From patchwork Mon May 9 17:56:06 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?C=C3=A9dric_Le_Goater?= X-Patchwork-Id: 572013 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 58846C433F5 for ; Mon, 9 May 2022 17:56:43 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239871AbiEISAe (ORCPT ); Mon, 9 May 2022 14:00:34 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47832 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239866AbiEISAd (ORCPT ); Mon, 9 May 2022 14:00:33 -0400 Received: from gandalf.ozlabs.org (mail.ozlabs.org [IPv6:2404:9400:2221:ea00::3]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B86AC54035; Mon, 9 May 2022 10:56:38 -0700 (PDT) Received: from gandalf.ozlabs.org (gandalf.ozlabs.org [150.107.74.76]) by gandalf.ozlabs.org (Postfix) with ESMTP id 4Kxpl92yNNz4xdK; Tue, 10 May 2022 03:56:37 +1000 (AEST) Received: from authenticated.ozlabs.org (localhost [127.0.0.1]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by mail.ozlabs.org (Postfix) with ESMTPSA id 4Kxpl40c0lz4xVP; Tue, 10 May 2022 03:56:31 +1000 (AEST) From: =?utf-8?q?C=C3=A9dric_Le_Goater?= To: linux-spi@vger.kernel.org, linux-mtd@lists.infradead.org Cc: Mark Brown , Tudor Ambarus , Pratyush Yadav , Miquel Raynal , Richard Weinberger , Vignesh Raghavendra , linux-aspeed@lists.ozlabs.org, Joel Stanley , Andrew Jeffery , Chin-Ting Kuo , devicetree@vger.kernel.org, Rob Herring , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, =?utf-8?q?C=C3=A9dric_Le_Goater?= , Tao Ren , Jae Hyun Yoo Subject: [PATCH v7 01/11] ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllers Date: Mon, 9 May 2022 19:56:06 +0200 Message-Id: <20220509175616.1089346-2-clg@kaod.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220509175616.1089346-1-clg@kaod.org> References: <20220509175616.1089346-1-clg@kaod.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org This is compatible with the current driver and addresses issues when running 'make dt_binding_check'. Cc: Chin-Ting Kuo Tested-by: Joel Stanley Tested-by: Tao Ren Tested-by: Jae Hyun Yoo Signed-off-by: Cédric Le Goater --- arch/arm/boot/dts/aspeed-g4.dtsi | 6 ++---- arch/arm/boot/dts/aspeed-g5.dtsi | 9 +++------ arch/arm/boot/dts/aspeed-g6.dtsi | 9 +++------ 3 files changed, 8 insertions(+), 16 deletions(-) diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index fa8b581c3d6c..3b7b98e787e7 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -54,8 +54,7 @@ ahb { ranges; fmc: spi@1e620000 { - reg = < 0x1e620000 0x94 - 0x20000000 0x10000000 >; + reg = <0x1e620000 0x94>, <0x20000000 0x10000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2400-fmc"; @@ -91,8 +90,7 @@ flash@4 { }; spi: spi@1e630000 { - reg = < 0x1e630000 0x18 - 0x30000000 0x10000000 >; + reg = <0x1e630000 0x18>, <0x30000000 0x10000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2400-spi"; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index 4147b397c883..1e727cbaab14 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -55,8 +55,7 @@ ahb { ranges; fmc: spi@1e620000 { - reg = < 0x1e620000 0xc4 - 0x20000000 0x10000000 >; + reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2500-fmc"; @@ -84,8 +83,7 @@ flash@2 { }; spi1: spi@1e630000 { - reg = < 0x1e630000 0xc4 - 0x30000000 0x08000000 >; + reg = <0x1e630000 0xc4>, <0x30000000 0x08000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2500-spi"; @@ -106,8 +104,7 @@ flash@1 { }; spi2: spi@1e631000 { - reg = < 0x1e631000 0xc4 - 0x38000000 0x08000000 >; + reg = <0x1e631000 0xc4>, <0x38000000 0x08000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2500-spi"; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 3d5ce9da42c3..6ae5dfecbdf1 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -95,8 +95,7 @@ gic: interrupt-controller@40461000 { }; fmc: spi@1e620000 { - reg = < 0x1e620000 0xc4 - 0x20000000 0x10000000 >; + reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2600-fmc"; @@ -124,8 +123,7 @@ flash@2 { }; spi1: spi@1e630000 { - reg = < 0x1e630000 0xc4 - 0x30000000 0x10000000 >; + reg = <0x1e630000 0xc4>, <0x30000000 0x10000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2600-spi"; @@ -146,8 +144,7 @@ flash@1 { }; spi2: spi@1e631000 { - reg = < 0x1e631000 0xc4 - 0x50000000 0x10000000 >; + reg = <0x1e631000 0xc4>, <0x50000000 0x10000000>; #address-cells = <1>; #size-cells = <0>; compatible = "aspeed,ast2600-spi"; From patchwork Mon May 9 17:56:07 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?C=C3=A9dric_Le_Goater?= X-Patchwork-Id: 571186 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 1A876C433EF for ; Mon, 9 May 2022 17:56:57 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239850AbiEISAs (ORCPT ); Mon, 9 May 2022 14:00:48 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48310 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239866AbiEISAk (ORCPT ); Mon, 9 May 2022 14:00:40 -0400 Received: from gandalf.ozlabs.org (gandalf.ozlabs.org [150.107.74.76]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 330A25DE7D; Mon, 9 May 2022 10:56:44 -0700 (PDT) Received: from gandalf.ozlabs.org (mail.ozlabs.org [IPv6:2404:9400:2221:ea00::3]) by gandalf.ozlabs.org (Postfix) with ESMTP id 4KxplH3cT2z4ySZ; Tue, 10 May 2022 03:56:43 +1000 (AEST) Received: from authenticated.ozlabs.org (localhost [127.0.0.1]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by mail.ozlabs.org (Postfix) with ESMTPSA id 4Kxpl96Yrdz4xVP; Tue, 10 May 2022 03:56:37 +1000 (AEST) From: =?utf-8?q?C=C3=A9dric_Le_Goater?= To: linux-spi@vger.kernel.org, linux-mtd@lists.infradead.org Cc: Mark Brown , Tudor Ambarus , Pratyush Yadav , Miquel Raynal , Richard Weinberger , Vignesh Raghavendra , linux-aspeed@lists.ozlabs.org, Joel Stanley , Andrew Jeffery , Chin-Ting Kuo , devicetree@vger.kernel.org, Rob Herring , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, =?utf-8?q?C=C3=A9dric_Le_Goater?= , Tao Ren , Jae Hyun Yoo , Rob Herring Subject: [PATCH v7 02/11] dt-bindings: spi: Convert the Aspeed SMC controllers device tree binding Date: Mon, 9 May 2022 19:56:07 +0200 Message-Id: <20220509175616.1089346-3-clg@kaod.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220509175616.1089346-1-clg@kaod.org> References: <20220509175616.1089346-1-clg@kaod.