From patchwork Sun Jan 23 19:42:31 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jeff LaBundy X-Patchwork-Id: 534690 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 282DDC433FE for ; Sun, 23 Jan 2022 19:43:06 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234830AbiAWTnE (ORCPT ); Sun, 23 Jan 2022 14:43:04 -0500 Received: from mail-dm6nam10on2072.outbound.protection.outlook.com ([40.107.93.72]:41949 "EHLO NAM10-DM6-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S230038AbiAWTnB (ORCPT ); Sun, 23 Jan 2022 14:43:01 -0500 ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=hh7pRbcuNbsBFu/aY22/D+AW3evcbtSgb5Q7aMlZRKhj15fI25Iqv4B4nbnsbz9cwAa6fCSj5qrqW4+KekyvmCR4VghY3I9YXGeIxuU7ZZTXtGIwgAE+OpN+uZ9Rl+N/7OdLqS1MKMeb4jcCKbHp2ZS9AJo1/e6jNOavd95wY7W8LJizynNkQJ/P+AuRcL5WF4ySZCqZde6VL9de3UKgv/qWHDyRbI+TtAduBZdWI6fHycshgGxKMbx71Lj2QaCk/KgmM3kbtXnQiHiDKYNAdhMrXKORBfpcVUkpyksig9z3ZIB9EjXABrhb93YZr0mFoqzbtmzH+oqLHHfXasnInA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=Axfw9nnnlOazI/97zHJStx/5z3JyY2OM/uYyma4Y7sc=; b=QU4TMX1keGPuoicd2rIs8zbieE0E5PrNTLodN797qeDNDXAGk/QQ7ag3jTVhon5sz0jtmHavani+td7M43mlPFPnyYUIQhpBTg/hWn17T9zQweB24U7LFYGvpIqvO9TGYHuH3f7C8/XN2aLFG+lkFJvTw2nDBOM5rrZDoZDQFIwlFnMZrHpU+jfanWhB5gDqgAksFRwU9bTcZNU5Vs+AZv7UA4CkREOO82hp/Jd1iEqHTzKiBa/n/6LcDNxCR7kfiNCWQ1BNZtGSciTMVR7PQcOYADgRFr8V9dWeXGlWiswT8sXVCPuAO+1NWmYxT10vLbyjak2eB7JADneIwxenvw== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=none; dmarc=none; dkim=none; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=NETORG5796793.onmicrosoft.com; s=selector1-NETORG5796793-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=Axfw9nnnlOazI/97zHJStx/5z3JyY2OM/uYyma4Y7sc=; b=PSGNoAXiCBdMA9kCg0gbXtma7pBl6zKyqJG9+0bg9WfUpqwXNwdRS8L5DSextLbpx3LECtpKQvSWjCjNNJ7vbI1Y65w6pfliTdo1T2t2pTWavBCdbYry1owbscd/lI/qYjNN0tuxppS0Odjfig8/Jpnoteh0qu7NsM1vtfYtFxQ= Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=labundy.com; Received: from SJ0PR08MB6544.namprd08.prod.outlook.com (2603:10b6:a03:2d3::16) by SN6PR08MB4783.namprd08.prod.outlook.com (2603:10b6:805:69::12) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.4909.14; Sun, 23 Jan 2022 19:42:58 +0000 Received: from SJ0PR08MB6544.namprd08.prod.outlook.com ([fe80::e8be:49c5:397e:d3ba]) by SJ0PR08MB6544.namprd08.prod.outlook.com ([fe80::e8be:49c5:397e:d3ba%5]) with mapi id 15.20.4909.017; Sun, 23 Jan 2022 19:42:58 +0000 From: Jeff LaBundy To: dmitry.torokhov@gmail.com, robh+dt@kernel.org Cc: linux-input@vger.kernel.org, devicetree@vger.kernel.org, Jeff LaBundy Subject: [PATCH 1/2] dt-bindings: input: Add bindings for Azoteq IQS7222A/B/C Date: Sun, 23 Jan 2022 13:42:31 -0600 Message-Id: <20220123194232.85288-2-jeff@labundy.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20220123194232.85288-1-jeff@labundy.com> References: <20220123194232.85288-1-jeff@labundy.com> X-ClientProxiedBy: SA0PR11CA0064.namprd11.prod.outlook.com (2603:10b6:806:d2::9) To SJ0PR08MB6544.namprd08.prod.outlook.com (2603:10b6:a03:2d3::16) MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-Office365-Filtering-Correlation-Id: b4e0b1e8-d8fe-4b9e-0a0b-08d9dea88e82 X-MS-TrafficTypeDiagnostic: SN6PR08MB4783:EE_ X-Microsoft-Antispam-PRVS: X-MS-Oob-TLC-OOBClassifiers: OLM:2000; X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:SJ0PR08MB6544.namprd08.prod.outlook.com; PTR:; CAT:NONE; SFS:(376002)(346002)(39830400003)(136003)(366004)(396003)(508600001)(107886003)(5660300002)(66556008)(26005)(316002)(1076003)(66946007)(66476007)(966005)(2906002)(30864003)(6486002)(83380400001)(52116002)(4326008)(6666004)(8936002)(38100700002)(186003)(8676002)(6512007)(86362001)(6506007)(36756003)(2616005)(38350700002); DIR:OUT; SFP:1101; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: labundy.com X-MS-Exchange-CrossTenant-Network-Message-Id: b4e0b1e8-d8fe-4b9e-0a0b-08d9dea88e82 X-MS-Exchange-CrossTenant-AuthSource: SJ0PR08MB6544.namprd08.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 23 Jan 2022 19:42:57.7487 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: 00b69d09-acab-4585-aca7-8fb7c6323e6f X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: +RCQqwB/8y+54KqfNrJLH4P3zIes/FB40SR21TNa1bEXc+fCmLMvSedhbjcdmRAY4slJVPV/f/hEDTK6X4dXfw== X-MS-Exchange-Transport-CrossTenantHeadersStamped: SN6PR08MB4783 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org This patch adds bindings for the Azoteq IQS7222A/B/C family of capacitive touch controllers. Signed-off-by: Jeff LaBundy --- .../devicetree/bindings/input/iqs7222.yaml | 967 ++++++++++++++++++ 1 file changed, 967 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/iqs7222.yaml diff --git a/Documentation/devicetree/bindings/input/iqs7222.yaml b/Documentation/devicetree/bindings/input/iqs7222.yaml new file mode 100644 index 000000000000..0c23d1d49ebd --- /dev/null +++ b/Documentation/devicetree/bindings/input/iqs7222.yaml @@ -0,0 +1,967 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/iqs7222.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Azoteq IQS7222A/B/C Capacitive Touch Controller + +maintainers: + - Jeff LaBundy + +description: | + The Azoteq IQS7222A, IQS7222B and IQS7222C are multichannel capacitive touch + controllers that feature additional sensing capabilities. + + Link to datasheets: https://www.azoteq.com/ + +properties: + compatible: + enum: + - azoteq,iqs7222a + - azoteq,iqs7222b + - azoteq,iqs7222c + + reg: + maxItems: 1 + + irq-gpios: + maxItems: 1 + description: + Specifies the GPIO connected to the device's active-low RDY output. + + reset-gpios: + maxItems: 1 + description: + Specifies the GPIO connected to the device's active-low MCLR input. The + device is temporarily held in hardware reset prior to initialization if + this property is present. + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + azoteq,rf-filt-enable: + type: boolean + description: Enables the device's internal RF filter. + + azoteq,max-counts: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the maximum counts as follows: + 0: 1023 + 1: 2047 + 2: 4095 + 3: 16384 + + azoteq,auto-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the number of conversions to occur before an interrupt is + generated as follows: + 0: 4 + 1: 8 + 2: 16 + 3: 32 + + azoteq,ati-frac-div-fine: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the preloaded ATI fine fractional divider. + + azoteq,ati-frac-div-coarse: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the preloaded ATI coarse fractional divider. + + azoteq,ati-comp-select: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1023 + description: Specifies the preloaded ATI compensation selection. + + azoteq,lta-beta-lp: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the long-term average filter damping factor to be applied during + low-power mode. + + azoteq,lta-beta-np: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the long-term average filter damping factor to be applied during + normal-power mode. + + azoteq,counts-beta-lp: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the counts filter damping factor to be applied during low-power + mode. + + azoteq,counts-beta-np: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the counts filter damping factor to be applied during normal- + power mode. + + azoteq,lta-fast-beta-lp: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the long-term average filter fast damping factor to be applied + during low-power mode. + + azoteq,lta-fast-beta-np: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the long-term average filter fast damping factor to be applied + during normal-power mode. + + azoteq,timeout-ati-ms: + multipleOf: 500 + minimum: 0 + maximum: 32767500 + description: + Specifies the delay (in ms) before ATI is retried following an ATI error. + + azoteq,rate-ati-ms: + minimum: 0 + maximum: 65535 + description: Specifies the rate (in ms) at which ATI status is evaluated. + + azoteq,timeout-np-ms: + minimum: 0 + maximum: 65535 + description: + Specifies the length of time (in ms) to wait for an event before moving + from normal-power mode to low-power mode. + + azoteq,rate-np-ms: + minimum: 0 + maximum: 3000 + description: Specifies the report rate (in ms) during normal-power mode. + + azoteq,timeout-lp-ms: + minimum: 0 + maximum: 65535 + description: + Specifies the length of time (in ms) to wait for an event before moving + from low-power mode to ultra-low-power mode. + + azoteq,rate-lp-ms: + minimum: 0 + maximum: 3000 + description: Specifies the report rate (in ms) during low-power mode. + + azoteq,timeout-ulp-ms: + minimum: 0 + maximum: 65535 + description: + Specifies the rate (in ms) at which channels not regularly sampled during + ultra-low-power mode are updated. + + azoteq,rate-ulp-ms: + minimum: 0 + maximum: 3000 + description: Specifies the report rate (in ms) during ultra-low-power mode. + +patternProperties: + "^cycle-[0-9]$": + type: object + description: Represents a conversion cycle serving two sensing channels. + + properties: + azoteq,conv-period: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the cycle's conversion period. + + azoteq,conv-frac: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the cycle's conversion frequency fraction. + + azoteq,tx-enable: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 9 + items: + minimum: 0 + maximum: 8 + description: Specifies the CTx pin(s) associated with the cycle. + + azoteq,rx-float-inactive: + type: boolean + description: Floats any inactive CRx pins instead of grounding them. + + azoteq,dead-time-enable: + type: boolean + description: + Increases the denominator of the conversion frequency formula by one. + + azoteq,tx-freq-fosc: + type: boolean + description: + Fixes the conversion frequency to that of the device's core clock. + + azoteq,vbias-enable: + type: boolean + description: Enables the bias voltage for use during inductive sensing. + + azoteq,sense-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the cycle's sensing mode as follows: + 0: None + 1: Self capacitive + 2: Mutual capacitive + 3: Inductive + + Note that in the case of IQS7222A, cycles 5 and 6 are restricted to + Hall-effect sensing. + + azoteq,iref-enable: + type: boolean + description: + Enables the current reference for use during various sensing modes. + + azoteq,iref-level: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the cycle's current reference level. + + azoteq,iref-trim: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the cycle's current reference trim. + + dependencies: + azoteq,iref-level: ["azoteq,iref-enable"] + azoteq,iref-trim: ["azoteq,iref-enable"] + + additionalProperties: false + + "^channel-[0-19]$": + type: object + description: + Represents a single sensing channel. A channel is active if defined and + inactive otherwise. + + Note that in the case of IQS7222A, channels 10 and 11 are restricted to + Hall-effect sensing with events reported on channel 10 only. + + properties: + azoteq,ulp-allow: + type: boolean + description: + Permits the device to enter