNOS_CHIPID) += exynos_chipid.o exynos_chipid-y += exynos-chipid.o exynos-asv.o +obj-$(CONFIG_EXYNOS_USI) += exynos-usi.o + obj-$(CONFIG_EXYNOS_PMU) += exynos-pmu.o obj-$(CONFIG_EXYNOS_PMU_ARM_DRIVERS) += exynos3250-pmu.o exynos4-pmu.o \ diff --git a/drivers/soc/samsung/exynos-usi.c b/drivers/soc/samsung/exynos-usi.c new file mode 100644 index 000000000000..6e4112696f49 --- /dev/null +++ b/drivers/soc/samsung/exynos-usi.c @@ -0,0 +1,274 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021 Linaro Ltd. + * Author: Sam Protsenko + * + * Samsung Exynos USI driver (Universal Serial Interface). + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +/* USIv2: System Register: SW_CONF register bits */ +#define USI_V2_SW_CONF_NONE 0x0 +#define USI_V2_SW_CONF_UART BIT(0) +#define USI_V2_SW_CONF_SPI BIT(1) +#define USI_V2_SW_CONF_I2C BIT(2) +#define USI_V2_SW_CONF_MASK (USI_V2_SW_CONF_UART | USI_V2_SW_CONF_SPI | \ + USI_V2_SW_CONF_I2C) + +/* USIv2: USI register offsets */ +#define USI_CON 0x04 +#define USI_OPTION 0x08 + +/* USIv2: USI register bits */ +#define USI_CON_RESET BIT(0) +#define USI_OPTION_CLKREQ_ON BIT(1) +#define USI_OPTION_CLKSTOP_ON BIT(2) + +enum exynos_usi_ver { + USI_VER2 = 2, +}; + +struct exynos_usi_variant { + enum exynos_usi_ver ver; /* USI IP-core version */ + unsigned int sw_conf_mask; /* SW_CONF mask for all protocols */ + size_t min_mode; /* first index in exynos_usi_modes[] */ + size_t max_mode; /* last index in exynos_usi_modes[] */ +}; + +struct exynos_usi { + struct device *dev; + void __iomem *regs; /* USI register map */ + struct clk *pclk; /* USI bus clock */ + struct clk *ipclk; /* USI operating clock */ + + size_t mode; /* current USI SW_CONF mode index */ + bool clkreq_on; /* always provide clock to IP */ + + /* System Register */ + struct regmap *sysreg; /* System Register map */ + unsigned int sw_conf; /* SW_CONF register offset in sysreg */ + + const struct exynos_usi_variant *data; +}; + +struct exynos_usi_mode { + const char *name; /* mode name */ + unsigned int val; /* mode register value */ +}; + +static const struct exynos_usi_mode exynos_usi_modes[] = { + [USI_V2_NONE] = { .name = "none", .val = USI_V2_SW_CONF_NONE }, + [USI_V2_UART] = { .name = "uart", .val = USI_V2_SW_CONF_UART }, + [USI_V2_SPI] = { .name = "spi", .val = USI_V2_SW_CONF_SPI }, + [USI_V2_I2C] = { .name = "i2c", .val = USI_V2_SW_CONF_I2C }, +}; + +static const struct exynos_usi_variant exynos_usi_v2_data = { + .ver = USI_VER2, + .sw_conf_mask = USI_V2_SW_CONF_MASK, + .min_mode = USI_V2_NONE, + .max_mode = USI_V2_I2C, +}; + +static const struct of_device_id exynos_usi_dt_match[] = { + { + .compatible = "samsung,exynos-usi-v2", + .data = &exynos_usi_v2_data, + }, + { }, /* sentinel */ +}; +MODULE_DEVICE_TABLE(of, exynos_usi_dt_match); + +/** + * exynos_usi_set_sw_conf - Set USI block configuration mode + * @usi: USI driver object + * @mode: Mode index + * + * Select underlying serial protocol (UART/SPI/I2C) in USI IP-core. + * + * Return: 0 on success, or negative error code on failure. + */ +static int exynos_usi_set_sw_conf(struct exynos_usi *usi, size_t mode) +{ + unsigned int val; + int ret; + + if (mode < usi->data->min_mode || mode > usi->data->max_mode) + return -EINVAL; + + val = exynos_usi_modes[mode].val; + ret = regmap_update_bits(usi->sysreg, usi->sw_conf, + usi->data->sw_conf_mask, val); + if (ret) + return ret; + + usi->mode = mode; + dev_dbg(usi->dev, "protocol: %s\n", exynos_usi_modes[usi->mode].name); + + return 0; +} + +/** + * exynos_usi_enable - Initialize USI block + * @usi: USI driver object + * + * USI IP-core start state is "reset" (on startup and after CPU resume). This + * routine enables USI block by clearing the reset flag. It also configures + * HWACG behavior (needed e.g. for UART Rx). It should be performed before + * underlying protocol becomes functional. + * + * Return: 0 on success, or negative error code on failure. + */ +static int exynos_usi_enable(const struct exynos_usi *usi) +{ + u32 val; + int ret; + + ret = clk_prepare_enable(usi->pclk); + if (ret) + return ret; + + ret = clk_prepare_enable(usi->ipclk); + if (ret) + goto err_pclk; + + /* Enable USI block */ + val = readl(usi->regs + USI_CON); + val &= ~USI_CON_RESET; + writel(val, usi->regs + USI_CON); + udelay(1); + + /* Continuously provide the clock to USI IP w/o gating */ + if (usi->clkreq_on) { + val = readl(usi->regs + USI_OPTION); + val &= ~USI_OPTION_CLKSTOP_ON; + val |= USI_OPTION_CLKREQ_ON; + writel(val, usi->regs + USI_OPTION); + } + + clk_disable_unprepare(usi->ipclk); +err_pclk: + clk_disable_unprepare(usi->pclk); + return ret; +} + +static int exynos_usi_configure(struct exynos_usi *usi) +{ + int ret; + + ret = exynos_usi_set_sw_conf(usi, usi->mode); + if (ret) + return ret; + + if (usi->data->ver == USI_VER2) + return exynos_usi_enable(usi); + + return 0; +} + +static int exynos_usi_parse_dt(struct device_node *np, struct exynos_usi *usi) +{ + int ret; + u32 mode; + + ret = of_property_read_u32(np, "samsung,mode", &mode); + if (ret) + return ret; + if (mode < usi->data->min_mode || mode > usi->data->max_mode) + return -EINVAL; + usi->mode = mode; + + usi->sysreg = syscon_regmap_lookup_by_phandle(np, "samsung,sysreg"); + if (IS_ERR(usi->sysreg)) + return PTR_ERR(usi->sysreg); + + ret = of_property_read_u32_index(np, "samsung,sysreg", 1, + &usi->sw_conf); + if (ret) + return ret; + + usi->clkreq_on = of_property_read_bool(np, "samsung,clkreq-on"); + + return 0; +} + +static int exynos_usi_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct exynos_usi *usi; + int ret; + + usi = devm_kzalloc(dev, sizeof(*usi), GFP_KERNEL); + if (!usi) + return -ENOMEM; + + usi->dev = dev; + platform_set_drvdata(pdev, usi); + + usi->data = of_device_get_match_data(dev); + if (!usi->data) + return -EINVAL; + + ret = exynos_usi_parse_dt(np, usi); + if (ret) + return ret; + + if (usi->data->ver == USI_VER2) { + usi->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(usi->regs)) + return PTR_ERR(usi->regs); + + usi->pclk = devm_clk_get(dev, "pclk"); + if (IS_ERR(usi->pclk)) + return PTR_ERR(usi->pclk); + + usi->ipclk = devm_clk_get(dev, "ipclk"); + if (IS_ERR(usi->ipclk)) + return PTR_ERR(usi->ipclk); + } + + ret = exynos_usi_configure(usi); + if (ret) + return ret; + + /* Make it possible to embed protocol nodes into USI np */ + return of_platform_populate(np, NULL, NULL, dev); +} + +#ifdef CONFIG_PM_SLEEP +static int exynos_usi_resume_noirq(struct device *dev) +{ + struct exynos_usi *usi = dev_get_drvdata(dev); + + return exynos_usi_configure(usi); +} +#endif + +static const struct dev_pm_ops exynos_usi_pm = { + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(NULL, exynos_usi_resume_noirq) +}; + +static struct platform_driver exynos_usi_driver = { + .driver = { + .name = "exynos-usi", + .pm = &exynos_usi_pm, + .of_match_table = exynos_usi_dt_match, + }, + .probe = exynos_usi_probe, +}; + +module_platform_driver(exynos_usi_driver); + +MODULE_DESCRIPTION("Samsung USI driver"); +MODULE_AUTHOR("Sam Protsenko "); +MODULE_LICENSE("GPL"); From patchwork Tue Nov 30 02:27:38 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sam Protsenko X-Patchwork-Id: 517449 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id ACC52C433EF for ; Tue, 30 Nov 2021 02:27:44 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236628AbhK3CbC (ORCPT ); Mon, 29 Nov 2021 21:31:02 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59670 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232743AbhK3CbC (ORCPT ); Mon, 29 Nov 2021 21:31:02 -0500 Received: from mail-lj1-x232.google.com (mail-lj1-x232.google.com [IPv6:2a00:1450:4864:20::232]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 981F6C061714 for ; Mon, 29 Nov 2021 18:27:43 -0800 (PST) Received: by mail-lj1-x232.google.com with SMTP id j18so24958020ljc.12 for ; Mon, 29 Nov 2021 18:27:43 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=OVtPKHU/UyhyPfruAPKFG828wihrrr+mzXVKZt4x00A=; b=yH9owDeU8M6oLxFmGgW/KvWY+fiBdw3phLJOSsVdQsc2R2oxg+CrxPKoupnXBU3IJ2 1G4Zhkw8QTXQkHxsQXjvdLqh3FEaAmsNVZWfp5r6iunR5dmSE+txN7B4pJpjZo5EU1ol qnfb9z7jknwplAs7lH+XAeLPVCqc8yU6H4Kt4AHl4nqPbIIUmMsp47p8NoPf6mSELmXZ orXqhVQ2z3EceXmZg+aGfDYea0Re8AxuUIOqPIMDJ9CHGYg9tXs+f3tSAQyilAXwCvsa gD0icHuHTdg3dttpL42FjIdHkOAt64oNRP2wf7EIFx0pHSvf3sXLVg+HkwmvN3nQ/5+3 tiJw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=OVtPKHU/UyhyPfruAPKFG828wihrrr+mzXVKZt4x00A=; b=qrWt77+YsDtzOklKS92FUbZUSJaxmB+D45bRDvSQNe+lPsR7BHxIbKT08CM6bvqh3u 3+mWdNONJM137zG3F36BaHSX71GJeR5D5JXmmhjbuo+8VpenN1KpWXAjHAHFWeW8aF3v FxJZe/YSgF73YYQNsGA9GZeCK7LEYsGB5aOljYOlIfC1XwoIXeXRYrvEhikdBuA3unst NFqmNtT5Q7DAa+q/R5As4CfVZY1fduEsexQp1g+2Vu1S9hJX1n/JfM2AnbKVum3ZHJQG VptLaz6k5qnOOaLANBCVLlD2hHMmNB1kvBh+3bo0x3WiHlyuu8H98rSRhzWn34olgIOz lLsA== X-Gm-Message-State: AOAM5304XhCoalvZ9rdn8IxkJAUeOmhC8AsxIQv11F1i1DDmuMi8y+Sk NjM13VDGupiMLRoCE5QtXX9auQ== X-Google-Smtp-Source: ABdhPJx3iA+USaLENMZnnccCsX0zfNN/OoEasKJUFqY3MkeYddZpOycdziVRyp8u1AOXeiTnmMIwUA== X-Received: by 2002:a2e:91d4:: with SMTP id u20mr52770714ljg.92.1638239261863; Mon, 29 Nov 2021 18:27:41 -0800 (PST) Received: from localhost ([31.134.121.151]) by smtp.gmail.com with ESMTPSA id b12sm1547639lfb.41.2021.11.29.18.27.41 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 29 Nov 2021 18:27:41 -0800 (PST) From: Sam Protsenko To: Krzysztof Kozlowski , Rob Herring , Greg Kroah-Hartman Cc: Jiri Slaby , Jaewon Kim , Chanho Park , David Virag , Youngmin Nam , devicetree@vger.kernel.org, linux-serial@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org Subject: [PATCH v2 3/5] tty: serial: samsung: Remove USI initialization Date: Tue, 30 Nov 2021 04:27:38 +0200 Message-Id: <20211130022740.28784-1-semen.protsenko@linaro.org> X-Mailer: git-send-email 2.30.2 MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-samsung-soc@vger.kernel.org USI control is now extracted to dedicated USI driver. Remove USI related code from serial driver to avoid conflicts and code duplication. Signed-off-by: Sam Protsenko --- Changes in v2: - (none) drivers/tty/serial/samsung_tty.c | 36 ++++---------------------------- include/linux/serial_s3c.h | 9 -------- 2 files changed, 4 insertions(+), 41 deletions(-) diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c index ca084c10d0bb..f986a9253dc8 