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org The "interrupt" property is optional because it is only necessary for controllers supporting DMAs (Not implemented yet in the new driver). Cc: Chin-Ting Kuo Tested-by: Joel Stanley Tested-by: Tao Ren Tested-by: Jae Hyun Yoo Reviewed-by: Joel Stanley Reviewed-by: Rob Herring Signed-off-by: Cédric Le Goater --- .../devicetree/bindings/mtd/aspeed-smc.txt | 51 ------------ .../bindings/spi/aspeed,ast2600-fmc.yaml | 82 +++++++++++++++++++ MAINTAINERS | 9 ++ 3 files changed, 91 insertions(+), 51 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mtd/aspeed-smc.txt create mode 100644 Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml diff --git a/Documentation/devicetree/bindings/mtd/aspeed-smc.txt b/Documentation/devicetree/bindings/mtd/aspeed-smc.txt deleted file mode 100644 index 49f6528ef547..000000000000 --- a/Documentation/devicetree/bindings/mtd/aspeed-smc.txt +++ /dev/null @@ -1,51 +0,0 @@ -* Aspeed Firmware Memory controller -* Aspeed SPI Flash Memory Controller - -The Firmware Memory Controller in the Aspeed AST2500 SoC supports -three chip selects, two of which are always of SPI type and the third -can be SPI or NOR type flash. These bindings only describe SPI. - -The two SPI flash memory controllers in the AST2500 each support two -chip selects. - -Required properties: - - compatible : Should be one of - "aspeed,ast2400-fmc" for the AST2400 Firmware Memory Controller - "aspeed,ast2400-spi" for the AST2400 SPI Flash memory Controller - "aspeed,ast2500-fmc" for the AST2500 Firmware Memory Controller - "aspeed,ast2500-spi" for the AST2500 SPI flash memory controllers - - - reg : the first contains the control register location and length, - the second contains the memory window mapping address and length - - #address-cells : must be 1 corresponding to chip select child binding - - #size-cells : must be 0 corresponding to chip select child binding - -Optional properties: - - interrupts : Should contain the interrupt for the dma device if an - FMC - -The child nodes are the SPI flash modules which must have a compatible -property as specified in bindings/mtd/jedec,spi-nor.txt - -Optionally, the child node can contain properties for SPI mode (may be -ignored): - - spi-max-frequency - max frequency of spi bus - - -Example: -fmc: fmc@1e620000 { - compatible = "aspeed,ast2500-fmc"; - reg = < 0x1e620000 0x94 - 0x20000000 0x02000000 >; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <19>; - flash@0 { - reg = < 0 >; - compatible = "jedec,spi-nor"; - /* spi-max-frequency = <>; */ - /* m25p,fast-read; */ - #address-cells = <1>; - #size-cells = <1>; - }; -}; diff --git a/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml new file mode 100644 index 000000000000..fa8f4ac20985 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/aspeed,ast2600-fmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed SMC controllers bindings + +maintainers: + - Chin-Ting Kuo + - Cédric Le Goater + +description: | + This binding describes the Aspeed Static Memory Controllers (FMC and + SPI) of the AST2400, AST2500 and AST2600 SOCs. + +allOf: + - $ref: "spi-controller.yaml#" + +properties: + compatible: + enum: + - aspeed,ast2600-fmc + - aspeed,ast2600-spi + - aspeed,ast2500-fmc + - aspeed,ast2500-spi + - aspeed,ast2400-fmc + - aspeed,ast2400-spi + + reg: + items: + - description: registers + - description: memory mapping + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + + spi@1e620000 { + reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "aspeed,ast2600-fmc"; + clocks = <&syscon ASPEED_CLK_AHB>; + interrupts = ; + + flash@0 { + reg = < 0 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; + }; + + flash@1 { + reg = < 1 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; + }; + + flash@2 { + reg = < 2 >; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 9d47c5e7c6ae..149e84d32293 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3101,6 +3101,15 @@ S: Maintained F: Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml F: drivers/mmc/host/sdhci-of-aspeed* +ASPEED SMC SPI DRIVER +M: Chin-Ting Kuo +M: Cédric Le Goater +L: linux-aspeed@lists.ozlabs.org (moderated for non-subscribers) +L: openbmc@lists.ozlabs.org (moderated for non-subscribers) +L: linux-spi@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml + ASPEED VIDEO ENGINE DRIVER M: Eddie James L: linux-media@vger.kernel.org From patchwork Mon May 9 17:56:08 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?C=C3=A9dric_Le_Goater?= X-Patchwork-Id: 572012 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id EA1DDC433EF for ; Mon, 9 May 2022 17:57:00 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239897AbiEISAv (ORCPT ); Mon, 9 May 2022 14:00:51 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48888 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239866AbiEISAu (ORCPT ); Mon, 9 May 2022 14:00:50 -0400 Received: from gandalf.ozlabs.org (mail.ozlabs.org [IPv6:2404:9400:2221:ea00::3]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 2843D54697; Mon, 9 May 2022 10:56:51 -0700 (PDT) Received: from gandalf.ozlabs.org (mail.ozlabs.org [IPv6:2404:9400:2221:ea00::3]) by gandalf.ozlabs.org (Postfix) with ESMTP id 4KxplP6BMsz4xdK; Tue, 10 May 2022 03:56:49 +1000 (AEST) Received: from authenticated.ozlabs.org (localhost [127.0.0.1]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by mail.ozlabs.org (Postfix) with ESMTPSA id 4KxplJ0G8vz4xVP; Tue, 10 May 2022 03:56:43 +1000 (AEST) From: =?utf-8?q?C=C3=A9dric_Le_Goater?= To: linux-spi@vger.kernel.org, linux-mtd@lists.infradead.org Cc: Mark Brown , Tudor Ambarus , Pratyush Yadav , Miquel Raynal , Richard Weinberger , Vignesh Raghavendra , linux-aspeed@lists.ozlabs.org, Joel Stanley , Andrew Jeffery , Chin-Ting Kuo , devicetree@vger.kernel.org, Rob Herring , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, =?utf-8?q?C=C3=A9dric_Le_Goater?= , Tao Ren , Jae Hyun Yoo Subject: [PATCH v7 03/11] spi: spi-mem: Convert Aspeed SMC driver to spi-mem Date: Mon, 9 May 2022 19:56:08 +0200 Message-Id: <20220509175616.1089346-4-clg@kaod.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220509175616.1089346-1-clg@kaod.org> References: <20220509175616.1089346-1-clg@kaod.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org This SPI driver adds support for the Aspeed static memory controllers of the AST2600, AST2500 and AST2400 SoCs using the spi-mem interface. * AST2600 Firmware SPI Memory Controller (FMC) . BMC firmware . 