From patchwork Wed Jan 12 17:27:18 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Jean-Michel Hautbois X-Patchwork-Id: 531668 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id C8B1FC433EF for ; Wed, 12 Jan 2022 17:27:48 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1355591AbiALR1q (ORCPT ); Wed, 12 Jan 2022 12:27:46 -0500 Received: from perceval.ideasonboard.com ([213.167.242.64]:47014 "EHLO perceval.ideasonboard.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1348497AbiALR1n (ORCPT ); Wed, 12 Jan 2022 12:27:43 -0500 Received: from tatooine.ideasonboard.com (unknown [IPv6:2a01:e0a:169:7140:662a:d95e:24d7:7832]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 820F7D88; Wed, 12 Jan 2022 18:27:40 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1642008460; bh=xySexMy+FThkkjSsUSlMiT47Fe8ImvunotezqPmdgSY=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=kL2JjzfFBrOfm/+6BRiTu5qIWeuDapiNQwPUcNORMTBuGP/TKdaZicUT4ZzgjcZRQ aKFH2I9r646MFBzzGZuoT5HR/cUE9OOb2SU2/Tf1qixnqAt2F5vDJvj6I2pWv3mA4N JRIfPDyof98nrZVIimMZwVHJewncXpwqRIVO7zXw= From: Jean-Michel Hautbois To: linux-media@vger.kernel.org Cc: kernel-list@raspberrypi.com, mchehab@kernel.org, dave.stevenson@raspberrypi.com, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, laurent.pinchart@ideasonboard.com, naush@raspberrypi.com, lukasz@jany.st, devicetree@vger.kernel.org, jeanmichel.hautbois@ideasonboard.com Subject: [RFC PATCH 1/3] media: dt-bindings: media: Add bindings for bcm2835-unicam Date: Wed, 12 Jan 2022 18:27:18 +0100 Message-Id: <20220112172719.1178446-2-jeanmichel.hautbois@ideasonboard.com> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20220112172719.1178446-1-jeanmichel.hautbois@ideasonboard.com> References: <20220112172719.1178446-1-jeanmichel.hautbois@ideasonboard.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Introduce the dt-bindinds documentation for bcm2835 CCP2/CSI2 camera interface. Also add a MAINTAINERS entry for it. Signed-off-by: Dave Stevenson Signed-off-by: Naushir Patuck Signed-off-by: Jean-Michel Hautbois --- Dave: I assumed you were the maintainer for this file, as I based it on the bcm2835-unicam.txt file. Are you happy to be added directly as the maintainer, or should this be specified as "Raspberry Pi Kernel Maintenance " --- .../bindings/media/brcm,bcm2835-unicam.yaml | 103 ++++++++++++++++++ MAINTAINERS | 6 + 2 files changed, 109 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml diff --git a/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml b/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml new file mode 100644 index 000000000000..1427514142cf --- /dev/null +++ b/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/brcm,bcm2835-unicam.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM283x Camera Interface (Unicam) + +maintainers: + - Dave Stevenson + +description: |- + The Unicam block on BCM283x SoCs is the receiver for either + CSI-2 or CCP2 data from image sensors or similar devices. + + The main platform using this SoC is the Raspberry Pi family of boards. + On the Pi the VideoCore firmware can also control this hardware block, + and driving it from two different processors will cause issues. + To avoid this, the firmware checks the device tree configuration + during boot. If it finds device tree nodes called csi0 or csi1 then + it will stop the firmware accessing the block, and it can then + safely be used via the device tree binding. + +properties: + compatible: + const: brcm,bcm2835-unicam + + reg: + description: + physical base address and length of the register sets for the device. + maxItems: 1 + + interrupts: + description: the IRQ line for this Unicam instance. + maxItems: 1 + + clocks: + description: |- + list of clock specifiers, corresponding to entries in clock-names + property. + + clock-names: + items: + - const: lp + - const: vpu + + port: + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - port + +additionalProperties: False + +examples: + - | + csi1: csi1@7e801000 { + compatible = "brcm,bcm2835-unicam"; + reg = <0x7e801000 0x800>, + <0x7e802004 0x4>; + interrupts = <2 7>; + clocks = <&clocks BCM2835_CLOCK_CAM1>, + <&firmware_clocks 4>; + clock-names = "lp", "vpu"; + port { + csi1_ep: endpoint { + remote-endpoint = <&tc358743_0>; + data-lanes = <1 2>; + }; + }; + }; + + i2c0: i2c@7e205000 { + tc358743: csi-hdmi-bridge@0f { + compatible = "toshiba,tc358743"; + reg = <0x0f>; + clocks = <&tc358743_clk>; + clock-names = "refclk"; + + tc358743_clk: bridge-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + + port { + tc358743_0: endpoint { + remote-endpoint = <&csi1_ep>; + clock-lanes = <0>; + data-lanes = <1 2>; + clock-noncontinuous; + link-frequencies = + /bits/ 64 <297000000>; + }; + }; + }; + }; +... diff --git a/MAINTAINERS b/MAINTAINERS index 269aa4d6b94a..7484255cad31 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3653,6 +3653,12 @@ N: bcm113* N: bcm216* N: kona +BROADCOM BCM2835 CAMERA DRIVER +M: Raspberry Pi Kernel Maintenance +L: linux-media@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml + BROADCOM BCM47XX MIPS ARCHITECTURE M: Hauke Mehrtens M: Rafał Miłecki From patchwork Wed Jan 12 17:27:19 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jean-Michel Hautbois X-Patchwork-Id: 531871 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 02C15C4332F for ; Wed, 12 Jan 2022 17:27:53 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1355599AbiALR1s (ORCPT ); Wed, 12 Jan 2022 12:27:48 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:60642 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1355566AbiALR1o (ORCPT ); Wed, 12 Jan 2022 12:27:44 -0500 Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [IPv6:2001:4b98:dc2:55:216:3eff:fef7:d647]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 62CC8C061748; Wed, 12 Jan 2022 09:27:43 -0800 (PST) Received: from tatooine.ideasonboard.com (unknown [IPv6:2a01:e0a:169:7140:662a:d95e:24d7:7832]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 5C786E41; Wed, 12 Jan 2022 18:27:41 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1642008461; bh=DsitoW0yO7/XTdFRvk73BCOgmHXm1Suw91jAukQeWnc=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=pUh+BVUPjum6ayKOwx9Bo23dtNxTcgGtAjtr/I4UvJx06yL1suWlnhA7NBj2yBl0L qkn23jZsnz1qZC3Ba9QgRnF54EYfNc4SUXKGpPkIJkD0wPaabyENYg8qdqTK37jAJP rTAWVboQCt++YTTKUuBmR4iRpMKdGvPXj2XxMnV8= From: Jean-Michel Hautbois To: linux-media@vger.kernel.org Cc: kernel-list@raspberrypi.com, mchehab@kernel.org, dave.stevenson@raspberrypi.com, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, laurent.pinchart@ideasonboard.com, naush@raspberrypi.com, lukasz@jany.st, devicetree@vger.kernel.org, jeanmichel.hautbois@ideasonboard.com Subject: [RFC PATCH 2/3] media: bcm2835-unicam: Add support for for CCP2/CSI2 camera interface Date: Wed, 12 Jan 2022 18:27:19 +0100 Message-Id: <20220112172719.1178446-3-jeanmichel.hautbois@ideasonboard.com> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20220112172719.1178446-1-jeanmichel.hautbois@ideasonboard.com> References: <20220112172719.1178446-1-jeanmichel.hautbois@ideasonboard.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Add driver for the Unicam camera receiver block on BCM283x processors. It is represented as two video device nodes: unicam-image and unicam-embedded which are connected to an internal subdev (named unicam-subdev) in order to manage streams routing. Signed-off-by: Dave Stevenson Signed-off-by: Naushir Patuck Signed-off-by: Jean-Michel Hautbois --- MAINTAINERS | 1 + drivers/media/platform/Kconfig | 1 + drivers/media/platform/Makefile | 2 + drivers/media/platform/bcm2835/Kconfig | 21 + drivers/media/platform/bcm2835/Makefile | 3 + .../media/platform/bcm2835/bcm2835-unicam.c | 2694 +++++++++++++++++ .../media/platform/bcm2835/vc4-regs-unicam.h | 253 ++ 7 files changed, 2975 insertions(+) create mode 100644 drivers/media/platform/bcm2835/Kconfig create mode 100644 drivers/media/platform/bcm2835/Makefile create mode 100644 drivers/media/platform/bcm2835/bcm2835-unicam.c create mode 100644 drivers/media/platform/bcm2835/vc4-regs-unicam.h diff --git a/MAINTAINERS b/MAINTAINERS index 7484255cad31..dd7f8321fe27 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3658,6 +3658,7 @@ M: Raspberry Pi Kernel Maintenance L: linux-media@vger.kernel.org S: Maintained F: Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml +F: drivers/media/platform/bcm2835/ BROADCOM BCM47XX MIPS ARCHITECTURE M: Hauke Mehrtens diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index 9fbdba0fd1e7..033b0358fbb8 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -170,6 +170,7 @@ source "drivers/media/platform/am437x/Kconfig" source "drivers/media/platform/xilinx/Kconfig" source "drivers/media/platform/rcar-vin/Kconfig" source "drivers/media/platform/atmel/Kconfig" +source "drivers/media/platform/bcm2835/Kconfig" source "drivers/media/platform/sunxi/Kconfig" config VIDEO_TI_CAL diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile index 19bcbced7382..689e64857db1 100644 --- a/drivers/media/platform/Makefile +++ b/drivers/media/platform/Makefile @@ -85,6 +85,8 @@ obj-$(CONFIG_VIDEO_QCOM_CAMSS) += qcom/camss/ obj-$(CONFIG_VIDEO_QCOM_VENUS) += qcom/venus/ +obj-y += bcm2835/ + obj-y += sunxi/ obj-$(CONFIG_VIDEO_MESON_GE2D) += meson/ge2d/ diff --git a/drivers/media/platform/bcm2835/Kconfig b/drivers/media/platform/bcm2835/Kconfig new file mode 100644 index 000000000000..bd1370199650 --- /dev/null +++ b/drivers/media/platform/bcm2835/Kconfig @@ -0,0 +1,21 @@ +# Broadcom VideoCore4 V4L2 camera support + +config VIDEO_BCM2835_UNICAM + tristate "Broadcom BCM283x/BCM271x Unicam video capture driver" + depends on VIDEO_V4L2 + depends on ARCH_BCM2835 || COMPILE_TEST + select VIDEO_V4L2_SUBDEV_API + select MEDIA_CONTROLLER + select VIDEOBUF2_DMA_CONTIG + select V4L2_FWNODE + help + Say Y here to enable support for the BCM283x/BCM271x CSI-2 receiver. + This is a V4L2 driver that controls the CSI-2 receiver directly, + independently from the VC4 firmware. + This driver is mutually exclusive with the use of bcm2835-camera. The + firmware will disable all access to the peripheral from within the + firmware if it finds a DT node using it, and bcm2835-camera will + therefore fail to probe. + + To compile this driver as a module, choose M here. The module will be + called bcm2835-unicam. diff --git a/drivers/media/platform/bcm2835/Makefile b/drivers/media/platform/bcm2835/Makefile new file mode 100644 index 000000000000..a98aba03598a --- /dev/null +++ b/drivers/media/platform/bcm2835/Makefile @@ -0,0 +1,3 @@ +# Makefile for BCM2835 Unicam driver + +obj-$(CONFIG_VIDEO_BCM2835_UNICAM) += bcm2835-unicam.o diff --git a/drivers/media/platform/bcm2835/bcm2835-unicam.c b/drivers/media/platform/bcm2835/bcm2835-unicam.c new file mode 100644 index 000000000000..2970d318f3f9 --- /dev/null +++ b/drivers/media/platform/bcm2835/bcm2835-unicam.c @@ -0,0 +1,2694 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * BCM283x / BCM271x Unicam Capture Driver + * + * Copyright (C) 2017-2020 - Raspberry Pi (Trading) Ltd. + * + * Dave Stevenson + * + * Based on TI am437x driver by + * Benoit Parrot + * Lad, Prabhakar + * + * and TI CAL camera interface driver by + * Benoit Parrot + * + * + * There are two camera drivers in the kernel for BCM283x - this one + * and bcm2835-camera (currently in staging). + * + * This driver directly controls the Unicam peripheral - there is no + * involvement with the VideoCore firmware. Unicam receives CSI-2 or + * CCP2 data and writes it into SDRAM. + * The only potential processing options are to repack Bayer data into an + * alternate format, and applying windowing. + * The repacking does not shift the data, so can repack V4L2_PIX_FMT_Sxxxx10P + * to V4L2_PIX_FMT_Sxxxx10, or V4L2_PIX_FMT_Sxxxx12P to V4L2_PIX_FMT_Sxxxx12, + * but not generically up to V4L2_PIX_FMT_Sxxxx16. The driver will add both + * formats where the relevant formats are defined, and will automatically + * configure the repacking as required. + * Support for windowing may be added later. + * + * It should be possible to connect this driver to any sensor with a + * suitable output interface and V4L2 subdevice driver. + * + * bcm2835-camera uses the VideoCore firmware to control the sensor, + * Unicam, ISP, and all tuner control loops. Fully processed frames are + * delivered to the driver by the firmware. It only has sensor drivers + * for Omnivision OV5647, and Sony IMX219 sensors. + * + * The two drivers are mutually exclusive for the same Unicam instance. + * The VideoCore firmware checks the device tree configuration during boot. + * If it finds device tree nodes called csi0 or csi1 it will block the + * firmware from accessing the peripheral, and bcm2835-camera will + * not be able to stream data. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#define v4l2_async_nf_add_subdev __v4l2_async_nf_add_subdev + +#include "vc4-regs-unicam.h" + +#define UNICAM_MODULE_NAME "unicam" +#define UNICAM_VERSION "0.1.0" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug level 0-3"); + +#define unicam_dbg(level, dev, fmt, arg...) \ + v4l2_dbg(level, debug, &(dev)->v4l2_dev, fmt, ##arg) +#define unicam_info(dev, fmt, arg...) \ + v4l2_info(&(dev)->v4l2_dev, fmt, ##arg) +#define unicam_err(dev, fmt, arg...) \ + v4l2_err(&(dev)->v4l2_dev, fmt, ##arg) + +/* + * Unicam must request a minimum of 250Mhz from the VPU clock. + * Otherwise the input FIFOs overrun and cause image corruption. + */ +#define MIN_VPU_CLOCK_RATE (250 * 1000 * 1000) +/* + * To protect against a dodgy sensor driver never returning an error from + * enum_mbus_code, set a maximum index value to be used. + */ +#define MAX_ENUM_MBUS_CODE 128 + +/* + * Stride is a 16 bit register, but also has to be a multiple of 32. + */ +#define BPL_ALIGNMENT 32 +#define MAX_BYTESPERLINE ((1 << 16) - BPL_ALIGNMENT) +/* + * Max width is therefore determined by the max stride divided by + * the number of bits per pixel. Take 32bpp as a + * worst case. + * No imposed limit on the height, so adopt a square image for want + * of anything better. + */ +#define MAX_WIDTH (MAX_BYTESPERLINE / 4) +#define MAX_HEIGHT MAX_WIDTH +/* Define a nominal minimum image size */ +#define MIN_WIDTH 16 +#define MIN_HEIGHT 16 +/* Default size of the embedded buffer */ +#define UNICAM_EMBEDDED_SIZE 16384 + +/* + * Size of the dummy buffer. Can be any size really, but the DMA + * allocation works in units of page sizes. + */ +#define DUMMY_BUF_SIZE (PAGE_SIZE) + +#define UNICAM_SD_PAD_SINK 0 +#define UNICAM_SD_PAD_FIRST_SOURCE 1 +#define UNICAM_SD_NUM_SOURCE_PADS 2 +#define UNICAM_SD_NUM_PADS (1 + UNICAM_SD_NUM_SOURCE_PADS) + +static inline bool unicam_sd_pad_is_sink(u32 pad) +{ + /* Camera RX has 1 sink pad, and N source pads */ + return pad == 0; +} + +static inline bool unicam_sd_pad_is_source(u32 pad) +{ + /* Camera RX has 1 sink pad, and N source pads */ + return pad >= UNICAM_SD_PAD_FIRST_SOURCE && + pad <= UNICAM_SD_NUM_SOURCE_PADS; +} + +enum node_types { + IMAGE_NODE, + METADATA_NODE, + MAX_NODES +}; + +#define MASK_CS_DEFAULT BIT(V4L2_COLORSPACE_DEFAULT) +#define MASK_CS_SMPTE170M BIT(V4L2_COLORSPACE_SMPTE170M) +#define MASK_CS_SMPTE240M BIT(V4L2_COLORSPACE_SMPTE240M) +#define MASK_CS_REC709 BIT(V4L2_COLORSPACE_REC709) +#define MASK_CS_BT878 BIT(V4L2_COLORSPACE_BT878) +#define MASK_CS_470_M BIT(V4L2_COLORSPACE_470_SYSTEM_M) +#define MASK_CS_470_BG BIT(V4L2_COLORSPACE_470_SYSTEM_BG) +#define MASK_CS_JPEG BIT(V4L2_COLORSPACE_JPEG) +#define MASK_CS_SRGB BIT(V4L2_COLORSPACE_SRGB) +#define MASK_CS_OPRGB BIT(V4L2_COLORSPACE_OPRGB) +#define MASK_CS_BT2020 BIT(V4L2_COLORSPACE_BT2020) +#define MASK_CS_RAW BIT(V4L2_COLORSPACE_RAW) +#define MASK_CS_DCI_P3 BIT(V4L2_COLORSPACE_DCI_P3) + +#define MAX_COLORSPACE 32 + +/* + * struct unicam_fmt - Unicam media bus format information + * @pixelformat: V4L2 pixel format FCC identifier. 0 if n/a. + * @repacked_fourcc: V4L2 pixel format FCC identifier if the data is expanded + * out to 16bpp. 0 if n/a. + * @code: V4L2 media bus format code. + * @depth: Bits per pixel as delivered from the source. + * @csi_dt: CSI data type. + * @valid_colorspaces: Bitmask of valid colorspaces so that the Media Controller + * centric try_fmt can validate the colorspace and pass + * v4l2-compliance. + * @check_variants: Flag to denote that there are multiple mediabus formats + * still in the list that could match this V4L2 format. + * @mc_skip: Media Controller shouldn't list this format via ENUM_FMT as it is + * a duplicate of an earlier format. + * @metadata_fmt: This format only applies to the metadata pad. + */ +struct unicam_fmt { + u32 fourcc; + u32 repacked_fourcc; + u32 code; + u8 depth; + u8 csi_dt; + u32 valid_colorspaces; + u8 check_variants:1; + u8 mc_skip:1; + u8 metadata_fmt:1; +}; + +static const struct unicam_fmt formats[] = { + /* YUV Formats */ + { + .fourcc = V4L2_PIX_FMT_YUYV, + .code = MEDIA_BUS_FMT_YUYV8_2X8, + .depth = 16, + .csi_dt = 0x1e, + .check_variants = 1, + .valid_colorspaces = MASK_CS_SMPTE170M | MASK_CS_REC709 | + MASK_CS_JPEG, + }, { + .fourcc = V4L2_PIX_FMT_UYVY, + .code = MEDIA_BUS_FMT_UYVY8_2X8, + .depth = 16, + .csi_dt = 0x1e, + .check_variants = 1, + .valid_colorspaces = MASK_CS_SMPTE170M | MASK_CS_REC709 | + MASK_CS_JPEG, + }, { + .fourcc = V4L2_PIX_FMT_YVYU, + .code = MEDIA_BUS_FMT_YVYU8_2X8, + .depth = 16, + .csi_dt = 0x1e, + .check_variants = 1, + .valid_colorspaces = MASK_CS_SMPTE170M | MASK_CS_REC709 | + MASK_CS_JPEG, + }, { + .fourcc = V4L2_PIX_FMT_VYUY, + .code = MEDIA_BUS_FMT_VYUY8_2X8, + .depth = 16, + .csi_dt = 0x1e, + .check_variants = 1, + .valid_colorspaces = MASK_CS_SMPTE170M | MASK_CS_REC709 | + MASK_CS_JPEG, + }, { + .fourcc = V4L2_PIX_FMT_YUYV, + .code = MEDIA_BUS_FMT_YUYV8_1X16, + .depth = 16, + .csi_dt = 0x1e, + .mc_skip = 1, + .valid_colorspaces = MASK_CS_SMPTE170M | MASK_CS_REC709 | + MASK_CS_JPEG, + }, { + .fourcc = V4L2_PIX_FMT_UYVY, + .code = MEDIA_BUS_FMT_UYVY8_1X16, + .depth = 16, + .csi_dt = 0x1e, + .mc_skip = 1, + .valid_colorspaces = MASK_CS_SMPTE170M | MASK_CS_REC709 | + MASK_CS_JPEG, + }, { + .fourcc = V4L2_PIX_FMT_YVYU, + .code = MEDIA_BUS_FMT_YVYU8_1X16, + .depth = 16, + .csi_dt = 0x1e, + .mc_skip = 1, + .valid_colorspaces = MASK_CS_SMPTE170M | MASK_CS_REC709 | + MASK_CS_JPEG, + }, { + .fourcc = V4L2_PIX_FMT_VYUY, + .code = MEDIA_BUS_FMT_VYUY8_1X16, + .depth = 16, + .csi_dt = 0x1e, + .mc_skip = 1, + .valid_colorspaces = MASK_CS_SMPTE170M | MASK_CS_REC709 | + MASK_CS_JPEG, + }, { + /* RGB Formats */ + .fourcc = V4L2_PIX_FMT_RGB565, /* gggbbbbb rrrrrggg */ + .code = MEDIA_BUS_FMT_RGB565_2X8_LE, + .depth = 16, + .csi_dt = 0x22, + .valid_colorspaces = MASK_CS_SRGB, + }, { + .fourcc = V4L2_PIX_FMT_RGB565X, /* rrrrrggg gggbbbbb */ + .code = MEDIA_BUS_FMT_RGB565_2X8_BE, + .depth = 16, + .csi_dt = 0x22, + .valid_colorspaces = MASK_CS_SRGB, + }, { + .fourcc = V4L2_PIX_FMT_RGB555, /* gggbbbbb arrrrrgg */ + .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE, + .depth = 16, + .csi_dt = 0x21, + .valid_colorspaces = MASK_CS_SRGB, + }, { + .fourcc = V4L2_PIX_FMT_RGB555X, /* arrrrrgg gggbbbbb */ + .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE, + .depth = 16, + .csi_dt = 0x21, + .valid_colorspaces = MASK_CS_SRGB, + }, { + .fourcc = V4L2_PIX_FMT_RGB24, /* rgb */ + .code = MEDIA_BUS_FMT_RGB888_1X24, + .depth = 24, + .csi_dt = 0x24, + .valid_colorspaces = MASK_CS_SRGB, + }, { + .fourcc = V4L2_PIX_FMT_BGR24, /* bgr */ + .code = MEDIA_BUS_FMT_BGR888_1X24, + .depth = 24, + .csi_dt = 0x24, + .valid_colorspaces = MASK_CS_SRGB, + }, { + .fourcc = V4L2_PIX_FMT_RGB32, /* argb */ + .code = MEDIA_BUS_FMT_ARGB8888_1X32, + .depth = 32, + .csi_dt = 0x0, + .valid_colorspaces = MASK_CS_SRGB, + }, { + /* Bayer Formats */ + .fourcc = V4L2_PIX_FMT_SBGGR8, + .code = MEDIA_BUS_FMT_SBGGR8_1X8, + .depth = 8, + .csi_dt = 0x2a, + .valid_colorspaces = MASK_CS_RAW, + }, { + .fourcc = V4L2_PIX_FMT_SGBRG8, + .code = MEDIA_BUS_FMT_SGBRG8_1X8, + .depth = 8, + .csi_dt = 0x2a, + .valid_colorspaces = MASK_CS_RAW, + }, { + .fourcc = V4L2_PIX_FMT_SGRBG8, + .code = MEDIA_BUS_FMT_SGRBG8_1X8, + .depth = 8, + .csi_dt = 0x2a, + .valid_colorspaces = MASK_CS_RAW, + }, { + .fourcc = V4L2_PIX_FMT_SRGGB8, + .code = MEDIA_BUS_FMT_SRGGB8_1X8, + .depth = 8, + .csi_dt = 0x2a, + .valid_colorspaces = MASK_CS_RAW, + }, { + .fourcc = V4L2_PIX_FMT_SBGGR10P, + .repacked_fourcc = V4L2_PIX_FMT_SBGGR10, + .code = MEDIA_BUS_FMT_SBGGR10_1X10, + .depth = 10, + .csi_dt = 0x2b, + .valid_colorspaces = MASK_CS_RAW, + }, { + .fourcc = V4L2_PIX_FMT_SGBRG10P, + .repacked_fourcc = V4L2_PIX_FMT_SGBRG10, + .code = MEDIA_BUS_FMT_SGBRG10_1X10, + .depth = 10, + .csi_dt = 0x2b, + .valid_colorspaces = MASK_CS_RAW, + }, { + .fourcc = V4L2_PIX_FMT_SGRBG10P, + .repacked_fourcc = V4L2_PIX_FMT_SGRBG10, + .code = MEDIA_BUS_FMT_SGRBG10_1X10, + .depth = 10, + .csi_dt = 0x2b, + .valid_colorspaces = MASK_CS_RAW, + }, { + .fourcc = V4L2_PIX_FMT_SRGGB10P, + .repacked_fourcc = V4L2_PIX_FMT_SRGGB10, + .code = MEDIA_BUS_FMT_SRGGB10_1X10, + .depth = 10, + .csi_dt = 0x2b, + .valid_colorspaces = MASK_CS_RAW, + }, { + .fourcc = V4L2_PIX_FMT_SBGGR12P, + .repacked_fourcc = V4L2_PIX_FMT_SBGGR12, + .code = MEDIA_BUS_FMT_SBGGR12_1X12, + .depth = 12, + .csi_dt = 0x2c, + .valid_colorspaces = MASK_CS_RAW, + }, { + .fourcc = V4L2_PIX_FMT_SGBRG12P, + .repacked_fourcc = V4L2_PIX_FMT_SGBRG12, + .code = MEDIA_BUS_FMT_SGBRG12_1X12, + .depth = 12, + .csi_dt = 0x2c, + .valid_colorspaces = MASK_CS_RAW, + }, { + .fourcc = V4L2_PIX_FMT_SGRBG12P, + .repacked_fourcc = V4L2_PIX_FMT_SGRBG12, + .code = MEDIA_BUS_FMT_SGRBG12_1X12, + .depth = 12, + .csi_dt = 0x2c, + .valid_colorspaces = MASK_CS_RAW, + }, { + .fourcc = V4L2_PIX_FMT_SRGGB12P, + .repacked_fourcc = V4L2_PIX_FMT_SRGGB12, + .code = MEDIA_BUS_FMT_SRGGB12_1X12, + .depth = 12, + .csi_dt = 0x2c, + .valid_colorspaces = MASK_CS_RAW, + }, { + .fourcc = V4L2_PIX_FMT_SBGGR14P, + .repacked_fourcc = V4L2_PIX_FMT_SBGGR14, + .code = MEDIA_BUS_FMT_SBGGR14_1X14, + .depth = 14, + .csi_dt = 0x2d, + .valid_colorspaces = MASK_CS_RAW, + }, { + .fourcc = V4L2_PIX_FMT_SGBRG14P, + .repacked_fourcc = V4L2_PIX_FMT_SGBRG14, + .code = MEDIA_BUS_FMT_SGBRG14_1X14, + .depth = 14, + .csi_dt = 0x2d, + .valid_colorspaces = MASK_CS_RAW, + }, { + .fourcc = V4L2_PIX_FMT_SGRBG14P, + .repacked_fourcc = V4L2_PIX_FMT_SGRBG14, + .code = MEDIA_BUS_FMT_SGRBG14_1X14, + .depth = 14, + .csi_dt = 0x2d, + .valid_colorspaces = MASK_CS_RAW, + }, { + .fourcc = V4L2_PIX_FMT_SRGGB14P, + .repacked_fourcc = V4L2_PIX_FMT_SRGGB14, + .code = MEDIA_BUS_FMT_SRGGB14_1X14, + .depth = 14, + .csi_dt = 0x2d, + .valid_colorspaces = MASK_CS_RAW, + }, { + /* + * 16 bit Bayer formats could be supported, but there is no CSI2 + * data_type defined for raw 16, and no sensors that produce it at + * present. + */ + + /* Greyscale formats */ + .fourcc = V4L2_PIX_FMT_GREY, + .code = MEDIA_BUS_FMT_Y8_1X8, + .depth = 8, + .csi_dt = 0x2a, + .valid_colorspaces = MASK_CS_RAW, + }, { + .fourcc = V4L2_PIX_FMT_Y10P, + .repacked_fourcc = V4L2_PIX_FMT_Y10, + .code = MEDIA_BUS_FMT_Y10_1X10, + .depth = 10, + .csi_dt = 0x2b, + .valid_colorspaces = MASK_CS_RAW, + }, { + .fourcc = V4L2_PIX_FMT_Y12P, + .repacked_fourcc = V4L2_PIX_FMT_Y12, + .code = MEDIA_BUS_FMT_Y12_1X12, + .depth = 12, + .csi_dt = 0x2c, + .valid_colorspaces = MASK_CS_RAW, + }, { + .fourcc = V4L2_PIX_FMT_Y14P, + .repacked_fourcc = V4L2_PIX_FMT_Y14, + .code = MEDIA_BUS_FMT_Y14_1X14, + .depth = 14, + .csi_dt = 0x2d, + .valid_colorspaces = MASK_CS_RAW, + }, + /* Embedded data format */ + { + .fourcc = V4L2_META_FMT_8, + .code = MEDIA_BUS_FMT_METADATA_8, + .depth = 8, + .metadata_fmt = 1, + } +}; + +struct unicam_buffer { + struct vb2_v4l2_buffer vb; + struct list_head list; +}; + +static inline struct unicam_buffer *to_unicam_buffer(struct vb2_buffer *vb) +{ + return container_of(vb, struct unicam_buffer, vb.vb2_buf); +} + +struct unicam_node { + bool registered; + int open; + bool streaming; + unsigned int node_id; + /* Source pad id on the sensor for this node */ + unsigned int src_pad_id; + /* Pointer pointing to current v4l2_buffer */ + struct unicam_buffer *cur_frm; + /* Pointer pointing to next v4l2_buffer */ + struct unicam_buffer *next_frm; + /* video capture */ + const struct unicam_fmt *fmt; + /* Used to store current pixel format */ + struct v4l2_format v_fmt; + /* Used to store current mbus frame format */ + struct v4l2_mbus_framefmt m_fmt; + /* Buffer queue used in video-buf */ + struct vb2_queue buffer_queue; + /* Queue of filled frames */ + struct list_head dma_queue; + /* IRQ lock for DMA queue */ + spinlock_t dma_queue_lock; + /* lock used to access this structure */ + struct mutex lock; + /* Identifies video device for this channel */ + struct video_device video_dev; + /* Pointer to the parent handle */ + struct unicam_device *dev; + struct media_pad pad; + unsigned int embedded_lines; + struct media_pipeline pipe; + /* + * Dummy buffer intended to be used by unicam + * if we have no other queued buffers to swap to. + */ + void *dummy_buf_cpu_addr; + dma_addr_t dummy_buf_dma_addr; +}; + +struct unicam_device { + struct kref kref; + + /* V4l2 specific parameters */ + struct v4l2_async_subdev asd; + + /* peripheral base address */ + void __iomem *base; + /* clock gating base address */ + void __iomem *clk_gate_base; + /* lp clock handle */ + struct clk *clock; + /* vpu clock handle */ + struct clk *vpu_clock; + /* vpu clock request */ + struct clk_request *vpu_req; + /* clock status for error handling */ + bool clocks_enabled; + /* V4l2 device */ + struct v4l2_device v4l2_dev; + struct media_device mdev; + + /* parent device */ + struct platform_device *pdev; + /* subdevice async Notifier */ + struct v4l2_async_notifier notifier; + unsigned int sequence; + + /* ptr to sub device */ + struct v4l2_subdev *sensor; + /* Pad config for the sensor */ + struct v4l2_subdev_state *sensor_state; + + /* Internal subdev */ + struct v4l2_subdev sd; + struct media_pad pads[UNICAM_SD_NUM_PADS]; + + bool streaming; + + enum v4l2_mbus_type bus_type; + /* + * Stores bus.mipi_csi2.flags for CSI2 sensors, or + * bus.mipi_csi1.strobe for CCP2. + */ + unsigned int bus_flags; + unsigned int max_data_lanes; + unsigned int active_data_lanes; + bool sensor_embedded_data; + + struct unicam_node node[MAX_NODES]; + struct v4l2_ctrl_handler ctrl_handler; + + bool mc_api; +}; + +static inline struct unicam_device * +to_unicam_device(struct v4l2_device *v4l2_dev) +{ + return container_of(v4l2_dev, struct unicam_device, v4l2_dev); +} + +static inline struct unicam_device * +sd_to_unicam_device(struct v4l2_subdev *sd) +{ + return container_of(sd, struct unicam_device, sd); +} + +static inline bool is_metadata_node(struct unicam_node *node) +{ + return node->video_dev.device_caps & V4L2_CAP_META_CAPTURE; +} + +static inline bool is_image_node(struct unicam_node *node) +{ + return node->video_dev.device_caps & V4L2_CAP_VIDEO_CAPTURE; +} + +/* Hardware access */ +static inline void clk_write(struct unicam_device *dev, u32 val) +{ + writel(val | 0x5a000000, dev->clk_gate_base); +} + +static inline u32 reg_read(struct unicam_device *dev, u32 offset) +{ + return readl(dev->base + offset); +} + +static inline void reg_write(struct unicam_device *dev, u32 offset, u32 val) +{ + writel(val, dev->base + offset); +} + +static inline int get_field(u32 value, u32 mask) +{ + return (value & mask) >> __ffs(mask); +} + +static inline void set_field(u32 *valp, u32 field, u32 mask) +{ + u32 val = *valp; + + val &= ~mask; + val |= (field << __ffs(mask)) & mask; + *valp = val; +} + +static inline u32 reg_read_field(struct unicam_device *dev, u32 offset, + u32 mask) +{ + return