From patchwork Wed Feb 23 07:55:26 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Srinivasa Rao Mandadapu X-Patchwork-Id: 545630 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 56622C433EF for ; Wed, 23 Feb 2022 07:57:34 +0000 (UTC) Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id 999CF1A6A; Wed, 23 Feb 2022 08:56:42 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz 999CF1A6A DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1645603052; bh=W1rVvpRm3s1Tv74xzLLvf2qCMAmvOeaoIXzf9dWgcQc=; h=From:To:Subject:Date:In-Reply-To:References:Cc:List-Id: List-Unsubscribe:List-Archive:List-Post:List-Help:List-Subscribe: From; b=PH5Xqtz9Nzr+rbhfveXIuH/ekVKw1ONCSeUJm5HjXO/BEWpQEW3VPlY1wjsZDime8 zmGulHgk/hmMSLqri6/bUWzeEpvjKt//WtABgIqL0OGiuKpHS5Y3mEklOEUHhULqQI tdZr5Pas9tYk1Xa5TO+YJw0FOJ/dujTnyZDRryHU= Received: from alsa1.perex.cz (localhost.localdomain [127.0.0.1]) by alsa1.perex.cz (Postfix) with ESMTP id DCECAF80511; Wed, 23 Feb 2022 08:56:07 +0100 (CET) Received: by alsa1.perex.cz (Postfix, from userid 50401) id 30C1CF80511; Wed, 23 Feb 2022 08:56:06 +0100 (CET) Received: from alexa-out.qualcomm.com (alexa-out.qualcomm.com [129.46.98.28]) (using TLSv1.2 with cipher AES256-SHA (256/256 bits)) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id 8AE33F800F5 for ; Wed, 23 Feb 2022 08:55:59 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz 8AE33F800F5 Authentication-Results: alsa1.perex.cz; dkim=pass (1024-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="GzksuEUz" DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; i=@quicinc.com; q=dns/txt; s=qcdkim; t=1645602961; x=1677138961; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version; bh=rKR8R2xrvVMhCLJudTmph3ry8li11n/7voUDkq7zraY=; b=GzksuEUzdxEkSp127h3Me8xoqeR2Qa7d6t2j4HRqfRFoBiuvqUSV7krE 4nBvOpDFXOQ4sZuFj1EmWOgxqxscdtBBEI+0tTmK2QWE4IshuR5Zq83RJ 0x0pEPnEJFE58LQ/eKC7XJvxZz/JYgZxu5EHAyS5cTgiuNaVwc4CbkzYu M=; Received: from ironmsg07-lv.qualcomm.com ([10.47.202.151]) by alexa-out.qualcomm.com with ESMTP; 22 Feb 2022 23:55:57 -0800 X-QCInternal: smtphost Received: from nasanex01c.na.qualcomm.com ([10.47.97.222]) by ironmsg07-lv.qualcomm.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 22 Feb 2022 23:55:56 -0800 Received: from nalasex01a.na.qualcomm.com (10.47.209.196) by nasanex01c.na.qualcomm.com (10.47.97.222) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Tue, 22 Feb 2022 23:55:55 -0800 Received: from hu-srivasam-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Tue, 22 Feb 2022 23:55:49 -0800 From: Srinivasa Rao Mandadapu To: , , , , , , , , , , , , , , , , , Linus Walleij , Subject: [PATCH v9 1/7] dt-bindings: pinctrl: qcom: Update lpass lpi file name to SoC specific Date: Wed, 23 Feb 2022 13:25:26 +0530 Message-ID: <1645602932-6659-2-git-send-email-quic_srivasam@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1645602932-6659-1-git-send-email-quic_srivasam@quicinc.com> References: <1645602932-6659-1-git-send-email-quic_srivasam@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) Cc: Venkata Prasad Potturu , Srinivasa Rao Mandadapu X-BeenThere: alsa-devel@alsa-project.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: "Alsa-devel" Change generic lpass lpi pincotrol bindings file to SoC specific file, to distinguish and accomadate other SoC specific dt bindings. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu Acked-by: Rob Herring Reviewed-by: Stephen Boyd --- .../bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml | 133 --------------------- .../pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml | 133 +++++++++++++++++++++ 2 files changed, 133 insertions(+), 133 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml deleted file mode 100644 index 5c5542f..0000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml +++ /dev/null @@ -1,133 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-pinctrl.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) - Low Power Island (LPI) TLMM block - -maintainers: - - Srinivas Kandagatla - -description: | - This binding describes the Top Level Mode Multiplexer block found in the - LPASS LPI IP on most Qualcomm SoCs - -properties: - compatible: - const: qcom,sm8250-lpass-lpi-pinctrl - - reg: - minItems: 2 - maxItems: 2 - - clocks: - items: - - description: LPASS Core voting clock - - description: LPASS Audio voting clock - - clock-names: - items: - - const: core - - const: audio - - gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - -#PIN CONFIGURATION NODES -patternProperties: - '-pins$': - type: object - description: - Pinctrl node's client devices use subnodes for desired pin configuration. - Client device subnodes use below standard properties. - $ref: "/schemas/pinctrl/pincfg-node.yaml" - - properties: - pins: - description: - List of gpio pins affected by the properties specified in this - subnode. - items: - oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9])$" - minItems: 1 - maxItems: 14 - - function: - enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws, - qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk, - dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data, - i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk, - dmic3_data, i2s2_data ] - description: - Specify the alternative function to be configured for the specified - pins. - - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - slew-rate: - enum: [0, 1, 2, 3] - default: 0 - description: | - 0: No adjustments - 1: Higher Slew rate (faster edges) - 2: Lower Slew rate (slower edges) - 3: Reserved (No adjustments) - - bias-pull-down: true - - bias-pull-up: true - - bias-disable: true - - output-high: true - - output-low: true - - required: - - pins - - function - - additionalProperties: false - -allOf: - - $ref: "pinctrl.yaml#" - -required: - - compatible - - reg - - clocks - - clock-names - - gpio-controller - - '#gpio-cells' - - gpio-ranges - -additionalProperties: false - -examples: - - | - #include - lpi_tlmm: pinctrl@33c0000 { - compatible = "qcom,sm8250-lpass-lpi-pinctrl"; - reg = <0x33c0000 0x20000>, - <0x3550000 0x10000>; - clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, - <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - clock-names = "core", "audio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&lpi_tlmm 0 0 14>; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml new file mode 100644 index 0000000..06efb13 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) + Low Power Island (LPI) TLMM block + +maintainers: + - Srinivas Kandagatla + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + LPASS LPI IP on most Qualcomm SoCs + +properties: + compatible: + const: qcom,sm8250-lpass-lpi-pinctrl + + reg: + minItems: 2 + maxItems: 2 + + clocks: + items: + - description: LPASS Core voting clock + - description: LPASS Audio voting clock + + clock-names: + items: + - const: core + - const: audio + + gpio-controller: true + + '#gpio-cells': + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: "/schemas/pinctrl/pincfg-node.yaml" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9])$" + minItems: 1 + maxItems: 14 + + function: + enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws, + qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk, + dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data, + i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk, + dmic3_data, i2s2_data ] + description: + Specify the alternative function to be configured for the specified + pins. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + slew-rate: + enum: [0, 1, 2, 3] + default: 0 + description: | + 0: No adjustments + 1: Higher Slew rate (faster edges) + 2: Lower Slew rate (slower edges) + 3: Reserved (No adjustments) + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + required: + - pins + - function + + additionalProperties: false + +allOf: + - $ref: "pinctrl.yaml#" + +required: + - compatible + - reg + - clocks + - clock-names + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include + lpi_tlmm: pinctrl@33c0000 { + compatible = "qcom,sm8250-lpass-lpi-pinctrl"; + reg = <0x33c0000 0x20000>, + <0x3550000 0x10000>; + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpi_tlmm 0 0 14>; + }; From patchwork Wed Feb 23 07:55:27 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Srinivasa Rao Mandadapu X-Patchwork-Id: 545247 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id E6FF4C433F5 for ; Wed, 23 Feb 2022 07:57:43 +0000 (UTC) Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id 31BC81A44; Wed, 23 Feb 2022 08:56:52 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz 31BC81A44 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1645603062; bh=HSjIFBA0NEB+IiUlsgxwaJuvrNUUtYH5i8FRAt8mxHs=; h=From:To:Subject:Date:In-Reply-To:References:Cc:List-Id: List-Unsubscribe:List-Archive:List-Post:List-Help:List-Subscribe: From; b=NAQai2hMFny65fGEIqy7v7ASGkSTF+30X12J5R+ZrI3KlkNMJjkZ3VbzIWMLlQ+eF sJiRV2MUsE13tPi2Zp5/It7bkp+kRMrDa6TxHpHQ1Po/kN70hnPFaPUCldzqaDumnb ExuErnRjyR0C+FXhhCRpfHtlaQTQItPlZRrquIWA= Received: from alsa1.perex.cz (localhost.localdomain [127.0.0.1]) by alsa1.perex.cz (Postfix) with ESMTP id 5FEDCF80518; Wed, 23 Feb 2022 08:56:09 +0100 (CET) Received: by alsa1.perex.cz (Postfix, from userid 50401) id 555E3F80518; Wed, 23 Feb 2022 08:56:08 +0100 (CET) Received: from alexa-out-sd-01.qualcomm.com (alexa-out-sd-01.qualcomm.com [199.106.114.38]) (using TLSv1.2 with cipher AES256-SHA (256/256 bits)) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id 70660F8019D for ; Wed, 23 Feb 2022 08:56:05 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz 70660F8019D Authentication-Results: alsa1.perex.cz; dkim=pass (1024-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="Ps/vJCrP" DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; i=@quicinc.com; q=dns/txt; s=qcdkim; t=1645602966; x=1677138966; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version; bh=As1X0P/G4QwXKGqgTUAbh2m46WDe6bYCw7umSlOuyHc=; b=Ps/vJCrPodeZx1VR7i7aL/yKQ/9x6UyC5TNrNB9ANrtS3pSFCvhb7cMn 9jW4MelDu+z8QNN+GSrUY3y19OmhxqjhgquGnjz1kvP0NzBq4K1St4MyH r+wkOvJgHmWUNDB0uprU61RKCTrI5G0jdSWmFsSFbErsmTQyTwRQDABQ6 I=; Received: from unknown (HELO ironmsg04-sd.qualcomm.com) ([10.53.140.144]) by alexa-out-sd-01.qualcomm.com with ESMTP; 22 Feb 2022 23:56:03 -0800 X-QCInternal: smtphost Received: from nasanex01c.na.qualcomm.com ([10.47.97.222]) by ironmsg04-sd.qualcomm.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 22 Feb 2022 23:56:01 -0800 Received: from nalasex01a.na.qualcomm.com (10.47.209.196) by nasanex01c.na.qualcomm.com (10.47.97.222) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Tue, 22 Feb 2022 23:56:01 -0800 Received: from hu-srivasam-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Tue, 22 Feb 2022 23:55:55 -0800 From: Srinivasa Rao Mandadapu To: , , , , , , , , , , , , , , , , , Linus Walleij , Subject: [PATCH v9 2/7] dt-bindings: pinctrl: qcom: Add sc7280 lpass lpi pinctrl bindings Date: Wed, 23 Feb 2022 13:25:27 +0530 Message-ID: <1645602932-6659-3-git-send-email-quic_srivasam@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1645602932-6659-1-git-send-email-quic_srivasam@quicinc.com> References: <1645602932-6659-1-git-send-email-quic_srivasam@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) Cc: Venkata Prasad Potturu , Srinivasa Rao Mandadapu X-BeenThere: alsa-devel@alsa-project.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: "Alsa-devel" Add device tree binding Documentation details for Qualcomm SC7280 LPASS LPI pinctrl driver. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu Reviewed-by: Rob Herring Reviewed-by: Stephen Boyd --- .../pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml | 115 +++++++++++++++++++++ 1 file changed, 115 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml new file mode 100644 index 0000000..d32ee32 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) + Low Power Island (LPI) TLMM block + +maintainers: + - Srinivasa Rao Mandadapu + - Srinivas Kandagatla + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + LPASS LPI IP on most Qualcomm SoCs + +properties: + compatible: + const: qcom,sc7280-lpass-lpi-pinctrl + + reg: + minItems: 2 + maxItems: 2 + + gpio-controller: true + + '#gpio-cells': + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: "/schemas/pinctrl/pincfg-node.yaml" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9])$" + minItems: 1 + maxItems: 15 + + function: + enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws, + qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk, + dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data, + i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk, + dmic3_data, i2s2_data ] + description: + Specify the alternative function to be configured for the specified + pins. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + slew-rate: + enum: [0, 1, 2, 3] + default: 0 + description: | + 0: No adjustments + 1: Higher Slew rate (faster edges) + 2: Lower Slew rate (slower edges) + 3: Reserved (No adjustments) + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + required: + - pins + - function + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + lpass_tlmm: pinctrl@33c0000 { + compatible = "qcom,sc7280-lpass-lpi-pinctrl"; + reg = <0x33c0000 0x20000>, + <0x3550000 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 15>; + }; From patchwork Wed Feb 23 07:55:28 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Srinivasa Rao Mandadapu X-Patchwork-Id: 545629 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 62CB0C433EF for ; Wed, 23 Feb 2022 07:57:48 +0000 (UTC) Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id 977391A4D; Wed, 23 Feb 2022 08:56:56 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz 977391A4D DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1645603066; bh=IboTaQp3Jif4n5Tyo92Q8zi7rOPMLE6/SVh2yfn0QP4=; h=From:To:Subject:Date:In-Reply-To:References:Cc:List-Id: List-Unsubscribe:List-Archive:List-Post:List-Help:List-Subscribe: From; b=fmnJ/3foazijJU3FuVoKSMBlL7HdPT4IOuEmGCuNLKgkQQD40Ob5rx0Gnfa6UkbKl 4HdUV+6aPaDksxjzKrYtl+tvPF4KqRG2Wn4lTc0qQoa1kqt1p6uF4edybHNIRRg7Ba KCFdDqck7XzcWpKjqFMFOBOeDnPs/VNwLxct+tdo= Received: from alsa1.perex.cz (localhost.localdomain [127.0.0.1]) by alsa1.perex.cz (Postfix) with ESMTP id DE95AF8051B; Wed, 23 Feb 2022 08:56:11 +0100 (CET) Received: by alsa1.perex.cz (Postfix, from userid 50401) id 23E48F8051C; Wed, 23 Feb 2022 08:56:11 +0100 (CET) Received: from alexa-out-sd-01.qualcomm.com (alexa-out-sd-01.qualcomm.com [199.106.114.38]) (using TLSv1.2 with cipher AES256-SHA (256/256 bits)) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id 5E614F80517 for ; Wed, 23 Feb 2022 08:56:08 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz 5E614F80517 Authentication-Results: alsa1.perex.cz; dkim=pass (1024-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="oGdMvKIA" DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; i=@quicinc.com; q=dns/txt; s=qcdkim; t=1645602969; x=1677138969; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version; bh=roSqU36Adr9386w74UOIuRbDpcTuMh3ZyBZQv5izzMU=; b=oGdMvKIA1zaLuV/EEpQBcwk85Um9dv0LUxOrb4wz/0/zkfpJ+0Q5IT10 ALftmXqDdfIKSVFRmSOw9j9r/xqGbURMGi36yFo1I0GdWpCwNblmTRtev s9lvdGAVnMRvUPpFNl1q+K9AbHGRDg0f9/8XPW41DpRY6ngtgg8CsZf6j E=; Received: from unknown (HELO ironmsg-SD-alpha.qualcomm.com) ([10.53.140.30]) by alexa-out-sd-01.qualcomm.com with ESMTP; 22 Feb 2022 23:56:08 -0800 X-QCInternal: smtphost Received: from nasanex01c.na.qualcomm.com ([10.47.97.222]) by ironmsg-SD-alpha.qualcomm.