3 chip select pins (CE0 ~ CE2) . Only supports SPI type flash memory . different segment register interface . single, dual and quad mode. * AST2600 SPI Flash Controller (SPI1 and SPI2) . host firmware . 2 chip select pins (CE0 ~ CE1) . different segment register interface . single, dual and quad mode. * AST2500 Firmware SPI Memory Controller (FMC) . BMC firmware . 3 chip select pins (CE0 ~ CE2) . supports SPI type flash memory (CE0-CE1) . CE2 can be of NOR type flash but this is not supported by the driver . single, dual mode. * AST2500 SPI Flash Controller (SPI1 and SPI2) . host firmware . 2 chip select pins (CE0 ~ CE1) . single, dual mode. * AST2400 New Static Memory Controller (also referred as FMC) . BMC firmware . New register set . 5 chip select pins (CE0 ∼ CE4) . supports NOR flash, NAND flash and SPI flash memory. . single, dual and quad mode. Each controller has a memory range on which flash devices contents are mapped. Each device is assigned a window that can be changed at bootime with the Segment Address Registers. Each SPI flash device can then be accessed in two modes: Command and User. When in User mode, SPI transfers are initiated with accesses to the memory segment of a device. When in Command mode, memory operations on the memory segment of a device generate SPI commands automatically using a Control Register for the settings. This initial patch adds support for User mode. Command mode needs a little more work to check that the memory window on the AHB bus fits the device size. It will come later when support for direct mapping is added. Single and dual mode RX transfers are supported. Other types than SPI are not supported. Reviewed-by: Joel Stanley Tested-by: Joel Stanley Tested-by: Tao Ren Tested-by: Jae Hyun Yoo Signed-off-by: Chin-Ting Kuo Signed-off-by: Cédric Le Goater --- drivers/mtd/spi-nor/controllers/aspeed-smc.c | 921 ------------------- drivers/spi/spi-aspeed-smc.c | 717 +++++++++++++++ MAINTAINERS | 1 + drivers/mtd/spi-nor/controllers/Kconfig | 10 - drivers/mtd/spi-nor/controllers/Makefile | 1 - drivers/spi/Kconfig | 11 + drivers/spi/Makefile | 1 + 7 files changed, 730 insertions(+), 932 deletions(-) delete mode 100644 drivers/mtd/spi-nor/controllers/aspeed-smc.c create mode 100644 drivers/spi/spi-aspeed-smc.c diff --git a/drivers/mtd/spi-nor/controllers/aspeed-smc.c b/drivers/mtd/spi-nor/controllers/aspeed-smc.c deleted file mode 100644 index acfe010f9dd7..000000000000 --- a/drivers/mtd/spi-nor/controllers/aspeed-smc.c +++ /dev/null @@ -1,921 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * ASPEED Static Memory Controller driver - * - * Copyright (c) 2015-2016, IBM Corporation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DEVICE_NAME "aspeed-smc" - -/* - * The driver only support SPI flash - */ -enum aspeed_smc_flash_type { - smc_type_nor = 0, - smc_type_nand = 1, - smc_type_spi = 2, -}; - -struct aspeed_smc_chip; - -struct aspeed_smc_info { - u32 maxsize; /* maximum size of chip window */ - u8 nce; /* number of chip enables */ - bool hastype; /* flash type field exists in config reg */ - u8 we0; /* shift for write enable bit for CE0 */ - u8 ctl0; /* offset in regs of ctl for CE0 */ - - void (*set_4b)(struct aspeed_smc_chip *chip); -}; - -static void aspeed_smc_chip_set_4b_spi_2400(struct aspeed_smc_chip *chip); -static void aspeed_smc_chip_set_4b(struct aspeed_smc_chip *chip); - -static const struct aspeed_smc_info fmc_2400_info = { - .maxsize = 64 * 1024 * 1024, - .nce = 5, - .hastype = true, - .we0 = 16, - .ctl0 = 0x10, - .set_4b = aspeed_smc_chip_set_4b, -}; - -static const struct aspeed_smc_info spi_2400_info = { - .maxsize = 64 * 1024 * 1024, - .nce = 1, - .hastype = false, - .we0 = 0, - .ctl0 = 0x04, - .set_4b = aspeed_smc_chip_set_4b_spi_2400, -}; - -static const struct aspeed_smc_info fmc_2500_info = { - .maxsize = 256 * 1024 * 1024, - .nce = 3, - .hastype = true, - .we0 = 16, - .ctl0 = 0x10, - .set_4b = aspeed_smc_chip_set_4b, -}; - -static const struct aspeed_smc_info spi_2500_info = { - .maxsize = 128 * 1024 * 1024, - .nce = 2, - .hastype = false, - .we0 = 16, - .ctl0 = 0x10, - .set_4b = aspeed_smc_chip_set_4b, -}; - -enum aspeed_smc_ctl_reg_value { - smc_base, /* base value without mode for other commands */ - smc_read, /* command reg for (maybe fast) reads */ - smc_write, /* command reg for writes */ - smc_max, -}; - -struct aspeed_smc_controller; - -struct aspeed_smc_chip { - int cs; - struct aspeed_smc_controller *controller; - void __iomem *ctl; /* control register */ - void __iomem *ahb_base; /* base of chip window */ - u32 ahb_window_size; /* chip mapping window size */ - u32 ctl_val[smc_max]; /* control settings */ - enum aspeed_smc_flash_type type; /* what type of flash */ - struct spi_nor nor; -}; - -struct aspeed_smc_controller { - struct device *dev; - - struct mutex mutex; /* controller access mutex */ - const struct aspeed_smc_info *info; /* type info of controller */ - void __iomem *regs; /* controller registers */ - void __iomem *ahb_base; /* per-chip windows resource */ - u32 ahb_window_size; /* full mapping window size */ - - struct aspeed_smc_chip *chips[]; /* pointers to attached chips */ -}; - -/* - * SPI Flash Configuration Register (AST2500 SPI) - * or - * Type setting Register (AST2500 FMC). - * CE0 and CE1 can only be of type SPI. CE2 can be of type NOR but the - * driver does not support it. - */ -#define CONFIG_REG 0x0 -#define CONFIG_DISABLE_LEGACY BIT(31) /* 1 */ - -#define CONFIG_CE2_WRITE BIT(18) -#define CONFIG_CE1_WRITE BIT(17) -#define CONFIG_CE0_WRITE BIT(16) - -#define CONFIG_CE2_TYPE BIT(4) /* AST2500 FMC only */ -#define CONFIG_CE1_TYPE BIT(2) /* AST2500 FMC only */ -#define CONFIG_CE0_TYPE BIT(0) /* AST2500 FMC only */ - -/* - * CE Control Register - */ -#define CE_CONTROL_REG 0x4 - -/* - * CEx Control Register - */ -#define CONTROL_AAF_MODE BIT(31) -#define CONTROL_IO_MODE_MASK GENMASK(30, 28) -#define CONTROL_IO_DUAL_DATA BIT(29) -#define CONTROL_IO_DUAL_ADDR_DATA (BIT(29) | BIT(28)) -#define CONTROL_IO_QUAD_DATA BIT(30) -#define CONTROL_IO_QUAD_ADDR_DATA (BIT(30) | BIT(28)) -#define CONTROL_CE_INACTIVE_SHIFT 24 -#define CONTROL_CE_INACTIVE_MASK GENMASK(27, \ - CONTROL_CE_INACTIVE_SHIFT) -/* 0 = 16T ... 