ultra-low-power mode while the channel + lies in a state of touch or proximity. + + azoteq,ref-select: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 9 + description: Specifies a separate reference channel to be followed. + + azoteq,ref-weight: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: Specifies the relative weight of the reference channel. + + azoteq,use-prox: + type: boolean + description: + Activates the reference channel in response to proximity events + instead of touch events. + + azoteq,ati-band: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the channel's ATI band as a fraction of its ATI target as + follows: + 0: 1/16 + 1: 1/8 + 2: 1/4 + 3: 1/2 + + azoteq,global-halt: + type: boolean + description: + Specifies that the channel's long-term average is to freeze if any + other participating channel lies in a proximity or touch state. + + azoteq,invert-enable: + type: boolean + description: + Inverts the polarity of the states reported for proximity and touch + events relative to their respective thresholds. + + azoteq,dual-direction: + type: boolean + description: + Specifies that the channel's long-term average is to freeze in the + presence of either increasing or decreasing counts, thereby permit- + ting events to be reported in either direction. + + azoteq,rx-enable: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + items: + minimum: 0 + maximum: 7 + description: Specifies the CRx pin(s) associated with the channel. + + azoteq,samp-cap-double: + type: boolean + description: Doubles the sampling capacitance from 40 pF to 80 pF. + + azoteq,vref-half: + type: boolean + description: Halves the discharge threshold from 1.0 V to 0.5 V. + + azoteq,proj-bias: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the bias current applied during mutual (projected) + capacitive sensing as follows: + 0: 2 uA + 1: 5 uA + 2: 7 uA + 3: 10 uA + + azoteq,ati-target: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 8 + minimum: 0 + maximum: 2040 + description: Specifies the channel's ATI target. + + azoteq,ati-base: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 16 + minimum: 0 + maximum: 496 + description: Specifies the channel's ATI base. + + azoteq,ati-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5] + description: | + Specifies the channel's ATI mode as follows: + 0: Disabled + 1: Compensation + 2: Compensation divider + 3: Fine fractional divider + 4: Coarse fractional divider + 5: Full + + azoteq,ati-frac-div-fine: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the channel's ATI fine fractional divider. + + azoteq,ati-frac-mult-coarse: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the channel's ATI coarse fractional multiplier. + + azoteq,ati-frac-div-coarse: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the channel's ATI coarse fractional divider. + + azoteq,ati-comp-div: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 + description: Specifies the channel's ATI compensation divider. + + azoteq,ati-comp-select: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1023 + description: Specifies the channel's ATI compensation selection. + + azoteq,debounce-enter: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the channel's debounce entrance factor. + + azoteq,debounce-exit: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: Specifies the channel's debounce exit factor. + + patternProperties: + "^event-(prox|touch)$": + type: object + description: + Represents a proximity or touch event reported by the channel. + + properties: + azoteq,gpio-select: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 3 + items: + minimum: 0 + maximum: 2 + description: | + Specifies one or more GPIO mapped to the event as follows: + 0: GPIO0 + 1: GPIO3 (IQS7222C only) + 2: GPIO4 (IQS7222C only) + + Note that although multiple events can be mapped to a single + GPIO, they must all be of the same type (proximity, touch or + slider gesture). + + azoteq,thresh: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Specifies the threshold for the event. Valid entries range from + 0-127 and 0-255 for proximity and touch events, respectively. + + azoteq,hyst: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: + Specifies the hysteresis for the event (touch events only). + + azoteq,timeout-press-ms: + multipleOf: 500 + minimum: 0 + maximum: 127500 + description: + Specifies the length of time (in ms) to wait before automatically + releasing a press event. Specify zero to allow the press state to + persist indefinitely. + + The IQS7222B does not feature channel-specific timeouts; the time- + out specified for any one channel applies to all channels. + + linux,code: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Numeric key or switch code associated with the event. Specify + KEY_RESERVED (0) to opt out of event reporting. + + linux,input-type: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 5] + default: 1 + description: + Specifies whether the event is to be interpreted as a key (1) + or a switch (5). + + required: + - linux,code + + additionalProperties: false + + dependencies: + azoteq,ref-weight: ["azoteq,ref-select"] + azoteq,use-prox: ["azoteq,ref-select"] + + additionalProperties: false + + "^slider-[0-1]$": + type: object + description: Represents a slider comprising three or four channels. + + properties: + azoteq,channel-select: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 4 + items: + minimum: 0 + maximum: 9 + description: + Specifies the order of the channels that participate in the slider. + + azoteq,slider-size: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: + Specifies the slider's one-dimensional resolution, equal to the + maximum coordinate plus one. + + azoteq,lower-cal: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the slider's lower starting point. + + azoteq,upper-cal: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the slider's upper starting point. + + azoteq,top-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 65535 + description: + Specifies the speed of movement after which coordinate filtering is + no longer applied. + + azoteq,bottom-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 4 + minimum: 0 + maximum: 1020 + description: + Specifies the speed of movement after which coordinate filtering is + linearly reduced. + + azoteq,bottom-beta: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + description: + Specifies the coordinate filter damping factor to be applied + while the speed of movement is below that which is specified + by azoteq,bottom-speed. + + azoteq,static-beta: + type: boolean + description: + Applies the coordinate filter damping factor specified by + azoteq,bottom-beta regardless of the speed of movement. + + azoteq,use-prox: + type: boolean + description: + Directs the slider to respond to the proximity states of the selected + channels instead of their corresponding touch states. Note the slider + cannot report granular coordinates during a state of proximity. + + linux,axis: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Specifies the absolute axis to which coordinates are mapped. Specify + ABS_WHEEL to operate the slider as a wheel (IQS7222C only). + + patternProperties: + "^event-(press|tap|(swipe|flick)-(pos|neg))$": + type: object + description: + Represents a press or gesture (IQS7222A only) event reported by + the slider. + + properties: + linux,code: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Numeric key code associated with the event. + + azoteq,gesture-max-ms: + multipleOf: 4 + minimum: 0 + maximum: 1020 + description: + Specifies the length of time (in ms) within which a tap, swipe + or flick gesture must be completed in order to be acknowledged + by the device. The number specified for any one swipe or flick + gesture applies to all remaining swipe or flick gestures. + + azoteq,gesture-min-ms: + multipleOf: 4 + minimum: 0 + maximum: 124 + description: + Specifies the length of time (in ms) for which a tap gesture must + be held in order to be acknowledged by the device. + + azoteq,gesture-dist: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 16 + minimum: 0 + maximum: 4080 + description: + Specifies the distance across which a swipe or flick gesture must + travel in order to be acknowledged by the device. The number spec- + ified for any one swipe or flick gesture applies to all remaining + swipe or flick gestures. + + azoteq,gpio-select: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 1 + items: + minimum: 0 + maximum: 0 + description: | + Specifies an individual GPIO mapped to a tap, swipe or flick + gesture as follows: + 0: GPIO0 + 1: GPIO3 (reserved) + 2: GPIO4 (reserved) + + Note that although multiple events can be mapped to a single + GPIO, they must all be of the same type (proximity, touch or + slider gesture). + + required: + - linux,code + + additionalProperties: false + + required: + - azoteq,channel-select + + additionalProperties: false + + "^gpio-[0-2]$": + type: object + description: | + Represents a GPIO mapped to one or more events as follows: + gpio-0: GPIO0 + gpio-1: GPIO3 (IQS7222C only) + gpio-2: GPIO4 (IQS7222C only) + + allOf: + - $ref: ../pinctrl/pincfg-node.yaml# + + properties: + drive-open-drain: true + + additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + const: azoteq,iqs7222b + + then: + patternProperties: + "^cycle-[0-9]$": + properties: + azoteq,iref-enable: false + + "^channel-[0-19]$": + properties: + azoteq,ref-select: false + + patternProperties: + "^event-(prox|touch)$": + properties: + azoteq,gpio-select: false + + "^slider-[0-1]$": false + + "^gpio-[0-2]$": false + + - if: + properties: + compatible: + contains: + const: azoteq,iqs7222a + + then: + patternProperties: + "^channel-[0-19]$": + patternProperties: + "^event-(prox|touch)$": + properties: + azoteq,gpio-select: + maxItems: 1 + items: + maximum: 0 + + "^slider-[0-1]$": + properties: + azoteq,slider-size: + multipleOf: 16 + maximum: 4080 + + azoteq,top-speed: + multipleOf: 4 + maximum: 1020 + + else: + patternProperties: + "^channel-[0-19]$": + properties: + azoteq,ulp-allow: false + + "^slider-[0-1]$": + patternProperties: + "^event-(press|tap|(swipe|flick)-(pos|neg))$": + properties: + azoteq,gesture-max-ms: false + + azoteq,gesture-min-ms: false + + azoteq,gesture-dist: false + + azoteq,gpio-select: false + +required: + - compatible + - reg + - irq-gpios + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + iqs7222a@44 { + compatible = "azoteq,iqs7222a"; + reg = <0x44>; + irq-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + azoteq,lta-beta-lp = <7>; + azoteq,lta-beta-np = <8>; + azoteq,counts-beta-lp = <2>; + azoteq,counts-beta-np = <3>; + azoteq,lta-fast-beta-lp = <3>; + azoteq,lta-fast-beta-np = <4>; + + cycle-0 { + azoteq,conv-period = <5>; + azoteq,conv-frac = <127>; + azoteq,tx-enable = <1>, <2>, <4>, <5>; + azoteq,dead-time-enable; + azoteq,sense-mode = <2>; + }; + + cycle-1 { + azoteq,conv-period = <5>; + azoteq,conv-frac = <127>; + azoteq,tx-enable = <5>; + azoteq,dead-time-enable; + azoteq,sense-mode = <2>; + }; + + cycle-2 { + azoteq,conv-period = <5>; + azoteq,conv-frac = <127>; + azoteq,tx-enable = <4>; + azoteq,dead-time-enable; + azoteq,sense-mode = <2>; + }; + + cycle-3 { + azoteq,conv-period = <5>; + azoteq,conv-frac = <127>; + azoteq,tx-enable = <2>; + azoteq,dead-time-enable; + azoteq,sense-mode = <2>; + }; + + cycle-4 { + azoteq,conv-period = <5>; + azoteq,conv-frac = <127>; + azoteq,tx-enable = <1>; + azoteq,dead-time-enable; + azoteq,sense-mode = <2>; + }; + + cycle-5 { + azoteq,conv-period = <2>; + azoteq,conv-frac = <0>; + }; + + cycle-6 { + azoteq,conv-period = <2>; + azoteq,conv-frac = <0>; + }; + + channel-0 { + azoteq,ulp-allow; + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <3>; + azoteq,ati-target = <800>; + azoteq,ati-base = <208>; + azoteq,ati-mode = <5>; + }; + + channel-1 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <3>; + azoteq,ati-target = <496>; + azoteq,ati-base = <208>; + azoteq,ati-mode = <5>; + }; + + channel-2 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <3>; + azoteq,ati-target = <496>; + azoteq,ati-base = <208>; + azoteq,ati-mode = <5>; + }; + + channel-3 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <3>; + azoteq,ati-target = <496>; + azoteq,ati-base = <208>; + azoteq,ati-mode = <5>; + }; + + channel-4 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <3>; + azoteq,ati-target = <496>; + azoteq,ati-base = <208>; + azoteq,ati-mode = <5>; + }; + + channel-5 { + azoteq,ulp-allow; + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <6>; + azoteq,ati-target = <800>; + azoteq,ati-base = <144>; + azoteq,ati-mode = <5>; + }; + + channel-6 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <6>; + azoteq,ati-target = <496>; + azoteq,ati-base = <160>; + azoteq,ati-mode = <5>; + + event-touch { + linux,code = ; + }; + }; + + channel-7 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <6>; + azoteq,ati-target = <496>; + azoteq,ati-base = <160>; + azoteq,ati-mode = <5>; + + event-touch { + linux,code = ; + }; + }; + + channel-8 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <6>; + azoteq,ati-target = <496>; + azoteq,ati-base = <160>; + azoteq,ati-mode = <5>; + + event-touch { + linux,code = ; + }; + }; + + channel-9 { + azoteq,global-halt; + azoteq,invert-enable; + azoteq,rx-enable = <6>; + azoteq,ati-target = <496>; + azoteq,ati-base = <160>; + azoteq,ati-mode = <5>; + + event-touch { + linux,code = ; + }; + }; + + channel-10 { + azoteq,ulp-allow; + azoteq,ati-target = <496>; + azoteq,ati-base = <112>; + + event-touch { + linux,code = ; + linux,input-type = ; + }; + }; + + channel-11 { + azoteq,ati-target = <496>; + azoteq,ati-base = <112>; + }; + + slider-0 { + azoteq,channel-select = <1>, <2>, <3>, <4>; + azoteq,slider-size = <4080>; + azoteq,upper-cal = <50>; + azoteq,lower-cal = <30>; + azoteq,top-speed = <200>; + azoteq,bottom-speed = <1>; + azoteq,bottom-beta = <3>; + + event-tap { + linux,code = ; + azoteq,gesture-max-ms = <600>; + azoteq,gesture-min-ms = <24>; + }; + + event-flick-pos { + linux,code = ; + azoteq,gesture-max-ms = <600>; + azoteq,gesture-dist = <816>; + }; + + event-flick-neg { + linux,code = ; + }; + }; + }; + }; + +... From patchwork Sun Jan 23 19:42:32 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jeff LaBundy X-Patchwork-Id: 534689 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 081C5C43217 for ; Sun, 23 Jan 2022 19:43:09 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234853AbiAWTnG (ORCPT ); Sun, 23 Jan 2022 14:43:06 -0500 Received: from mail-dm6nam10on2072.outbound.protection.outlook.com ([40.107.93.72]:41949 "EHLO NAM10-DM6-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S229681AbiAWTnC (ORCPT ); Sun, 23 Jan 2022 14:43:02 -0500 ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=A4k0CusRoIH+Pnc4HeweNj+NxPxNUTDho6i8u4MYe+qGlVCTu28L7qaDXnHDKor/gxncv9h2c2/xm8w5qmKEbAGTExezyDdrKQkStLZiWiBch6MhXacQU5V1csCrgeIkGTgmpV86Y0AEw93ECdijKOR8agIz0avbB4zweEtaR6RPDWsCEyoK0JEKflZWzwQ4+V/1slEssxyb8iP5JowbwJd4Rio9G/yyqbnFaOuEdRovNJxRVWNiwq61uG/IZfBYqtaWfZtVt/uxch1MLkcr/nY4XBO7I68oXJT06OuUbnYSK+XQktVGaEjbl2ZbYwQ9/0EidEFPpPx6dOUa3bk0Ag== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=2yrm0EBnGri1FSJQucChbd+pKgkLmJgdpB60s6nPvbw=; b=SL/NOi7QaFBPdPOBySBbfz94WJz6y4Qz5BOw8nL6afjJhlxgkfLYiFlCEHeoTKvQ92eNaocO4bc+qXyQH2zZW1RepQkkccKR/kEnU8uNn4uDKi32sEfrcGSeHZWmaaHat1QfPlurCoYlYEtGwSDR7nOwIZWsVYxyDSFCSAAEG4E16f0LhaHy4UpSeB7L6f7R+vxcQ68zdeZ+ZHp3Z100XfQVHftOberMdmBv0dyNlsBYZBsdhnEPB551gRDxpjQirO2bihNAmZ6c4sSvK4e12zfPJjvLqAG5CXAcVTbVPKOc1UukCahsZfPAsSvfm5PuvYMpvcEHSwKcar2HhKYPCg== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=none; dmarc=none; dkim=none; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=NETORG5796793.onmicrosoft.com; s=selector1-NETORG5796793-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=2yrm0EBnGri1FSJQucChbd+pKgkLmJgdpB60s6nPvbw=; b=YSM1CkLTXihr/BuHbsrexZrljA4V090oa3f0MI7Kp6OMiegyGdPVjX6TYIBPUHMnnTchVb08SbzqGwr/FoUHoTOfk+aV1Yc7/FbJooMYhHwRnSg0o1CZaFk+oVyce5rQuTemHlKc48zF0UQs786OPErvkj0ksb6XMw2f4k2lsyQ= Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=labundy.com; Received: from SJ0PR08MB6544.namprd08.prod.outlook.com (2603:10b6:a03:2d3::16) by SN6PR08MB4783.namprd08.prod.outlook.com (2603:10b6:805:69::12) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.4909.14; Sun, 23 Jan 2022 19:42:58 +0000 Received: from SJ0PR08MB6544.namprd08.prod.outlook.com ([fe80::e8be:49c5:397e:d3ba]) by SJ0PR08MB6544.namprd08.prod.outlook.com ([fe80::e8be:49c5:397e:d3ba%5]) with mapi id 15.20.4909.017; Sun, 23 Jan 2022 19:42:58 +0000 From: Jeff LaBundy To: dmitry.torokhov@gmail.com, robh+dt@kernel.org Cc: linux-input@vger.kernel.org, devicetree@vger.kernel.org, Jeff LaBundy Subject: [PATCH 2/2] Input: add support for Azoteq IQS7222A/B/C Date: Sun, 23 Jan 2022 13:42:32 -0600 Message-Id: <20220123194232.85288-3-jeff@labundy.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20220123194232.85288-1-jeff@labundy.com> References: <20220123194232.85288-1-jeff@labundy.com> X-ClientProxiedBy: SA0PR11CA0064.namprd11.prod.outlook.com (2603:10b6:806:d2::9) To SJ0PR08MB6544.namprd08.prod.outlook.com (2603:10b6:a03:2d3::16) MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-Office365-Filtering-Correlation-Id: b4f5dd66-d2e9-4e4a-3ad8-08d9dea88eda X-MS-TrafficTypeDiagnostic: SN6PR08MB4783:EE_ X-Microsoft-Antispam-PRVS: X-MS-Oob-TLC-OOBClassifiers: OLM:6108; X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:SJ0PR08MB6544.namprd08.prod.outlook.com; PTR:; CAT:NONE; SFS:(376002)(346002)(39830400003)(136003)(366004)(396003)(508600001)(107886003)(5660300002)(66556008)(26005)(316002)(1076003)(66946007)(66476007)(2906002)(30864003)(6486002)(83380400001)(52116002)(4326008)(6666004)(8936002)(38100700002)(186003)(8676002)(6512007)(86362001)(6506007)(36756003)(2616005)(38350700002)(579004)(559001); DIR:OUT; SFP:1101; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: labundy.com X-MS-Exchange-CrossTenant-Network-Message-Id: b4f5dd66-d2e9-4e4a-3ad8-08d9dea88eda X-MS-Exchange-CrossTenant-AuthSource: SJ0PR08MB6544.namprd08.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 23 Jan 2022 19:42:58.3268 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: 00b69d09-acab-4585-aca7-8fb7c6323e6f X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: /XA/NAFyLW9TyZEsE2wxdX36Pe6koH3tupBf0Ha5I7pBgdv+muCZatBj+dqL1ZECj+Xlrb6JjSvv1svoQG1Xjw== X-MS-Exchange-Transport-CrossTenantHeadersStamped: SN6PR08MB4783 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org This patch adds support for the Azoteq IQS7222A/B/C family of capacitive touch controllers. Signed-off-by: Jeff LaBundy --- drivers/input/misc/Kconfig | 10 + drivers/input/misc/Makefile | 1 + drivers/input/misc/iqs7222.c | 2385 ++++++++++++++++++++++++++++++++++ 3 files changed, 2396 insertions(+) create mode 100644 drivers/input/misc/iqs7222.c diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index dd5227cf8696..a18ab7358d8f 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -762,6 +762,16 @@ config INPUT_IQS626A To compile this driver as a module, choose M here: the module will be called iqs626a. +config INPUT_IQS7222 + tristate "Azoteq IQS7222A/B/C capacitive touch controller" + depends on I2C + help + Say Y to enable support for the Azoteq IQS7222A/B/C family + of capacitive touch controllers. + + To compile this driver as a module, choose M here: the + module will be called iqs7222. + config INPUT_CMA3000 tristate "VTI CMA3000 Tri-axis accelerometer" help diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index b92c53a6b5ae..28dfc444f0a9 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o obj-$(CONFIG_INPUT_IQS269A) += iqs269a.o obj-$(CONFIG_INPUT_IQS626A) += iqs626a.o +obj-$(CONFIG_INPUT_IQS7222) += iqs7222.o obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o diff --git a/drivers/input/misc/iqs7222.c b/drivers/input/misc/iqs7222.c new file mode 100644 index 000000000000..806cd54d593a --- /dev/null +++ b/drivers/input/misc/iqs7222.c @@ -0,0 +1,2385 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Azoteq IQS7222A/B/C Capacitive Touch Controller + * + * Copyright (C) 2022 Jeff LaBundy + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define IQS7222_PROD_NUM 0x00 +#define IQS7222_PROD_NUM_A 840 +#define IQS7222_PROD_NUM_B 698 +#define IQS7222_PROD_NUM_C 863 + +#define IQS7222_SYS_STATUS 0x10 +#define IQS7222_SYS_STATUS_RESET BIT(3) +#define IQS7222_SYS_STATUS_ATI_ERROR BIT(1) +#define IQS7222_SYS_STATUS_ATI_ACTIVE BIT(0) + +#define IQS7222_CHAN_SETUP_0_REF_MODE_MASK GENMASK(15, 14) +#define IQS7222_CHAN_SETUP_0_REF_MODE_FOLLOW BIT(15) +#define IQS7222_CHAN_SETUP_0_REF_MODE_REF BIT(14) +#define IQS7222_CHAN_SETUP_0_CHAN_EN BIT(8) + +#define IQS7222_SLDR_SETUP_0_CHAN_CNT_MASK GENMASK(2, 0) +#define IQS7222_SLDR_SETUP_2_RES_MASK GENMASK(15, 8) +#define IQS7222_SLDR_SETUP_2_RES_SHIFT 8 +#define IQS7222_SLDR_SETUP_2_TOP_SPEED_MASK GENMASK(7, 0) +#define IQS7222_SLDR_SETUP_3_CHAN_SEL_MASK GENMASK(9, 0) + +#define IQS7222_GPIO_SETUP_0_GPIO_EN BIT(0) + +#define IQS7222_SYS_SETUP 0xD0 +#define IQS7222_SYS_SETUP_INTF_MODE_MASK GENMASK(7, 6) +#define IQS7222_SYS_SETUP_INTF_MODE_TOUCH BIT(7) +#define IQS7222_SYS_SETUP_INTF_MODE_EVENT BIT(6) +#define IQS7222_SYS_SETUP_PWR_MODE_MASK GENMASK(5, 4) +#define IQS7222_SYS_SETUP_PWR_MODE_AUTO IQS7222_SYS_SETUP_PWR_MODE_MASK +#define IQS7222_SYS_SETUP_REDO_ATI BIT(2) +#define IQS7222_SYS_SETUP_ACK_RESET BIT(0) + +#define IQS7222_EVENT_MASK_ATI BIT(12) +#define IQS7222_COMMS_HOLD BIT(0) +#define IQS7222_COMMS_ERROR 0xEEEE + +#define IQS7222_MAX_COLS_STAT 8 +#define IQS7222_MAX_COLS_CYCLE 3 +#define IQS7222_MAX_COLS_GLBL 3 +#define IQS7222_MAX_COLS_BTN 3 +#define IQS7222_MAX_COLS_CHAN 6 +#define IQS7222_MAX_COLS_FILT 2 +#define IQS7222_MAX_COLS_SLDR 11 +#define IQS7222_MAX_COLS_GPIO 3 +#define IQS7222_MAX_COLS_SYS 13 +#define IQS7222_MAX_COLS_ALL IQS7222_MAX_COLS_SYS + +#define IQS7222_MAX_CHAN 