100644 --- a/drivers/tty/serial/samsung_tty.c +++ b/drivers/tty/serial/samsung_tty.c @@ -65,7 +65,6 @@ enum s3c24xx_port_type { struct s3c24xx_uart_info { char *name; enum s3c24xx_port_type type; - bool has_usi; unsigned int port_type; unsigned int fifosize; unsigned long rx_fifomask; @@ -1357,28 +1356,6 @@ static int apple_s5l_serial_startup(struct uart_port *port) return ret; } -static void exynos_usi_init(struct uart_port *port) -{ - struct s3c24xx_uart_port *ourport = to_ourport(port); - struct s3c24xx_uart_info *info = ourport->info; - unsigned int val; - - if (!info->has_usi) - return; - - /* Clear the software reset of USI block (it's set at startup) */ - val = rd_regl(port, USI_CON); - val &= ~USI_CON_RESET_MASK; - wr_regl(port, USI_CON, val); - udelay(1); - - /* Continuously provide the clock to USI IP w/o gating (for Rx mode) */ - val = rd_regl(port, USI_OPTION); - val &= ~USI_OPTION_HWACG_MASK; - val |= USI_OPTION_HWACG_CLKREQ_ON; - wr_regl(port, USI_OPTION, val); -} - /* power power management control */ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level, @@ -1405,8 +1382,6 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level, if (!IS_ERR(ourport->baudclk)) clk_prepare_enable(ourport->baudclk); - - exynos_usi_init(port); break; default: dev_err(port->dev, "s3c24xx_serial: unknown pm %d\n", level); @@ -2130,8 +2105,6 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, if (ret) pr_warn("uart: failed to enable baudclk\n"); - exynos_usi_init(port); - /* Keep all interrupts masked and cleared */ switch (ourport->info->type) { case TYPE_S3C6400: @@ -2780,11 +2753,10 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { #endif #if defined(CONFIG_ARCH_EXYNOS) -#define EXYNOS_COMMON_SERIAL_DRV_DATA(_has_usi) \ +#define EXYNOS_COMMON_SERIAL_DRV_DATA() \ .info = &(struct s3c24xx_uart_info) { \ .name = "Samsung Exynos UART", \ .type = TYPE_S3C6400, \ - .has_usi = _has_usi, \ .port_type = PORT_S3C6400, \ .has_divslot = 1, \ .rx_fifomask = S5PV210_UFSTAT_RXMASK, \ @@ -2805,17 +2777,17 @@ static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { } \ static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = { - EXYNOS_COMMON_SERIAL_DRV_DATA(false), + EXYNOS_COMMON_SERIAL_DRV_DATA(), .fifosize = { 256, 64, 16, 16 }, }; static struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = { - EXYNOS_COMMON_SERIAL_DRV_DATA(false), + EXYNOS_COMMON_SERIAL_DRV_DATA(), .fifosize = { 64, 256, 16, 256 }, }; static struct s3c24xx_serial_drv_data exynos850_serial_drv_data = { - EXYNOS_COMMON_SERIAL_DRV_DATA(true), + EXYNOS_COMMON_SERIAL_DRV_DATA(), .fifosize = { 256, 64, 64, 64 }, }; diff --git a/include/linux/serial_s3c.h b/include/linux/serial_s3c.h index cf0de4a86640..f6c3323fc4c5 100644 --- a/include/linux/serial_s3c.h +++ b/include/linux/serial_s3c.h @@ -27,15 +27,6 @@ #define S3C2410_UERSTAT (0x14) #define S3C2410_UFSTAT (0x18) #define S3C2410_UMSTAT (0x1C) -#define USI_CON (0xC4) -#define USI_OPTION (0xC8) - -#define USI_CON_RESET (1<<0) -#define USI_CON_RESET_MASK (1<<0) - -#define USI_OPTION_HWACG_CLKREQ_ON (1<<1) -#define USI_OPTION_HWACG_CLKSTOP_ON (1<<2) -#define USI_OPTION_HWACG_MASK (3<<1) #define S3C2410_LCON_CFGMASK ((0xF<<3)|(0x3)) From patchwork Tue Nov 30 02:27:39 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sam Protsenko X-Patchwork-Id: 518578 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 4AE0EC433EF for ; Tue, 30 