15 = 1T T=HCLK */ -#define CONTROL_COMMAND_SHIFT 16 -#define CONTROL_DUMMY_COMMAND_OUT BIT(15) -#define CONTROL_IO_DUMMY_HI BIT(14) -#define CONTROL_IO_DUMMY_HI_SHIFT 14 -#define CONTROL_CLK_DIV4 BIT(13) /* others */ -#define CONTROL_IO_ADDRESS_4B BIT(13) /* AST2400 SPI */ -#define CONTROL_RW_MERGE BIT(12) -#define CONTROL_IO_DUMMY_LO_SHIFT 6 -#define CONTROL_IO_DUMMY_LO GENMASK(7, \ - CONTROL_IO_DUMMY_LO_SHIFT) -#define CONTROL_IO_DUMMY_MASK (CONTROL_IO_DUMMY_HI | \ - CONTROL_IO_DUMMY_LO) -#define CONTROL_IO_DUMMY_SET(dummy) \ - (((((dummy) >> 2) & 0x1) << CONTROL_IO_DUMMY_HI_SHIFT) | \ - (((dummy) & 0x3) << CONTROL_IO_DUMMY_LO_SHIFT)) - -#define CONTROL_CLOCK_FREQ_SEL_SHIFT 8 -#define CONTROL_CLOCK_FREQ_SEL_MASK GENMASK(11, \ - CONTROL_CLOCK_FREQ_SEL_SHIFT) -#define CONTROL_LSB_FIRST BIT(5) -#define CONTROL_CLOCK_MODE_3 BIT(4) -#define CONTROL_IN_DUAL_DATA BIT(3) -#define CONTROL_CE_STOP_ACTIVE_CONTROL BIT(2) -#define CONTROL_COMMAND_MODE_MASK GENMASK(1, 0) -#define CONTROL_COMMAND_MODE_NORMAL 0 -#define CONTROL_COMMAND_MODE_FREAD 1 -#define CONTROL_COMMAND_MODE_WRITE 2 -#define CONTROL_COMMAND_MODE_USER 3 - -#define CONTROL_KEEP_MASK \ - (CONTROL_AAF_MODE | CONTROL_CE_INACTIVE_MASK | CONTROL_CLK_DIV4 | \ - CONTROL_CLOCK_FREQ_SEL_MASK | CONTROL_LSB_FIRST | CONTROL_CLOCK_MODE_3) - -/* - * The Segment Register uses a 8MB unit to encode the start address - * and the end address of the mapping window of a flash SPI slave : - * - * | byte 1 | byte 2 | byte 3 | byte 4 | - * +--------+--------+--------+--------+ - * | end | start | 0 | 0 | - */ -#define SEGMENT_ADDR_REG0 0x30 -#define SEGMENT_ADDR_START(_r) ((((_r) >> 16) & 0xFF) << 23) -#define SEGMENT_ADDR_END(_r) ((((_r) >> 24) & 0xFF) << 23) -#define SEGMENT_ADDR_VALUE(start, end) \ - (((((start) >> 23) & 0xFF) << 16) | ((((end) >> 23) & 0xFF) << 24)) -#define SEGMENT_ADDR_REG(controller, cs) \ - ((controller)->regs + SEGMENT_ADDR_REG0 + (cs) * 4) - -/* - * In user mode all data bytes read or written to the chip decode address - * range are transferred to or from the SPI bus. The range is treated as a - * fifo of arbitratry 1, 2, or 4 byte width but each write has to be aligned - * to its size. The address within the multiple 8kB range is ignored when - * sending bytes to the SPI bus. - * - * On the arm architecture, as of Linux version 4.3, memcpy_fromio and - * memcpy_toio on little endian targets use the optimized memcpy routines - * that were designed for well behavied memory storage. These routines - * have a stutter if the source and destination are not both word aligned, - * once with a duplicate access to the source after aligning to the - * destination to a word boundary, and again with a duplicate access to - * the source when the final byte count is not word aligned. - * - * When writing or reading the fifo this stutter discards data or sends - * too much data to the fifo and can not be used by this driver. - * - * While the low level io string routines that implement the insl family do - * the desired accesses and memory increments, the cross architecture io - * macros make them essentially impossible to use on a memory mapped address - * instead of a a token from the call to iomap of an io port. - * - * These fifo routines use readl and friends to a constant io port and update - * the memory buffer pointer and count via explicit code. The final updates - * to len are optimistically suppressed. - */ -static int aspeed_smc_read_from_ahb(void *buf, void __iomem *src, size_t len) -{ - size_t offset = 0; - - if (IS_ALIGNED((uintptr_t)src, sizeof(uintptr_t)) && - IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) { - ioread32_rep(src, buf, len >> 2); - offset = len & ~0x3; - len -= offset; - } - ioread8_rep(src, (u8 *)buf + offset, len); - return 0; -} - -static int aspeed_smc_write_to_ahb(void __iomem *dst, const void *buf, - size_t len) -{ - size_t offset = 0; - - if (IS_ALIGNED((uintptr_t)dst, sizeof(uintptr_t)) && - IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) { - iowrite32_rep(dst, buf, len >> 2); - offset = len & ~0x3; - len -= offset; - } - iowrite8_rep(dst, (const u8 *)buf + offset, len); - return 0; -} - -static inline u32 aspeed_smc_chip_write_bit(struct aspeed_smc_chip *chip) -{ - return BIT(chip->controller->info->we0 + chip->cs); -} - -static void aspeed_smc_chip_check_config(struct aspeed_smc_chip *chip) -{ - struct aspeed_smc_controller *controller = chip->controller; - u32 reg; - - reg = readl(controller->regs + CONFIG_REG); - - if (reg & aspeed_smc_chip_write_bit(chip)) - return; - - dev_dbg(controller->dev, "config write is not set ! @%p: 0x%08x\n", - controller->regs + CONFIG_REG, reg); - reg |= aspeed_smc_chip_write_bit(chip); - writel(reg, controller->regs + CONFIG_REG); -} - -static void aspeed_smc_start_user(struct spi_nor *nor) -{ - struct aspeed_smc_chip *chip = nor->priv; - u32 ctl = chip->ctl_val[smc_base]; - - /* - * When the chip is controlled in user mode, we need write - * access to send the opcodes to it. So check the config. - */ - aspeed_smc_chip_check_config(chip); - - ctl |= CONTROL_COMMAND_MODE_USER | - CONTROL_CE_STOP_ACTIVE_CONTROL; - writel(ctl, chip->ctl); - - ctl &= ~CONTROL_CE_STOP_ACTIVE_CONTROL; - writel(ctl, chip->ctl); -} - -static void aspeed_smc_stop_user(struct spi_nor *nor) -{ - struct aspeed_smc_chip *chip = nor->priv; - - u32 ctl = chip->ctl_val[smc_read]; - u32 ctl2 = ctl | CONTROL_COMMAND_MODE_USER | - CONTROL_CE_STOP_ACTIVE_CONTROL; - - writel(ctl2, chip->ctl); /* stop user CE control */ - writel(ctl, chip->ctl); /* default to fread or read mode */ -} - -static int aspeed_smc_prep(struct spi_nor *nor) -{ - struct aspeed_smc_chip *chip = nor->priv; - - mutex_lock(&chip->controller->mutex); - return 0; -} - -static void aspeed_smc_unprep(struct spi_nor *nor) -{ - struct aspeed_smc_chip *chip = nor->priv; - - mutex_unlock(&chip->controller->mutex); -} - -static int aspeed_smc_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, - size_t len) -{ - struct aspeed_smc_chip *chip = nor->priv; - - aspeed_smc_start_user(nor); - aspeed_smc_write_to_ahb(chip->ahb_base, &opcode, 1); - aspeed_smc_read_from_ahb(buf, chip->ahb_base, len); - aspeed_smc_stop_user(nor); - return 0; -} - -static int aspeed_smc_write_reg(struct spi_nor *nor, u8 opcode, const u8 *buf, - size_t len) -{ - struct aspeed_smc_chip *chip = nor->priv; - - aspeed_smc_start_user(nor); - aspeed_smc_write_to_ahb(chip->ahb_base, &opcode, 1); - aspeed_smc_write_to_ahb(chip->ahb_base, buf, len); - aspeed_smc_stop_user(nor); - return 0; -} - -static void aspeed_smc_send_cmd_addr(struct spi_nor *nor, u8 cmd, u32 addr) -{ - struct