20 +#define IQS7222_MAX_SLDR 2 + +#define IQS7222_ATI_TIMEOUT_MS 2000 +#define IQS7222_IRQ_TIMEOUT_MS 100 +#define IQS7222_NUM_RETRIES 5 +#define IQS7222_REG_OFFSET 0x100 + +enum iqs7222_reg_key_id { + IQS7222_REG_KEY_NONE, + IQS7222_REG_KEY_PROX, + IQS7222_REG_KEY_TOUCH, + IQS7222_REG_KEY_DEBOUNCE, + IQS7222_REG_KEY_TAP, + IQS7222_REG_KEY_AXIAL, + IQS7222_REG_KEY_WHEEL, + IQS7222_REG_KEY_NO_WHEEL, + IQS7222_REG_KEY_RESERVED +}; + +enum iqs7222_reg_grp_id { + IQS7222_REG_GRP_STAT, + IQS7222_REG_GRP_CYCLE, + IQS7222_REG_GRP_GLBL, + IQS7222_REG_GRP_BTN, + IQS7222_REG_GRP_CHAN, + IQS7222_REG_GRP_FILT, + IQS7222_REG_GRP_SLDR, + IQS7222_REG_GRP_GPIO, + IQS7222_REG_GRP_SYS, + IQS7222_NUM_REG_GRPS +}; + +static const char * const iqs7222_reg_grp_names[] = { + [IQS7222_REG_GRP_CYCLE] = "cycle", + [IQS7222_REG_GRP_CHAN] = "channel", + [IQS7222_REG_GRP_SLDR] = "slider", + [IQS7222_REG_GRP_GPIO] = "gpio", +}; + +static const unsigned int iqs7222_max_cols[] = { + [IQS7222_REG_GRP_STAT] = IQS7222_MAX_COLS_STAT, + [IQS7222_REG_GRP_CYCLE] = IQS7222_MAX_COLS_CYCLE, + [IQS7222_REG_GRP_GLBL] = IQS7222_MAX_COLS_GLBL, + [IQS7222_REG_GRP_BTN] = IQS7222_MAX_COLS_BTN, + [IQS7222_REG_GRP_CHAN] = IQS7222_MAX_COLS_CHAN, + [IQS7222_REG_GRP_FILT] = IQS7222_MAX_COLS_FILT, + [IQS7222_REG_GRP_SLDR] = IQS7222_MAX_COLS_SLDR, + [IQS7222_REG_GRP_GPIO] = IQS7222_MAX_COLS_GPIO, + [IQS7222_REG_GRP_SYS] = IQS7222_MAX_COLS_SYS, +}; + +static const unsigned int iqs7222_gpio_links[] = { 2, 5, 6, }; + +struct iqs7222_event_desc { + const char *name; + u16 mask; + u16 val; + u16 enable; + enum iqs7222_reg_key_id reg_key; +}; + +static const struct iqs7222_event_desc iqs7222_kp_events[] = { + { + .name = "event-prox", + .enable = BIT(0), + .reg_key = IQS7222_REG_KEY_PROX, + }, + { + .name = "event-touch", + .enable = BIT(1), + .reg_key = IQS7222_REG_KEY_TOUCH, + }, +}; + +static const struct iqs7222_event_desc iqs7222_sl_events[] = { + { .name = "event-press", }, + { + .name = "event-tap", + .mask = BIT(0), + .val = BIT(0), + .enable = BIT(0), + .reg_key = IQS7222_REG_KEY_TAP, + }, + { + .name = "event-swipe-pos", + .mask = BIT(5) | BIT(1), + .val = BIT(1), + .enable = BIT(1), + .reg_key = IQS7222_REG_KEY_AXIAL, + }, + { + .name = "event-swipe-neg", + .mask = BIT(5) | BIT(1), + .val = BIT(5) | BIT(1), + .enable = BIT(1), + .reg_key = IQS7222_REG_KEY_AXIAL, + }, + { + .name = "event-flick-pos", + .mask = BIT(5) | BIT(2), + .val = BIT(2), + .enable = BIT(2), + .reg_key = IQS7222_REG_KEY_AXIAL, + }, + { + .name = "event-flick-neg", + .mask = BIT(5) | BIT(2), + .val = BIT(5) | BIT(2), + .enable = BIT(2), + .reg_key = IQS7222_REG_KEY_AXIAL, + }, +}; + +struct iqs7222_reg_grp_desc { + u16 base; + int num_row; + int num_col; +}; + +struct iqs7222_dev_desc { + u16 prod_num; + u16 fw_major; + u16 fw_minor; + u16 sldr_res; + u16 touch_link; + u16 wheel_enable; + int allow_offset; + int event_offset; + int comms_offset; + struct iqs7222_reg_grp_desc reg_grps[IQS7222_NUM_REG_GRPS]; +}; + +static const struct iqs7222_dev_desc iqs7222_devs[] = { + { + .prod_num = IQS7222_PROD_NUM_A, + .fw_major = 1, + .fw_minor = 12, + .sldr_res = U8_MAX * 16, + .touch_link = 1768, + .allow_offset = 9, + .event_offset = 10, + .comms_offset = 12, + .reg_grps = { + [IQS7222_REG_GRP_STAT] = { + .base = IQS7222_SYS_STATUS, + .num_row = 1, + .num_col = 8, + }, + [IQS7222_REG_GRP_CYCLE] = { + .base = 0x8000, + .num_row = 7, + .num_col = 3, + }, + [IQS7222_REG_GRP_GLBL] = { + .base = 0x8700, + .num_row = 1, + .num_col = 3, + }, + [IQS7222_REG_GRP_BTN] = { + .base = 0x9000, + .num_row = 12, + .num_col = 3, + }, + [IQS7222_REG_GRP_CHAN] = { + .base = 0xA000, + .num_row = 12, + .num_col = 6, + }, + [IQS7222_REG_GRP_FILT] = { + .base = 0xAC00, + .num_row = 1, + .num_col = 2, + }, + [IQS7222_REG_GRP_SLDR] = { + .base = 0xB000, + .num_row = 2, + .num_col = 11, + }, + [IQS7222_REG_GRP_GPIO] = { + .base = 0xC000, + .num_row = 1, + .num_col = 3, + }, + [IQS7222_REG_GRP_SYS] = { + .base = IQS7222_SYS_SETUP, + .num_row = 1, + .num_col = 13, + }, + }, + }, + { + .prod_num = IQS7222_PROD_NUM_B, + .fw_major = 1, + .fw_minor = 27, + .reg_grps = { + [IQS7222_REG_GRP_STAT] = { + .base = IQS7222_SYS_STATUS, + .num_row = 1, + .num_col = 6, + }, + [IQS7222_REG_GRP_CYCLE] = { + .base = 0x8000, + .num_row = 10, + .num_col = 2, + }, + [IQS7222_REG_GRP_GLBL] = { + .base = 0x8A00, + .num_row = 1, + .num_col = 3, + }, + [IQS7222_REG_GRP_BTN] = { + .base = 0x9000, + .num_row = 20, + .num_col = 2, + }, + [IQS7222_REG_GRP_CHAN] = { + .base = 0xB000, + .num_row = 20, + .num_col = 4, + }, + [IQS7222_REG_GRP_FILT] = { + .base = 0xC400, + .num_row = 1, + .num_col = 2, + }, + [IQS7222_REG_GRP_SYS] = { + .base = IQS7222_SYS_SETUP, + .num_row = 1, + .num_col = 10, + }, + }, + }, + { + .prod_num = IQS7222_PROD_NUM_C, + .fw_major = 2, + .fw_minor = 23, + .sldr_res = U16_MAX, + .touch_link = 1686, + .wheel_enable = BIT(3), + .event_offset = 9, + .comms_offset = 10, + .reg_grps = { + [IQS7222_REG_GRP_STAT] = { + .base = IQS7222_SYS_STATUS, + .num_row = 1, + .num_col = 6, + }, + [IQS7222_REG_GRP_CYCLE] = { + .base = 0x8000, + .num_row = 5, + .num_col = 3, + }, + [IQS7222_REG_GRP_GLBL] = { + .base = 0x8500, + .num_row = 1, + .num_col = 3, + }, + [IQS7222_REG_GRP_BTN] = { + .base = 0x9000, + .num_row = 10, + .num_col = 3, + }, + [IQS7222_REG_GRP_CHAN] = { + .base = 0xA000, + .num_row = 10, + .num_col = 6, + }, + [IQS7222_REG_GRP_FILT] = { + .base = 0xAA00, + .num_row = 1, + .num_col = 2, + }, + [IQS7222_REG_GRP_SLDR] = { + .base = 0xB000, + .num_row = 2, + .num_col = 10, + }, + [IQS7222_REG_GRP_GPIO] = { + .base = 0xC000, + .num_row = 3, + .num_col = 3, + }, + [IQS7222_REG_GRP_SYS] = { + .base = IQS7222_SYS_SETUP, + .num_row = 1, + .num_col = 12, + }, + }, + }, + { + .prod_num = IQS7222_PROD_NUM_C, + .fw_major = 1, + .fw_minor = 13, + .sldr_res = U16_MAX, + .touch_link = 1674, + .wheel_enable = BIT(3), + .event_offset = 9, + .comms_offset = 10, + .reg_grps = { + [IQS7222_REG_GRP_STAT] = { + .base = IQS7222_SYS_STATUS, + .num_row = 1, + .num_col = 6, + }, + [IQS7222_REG_GRP_CYCLE] = { + .base = 0x8000, + .num_row = 5, + .num_col = 3, + }, + [IQS7222_REG_GRP_GLBL] = { + .base = 0x8500, + .num_row = 1, + .num_col = 3, + }, + [IQS7222_REG_GRP_BTN] = { + .base = 0x9000, + .num_row = 10, + .num_col = 3, + }, + [IQS7222_REG_GRP_CHAN] = { + .base = 0xA000, + .num_row = 10, + .num_col = 6, + }, + [IQS7222_REG_GRP_FILT] = { + .base = 0xAA00, + .num_row = 1, + .num_col = 2, + }, + [IQS7222_REG_GRP_SLDR] = { + .base = 0xB000, + .num_row = 2, + .num_col = 10, + }, + [IQS7222_REG_GRP_GPIO] = { + .base = 0xC000, + .num_row = 1, + .num_col = 3, + }, + [IQS7222_REG_GRP_SYS] = { + .base = IQS7222_SYS_SETUP, + .num_row = 1, + .num_col = 11, + }, + }, + }, +}; + +struct iqs7222_prop_desc { + const char *name; + enum iqs7222_reg_grp_id reg_grp; + enum iqs7222_reg_key_id reg_key; + int reg_offset; + int reg_shift; + int reg_width; + int val_pitch; + int val_min; + int val_max; + bool invert; + const char *label; +}; + +static const struct iqs7222_prop_desc iqs7222_props[] = { + { + .name = "azoteq,conv-period", + .reg_grp = IQS7222_REG_GRP_CYCLE, + .reg_offset = 0, + .reg_shift = 8, + .reg_width = 8, + .label = "conversion period", + }, + { + .name = "azoteq,conv-frac", + .reg_grp = IQS7222_REG_GRP_CYCLE, + .reg_offset = 0, + .reg_shift = 0, + .reg_width = 8, + .label = "conversion frequency fractional divider", + }, + { + .name = "azoteq,rx-float-inactive", + .reg_grp = IQS7222_REG_GRP_CYCLE, + .reg_offset = 1, + .reg_shift = 6, + .reg_width = 1, + .invert = true, + }, + { + .name = "azoteq,dead-time-enable", + .reg_grp = IQS7222_REG_GRP_CYCLE, + .reg_offset = 1, + .reg_shift = 5, + .reg_width = 1, + }, + { + .name = "azoteq,tx-freq-fosc", + .reg_grp = IQS7222_REG_GRP_CYCLE, + .reg_offset = 1, + .reg_shift = 4, + .reg_width = 1, + }, + { + .name = "azoteq,vbias-enable", + .reg_grp = IQS7222_REG_GRP_CYCLE, + .reg_offset = 1, + .reg_shift = 3, + .reg_width = 1, + }, + { + .name = "azoteq,sense-mode", + .reg_grp = IQS7222_REG_GRP_CYCLE, + .reg_offset = 1, + .reg_shift = 0, + .reg_width = 3, + .val_max = 3, + .label = "sensing mode", + }, + { + .name = "azoteq,iref-enable", + .reg_grp = IQS7222_REG_GRP_CYCLE, + .reg_offset = 2, + .reg_shift = 10, + .reg_width = 1, + }, + { + .name = "azoteq,iref-level", + .reg_grp = IQS7222_REG_GRP_CYCLE, + .reg_offset = 2, + .reg_shift = 4, + .reg_width = 4, + .label = "current reference level", + }, + { + .name = "azoteq,iref-trim", + .reg_grp = IQS7222_REG_GRP_CYCLE, + .reg_offset = 2, + .reg_shift = 0, + .reg_width = 4, + .label = "current reference trim", + }, + { + .name = "azoteq,rf-filt-enable", + .reg_grp = IQS7222_REG_GRP_GLBL, + .reg_offset = 0, + .reg_shift = 15, + .reg_width = 1, + }, + { + .name = "azoteq,max-counts", + .reg_grp = IQS7222_REG_GRP_GLBL, + .reg_offset = 0, + .reg_shift = 13, + .reg_width = 2, + .label = "maximum counts", + }, + { + .name = "azoteq,auto-mode", + .reg_grp = IQS7222_REG_GRP_GLBL, + .reg_offset = 0, + .reg_shift = 2, + .reg_width = 2, + .label = "number of conversions", + }, + { + .name = "azoteq,ati-frac-div-fine", + .reg_grp = IQS7222_REG_GRP_GLBL, + .reg_offset = 1, + .reg_shift = 9, + .reg_width = 5, + .label = "ATI fine fractional divider", + }, + { + .name = "azoteq,ati-frac-div-coarse", + .reg_grp = IQS7222_REG_GRP_GLBL, + .reg_offset = 1, + .reg_shift = 0, + .reg_width = 5, + .label = "ATI coarse fractional divider", + }, + { + .name = "azoteq,ati-comp-select", + .reg_grp = IQS7222_REG_GRP_GLBL, + .reg_offset = 2, + .reg_shift = 0, + .reg_width = 10, + .label = "ATI compensation selection", + }, + { + .name = "azoteq,ati-band", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 0, + .reg_shift = 12, + .reg_width = 2, + .label = "ATI band", + }, + { + .name = "azoteq,global-halt", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 0, + .reg_shift = 11, + .reg_width = 1, + }, + { + .name = "azoteq,invert-enable", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 0, + .reg_shift = 10, + .reg_width = 1, + }, + { + .name = "azoteq,dual-direction", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 0, + .reg_shift = 9, + .reg_width = 1, + }, + { + .name = "azoteq,samp-cap-double", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 0, + .reg_shift = 3, + .reg_width = 1, + }, + { + .name = "azoteq,vref-half", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 0, + .reg_shift = 2, + .reg_width = 1, + }, + { + .name = "azoteq,proj-bias", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 0, + .reg_shift = 0, + .reg_width = 2, + .label = "projected bias current", + }, + { + .name = "azoteq,ati-target", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 1, + .reg_shift = 8, + .reg_width = 8, + .val_pitch = 8, + .label = "ATI target", + }, + { + .name = "azoteq,ati-base", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 1, + .reg_shift = 3, + .reg_width = 5, + .val_pitch = 16, + .label = "ATI base", + }, + { + .name = "azoteq,ati-mode", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 1, + .reg_shift = 0, + .reg_width = 3, + .val_max = 5, + .label = "ATI mode", + }, + { + .name = "azoteq,ati-frac-div-fine", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 2, + .reg_shift = 9, + .reg_width = 5, + .label = "ATI fine fractional divider", + }, + { + .name = "azoteq,ati-frac-mult-coarse", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 2, + .reg_shift = 5, + .reg_width = 4, + .label = "ATI coarse fractional multiplier", + }, + { + .name = "azoteq,ati-frac-div-coarse", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 2, + .reg_shift = 0, + .reg_width = 5, + .label = "ATI coarse fractional divider", + }, + { + .name = "azoteq,ati-comp-div", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 3, + .reg_shift = 11, + .reg_width = 5, + .label = "ATI compensation divider", + }, + { + .name = "azoteq,ati-comp-select", + .reg_grp = IQS7222_REG_GRP_CHAN, + .reg_offset = 3, + .reg_shift = 0, + .reg_width = 10, + .label = "ATI compensation selection", + }, + { + .name = "azoteq,debounce-exit", + .reg_grp = IQS7222_REG_GRP_BTN, + .reg_key = IQS7222_REG_KEY_DEBOUNCE, + .reg_offset = 0, + .reg_shift = 12, + .reg_width = 4, + .label = "debounce exit factor", + }, + { + .name = "azoteq,debounce-enter", + .reg_grp = IQS7222_REG_GRP_BTN, + .reg_key = IQS7222_REG_KEY_DEBOUNCE, + .reg_offset = 0, + .reg_shift = 8, + .reg_width = 4, + .label = "debounce entrance factor", + }, + { + .name = "azoteq,thresh", + .reg_grp = IQS7222_REG_GRP_BTN, + .reg_key = IQS7222_REG_KEY_PROX, + .reg_offset = 0, + .reg_shift = 0, + .reg_width = 8, + .val_max = 127, + .label = "threshold", + }, + { + .name = "azoteq,thresh", + .reg_grp = IQS7222_REG_GRP_BTN, + .reg_key = IQS7222_REG_KEY_TOUCH, + .reg_offset = 1, + .reg_shift = 0, + .reg_width = 8, + .label = "threshold", + }, + { + .name = "azoteq,hyst", + .reg_grp = IQS7222_REG_GRP_BTN, + .reg_key = IQS7222_REG_KEY_TOUCH, + .reg_offset = 1, + .reg_shift = 8, + .reg_width = 8, + .label = "hysteresis", + }, + { + .name = "azoteq,lta-beta-lp", + .reg_grp = IQS7222_REG_GRP_FILT, + .reg_offset = 0, + .reg_shift = 12, + .reg_width = 4, + .label = "low-power mode long-term average beta", + }, + { + .name = "azoteq,lta-beta-np", + .reg_grp = IQS7222_REG_GRP_FILT, + .reg_offset = 0, + .reg_shift = 8, + .reg_width = 4, + .label = "normal-power mode long-term average beta", + }, + { + .name = "azoteq,counts-beta-lp", + .reg_grp = IQS7222_REG_GRP_FILT, + .reg_offset = 0, + .reg_shift = 4, + .reg_width = 4, + .label = "low-power mode counts beta", + }, + { + .name = "azoteq,counts-beta-np", + .reg_grp = IQS7222_REG_GRP_FILT, + .reg_offset = 0, + .reg_shift = 0, + .reg_width = 4, + .label = "normal-power mode counts beta", + }, + { + .name = "azoteq,lta-fast-beta-lp", + .reg_grp = IQS7222_REG_GRP_FILT, + .reg_offset = 1, + .reg_shift = 4, + .reg_width = 4, + .label = "low-power mode long-term average fast beta", + }, + { + .name = "azoteq,lta-fast-beta-np", + .reg_grp = IQS7222_REG_GRP_FILT, + .reg_offset = 1, + .reg_shift = 0, + .reg_width = 4, + .label = "normal-power mode long-term average fast beta", + }, + { + .name = "azoteq,lower-cal", + .reg_grp = IQS7222_REG_GRP_SLDR, + .reg_offset = 0, + .reg_shift = 8, + .reg_width = 8, + .label = "lower calibration", + }, + { + .name = "azoteq,static-beta", + .reg_grp = IQS7222_REG_GRP_SLDR, + .reg_key = IQS7222_REG_KEY_NO_WHEEL, + .reg_offset = 0, + .reg_shift = 6, + .reg_width = 1, + }, + { + .name = "azoteq,bottom-beta", + .reg_grp = IQS7222_REG_GRP_SLDR, + .reg_key = IQS7222_REG_KEY_NO_WHEEL, + .reg_offset = 0, + .reg_shift = 3, + .reg_width = 3, + .label = "bottom beta", + }, + { + .name = "azoteq,static-beta", + .reg_grp = IQS7222_REG_GRP_SLDR, + .reg_key = IQS7222_REG_KEY_WHEEL, + .reg_offset = 0, + .reg_shift = 7, + .reg_width = 1, + }, + { + .name = "azoteq,bottom-beta", + .reg_grp = IQS7222_REG_GRP_SLDR, + .reg_key = IQS7222_REG_KEY_WHEEL, + .reg_offset = 0, + .reg_shift = 4, + .reg_width = 3, + .label = "bottom beta", + }, + { + .name = "azoteq,bottom-speed", + .reg_grp = IQS7222_REG_GRP_SLDR, + .reg_offset = 1, + .reg_shift = 8, + .reg_width = 8, + .label = "bottom speed", + }, + { + .name = "azoteq,upper-cal", + .reg_grp = IQS7222_REG_GRP_SLDR, + .reg_offset = 1, + .reg_shift = 0, + .reg_width = 8, + .label = "upper calibration", + }, + { + .name = "azoteq,gesture-max-ms", + .reg_grp = IQS7222_REG_GRP_SLDR, + .reg_key = IQS7222_REG_KEY_TAP, + .reg_offset = 9, + .reg_shift = 8, + .reg_width = 8, + .val_pitch = 4, + .label = "maximum gesture time", + }, + { + .name = "azoteq,gesture-min-ms", + .reg_grp = IQS7222_REG_GRP_SLDR, + .reg_key = IQS7222_REG_KEY_TAP, + .reg_offset = 9, + .reg_shift = 3, + .reg_width = 5, + .val_pitch = 4, + .label = "minimum gesture time", + }, + { + .name = "azoteq,gesture-dist", + .reg_grp = IQS7222_REG_GRP_SLDR, + .reg_key = IQS7222_REG_KEY_AXIAL, + .reg_offset = 10, + .reg_shift = 8, + .reg_width = 8, + .val_pitch = 16, + .label = "gesture distance", + }, + { + .name = "azoteq,gesture-max-ms", + .reg_grp = IQS7222_REG_GRP_SLDR, + .reg_key = IQS7222_REG_KEY_AXIAL, + .reg_offset = 10, + .reg_shift = 0, + .reg_width = 8, + .val_pitch = 4, + .label = "maximum gesture time", + }, + { + .name = "drive-open-drain", + .reg_grp = IQS7222_REG_GRP_GPIO, + .reg_offset = 0, + .reg_shift = 1, + .reg_width = 1, + }, + { + .name = "azoteq,timeout-ati-ms", + .reg_grp = IQS7222_REG_GRP_SYS, + .reg_offset = 1, + .reg_shift = 0, + .reg_width = 16, + .val_pitch = 500, + .label = "ATI error timeout", + }, + { + .name = "azoteq,rate-ati-ms", + .reg_grp = IQS7222_REG_GRP_SYS, + .reg_offset = 2, + .reg_shift = 0, + .reg_width = 16, + .label = "ATI report rate", + }, + { + .name = "azoteq,timeout-np-ms", + .reg_grp = IQS7222_REG_GRP_SYS, + .reg_offset = 3, + .reg_shift = 0, + .reg_width = 16, + .label = "normal-power mode timeout", + }, + { + .name = "azoteq,rate-np-ms", + .reg_grp = IQS7222_REG_GRP_SYS, + .reg_offset = 4, + .reg_shift = 0, + .reg_width = 16, + .val_max = 3000, + .label = "normal-power mode report rate", + }, + { + .name = "azoteq,timeout-lp-ms", + .reg_grp = IQS7222_REG_GRP_SYS, + .reg_offset = 5, + .reg_shift = 0, + .reg_width = 16, + .label = "low-power mode timeout", + }, + { + .name = "azoteq,rate-lp-ms", + .reg_grp = IQS7222_REG_GRP_SYS, + .reg_offset = 6, + .reg_shift = 0, + .reg_width = 16, + .val_max = 3000, + .label = "low-power mode report rate", + }, + { + .name = "azoteq,timeout-ulp-ms", + .reg_grp = IQS7222_REG_GRP_SYS, + .reg_offset = 7, + .reg_shift = 0, + .reg_width = 16, + .label = "ultra-low-power mode timeout", + }, + { + .name = "azoteq,rate-ulp-ms", + .reg_grp = IQS7222_REG_GRP_SYS, + .reg_offset = 8, + .reg_shift = 0, + .reg_width = 16, + .val_max = 3000, + .label = "ultra-low-power mode report rate", + }, +}; + +struct iqs7222_private { + const struct iqs7222_dev_desc *dev_desc; + struct gpio_desc *reset_gpio; + struct gpio_desc *irq_gpio; + struct i2c_client *client; + struct input_dev *keypad; + unsigned int kp_type[IQS7222_MAX_CHAN][ARRAY_SIZE(iqs7222_kp_events)]; + unsigned int kp_code[IQS7222_MAX_CHAN][ARRAY_SIZE(iqs7222_kp_events)]; + unsigned int sl_code[IQS7222_MAX_SLDR][ARRAY_SIZE(iqs7222_sl_events)]; + unsigned int sl_axis[IQS7222_MAX_SLDR]; + u16 cycle_setup[IQS7222_MAX_CHAN / 2][IQS7222_MAX_COLS_CYCLE]; + u16 glbl_setup[IQS7222_MAX_COLS_GLBL]; + u16 btn_setup[IQS7222_MAX_CHAN][IQS7222_MAX_COLS_BTN]; + u16 chan_setup[IQS7222_MAX_CHAN][IQS7222_MAX_COLS_CHAN]; + u16 filt_setup[IQS7222_MAX_COLS_FILT]; + u16 sldr_setup[IQS7222_MAX_SLDR][IQS7222_MAX_COLS_SLDR]; + u16 gpio_setup[ARRAY_SIZE(iqs7222_gpio_links)][IQS7222_MAX_COLS_GPIO]; + u16 sys_setup[IQS7222_MAX_COLS_SYS]; +}; + +static u16 *iqs7222_setup(struct iqs7222_private *iqs7222, + enum iqs7222_reg_grp_id reg_grp, int row) +{ + switch (reg_grp) { + case IQS7222_REG_GRP_CYCLE: + return iqs7222->cycle_setup[row]; + + case IQS7222_REG_GRP_GLBL: + return iqs7222->glbl_setup; + + case IQS7222_REG_GRP_BTN: + return iqs7222->btn_setup[row]; + + case IQS7222_REG_GRP_CHAN: + return iqs7222->chan_setup[row]; + + case IQS7222_REG_GRP_FILT: + return iqs7222->filt_setup; + + case IQS7222_REG_GRP_SLDR: + return iqs7222->sldr_setup[row]; + + case IQS7222_REG_GRP_GPIO: + return iqs7222->gpio_setup[row]; + + case IQS7222_REG_GRP_SYS: + return iqs7222->sys_setup; + + default: + return NULL; + } +} + +static int iqs7222_irq_poll(struct iqs7222_private *iqs7222) +{ + ktime_t irq_timeout = ktime_add_ms(ktime_get(), IQS7222_IRQ_TIMEOUT_MS); + int ret; + + do { + usleep_range(1000, 1100); + + ret = gpiod_get_value_cansleep(iqs7222->irq_gpio); + if (ret < 0) + return ret; + else if (ret > 0) + return 0; + } while (ktime_compare(ktime_get(), irq_timeout) < 0); + + return -EBUSY; +} + +static int iqs7222_hard_reset(struct iqs7222_private *iqs7222) +{ + if (!iqs7222->reset_gpio) + return 0; + + gpiod_set_value_cansleep(iqs7222->reset_gpio, 1); + usleep_range(1000, 1100); + + gpiod_set_value_cansleep(iqs7222->reset_gpio, 0); + + return iqs7222_irq_poll(iqs7222); +} + +static int iqs7222_force_comms(struct iqs7222_private *iqs7222) +{ + u8 mbuf[] = { 0xFF, 0x00, }; + int ret; + + /* + * The device cannot communicate until it asserts its interrupt (RDY) + * pin. Attempts to do so while RDY is deasserted return an ACK; how- + * ever all write data is ignored, and all read data returns 0xEE. + * + * Unsolicited communication must be preceded by a special force com- + * munication command, after which the device eventually asserts its + * RDY pin and agrees to communicate. + * + * Regardless of whether communication is forced or the result of an + * interrupt, the device automatically deasserts its RDY pin once it + * detects an I2C stop condition, or a timeout expires. + */ + ret = gpiod_get_value_cansleep(iqs7222->irq_gpio); + if (ret < 0) + return ret; + else if (ret > 0) + return 0; + + ret = i2c_master_send(iqs7222->client, mbuf, sizeof(mbuf)); + if (ret < 0) + return ret; + else if (ret < sizeof(mbuf)) + return -EIO; + + return iqs7222_irq_poll(iqs7222); +} + +static int iqs7222_read_burst(struct iqs7222_private *iqs7222, + u16 reg, void *val, u16 len) +{ + u8 reg_buf[sizeof(__be16)]; + int ret, i; + struct i2c_client *client = iqs7222->client; + struct i2c_msg msg[] = { + { + .addr = client->addr, + .flags = 0, + .buf = reg_buf, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = len, + .buf = (u8 *)val, + }, + }; + + if (len % sizeof(__le16)) + return -EINVAL; + + if (reg > U8_MAX) { + put_unaligned_be16(reg, reg_buf); + msg[0].len = sizeof(reg_buf); + } else { + *reg_buf = (u8)reg; + msg[0].len = sizeof(u8); + } + + /* + * The following loop protects against an edge case in which the RDY + * pin is automatically deasserted just as the read is initiated. In + * that case, the read must be retried using forced communication. + */ + for (i = 0; i < IQS7222_NUM_RETRIES; i++) { + ret = iqs7222_force_comms(iqs7222); + if (ret < 0) + continue; + + ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); + if (ret < 0) + return ret; + else if (ret < ARRAY_SIZE(msg)) + return -EIO; + + /* + * The following delay allows the device to deassert the RDY + * pin after receiving an I2C stop condition. + */ + usleep_range(50, 100); + + if (get_unaligned_le16(msg[1].buf) != IQS7222_COMMS_ERROR) + return 0; + + ret = -ENODATA; + } + + return ret; +} + +static int iqs7222_read_word(struct iqs7222_private *iqs7222, u16 reg, u16 *val) +{ + __le16 val_buf; + int error; + + error = iqs7222_read_burst(iqs7222, reg, &val_buf, sizeof(val_buf)); + if (error) + return error; + + *val = le16_to_cpu(val_buf); + + return 0; +} + +static int iqs7222_write_burst(struct iqs7222_private *iqs7222, + u16 reg, const void *val, u16 len) +{ + u8 mbuf[sizeof(reg) + IQS7222_MAX_COLS_ALL * sizeof(__le16)]; + int mlen, ret, i; + + if (len % sizeof(__le16)) + return -EINVAL; + + if (reg > U8_MAX) { + put_unaligned_be16(reg, mbuf); + mlen = sizeof(reg); + } else { + *mbuf = (u8)reg; + mlen = sizeof(u8); + } + + if (mlen + len > sizeof(mbuf)) + return -ENOMEM; + + memcpy(mbuf + mlen, val, len); + mlen += len; + + /* + * The following loop protects against an edge case in which the RDY + * pin is automatically asserted just before the force communication + * command is sent. + * + * In that case, the subsequent I2C stop condition tricks the device + * into preemptively deasserting the RDY pin and the command must be + * sent again. + */ + for (i = 0; i < IQS7222_NUM_RETRIES; i++) { + ret = iqs7222_force_comms(iqs7222); + if (ret < 0) + continue; + + ret = i2c_master_send(iqs7222->client, mbuf, mlen); + if (ret < 0) + return ret; + else if (ret < mlen) + return -EIO; + + usleep_range(50, 100); + + return 0; + } + + return ret; +} + +static int iqs7222_write_word(struct iqs7222_private *iqs7222, u16 reg, u16 val) +{ + __le16 val_buf = cpu_to_le16(val); + + return iqs7222_write_burst(iqs7222, reg, &val_buf, sizeof(val_buf)); +} + +static int iqs7222_dev_init(struct iqs7222_private *iqs7222, int dir) +{ + const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc; + struct i2c_client *client = iqs7222->client; + int comms_offset = dev_desc->comms_offset; + int error, i, j, k; + + /* + * Take advantage of the stop-bit disable function, if available, to + * save the trouble of having to reopen a communication window after + * each burst read or write. + */ + if (comms_offset) { + u16 comms_setup; + + error = iqs7222_read_word(iqs7222, + IQS7222_SYS_SETUP + comms_offset, + &comms_setup); + if (error) + return error; + + error = iqs7222_write_word(iqs7222, + IQS7222_SYS_SETUP + comms_offset, + comms_setup | IQS7222_COMMS_HOLD); + if (error) + return error; + } + + for (i = 0; i < IQS7222_NUM_REG_GRPS; i++) { + int num_row = dev_desc->reg_grps[i].num_row; + int num_col = dev_desc->reg_grps[i].num_col; + u16 reg = dev_desc->reg_grps[i].base; + int len = num_col * sizeof(__le16); + __le16 *val_buf; + u16 *val; + + if (!len) + continue; + + val = iqs7222_setup(iqs7222, i, 0); + if (!val) + continue; + + val_buf = kcalloc(num_col, sizeof(__le16), GFP_KERNEL); + if (!val_buf) + return -ENOMEM; + + for (j = 0; j < num_row; j++) { + switch (dir) { + case READ: + error = iqs7222_read_burst(iqs7222, reg, + val_buf, len); + for (k = 0; k < num_col; k++) + val[k] = le16_to_cpu(val_buf[k]); + break; + + case WRITE: + for (k = 0; k < num_col; k++) + val_buf[k] = cpu_to_le16(val[k]); + error = iqs7222_write_burst(iqs7222, reg, + val_buf, len); + break; + + default: + error = -EINVAL; + } + + if (error) + break; + + reg += IQS7222_REG_OFFSET; + val += iqs7222_max_cols[i]; + } + + kfree(val_buf); + + if (error) + return error; + } + + if (comms_offset) { + u16 comms_setup; + + error = iqs7222_read_word(iqs7222, + IQS7222_SYS_SETUP + comms_offset, + &comms_setup); + if (error) + return error; + + error = iqs7222_write_word(iqs7222, + IQS7222_SYS_SETUP + comms_offset, + comms_setup & ~IQS7222_COMMS_HOLD); + if (error) + return error; + } + + if (dir == READ) + return 0; + + for (i = 0; i < IQS7222_NUM_RETRIES; i++) { + u16 sys_setup = iqs7222->sys_setup[0] + & ~IQS7222_SYS_SETUP_ACK_RESET; + u16 sys_status = 0; + ktime_t ati_timeout; + + /* + * Trigger ATI from streaming and normal-power modes so that + * the RDY pin continues to be asserted during ATI. + */ + error = iqs7222_write_word(iqs7222, IQS7222_SYS_SETUP, + sys_setup | + IQS7222_SYS_SETUP_REDO_ATI); + if (error) + return error; + + ati_timeout = ktime_add_ms(ktime_get(), IQS7222_ATI_TIMEOUT_MS); + + do { + error = iqs7222_irq_poll(iqs7222); + if (error) + continue; + + error = iqs7222_read_word(iqs7222, IQS7222_SYS_STATUS, + &sys_status); + if (error) + return error; + + if (sys_status & IQS7222_SYS_STATUS_ATI_ACTIVE) + continue; + + if (sys_status & IQS7222_SYS_STATUS_ATI_ERROR) + break; + + /* + * Use stream-in-touch mode if either slider reports + * absolute position. + */ + sys_setup |= test_bit(EV_ABS, iqs7222->keypad->evbit) + ? IQS7222_SYS_SETUP_INTF_MODE_TOUCH + : IQS7222_SYS_SETUP_INTF_MODE_EVENT; + sys_setup |= IQS7222_SYS_SETUP_PWR_MODE_AUTO; + + return iqs7222_write_word(iqs7222, IQS7222_SYS_SETUP, + sys_setup); + } while (ktime_compare(ktime_get(), ati_timeout) < 0); + + dev_err(&client->dev, + "ATI attempt %d of %d failed with status 0x%02x, %s\n", + i + 1, IQS7222_NUM_RETRIES, (u8)sys_status, + i < IQS7222_NUM_RETRIES ? "retrying..." : "stopping"); + } + + return -ETIMEDOUT; +} + +static int iqs7222_dev_info(struct iqs7222_private *iqs7222) +{ + struct i2c_client *client = iqs7222->client; + unsigned int fw_ver = 0; + __le16 mbuf[3]; + int error, i; + + error = iqs7222_read_burst(iqs7222, IQS7222_PROD_NUM, mbuf, + sizeof(mbuf)); + if (error) + return error; + + for (i = 0; i < ARRAY_SIZE(iqs7222_devs); i++) { + unsigned int fw_ver_min = (iqs7222_devs[i].fw_major << 16) + + iqs7222_devs[i].fw_minor; + + if (le16_to_cpu(mbuf[0]) != iqs7222_devs[i].prod_num) + continue; + + fw_ver = (le16_to_cpu(mbuf[1]) << 16) + le16_to_cpu(mbuf[2]); + if (fw_ver < fw_ver_min) + continue; + + iqs7222->dev_desc = &iqs7222_devs[i]; + + return 0; + } + + if (fw_ver) + dev_err(&client->dev, "Unsupported firmware revision: %u.%u\n", + le16_to_cpu(mbuf[1]), le16_to_cpu(mbuf[2])); + else + dev_err(&client->dev, "Unrecognized product number: %u\n", + le16_to_cpu(mbuf[0])); + + return -EINVAL; +} + +static int iqs7222_gpio_select(struct iqs7222_private *iqs7222, + struct fwnode_handle *child_node, + int child_enable, u16 child_link) +{ + const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc; + struct i2c_client *client = iqs7222->client; + int num_gpio = dev_desc->reg_grps[IQS7222_REG_GRP_GPIO].num_row; + int error, count, i; + unsigned int gpio_sel[ARRAY_SIZE(iqs7222_gpio_links)]; + + if (!num_gpio) + return 0; + + if (!fwnode_property_present(child_node, "azoteq,gpio-select")) + return 0; + + count = fwnode_property_count_u32(child_node, "azoteq,gpio-select"); + if (count > num_gpio) { + dev_err(&client->dev, "Invalid number of %s GPIOs\n", + fwnode_get_name(child_node)); + return -EINVAL; + } else if (count < 0) { + dev_err(&client->dev, "Failed to count %s GPIOs: %d\n", + fwnode_get_name(child_node), count); + return count; + } + + error = fwnode_property_read_u32_array(child_node, + "azoteq,gpio-select", + gpio_sel, count); + if (error) { + dev_err(&client->dev, "Failed to read %s GPIOs: %d\n", + fwnode_get_name(child_node), error); + return error; + } + + for (i = 0; i < count; i++) { + u16 *gpio_setup; + + if (gpio_sel[i] >= num_gpio) { + dev_err(&client->dev, "Invalid %s GPIO: %u\n", + fwnode_get_name(child_node), gpio_sel[i]); + return -EINVAL; + } + + gpio_setup = iqs7222->gpio_setup[gpio_sel[i]]; + + if (gpio_setup[2] && child_link != gpio_setup[2]) { + dev_err(&client->dev, + "Conflicting GPIO %u event types\n", + gpio_sel[i]); + return -EINVAL; + } + + gpio_setup[0] |= IQS7222_GPIO_SETUP_0_GPIO_EN; + gpio_setup[1] |= child_enable; + gpio_setup[2] = child_link; + } + + return 0; +} + +static int iqs7222_parse_props(struct iqs7222_private *iqs7222, + struct fwnode_handle **child_node, + int child_index, + enum iqs7222_reg_grp_id reg_grp, + enum iqs7222_reg_key_id reg_key) +{ + u16 *setup = iqs7222_setup(iqs7222, reg_grp, child_index); + struct fwnode_handle *reg_grp_node = *child_node; + struct i2c_client *client = iqs7222->client; + char reg_grp_name[16]; + int i; + + switch (reg_grp) { + case IQS7222_REG_GRP_CYCLE: + case IQS7222_REG_GRP_CHAN: + case IQS7222_REG_GRP_SLDR: + case IQS7222_REG_GRP_GPIO: + case IQS7222_REG_GRP_BTN: + /* + * These groups derive a child node and return it to the caller + * for additional group-specific processing. In some cases, the + * child node may have already been derived. + */ + if (*child_node) + break; + + snprintf(reg_grp_name, sizeof(reg_grp_name), "%s-%d", + iqs7222_reg_grp_names[reg_grp], child_index); + + reg_grp_node = device_get_named_child_node(&client->dev, + reg_grp_name); + if (!reg_grp_node) + return 0; + + *child_node = reg_grp_node; + break; + + case IQS7222_REG_GRP_GLBL: + case IQS7222_REG_GRP_FILT: + case IQS7222_REG_GRP_SYS: + /* + * These groups are not organized beneath a child node, nor are + * they subject to any additional processing by the caller. + */ + reg_grp_node = dev_fwnode(&client->dev); + break; + + default: + return -EINVAL; + } + + for (i = 0; i < ARRAY_SIZE(iqs7222_props); i++) { + const char *name = iqs7222_props[i].name; + int reg_offset = iqs7222_props[i].reg_offset; + int reg_shift = iqs7222_props[i].reg_shift; + int reg_width = iqs7222_props[i].reg_width; + int val_pitch = iqs7222_props[i].val_pitch ? : 1; + int val_min = iqs7222_props[i].val_min; + int val_max = iqs7222_props[i].val_max; + bool invert = iqs7222_props[i].invert; + const char *label = iqs7222_props[i].label ? : name; + unsigned int val; + int error; + + if (iqs7222_props[i].reg_grp != reg_grp || + iqs7222_props[i].reg_key != reg_key) + continue; + + /* + * Boolean register fields are one bit wide; they are forcibly + * reset to provide a means to undo changes by a bootloader if + * necessary. + * + * Scalar fields, on the other hand, are left untouched unless + * their corresponding properties are present. + */ + if (reg_width == 1) { + if (invert) + setup[reg_offset] |= BIT(reg_shift); + else + setup[reg_offset] &= ~BIT(reg_shift); + } + + if (!fwnode_property_present(reg_grp_node, name)) + continue; + + if (reg_width == 1) { + if (invert) + setup[reg_offset] &= ~BIT(reg_shift); + else + setup[reg_offset] |= BIT(reg_shift); + + continue; + } + + error = fwnode_property_read_u32(reg_grp_node, name, &val); + if (error) { + dev_err(&client->dev, "Failed to read %s %s: %d\n", + fwnode_get_name(reg_grp_node), label, error); + return error; + } + + if (!val_max) + val_max = GENMASK(reg_width - 1, 0) * val_pitch; + + if (val < val_min || val > val_max) { + dev_err(&client->dev, "Invalid %s %s: %u\n", + fwnode_get_name(reg_grp_node), label, val); + return -EINVAL; + } + + setup[reg_offset] &= ~GENMASK(reg_shift + reg_width - 1, + reg_shift); + setup[reg_offset] |= (val / val_pitch << reg_shift); + } + + return 0; +} + +static int iqs7222_parse_cycle(struct iqs7222_private *iqs7222, int cycle_index) +{ + u16 *cycle_setup = iqs7222->cycle_setup[cycle_index]; + struct i2c_client *client = iqs7222->client; + struct fwnode_handle *cycle_node = NULL; + unsigned int pins[9]; + int error, count, i; + + /* + * Each channel shares a cycle with one other channel; the mapping of + * channels to cycles is fixed. Properties defined for a cycle impact + * both channels tied to the cycle. + */ + error = iqs7222_parse_props(iqs7222, &cycle_node, cycle_index, + IQS7222_REG_GRP_CYCLE, + IQS7222_REG_KEY_NONE); + if (error) + return error; + + if (!cycle_node) + return 0; + + /* + * Unlike channels which are restricted to a select range of CRx pins + * based on channel number, any cycle can claim any of the device's 9 + * CTx pins (CTx0-8). + */ + if (!fwnode_property_present(cycle_node, "azoteq,tx-enable")) + return 0; + + count = fwnode_property_count_u32(cycle_node, "azoteq,tx-enable"); + if (count > ARRAY_SIZE(pins)) { + dev_err(&client->dev, "Invalid number of %s CTx pins\n", + fwnode_get_name(cycle_node)); + return -EINVAL; + } else if (count < 0) { + dev_err(&client->dev, "Failed to count %s CTx pins: %d\n", + fwnode_get_name(cycle_node), count); + return count; + } + + error = fwnode_property_read_u32_array(cycle_node, "azoteq,tx-enable", + pins, count); + if (error) { + dev_err(&client->dev, "Failed to read %s CTx pins: %d\n", + fwnode_get_name(cycle_node), error); + return error; + } + + cycle_setup[1] &= ~GENMASK(7 + ARRAY_SIZE(pins) - 1, 7); + + for (i = 0; i < count; i++) { + if (pins[i] > 8) { + dev_err(&client->dev, "Invalid %s CTx pin: %u\n", + fwnode_get_name(cycle_node), pins[i]); + return -EINVAL; + } + + cycle_setup[1] |= BIT(pins[i] + 7); + } + + return 0; +} + +static int iqs7222_parse_chan(struct iqs7222_private *iqs7222, int chan_index) +{ + const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc; + struct i2c_client *client = iqs7222->client; + struct fwnode_handle *chan_node = NULL; + int num_chan = dev_desc->reg_grps[IQS7222_REG_GRP_CHAN].num_row; + int ext_chan = rounddown(num_chan, 10); + int error, i; + u16 *chan_setup = iqs7222->chan_setup[chan_index]; + u16 *sys_setup = iqs7222->sys_setup; + unsigned int val; + + error = iqs7222_parse_props(iqs7222, &chan_node, chan_index, + IQS7222_REG_GRP_CHAN, + IQS7222_REG_KEY_NONE); + if (error) + return error; + + if (!chan_node) + return 0; + + if (dev_desc->allow_offset) { + sys_setup[dev_desc->allow_offset] |= BIT(chan_index); + if (fwnode_property_present(chan_node, "azoteq,ulp-allow")) + sys_setup[dev_desc->allow_offset] &= ~BIT(chan_index); + } + + chan_setup[0] |= IQS7222_CHAN_SETUP_0_CHAN_EN; + + /* + * The reference channel function allows for differential measurements + * and is only available in the case of IQS7222A or IQS7222C. + */ + if (dev_desc->reg_grps[IQS7222_REG_GRP_CHAN].num_col > 4 && + fwnode_property_present(chan_node, "azoteq,ref-select")) { + u16 *ref_setup; + + error = fwnode_property_read_u32(chan_node, "azoteq,ref-select", + &val); + if (error) { + dev_err(&client->dev, + "Failed to read %s reference channel: %d\n", + fwnode_get_name(chan_node), error); + return error; + } + + if (val >= ext_chan) { + dev_err(&client->dev, + "Invalid %s reference channel: %u\n", + fwnode_get_name(chan_node), val); + return -EINVAL; + } + + ref_setup = iqs7222->chan_setup[val]; + + /* + * Configure the current channel as a follower of the selected + * reference channel. + */ + chan_setup[0] |= IQS7222_CHAN_SETUP_0_REF_MODE_FOLLOW; + chan_setup[4] = val * 42 + 1048; + + if (!fwnode_property_read_u32(chan_node, "azoteq,ref-weight", + &val)) { + if (val > U16_MAX) { + dev_err(&client->dev, + "Invalid %s reference weight: %u\n", + fwnode_get_name(chan_node), val); + return -EINVAL; + } + + chan_setup[5] = val; + } + + /* + * Configure the selected channel as a reference channel which + * serves the current channel. + */ + ref_setup[0] |= IQS7222_CHAN_SETUP_0_REF_MODE_REF; + ref_setup[5] |= BIT(chan_index); + + ref_setup[4] = dev_desc->touch_link; + if (fwnode_property_present(chan_node, "azoteq,use-prox")) + ref_setup[4] -= 2; + } + + if (fwnode_property_present(chan_node, "azoteq,rx-enable")) { + /* + * Each channel can claim up to 4 CRx pins. The first half of + * the channels can use CRx0-3, while the second half can use + * CRx4-7. + */ + unsigned int pins[4]; + int count; + + count = fwnode_property_count_u32(chan_node, + "azoteq,rx-enable"); + if (count > ARRAY_SIZE(pins)) { + dev_err(&client->dev, + "Invalid number of %s CRx pins\n", + fwnode_get_name(chan_node)); + return -EINVAL; + } else if (count < 0) { + dev_err(&client->dev, + "Failed to count %s CRx pins: %d\n", + fwnode_get_name(chan_node), count); + return count; + } + + error = fwnode_property_read_u32_array(chan_node, + "azoteq,rx-enable", + pins, count); + if (error) { + dev_err(&client->dev, + "Failed to read %s CRx pins: %d\n", + fwnode_get_name(chan_node), error); + return error; + } + + chan_setup[0] &= ~GENMASK(4 + ARRAY_SIZE(pins) - 1, 4); + + for (i = 0; i < count; i++) { + int min_crx = chan_index < ext_chan / 2 ? 0 : 4; + + if (pins[i] < min_crx || pins[i] > min_crx + 3) { + dev_err(&client->dev, + "Invalid %s CRx pin: %u\n", + fwnode_get_name(chan_node), pins[i]); + return -EINVAL; + } + + chan_setup[0] |= BIT(pins[i] + 4 - min_crx); + } + } + + for (i = 0; i < ARRAY_SIZE(iqs7222_kp_events); i++) { + const char *event_name = iqs7222_kp_events[i].name; + u16 event_enable = iqs7222_kp_events[i].enable; + struct fwnode_handle *event_node; + + event_node = fwnode_get_named_child_node(chan_node, event_name); + if (!event_node) + continue; + + error = iqs7222_parse_props(iqs7222, &event_node, chan_index, + IQS7222_REG_GRP_BTN, + iqs7222_kp_events[i].reg_key); + if (error) + return error; + + error = iqs7222_gpio_select(iqs7222, event_node, + BIT(chan_index), + dev_desc->touch_link - (i ? 0 : 2)); + if (error) + return error; + + if (!fwnode_property_read_u32(event_node, + "azoteq,timeout-press-ms", + &val)) { + /* + * The IQS7222B employs a global pair of press timeout + * registers as opposed to channel-specific registers. + */ + u16 *setup = dev_desc->reg_grps + [IQS7222_REG_GRP_BTN].num_col > 2 ? + &iqs7222->btn_setup[chan_index][2] : + &sys_setup[9]; + + if (val > U8_MAX * 500) { + dev_err(&client->dev, + "Invalid %s press timeout: %u\n", + fwnode_get_name(chan_node), val); + return -EINVAL; + } + + *setup &= ~(U8_MAX << i * 8); + *setup |= (val / 500 << i * 8); + } + + error = fwnode_property_read_u32(event_node, "linux,code", + &val); + if (error) { + dev_err(&client->dev, "Failed to read %s code: %d\n", + fwnode_get_name(chan_node), error); + return error; + } + + iqs7222->kp_code[chan_index][i] = val; + iqs7222->kp_type[chan_index][i] = EV_KEY; + + if (fwnode_property_present(event_node, "linux,input-type")) { + error = fwnode_property_read_u32(event_node, + "linux,input-type", + &val); + if (error) { + dev_err(&client->dev, + "Failed to read %s input type: %d\n", + fwnode_get_name(chan_node), error); + return error; + } + + if (val != EV_KEY && val != EV_SW) { + dev_err(&client->dev, + "Invalid %s input type: %u\n", + fwnode_get_name(chan_node), val); + return -EINVAL; + } + + iqs7222->kp_type[chan_index][i] = val; + } + + /* + * Reference channels can opt out of event reporting by using + * KEY_RESERVED in place of a true key or switch code. + */ + if (iqs7222->kp_type[chan_index][i] == EV_KEY && + iqs7222->kp_code[chan_index][i] == KEY_RESERVED) + continue; + + input_set_capability(iqs7222->keypad, + iqs7222->kp_type[chan_index][i], + iqs7222->kp_code[chan_index][i]); + + if (!dev_desc->event_offset) + continue; + + sys_setup[dev_desc->event_offset] |= event_enable; + } + + /* + * The following call handles a special pair of properties that apply + * to a channel node, but reside within the button (event) group. + */ + return iqs7222_parse_props(iqs7222, &chan_node, chan_index, + IQS7222_REG_GRP_BTN, + IQS7222_REG_KEY_DEBOUNCE); +} + +static int iqs7222_parse_sldr(struct iqs7222_private *iqs7222, int sldr_index) +{ + const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc; + struct i2c_client *client = iqs7222->client; + struct fwnode_handle *sldr_node = NULL; + int num_chan = dev_desc->reg_grps[IQS7222_REG_GRP_CHAN].num_row; + int ext_chan = rounddown(num_chan, 10); + int count, error, reg_offset, i; + u16 *sldr_setup = iqs7222->sldr_setup[sldr_index]; + u16 *sys_setup = iqs7222->sys_setup; + unsigned int chan_sel[4], val; + + error = iqs7222_parse_props(iqs7222, &sldr_node, sldr_index, + IQS7222_REG_GRP_SLDR, + IQS7222_REG_KEY_NONE); + if (error) + return error; + + if (!sldr_node) + return 0; + + /* + * Each slider can be spread across 3 to 4 channels. It is possible to + * select only 2 channels, but doing so prevents the slider from using + * the specified resolution. + */ + count = fwnode_property_count_u32(sldr_node, "azoteq,channel-select"); + if (count < 3 || count > ARRAY_SIZE(chan_sel)) { + dev_err(&client->dev, "Invalid number of %s channels\n", + fwnode_get_name(sldr_node)); + return -EINVAL; + } else if (count < 0) { + dev_err(&client->dev, "Failed to count %s channels: %d\n", + fwnode_get_name(sldr_node), count); + return count; + } + + error = fwnode_property_read_u32_array(sldr_node, + "azoteq,channel-select", + chan_sel, count); + if (error) { + dev_err(&client->dev, "Failed to read %s channels: %d\n", + fwnode_get_name(sldr_node), error); + return error; + } + + /* + * Resolution and top speed, if small enough, are packed into a single + * register. Otherwise, each occupies its own register and the rest of + * the slider-related register addresses are offset by one. + */ + reg_offset = dev_desc->sldr_res < U16_MAX ? 