Nov 2021 02:27:47 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S237508AbhK3CbE (ORCPT ); Mon, 29 Nov 2021 21:31:04 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59690 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S237504AbhK3CbE (ORCPT ); Mon, 29 Nov 2021 21:31:04 -0500 Received: from mail-lf1-x136.google.com (mail-lf1-x136.google.com [IPv6:2a00:1450:4864:20::136]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 1BDECC061748 for ; Mon, 29 Nov 2021 18:27:45 -0800 (PST) Received: by mail-lf1-x136.google.com with SMTP id u3so49782122lfl.2 for ; Mon, 29 Nov 2021 18:27:45 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=DjrKmm2WgaX87gIsGbMuz72ppQb8wewAQBmcfjqw3Gs=; b=XGILT3CfcE4kMyANq7bSTdH0QFSDL/+tG5w+aovYWrSS4otjinc/EsS9TlLwk5cl+t VFnMbpdVAO7wD+86m/f1wYIvqsy/a8PECHUAdvUcDJ76oCA/ftNSF4DeRTTt0E3Jx9x9 MRn8p/ZRLeeWMx6zmw8InMcAGJDDYrxoARd22ioEktvQIxrfOZP+qCE8DvOQjKpOO2X9 JAIEzphDwYqvi8j1eRXAcUjGKGEOKmMwlF992uml4GC8bO1gLu0yMj6V4uXmg6+KEphl XB0AFHGTMLIGf4XwkEDY99GE3xyk6t+6/LWB3FVjVg+5og/6zgmuRdahlWqJP1tyMgKo guEg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=DjrKmm2WgaX87gIsGbMuz72ppQb8wewAQBmcfjqw3Gs=; b=4X8MxPLlq0j7lnR2nF8OgSSMq/9vVvhLcVq+EEAyxzXELms63sKl6Vaxn9IyQ0QSNe SxeTgege9QJwaEYqp/FETlvvbFI8l77cZIRALJcTVO+n6sHe4voJ7h5ODhOdqLx4F/Vk nhmAZPMI7IS5zCZzEzvbeEGTRb/8lCWmdBDng7uR5j9nGSVcRSu+NDRntJrGcfzdR97N ce/y94NSi7KAaSkbbeAomaJq+pFSCC5n+64O2vlzRkO8ZkllGeIKUbC8KUI9xzqGKJzw oKfkS3BBN4fffmMOuTYbufY5jqyS5Kq27I4eu0P4DkFD9S7qdb68nFOHaa2YGBkJNzS1 4xPg== X-Gm-Message-State: AOAM5305dyx2BtL0rNPQrxiWFf3vifeAGgrd2S0ZgiNdLLLL3J8hxtu1 egXq1g4yxWfysI0ToDM9aqZjCQ== X-Google-Smtp-Source: ABdhPJy9w4OSiM/X9hJPqQvt6CKdaqi12cJt/JRDPlUUHCZMcMVlsYVIHiyuZTcMJKqMeoqst+bNYg== X-Received: by 2002:a05:6512:2350:: with SMTP id p16mr52129668lfu.117.1638239263333; Mon, 29 Nov 2021 18:27:43 -0800 (PST) Received: from localhost ([31.134.121.151]) by smtp.gmail.com with ESMTPSA id i10sm1543136lfv.22.2021.11.29.18.27.42 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 29 Nov 2021 18:27:42 -0800 (PST) From: Sam Protsenko To: Krzysztof Kozlowski , Rob Herring , Greg Kroah-Hartman Cc: Jiri Slaby , Jaewon Kim , Chanho Park , David Virag , Youngmin Nam , devicetree@vger.kernel.org, linux-serial@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org Subject: [PATCH v2 4/5] tty: serial: samsung: Enable console as module Date: Tue, 30 Nov 2021 04:27:39 +0200 Message-Id: <20211130022740.28784-2-semen.protsenko@linaro.org> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20211130022740.28784-1-semen.protsenko@linaro.org> References: <20211130022740.28784-1-semen.protsenko@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-samsung-soc@vger.kernel.org Enable serial driver to be built as a module. To do so, init the console support on driver/module load instead of using console_initcall(). This is needed for proper support of USI driver (which can be built as a module, which in turn makes SERIAL_SAMSUNG be a module too). It also might be useful for Android GKI modularization efforts. Inspired by commit 87a0b9f98ac5 ("tty: serial: meson: enable console as module"). Signed-off-by: Sam Protsenko --- Changes in v2: - Added error path handling in samsung_serial_init() - Added console unregister in samsung_serial_exit() drivers/tty/serial/Kconfig | 2 +- drivers/tty/serial/samsung_tty.c | 36 ++++++++++++++++++++++++++++---- 2 files changed, 33 insertions(+), 5 