aspeed_smc_chip *chip = nor->priv; - __be32 temp; - u32 cmdaddr; - - switch (nor->addr_width) { - default: - WARN_ONCE(1, "Unexpected address width %u, defaulting to 3\n", - nor->addr_width); - fallthrough; - case 3: - cmdaddr = addr & 0xFFFFFF; - cmdaddr |= cmd << 24; - - temp = cpu_to_be32(cmdaddr); - aspeed_smc_write_to_ahb(chip->ahb_base, &temp, 4); - break; - case 4: - temp = cpu_to_be32(addr); - aspeed_smc_write_to_ahb(chip->ahb_base, &cmd, 1); - aspeed_smc_write_to_ahb(chip->ahb_base, &temp, 4); - break; - } -} - -static ssize_t aspeed_smc_read_user(struct spi_nor *nor, loff_t from, - size_t len, u_char *read_buf) -{ - struct aspeed_smc_chip *chip = nor->priv; - int i; - u8 dummy = 0xFF; - - aspeed_smc_start_user(nor); - aspeed_smc_send_cmd_addr(nor, nor->read_opcode, from); - for (i = 0; i < chip->nor.read_dummy / 8; i++) - aspeed_smc_write_to_ahb(chip->ahb_base, &dummy, sizeof(dummy)); - - aspeed_smc_read_from_ahb(read_buf, chip->ahb_base, len); - aspeed_smc_stop_user(nor); - return len; -} - -static ssize_t aspeed_smc_write_user(struct spi_nor *nor, loff_t to, - size_t len, const u_char *write_buf) -{ - struct aspeed_smc_chip *chip = nor->priv; - - aspeed_smc_start_user(nor); - aspeed_smc_send_cmd_addr(nor, nor->program_opcode, to); - aspeed_smc_write_to_ahb(chip->ahb_base, write_buf, len); - aspeed_smc_stop_user(nor); - return len; -} - -static int aspeed_smc_unregister(struct aspeed_smc_controller *controller) -{ - struct aspeed_smc_chip *chip; - int n; - - for (n = 0; n < controller->info->nce; n++) { - chip = controller->chips[n]; - if (chip) - mtd_device_unregister(&chip->nor.mtd); - } - - return 0; -} - -static int aspeed_smc_remove(struct platform_device *dev) -{ - return aspeed_smc_unregister(platform_get_drvdata(dev)); -} - -static const struct of_device_id aspeed_smc_matches[] = { - { .compatible = "aspeed,ast2400-fmc", .data = &fmc_2400_info }, - { .compatible = "aspeed,ast2400-spi", .data = &spi_2400_info }, - { .compatible = "aspeed,ast2500-fmc", .data = &fmc_2500_info }, - { .compatible = "aspeed,ast2500-spi", .data = &spi_2500_info }, - { } -}; -MODULE_DEVICE_TABLE(of, aspeed_smc_matches); - -/* - * Each chip has a mapping window defined by a segment address - * register defining a start and an end address on the AHB bus. These - * addresses can be configured to fit the chip size and offer a - * contiguous memory region across chips. For the moment, we only - * check that each chip segment is valid. - */ -static void __iomem *aspeed_smc_chip_base(struct aspeed_smc_chip *chip, - struct resource *res) -{ - struct aspeed_smc_controller *controller = chip->controller; - u32 offset = 0; - u32 reg; - - if (controller->info->nce > 1) { - reg = readl(SEGMENT_ADDR_REG(controller, chip->cs)); - - if (SEGMENT_ADDR_START(reg) >= SEGMENT_ADDR_END(reg)) - return NULL; - - offset = SEGMENT_ADDR_START(reg) - res->start; - } - - return controller->ahb_base + offset; -} - -static u32 aspeed_smc_ahb_base_phy(struct aspeed_smc_controller *controller) -{ - u32 seg0_val = readl(SEGMENT_ADDR_REG(controller, 0)); - - return SEGMENT_ADDR_START(seg0_val); -} - -static u32 chip_set_segment(struct aspeed_smc_chip *chip, u32 cs, u32 start, - u32 size) -{ - struct aspeed_smc_controller *controller = chip->controller; - void __iomem *seg_reg; - u32 seg_oldval, seg_newval, ahb_base_phy, end; - - ahb_base_phy = aspeed_smc_ahb_base_phy(controller); - - seg_reg = SEGMENT_ADDR_REG(controller, cs); - seg_oldval = readl(seg_reg); - - /* - * If the chip size is not specified, use the default segment - * size, but take into account the possible overlap with the - * previous segment - */ - if (!size) - size = SEGMENT_ADDR_END(seg_oldval) - start; - - /* - * The segment cannot exceed the maximum window size of the - * controller. - */ - if (start + size > ahb_base_phy + controller->ahb_window_size) { - size = ahb_base_phy + controller->ahb_window_size - start; - dev_warn(chip->nor.dev, "CE%d window resized to %dMB", - cs, size >> 20); - } - - end = start + size; - seg_newval = SEGMENT_ADDR_VALUE(start, end); - writel(seg_newval, seg_reg); - - /* - * Restore default value if something goes wrong. The chip - * might have set some bogus value and we would loose access - * to the chip. - */ - if (seg_newval != readl(seg_reg)) { - dev_err(chip->nor.dev, "CE%d window invalid", cs); - writel(seg_oldval, seg_reg); - start = SEGMENT_ADDR_START(seg_oldval); - end = SEGMENT_ADDR_END(seg_oldval); - size = end - start; - } - - dev_info(chip->nor.dev, "CE%d window [ 0x%.8x - 0x%.8x ] %dMB", - cs, start, end, size >> 20); - - return size; -} - -/* - * The segment register defines the mapping window on the AHB bus and - * it needs to be configured depending on the chip size. The segment - * register of the following CE also needs to be tuned in order to - * provide a contiguous window across multiple chips. - * - * This is expected to be called in increasing CE order - */ -static u32 aspeed_smc_chip_set_segment(struct aspeed_smc_chip *chip) -{ - struct aspeed_smc_controller *controller = chip->controller; - u32 ahb_base_phy, start; - u32 size = chip->nor.mtd.size; - - /* - * Each controller has a chip size limit for direct memory - * access - */ - if (size > controller->info->maxsize) - size = controller->info->maxsize; - - /* - * The AST2400 SPI controller only handles one chip and does - * not have segment registers. Let's use the chip size for the - * AHB window. - */ - if (controller->info == &spi_2400_info) - goto out; - - /* - * The AST2500 SPI controller has a HW bug when the CE0 chip - * size reaches 128MB. Enforce a size limit of 120MB to - * prevent the controller from using bogus settings in the - * segment register. - */ - if (chip->cs == 0 && controller->info == &spi_2500_info && - size == SZ_128M) { - size = 120 << 20; - dev_info(chip->nor.dev, - "CE%d window resized to %dMB (AST2500 HW quirk)", - chip->cs, size >> 20); - } - - ahb_base_phy = aspeed_smc_ahb_base_phy(controller); - - /* - * As a start address for the current segment, use the default - * start address if we are handling CE0 or use the previous - * segment ending address - */ - if (chip->cs) { - u32 prev = readl(SEGMENT_ADDR_REG(controller, chip->cs - 1)); - - start = SEGMENT_ADDR_END(prev); - } else { - start = ahb_base_phy; - } - - size = chip_set_segment(chip, chip->cs, start, size); - - /* Update chip base address on the AHB