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 22 Feb 2022 23:56:07 -0800 Received: from nalasex01a.na.qualcomm.com (10.47.209.196) by nasanex01c.na.qualcomm.com (10.47.97.222) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Tue, 22 Feb 2022 23:56:07 -0800 Received: from hu-srivasam-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Tue, 22 Feb 2022 23:56:01 -0800 From: Srinivasa Rao Mandadapu To: , , , , , , , , , , , , , , , , , Linus Walleij , Subject: [PATCH v9 3/7] pinctrl: qcom: Update macro name to LPI specific Date: Wed, 23 Feb 2022 13:25:28 +0530 Message-ID: <1645602932-6659-4-git-send-email-quic_srivasam@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1645602932-6659-1-git-send-email-quic_srivasam@quicinc.com> References: <1645602932-6659-1-git-send-email-quic_srivasam@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) Cc: Venkata Prasad Potturu , Srinivasa Rao Mandadapu X-BeenThere: alsa-devel@alsa-project.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: "Alsa-devel" Update NO_SLEW macro to LPI_NO_SLEW macro as this driver lpi specific. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu Reviewed-by: Stephen Boyd --- drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c index 2f19ab4..3c15f80 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c @@ -40,7 +40,7 @@ #define LPI_GPIO_KEEPER 0x2 #define LPI_GPIO_PULL_UP 0x3 #define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1) -#define NO_SLEW -1 +#define LPI_NO_SLEW -1 #define LPI_FUNCTION(fname) \ [LPI_MUX_##fname] = { \ @@ -193,14 +193,14 @@ static const struct lpi_pingroup sm8250_groups[] = { LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _), LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _), LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _), - LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _, _), - LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _), - LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _), - LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _), + LPI_PINGROUP(6, LPI_NO_SLEW, dmic1_clk, i2s1_clk, _, _), + LPI_PINGROUP(7, LPI_NO_SLEW, dmic1_data, i2s1_ws, _, _), + LPI_PINGROUP(8, LPI_NO_SLEW, dmic2_clk, i2s1_data, _, _), + LPI_PINGROUP(9, LPI_NO_SLEW, dmic2_data, i2s1_data, _, _), LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _), LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _), - LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _), - LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _), + LPI_PINGROUP(12, LPI_NO_SLEW, dmic3_clk, i2s2_data, _, _), + LPI_PINGROUP(13, LPI_NO_SLEW, dmic3_data, i2s2_data, _, _), }; static const struct lpi_function sm8250_functions[] = { @@ -435,7 +435,7 @@ static int lpi_config_set(struct pinctrl_dev *pctldev, unsigned int group, } slew_offset = g->slew_offset; - if (slew_offset == NO_SLEW) + if (slew_offset == LPI_NO_SLEW) break; mutex_lock(&pctrl->slew_access_lock); From patchwork Wed Feb 23 07:55:29 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Srinivasa Rao Mandadapu X-Patchwork-Id: 545246 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id DBD08C433F5 for ; Wed, 23 Feb 2022 07:58:16 +0000 (UTC) Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id 03E2E1A9C; Wed, 23 Feb 2022 08:57:25 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz 03E2E1A9C DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1645603095; bh=sf9HVST5mktgIpvoJ1djIwG3oOrEeqymQ7eKnd3pJkw=; h=From:To:Subject:Date:In-Reply-To:References:Cc:List-Id: List-Unsubscribe:List-Archive:List-Post:List-Help:List-Subscribe: From; b=TAO5aBLjRrJbEj76OZwvNss/rH7Dr6ofVxL/0B6nn+0+bU9FT5Yil3fbCefIV4Fy4 jDfLfZ782TnKTATz/fTLKqmRcyVRrCf79jdKgavZeZxIRgxNFnQl8Uo/ZPzatMZu5r TawExRibuseA58/GfHBevkS9lEoiLKKRhpIkyUtw= Received: from alsa1.perex.cz (localhost.localdomain [127.0.0.1]) by alsa1.perex.cz (Postfix) with ESMTP id 759ABF8051F; Wed, 23 Feb 2022 08:56:18 +0100 (CET) Received: by alsa1.perex.cz (Postfix, from userid 50401) id 7BD1EF80520; Wed, 23 Feb 2022 08:56:17 +0100 (CET) Received: from alexa-out-sd-01.qualcomm.com (alexa-out-sd-01.qualcomm.com [199.106.114.38]) (using TLSv1.2 with cipher AES256-SHA (256/256 bits)) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id 769BCF8051C for ; Wed, 23 Feb 2022 08:56:14 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz 769BCF8051C Authentication-Results: alsa1.perex.cz; dkim=pass (1024-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="vg0SyfO2" DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; i=@quicinc.com; q=dns/txt; s=qcdkim; t=1645602975; x=1677138975; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version; bh=uHYs5i5tsOn7AC9eTjApEogxg8S/6QrNxF6kUCTkTSE=; b=vg0SyfO2KvBHcbwI95uhwHu9Bf5CqApQ5NEdXI/AIXy0wlu02eqnkjBE ztVAhT3NLCRbexeajpBH5mPRm+bxfVQIC0B6UnkdOPJx9iMPovoZPo1Cj ZAdj8eDI/7rW8v7MP9gK6fipMX2oC7mDoJAqziAx2jQnb9hTny+eaZ8Px 0=; Received: from unknown (HELO ironmsg04-sd.qualcomm.com) ([10.53.140.144]) by alexa-out-sd-01.qualcomm.com with ESMTP; 22 Feb 2022 23:56:14 -0800 X-QCInternal: smtphost Received: from nasanex01c.na.qualcomm.com ([10.47.97.222]) by ironmsg04-sd.qualcomm.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 22 Feb 2022 23:56:13 -0800 Received: from nalasex01a.na.qualcomm.com (10.47.209.196) by nasanex01c.na.qualcomm.com (10.47.97.222) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Tue, 22 Feb 2022 23:56:13 -0800 Received: from hu-srivasam-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Tue, 22 Feb 2022 23:56:07 -0800 From: Srinivasa Rao Mandadapu To: , , , , , , , , , , , , , , , , , Linus Walleij , Subject: [PATCH v9 4/7] pinctrl: qcom: Update lpi pin group structure Date: Wed, 23 Feb 2022 13:25:29 +0530 Message-ID: <1645602932-6659-5-git-send-email-quic_srivasam@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1645602932-6659-1-git-send-email-quic_srivasam@quicinc.com> References: <1645602932-6659-1-git-send-email-quic_srivasam@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) Cc: Venkata Prasad Potturu , Srinivasa Rao Mandadapu X-BeenThere: alsa-devel@alsa-project.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: "Alsa-devel" Update lpi group structure with core group_desc structure to avoid redundant struct params. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu --- drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 44 +++++++++++++++----------------- 1 file changed, 21 insertions(+), 23 deletions(-) diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c index 3c15f80..54750ba 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c @@ -51,11 +51,11 @@ #define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \ { \ - .name = "gpio" #id, \ - .pins = gpio##id##_pins, \ + .group.name = "gpio" #id, \ + .group.pins = gpio##id##_pins, \ .pin = id, \ .slew_offset = soff, \ - .npins = ARRAY_SIZE(gpio##id##_pins), \ + .group.num_pins = ARRAY_SIZE(gpio##id##_pins), \ .funcs = (int[]){ \ LPI_MUX_gpio, \ LPI_MUX_##f1, \ @@ -67,9 +67,7 @@ } struct lpi_pingroup { - const char *name; - const unsigned int *pins; - unsigned int npins; + struct group_desc group; unsigned int pin; /* Bit offset in slew register for SoundWire pins only */ int slew_offset; @@ -150,20 +148,20 @@ enum sm8250_lpi_functions { LPI_MUX__, }; -static const unsigned int gpio0_pins[] = { 0 }; -static const unsigned int gpio1_pins[] = { 1 }; -static const unsigned int gpio2_pins[] = { 2 }; -static const unsigned int gpio3_pins[] = { 3 }; -static const unsigned int gpio4_pins[] = { 