deletions(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index fc543ac97c13..0e5ccb25bdb1 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -263,7 +263,7 @@ config SERIAL_SAMSUNG_UARTS config SERIAL_SAMSUNG_CONSOLE bool "Support for console on Samsung SoC serial port" - depends on SERIAL_SAMSUNG=y + depends on SERIAL_SAMSUNG select SERIAL_CORE_CONSOLE select SERIAL_EARLYCON help diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c index f986a9253dc8..61ccb359620a 100644 --- a/drivers/tty/serial/samsung_tty.c +++ b/drivers/tty/serial/samsung_tty.c @@ -1715,15 +1715,21 @@ s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser) static struct console s3c24xx_serial_console; -static int __init s3c24xx_serial_console_init(void) +static void __init s3c24xx_serial_register_console(void) { register_console(&s3c24xx_serial_console); - return 0; } -console_initcall(s3c24xx_serial_console_init); + +static void s3c24xx_serial_unregister_console(void) +{ + if (s3c24xx_serial_console.flags & CON_ENABLED) + unregister_console(&s3c24xx_serial_console); +} #define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console #else +static inline void s3c24xx_serial_register_console(void) { } +static inline void s3c24xx_serial_unregister_console(void) { } #define S3C24XX_SERIAL_CONSOLE NULL #endif @@ -2898,7 +2904,29 @@ static struct platform_driver samsung_serial_driver = { }, }; -module_platform_driver(samsung_serial_driver); +static int __init samsung_serial_init(void) +{ + int ret; + + s3c24xx_serial_register_console(); + + ret = platform_driver_register(&samsung_serial_driver); + if (ret) { + s3c24xx_serial_unregister_console(); + return ret; + } + + return 0; +} + +static void __exit samsung_serial_exit(void) +{ + platform_driver_unregister(&samsung_serial_driver); + s3c24xx_serial_unregister_console(); +} + +module_init(samsung_serial_init); +module_exit(samsung_serial_exit); #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE /* From patchwork Tue Nov 30 02:27:40 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sam Protsenko X-Patchwork-Id: 517448 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id BDAE1C433F5 for ; Tue, 30 Nov 2021 02:27:49 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S237534AbhK3CbG (ORCPT ); Mon, 29 Nov 2021 21:31:06 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59696 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S237516AbhK3CbF (ORCPT ); Mon, 29 Nov 2021 21:31:05 -0500 Received: from mail-lf1-x12d.google.com (mail-lf1-x12d.google.com [IPv6:2a00:1450:4864:20::12d]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 6A3FFC061746 for ; Mon, 29 Nov 2021 18:27:46 -0800 (PST) Received: by mail-lf1-x12d.google.com with SMTP id f18so49758727lfv.6 for ; Mon, 29 Nov 2021 18:27:46 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=Sw2B10ZabkZdmPrt9wGzMiX2Z/pOJb9hGFk18ZvN3TQ=; b=uRRTnpkmJRovj4VGeoOzMQOMFnOY81vWLi0/mNmNtunh+im+Uz0dayEunYo1fCe2ld bM40bIqqEg4vMN5NXV6yloNgcjgguQq4GqW6o6JqGg6sgEagOlVKxdAt/ONGKUI0s+Ck JOsabDC3E0AgueQbyOpH/3bKJv2k5WgfBCqbkVjPj3BRO54gdIwbk1oxvyxxO7OiNP9t 47zZ1Ft56KoaxyD+K2d0qwOsAPCnLxFBFKMAiDQNZoKg/JAt1m26GPlOuZ75wlhnNqET TnzFwlKSinO9ACD7KS2vVyzNSdvW4X5P6qKO6VzbGfuogOgN6MNwcTgoV2aLitc9mCc+ NNFg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=Sw2B10ZabkZdmPrt9wGzMiX2Z/pOJb9hGFk18ZvN3TQ=; b=S4mX2X/dploZPNJ3qJpEB1jBy5qhBydQdnw2BjB4XaIi1pXDWBhq6JI05bUewvrLn2 TX8iOboXfpOIlPk6DXURBfx+hsfrT0BHcduBZurnRy7TDOcAjzsyMP3yB6vWx2v0BYlm 