bus */ - chip->ahb_base = controller->ahb_base + (start - ahb_base_phy); - - /* - * Now, make sure the next segment does not overlap with the - * current one we just configured, even if there is no - * available chip. That could break access in Command Mode. - */ - if (chip->cs < controller->info->nce - 1) - chip_set_segment(chip, chip->cs + 1, start + size, 0); - -out: - if (size < chip->nor.mtd.size) - dev_warn(chip->nor.dev, - "CE%d window too small for chip %dMB", - chip->cs, (u32)chip->nor.mtd.size >> 20); - - return size; -} - -static void aspeed_smc_chip_enable_write(struct aspeed_smc_chip *chip) -{ - struct aspeed_smc_controller *controller = chip->controller; - u32 reg; - - reg = readl(controller->regs + CONFIG_REG); - - reg |= aspeed_smc_chip_write_bit(chip); - writel(reg, controller->regs + CONFIG_REG); -} - -static void aspeed_smc_chip_set_type(struct aspeed_smc_chip *chip, int type) -{ - struct aspeed_smc_controller *controller = chip->controller; - u32 reg; - - chip->type = type; - - reg = readl(controller->regs + CONFIG_REG); - reg &= ~(3 << (chip->cs * 2)); - reg |= chip->type << (chip->cs * 2); - writel(reg, controller->regs + CONFIG_REG); -} - -/* - * The first chip of the AST2500 FMC flash controller is strapped by - * hardware, or autodetected, but other chips need to be set. Enforce - * the 4B setting for all chips. - */ -static void aspeed_smc_chip_set_4b(struct aspeed_smc_chip *chip) -{ - struct aspeed_smc_controller *controller = chip->controller; - u32 reg; - - reg = readl(controller->regs + CE_CONTROL_REG); - reg |= 1 << chip->cs; - writel(reg, controller->regs + CE_CONTROL_REG); -} - -/* - * The AST2400 SPI flash controller does not have a CE Control - * register. It uses the CE0 control register to set 4Byte mode at the - * controller level. - */ -static void aspeed_smc_chip_set_4b_spi_2400(struct aspeed_smc_chip *chip) -{ - chip->ctl_val[smc_base] |= CONTROL_IO_ADDRESS_4B; - chip->ctl_val[smc_read] |= CONTROL_IO_ADDRESS_4B; -} - -static int aspeed_smc_chip_setup_init(struct aspeed_smc_chip *chip, - struct resource *res) -{ - struct aspeed_smc_controller *controller = chip->controller; - const struct aspeed_smc_info *info = controller->info; - u32 reg, base_reg; - - /* - * Always turn on the write enable bit to allow opcodes to be - * sent in user mode. - */ - aspeed_smc_chip_enable_write(chip); - - /* The driver only supports SPI type flash */ - if (info->hastype) - aspeed_smc_chip_set_type(chip, smc_type_spi); - - /* - * Configure chip base address in memory - */ - chip->ahb_base = aspeed_smc_chip_base(chip, res); - if (!chip->ahb_base) { - dev_warn(chip->nor.dev, "CE%d window closed", chip->cs); - return -EINVAL; - } - - /* - * Get value of the inherited control register. U-Boot usually - * does some timing calibration on the FMC chip, so it's good - * to keep them. In the future, we should handle calibration - * from Linux. - */ - reg = readl(chip->ctl); - dev_dbg(controller->dev, "control register: %08x\n", reg); - - base_reg = reg & CONTROL_KEEP_MASK; - if (base_reg != reg) { - dev_dbg(controller->dev, - "control register changed to: %08x\n", - base_reg); - } - chip->ctl_val[smc_base] = base_reg; - - /* - * Retain the prior value of the control register as the - * default if it was normal access mode. Otherwise start with - * the sanitized base value set to read mode. - */ - if ((reg & CONTROL_COMMAND_MODE_MASK) == - CONTROL_COMMAND_MODE_NORMAL) - chip->ctl_val[smc_read] = reg; - else - chip->ctl_val[smc_read] = chip->ctl_val[smc_base] | - CONTROL_COMMAND_MODE_NORMAL; - - dev_dbg(controller->dev, "default control register: %08x\n", - chip->ctl_val[smc_read]); - return 0; -} - -static int aspeed_smc_chip_setup_finish(struct aspeed_smc_chip *chip) -{ - struct aspeed_smc_controller *controller = chip->controller; - const struct aspeed_smc_info *info = controller->info; - u32 cmd; - - if (chip->nor.addr_width == 4 && info->set_4b) - info->set_4b(chip); - - /* This is for direct AHB access when using Command Mode. */ - chip->ahb_window_size = aspeed_smc_chip_set_segment(chip); - - /* - * base mode has not been optimized yet. use it for writes. - */ - chip->ctl_val[smc_write] = chip->ctl_val[smc_base] | - chip->nor.program_opcode << CONTROL_COMMAND_SHIFT | - CONTROL_COMMAND_MODE_WRITE; - - dev_dbg(controller->dev, "write control register: %08x\n", - chip->ctl_val[smc_write]); - - /* - * TODO: Adjust clocks if fast read is supported and interpret - * SPI NOR flags to adjust controller settings. - */ - if (chip->nor.read_proto == SNOR_PROTO_1_1_1) { - if (chip->nor.read_dummy == 0) - cmd = CONTROL_COMMAND_MODE_NORMAL; - else - cmd = CONTROL_COMMAND_MODE_FREAD; - } else { - dev_err(chip->nor.dev, "unsupported SPI read mode\n"); - return -EINVAL; - } - - chip->ctl_val[smc_read] |= cmd | - CONTROL_IO_DUMMY_SET(chip->nor.read_dummy / 8); - - dev_dbg(controller->dev, "base control register: %08x\n", - chip->ctl_val[smc_read]); - return 0; -} - -static const struct spi_nor_controller_ops aspeed_smc_controller_ops = { - .prepare = aspeed_smc_prep, - .unprepare = aspeed_smc_unprep, - .read_reg = aspeed_smc_read_reg, - .write_reg = aspeed_smc_write_reg, - .read = aspeed_smc_read_user, - .write = aspeed_smc_write_user, -}; - -static int aspeed_smc_setup_flash(struct aspeed_smc_controller *controller, - struct device_node *np, struct resource *r) -{ - const struct spi_nor_hwcaps hwcaps = { - .mask = SNOR_HWCAPS_READ | - SNOR_HWCAPS_READ_FAST | - SNOR_HWCAPS_PP, - }; - const struct aspeed_smc_info *info = controller->info; - struct device *dev = controller->dev; - struct device_node *child; - unsigned int cs; - int ret = -ENODEV; - bool found_one = false; - - for_each_available_child_of_node(np, child) { - struct aspeed_smc_chip *chip; - struct spi_nor *nor; - struct mtd_info *mtd; - - /* This driver does not support NAND or NOR flash devices. */ - if (!of_device_is_compatible(child, "jedec,spi-nor")) - continue; - - ret = of_property_read_u32(child, "reg", &cs); - if (ret) { - dev_err(dev, "Couldn't not read chip select.\n"); - break; - } - - if (cs >= info->nce) { - dev_err(dev, "Chip select %d out of range.