get_field(reg_read(dev, offset), mask); +} + +static inline void reg_write_field(struct unicam_device *dev, u32 offset, + u32 field, u32 mask) +{ + u32 val = reg_read(dev, offset); + + set_field(&val, field, mask); + reg_write(dev, offset, val); +} + +/* Power management functions */ +static inline int unicam_runtime_get(struct unicam_device *dev) +{ + return pm_runtime_get_sync(&dev->pdev->dev); +} + +static inline void unicam_runtime_put(struct unicam_device *dev) +{ + pm_runtime_put_sync(&dev->pdev->dev); +} + +/* Format setup functions */ +static const struct unicam_fmt *find_format_by_code(u32 code) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(formats); i++) { + if (formats[i].code == code) + return &formats[i]; + } + + return NULL; +} + +static const struct unicam_fmt *find_format_by_fourcc(u32 fourcc) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(formats); ++i) { + if (formats[i].fourcc == fourcc) + return &formats[i]; + } + + return NULL; +} + +static unsigned int bytes_per_line(u32 width, const struct unicam_fmt *fmt, + u32 v4l2_fourcc) +{ + if (v4l2_fourcc == fmt->repacked_fourcc) + /* Repacking always goes to 16bpp */ + return ALIGN(width << 1, BPL_ALIGNMENT); + else + return ALIGN((width * fmt->depth) >> 3, BPL_ALIGNMENT); +} + +static int unicam_calc_format_size_bpl(struct unicam_device *dev, + const struct unicam_fmt *fmt, + struct v4l2_format *f) +{ + unsigned int min_bytesperline; + + v4l_bound_align_image(&f->fmt.pix.width, MIN_WIDTH, MAX_WIDTH, 2, + &f->fmt.pix.height, MIN_HEIGHT, MAX_HEIGHT, 0, + 0); + + min_bytesperline = bytes_per_line(f->fmt.pix.width, fmt, + f->fmt.pix.pixelformat); + + if (f->fmt.pix.bytesperline > min_bytesperline && + f->fmt.pix.bytesperline <= MAX_BYTESPERLINE) + f->fmt.pix.bytesperline = ALIGN(f->fmt.pix.bytesperline, + BPL_ALIGNMENT); + else + f->fmt.pix.bytesperline = min_bytesperline; + + f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline; + + unicam_dbg(3, dev, "%s: fourcc: %08X size: %dx%d bpl:%d img_size:%d\n", + __func__, + f->fmt.pix.pixelformat, + f->fmt.pix.width, f->fmt.pix.height, + f->fmt.pix.bytesperline, f->fmt.pix.sizeimage); + + return 0; +} + +static void unicam_wr_dma_addr(struct unicam_device *dev, dma_addr_t dmaaddr, + unsigned int buffer_size, int node_id) +{ + dma_addr_t endaddr = dmaaddr + buffer_size; + + if (node_id == IMAGE_NODE) { + reg_write(dev, UNICAM_IBSA0, dmaaddr); + reg_write(dev, UNICAM_IBEA0, endaddr); + } else { + reg_write(dev, UNICAM_DBSA0, dmaaddr); + reg_write(dev, UNICAM_DBEA0, endaddr); + } +} + +static unsigned int unicam_get_lines_done(struct unicam_device *dev) +{ + dma_addr_t start_addr, cur_addr; + unsigned int stride = dev->node[IMAGE_NODE].v_fmt.fmt.pix.bytesperline; + struct unicam_buffer *frm = dev->node[IMAGE_NODE].cur_frm; + + if (!frm) + return 0; + + start_addr = vb2_dma_contig_plane_dma_addr(&frm->vb.vb2_buf, 0); + cur_addr = reg_read(dev, UNICAM_IBWP); + return (unsigned int)(cur_addr - start_addr) / stride; +} + +static void unicam_schedule_next_buffer(struct unicam_node *node) +{ + struct unicam_device *dev = node->dev; + struct unicam_buffer *buf; + unsigned int size; + dma_addr_t addr; + + buf = list_first_entry(&node->dma_queue, struct unicam_buffer, list); + node->next_frm = buf; + list_del(&buf->list); + + addr = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0); + if (is_image_node(node)) { + size = node->v_fmt.fmt.pix.sizeimage; + unicam_wr_dma_addr(dev, addr, size, IMAGE_NODE); + } else { + size = node->v_fmt.fmt.meta.buffersize; + unicam_wr_dma_addr(dev, addr, size, METADATA_NODE); + } +} + +static void unicam_schedule_dummy_buffer(struct unicam_node *node) +{ + struct unicam_device *dev = node->dev; + int node_id = is_image_node(node) ? IMAGE_NODE : METADATA_NODE; + + unicam_dbg(3, dev, "Scheduling dummy buffer for node %d\n", node_id); + + unicam_wr_dma_addr(dev, node->dummy_buf_dma_addr, DUMMY_BUF_SIZE, + node_id); + node->next_frm = NULL; +} + +static void unicam_process_buffer_complete(struct unicam_node *node, + unsigned int sequence) +{ + node->cur_frm->vb.field = node->m_fmt.field; + node->cur_frm->vb.sequence = sequence; + + vb2_buffer_done(&node->cur_frm->vb.vb2_buf, VB2_BUF_STATE_DONE); +} + +static void unicam_queue_event_sof(struct unicam_device *unicam) +{ + struct v4l2_event event = { + .type = V4L2_EVENT_FRAME_SYNC, + .u.frame_sync.frame_sequence = unicam->sequence, + }; + + v4l2_event_queue(&unicam->node[IMAGE_NODE].video_dev, &event); +} + +/* + * unicam_isr : ISR handler for unicam capture + * @irq: irq number + * @dev_id: dev_id ptr + * + * It changes status of the captured buffer, takes next buffer from the queue + * and sets its address in unicam registers + */ +static irqreturn_t unicam_isr(int irq, void *dev) +{ + struct unicam_device *unicam = dev; + unsigned int lines_done = unicam_get_lines_done(dev); + unsigned int sequence = unicam->sequence; + unsigned int i; + u32 ista, sta; + bool fe; + u64 ts; + + sta = reg_read(unicam, UNICAM_STA); + /* Write value back to clear the interrupts */ + reg_write(unicam, UNICAM_STA, sta); + + ista = reg_read(unicam, UNICAM_ISTA); + /* Write value back to clear the interrupts */ + reg_write(unicam, UNICAM_ISTA, ista); + + unicam_dbg(3, unicam, "ISR: ISTA: 0x%X, STA: 0x%X, sequence %d, lines done %d", + ista, sta, sequence, lines_done); + + if (!(sta & (UNICAM_IS | UNICAM_PI0))) + return IRQ_HANDLED; + + /* + * Look for either the Frame End interrupt or the Packet Capture status + * to signal a frame end. + */ + fe = (ista & UNICAM_FEI || sta & UNICAM_PI0); + + /* + * We must run the frame end handler first. If we have a valid next_frm + * and we get a simultaneout FE + FS interrupt, running the FS handler + * first would null out the next_frm ptr and we would have lost the + * buffer forever. + */ + if (fe) { + /* + * Ensure we have swapped buffers already as we can't + * stop the peripheral. If no buffer is available, use a + * dummy buffer to dump out frames until we get a new buffer + * to use. + */ + for (i = 0; i < ARRAY_SIZE(unicam->node); i++) { + if (!unicam->node[i].streaming) + continue; + + /* + * If cur_frm == next_frm, it means we have not had + * a chance to swap buffers, likely due to having + * multiple interrupts occurring simultaneously (like FE + * + FS + LS). In this case, we cannot signal the buffer + * as complete, as the HW will reuse that buffer. + */ + if (unicam->node[i].cur_frm && + unicam->node[i].cur_frm != unicam->node[i].next_frm) + unicam_process_buffer_complete(&unicam->node[i], + sequence); + unicam->node[i].cur_frm = unicam->node[i].next_frm; + } + unicam->sequence++; + } + + if (ista & UNICAM_FSI) { + /* + * Timestamp is to be when the first data byte was captured, + * aka frame start. + */ + ts = ktime_get_ns(); + for (i = 0; i < ARRAY_SIZE(unicam->node); i++) { + if (!unicam->node[i].streaming) + continue; + + if (unicam->node[i].cur_frm) + unicam->node[i].cur_frm->vb.vb2_buf.timestamp = + ts; + else + unicam_dbg(2, unicam, "ISR: [%d] Dropping frame, buffer not available at FS\n", + i); + /* + * Set the next frame output to go to a dummy frame + * if we have not managed to obtain another frame + * from the queue. + */ + unicam_schedule_dummy_buffer(&unicam->node[i]); + } + + unicam_queue_event_sof(unicam); + } + + /* + * Cannot swap buffer at frame end, there may be a race condition + * where the HW does not actually swap it if the new frame has + * already started. + */ + if (ista & (UNICAM_FSI | UNICAM_LCI) && !fe) { + for (i = 0; i < ARRAY_SIZE(unicam->node); i++) { + if (!unicam->node[i].streaming) + continue; + + spin_lock(&unicam->node[i].dma_queue_lock); + if (!list_empty(&unicam->node[i].dma_queue) && + !unicam->node[i].next_frm) + unicam_schedule_next_buffer(&unicam->node[i]); + spin_unlock(&unicam->node[i].dma_queue_lock); + } + } + + if (reg_read(unicam, UNICAM_ICTL) & UNICAM_FCM) { + /* Switch out of trigger mode if selected */ + reg_write_field(unicam, UNICAM_ICTL, 1, UNICAM_TFC); + reg_write_field(unicam, UNICAM_ICTL, 0, UNICAM_FCM); + } + return IRQ_HANDLED; +} + +/* V4L2 Common IOCTLs */ +static int unicam_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct unicam_node *node = video_drvdata(file); + struct unicam_device *dev = node->dev; + + strscpy(cap->driver, UNICAM_MODULE_NAME, sizeof(cap->driver)); + strscpy(cap->card, UNICAM_MODULE_NAME, sizeof(cap->card)); + + snprintf(cap->bus_info, sizeof(cap->bus_info), + "platform:%s", dev_name(&dev->pdev->dev)); + + cap->capabilities |= V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_META_CAPTURE; + + return 0; +} + +static int unicam_log_status(struct file *file, void *fh) +{ + struct unicam_node *node = video_drvdata(file); + struct unicam_device *dev = node->dev; + u32 reg; + + /* status for sub devices */ + v4l2_device_call_all(&dev->v4l2_dev, 0, core, log_status); + + unicam_info(dev, "-----Receiver status-----\n"); + unicam_info(dev, "V4L2 width/height: %ux%u\n", + node->v_fmt.fmt.pix.width, node->v_fmt.fmt.pix.height); + unicam_info(dev, "Mediabus format: %08x\n", node->fmt->code); + unicam_info(dev, "V4L2 format: %08x\n", + node->v_fmt.fmt.pix.pixelformat); + reg = reg_read(dev, UNICAM_IPIPE); + unicam_info(dev, "Unpacking/packing: %u / %u\n", + get_field(reg, UNICAM_PUM_MASK), + get_field(reg, UNICAM_PPM_MASK)); + unicam_info(dev, "----Live data----\n"); + unicam_info(dev, "Programmed stride: %4u\n", + reg_read(dev, UNICAM_IBLS)); + unicam_info(dev, "Detected resolution: %ux%u\n", + reg_read(dev, UNICAM_IHSTA), + reg_read(dev, UNICAM_IVSTA)); + unicam_info(dev, "Write pointer: %08x\n", + reg_read(dev, UNICAM_IBWP)); + + return 0; +} + +static int unicam_subscribe_event(struct v4l2_fh *fh, + const struct v4l2_event_subscription *sub) +{ + switch (sub->type) { + case V4L2_EVENT_FRAME_SYNC: + return v4l2_event_subscribe(fh, sub, 2, NULL); + case V4L2_EVENT_SOURCE_CHANGE: + return v4l2_event_subscribe(fh, sub, 4, NULL); + } + + return v4l2_ctrl_subscribe_event(fh, sub); +} + +static void unicam_notify(struct v4l2_subdev *sd, + unsigned int notification, void *arg) +{ + struct unicam_device *dev = to_unicam_device(sd->v4l2_dev); + + switch (notification) { + case V4L2_DEVICE_NOTIFY_EVENT: + v4l2_event_queue(&dev->node[IMAGE_NODE].video_dev, arg); + break; + default: + break; + } +} + +/* V4L2 Media Controller Centric IOCTLs */ + +static int unicam_mc_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + int i, j; + + for (i = 0, j = 0; i < ARRAY_SIZE(formats); i++) { + if (f->mbus_code && formats[i].code != f->mbus_code) + continue; + if (formats[i].mc_skip || formats[i].metadata_fmt) + continue; + + if (formats[i].fourcc) { + if (j == f->index) { + f->pixelformat = formats[i].fourcc; + f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + return 0; + } + j++; + } + if (formats[i].repacked_fourcc) { + if (j == f->index) { + f->pixelformat = formats[i].repacked_fourcc; + f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + return 0; + } + j++; + } + } + + return -EINVAL; +} + +static int unicam_mc_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct unicam_node *node = video_drvdata(file); + + if (!is_image_node(node)) + return -EINVAL; + + *f = node->v_fmt; + + return 0; +} + +static void unicam_mc_try_fmt(struct unicam_node *node, struct v4l2_format *f, + const struct unicam_fmt **ret_fmt) +{ + struct v4l2_pix_format *v4l2_format = &f->fmt.pix; + struct unicam_device *dev = node->dev; + const struct unicam_fmt *fmt; + int is_rgb; + + /* + * Default to the first format if the requested pixel format code isn't + * supported. + */ + fmt = find_format_by_fourcc(v4l2_format->pixelformat); + if (!fmt) { + fmt = &formats[0]; + v4l2_format->pixelformat = fmt->fourcc; + } + + unicam_calc_format_size_bpl(dev, fmt, f); + + if (v4l2_format->field == V4L2_FIELD_ANY) + v4l2_format->field = V4L2_FIELD_NONE; + + if (v4l2_format->colorspace >= MAX_COLORSPACE || + !