4 }; -static const unsigned int gpio5_pins[] = { 5 }; -static const unsigned int gpio6_pins[] = { 6 }; -static const unsigned int gpio7_pins[] = { 7 }; -static const unsigned int gpio8_pins[] = { 8 }; -static const unsigned int gpio9_pins[] = { 9 }; -static const unsigned int gpio10_pins[] = { 10 }; -static const unsigned int gpio11_pins[] = { 11 }; -static const unsigned int gpio12_pins[] = { 12 }; -static const unsigned int gpio13_pins[] = { 13 }; +static int gpio0_pins[] = { 0 }; +static int gpio1_pins[] = { 1 }; +static int gpio2_pins[] = { 2 }; +static int gpio3_pins[] = { 3 }; +static int gpio4_pins[] = { 4 }; +static int gpio5_pins[] = { 5 }; +static int gpio6_pins[] = { 6 }; +static int gpio7_pins[] = { 7 }; +static int gpio8_pins[] = { 8 }; +static int gpio9_pins[] = { 9 }; +static int gpio10_pins[] = { 10 }; +static int gpio11_pins[] = { 11 }; +static int gpio12_pins[] = { 12 }; +static int gpio13_pins[] = { 13 }; static const char * const swr_tx_clk_groups[] = { "gpio0" }; static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" }; static const char * const swr_rx_clk_groups[] = { "gpio3" }; @@ -262,7 +260,7 @@ static const char *lpi_gpio_get_group_name(struct pinctrl_dev *pctldev, { struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); - return pctrl->data->groups[group].name; + return pctrl->data->groups[group].group.name; } static int lpi_gpio_get_group_pins(struct pinctrl_dev *pctldev, @@ -272,8 +270,8 @@ static int lpi_gpio_get_group_pins(struct pinctrl_dev *pctldev, { struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); - *pins = pctrl->data->groups[group].pins; - *num_pins = pctrl->data->groups[group].npins; + *pins = pctrl->data->groups[group].group.pins; + *num_pins = pctrl->data->groups[group].group.num_pins; return 0; } From patchwork Wed Feb 23 07:55:30 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Srinivasa Rao Mandadapu X-Patchwork-Id: 545628 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 9924DC433F5 for ; Wed, 23 Feb 2022 07:58:37 +0000 (UTC) Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id D1B6C1A6C; Wed, 23 Feb 2022 08:57:45 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz D1B6C1A6C DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1645603115; bh=GIvp2gbhi0o2gsOQF4PFpC/poXqTwaaRtU6bXG1hNQ0=; h=From:To:Subject:Date:In-Reply-To:References:Cc:List-Id: List-Unsubscribe:List-Archive:List-Post:List-Help:List-Subscribe: From; b=MgE3+OndFCb9FfusXYbMI5PbNYfQibXefq1Il10s6Qxa/thqZnEMWoNrXiJhaz2L/ cg3bDE0LfZIdIkAXQ6Qhu4/wTymNOWCrlmqmY6pST9z8HJKHmuK6x6NjIV0zwEGORZ L2b6GcfqAtvdMAt4T44qPsZ+Qdh3H9xzktfPV1bw= Received: from alsa1.perex.cz (localhost.localdomain [127.0.0.1]) by alsa1.perex.cz (Postfix) with ESMTP id 4E726F8052E; Wed, 23 Feb 2022 08:56:34 +0100 (CET) Received: by alsa1.perex.cz (Postfix, from userid 50401) id C67E6F80534; Wed, 23 Feb 2022 08:56:32 +0100 (CET) Received: from alexa-out-sd-01.qualcomm.com (alexa-out-sd-01.qualcomm.com [199.106.114.38]) (using TLSv1.2 with cipher AES256-SHA (256/256 bits)) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id E94DEF8052D for ; Wed, 23 Feb 2022 08:56:22 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz E94DEF8052D Authentication-Results: alsa1.perex.cz; dkim=pass (1024-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="DNqBPcUD" DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; i=@quicinc.com; q=dns/txt; s=qcdkim; t=1645602987; x=1677138987; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version; bh=6DleXNMZnhJyGihj3JVpSkWEzr9vNuIfgDi8ALz2RHA=; b=DNqBPcUDDnnhsv7dFszxKqYSNZMiG1N6LjkjZzgrH0bNavyeMSa8vs5J baRexJKdbpPHZ6Ltk/HaTI2cmjbXz8mhGWZqAkTFrVX+wUWE8DrVchNTe O23/CenQpxZr5qiKbtm6AGwL56/7yNu1TMYuLnRRGjGqNHn4DOpYvhz/F c=; Received: from unknown (HELO ironmsg02-sd.qualcomm.com) ([10.53.140.142]) by alexa-out-sd-01.qualcomm.com with ESMTP; 22 Feb 2022 23:56:21 -0800 X-QCInternal: smtphost Received: from nasanex01c.na.qualcomm.com ([10.47.97.222]) by ironmsg02-sd.qualcomm.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 22 Feb 2022 23:56:20 -0800 Received: from nalasex01a.na.qualcomm.com (10.47.209.196) by nasanex01c.na.qualcomm.com (10.47.97.222) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Tue, 22 Feb 2022 23:56:19 -0800 Received: from hu-srivasam-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Tue, 22 Feb 2022 23:56:13 -0800 From: Srinivasa Rao Mandadapu To: , , , , , , , , , , , , , , , , , Linus Walleij , Subject: [PATCH v9 5/7] pinctrl: qcom: Extract chip specific LPASS LPI code Date: Wed, 23 Feb 2022 13:25:30 +0530 Message-ID: <1645602932-6659-6-git-send-email-quic_srivasam@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1645602932-6659-1-git-send-email-quic_srivasam@quicinc.com> References: <1645602932-6659-1-git-send-email-quic_srivasam@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) Cc: Venkata Prasad Potturu , Srinivasa Rao Mandadapu X-BeenThere: alsa-devel@alsa-project.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: "Alsa-devel" Extract the chip specific SM8250 data from the LPASS LPI pinctrl driver to allow reusing the common code in the addition of subsequent platforms. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu Reported-by: kernel test robot --- drivers/pinctrl/qcom/Kconfig | 8 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 233 +----------------------- drivers/pinctrl/qcom/pinctrl-lpass-lpi.h | 85 +++++++++ drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c | 165 +++++++++++++++++ 5 files changed, 264 insertions(+), 228 deletions(-) create mode 100644 drivers/pinctrl/qcom/pinctrl-lpass-lpi.h create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig index ca6f68a..dc6716e 100644 --- a/drivers/pinctrl/qcom/Kconfig +++ b/drivers/pinctrl/qcom/Kconfig @@ -329,6 +329,14 @@ config PINCTRL_SM8250 Qualcomm Technologies Inc TLMM block found on the Qualcomm Technologies Inc SM8250 platform. +config PINCTRL_SM8250_LPASS_LPI + tristate "Qualcomm Technologies Inc SM8250 LPASS LPI pin controller driver" + select PINCTRL_LPASS_LPI + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI + (Low Power Island) found on the Qualcomm Technologies Inc SM8250 platform. + config PINCTRL_SM8350 tristate "Qualcomm Technologies Inc SM8350 pin controller driver" depends on PINCTRL_MSM diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile index 709882f..39650d6 100644 --- a/drivers/pinctrl/qcom/Makefile +++ b/drivers/pinctrl/qcom/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_PINCTRL_SM6350) += pinctrl-sm6350.o obj-$(CONFIG_PINCTRL_SDX65) += pinctrl-sdx65.o obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o +obj-$(CONFIG_PINCTRL_SM8250_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o obj-$(CONFIG_PINCTRL_SM8450) += pinctrl-sm8450.o obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c index 54750ba..1ab572f 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c @@ -4,91 +4,15 @@ * Copyright (c) 2020 Linaro Ltd. */ -#include -#include #include #include -#include #include #include -#include #include #include #include -#include -#include -#include -#include "../core.h" #include "../pinctrl-utils.h" - -#define LPI_SLEW_RATE_CTL_REG 0xa000 -#define LPI_TLMM_REG_OFFSET 0x1000 -#define LPI_SLEW_RATE_MAX 0x03 -#define LPI_SLEW_BITS_SIZE 0x02 -#define LPI_SLEW_RATE_MASK GENMASK(1, 0) -#define LPI_GPIO_CFG_REG 0x00 -#define LPI_GPIO_PULL_MASK GENMASK(1, 0) -#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2) -#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6) -#define LPI_GPIO_OE_MASK BIT(9) -#define LPI_GPIO_VALUE_REG 0x04 -#define LPI_GPIO_VALUE_IN_MASK BIT(0) -#define LPI_GPIO_VALUE_OUT_MASK BIT(1) - -#define LPI_GPIO_BIAS_DISABLE 0x0 -#define LPI_GPIO_PULL_DOWN 0x1 -#define LPI_GPIO_KEEPER 0x2 -#define LPI_GPIO_PULL_UP 0x3 -#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1) -#define LPI_NO_SLEW -1 - -#define LPI_FUNCTION(fname) \ - [LPI_MUX_##fname] = { \ - .name = #fname, \ - .groups = fname##_groups, \ - .ngroups = ARRAY_SIZE(fname##_groups), \ - } - -#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \ - { \ - .group.name = "gpio" #id, \ - .group.pins = gpio##id##_pins, \ - .pin = id, \ - .slew_offset = soff, \ - .group.num_pins = ARRAY_SIZE(gpio##id##_pins), \ - .funcs = (int[]){ \ - LPI_MUX_gpio, \ - LPI_MUX_##f1, \ - LPI_MUX_##f2, \ - LPI_MUX_##f3, \ - LPI_MUX_##f4, \ - }, \ - .nfuncs = 5, \ - } - -struct lpi_pingroup { - struct group_desc group; - unsigned int pin; - /* Bit offset in slew register for SoundWire pins only */ - int slew_offset; - unsigned int *funcs; - unsigned int nfuncs; -}; - -struct lpi_function { - const char *name; - const char * const *groups; - unsigned int ngroups; -}; - -struct lpi_pinctrl_variant_data { - const struct pinctrl_pin_desc *pins; - int npins; - const struct lpi_pingroup *groups; - int ngroups; - const struct lpi_function *functions; - int nfunctions; -}; +#include "pinctrl-lpass-lpi.h" #define MAX_LPI_NUM_CLKS 2 @@ -104,136 +28,6 @@ struct lpi_pinctrl { const struct lpi_pinctrl_variant_data *data; }; -/* sm8250 variant specific data */ -static const struct pinctrl_pin_desc sm8250_lpi_pins[] = { - PINCTRL_PIN(0, "gpio0"), - PINCTRL_PIN(1, "gpio1"), - PINCTRL_PIN(2, "gpio2"), - PINCTRL_PIN(3, "gpio3"), - PINCTRL_PIN(4, "gpio4"), - PINCTRL_PIN(5, "gpio5"), - PINCTRL_PIN(6, "gpio6"), - PINCTRL_PIN(7, "gpio7"), - PINCTRL_PIN(8, "gpio8"), - PINCTRL_PIN(9, "gpio9"), - PINCTRL_PIN(10, "gpio10"), - PINCTRL_PIN(11, "gpio11"), - PINCTRL_PIN(12, "gpio12"), - PINCTRL_PIN(13, "gpio13"), -}; - -enum sm8250_lpi_functions { - LPI_MUX_dmic1_clk, - LPI_MUX_dmic1_data, - LPI_MUX_dmic2_clk, - LPI_MUX_dmic2_data, - LPI_MUX_dmic3_clk, - LPI_MUX_dmic3_data, - LPI_MUX_i2s1_clk, - LPI_MUX_i2s1_data, - LPI_MUX_i2s1_ws, - LPI_MUX_i2s2_clk, - LPI_MUX_i2s2_data, - LPI_MUX_i2s2_ws, - LPI_MUX_qua_mi2s_data, - LPI_MUX_qua_mi2s_sclk, - LPI_MUX_qua_mi2s_ws, - LPI_MUX_swr_rx_clk, - LPI_MUX_swr_rx_data, - LPI_MUX_swr_tx_clk, - LPI_MUX_swr_tx_data, - LPI_MUX_wsa_swr_clk, - LPI_MUX_wsa_swr_data, - LPI_MUX_gpio, - LPI_MUX__, -}; - -static int gpio0_pins[] = { 0 }; -static int gpio1_pins[] = { 1 }; -static int gpio2_pins[] = { 2 }; -static int gpio3_pins[] = { 3 }; -static int gpio4_pins[] = { 4 }; -static int gpio5_pins[] = { 5 }; -static int gpio6_pins[] = { 6 }; -static int gpio7_pins[] = { 7 }; -static int gpio8_pins[] = { 8 }; -static int gpio9_pins[] = { 9 }; -static int gpio10_pins[] = { 10 }; -static int gpio11_pins[] = { 11 }; -static int gpio12_pins[] = { 12 }; -static int gpio13_pins[] = { 13 }; -static const char * const swr_tx_clk_groups[] = { "gpio0" }; -static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" }; -static const char * const swr_rx_clk_groups[] = { "gpio3" }; -static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" }; -static const char * const dmic1_clk_groups[] = { "gpio6" }; -static const char * const dmic1_data_groups[] = { "gpio7" }; -static const char * const dmic2_clk_groups[] = { "gpio8" }; -static const char * const dmic2_data_groups[] = { "gpio9" }; -static const char * const i2s2_clk_groups[] = { "gpio10" }; -static const char * const i2s2_ws_groups[] = { "gpio11" }; -static const char * const dmic3_clk_groups[] = { "gpio12" }; -static const char * const dmic3_data_groups[] = { "gpio13" }; -static const char * const qua_mi2s_sclk_groups[] = { "gpio0" }; -static const char * const qua_mi2s_ws_groups[] = { "gpio1" }; -static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" }; -static const char * const i2s1_clk_groups[] = { "gpio6" }; -static const char * const i2s1_ws_groups[] = { "gpio7" }; -static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" }; -static const char * const wsa_swr_clk_groups[] = { "gpio10" }; -static const char * const wsa_swr_data_groups[] = { "gpio11" }; -static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" }; - -static const struct lpi_pingroup sm8250_groups[] = { - LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _), - LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _), - LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _), - LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _), - LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _), - LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _), - LPI_PINGROUP(6, LPI_NO_SLEW, dmic1_clk, i2s1_clk, _, _), - LPI_PINGROUP(7, LPI_NO_SLEW, dmic1_data, i2s1_ws, _, _), - LPI_PINGROUP(8, LPI_NO_SLEW, dmic2_clk, i2s1_data, _, _), - LPI_PINGROUP(9, LPI_NO_SLEW, dmic2_data, i2s1_data, _, _), - LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _), - LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _), - LPI_PINGROUP(12, LPI_NO_SLEW, dmic3_clk, i2s2_data, _, _), - LPI_PINGROUP(13, LPI_NO_SLEW, dmic3_data, i2s2_data, _, _), -}; - -static const struct lpi_function sm8250_functions[] = { - LPI_FUNCTION(dmic1_clk), - LPI_FUNCTION(dmic1_data), - LPI_FUNCTION(dmic2_clk), - LPI_FUNCTION(dmic2_data), - LPI_FUNCTION(dmic3_clk), - LPI_FUNCTION(dmic3_data), - LPI_FUNCTION(i2s1_clk), - LPI_FUNCTION(i2s1_data), - LPI_FUNCTION(i2s1_ws), - LPI_FUNCTION(i2s2_clk), - LPI_FUNCTION(i2s2_data), - LPI_FUNCTION(i2s2_ws), - LPI_FUNCTION(qua_mi2s_data), - LPI_FUNCTION(qua_mi2s_sclk), - LPI_FUNCTION(qua_mi2s_ws), - LPI_FUNCTION(swr_rx_clk), - LPI_FUNCTION(swr_rx_data), - LPI_FUNCTION(swr_tx_clk), - LPI_FUNCTION(swr_tx_data), - LPI_FUNCTION(wsa_swr_clk), - LPI_FUNCTION(wsa_swr_data), -}; - -static struct lpi_pinctrl_variant_data sm8250_lpi_data = { - .pins = sm8250_lpi_pins, - .npins = ARRAY_SIZE(sm8250_lpi_pins), - .groups = sm8250_groups, - .ngroups = ARRAY_SIZE(sm8250_groups), - .functions = sm8250_functions, - .nfunctions = ARRAY_SIZE(sm8250_functions), -}; - static int lpi_gpio_read(struct lpi_pinctrl *state, unsigned int pin, unsigned int addr) { @@ -580,7 +374,7 @@ static const struct gpio_chip lpi_gpio_template = { .dbg_show = lpi_gpio_dbg_show, }; -static int lpi_pinctrl_probe(struct platform_device *pdev) +int lpi_pinctrl_probe(struct platform_device *pdev) { const struct lpi_pinctrl_variant_data *data; struct device *dev = &pdev->dev; @@ -659,8 +453,9 @@ static int lpi_pinctrl_probe(struct platform_device *pdev) return ret; } +EXPORT_SYMBOL_GPL(lpi_pinctrl_probe); -static int lpi_pinctrl_remove(struct platform_device *pdev) +int lpi_pinctrl_remove(struct platform_device *pdev) { struct lpi_pinctrl *pctrl = platform_get_drvdata(pdev); @@ -669,25 +464,7 @@ static int lpi_pinctrl_remove(struct platform_device *pdev) return 0; } +EXPORT_SYMBOL_GPL(lpi_pinctrl_remove); -static const struct of_device_id lpi_pinctrl_of_match[] = { - { - .compatible = "qcom,sm8250-lpass-lpi-pinctrl", - .data = &sm8250_lpi_data, - }, - { } -}; -MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match); - -static struct platform_driver lpi_pinctrl_driver = { - .driver = { - .name = "qcom-lpass-lpi-pinctrl", - .of_match_table = lpi_pinctrl_of_match, - }, - .probe = lpi_pinctrl_probe, - .remove = lpi_pinctrl_remove, -}; - -module_platform_driver(lpi_pinctrl_driver); MODULE_DESCRIPTION("QTI LPI GPIO pin control driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h new file mode 100644 index 0000000..afbac2a --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h @@ -0,0 +1,85 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020 Linaro Ltd. + */ +#ifndef __PINCTRL_LPASS_LPI_H__ +#define __PINCTRL_LPASS_LPI_H__ + +#include +#include +#include "../core.h" + +#define LPI_SLEW_RATE_CTL_REG 0xa000 +#define LPI_TLMM_REG_OFFSET 0x1000 +#define LPI_SLEW_RATE_MAX 0x03 +#define LPI_SLEW_BITS_SIZE 0x02 +#define LPI_SLEW_RATE_MASK GENMASK(1, 0) +#define LPI_GPIO_CFG_REG 0x00 +#define LPI_GPIO_PULL_MASK GENMASK(1, 0) +#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2) +#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6) +#define LPI_GPIO_OE_MASK BIT(9) +#define LPI_GPIO_VALUE_REG 0x04 +#define LPI_GPIO_VALUE_IN_MASK BIT(0) +#define LPI_GPIO_VALUE_OUT_MASK BIT(1) + +#define LPI_GPIO_BIAS_DISABLE 0x0 +#define LPI_GPIO_PULL_DOWN 0x1 +#define LPI_GPIO_KEEPER 0x2 +#define LPI_GPIO_PULL_UP 0x3 +#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1) +#define LPI_NO_SLEW -1 + +#define LPI_FUNCTION(fname) \ + [LPI_MUX_##fname] = { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + +#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \ + { \ + .group.name = "gpio" #id, \ + .group.pins = gpio##id##_pins, \ + .pin = id, \ + .slew_offset = soff, \ + .group.num_pins = ARRAY_SIZE(gpio##id##_pins), \ + .funcs = (int[]){ \ + LPI_MUX_gpio, \ + LPI_MUX_##f1, \ + LPI_MUX_##f2, \ + LPI_MUX_##f3, \ + LPI_MUX_##f4, \ + }, \ + .nfuncs = 5, \ + } + +struct lpi_pingroup { + struct group_desc group; + unsigned int pin; + /* Bit offset in slew register for SoundWire pins only */ + int slew_offset; + unsigned int *funcs; + unsigned int nfuncs; +}; + +struct lpi_function { + const char *name; + const char * const *groups; + unsigned int ngroups; +}; + +struct lpi_pinctrl_variant_data { + const struct pinctrl_pin_desc *pins; + int npins; + const struct lpi_pingroup *groups; + int ngroups; + const struct lpi_function *functions; + int nfunctions; +}; + +int lpi_pinctrl_probe(struct platform_device *pdev); +int lpi_pinctrl_remove(struct platform_device *pdev); + +#endif /*__PINCTRL_LPASS_LPI_H__*/ diff --git a/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c new file mode 100644 index 0000000..fb7dbb3 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020 Linaro Ltd. + */ + +#include +#include +#include + +#include "pinctrl-lpass-lpi.h" + +enum lpass_lpi_functions { + LPI_MUX_dmic1_clk, + LPI_MUX_dmic1_data, + LPI_MUX_dmic2_clk, + LPI_MUX_dmic2_data, + LPI_MUX_dmic3_clk, + LPI_MUX_dmic3_data, + LPI_MUX_i2s1_clk, + LPI_MUX_i2s1_data, + LPI_MUX_i2s1_ws, + LPI_MUX_i2s2_clk, + LPI_MUX_i2s2_data, + LPI_MUX_i2s2_ws, + LPI_MUX_qua_mi2s_data, + LPI_MUX_qua_mi2s_sclk, + LPI_MUX_qua_mi2s_ws, + LPI_MUX_swr_rx_clk, + LPI_MUX_swr_rx_data, + LPI_MUX_swr_tx_clk, + LPI_MUX_swr_tx_data, + LPI_MUX_wsa_swr_clk, + LPI_MUX_wsa_swr_data, + LPI_MUX_gpio, + LPI_MUX__, +}; + +static int gpio0_pins[] = { 0 }; +static int gpio1_pins[] = { 1 }; +static int gpio2_pins[] = { 2 }; +static int gpio3_pins[] = { 3 }; +static int gpio4_pins[] = { 4 }; +static int gpio5_pins[] = { 5 }; +static int gpio6_pins[] = { 6 }; +static int gpio7_pins[] = { 7 }; +static int gpio8_pins[] = { 8 }; +static int gpio9_pins[] = { 9 }; +static int gpio10_pins[] = { 10 }; +static int gpio11_pins[] = { 11 }; +static int gpio12_pins[] = { 12 }; +static int gpio13_pins[] = { 13 }; + + +/* sm8250 variant specific data */ +static const struct pinctrl_pin_desc sm8250_lpi_pins[] = { + PINCTRL_PIN(0, "gpio0"), + PINCTRL_PIN(1, "gpio1"), + PINCTRL_PIN(2, "gpio2"), + PINCTRL_PIN(3, "gpio3"), + PINCTRL_PIN(4, "gpio4"), + PINCTRL_PIN(5, "gpio5"), + PINCTRL_PIN(6, "gpio6"), + PINCTRL_PIN(7, "gpio7"), + PINCTRL_PIN(8, "gpio8"), + PINCTRL_PIN(9, "gpio9"), + PINCTRL_PIN(10, "gpio10"), + PINCTRL_PIN(11, "gpio11"), + PINCTRL_PIN(12, "gpio12"), + PINCTRL_PIN(13, "gpio13"), +}; + +static const char * const swr_tx_clk_groups[] = { "gpio0" }; +static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" }; +static const char * const swr_rx_clk_groups[] = { "gpio3" }; +static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" }; +static const char * const dmic1_clk_groups[] = { "gpio6" }; +static const char * const dmic1_data_groups[] = { "gpio7" }; +static const char * const dmic2_clk_groups[] = { "gpio8" }; +static const char * const dmic2_data_groups[] = { "gpio9" }; +static const char * const i2s2_clk_groups[] = { "gpio10" }; +static const char * const i2s2_ws_groups[] = { "gpio11" }; +static const char * const dmic3_clk_groups[] = { "gpio12" }; +static const char * const dmic3_data_groups[] = { "gpio13" }; +static const char * const qua_mi2s_sclk_groups[] = { "gpio0" }; +static const char * const qua_mi2s_ws_groups[] = { "gpio1" }; +static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" }; +static const char * const i2s1_clk_groups[] = { "gpio6" }; +static const char * const i2s1_ws_groups[] = { "gpio7" }; +static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" }; +static const char * const wsa_swr_clk_groups[] = { "gpio10" }; +static const char * const wsa_swr_data_groups[] = { "gpio11" }; +static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" }; + +static const struct lpi_pingroup sm8250_groups[] = { + LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _), + LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _), + LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _), + LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _), + LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _), + LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _), + LPI_PINGROUP(6, LPI_NO_SLEW, dmic1_clk, i2s1_clk, _, _), + LPI_PINGROUP(7, LPI_NO_SLEW, dmic1_data, i2s1_ws, _, _), + LPI_PINGROUP(8, LPI_NO_SLEW, dmic2_clk, i2s1_data, _, _), + LPI_PINGROUP(9, LPI_NO_SLEW, dmic2_data, i2s1_data, _, _), + LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _), + LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _), + LPI_PINGROUP(12, LPI_NO_SLEW, dmic3_clk, i2s2_data, _, _), + LPI_PINGROUP(13, LPI_NO_SLEW, dmic3_data, i2s2_data, _, _), +}; + +static const struct lpi_function sm8250_functions[] = { + LPI_FUNCTION(dmic1_clk), + LPI_FUNCTION(dmic1_data), + LPI_FUNCTION(dmic2_clk), + LPI_FUNCTION(dmic2_data), + LPI_FUNCTION(dmic3_clk), + LPI_FUNCTION(dmic3_data), + LPI_FUNCTION(i2s1_clk), + LPI_FUNCTION(i2s1_data), + LPI_FUNCTION(i2s1_ws), + LPI_FUNCTION(i2s2_clk), + LPI_FUNCTION(i2s2_data), + LPI_FUNCTION(i2s2_ws), + LPI_FUNCTION(qua_mi2s_data), + LPI_FUNCTION(qua_mi2s_sclk), + LPI_FUNCTION(qua_mi2s_ws), + LPI_FUNCTION(swr_rx_clk), + LPI_FUNCTION(swr_rx_data), + LPI_FUNCTION(swr_tx_clk), + LPI_FUNCTION(swr_tx_data), + LPI_FUNCTION(wsa_swr_clk), + LPI_FUNCTION(wsa_swr_data), +}; + +static const struct lpi_pinctrl_variant_data sm8250_lpi_data = { + .pins = sm8250_lpi_pins, + .npins = ARRAY_SIZE(sm8250_lpi_pins), + .groups = sm8250_groups, + .ngroups = ARRAY_SIZE(sm8250_groups), + .functions = sm8250_functions, + .nfunctions = ARRAY_SIZE(sm8250_functions), +}; + +static const struct of_device_id lpi_pinctrl_of_match[] = { + { + .compatible = "qcom,sm8250-lpass-lpi-pinctrl", + .data = &sm8250_lpi_data, + }, + { } +}; +MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match); + +static struct platform_driver lpi_pinctrl_driver = { + .driver = { + .name = "qcom-sm8250-lpass-lpi-pinctrl", + .of_match_table = lpi_pinctrl_of_match, + }, + .probe = lpi_pinctrl_probe, + .remove = lpi_pinctrl_remove, +}; + +module_platform_driver(lpi_pinctrl_driver); +MODULE_DESCRIPTION("QTI SM8250 LPI GPIO pin control driver"); +MODULE_LICENSE("GPL"); From patchwork Wed Feb 23 07:55:31 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Srinivasa Rao Mandadapu X-Patchwork-Id: 545245 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 3DB73C433F5 for ; Wed, 23 Feb 2022 07:58:49 +0000 (UTC) Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id 7F6261A48; Wed, 23 Feb 2022 08:57:57 