0 : 1; + + sldr_setup[0] |= count; + sldr_setup[3 + reg_offset] &= ~IQS7222_SLDR_SETUP_3_CHAN_SEL_MASK; + + for (i = 0; i < ARRAY_SIZE(chan_sel); i++) { + sldr_setup[5 + reg_offset + i] = 0; + if (i >= count) + continue; + + if (chan_sel[i] >= ext_chan) { + dev_err(&client->dev, "Invalid %s channel: %u\n", + fwnode_get_name(sldr_node), chan_sel[i]); + return -EINVAL; + } + + /* + * The following fields indicate which channels participate in + * the slider, as well as each channel's relative placement. + */ + sldr_setup[3 + reg_offset] |= BIT(chan_sel[i]); + sldr_setup[5 + reg_offset + i] = chan_sel[i] * 42 + 1080; + } + + sldr_setup[4 + reg_offset] = dev_desc->touch_link; + if (fwnode_property_present(sldr_node, "azoteq,use-prox")) + sldr_setup[4 + reg_offset] -= 2; + + if (!fwnode_property_read_u32(sldr_node, "azoteq,slider-size", &val)) { + if (!val || val > dev_desc->sldr_res) { + dev_err(&client->dev, "Invalid %s size: %u\n", + fwnode_get_name(sldr_node), val); + return -EINVAL; + } + + if (reg_offset) { + sldr_setup[3] = val; + } else { + sldr_setup[2] &= ~IQS7222_SLDR_SETUP_2_RES_MASK; + sldr_setup[2] |= (val / 16 << + IQS7222_SLDR_SETUP_2_RES_SHIFT); + } + } + + if (!fwnode_property_read_u32(sldr_node, "azoteq,top-speed", &val)) { + if (val > (reg_offset ? U16_MAX : U8_MAX * 4)) { + dev_err(&client->dev, "Invalid %s top speed: %u\n", + fwnode_get_name(sldr_node), val); + return -EINVAL; + } + + if (reg_offset) { + sldr_setup[2] = val; + } else { + sldr_setup[2] &= ~IQS7222_SLDR_SETUP_2_TOP_SPEED_MASK; + sldr_setup[2] |= (val / 4); + } + } + + if (!fwnode_property_read_u32(sldr_node, "linux,axis", &val)) { + u16 sldr_max = sldr_setup[3] - 1; + + if (!reg_offset) { + sldr_max = sldr_setup[2]; + + sldr_max &= IQS7222_SLDR_SETUP_2_RES_MASK; + sldr_max >>= IQS7222_SLDR_SETUP_2_RES_SHIFT; + + sldr_max = sldr_max * 16 - 1; + } + + input_set_abs_params(iqs7222->keypad, val, 0, sldr_max, 0, 0); + iqs7222->sl_axis[sldr_index] = val; + } + + if (dev_desc->wheel_enable) { + sldr_setup[0] &= ~dev_desc->wheel_enable; + if (iqs7222->sl_axis[sldr_index] == ABS_WHEEL) + sldr_setup[0] |= dev_desc->wheel_enable; + } + + for (i = 0; i < ARRAY_SIZE(iqs7222_sl_events); i++) { + const char *event_name = iqs7222_sl_events[i].name; + struct fwnode_handle *event_node; + + /* + * The absence of a register offset means the remaining fields + * in the group represent gesture settings. + */ + if (iqs7222_sl_events[i].enable && !reg_offset) + sldr_setup[9] &= ~iqs7222_sl_events[i].enable; + + event_node = fwnode_get_named_child_node(sldr_node, event_name); + if (!event_node) + continue; + + error = iqs7222_parse_props(iqs7222, &event_node, sldr_index, + IQS7222_REG_GRP_SLDR, + reg_offset ? + IQS7222_REG_KEY_RESERVED : + iqs7222_sl_events[i].reg_key); + if (error) + return error; + + error = fwnode_property_read_u32(event_node, "linux,code", + &val); + if (error) { + dev_err(&client->dev, "Failed to read %s code: %d\n", + fwnode_get_name(sldr_node), error); + return error; + } + + iqs7222->sl_code[sldr_index][i] = val; + input_set_capability(iqs7222->keypad, EV_KEY, val); + + /* + * The press/release event is determined based on whether the + * coordinate field reports 0xFFFF and has no explicit enable + * control. + */ + if (!iqs7222_sl_events[i].enable || reg_offset) + continue; + + sldr_setup[9] |= iqs7222_sl_events[i].enable; + + error = iqs7222_gpio_select(iqs7222, event_node, + iqs7222_sl_events[i].enable, + 1568 + sldr_index * 30); + if (error) + return error; + + if (!dev_desc->event_offset) + continue; + + sys_setup[dev_desc->event_offset] |= BIT(10 + sldr_index); + } + + /* + * The following call handles a special pair of properties that shift + * to make room for a wheel enable control in the case of IQS7222C. + */ + return iqs7222_parse_props(iqs7222, &sldr_node, sldr_index, + IQS7222_REG_GRP_SLDR, + dev_desc->wheel_enable ? + IQS7222_REG_KEY_WHEEL : + IQS7222_REG_KEY_NO_WHEEL); +} + +static int iqs7222_parse_all(struct iqs7222_private *iqs7222) +{ + const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc; + const struct iqs7222_reg_grp_desc *reg_grps = dev_desc->reg_grps; + u16 *sys_setup = iqs7222->sys_setup; + int error, i; + + if (dev_desc->event_offset) + sys_setup[dev_desc->event_offset] = IQS7222_EVENT_MASK_ATI; + + for (i = 0; i < reg_grps[IQS7222_REG_GRP_CYCLE].num_row; i++) { + error = iqs7222_parse_cycle(iqs7222, i); + if (error) + return error; + } + + error = iqs7222_parse_props(iqs7222, NULL, 0, IQS7222_REG_GRP_GLBL, + IQS7222_REG_KEY_NONE); + if (error) + return error; + + for (i = 0; i < reg_grps[IQS7222_REG_GRP_GPIO].num_row; i++) { + struct fwnode_handle *gpio_node = NULL; + u16 *gpio_setup = iqs7222->gpio_setup[i]; + int j; + + gpio_setup[0] &= ~IQS7222_GPIO_SETUP_0_GPIO_EN; + gpio_setup[1] = 0; + gpio_setup[2] = 0; + + error = iqs7222_parse_props(iqs7222, &gpio_node, i, + IQS7222_REG_GRP_GPIO, + IQS7222_REG_KEY_NONE); + if (error) + return error; + + if (reg_grps[IQS7222_REG_GRP_GPIO].num_row == 1) + continue; + + /* + * The IQS7222C exposes multiple GPIO and must be informed + * as to which GPIO this group represents. + */ + for (j = 0; j < ARRAY_SIZE(iqs7222_gpio_links); j++) + gpio_setup[0] &= ~BIT(iqs7222_gpio_links[j]); + + gpio_setup[0] |= BIT(iqs7222_gpio_links[i]); + } + + for (i = 0; i < reg_grps[IQS7222_REG_GRP_CHAN].num_row; i++) { + u16 *chan_setup = iqs7222->chan_setup[i]; + + chan_setup[0] &= ~IQS7222_CHAN_SETUP_0_REF_MODE_MASK; + chan_setup[0] &= ~IQS7222_CHAN_SETUP_0_CHAN_EN; + + chan_setup[5] = 0; + } + + for (i = 0; i < reg_grps[IQS7222_REG_GRP_CHAN].num_row; i++) { + error = iqs7222_parse_chan(iqs7222, i); + if (error) + return error; + } + + error = iqs7222_parse_props(iqs7222, NULL, 0, IQS7222_REG_GRP_FILT, + IQS7222_REG_KEY_NONE); + if (error) + return error; + + for (i = 0; i < reg_grps[IQS7222_REG_GRP_SLDR].num_row; i++) { + u16 *sldr_setup = iqs7222->sldr_setup[i]; + + sldr_setup[0] &= ~IQS7222_SLDR_SETUP_0_CHAN_CNT_MASK; + + error = iqs7222_parse_sldr(iqs7222, i); + if (error) + return error; + } + + sys_setup[0] &= ~IQS7222_SYS_SETUP_INTF_MODE_MASK; + sys_setup[0] &= ~IQS7222_SYS_SETUP_PWR_MODE_MASK; + + sys_setup[0] |= IQS7222_SYS_SETUP_ACK_RESET; + + return iqs7222_parse_props(iqs7222, NULL, 0, IQS7222_REG_GRP_SYS, + IQS7222_REG_KEY_NONE); +} + +static int iqs7222_report(struct iqs7222_private *iqs7222) +{ + const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc; + struct i2c_client *client = iqs7222->client; + u16 sys_setup = iqs7222->sys_setup[0] & ~IQS7222_SYS_SETUP_ACK_RESET; + int num_chan = dev_desc->reg_grps[IQS7222_REG_GRP_CHAN].num_row; + int num_stat = dev_desc->reg_grps[IQS7222_REG_GRP_STAT].num_col; + int error, i, j; + __le16 mbuf[IQS7222_MAX_COLS_STAT]; + + error = iqs7222_read_burst(iqs7222, IQS7222_SYS_STATUS, mbuf, + num_stat * sizeof(__le16)); + if (error) { + dev_err(&client->dev, "Failed to read device status: %d\n", + error); + return error; + } + + if (le16_to_cpu(mbuf[0]) & IQS7222_SYS_STATUS_RESET) { + dev_err(&client->dev, "Unexpected device reset\n"); + + error = iqs7222_dev_init(iqs7222, WRITE); + if (error) + dev_err(&client->dev, + "Failed to initialize device: %d\n", error); + + return error; + } + + if (le16_to_cpu(mbuf[0]) & IQS7222_SYS_STATUS_ATI_ERROR) { + dev_err(&client->dev, "Unexpected ATI error\n"); + + error = iqs7222_write_word(iqs7222, IQS7222_SYS_SETUP, + sys_setup | + IQS7222_SYS_SETUP_REDO_ATI); + if (error) + dev_err(&client->dev, + "Failed to trigger ATI: %d\n", error); + + return error; + } + + if (le16_to_cpu(mbuf[0]) & IQS7222_SYS_STATUS_ATI_ACTIVE) + return 0; + + for (i = 0; i < num_chan; i++) { + u16 *chan_setup = iqs7222->chan_setup[i]; + + if (!(chan_setup[0] & IQS7222_CHAN_SETUP_0_CHAN_EN)) + continue; + + for (j = 0; j < ARRAY_SIZE(iqs7222_kp_events); j++) { + /* + * Proximity state begins at offset 2 and spills into + * offset 3 for devices with more than 16 channels. + * + * Touch state begins at the first offset immediately + * following proximity state. + */ + int k = 2 + j * (num_chan > 16 ? 2 : 1); + u16 state = le16_to_cpu(mbuf[k + i / 16]); + + input_event(iqs7222->keypad, + iqs7222->kp_type[i][j], + iqs7222->kp_code[i][j], + !!(state & BIT(i % 16))); + } + } + + for (i = 0; i < dev_desc->reg_grps[IQS7222_REG_GRP_SLDR].num_row; i++) { + u16 *sldr_setup = iqs7222->sldr_setup[i]; + u16 sldr_pos = le16_to_cpu(mbuf[4 + i]); + u16 state = le16_to_cpu(mbuf[6 + i]); + + if (!(sldr_setup[0] & IQS7222_SLDR_SETUP_0_CHAN_CNT_MASK)) + continue; + + if (sldr_pos < dev_desc->sldr_res) + input_report_abs(iqs7222->keypad, iqs7222->sl_axis[i], + sldr_pos); + + for (j = 0; j < ARRAY_SIZE(iqs7222_sl_events); j++) { + u16 mask = iqs7222_sl_events[j].mask; + u16 val = iqs7222_sl_events[j].val; + + if (!iqs7222_sl_events[j].enable) { + input_report_key(iqs7222->keypad, + iqs7222->sl_code[i][j], + sldr_pos < dev_desc->sldr_res); + continue; + } + + /* + * The remaining offsets represent gesture state, and + * are discarded in the case of IQS7222C because only + * absolute position is reported. + */ + if (num_stat < IQS7222_MAX_COLS_STAT) + continue; + + input_report_key(iqs7222->keypad, + iqs7222->sl_code[i][j], + (state & mask) == val); + } + } + + input_sync(iqs7222->keypad); + + return 0; +} + +static irqreturn_t iqs7222_irq(int irq, void *context) +{ + struct iqs7222_private *iqs7222 = context; + + return iqs7222_report(iqs7222) ? IRQ_NONE : IRQ_HANDLED; +} + +static int iqs7222_probe(struct i2c_client *client) +{ + struct iqs7222_private *iqs7222; + unsigned long irq_flags; + int error, irq; + + iqs7222 = devm_kzalloc(&client->dev, sizeof(*iqs7222), GFP_KERNEL); + if (!iqs7222) + return -ENOMEM; + + i2c_set_clientdata(client, iqs7222); + iqs7222->client = client; + + iqs7222->keypad = devm_input_allocate_device(&client->dev); + if (!iqs7222->keypad) + return -ENOMEM; + + iqs7222->keypad->name = client->name; + iqs7222->keypad->id.bustype = BUS_I2C; + + /* + * The RDY pin behaves as an interrupt, but must also be polled ahead + * of unsolicited I2C communication. As such, it is first opened as a + * GPIO and then passed to gpiod_to_irq() to register the interrupt. + */ + iqs7222->irq_gpio = devm_gpiod_get(&client->dev, "irq", GPIOD_IN); + if (IS_ERR(iqs7222->irq_gpio)) { + error = PTR_ERR(iqs7222->irq_gpio); + dev_err(&client->dev, "Failed to request IRQ GPIO: %d\n", + error); + return error; + } + + iqs7222->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset", + GPIOD_OUT_HIGH); + if (IS_ERR(iqs7222->reset_gpio)) { + error = PTR_ERR(iqs7222->reset_gpio); + dev_err(&client->dev, "Failed to request reset GPIO: %d\n", + error); + return error; + } + + error = iqs7222_hard_reset(iqs7222); + if (error) + return error; + + error = iqs7222_dev_info(iqs7222); + if (error) + return error; + + error = iqs7222_dev_init(iqs7222, READ); + if (error) + return error; + + error = iqs7222_parse_all(iqs7222); + if (error) + return error; + + error = iqs7222_dev_init(iqs7222, WRITE); + if (error) + return error; + + error = iqs7222_report(iqs7222); + if (error) + return error; + + error = input_register_device(iqs7222->keypad); + if (error) { + dev_err(&client->dev, "Failed to register device: %d\n", error); + return error; + } + + irq = gpiod_to_irq(iqs7222->irq_gpio); + if (irq < 0) + return irq; + + irq_flags = gpiod_is_active_low(iqs7222->irq_gpio) ? IRQF_TRIGGER_LOW + : IRQF_TRIGGER_HIGH; + irq_flags |= IRQF_ONESHOT; + + error = devm_request_threaded_irq(&client->dev, irq, NULL, iqs7222_irq, + irq_flags, client->name, iqs7222); + if (error) + dev_err(&client->dev, "Failed to request IRQ: %d\n", error); + + return error; +} + +static const struct of_device_id iqs7222_of_match[] = { + { .compatible = "azoteq,iqs7222a" }, + { .compatible = "azoteq,iqs7222b" }, + { .compatible = "azoteq,iqs7222c" }, + { } +}; +MODULE_DEVICE_TABLE(of, iqs7222_of_match); + +static struct i2c_driver iqs7222_i2c_driver = { + .driver = { + .name = "iqs7222", + .of_match_table = iqs7222_of_match, + }, + .probe_new = iqs7222_probe, +}; +module_i2c_driver(iqs7222_i2c_driver); + +MODULE_AUTHOR("Jeff LaBundy "); +MODULE_DESCRIPTION("Azoteq IQS7222A/B/C Capacitive Touch Controller"); +MODULE_LICENSE("GPL");