(fmt->valid_colorspaces & (1 << v4l2_format->colorspace))) { + v4l2_format->colorspace = __ffs(fmt->valid_colorspaces); + + v4l2_format->xfer_func = + V4L2_MAP_XFER_FUNC_DEFAULT(v4l2_format->colorspace); + v4l2_format->ycbcr_enc = + V4L2_MAP_YCBCR_ENC_DEFAULT(v4l2_format->colorspace); + is_rgb = v4l2_format->colorspace == V4L2_COLORSPACE_SRGB; + v4l2_format->quantization = + V4L2_MAP_QUANTIZATION_DEFAULT(is_rgb, + v4l2_format->colorspace, + v4l2_format->ycbcr_enc); + } + + if (ret_fmt) + *ret_fmt = fmt; + + unicam_dbg(3, dev, "%s: %08x %ux%u (bytesperline %u sizeimage %u)\n", + __func__, v4l2_format->pixelformat, + v4l2_format->width, v4l2_format->height, + v4l2_format->bytesperline, v4l2_format->sizeimage); +} + +static int unicam_mc_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct unicam_node *node = video_drvdata(file); + + unicam_mc_try_fmt(node, f, NULL); + return 0; +} + +static int unicam_mc_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct unicam_node *node = video_drvdata(file); + struct unicam_device *dev = node->dev; + const struct unicam_fmt *fmt; + + if (vb2_is_busy(&node->buffer_queue)) { + unicam_dbg(3, dev, "%s device busy\n", __func__); + return -EBUSY; + } + + unicam_mc_try_fmt(node, f, &fmt); + + node->v_fmt = *f; + node->fmt = fmt; + + return 0; +} + +static int unicam_mc_enum_framesizes(struct file *file, void *fh, + struct v4l2_frmsizeenum *fsize) +{ + struct unicam_node *node = video_drvdata(file); + struct unicam_device *dev = node->dev; + + if (fsize->index > 0) + return -EINVAL; + + if (!find_format_by_fourcc(fsize->pixel_format)) { + unicam_dbg(3, dev, "Invalid pixel format 0x%08x\n", + fsize->pixel_format); + return -EINVAL; + } + + fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE; + fsize->stepwise.min_width = MIN_WIDTH; + fsize->stepwise.max_width = MAX_WIDTH; + fsize->stepwise.step_width = 1; + fsize->stepwise.min_height = MIN_HEIGHT; + fsize->stepwise.max_height = MAX_HEIGHT; + fsize->stepwise.step_height = 1; + + return 0; +} + +static int unicam_mc_enum_fmt_meta_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + struct unicam_node *node = video_drvdata(file); + int i, j; + + if (!is_metadata_node(node)) + return -EINVAL; + + for (i = 0, j = 0; i < ARRAY_SIZE(formats); i++) { + if (f->mbus_code && formats[i].code != f->mbus_code) + continue; + if (!formats[i].metadata_fmt) + continue; + + if (formats[i].fourcc) { + if (j == f->index) { + f->pixelformat = formats[i].fourcc; + f->type = V4L2_BUF_TYPE_META_CAPTURE; + return 0; + } + j++; + } + } + + return -EINVAL; +} + +static int unicam_mc_g_fmt_meta_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct unicam_node *node = video_drvdata(file); + + if (!is_metadata_node(node)) + return -EINVAL; + + *f = node->v_fmt; + + return 0; +} + +static int unicam_mc_try_fmt_meta_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct unicam_node *node = video_drvdata(file); + + if (!is_metadata_node(node)) + return -EINVAL; + + f->fmt.meta.dataformat = V4L2_META_FMT_8; + + return 0; +} + +static int unicam_mc_s_fmt_meta_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct unicam_node *node = video_drvdata(file); + + if (!is_metadata_node(node)) + return -EINVAL; + + unicam_mc_try_fmt_meta_cap(file, priv, f); + + node->v_fmt = *f; + + return 0; +} + +static const struct v4l2_ioctl_ops unicam_mc_ioctl_ops = { + .vidioc_querycap = unicam_querycap, + .vidioc_enum_fmt_vid_cap = unicam_mc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = unicam_mc_g_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = unicam_mc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = unicam_mc_s_fmt_vid_cap, + + .vidioc_enum_fmt_meta_cap = unicam_mc_enum_fmt_meta_cap, + .vidioc_g_fmt_meta_cap = unicam_mc_g_fmt_meta_cap, + .vidioc_try_fmt_meta_cap = unicam_mc_try_fmt_meta_cap, + .vidioc_s_fmt_meta_cap = unicam_mc_s_fmt_meta_cap, + + .vidioc_enum_framesizes = unicam_mc_enum_framesizes, + .vidioc_reqbufs = vb2_ioctl_reqbufs, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_expbuf = vb2_ioctl_expbuf, + .vidioc_streamon = vb2_ioctl_streamon, + .vidioc_streamoff = vb2_ioctl_streamoff, + + .vidioc_log_status = unicam_log_status, + .vidioc_subscribe_event = unicam_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +static const struct media_entity_operations unicam_mc_entity_ops = { + .link_validate = v4l2_subdev_link_validate, + .has_route = v4l2_subdev_has_route, +}; + +/* videobuf2 Operations */ + +static int unicam_queue_setup(struct vb2_queue *vq, + unsigned int *nbuffers, + unsigned int *nplanes, + unsigned int sizes[], + struct device *alloc_devs[]) +{ + struct unicam_node *node = vb2_get_drv_priv(vq); + struct unicam_device *dev = node->dev; + unsigned int size = is_image_node(node) ? + node->v_fmt.fmt.pix.sizeimage : + node->v_fmt.fmt.meta.buffersize; + + if (vq->num_buffers + *nbuffers < 3) + *nbuffers = 3 - vq->num_buffers; + + if (*nplanes) { + if (sizes[0] < size) { + unicam_err(dev, "sizes[0] %i < size %u\n", sizes[0], + size); + return -EINVAL; + } + size = sizes[0]; + } + + *nplanes = 1; + sizes[0] = size; + + return 0; +} + +static int unicam_buffer_prepare(struct vb2_buffer *vb) +{ + struct unicam_node *node = vb2_get_drv_priv(vb->vb2_queue); + struct unicam_device *dev = node->dev; + struct unicam_buffer *buf = to_unicam_buffer(vb); + unsigned long size; + + if (WARN_ON(!node->fmt)) + return -EINVAL; + + size = is_image_node(node) ? node->v_fmt.fmt.pix.sizeimage : + node->v_fmt.fmt.meta.buffersize; + if (vb2_plane_size(vb, 0) < size) { + unicam_err(dev, "data will not fit into plane (%lu < %lu)\n", + vb2_plane_size(vb, 0), size); + return -EINVAL; + } + + vb2_set_plane_payload(&buf->vb.vb2_buf, 0, size); + return 0; +} + +static void unicam_buffer_queue(struct vb2_buffer *vb) +{ + struct unicam_node *node = vb2_get_drv_priv(vb->vb2_queue); + struct unicam_buffer *buf = to_unicam_buffer(vb); + unsigned long flags; + + spin_lock_irqsave(&node->dma_queue_lock, flags); + list_add_tail(&buf->list, &node->dma_queue); + spin_unlock_irqrestore(&node->dma_queue_lock, flags); +} + +static void unicam_set_packing_config(struct unicam_device *dev) +{ + u32 pack, unpack; + u32 val; + + if (dev->node[IMAGE_NODE].v_fmt.fmt.pix.pixelformat == + dev->node[IMAGE_NODE].fmt->fourcc) { + unpack = UNICAM_PUM_NONE; + pack = UNICAM_PPM_NONE; + } else { + switch (dev->node[IMAGE_NODE].fmt->depth) { + case 8: + unpack = UNICAM_PUM_UNPACK8; + break; + case 10: + unpack = UNICAM_PUM_UNPACK10; + break; + case 12: + unpack = UNICAM_PUM_UNPACK12; + break; + case 14: + unpack = UNICAM_PUM_UNPACK14; + break; + case 16: + unpack = UNICAM_PUM_UNPACK16; + break; + default: + unpack = UNICAM_PUM_NONE; + break; + } + + /* Repacking is always to 16bpp */ + pack = UNICAM_PPM_PACK16; + } + + val = 0; + set_field(&val, unpack, UNICAM_PUM_MASK); + set_field(&val, pack, UNICAM_PPM_MASK); + reg_write(dev, UNICAM_IPIPE, val); +} + +static void unicam_cfg_image_id(struct unicam_device *dev) +{ + if (dev->bus_type == V4L2_MBUS_CSI2_DPHY) { + /* CSI2 mode, hardcode VC 0 for now. */ + reg_write(dev, UNICAM_IDI0, + (0 << 6) | dev->node[IMAGE_NODE].fmt->csi_dt); + } else { + /* CCP2 mode */ + reg_write(dev, UNICAM_IDI0, + 0x80 | dev->node[IMAGE_NODE].fmt->csi_dt); + } +} + +static void unicam_enable_ed(struct unicam_device *dev) +{ + u32 val = reg_read(dev, UNICAM_DCS); + + set_field(&val, 2, UNICAM_EDL_MASK); + /* Do not wrap at the end of the embedded data buffer */ + set_field(&val, 0, UNICAM_DBOB); + + reg_write(dev, UNICAM_DCS, val); +} + +static void unicam_start_rx(struct unicam_device *dev, dma_addr_t *addr) +{ + int line_int_freq = dev->node[IMAGE_NODE].v_fmt.fmt.pix.height >> 2; + unsigned int size, i; + u32 val; + + if (line_int_freq < 128) + line_int_freq = 128; + + /* Enable lane clocks */ + val = 1; + for (i = 0; i < dev->active_data_lanes; i++) + val = val << 2 | 1; + clk_write(dev, val); + + /* Basic init */ + reg_write(dev, UNICAM_CTRL, UNICAM_MEM); + + /* Enable analogue control, and leave in reset. */ + val = UNICAM_AR; + set_field(&val, 7, UNICAM_CTATADJ_MASK); + set_field(&val, 7, UNICAM_PTATADJ_MASK); + reg_write(dev, UNICAM_ANA, val); + usleep_range(1000, 2000); + + /* Come out of reset */ + reg_write_field(dev, UNICAM_ANA, 0, UNICAM_AR); + + /* Peripheral reset */ + reg_write_field(dev, UNICAM_CTRL, 1, UNICAM_CPR); + reg_write_field(dev, UNICAM_CTRL, 0, UNICAM_CPR); + + reg_write_field(dev, UNICAM_CTRL, 0, UNICAM_CPE); + + /* Enable Rx control. */ + val = reg_read(dev, UNICAM_CTRL); + if (dev->bus_type == V4L2_MBUS_CSI2_DPHY) { + set_field(&val, UNICAM_CPM_CSI2, UNICAM_CPM_MASK); + set_field(&val, UNICAM_DCM_STROBE, UNICAM_DCM_MASK); + } else { + set_field(&val, UNICAM_CPM_CCP2, UNICAM_CPM_MASK); + set_field(&val, dev->bus_flags, UNICAM_DCM_MASK); + } + /* Packet framer timeout */ + set_field(&val, 0xf, UNICAM_PFT_MASK); + set_field(&val, 128, UNICAM_OET_MASK); + reg_write(dev, UNICAM_CTRL, val); + + reg_write(dev, UNICAM_IHWIN, 0); + reg_write(dev, UNICAM_IVWIN, 0); + + /* AXI bus access QoS setup */ + val = reg_read(dev, UNICAM_PRI); + set_field(&val, 0, UNICAM_BL_MASK); + set_field(&val, 0, UNICAM_BS_MASK); + set_field(&val, 0xe, UNICAM_PP_MASK); + set_field(&val, 8, UNICAM_NP_MASK); + set_field(&val, 2, UNICAM_PT_MASK); + set_field(&val, 1, UNICAM_PE); + reg_write(dev, UNICAM_PRI, val); + + reg_write_field(dev, UNICAM_ANA, 0, UNICAM_DDL); + + /* Always start in trigger frame capture mode (UNICAM_FCM set) */ + val = UNICAM_FSIE | UNICAM_FEIE | UNICAM_FCM | UNICAM_IBOB; + set_field(&val, line_int_freq, UNICAM_LCIE_MASK); + reg_write(dev, UNICAM_ICTL, val); + reg_write(dev, UNICAM_STA, UNICAM_STA_MASK_ALL); + reg_write(dev, UNICAM_ISTA, UNICAM_ISTA_MASK_ALL); + + /* tclk_term_en */ + reg_write_field(dev, UNICAM_CLT, 2, UNICAM_CLT1_MASK); + /* tclk_settle */ + reg_write_field(dev, UNICAM_CLT, 6, UNICAM_CLT2_MASK); + /* td_term_en */ + reg_write_field(dev, UNICAM_DLT, 2, UNICAM_DLT1_MASK); + /* ths_settle */ + reg_write_field(dev, UNICAM_DLT, 6, UNICAM_DLT2_MASK); + /* trx_enable */ + reg_write_field(dev, UNICAM_DLT, 0, UNICAM_DLT3_MASK); + + reg_write_field(dev, UNICAM_CTRL, 0, UNICAM_SOE); + + /* Packet compare setup - required to avoid missing frame ends */ + val = 0; + set_field(&val, 1, UNICAM_PCE); + set_field(&val, 1, UNICAM_GI); + set_field(&val, 1, UNICAM_CPH); + set_field(&val, 0, UNICAM_PCVC_MASK); + set_field(&val, 1, UNICAM_PCDT_MASK); + reg_write(dev, UNICAM_CMP0, val); + + /* Enable clock lane and set up terminations */ + val = 0; + if (dev->bus_type == V4L2_MBUS_CSI2_DPHY) { + /* CSI2 */ + set_field(&val, 1, UNICAM_CLE); + set_field(&val, 1, UNICAM_CLLPE); + if (dev->bus_flags & V4L2_MBUS_CSI2_CONTINUOUS_CLOCK) { + set_field(&val, 1, UNICAM_CLTRE); + set_field(&val, 1, UNICAM_CLHSE); + } + } else { + /* CCP2 */ + set_field(&val, 1, UNICAM_CLE); + set_field(&val, 1, UNICAM_CLHSE); + set_field(&val, 1, UNICAM_CLTRE); + } + reg_write(dev, UNICAM_CLK, val); + + /* + * Enable required data lanes with appropriate terminations. + * The same value needs to be written to UNICAM_DATn registers for + * the active lanes, and 0 for inactive ones. + */ + val = 0; + if (dev->bus_type == V4L2_MBUS_CSI2_DPHY) { + /* CSI2 */ + set_field(&val, 1, UNICAM_DLE); + set_field(&val, 1, UNICAM_DLLPE); + if (dev->bus_flags & V4L2_MBUS_CSI2_CONTINUOUS_CLOCK) { + set_field(&val, 1, UNICAM_DLTRE); + set_field(&val, 1, UNICAM_DLHSE); + } + } else { + /* CCP2 */ + set_field(&val, 1, UNICAM_DLE); + set_field(&val, 1, UNICAM_DLHSE); + set_field(&val, 1, UNICAM_DLTRE); + } + reg_write(dev, UNICAM_DAT0, val); + + if (dev->active_data_lanes == 1) + val = 0; + reg_write(dev, UNICAM_DAT1, val); + + if (dev->max_data_lanes > 2) { + /* + * Registers UNICAM_DAT2 and UNICAM_DAT3 only valid if the + * instance supports more than 2 data lanes. + */ + if (dev->active_data_lanes == 2) + val = 0; + reg_write(dev, UNICAM_DAT2, val); + + if (dev->active_data_lanes == 3) + val = 0; + reg_write(dev, UNICAM_DAT3, val); + } + + reg_write(dev, UNICAM_IBLS, + dev->node[IMAGE_NODE].v_fmt.fmt.pix.bytesperline); + size = dev->node[IMAGE_NODE].v_fmt.fmt.pix.sizeimage; + unicam_wr_dma_addr(dev, addr[IMAGE_NODE], size, IMAGE_NODE); + unicam_set_packing_config(dev); + unicam_cfg_image_id(dev); + + val = reg_read(dev, UNICAM_MISC); + set_field(&val, 1, UNICAM_FL0); + set_field(&val, 1, UNICAM_FL1); + reg_write(dev, UNICAM_MISC, val); + + if (dev->node[METADATA_NODE].streaming && dev->sensor_embedded_data) { + unicam_dbg(3, dev, "enable metadata dma\n"); + size = dev->node[METADATA_NODE].v_fmt.fmt.meta.buffersize; + unicam_enable_ed(dev); + unicam_wr_dma_addr(dev, addr[METADATA_NODE], size, METADATA_NODE); + } + + /* Enable peripheral */ + reg_write_field(dev, UNICAM_CTRL, 1, UNICAM_CPE); + + /* Load image pointers */ + reg_write_field(dev, UNICAM_ICTL, 1, UNICAM_LIP_MASK); + + /* Load embedded data buffer pointers if needed */ + if (dev->node[METADATA_NODE].streaming && dev->sensor_embedded_data) + reg_write_field(dev, UNICAM_DCS, 1, UNICAM_LDP); + + /* + * Enable trigger only for the first frame to + * sync correctly to the FS from the source. + */ + reg_write_field(dev, UNICAM_ICTL, 1, UNICAM_TFC); +} + +static void unicam_disable(struct unicam_device *dev) +{ + /* Analogue lane control disable */ + reg_write_field(dev, UNICAM_ANA, 1, UNICAM_DDL); + + /* Stop the output engine */ + reg_write_field(dev, UNICAM_CTRL, 1, UNICAM_SOE); + + /* Disable the data lanes. */ + reg_write(dev, UNICAM_DAT0, 0); + reg_write(dev, UNICAM_DAT1, 0); + + if (dev->max_data_lanes > 2) { + reg_write(dev, UNICAM_DAT2, 0); + reg_write(dev, UNICAM_DAT3, 0); + } + + /* Peripheral reset */ + reg_write_field(dev, UNICAM_CTRL, 1, UNICAM_CPR); + usleep_range(50, 100); + reg_write_field(dev, UNICAM_CTRL, 0, UNICAM_CPR); + + /* Disable peripheral */ + reg_write_field(dev, UNICAM_CTRL, 0, UNICAM_CPE); + + /* Clear ED setup */ + reg_write(dev, UNICAM_DCS, 0); + + /* Disable all lane clocks */ + clk_write(dev, 0); +} + +static void unicam_return_buffers(struct unicam_node *node, + enum vb2_buffer_state state) +{ + struct unicam_buffer *buf, *tmp; + unsigned long flags; + + spin_lock_irqsave(&node->dma_queue_lock, flags); + list_for_each_entry_safe(buf, tmp, &node->dma_queue, list) { + list_del(&buf->list); + vb2_buffer_done(&buf->vb.vb2_buf, state); + } + + if (node->cur_frm) + vb2_buffer_done(&node->cur_frm->vb.vb2_buf, + state); + if (node->next_frm && node->cur_frm != node->next_frm) + vb2_buffer_done(&node->next_frm->vb.vb2_buf, + state); + + node->cur_frm = NULL; + node->next_frm = NULL; + spin_unlock_irqrestore(&node->dma_queue_lock, flags); +} + +static int unicam_video_check_format(struct unicam_node *node) +{ + const struct v4l2_mbus_framefmt *format; + struct media_pad *remote_pad; + struct v4l2_subdev_state *state; + int ret = 0; + + remote_pad = media_entity_remote_pad(&node->pad); + if (!remote_pad) + return -ENODEV; + + state = v4l2_subdev_lock_active_state(node->dev->sensor); + + format = v4l2_state_get_stream_format(state, + remote_pad->index, 0); + if (!format) { + ret = -EINVAL; + goto out; + } + + if (node->fmt->code != format->code || + node->v_fmt.fmt.pix.height != format->height || + node->v_fmt.fmt.pix.width != format->width || + node->v_fmt.fmt.pix.field != format->field) { + ret = -EPIPE; + goto out; + } + +out: + v4l2_subdev_unlock_state(state); + + return ret; +} + +static int unicam_start_streaming(struct vb2_queue *vq, unsigned int count) +{ + struct unicam_node *node = vb2_get_drv_priv(vq); + struct unicam_device *dev = node->dev; + dma_addr_t buffer_addr[MAX_NODES] = { 0 }; + struct unicam_buffer *buf; + unsigned long flags; + unsigned int i; + int ret; + + node->streaming = true; + + dev->sequence = 0; + ret = unicam_runtime_get(dev); + if (ret < 0) { + unicam_dbg(3, dev, "unicam_runtime_get failed\n"); + goto err_streaming; + } + + ret = media_pipeline_start(node->video_dev.entity.pads, &node->pipe); + if (ret < 0) { + unicam_err(dev, "Failed to start media pipeline: %d\n", ret); + goto err_pm_put; + } + + dev->active_data_lanes = dev->max_data_lanes; + + unicam_video_check_format(node); + + unicam_dbg(1, dev, "Running with %u data lanes\n", + dev->active_data_lanes); + + ret = clk_set_min_rate(dev->vpu_clock, MIN_VPU_CLOCK_RATE); + if (ret) { + unicam_err(dev, "failed to set up VPU clock\n"); + goto error_pipeline; + } + + ret = clk_prepare_enable(dev->vpu_clock); + if (ret) { + unicam_err(dev, "Failed to enable VPU clock: %d\n", ret); + goto error_pipeline; + } + + ret = clk_set_rate(dev->clock, 100 * 1000 * 1000); + if (ret) { + unicam_err(dev, "failed to set up CSI clock\n"); + goto err_vpu_clock; + } + + ret = clk_prepare_enable(dev->clock); + if (ret) { + unicam_err(dev, "Failed to enable CSI clock: %d\n", ret); + goto err_vpu_clock; + } + + unicam_dbg(3, dev, "node %s\n", node->video_dev.name); + + spin_lock_irqsave(&node->dma_queue_lock, flags); + buf = list_first_entry(&node->dma_queue, + struct unicam_buffer, list); + node->cur_frm = buf; + node->next_frm = buf; + list_del(&buf->list); + spin_unlock_irqrestore(&node->dma_queue_lock, flags); + + buffer_addr[i] = + vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0); + + unicam_start_rx(dev, buffer_addr); + + ret = v4l2_subdev_call(&dev->sd, video, s_stream, 1); + if (ret < 0) { + unicam_err(dev, "stream on failed in subdev\n"); + goto err_disable_unicam; + } + + dev->clocks_enabled = true; + return 0; + +err_disable_unicam: + unicam_disable(dev); + clk_disable_unprepare(dev->clock); +err_vpu_clock: + if (clk_set_min_rate(dev->vpu_clock, 0)) + unicam_err(dev, "failed to reset the VPU clock\n"); + clk_disable_unprepare(dev->vpu_clock); +error_pipeline: + media_pipeline_stop(node->video_dev.entity.pads); +err_pm_put: + unicam_runtime_put(dev); +err_streaming: + unicam_return_buffers(node, VB2_BUF_STATE_QUEUED); + node->streaming = false; + + return ret; +} + +static void unicam_stop_streaming(struct vb2_queue *vq) +{ + struct unicam_node *node = vb2_get_drv_priv(vq); + struct unicam_device *dev = node->dev; + + node->streaming = false; + /* + * Stop streaming the sensor and disable the peripheral. + * We cannot continue streaming embedded data with the + * image pad disabled. + */ + if (v4l2_subdev_call(dev->sensor, video, s_stream, 0) < 0) + unicam_err(dev, "stream off failed in subdev\n"); + + unicam_disable(dev); + + media_pipeline_stop(node->video_dev.entity.pads); + + if (dev->clocks_enabled) { + if (clk_set_min_rate(dev->vpu_clock, 0)) + unicam_err(dev, "failed to reset the VPU clock\n"); + clk_disable_unprepare(dev->vpu_clock); + clk_disable_unprepare(dev->clock); + dev->clocks_enabled = false; + } + unicam_runtime_put(dev); + + if (is_metadata_node(node)) { + /* + * Allow the hardware to spin in the dummy buffer. + * This is only really needed if the embedded data pad is + * disabled before the image pad. + */ + unicam_wr_dma_addr(dev, node->dummy_buf_dma_addr, + DUMMY_BUF_SIZE, METADATA_NODE); + } + + /* Clear all queued buffers for the node */ + unicam_return_buffers(node, VB2_BUF_STATE_ERROR); +} + +static const struct vb2_ops unicam_video_qops = { + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, + .queue_setup = unicam_queue_setup, + .buf_prepare = unicam_buffer_prepare, + .buf_queue = unicam_buffer_queue, + .start_streaming = unicam_start_streaming, + .stop_streaming = unicam_stop_streaming, +}; + +/* unicam capture driver file operations */ +static const struct v4l2_file_operations unicam_fops = { + .owner = THIS_MODULE, + .open = v4l2_fh_open, + .release = vb2_fop_release, + .poll = vb2_fop_poll, + .unlocked_ioctl = video_ioctl2, /* V4L2 ioctl handler */ + .mmap = vb2_fop_mmap, +}; + +static int +unicam_async_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd) +{ + struct unicam_device *unicam = to_unicam_device(notifier->v4l2_dev); + + if (unicam->sensor) { + unicam_info(unicam, "Rejecting subdev %s (Already set!!)", + subdev->name); + return 0; + } + + unicam->sensor = subdev; + unicam_dbg(1, unicam, "Using sensor %s for capture\n", subdev->name); + + return 0; +} + +static void unicam_release(struct kref *kref) +{ + struct unicam_device *unicam = + container_of(kref, struct unicam_device, kref); + + v4l2_ctrl_handler_free(&unicam->ctrl_handler); + media_device_cleanup(&unicam->mdev); + + if (unicam->sensor_state) + __v4l2_subdev_state_free(unicam->sensor_state); + + kfree(unicam); +} + +static void unicam_put(struct unicam_device *unicam) +{ + kref_put(&unicam->kref, unicam_release); +} + +static void unicam_get(struct unicam_device *unicam) +{ + kref_get(&unicam->kref); +} + +static void unicam_node_release(struct video_device *vdev) +{ + struct unicam_node *node = video_get_drvdata(vdev); + + unicam_put(node->dev); +} + +static void unicam_mc_set_default_format(struct unicam_node *node) +{ + unicam_dbg(3, node->dev, "Set default format for %s node\n", + node->node_id == IMAGE_NODE ? "image" : "metadata"); + + if (is_image_node(node)) { + struct v4l2_pix_format *pix_fmt = &node->v_fmt.fmt.pix; + + pix_fmt->width = 640; + pix_fmt->height = 480; + pix_fmt->field = V4L2_FIELD_NONE; + pix_fmt->colorspace = V4L2_COLORSPACE_SRGB; + pix_fmt->ycbcr_enc = V4L2_YCBCR_ENC_601; + pix_fmt->quantization = V4L2_QUANTIZATION_LIM_RANGE; + pix_fmt->xfer_func = V4L2_XFER_FUNC_SRGB; + pix_fmt->pixelformat = formats[0].fourcc; + unicam_calc_format_size_bpl(node->dev, &formats[0], + &node->v_fmt); + node->v_fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + + node->fmt = &formats[0]; + } else { + const struct unicam_fmt *fmt; + + /* Fix this node format as embedded data. */ + fmt = find_format_by_code(MEDIA_BUS_FMT_METADATA_8); + node->v_fmt.fmt.meta.dataformat = fmt->fourcc; + node->fmt = fmt; + node->v_fmt.fmt.meta.buffersize = UNICAM_EMBEDDED_SIZE; + node->embedded_lines = 1; + node->v_fmt.type = V4L2_BUF_TYPE_META_CAPTURE; + } +} + +static int register_node(struct unicam_device *unicam, struct unicam_node *node, + enum v4l2_buf_type type) +{ + struct video_device *vdev; + struct vb2_queue *q; + int ret; + + node->dev = unicam; + node->node_id = type == V4L2_BUF_TYPE_VIDEO_CAPTURE ? + IMAGE_NODE : + METADATA_NODE; + + spin_lock_init(&node->dma_queue_lock); + mutex_init(&node->lock); + + vdev = &node->video_dev; + /* + * If the sensor subdevice has any controls, associate the node + * with the ctrl handler to allow access from userland. + */ + if (!list_empty(&unicam->ctrl_handler.ctrls)) + vdev->ctrl_handler = &unicam->ctrl_handler; + + q = &node->buffer_queue; + q->type = type; + q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ; + q->drv_priv = node; + q->ops = &unicam_video_qops; + q->mem_ops = &vb2_dma_contig_memops; + q->buf_struct_size = sizeof(struct unicam_buffer); + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + q->lock = &node->lock; + q->min_buffers_needed = 1; + q->dev = &unicam->pdev->dev; + + ret = vb2_queue_init(q); + if (ret) { + unicam_err(unicam, "vb2_queue_init() failed\n"); + return ret; + } + + INIT_LIST_HEAD(&node->dma_queue); + + vdev->release = unicam_node_release; + vdev->fops = &unicam_fops; + vdev->ioctl_ops = &unicam_mc_ioctl_ops; + vdev->v4l2_dev = &unicam->v4l2_dev; + vdev->vfl_dir = VFL_DIR_RX; + vdev->queue = q; + vdev->lock = &node->lock; + vdev->device_caps = (type == V4L2_BUF_TYPE_VIDEO_CAPTURE) ? + V4L2_CAP_VIDEO_CAPTURE : V4L2_CAP_META_CAPTURE; + vdev->device_caps |= V4L2_CAP_READWRITE | V4L2_CAP_STREAMING | V4L2_CAP_IO_MC; + vdev->entity.ops = &unicam_mc_entity_ops; + + /* Define the device names */ + snprintf(vdev->name, sizeof(vdev->name), "%s-%s", UNICAM_MODULE_NAME, + type == V4L2_BUF_TYPE_VIDEO_CAPTURE ? "image" : "embedded"); + + video_set_drvdata(vdev, node); + if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE) + vdev->entity.flags |= MEDIA_ENT_FL_DEFAULT; + node->pad.flags = MEDIA_PAD_FL_SINK; + media_entity_pads_init(&vdev->entity, 1, &node->pad); + + node->dummy_buf_cpu_addr = dma_alloc_coherent(&unicam->pdev->dev, + DUMMY_BUF_SIZE, + &node->dummy_buf_dma_addr, + GFP_KERNEL); + if (!node->dummy_buf_cpu_addr) { + unicam_err(unicam, "Unable to allocate dummy buffer.\n"); + return -ENOMEM; + } + + ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1); + if (ret) { + unicam_err(unicam, "Unable to register video device %s\n", + vdev->name); + return ret; + } + + /* + * Acquire a reference to unicam, which will be released when the video + * device will be unregistered and userspace will have closed all open + * file handles. + */ + unicam_get(unicam); + node->registered = true; + + ret = media_create_pad_link(&unicam->sd.entity, + node->src_pad_id, + &node->video_dev.entity, + 0, + MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); + if (ret) + unicam_err(unicam, "Unable to create pad link for %s", + unicam->sensor->name); + + unicam_mc_set_default_format(node); + + return ret; +} + +static void unregister_nodes(struct unicam_device *unicam) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(unicam->node); i++) { + struct unicam_node *node = &unicam->node[i]; + + if (node->dummy_buf_cpu_addr) { + dma_free_coherent(&unicam->pdev->dev, DUMMY_BUF_SIZE, + node->dummy_buf_cpu_addr, + node->dummy_buf_dma_addr); + } + + if (node->registered) { + node->registered = false; + video_unregister_device(&node->video_dev); + } + } +} + +static int unicam_async_complete(struct v4l2_async_notifier *notifier) +{ + struct unicam_device *unicam = to_unicam_device(notifier->v4l2_dev); + unsigned int i, source_pads = 0; + int ret; + static struct lock_class_key key; + + unicam->v4l2_dev.notify = unicam_notify; + + unicam->sensor_state = __v4l2_subdev_state_alloc(unicam->sensor, + "unicam:state->lock", + &key); + if (!unicam->sensor_state) + return -ENOMEM; + + for (i = 0; i < unicam->sd.entity.num_pads; i++) { + if (unicam->sd.entity.pads[i].flags & MEDIA_PAD_FL_SOURCE) { + if (source_pads < MAX_NODES) { + unicam->node[source_pads].src_pad_id = i; + unicam_dbg(3, unicam, "source pad %u is index %u\n", + source_pads, i); + } + source_pads++; + } + } + if (!source_pads) { + unicam_err(unicam, "No source pads on sensor.\n"); + goto unregister; + } + + ret = register_node(unicam, &unicam->node[IMAGE_NODE], + V4L2_BUF_TYPE_VIDEO_CAPTURE); + if (ret) { + unicam_err(unicam, "Unable to register image video device.\n"); + goto unregister; + } + + /* \todo: check before :-) */ + unicam->sensor_embedded_data = true; + + ret = register_node(unicam, &unicam->node[METADATA_NODE], + V4L2_BUF_TYPE_META_CAPTURE); + if (ret) { + unicam_err(unicam, "Unable to register metadata video device.\n"); + goto unregister; + } + + ret = media_create_pad_link(&unicam->sensor->entity, + 0, + &unicam->sd.entity, + UNICAM_SD_PAD_SINK, + MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); + if (ret) + unicam_err(unicam, "Unable to create pad link for %s", + unicam->sensor->name); + + ret = v4l2_device_register_subdev_nodes(&unicam->v4l2_dev); + if (ret) { + unicam_err(unicam, "Unable to register subdev nodes.\n"); + goto unregister; + } + + /* + * Release the initial reference, all references are now owned by the + * video devices. + */ + unicam_put(unicam); + return 0; + +unregister: + unregister_nodes(unicam); + unicam_put(unicam); + + return ret; +} + +static const struct v4l2_async_notifier_operations unicam_async_ops = { + .bound = unicam_async_bound, + .complete = unicam_async_complete, +}; + +static int of_unicam_connect_subdevs(struct unicam_device *dev) +{ + struct platform_device *pdev = dev->pdev; + struct v4l2_fwnode_endpoint ep = { }; + struct device_node *ep_node; + struct device_node *sensor_node; + unsigned int lane; + int ret = -EINVAL; + + if (of_property_read_u32(pdev->dev.of_node, "brcm,num-data-lanes", + &dev->max_data_lanes) < 0) { + unicam_err(dev, "number of data lanes not set\n"); + return -EINVAL; + } + + /* Get the local endpoint and remote device. */ + ep_node = of_graph_get_next_endpoint(pdev->dev.of_node, NULL); + if (!ep_node) { + unicam_dbg(3, dev, "can't get next endpoint\n"); + return -EINVAL; + } + + unicam_dbg(3, dev, "ep_node is %pOF\n", ep_node); + + sensor_node = of_graph_get_remote_port_parent(ep_node); + if (!sensor_node) { + unicam_dbg(3, dev, "can't get remote parent\n"); + goto cleanup_exit; + } + + unicam_dbg(1, dev, "found subdevice %pOF\n", sensor_node); + + /* Parse the local endpoint and validate its configuration. */ + v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_node), &ep); + + unicam_dbg(3, dev, "parsed local endpoint, bus_type %u\n", + ep.bus_type); + + dev->bus_type = ep.bus_type; + + switch (ep.bus_type) { + case V4L2_MBUS_CSI2_DPHY: + switch (ep.bus.mipi_csi2.num_data_lanes) { + case 1: + case 2: + case 4: + break; + + default: + unicam_err(dev, "subdevice %pOF: %u data lanes not supported\n", + sensor_node, + ep.bus.mipi_csi2.num_data_lanes); + goto cleanup_exit; + } + + for (lane = 0; lane < ep.bus.mipi_csi2.num_data_lanes; lane++) { + if (ep.bus.mipi_csi2.data_lanes[lane] != lane + 1) { + unicam_err(dev, "subdevice %pOF: data lanes reordering not supported\n", + sensor_node); + goto cleanup_exit; + } + } + + if (ep.bus.mipi_csi2.num_data_lanes > dev->max_data_lanes) { + unicam_err(dev, "subdevice requires %u data lanes when %u are supported\n", + ep.bus.mipi_csi2.num_data_lanes, + dev->max_data_lanes); + } + + dev->max_data_lanes = ep.bus.mipi_csi2.num_data_lanes; + dev->bus_flags = ep.bus.mipi_csi2.flags; + + break; + + case V4L2_MBUS_CCP2: + if (ep.bus.mipi_csi1.clock_lane != 0 || + ep.bus.mipi_csi1.data_lane != 1) { + unicam_err(dev, "subdevice %pOF: unsupported lanes configuration\n", + sensor_node); + goto cleanup_exit; + } + + dev->max_data_lanes = 1; + dev->bus_flags = ep.bus.mipi_csi1.strobe; + break; + + default: + /* Unsupported bus type */ + unicam_err(dev, "subdevice %pOF: unsupported bus type %u\n", + sensor_node, ep.bus_type); + goto cleanup_exit; + } + + unicam_dbg(3, dev, "subdevice %pOF: %s bus, %u data lanes, flags=0x%08x\n", + sensor_node, + dev->bus_type == V4L2_MBUS_CSI2_DPHY ? "CSI-2" : "CCP2", + dev->max_data_lanes, dev->bus_flags); + + /* Initialize and register the async notifier. */ + v4l2_async_nf_init(&dev->notifier); + dev->notifier.ops = &unicam_async_ops; + + dev->asd.match_type = V4L2_ASYNC_MATCH_FWNODE; + dev->asd.match.fwnode = fwnode_graph_get_remote_endpoint(of_fwnode_handle(ep_node)); + ret = v4l2_async_nf_add_subdev(&dev->notifier, &dev->asd); + if (ret) { + unicam_err(dev, "Error adding subdevice: %d\n", ret); + goto cleanup_exit; + } + + ret = v4l2_async_nf_register(&dev->v4l2_dev, &dev->notifier); + if (ret) { + unicam_err(dev, "Error registering async notifier: %d\n", ret); + ret = -EINVAL; + } + +cleanup_exit: + of_node_put(sensor_node); + of_node_put(ep_node); + + return ret; +} + +static int bcm2835_media_dev_init(struct unicam_device *unicam, + struct platform_device *pdev) +{ + int ret = 0; + + unicam->mdev.dev = &pdev->dev; + strscpy(unicam->mdev.model, UNICAM_MODULE_NAME, + sizeof(unicam->mdev.model)); + strscpy(unicam->mdev.serial, "", sizeof(unicam->mdev.serial)); + snprintf(unicam->mdev.bus_info, sizeof(unicam->mdev.bus_info), + "platform:%s", dev_name(&pdev->dev)); + unicam->mdev.hw_revision = 0; + + media_device_init(&unicam->mdev); + + unicam->v4l2_dev.mdev = &unicam->mdev; + + ret = v4l2_device_register(&pdev->dev, &unicam->v4l2_dev); + + return ret; +} + +/* Internal subdev */ + +static int _unicam_subdev_set_routing(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_krouting *routing) +{ + static const struct v4l2_mbus_framefmt format = { + .width = 640, + .height = 480, + .code = MEDIA_BUS_FMT_UYVY8_2X8, + .field = V4L2_FIELD_NONE, + .colorspace = V4L2_COLORSPACE_SRGB, + .ycbcr_enc = V4L2_YCBCR_ENC_601, + .quantization = V4L2_QUANTIZATION_LIM_RANGE, + .xfer_func = V4L2_XFER_FUNC_SRGB, + .flags = 0, + }; + int ret; + + ret = v4l2_subdev_routing_validate_1_to_1(routing); + if (ret) + return ret; + + v4l2_subdev_lock_state(state); + + ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing, &format); + + v4l2_subdev_unlock_state(state); + + if (ret) + return ret; + + return 0; +} + +static int unicam_subdev_set_routing(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + enum v4l2_subdev_format_whence which, + struct v4l2_subdev_krouting *routing) +{ + struct unicam_device *unicam = sd_to_unicam_device(sd); + + if (which == V4L2_SUBDEV_FORMAT_ACTIVE && unicam->streaming) + return -EBUSY; + + return _unicam_subdev_set_routing(sd, state, routing); +} + +static int unicam_subdev_init_cfg(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state) +{ + struct v4l2_subdev_route routes[] = { + { + .sink_pad = 0, + .sink_stream = 0, + .source_pad = 1, + .source_stream = 0, + .flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE, + }, + }; + + struct v4l2_subdev_krouting routing = { + .num_routes = ARRAY_SIZE(routes), + .routes = routes, + }; + + /* Initialize routing to single route to the fist source pad */ + return _unicam_subdev_set_routing(sd, state, &routing); +} + +static int unicam_subdev_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_mbus_code_enum *code) +{ + int ret = 0; + + v4l2_subdev_lock_state(state); + + /* No transcoding, source and sink codes must match. */ + if (unicam_sd_pad_is_source(code->pad)) { + struct v4l2_mbus_framefmt *fmt; + + if (code->index > 0) { + ret = -EINVAL; + goto out; + } + + fmt = v4l2_subdev_state_get_opposite_stream_format(state, + code->pad, + code->stream); + if (!fmt) { + ret = -EINVAL; + goto out; + } + + code->code = fmt->code; + } else { + if (code->index >= ARRAY_SIZE(formats)) { + ret = -EINVAL; + goto out; + } + + code->code = formats[code->index].code; + } + +out: + v4l2_subdev_unlock_state(state); + + return ret; +} + +static int unicam_subdev_start_streaming(struct unicam_device *unicam) +{ + const struct v4l2_subdev_krouting *routing; + struct v4l2_subdev_state *state; + int ret = 0; + + state = v4l2_subdev_lock_active_state(&unicam->sd); + + routing = &state->routing; + + v4l2_subdev_unlock_state(state); + + unicam->streaming = true; + + ret = v4l2_subdev_call(unicam->sensor, video, s_stream, 1); + if (ret) { + v4l2_subdev_call(unicam->sensor, video, s_stream, 0); + unicam->streaming = false; + return ret; + } + + return 0; +} + +static int unicam_subdev_stop_streaming(struct unicam_device *unicam) +{ + v4l2_subdev_call(unicam->sensor, video, s_stream, 0); + + unicam->streaming = false; + + return 0; +} + +static int unicam_subdev_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct unicam_device *unicam = sd_to_unicam_device(sd); + + if (enable) + return unicam_subdev_start_streaming(unicam); + else + return unicam_subdev_stop_streaming(unicam); + return 0; +} + +static int unicam_subdev_set_pad_format(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_format *format) +{ + struct unicam_device *unicam = sd_to_unicam_device(sd); + struct v4l2_mbus_framefmt *fmt; + int ret = 0; + + if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE && unicam->streaming) + return -EBUSY; + + /* No transcoding, source and sink formats must match. */ + if (unicam_sd_pad_is_source(format->pad)) + return v4l2_subdev_get_fmt(sd, state, format); + + // TODO: implement fmt validation + + v4l2_subdev_lock_state(state); + + fmt = v4l2_state_get_stream_format(state, format->pad, format->stream); + if (!fmt) { + ret = -EINVAL; + goto out; + } + + *fmt = format->format; + + fmt = v4l2_subdev_state_get_opposite_stream_format(state, format->pad, + format->stream); + if (!fmt) { + ret = -EINVAL; + goto out; + } + + *fmt = format->format; + +out: + v4l2_subdev_unlock_state(state); + + return ret; +} + +static int unicam_subdev_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_frame_size_enum *fse) +{ + const struct unicam_fmt *fmtinfo; + int ret = 0; + + if (fse->index > 0) + return -EINVAL; + + v4l2_subdev_lock_state(state); + + /* No transcoding, source and sink formats must match. */ + if (unicam_sd_pad_is_source(fse->pad)) { + struct v4l2_mbus_framefmt *fmt; + + fmt = v4l2_subdev_state_get_opposite_stream_format(state, + fse->pad, + fse->stream); + + if (!fmt) { + ret = -EINVAL; + goto out; + } + + if (fse->code != fmt->code) { + ret = -EINVAL; + goto out; + } + + fse->min_width = fmt->width; + fse->max_width = fmt->width; + fse->min_height = fmt->height; + fse->max_height = fmt->height; + } else { + fmtinfo = find_format_by_code(fse->code); + if (!fmtinfo) { + ret = -EINVAL; + goto out; + } + + fse->min_width = MIN_WIDTH * 8 / ALIGN(fmtinfo->depth, 8); + fse->max_width = MAX_WIDTH * 8 / ALIGN(fmtinfo->depth, 8); + fse->min_height = MIN_HEIGHT; + fse->max_height = MAX_HEIGHT; + } + +out: + v4l2_subdev_unlock_state(state); + + return ret; +} + +static const struct v4l2_subdev_video_ops unicam_subdev_video_ops = { + .s_stream = unicam_subdev_s_stream, +}; + +static const struct v4l2_subdev_pad_ops unicam_subdev_pad_ops = { + .init_cfg = unicam_subdev_init_cfg, + .enum_mbus_code = unicam_subdev_enum_mbus_code, + .get_fmt = v4l2_subdev_get_fmt, + .set_fmt = unicam_subdev_set_pad_format, + .set_routing = unicam_subdev_set_routing, + .enum_frame_size = unicam_subdev_enum_frame_size, +}; + +static const struct v4l2_subdev_ops unicam_subdev_ops = { + .video = &unicam_subdev_video_ops, + .pad = &unicam_subdev_pad_ops, +}; + +static struct media_entity_operations unicam_subdev_media_ops = { + .link_validate = v4l2_subdev_link_validate, + .has_route = v4l2_subdev_has_route, +}; + +static int unicam_probe(struct platform_device *pdev) +{ + struct unicam_device *unicam; + int ret = 0; + int i; + + unicam = kzalloc(sizeof(*unicam), GFP_KERNEL); + if (!unicam) + return -ENOMEM; + + kref_init(&unicam->kref); + unicam->pdev = pdev; + + /* + * Adopt the current setting of the module parameter, and check if + * device tree requests it. + */ + if (!of_property_read_bool(pdev->dev.of_node, "brcm,media-controller")) { + unicam_err(unicam, "Failed to find media-controller node\n"); + goto err_unicam_put; + } + + unicam->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(unicam->base)) { + unicam_err(unicam, "Failed to get main io block\n"); + ret = PTR_ERR(unicam->base); + goto err_unicam_put; + } + + unicam->clk_gate_base = devm_platform_ioremap_resource(pdev, 1); + if (IS_ERR(unicam->clk_gate_base)) { + unicam_err(unicam, "Failed to get 2nd io block\n"); + ret = PTR_ERR(unicam->clk_gate_base); + goto err_unicam_put; + } + + unicam->clock = devm_clk_get(&pdev->dev, "lp"); + if (IS_ERR(unicam->clock)) { + unicam_err(unicam, "Failed to get lp clock\n"); + ret = PTR_ERR(unicam->clock); + goto err_unicam_put; + } + + unicam->vpu_clock = devm_clk_get(&pdev->dev, "vpu"); + if (IS_ERR(unicam->vpu_clock)) { + unicam_err(unicam, "Failed to get vpu clock\n"); + ret = PTR_ERR(unicam->vpu_clock); + goto err_unicam_put; + } + + ret = platform_get_irq(pdev, 0); + if (ret <= 0) { + dev_err(&pdev->dev, "No IRQ resource\n"); + ret = -EINVAL; + goto err_unicam_put; + } + + ret = devm_request_irq(&pdev->dev, ret, unicam_isr, 0, + "unicam_capture0", unicam); + if (ret) { + dev_err(&pdev->dev, "Unable to request interrupt\n"); + ret = -EINVAL; + goto err_unicam_put; + } + + ret = bcm2835_media_dev_init(unicam, pdev); + if (ret) { + unicam_err(unicam, + "Unable to register v4l2 device.\n"); + goto err_unicam_put; + } + + ret = media_device_register(&unicam->mdev); + if (ret < 0) { + unicam_err(unicam, + "Unable to register media-controller device.\n"); + goto err_v4l2_unregister; + } + + /* Reserve space for the controls */ + ret = v4l2_ctrl_handler_init(&unicam->ctrl_handler, 16); + if (ret < 0) + goto err_media_unregister; + + /* set the driver data in platform device */ + platform_set_drvdata(pdev, unicam); + + unicam_dbg(3, unicam, "Initialize internal subdev"); + v4l2_subdev_init(&unicam->sd, &unicam_subdev_ops); + v4l2_set_subdevdata(&unicam->sd, unicam); + unicam->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; + unicam->sd.dev = &pdev->dev; + unicam->sd.owner = THIS_MODULE; + unicam->sd.flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_MULTIPLEXED; + snprintf(unicam->sd.name, sizeof(unicam->sd.name), "unicam-subdev"); + + unicam->pads[UNICAM_SD_PAD_SINK].flags = MEDIA_PAD_FL_SINK; + + for (i = UNICAM_SD_PAD_FIRST_SOURCE; i < UNICAM_SD_NUM_PADS; ++i) + unicam->pads[i].flags = MEDIA_PAD_FL_SOURCE; + unicam->sd.entity.ops = &unicam_subdev_media_ops; + ret = media_entity_pads_init(&unicam->sd.entity, + ARRAY_SIZE(unicam->pads), unicam->pads); + if (ret) { + unicam_err(unicam, "Could not init media controller for subdev"); + goto err_subdev_unregister; + } + + ret = v4l2_subdev_init_finalize(&unicam->sd); + if (ret) { + unicam_err(unicam, "Could not finalize init for subdev"); + goto err_entity_cleanup; + } + + ret = v4l2_device_register_subdev(&unicam->v4l2_dev, &unicam->sd); + if (ret) { + dev_err(&pdev->dev, "Failed to register internal subdev\n"); + goto err_subdev_unregister; + } + + ret = of_unicam_connect_subdevs(unicam); + if (ret) { + dev_err(&pdev->dev, "Failed to connect subdevs\n"); + goto err_subdev_unregister; + } + + /* Enable the block power domain */ + pm_runtime_enable(&pdev->dev); + + return 0; + +err_subdev_unregister: + v4l2_subdev_cleanup(&unicam->sd); +err_entity_cleanup: + media_entity_cleanup(&unicam->sd.entity); +err_media_unregister: + media_device_unregister(&unicam->mdev); +err_v4l2_unregister: + v4l2_device_unregister(&unicam->v4l2_dev); +err_unicam_put: + unicam_put(unicam); + + return ret; +} + +static int unicam_remove(struct platform_device *pdev) +{ + struct unicam_device *unicam = platform_get_drvdata(pdev); + + v4l2_async_nf_unregister(&unicam->notifier); + v4l2_device_unregister(&unicam->v4l2_dev); + media_device_unregister(&unicam->mdev); + unregister_nodes(unicam); + + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static const struct of_device_id unicam_of_match[] = { + { .compatible = "brcm,bcm2835-unicam", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, unicam_of_match); + +static struct platform_driver unicam_driver = { + .probe = unicam_probe, + .remove = unicam_remove, + .driver = { + .name = UNICAM_MODULE_NAME, + .of_match_table = of_match_ptr(unicam_of_match), + }, +}; + +module_platform_driver(unicam_driver); + +MODULE_AUTHOR("Dave Stevenson "); +MODULE_DESCRIPTION("BCM2835 Unicam driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(UNICAM_VERSION); diff --git a/drivers/media/platform/bcm2835/vc4-regs-unicam.h b/drivers/media/platform/bcm2835/vc4-regs-unicam.h new file mode 100644 index 000000000000..ae059a171d0f --- /dev/null +++ b/drivers/media/platform/bcm2835/vc4-regs-unicam.h @@ -0,0 +1,253 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +/* + * Copyright (C) 2017-2020 Raspberry Pi Trading. + * Dave Stevenson + */ + +#ifndef VC4_REGS_UNICAM_H +#define VC4_REGS_UNICAM_H + +/* + * The following values are taken from files found within the code drop + * made by Broadcom for the BCM21553 Graphics Driver, predominantly in + * brcm_usrlib/dag/vmcsx/vcinclude/hardware_vc4.h. + * They have been modified to be only the register offset. + */ +#define UNICAM_CTRL 0x000 +#define UNICAM_STA 0x004 +#define UNICAM_ANA 0x008 +#define UNICAM_PRI 0x00c +#define UNICAM_CLK 0x010 +#define UNICAM_CLT 0x014 +#define UNICAM_DAT0 0x018 +#define UNICAM_DAT1 0x01c +#define UNICAM_DAT2 0x020 +#define UNICAM_DAT3 0x024 +#define UNICAM_DLT 0x028 +#define UNICAM_CMP0 0x02c +#define UNICAM_CMP1 0x030 +#define UNICAM_CAP0 0x034 +#define UNICAM_CAP1 0x038 +#define UNICAM_ICTL 