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz 7F6261A48 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1645603127; bh=OUChwAg0I2nxf43+iAguxjcqrAH2DIVfxdOTqzRmIoY=; h=From:To:Subject:Date:In-Reply-To:References:Cc:List-Id: List-Unsubscribe:List-Archive:List-Post:List-Help:List-Subscribe: From; b=mLDWSubfi8InRhrjklJIk1ucVUBgPTS8BnApR2booVFzL/5AGl4v7O/WfV3SCpMV0 p20I44udt3uTI29b2Iz03bt0CQONFKudnIU0xBPuZrtYgkiCnN/3/7Okx/zBUUVoup 4o+zWm9YAWxYaOwUvOKSek0MszREBdDti0pmmj2A= Received: from alsa1.perex.cz (localhost.localdomain [127.0.0.1]) by alsa1.perex.cz (Postfix) with ESMTP id 0149BF8052F; Wed, 23 Feb 2022 08:56:35 +0100 (CET) Received: by alsa1.perex.cz (Postfix, from userid 50401) id CA467F80527; Wed, 23 Feb 2022 08:56:32 +0100 (CET) Received: from alexa-out-sd-01.qualcomm.com (alexa-out-sd-01.qualcomm.com [199.106.114.38]) (using TLSv1.2 with cipher AES256-SHA (256/256 bits)) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id 7B37EF8052E for ; Wed, 23 Feb 2022 08:56:29 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz 7B37EF8052E Authentication-Results: alsa1.perex.cz; dkim=pass (1024-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="oL7jSBmZ" DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; i=@quicinc.com; q=dns/txt; s=qcdkim; t=1645602990; x=1677138990; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version; bh=y/U87l7D1RzocJCxRatXqrgdRhMA/WxpDQojnuIjKQQ=; b=oL7jSBmZEB3v62F8MPYRb1IWtqf2sah90bZg4HrC4rNZm8q+sQ88aX1l W8oEmO1qZ9/VpEEzeuNPrjuSY0OD2BscdnfsGemo8EYwKtl7XwL0Ww9QG tBZ9XpicDxV96R6/Q4qyYzQ1XumrH7jpPYxQURKC+sCzAnJQv8/qK09my Q=; Received: from unknown (HELO ironmsg01-sd.qualcomm.com) ([10.53.140.141]) by alexa-out-sd-01.qualcomm.com with ESMTP; 22 Feb 2022 23:56:27 -0800 X-QCInternal: smtphost Received: from nasanex01c.na.qualcomm.com ([10.47.97.222]) by ironmsg01-sd.qualcomm.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 22 Feb 2022 23:56:25 -0800 Received: from nalasex01a.na.qualcomm.com (10.47.209.196) by nasanex01c.na.qualcomm.com (10.47.97.222) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Tue, 22 Feb 2022 23:56:25 -0800 Received: from hu-srivasam-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Tue, 22 Feb 2022 23:56:19 -0800 From: Srinivasa Rao Mandadapu To: , , , , , , , , , , , , , , , , , Linus Walleij , Subject: [PATCH v9 6/7] pinctrl: qcom: Add SC7280 lpass pin configuration Date: Wed, 23 Feb 2022 13:25:31 +0530 Message-ID: <1645602932-6659-7-git-send-email-quic_srivasam@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1645602932-6659-1-git-send-email-quic_srivasam@quicinc.com> References: <1645602932-6659-1-git-send-email-quic_srivasam@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) Cc: Venkata Prasad Potturu , Srinivasa Rao Mandadapu X-BeenThere: alsa-devel@alsa-project.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: "Alsa-devel" Add pin control support for SC7280 LPASS LPI. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu --- drivers/pinctrl/qcom/Kconfig | 8 ++ drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c | 167 ++++++++++++++++++++++++ 3 files changed, 176 insertions(+) create mode 100644 drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig index dc6716e..6e92202 100644 --- a/drivers/pinctrl/qcom/Kconfig +++ b/drivers/pinctrl/qcom/Kconfig @@ -239,6 +239,14 @@ config PINCTRL_SC7280 Qualcomm Technologies Inc TLMM block found on the Qualcomm Technologies Inc SC7280 platform. +config PINCTRL_SC7280_LPASS_LPI + tristate "Qualcomm Technologies Inc SC7280 LPASS LPI pin controller driver" + select PINCTRL_LPASS_LPI + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI + (Low Power Island) found on the Qualcomm Technologies Inc SC7280 platform. + config PINCTRL_SC8180X tristate "Qualcomm Technologies Inc SC8180x pin controller driver" depends on (OF || ACPI) diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile index 39650d6..573e741 100644 --- a/drivers/pinctrl/qcom/Makefile +++ b/drivers/pinctrl/qcom/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-mpp.o obj-$(CONFIG_PINCTRL_SC7180) += pinctrl-sc7180.o obj-$(CONFIG_PINCTRL_SC7280) += pinctrl-sc7280.o +obj-$(CONFIG_PINCTRL_SC7280_LPASS_LPI) += pinctrl-sc7280-lpass-lpi.o obj-$(CONFIG_PINCTRL_SC8180X) += pinctrl-sc8180x.o obj-$(CONFIG_PINCTRL_SDM660) += pinctrl-sdm660.o obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o diff --git a/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c new file mode 100644 index 0000000..d67ff25 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c @@ -0,0 +1,167 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. + * ALSA SoC platform-machine driver for QTi LPASS + */ + +#include +#include +#include + +#include "pinctrl-lpass-lpi.h" + +enum lpass_lpi_functions { + LPI_MUX_dmic1_clk, + LPI_MUX_dmic1_data, + LPI_MUX_dmic2_clk, + LPI_MUX_dmic2_data, + LPI_MUX_dmic3_clk, + LPI_MUX_dmic3_data, + LPI_MUX_i2s1_clk, + LPI_MUX_i2s1_data, + LPI_MUX_i2s1_ws, + LPI_MUX_i2s2_clk, + LPI_MUX_i2s2_data, + LPI_MUX_i2s2_ws, + LPI_MUX_qua_mi2s_data, + LPI_MUX_qua_mi2s_sclk, + LPI_MUX_qua_mi2s_ws, + LPI_MUX_swr_rx_clk, + LPI_MUX_swr_rx_data, + LPI_MUX_swr_tx_clk, + LPI_MUX_swr_tx_data, + LPI_MUX_wsa_swr_clk, + LPI_MUX_wsa_swr_data, + LPI_MUX_gpio, + LPI_MUX__, +}; + +static int gpio0_pins[] = { 0 }; +static int gpio1_pins[] = { 1 }; +static int gpio2_pins[] = { 2 }; +static int gpio3_pins[] = { 3 }; +static int gpio4_pins[] = { 4 }; +static int gpio5_pins[] = { 5 }; +static int gpio6_pins[] = { 6 }; +static int gpio7_pins[] = { 7 }; +static int gpio8_pins[] = { 8 }; +static int gpio9_pins[] = { 9 }; +static int gpio10_pins[] = { 10 }; +static int gpio11_pins[] = { 11 }; +static int gpio12_pins[] = { 12 }; +static int gpio13_pins[] = { 13 }; +static int gpio14_pins[] = { 14 }; + +/* sc7280 variant specific data */ +static const struct pinctrl_pin_desc sc7280_lpi_pins[] = { + PINCTRL_PIN(0, "gpio0"), + PINCTRL_PIN(1, "gpio1"), + PINCTRL_PIN(2, "gpio2"), + PINCTRL_PIN(3, "gpio3"), + PINCTRL_PIN(4, "gpio4"), + PINCTRL_PIN(5, "gpio5"), + PINCTRL_PIN(6, "gpio6"), + PINCTRL_PIN(7, "gpio7"), + PINCTRL_PIN(8, "gpio8"), + PINCTRL_PIN(9, "gpio9"), + PINCTRL_PIN(10, "gpio10"), + PINCTRL_PIN(11, "gpio11"), + PINCTRL_PIN(12, "gpio12"), + PINCTRL_PIN(13, "gpio13"), + PINCTRL_PIN(14, "gpio14"), +}; + +static const char * const swr_tx_clk_groups[] = { "gpio0" }; +static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio14" }; +static const char * const swr_rx_clk_groups[] = { "gpio3" }; +static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" }; +static const char * const dmic1_clk_groups[] = { "gpio6" }; +static const char * const dmic1_data_groups[] = { "gpio7" }; +static const char * const dmic2_clk_groups[] = { "gpio8" }; +static const char * const dmic2_data_groups[] = { "gpio9" }; +static const char * const i2s2_clk_groups[] = { "gpio10" }; +static const char * const i2s2_ws_groups[] = { "gpio11" }; +static const char * const dmic3_clk_groups[] = { "gpio12" }; +static const char * const dmic3_data_groups[] = { "gpio13" }; +static const char * const qua_mi2s_sclk_groups[] = { "gpio0" }; +static const char * const qua_mi2s_ws_groups[] = { "gpio1" }; +static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" }; +static const char * const i2s1_clk_groups[] = { "gpio6" }; +static const char * const i2s1_ws_groups[] = { "gpio7" }; +static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" }; +static const char * const wsa_swr_clk_groups[] = { "gpio10" }; +static const char * const wsa_swr_data_groups[] = { "gpio11" }; +static const char * const i2s2_data_groups[] = { "gpio12", "gpio13" }; + +static const struct lpi_pingroup