7bbDVbfBBf3L0vGFn8JfDlm5KZ/ELUQHtvE6HKlYVc4r9MzJsbk7h/Hvt7vtTqYOdRuG iSQW6wDtQD8BAH8m7/kwQA1euzHPturDNv4l0/+xv1cK544t2s7LUe0GJoYJer0Xjv7g 8IuyriJPyKivKbpI6CEBtQ+ZGgUJRC2qX6/aQGmnlBC3iTT/rEMTJKv5nL5Lo2/LQGul CItQ== X-Gm-Message-State: AOAM53313EESRW4wtoDqAFf50UmGBILqTTDV2JL3RHu/ksnaQuI5vC5E yRVRrSTR7InimTw2zM317Eberw== X-Google-Smtp-Source: ABdhPJzaKLAxg0ubI311l+8aBbMJGAYwd17eXVXKm69X/tqVUamxhV/v6ZUDEhxuMQ8udSKC8hDRAQ== X-Received: by 2002:a19:6717:: with SMTP id b23mr51152485lfc.659.1638239264749; Mon, 29 Nov 2021 18:27:44 -0800 (PST) Received: from localhost ([31.134.121.151]) by smtp.gmail.com with ESMTPSA id f10sm1537494lfu.122.2021.11.29.18.27.44 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 29 Nov 2021 18:27:44 -0800 (PST) From: Sam Protsenko To: Krzysztof Kozlowski , Rob Herring , Greg Kroah-Hartman Cc: Jiri Slaby , Jaewon Kim , Chanho Park , David Virag , Youngmin Nam , devicetree@vger.kernel.org, linux-serial@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org Subject: [PATCH v2 5/5] tty: serial: samsung: Fix console registration from module Date: Tue, 30 Nov 2021 04:27:40 +0200 Message-Id: <20211130022740.28784-3-semen.protsenko@linaro.org> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20211130022740.28784-1-semen.protsenko@linaro.org> References: <20211130022740.28784-1-semen.protsenko@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-samsung-soc@vger.kernel.org On modern Exynos SoCs (like Exynos850) the UART can be implemented as a part of USI IP-core. In such case, USI driver is used to initialize USI registers, and it also calls of_platform_populate() to instantiate all sub-nodes (e.g. serial node) of USI node. When serial driver is built-in, but USI driver is a module, and CONFIG_SERIAL_SAMSUNG_CONSOLE is enabled, next call chain will happen when loading USI module from user space: usi_init v usi_probe v of_platform_populate v s3c24xx_serial_probe v uart_add_one_port v uart_configure_port v register_console v try_enable_new_console v s3c24xx_serial_console_setup But because the serial driver is built-in, and s3c24xx_serial_console_setup() is marked with __init keyword, that symbol will discarded and long gone by that time already, causing failed paging request. That happens during the next config combination: EXYNOS_USI=m SERIAL_SAMSUNG=y SERIAL_SAMSUNG_CONSOLE=y That config should be completely possible, so rather than limiting SERIAL_SAMSUNG choice to "m" only when USI=m, remove __init keyword for all affected functions. Signed-off-by: Sam Protsenko --- Changes in v2: - This patch is added in v2 drivers/tty/serial/samsung_tty.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c index 61ccb359620a..d002a4e48ed9 100644 --- a/drivers/tty/serial/samsung_tty.c +++ b/drivers/tty/serial/samsung_tty.c @@ -2500,7 +2500,8 @@ s3c24xx_serial_console_write(struct console *co, const char *s, uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar); } -static void __init +/* Shouldn't be __init, as it can be instantiated from other module */ +static void s3c24xx_serial_get_options(struct uart_port *port, int *baud, int *parity, int *bits) { @@ -2563,7 +2564,8 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud, } } -static int __init +/* Shouldn't be __init, as it can be instantiated from other module */ +static int s3c24xx_serial_console_setup(struct console *co, char *options) { struct uart_port *port;