0x100 +#define UNICAM_ISTA 0x104 +#define UNICAM_IDI0 0x108 +#define UNICAM_IPIPE 0x10c +#define UNICAM_IBSA0 0x110 +#define UNICAM_IBEA0 0x114 +#define UNICAM_IBLS 0x118 +#define UNICAM_IBWP 0x11c +#define UNICAM_IHWIN 0x120 +#define UNICAM_IHSTA 0x124 +#define UNICAM_IVWIN 0x128 +#define UNICAM_IVSTA 0x12c +#define UNICAM_ICC 0x130 +#define UNICAM_ICS 0x134 +#define UNICAM_IDC 0x138 +#define UNICAM_IDPO 0x13c +#define UNICAM_IDCA 0x140 +#define UNICAM_IDCD 0x144 +#define UNICAM_IDS 0x148 +#define UNICAM_DCS 0x200 +#define UNICAM_DBSA0 0x204 +#define UNICAM_DBEA0 0x208 +#define UNICAM_DBWP 0x20c +#define UNICAM_DBCTL 0x300 +#define UNICAM_IBSA1 0x304 +#define UNICAM_IBEA1 0x308 +#define UNICAM_IDI1 0x30c +#define UNICAM_DBSA1 0x310 +#define UNICAM_DBEA1 0x314 +#define UNICAM_MISC 0x400 + +/* + * The following bitmasks are from the kernel released by Broadcom + * for Android - https://android.googlesource.com/kernel/bcm/ + * The Rhea, Hawaii, and Java chips all contain the same VideoCore4 + * Unicam block as BCM2835, as defined in eg + * arch/arm/mach-rhea/include/mach/rdb_A0/brcm_rdb_cam.h and similar. + * Values reworked to use the kernel BIT and GENMASK macros. + * + * Some of the bit mnenomics have been amended to match the datasheet. + */ +/* UNICAM_CTRL Register */ +#define UNICAM_CPE BIT(0) +#define UNICAM_MEM BIT(1) +#define UNICAM_CPR BIT(2) +#define UNICAM_CPM_MASK GENMASK(3, 3) +#define UNICAM_CPM_CSI2 0 +#define UNICAM_CPM_CCP2 1 +#define UNICAM_SOE BIT(4) +#define UNICAM_DCM_MASK GENMASK(5, 5) +#define UNICAM_DCM_STROBE 0 +#define UNICAM_DCM_DATA 1 +#define UNICAM_SLS BIT(6) +#define UNICAM_PFT_MASK GENMASK(11, 8) +#define UNICAM_OET_MASK GENMASK(20, 12) + +/* UNICAM_STA Register */ +#define UNICAM_SYN BIT(0) +#define UNICAM_CS BIT(1) +#define UNICAM_SBE BIT(2) +#define UNICAM_PBE BIT(3) +#define UNICAM_HOE BIT(4) +#define UNICAM_PLE BIT(5) +#define UNICAM_SSC BIT(6) +#define UNICAM_CRCE BIT(7) +#define UNICAM_OES BIT(8) +#define UNICAM_IFO BIT(9) +#define UNICAM_OFO BIT(10) +#define UNICAM_BFO BIT(11) +#define UNICAM_DL BIT(12) +#define UNICAM_PS BIT(13) +#define UNICAM_IS BIT(14) +#define UNICAM_PI0 BIT(15) +#define UNICAM_PI1 BIT(16) +#define UNICAM_FSI_S BIT(17) +#define UNICAM_FEI_S BIT(18) +#define UNICAM_LCI_S BIT(19) +#define UNICAM_BUF0_RDY BIT(20) +#define UNICAM_BUF0_NO BIT(21) +#define UNICAM_BUF1_RDY BIT(22) +#define UNICAM_BUF1_NO BIT(23) +#define UNICAM_DI BIT(24) + +#define UNICAM_STA_MASK_ALL \ + (UNICAM_DL + \ + UNICAM_SBE + \ + UNICAM_PBE + \ + UNICAM_HOE + \ + UNICAM_PLE + \ + UNICAM_SSC + \ + UNICAM_CRCE + \ + UNICAM_IFO + \ + UNICAM_OFO + \ + UNICAM_PS + \ + UNICAM_PI0 + \ + UNICAM_PI1) + +/* UNICAM_ANA Register */ +#define UNICAM_APD BIT(0) +#define UNICAM_BPD BIT(1) +#define UNICAM_AR BIT(2) +#define UNICAM_DDL BIT(3) +#define UNICAM_CTATADJ_MASK GENMASK(7, 4) +#define UNICAM_PTATADJ_MASK GENMASK(11, 8) + +/* UNICAM_PRI Register */ +#define UNICAM_PE BIT(0) +#define UNICAM_PT_MASK GENMASK(2, 1) +#define UNICAM_NP_MASK GENMASK(7, 4) +#define UNICAM_PP_MASK GENMASK(11, 8) +#define UNICAM_BS_MASK GENMASK(15, 12) +#define UNICAM_BL_MASK GENMASK(17, 16) + +/* UNICAM_CLK Register */ +#define UNICAM_CLE BIT(0) +#define UNICAM_CLPD BIT(1) +#define UNICAM_CLLPE BIT(2) +#define UNICAM_CLHSE BIT(3) +#define UNICAM_CLTRE BIT(4) +#define UNICAM_CLAC_MASK GENMASK(8, 5) +#define UNICAM_CLSTE BIT(29) + +/* UNICAM_CLT Register */ +#define UNICAM_CLT1_MASK GENMASK(7, 0) +#define UNICAM_CLT2_MASK GENMASK(15, 8) + +/* UNICAM_DATn Registers */ +#define UNICAM_DLE BIT(0) +#define UNICAM_DLPD BIT(1) +#define UNICAM_DLLPE BIT(2) +#define UNICAM_DLHSE BIT(3) +#define UNICAM_DLTRE BIT(4) +#define UNICAM_DLSM BIT(5) +#define UNICAM_DLFO BIT(28) +#define UNICAM_DLSTE BIT(29) + +#define UNICAM_DAT_MASK_ALL (UNICAM_DLSTE + UNICAM_DLFO) + +/* UNICAM_DLT Register */ +#define UNICAM_DLT1_MASK GENMASK(7, 0) +#define UNICAM_DLT2_MASK GENMASK(15, 8) +#define UNICAM_DLT3_MASK GENMASK(23, 16) + +/* UNICAM_ICTL Register */ +#define UNICAM_FSIE BIT(0) +#define UNICAM_FEIE BIT(1) +#define UNICAM_IBOB BIT(2) +#define UNICAM_FCM BIT(3) +#define UNICAM_TFC BIT(4) +#define UNICAM_LIP_MASK GENMASK(6, 5) +#define UNICAM_LCIE_MASK GENMASK(28, 16) + +/* UNICAM_IDI0/1 Register */ +#define UNICAM_ID0_MASK GENMASK(7, 0) +#define UNICAM_ID1_MASK GENMASK(15, 8) +#define UNICAM_ID2_MASK GENMASK(23, 16) +#define UNICAM_ID3_MASK GENMASK(31, 24) + +/* UNICAM_ISTA Register */ +#define UNICAM_FSI BIT(0) +#define UNICAM_FEI BIT(1) +#define UNICAM_LCI BIT(2) + +#define UNICAM_ISTA_MASK_ALL (UNICAM_FSI + UNICAM_FEI + UNICAM_LCI) + +/* UNICAM_IPIPE Register */ +#define UNICAM_PUM_MASK GENMASK(2, 0) + /* Unpacking modes */ + #define UNICAM_PUM_NONE 0 + #define UNICAM_PUM_UNPACK6 1 + #define UNICAM_PUM_UNPACK7 2 + #define UNICAM_PUM_UNPACK8 3 + #define UNICAM_PUM_UNPACK10 4 + #define UNICAM_PUM_UNPACK12 5 + #define UNICAM_PUM_UNPACK14 6 + #define UNICAM_PUM_UNPACK16 7 +#define UNICAM_DDM_MASK GENMASK(6, 3) +#define UNICAM_PPM_MASK GENMASK(9, 7) + /* Packing modes */ + #define UNICAM_PPM_NONE 0 + #define UNICAM_PPM_PACK8 1 + #define UNICAM_PPM_PACK10 2 + #define UNICAM_PPM_PACK12 3 + #define UNICAM_PPM_PACK14 4 + #define UNICAM_PPM_PACK16 5 +#define UNICAM_DEM_MASK GENMASK(11, 10) +#define UNICAM_DEBL_MASK GENMASK(14, 12) +#define UNICAM_ICM_MASK GENMASK(16, 15) +#define UNICAM_IDM_MASK GENMASK(17, 17) + +/* UNICAM_ICC Register */ +#define UNICAM_ICFL_MASK GENMASK(4, 0) +#define UNICAM_ICFH_MASK GENMASK(9, 5) +#define UNICAM_ICST_MASK GENMASK(12, 10) +#define UNICAM_ICLT_MASK GENMASK(15, 13) +#define UNICAM_ICLL_MASK GENMASK(31, 16) + +/* UNICAM_DCS Register */ +#define UNICAM_DIE BIT(0) +#define UNICAM_DIM BIT(1) +#define UNICAM_DBOB BIT(3) +#define UNICAM_FDE BIT(4) +#define UNICAM_LDP BIT(5) +#define UNICAM_EDL_MASK GENMASK(15, 8) + +/* UNICAM_DBCTL Register */ +#define UNICAM_DBEN BIT(0) +#define UNICAM_BUF0_IE BIT(1) +#define UNICAM_BUF1_IE BIT(2) + +/* UNICAM_CMP[0,1] register */ +#define UNICAM_PCE BIT(31) +#define UNICAM_GI BIT(9) +#define UNICAM_CPH BIT(8) +#define UNICAM_PCVC_MASK GENMASK(7, 6) +#define UNICAM_PCDT_MASK GENMASK(5, 0) + +/* UNICAM_MISC register */ +#define UNICAM_FL0 BIT(6) +#define UNICAM_FL1 BIT(9) + +#endif From patchwork Wed Jan 12 17:27:20 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jean-Michel Hautbois X-Patchwork-Id: 531667 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id D1F4EC43217 for ; Wed, 12 Jan 2022 17:27:55 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1355598AbiALR1w (ORCPT ); Wed, 12 Jan 2022 12:27:52 -0500 Received: from perceval.ideasonboard.com ([213.167.242.64]:47054 "EHLO perceval.ideasonboard.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1355584AbiALR1p (ORCPT ); Wed, 12 Jan 2022 12:27:45 -0500 Received: from tatooine.ideasonboard.com (unknown [IPv6:2a01:e0a:169:7140:662a:d95e:24d7:7832]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 1A3201288; Wed, 12 Jan 2022 18:27:42 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1642008462; bh=JUDmXm68+J+lcdg2+zBOfwAt1GhWT5fRkTcBrl5ner4=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=qY1yAZXUDVunKGwDDqKoRbvNH72FHC+sTQgKslkoiSrA8NlFQYJ2eDL9Ok1PXNN+A Bt+dpCSlucSbPac2HIj3YleY0/cxF/yJVs6GwBvii/2vCZD4ChCadnaVXYtkXYSoDQ CPT6OvthNZX14mmYlR/DzFDodlniIdkFHcHO4NJs= From: Jean-Michel Hautbois To: linux-media@vger.kernel.org Cc: kernel-list@raspberrypi.com, mchehab@kernel.org, dave.stevenson@raspberrypi.com, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, laurent.pinchart@ideasonboard.com, naush@raspberrypi.com, lukasz@jany.st, devicetree@vger.kernel.org, jeanmichel.hautbois@ideasonboard.com Subject: [RFC PATCH 3/3] media: imx219: Add support for multiplexed streams Date: Wed, 12 Jan 2022 18:27:20 +0100 Message-Id: <20220112172719.1178446-4-jeanmichel.hautbois@ideasonboard.com> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20220112172719.1178446-1-jeanmichel.hautbois@ideasonboard.com> References: <20220112172719.1178446-1-jeanmichel.hautbois@ideasonboard.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org As of now, imx219 was not supporting anything more than one stream. Add support for embedded data, based on linux-rpi kernel, and make it work with multiplexed streams. We have only one source pad with two streams: stream 0 is the image, and stream 1 is the embedded data. Signed-off-by: Naushir Patuck Signed-off-by: Jean-Michel Hautbois --- drivers/media/i2c/imx219.c | 458 ++++++++++++++++++++----------------- 1 file changed, 248 insertions(+), 210 deletions(-) diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c index e10af3f74b38..d531b67f541b 100644 --- a/drivers/media/i2c/imx219.c +++ b/drivers/media/i2c/imx219.c @@ -118,6 +118,16 @@ #define IMX219_PIXEL_ARRAY_WIDTH 3280U #define IMX219_PIXEL_ARRAY_HEIGHT 2464U +/* Embedded metadata stream structure */ +#define IMX219_EMBEDDED_LINE_WIDTH 16384 +#define IMX219_NUM_EMBEDDED_LINES 1 + +enum pad_types { + IMAGE_PAD, + METADATA_PAD, + NUM_PADS +}; + struct imx219_reg { u16 address; u8 val; @@ -429,7 +439,7 @@ static const char * const imx219_supply_name[] = { * - v flip * - h&v flips */ -static const u32 codes[] = { +static const u32 imx219_mbus_formats[] = { MEDIA_BUS_FMT_SRGGB10_1X10, MEDIA_BUS_FMT_SGRBG10_1X10, MEDIA_BUS_FMT_SGBRG10_1X10, @@ -655,62 +665,17 @@ static u32 imx219_get_format_code(struct imx219 *imx219, u32 code) lockdep_assert_held(&imx219->mutex); - for (i = 0; i < ARRAY_SIZE(codes); i++) - if (codes[i] == code) + for (i = 0; i < ARRAY_SIZE(imx219_mbus_formats); i++) + if (imx219_mbus_formats[i] == code) break; - if (i >= ARRAY_SIZE(codes)) + if (i >= ARRAY_SIZE(imx219_mbus_formats)) i = 0; i = (i & ~3) | (imx219->vflip->val ? 2 : 0) | (imx219->hflip->val ? 1 : 0); - return codes[i]; -} - -static void imx219_set_default_format(struct imx219 *imx219) -{ - struct v4l2_mbus_framefmt *fmt; - - fmt = &imx219->fmt; - fmt->code = MEDIA_BUS_FMT_SRGGB10_1X10; - fmt->colorspace = V4L2_COLORSPACE_SRGB; - fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace); - fmt->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true, - fmt->colorspace, - fmt->ycbcr_enc); - fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace); - fmt->width = supported_modes[0].width; - fmt->height = supported_modes[0].height; - fmt->field = V4L2_FIELD_NONE; -} - -static int imx219_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) -{ - struct imx219 *imx219 = to_imx219(sd); - struct v4l2_mbus_framefmt *try_fmt = - v4l2_subdev_get_try_format(sd, fh->state, 0); - struct v4l2_rect *try_crop; - - mutex_lock(&imx219->mutex); - - /* Initialize try_fmt */ - try_fmt->width = supported_modes[0].width; - try_fmt->height = supported_modes[0].height; - try_fmt->code = imx219_get_format_code(imx219, - MEDIA_BUS_FMT_SRGGB10_1X10); - try_fmt->field = V4L2_FIELD_NONE; - - /* Initialize try_crop rectangle. */ - try_crop = v4l2_subdev_get_try_crop(sd, fh->state, 0); - try_crop->top = IMX219_PIXEL_ARRAY_TOP; - try_crop->left = IMX219_PIXEL_ARRAY_LEFT; - try_crop->width = IMX219_PIXEL_ARRAY_WIDTH; - try_crop->height = IMX219_PIXEL_ARRAY_HEIGHT; - - mutex_unlock(&imx219->mutex); - - return 0; + return imx219_mbus_formats[i]; } static int imx219_set_ctrl(struct v4l2_ctrl *ctrl) @@ -802,98 +767,148 @@ static const struct v4l2_ctrl_ops imx219_ctrl_ops = { .s_ctrl = imx219_set_ctrl, }; -static int imx219_enum_mbus_code(struct v4l2_subdev *sd, - struct v4l2_subdev_state *sd_state, - struct v4l2_subdev_mbus_code_enum *code) +static void imx219_init_formats(struct v4l2_subdev_state *state) { - struct imx219 *imx219 = to_imx219(sd); + struct v4l2_mbus_framefmt *format; + + format = v4l2_state_get_stream_format(state, 0, 0); + format->code = imx219_mbus_formats[0]; + format->width = supported_modes[0].width; + format->height = supported_modes[0].height; + format->field = V4L2_FIELD_NONE; + format->colorspace = V4L2_COLORSPACE_RAW; + + if (state->routing.routes[1].flags & V4L2_SUBDEV_ROUTE_FL_ACTIVE) { + format = v4l2_state_get_stream_format(state, 0, 1); + format->code = MEDIA_BUS_FMT_METADATA_8; + format->width = IMX219_EMBEDDED_LINE_WIDTH; + format->height = 1; + format->field = V4L2_FIELD_NONE; + format->colorspace = V4L2_COLORSPACE_DEFAULT; + } +} - if (code->index >= (ARRAY_SIZE(codes) / 4)) - return -EINVAL; +static int _imx219_set_routing(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state) +{ + struct v4l2_subdev_route routes[] = { + { + .source_pad = 0, + .source_stream = 0, + .flags = V4L2_SUBDEV_ROUTE_FL_IMMUTABLE | + V4L2_SUBDEV_ROUTE_FL_SOURCE | + V4L2_SUBDEV_ROUTE_FL_ACTIVE, + }, + { + .source_pad = 0, + .source_stream = 1, + .flags = V4L2_SUBDEV_ROUTE_FL_SOURCE | + V4L2_SUBDEV_ROUTE_FL_ACTIVE, + } + }; - mutex_lock(&imx219->mutex); - code->code = imx219_get_format_code(imx219, codes[code->index * 4]); - mutex_unlock(&imx219->mutex); + struct v4l2_subdev_krouting routing = { + .num_routes = ARRAY_SIZE(routes), + .routes = routes, + }; + + int ret; + + ret = v4l2_subdev_set_routing(sd, state, &routing); + if (ret) + return ret; + + imx219_init_formats(state); return 0; } -static int imx219_enum_frame_size(struct v4l2_subdev *sd, - struct v4l2_subdev_state *sd_state, - struct v4l2_subdev_frame_size_enum *fse) +static int imx219_set_routing(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + enum v4l2_subdev_format_whence which, + struct v4l2_subdev_krouting *routing) { - struct imx219 *imx219 = to_imx219(sd); - u32 code; + int ret; - if (fse->index >= ARRAY_SIZE(supported_modes)) + if (routing->num_routes == 0 || routing->num_routes > 2) return -EINVAL; - mutex_lock(&imx219->mutex); - code = imx219_get_format_code(imx219, fse->code); - mutex_unlock(&imx219->mutex); - if (fse->code != code) - return -EINVAL; + v4l2_subdev_lock_state(state); - fse->min_width = supported_modes[fse->index].width; - fse->max_width = fse->min_width; - fse->min_height = supported_modes[fse->index].height; - fse->max_height = fse->min_height; + ret = _imx219_set_routing(sd, state); - return 0; + v4l2_subdev_unlock_state(state); + + return ret; } -static void imx219_reset_colorspace(struct v4l2_mbus_framefmt *fmt) +static int imx219_init_cfg(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state) { - fmt->colorspace = V4L2_COLORSPACE_SRGB; - fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace); - fmt->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true, - fmt->colorspace, - fmt->ycbcr_enc); - fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace); + int ret; + + v4l2_subdev_lock_state(state); + + ret = _imx219_set_routing(sd, state); + + v4l2_subdev_unlock_state(state); + + return ret; } -static void imx219_update_pad_format(struct imx219 *imx219, - const struct imx219_mode *mode, - struct v4l2_subdev_format *fmt) +static int imx219_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code) { - fmt->format.width = mode->width; - fmt->format.height = mode->height; - fmt->format.field = V4L2_FIELD_NONE; - imx219_reset_colorspace(&fmt->format); + if (code->index >= ARRAY_SIZE(imx219_mbus_formats)) + return -EINVAL; + + code->code = imx219_mbus_formats[code->index]; + + return 0; } -static int __imx219_get_pad_format(struct imx219 *imx219, - struct v4l2_subdev_state *sd_state, - struct v4l2_subdev_format *fmt) +static int imx219_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_frame_size_enum *fse) { - if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { - struct v4l2_mbus_framefmt *try_fmt = - v4l2_subdev_get_try_format(&imx219->sd, sd_state, - fmt->pad); - /* update the code which could change due to vflip or hflip: */ - try_fmt->code = imx219_get_format_code(imx219, try_fmt->code); - fmt->format = *try_fmt; + unsigned int i; + + if (fse->stream == 0) { + for (i = 0; i < ARRAY_SIZE(imx219_mbus_formats); ++i) { + if (imx219_mbus_formats[i] == fse->code) + break; + } + + if (i == ARRAY_SIZE(imx219_mbus_formats)) + return -EINVAL; + + if (fse->index >= ARRAY_SIZE(supported_modes)) + return -EINVAL; + + fse->min_width = supported_modes[fse->index].width; + fse->max_width = fse->min_width; + fse->max_height = supported_modes[fse->index].height; + fse->min_height = fse->max_height; } else { - imx219_update_pad_format(imx219, imx219->mode, fmt); - fmt->format.code = imx219_get_format_code(imx219, - imx219->fmt.code); + if (fse->code != MEDIA_BUS_FMT_METADATA_8) + return -EINVAL; + + fse->min_width = IMX219_EMBEDDED_LINE_WIDTH; + fse->max_width = fse->min_width; + fse->min_height = IMX219_NUM_EMBEDDED_LINES; + fse->max_height = fse->min_height; } return 0; } -static int imx219_get_pad_format(struct v4l2_subdev *sd, - struct v4l2_subdev_state *sd_state, - struct v4l2_subdev_format *fmt) +static void imx219_update_metadata_pad_format(struct v4l2_subdev_format *fmt) { - struct imx219 *imx219 = to_imx219(sd); - int ret; - - mutex_lock(&imx219->mutex); - ret = __imx219_get_pad_format(imx219, sd_state, fmt); - mutex_unlock(&imx219->mutex); - - return ret; + fmt->format.width = IMX219_EMBEDDED_LINE_WIDTH; + fmt->format.height = IMX219_NUM_EMBEDDED_LINES; + fmt->format.code = MEDIA_BUS_FMT_METADATA_8; + fmt->format.field = V4L2_FIELD_NONE; } static int imx219_set_pad_format(struct v4l2_subdev *sd, @@ -901,82 +916,99 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd, struct v4l2_subdev_format *fmt) { struct imx219 *imx219 = to_imx219(sd); + struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd); const struct imx219_mode *mode; - struct v4l2_mbus_framefmt *framefmt; - int exposure_max, exposure_def, hblank; + struct v4l2_mbus_framefmt *format; + u32 code; unsigned int i; + int ret = 0; + int exposure_max, exposure_def, hblank; - mutex_lock(&imx219->mutex); + if (fmt->pad != 0) { + dev_err(&client->dev, "%s Could not get pad %d\n", __func__, + fmt->pad); + return -EINVAL; + } + + if (fmt->stream == 1) { + /* Only one embedded data mode is supported */ + imx219_update_metadata_pad_format(fmt); + return 0; + } + + if (fmt->stream != 0) + return -EINVAL; - for (i = 0; i < ARRAY_SIZE(codes); i++) - if (codes[i] == fmt->format.code) + /* + * Validate the media bus code, defaulting to the first one if the + * requested code isn't supported. + */ + for (i = 0; i < ARRAY_SIZE(imx219_mbus_formats); ++i) { + if (imx219_mbus_formats[i] == fmt->format.code) { + code = fmt->format.code; break; - if (i >= ARRAY_SIZE(codes)) - i = 0; + } + } + + if (i == ARRAY_SIZE(imx219_mbus_formats)) + code = imx219_mbus_formats[0]; /* Bayer order varies with flips */ - fmt->format.code = imx219_get_format_code(imx219, codes[i]); + fmt->format.code = imx219_get_format_code(imx219, imx219_mbus_formats[i]); mode = v4l2_find_nearest_size(supported_modes, ARRAY_SIZE(supported_modes), width, height, - fmt->format.width, fmt->format.height); - imx219_update_pad_format(imx219, mode, fmt); - if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { - framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); - *framefmt = fmt->format; - } else if (imx219->mode != mode || - imx219->fmt.code != fmt->format.code) { - imx219->fmt = fmt->format; - imx219->mode = mode; - /* Update limits and set FPS to default */ - __v4l2_ctrl_modify_range(imx219->vblank, IMX219_VBLANK_MIN, - IMX219_VTS_MAX - mode->height, 1, - mode->vts_def - mode->height); - __v4l2_ctrl_s_ctrl(imx219->vblank, - mode->vts_def - mode->height); - /* Update max exposure while meeting expected vblanking */ - exposure_max = mode->vts_def - 4; - exposure_def = (exposure_max < IMX219_EXPOSURE_DEFAULT) ? - exposure_max : IMX219_EXPOSURE_DEFAULT; - __v4l2_ctrl_modify_range(imx219->exposure, - imx219->exposure->minimum, - exposure_max, imx219->exposure->step, - exposure_def); - /* - * Currently PPL is fixed to IMX219_PPL_DEFAULT, so hblank - * depends on mode->width only, and is not changeble in any - * way other than changing the mode. - */ - hblank = IMX219_PPL_DEFAULT - mode->width; - __v4l2_ctrl_modify_range(imx219->hblank, hblank, hblank, 1, - hblank); - } + fmt->format.width, + fmt->format.height); - mutex_unlock(&imx219->mutex); + v4l2_subdev_lock_state(sd_state); - return 0; -} + /* Update the stored format and return it. */ + format = v4l2_state_get_stream_format(sd_state, fmt->pad, fmt->stream); -static int imx219_set_framefmt(struct imx219 *imx219) -{ - switch (imx219->fmt.code) { - case MEDIA_BUS_FMT_SRGGB8_1X8: - case MEDIA_BUS_FMT_SGRBG8_1X8: - case MEDIA_BUS_FMT_SGBRG8_1X8: - case MEDIA_BUS_FMT_SBGGR8_1X8: - return imx219_write_regs(imx219, raw8_framefmt_regs, - ARRAY_SIZE(raw8_framefmt_regs)); - - case MEDIA_BUS_FMT_SRGGB10_1X10: - case MEDIA_BUS_FMT_SGRBG10_1X10: - case MEDIA_BUS_FMT_SGBRG10_1X10: - case MEDIA_BUS_FMT_SBGGR10_1X10: - return imx219_write_regs(imx219, raw10_framefmt_regs, - ARRAY_SIZE(raw10_framefmt_regs)); + if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE && imx219->streaming) { + ret = -EBUSY; + goto done; } - return -EINVAL; + format->code = code; + format->width = mode->width; + format->height = mode->height; + + fmt->format = *format; + + /* Update limits and set FPS to default */ + __v4l2_ctrl_modify_range(imx219->vblank, + IMX219_VBLANK_MIN, + IMX219_VTS_MAX - mode->height, + 1, + mode->vts_def - mode->height); + __v4l2_ctrl_s_ctrl(imx219->vblank, mode->vts_def - mode->height); + /* + * Update max exposure while meeting + * expected vblanking + */ + exposure_max = mode->vts_def - 4; + exposure_def = (exposure_max < IMX219_EXPOSURE_DEFAULT) ? + exposure_max : IMX219_EXPOSURE_DEFAULT; + __v4l2_ctrl_modify_range(imx219->exposure, + imx219->exposure->minimum, + exposure_max, + imx219->exposure->step, + exposure_def); + /* + * Currently PPL is fixed to IMX219_PPL_DEFAULT, so + * hblank depends on mode->width only, and is not + * changeble in any way other than changing the mode. + */ + hblank = IMX219_PPL_DEFAULT - mode->width; + __v4l2_ctrl_modify_range(imx219->hblank, hblank, hblank, 1, hblank); + +done: + v4l2_subdev_unlock_state(sd_state); + + return ret; } static const struct v4l2_rect * @@ -1037,9 +1069,11 @@ static int imx219_start_streaming(struct imx219 *imx219) const struct imx219_reg_list *reg_list; int ret; - ret = pm_runtime_resume_and_get(&client->dev); - if (ret < 0) + ret = pm_runtime_get_sync(&client->dev); + if (ret < 0) { + pm_runtime_put_noidle(&client->dev); return ret; + } /* Apply default values of current mode */ reg_list = &imx219->mode->reg_list; @@ -1049,13 +1083,6 @@ static int imx219_start_streaming(struct imx219 *imx219) goto err_rpm_put; } - ret = imx219_set_framefmt(imx219); - if (ret) { - dev_err(&client->dev, "%s failed to set frame format: %d\n", - __func__, ret); - goto err_rpm_put; - } - /* Apply customized values from user */ ret = __v4l2_ctrl_handler_setup(imx219->sd.ctrl_handler); if (ret) @@ -1133,21 +1160,22 @@ static int imx219_set_stream(struct v4l2_subdev *sd, int enable) /* Power/clock management functions */ static int imx219_power_on(struct device *dev) { - struct v4l2_subdev *sd = dev_get_drvdata(dev); + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *sd = i2c_get_clientdata(client); struct imx219 *imx219 = to_imx219(sd); int ret; ret = regulator_bulk_enable(IMX219_NUM_SUPPLIES, imx219->supplies); if (ret) { - dev_err(dev, "%s: failed to enable regulators\n", + dev_err(&client->dev, "%s: failed to enable regulators\n", __func__); return ret; } ret = clk_prepare_enable(imx219->xclk); if (ret) { - dev_err(dev, "%s: failed to enable clock\n", + dev_err(&client->dev, "%s: failed to enable clock\n", __func__); goto reg_off; } @@ -1166,7 +1194,8 @@ static int imx219_power_on(struct device *dev) static int imx219_power_off(struct device *dev) { - struct v4l2_subdev *sd = dev_get_drvdata(dev); + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *sd = i2c_get_clientdata(client); struct imx219 *imx219 = to_imx219(sd); gpiod_set_value_cansleep(imx219->reset_gpio, 0); @@ -1178,7 +1207,8 @@ static int imx219_power_off(struct device *dev) static int __maybe_unused imx219_suspend(struct device *dev) { - struct v4l2_subdev *sd = dev_get_drvdata(dev); + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *sd = i2c_get_clientdata(client); struct imx219 *imx219 = to_imx219(sd); if (imx219->streaming) @@ -1189,7 +1219,8 @@ static int __maybe_unused imx219_suspend(struct device *dev) static int __maybe_unused imx219_resume(struct device *dev) { - struct v4l2_subdev *sd = dev_get_drvdata(dev); + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *sd = i2c_get_clientdata(client); struct imx219 *imx219 = to_imx219(sd); int ret; @@ -1255,11 +1286,13 @@ static const struct v4l2_subdev_video_ops imx219_video_ops = { }; static const struct v4l2_subdev_pad_ops imx219_pad_ops = { - .enum_mbus_code = imx219_enum_mbus_code, - .get_fmt = imx219_get_pad_format, - .set_fmt = imx219_set_pad_format, - .get_selection = imx219_get_selection, - .enum_frame_size = imx219_enum_frame_size, + .init_cfg = imx219_init_cfg, + .enum_mbus_code = imx219_enum_mbus_code, + .get_fmt = v4l2_subdev_get_fmt, + .set_fmt = imx219_set_pad_format, + .get_selection = imx219_get_selection, + .set_routing = imx219_set_routing, + .enum_frame_size = imx219_enum_frame_size, }; static const struct v4l2_subdev_ops imx219_subdev_ops = { @@ -1268,10 +1301,6 @@ static const struct v4l2_subdev_ops imx219_subdev_ops = { .pad = &imx219_pad_ops, }; -static const struct v4l2_subdev_internal_ops imx219_internal_ops = { - .open = imx219_open, -}; - /* Initialize control handlers */ static int imx219_init_controls(struct imx219 *imx219) { @@ -1446,6 +1475,7 @@ static int imx219_check_hwcfg(struct device *dev) static int imx219_probe(struct i2c_client *client) { struct device *dev = &client->dev; + struct v4l2_subdev *sd; struct imx219 *imx219; int ret; @@ -1453,7 +1483,8 @@ static int imx219_probe(struct i2c_client *client) if (!imx219) return -ENOMEM; - v4l2_i2c_subdev_init(&imx219->sd, client, &imx219_subdev_ops); + sd = &imx219->sd; + v4l2_i2c_subdev_init(sd, client, &imx219_subdev_ops); /* Check the hardware configuration in device tree */ if (imx219_check_hwcfg(dev)) @@ -1520,27 +1551,29 @@ static int imx219_probe(struct i2c_client *client) goto error_power_off; /* Initialize subdev */ - imx219->sd.internal_ops = &imx219_internal_ops; - imx219->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | - V4L2_SUBDEV_FL_HAS_EVENTS; - imx219->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | + V4L2_SUBDEV_FL_HAS_EVENTS | + V4L2_SUBDEV_FL_MULTIPLEXED; - /* Initialize source pad */ + /* Initialize the media entity. */ imx219->pad.flags = MEDIA_PAD_FL_SOURCE; - - /* Initialize default format */ - imx219_set_default_format(imx219); - - ret = media_entity_pads_init(&imx219->sd.entity, 1, &imx219->pad); + sd->entity.function = MEDIA_ENT_F_CAM_SENSOR; + ret = media_entity_pads_init(&sd->entity, 1, &imx219->pad); if (ret) { dev_err(dev, "failed to init entity pads: %d\n", ret); goto error_handler_free; } - ret = v4l2_async_register_subdev_sensor(&imx219->sd); + ret = v4l2_subdev_init_finalize(sd); + if (ret) { + dev_err(dev, "failed to finalize sensor init: %d\n", ret); + goto error_media_entity; + } + + ret = v4l2_async_register_subdev_sensor(sd); if (ret < 0) { dev_err(dev, "failed to register sensor sub-device: %d\n", ret); - goto error_media_entity; + goto error_free_state; } /* Enable runtime PM and turn off the device */ @@ -1550,6 +1583,8 @@ static int imx219_probe(struct i2c_client *client) return 0; +error_free_state: + v4l2_subdev_cleanup(sd); error_media_entity: media_entity_cleanup(&imx219->sd.entity); @@ -1568,6 +1603,9 @@ static int imx219_remove(struct i2c_client *client) struct imx219 *imx219 = to_imx219(sd); v4l2_async_unregister_subdev(sd); + + v4l2_subdev_cleanup(sd); + media_entity_cleanup(&sd->entity); imx219_free_controls(imx219);