sc7280_groups[] = { + LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _), + LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _), + LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _), + LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _), + LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _), + LPI_PINGROUP(5, 12, swr_rx_data, _, _, _), + LPI_PINGROUP(6, LPI_NO_SLEW, dmic1_clk, i2s1_clk, _, _), + LPI_PINGROUP(7, LPI_NO_SLEW, dmic1_data, i2s1_ws, _, _), + LPI_PINGROUP(8, LPI_NO_SLEW, dmic2_clk, i2s1_data, _, _), + LPI_PINGROUP(9, LPI_NO_SLEW, dmic2_data, i2s1_data, _, _), + LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _), + LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _), + LPI_PINGROUP(12, LPI_NO_SLEW, dmic3_clk, i2s2_data, _, _), + LPI_PINGROUP(13, LPI_NO_SLEW, dmic3_data, i2s2_data, _, _), + LPI_PINGROUP(14, 6, swr_tx_data, _, _, _), +}; + +static const struct lpi_function sc7280_functions[] = { + LPI_FUNCTION(dmic1_clk), + LPI_FUNCTION(dmic1_data), + LPI_FUNCTION(dmic2_clk), + LPI_FUNCTION(dmic2_data), + LPI_FUNCTION(dmic3_clk), + LPI_FUNCTION(dmic3_data), + LPI_FUNCTION(i2s1_clk), + LPI_FUNCTION(i2s1_data), + LPI_FUNCTION(i2s1_ws), + LPI_FUNCTION(i2s2_clk), + LPI_FUNCTION(i2s2_data), + LPI_FUNCTION(i2s2_ws), + LPI_FUNCTION(qua_mi2s_data), + LPI_FUNCTION(qua_mi2s_sclk), + LPI_FUNCTION(qua_mi2s_ws), + LPI_FUNCTION(swr_rx_clk), + LPI_FUNCTION(swr_rx_data), + LPI_FUNCTION(swr_tx_clk), + LPI_FUNCTION(swr_tx_data), + LPI_FUNCTION(wsa_swr_clk), + LPI_FUNCTION(wsa_swr_data), +}; + +static const struct lpi_pinctrl_variant_data sc7280_lpi_data = { + .pins = sc7280_lpi_pins, + .npins = ARRAY_SIZE(sc7280_lpi_pins), + .groups = sc7280_groups, + .ngroups = ARRAY_SIZE(sc7280_groups), + .functions = sc7280_functions, + .nfunctions = ARRAY_SIZE(sc7280_functions), +}; + +static const struct of_device_id lpi_pinctrl_of_match[] = { + { + .compatible = "qcom,sc7280-lpass-lpi-pinctrl", + .data = &sc7280_lpi_data, + }, + { } +}; +MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match); + +static struct platform_driver lpi_pinctrl_driver = { + .driver = { + .name = "qcom-sc7280-lpass-lpi-pinctrl", + .of_match_table = lpi_pinctrl_of_match, + }, + .probe = lpi_pinctrl_probe, + .remove = lpi_pinctrl_remove, +}; + +module_platform_driver(lpi_pinctrl_driver); +MODULE_DESCRIPTION("QTI SC7280 LPI GPIO pin control driver"); +MODULE_LICENSE("GPL"); From patchwork Wed Feb 23 07:55:32 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Srinivasa Rao Mandadapu X-Patchwork-Id: 545627 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id D9BA7C433F5 for ; Wed, 23 Feb 2022 07:59:15 +0000 (UTC) Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id 1589F1AB5; Wed, 23 Feb 2022 08:58:24 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz 1589F1AB5 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1645603154; bh=LcpmTmCTYtCcvNzkq4geoDZvsuePiP7uz7NBz/vvWgY=; h=From:To:Subject:Date:In-Reply-To:References:Cc:List-Id: List-Unsubscribe:List-Archive:List-Post:List-Help:List-Subscribe: From; b=vSRX78iTJRIsHM4Yzd5u95os0wi7t2lpMJva/x4JHL1nGCnnItbzzJ3YYQ/veIZIW 8rok2cUtvWnfgUPxdQO/oXWPvjZImmkPKtBoN5HNMHKQjJPlaI3PIwk8+B2XWBAu3r i3/TRfSuatzygEyyQ54JFN/T2teHCgvdfJ3tgRn4= Received: from alsa1.perex.cz (localhost.localdomain [127.0.0.1]) by alsa1.perex.cz (Postfix) with ESMTP id 01582F8053B; Wed, 23 Feb 2022 08:56:39 +0100 (CET) Received: by alsa1.perex.cz (Postfix, from userid 50401) id A9AB6F8053B; Wed, 23 Feb 2022 08:56:37 +0100 (CET) Received: from alexa-out.qualcomm.com (alexa-out.qualcomm.com [129.46.98.28]) (using TLSv1.2 with cipher AES256-SHA (256/256 bits)) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id E2881F80538 for ; Wed, 23 Feb 2022 08:56:34 +0100 (CET) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz E2881F80538 Authentication-Results: alsa1.perex.cz; dkim=pass (1024-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="LXzuEn/Z" DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; i=@quicinc.com; q=dns/txt; s=qcdkim; t=1645602996; x=1677138996; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version; bh=E08tgNQeQ9Ef3DLQks66FyP1PMu959mkmFifh3k8TxU=; b=LXzuEn/ZkDGcjsu8wWjFZcVyHA2T6G0WkRBubzLSfyLtfPREMbutY6Mt TmGtLzYUfFIUtFoEZXYapnlAQcP3edjMBjcCD5H2NjPXGteIkW/blXOLI CyaQPUcelW+HJIc+Q2+cUDmwZEpeI9RitsfDYsyzfowkSyDBu4ZPzylyD w=; Received: from ironmsg09-lv.qualcomm.com ([10.47.202.153]) by alexa-out.qualcomm.com with ESMTP; 22 Feb 2022 23:56:33 -0800 X-QCInternal: smtphost Received: from nasanex01c.na.qualcomm.com ([10.47.97.222]) by ironmsg09-lv.qualcomm.com with ESMTP/TLS/ECDHE-RSA-AES256-GCM-SHA384; 22 Feb 2022 23:56:32 -0800 Received: from nalasex01a.na.qualcomm.com (10.47.209.196) by nasanex01c.na.qualcomm.com (10.47.97.222) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Tue, 22 Feb 2022 23:56:31 -0800 Received: from hu-srivasam-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.15; Tue, 22 Feb 2022 23:56:25 -0800 From: Srinivasa Rao Mandadapu To: , , , , , , , , , , , , , , , , , Linus Walleij , Subject: [PATCH v9 7/7] pinctrl: qcom: Update clock voting as optional Date: Wed, 23 Feb 2022 13:25:32 +0530 Message-ID: <1645602932-6659-8-git-send-email-quic_srivasam@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1645602932-6659-1-git-send-email-quic_srivasam@quicinc.com> References: <1645602932-6659-1-git-send-email-quic_srivasam@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) Cc: Venkata Prasad Potturu , Srinivasa Rao Mandadapu X-BeenThere: alsa-devel@alsa-project.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: "Alsa-devel" Update bulk clock voting to optional voting as ADSP bypass platform doesn't need macro and decodec clocks, these are maintained as power domains and operated from lpass audio core cc. Signed-off-by: Srinivasa Rao Mandadapu Co-developed-by: Venkata Prasad Potturu Signed-off-by: Venkata Prasad Potturu --- drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 12 +++++++++--- drivers/pinctrl/qcom/pinctrl-lpass-lpi.h | 1 + drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c | 1 + 3 files changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c index 1ab572f..c618b74 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c @@ -407,9 +407,15 @@ int lpi_pinctrl_probe(struct platform_device *pdev) return dev_err_probe(dev, PTR_ERR(pctrl->slew_base), "Slew resource not provided\n"); - ret = devm_clk_bulk_get(dev, MAX_LPI_NUM_CLKS, pctrl->clks); - if (ret) - return dev_err_probe(dev, ret, "Can't get clocks\n"); + if (data->is_clk_optional) { + ret = devm_clk_bulk_get_optional(dev, MAX_LPI_NUM_CLKS, pctrl->clks); + if (ret) + return dev_err_probe(dev, ret, "Can't get clocks\n"); + } else { + ret = devm_clk_bulk_get(dev, MAX_LPI_NUM_CLKS, pctrl->clks); + if (ret) + return dev_err_probe(dev, ret, "Can't get clocks\n"); + } ret = clk_bulk_prepare_enable(MAX_LPI_NUM_CLKS, pctrl->clks); if (ret) diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h index afbac2a..3bcede6 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h @@ -77,6 +77,7 @@ struct lpi_pinctrl_variant_data { int ngroups; const struct lpi_function *functions; int nfunctions; + int is_clk_optional; }; int lpi_pinctrl_probe(struct platform_device *pdev); diff --git a/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c index d67ff25..304d8a2 100644 --- a/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c +++ b/drivers/pinctrl/qcom/pinctrl-sc7280-lpass-lpi.c @@ -142,6 +142,7 @@ static const struct lpi_pinctrl_variant_data sc7280_lpi_data = { .ngroups = ARRAY_SIZE(sc7280_groups), .functions = sc7280_functions, .nfunctions = ARRAY_SIZE(sc7280_functions), + .is_clk_optional = 1, }; static const struct of_device_id lpi_pinctrl_of_match[] = {