\n", - cs); - ret = -ERANGE; - break; - } - - if (controller->chips[cs]) { - dev_err(dev, "Chip select %d already in use by %s\n", - cs, dev_name(controller->chips[cs]->nor.dev)); - ret = -EBUSY; - break; - } - - chip = devm_kzalloc(controller->dev, sizeof(*chip), GFP_KERNEL); - if (!chip) { - ret = -ENOMEM; - break; - } - - chip->controller = controller; - chip->ctl = controller->regs + info->ctl0 + cs * 4; - chip->cs = cs; - - nor = &chip->nor; - mtd = &nor->mtd; - - nor->dev = dev; - nor->priv = chip; - spi_nor_set_flash_node(nor, child); - nor->controller_ops = &aspeed_smc_controller_ops; - - ret = aspeed_smc_chip_setup_init(chip, r); - if (ret) - break; - - /* - * TODO: Add support for Dual and Quad SPI protocols - * attach when board support is present as determined - * by of property. - */ - ret = spi_nor_scan(nor, NULL, &hwcaps); - /* - * If we fail to scan the device it might not be present or - * broken. Don't fail the whole controller if others work. - */ - if (ret) { - if (found_one) - ret = 0; - - devm_kfree(controller->dev, chip); - continue; - } - - ret = aspeed_smc_chip_setup_finish(chip); - if (ret) - break; - - ret = mtd_device_register(mtd, NULL, 0); - if (ret) - break; - - controller->chips[cs] = chip; - found_one = true; - } - - if (ret) { - of_node_put(child); - aspeed_smc_unregister(controller); - } - - return ret; -} - -static int aspeed_smc_probe(struct platform_device *pdev) -{ - struct device_node *np = pdev->dev.of_node; - struct device *dev = &pdev->dev; - struct aspeed_smc_controller *controller; - const struct of_device_id *match; - const struct aspeed_smc_info *info; - struct resource *res; - int ret; - - match = of_match_device(aspeed_smc_matches, &pdev->dev); - if (!match || !match->data) - return -ENODEV; - info = match->data; - - controller = devm_kzalloc(&pdev->dev, - struct_size(controller, chips, info->nce), - GFP_KERNEL); - if (!controller) - return -ENOMEM; - controller->info = info; - controller->dev = dev; - - mutex_init(&controller->mutex); - platform_set_drvdata(pdev, controller); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - controller->regs = devm_ioremap_resource(dev, res); - if (IS_ERR(controller->regs)) - return PTR_ERR(controller->regs); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - controller->ahb_base = devm_ioremap_resource(dev, res); - if (IS_ERR(controller->ahb_base)) - return PTR_ERR(controller->ahb_base); - - controller->ahb_window_size = resource_size(res); - - ret = aspeed_smc_setup_flash(controller, np, res); - if (ret) - dev_err(dev, "Aspeed SMC probe failed %d\n", ret); - - return ret; -} - -static struct platform_driver aspeed_smc_driver = { - .probe = aspeed_smc_probe, - .remove = aspeed_smc_remove, - .driver = { - .name = DEVICE_NAME, - .of_match_table = aspeed_smc_matches, - } -}; - -module_platform_driver(aspeed_smc_driver); - -MODULE_DESCRIPTION("ASPEED Static Memory Controller Driver"); -MODULE_AUTHOR("Cedric Le Goater "); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/spi/spi-aspeed-smc.c b/drivers/spi/spi-aspeed-smc.c new file mode 100644 index 000000000000..cb5a0652e5a4 --- /dev/null +++ b/drivers/spi/spi-aspeed-smc.c @@ -0,0 +1,717 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * ASPEED FMC/SPI Memory Controller Driver + * + * Copyright (c) 2015-2022, IBM Corporation. + * Copyright (c) 2020, ASPEED Corporation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DEVICE_NAME "spi-aspeed-smc" + +/* Type setting Register */ +#define CONFIG_REG 0x0 +#define CONFIG_TYPE_SPI 0x2 + +/* CE Control Register */ +#define CE_CTRL_REG 0x4 + +/* CEx Control Register */ +#define CE0_CTRL_REG 0x10 +#define CTRL_IO_MODE_MASK GENMASK(30, 28) +#define CTRL_IO_SINGLE_DATA 0x0 +#define CTRL_IO_DUAL_DATA BIT(29) +#define CTRL_IO_QUAD_DATA BIT(30) +#define CTRL_COMMAND_SHIFT 16 +#define CTRL_IO_DUMMY_SET(dummy) \ + (((((dummy) >> 2) & 0x1) << 14) | (((dummy) & 0x3) << 6)) +#define CTRL_CE_STOP_ACTIVE BIT(2) +#define CTRL_IO_MODE_CMD_MASK GENMASK(1, 0) +#define CTRL_IO_MODE_NORMAL 0x0 +#define CTRL_IO_MODE_READ 0x1 +#define CTRL_IO_MODE_WRITE 0x2 +#define CTRL_IO_MODE_USER 0x3 + +#define CTRL_IO_CMD_MASK 0xf0ff40c3 + +/* CEx Address Decoding Range Register */ +#define CE0_SEGMENT_ADDR_REG 0x30 + +enum aspeed_spi_ctl_reg_value { + ASPEED_SPI_BASE, + ASPEED_SPI_READ, + ASPEED_SPI_WRITE, + ASPEED_SPI_MAX, +}; + +struct aspeed_spi; + +struct aspeed_spi_chip { + struct aspeed_spi *aspi; + u32 cs; + void __iomem *ctl; + void __iomem *ahb_base; + u32 ahb_window_size; + u32 ctl_val[ASPEED_SPI_MAX]; + u32 clk_freq; +}; + +struct aspeed_spi_data { + u32 ctl0; + u32 max_cs; + bool hastype; + u32 mode_bits; + u32 we0; + + u32 (*segment_start)(struct aspeed_spi *aspi, u32 reg); + u32 (*segment_end)(struct aspeed_spi *aspi, u32 reg); + u32 (*segment_reg)(struct aspeed_spi *aspi, u32 start, u32 end); +}; + +#define ASPEED_SPI_MAX_NUM_CS 5 + +struct aspeed_spi { + const struct aspeed_spi_data *data; + + void __iomem *regs; + void __iomem *ahb_base; + u32 ahb_base_phy; + u32 ahb_window_size; + struct device *dev; + + struct clk *clk; + u32 clk_freq; + + struct aspeed_spi_chip chips[ASPEED_SPI_MAX_NUM_CS]; +}; + +static u32 aspeed_spi_get_io_mode(const struct spi_mem_op *op) +{ + switch (op->data.buswidth) { + case 1: + return CTRL_IO_SINGLE_DATA; + case 2: + return CTRL_IO_DUAL_DATA; + case 4: + return CTRL_IO_QUAD_DATA; + default: + return CTRL_IO_SINGLE_DATA; + } +} + +static void aspeed_spi_set_io_mode(struct aspeed_spi_chip *chip, u32 io_mode) +{ + u32 ctl; + + if (io_mode > 0) { + ctl = readl(chip->ctl) & ~CTRL_IO_MODE_MASK; + ctl |= io_mode; + writel(ctl, chip->ctl); + } +} + +static void aspeed_spi_start_user(struct aspeed_spi_chip *chip) +{ + u32 ctl = chip->ctl_val[ASPEED_SPI_BASE]; + + ctl |= CTRL_IO_MODE_USER | CTRL_CE_STOP_ACTIVE; + writel(ctl, chip->ctl); + + ctl &= ~CTRL_CE_STOP_ACTIVE; + writel(ctl, chip->ctl); +} + +static void aspeed_spi_stop_user(struct aspeed_spi_chip *chip) +{ + u32 ctl = chip->ctl_val[ASPEED_SPI_READ] | + CTRL_IO_MODE_USER | CTRL_CE_STOP_ACTIVE; + + writel(ctl, chip->ctl); + + /* Restore defaults */ + writel(chip->ctl_val[ASPEED_SPI_READ], chip->ctl); +} + +static int aspeed_spi_read_from_ahb(void *buf, void __iomem *src, size_t len) +{ + size_t offset = 0; + + if (IS_ALIGNED((uintptr_t)src, sizeof(uintptr_t)) && + IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) { + ioread32_rep(src, buf, len >> 2); + offset = len & ~0x3; + len -= offset; + } + ioread8_rep(src, (u8 *)buf + offset, len); + return 0; +} + +static int aspeed_spi_write_to_ahb(void __iomem *dst, const void *buf, size_t len) +{ + size_t offset = 0; + + if (IS_ALIGNED((uintptr_t)dst, sizeof(uintptr_t)) && + IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) { + iowrite32_rep(dst, buf, len >> 2); + offset = len & ~0x3; + len -= offset; + } + iowrite8_rep(dst, (const u8 *)buf + offset, len); + return 0; +} + +static int aspeed_spi_send_cmd_addr(struct aspeed_spi_chip *chip, u8 addr_nbytes, + u64 offset, u32 opcode) +{ + __be32 temp; + u32 cmdaddr; + + switch (addr_nbytes) { + case 3: + cmdaddr = offset & 0xFFFFFF; + cmdaddr |= opcode << 24; + + temp = cpu_to_be32(cmdaddr); + aspeed_spi_write_to_ahb(chip->ahb_base, &temp, 4); + break; + case 4: + temp = cpu_to_be32(offset); + aspeed_spi_write_to_ahb(chip->ahb_base, &opcode, 1); + aspeed_spi_write_to_ahb(chip->ahb_base, &temp, 4); + break; + default: + WARN_ONCE(1, "Unexpected address width %u", addr_nbytes); + return -EOPNOTSUPP; + } + return 0; +} + +static int aspeed_spi_read_reg(struct aspeed_spi_chip *chip, + const struct spi_mem_op *op) +{ + aspeed_spi_start_user(chip); + aspeed_spi_write_to_ahb(chip->ahb_base, &op->cmd.opcode, 1); + aspeed_spi_read_from_ahb(op->data.buf.in, + chip->ahb_base, op->data.nbytes); + aspeed_spi_stop_user(chip); + return 0; +} + +static int aspeed_spi_write_reg(struct aspeed_spi_chip *chip, + const struct spi_mem_op *op) +{ + aspeed_spi_start_user(chip); + aspeed_spi_write_to_ahb(chip->ahb_base, &op->cmd.opcode, 1); + aspeed_spi_write_to_ahb(chip->ahb_base, op->data.buf.out, + op->data.nbytes); + aspeed_spi_stop_user(chip); + return 0; +} + +static ssize_t aspeed_spi_read_user(struct aspeed_spi_chip *chip, + const struct spi_mem_op *op, + u64 offset, size_t len, void *buf) +{ + int io_mode = aspeed_spi_get_io_mode(op); + u8 dummy = 0xFF; + int i; + int ret; + + aspeed_spi_start_user(chip); + + ret = aspeed_spi_send_cmd_addr(chip, op->addr.nbytes, offset, op->cmd.opcode); + if (ret < 0) + return ret; + + if (op->dummy.buswidth && op->dummy.nbytes) { + for (i = 0; i < op->dummy.nbytes / op->dummy.buswidth; i++) + aspeed_spi_write_to_ahb(chip->ahb_base, &dummy, sizeof(dummy)); + } + + aspeed_spi_set_io_mode(chip, io_mode); + + aspeed_spi_read_from_ahb(buf, chip->ahb_base, len); + aspeed_spi_stop_user(chip); + return 0; +} + +static ssize_t aspeed_spi_write_user(struct aspeed_spi_chip *chip, + const struct spi_mem_op *op) +{ + int ret; + + aspeed_spi_start_user(chip); + ret = aspeed_spi_send_cmd_addr(chip, op->addr.nbytes, op->addr.val, op->cmd.opcode); + if (ret < 0) + return ret; + aspeed_spi_write_to_ahb(chip->ahb_base, op->data.buf.out, op->data.nbytes); + aspeed_spi_stop_user(chip); + return 0; +} + +/* support for 1-1-1, 1-1-2 or 1-1-4 */ +static bool aspeed_spi_supports_op(struct spi_mem *mem, const struct spi_mem_op *op) +{ + if (op->cmd.buswidth > 1) + return false; + + if (op->addr.nbytes != 0) { + if (op->addr.buswidth > 1) + return false; + if (op->addr.nbytes < 3 || op->addr.nbytes > 4) + return false; + } + + if (op->dummy.nbytes != 0) { + if (op->dummy.buswidth > 1 || op->dummy.nbytes > 7) + return false; + } + + if (op->data.nbytes != 0 && op->data.buswidth > 4) + return false; + + return spi_mem_default_supports_op(mem, op); +} + +static int do_aspeed_spi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) +{ + struct aspeed_spi *aspi = spi_controller_get_devdata(mem->spi->master); + struct aspeed_spi_chip *chip = &aspi->chips[mem->spi->chip_select]; + u32 addr_mode, addr_mode_backup; + u32 ctl_val; + int ret = 0; + + dev_dbg(aspi->dev, + "CE%d %s OP %#x mode:%d.%d.%d.%d naddr:%#x ndummies:%#x len:%#x", + chip->cs, op->data.dir == SPI_MEM_DATA_IN ? "read" : "write", + op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth, + op->dummy.buswidth, op->data.buswidth, + op->addr.nbytes, op->dummy.nbytes, op->data.nbytes); + + addr_mode = readl(aspi->regs + CE_CTRL_REG); + addr_mode_backup = addr_mode; + + ctl_val = chip->ctl_val[ASPEED_SPI_BASE]; + ctl_val &= ~CTRL_IO_CMD_MASK; + + ctl_val |= op->cmd.opcode << CTRL_COMMAND_SHIFT; + + /* 4BYTE address mode */ + if (op->addr.nbytes) { + if (op->addr.nbytes == 4) + addr_mode |= (0x11 << chip->cs); + else + addr_mode &= ~(0x11 << chip->cs); + } + + if (op->dummy.nbytes) + ctl_val |= CTRL_IO_DUMMY_SET(op->dummy.nbytes / op->dummy.buswidth); + + if (op->data.nbytes) + ctl_val |= aspeed_spi_get_io_mode(op); + + if (op->data.dir == SPI_MEM_DATA_OUT) + ctl_val |= CTRL_IO_MODE_WRITE; + else + ctl_val |= CTRL_IO_MODE_READ; + + if (addr_mode != addr_mode_backup) + writel(addr_mode, aspi->regs + CE_CTRL_REG); + writel(ctl_val, chip->ctl); + + if (op->data.dir == SPI_MEM_DATA_IN) { + if (!op->addr.nbytes) + ret = aspeed_spi_read_reg(chip, op); + else + ret = aspeed_spi_read_user(chip, op, op->addr.val, + op->data.nbytes, op->data.buf.in); + } else { + if (!op->addr.nbytes) + ret = aspeed_spi_write_reg(chip, op); + else + ret = aspeed_spi_write_user(chip, op); + } + + /* Restore defaults */ + if (addr_mode != addr_mode_backup) + writel(addr_mode_backup, aspi->regs + CE_CTRL_REG); + writel(chip->ctl_val[ASPEED_SPI_READ], chip->ctl); + return ret; +} + +static int aspeed_spi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) +{ + int ret; + + ret = do_aspeed_spi_exec_op(mem, op); + if (ret) + dev_err(&mem->spi->dev, "operation failed: %d\n", ret); + return ret; +} + +static const char *aspeed_spi_get_name(struct spi_mem *mem) +{ + struct aspeed_spi *aspi = spi_controller_get_devdata(mem->spi->master); + struct device *dev = aspi->dev; + + return devm_kasprintf(dev, GFP_KERNEL, "%s.%d", dev_name(dev), mem->spi->chip_select); +} + +struct aspeed_spi_window { + u32 cs; + u32 offset; + u32 size; +}; + +static void aspeed_spi_get_windows(struct aspeed_spi *aspi, + struct aspeed_spi_window windows[ASPEED_SPI_MAX_NUM_CS]) +{ + const struct aspeed_spi_data *data = aspi->data; + u32 reg_val; + u32 cs; + + for (cs = 0; cs < aspi->data->max_cs; cs++) { + reg_val = readl(aspi->regs + CE0_SEGMENT_ADDR_REG + cs * 4); + windows[cs].cs = cs; + windows[cs].size = data->segment_end(aspi, reg_val) - + data->segment_start(aspi, reg_val); + windows[cs].offset = cs ? windows[cs - 1].offset + windows[cs - 1].size : 0; + dev_vdbg(aspi->dev, "CE%d offset=0x%.8x size=0x%x\n", cs, + windows[cs].offset, windows[cs].size); + } +} + +/* + * On the AST2600, some CE windows are closed by default at reset but + * U-Boot should open all. + */ +static int aspeed_spi_chip_set_default_window(struct aspeed_spi_chip *chip) +{ + struct aspeed_spi *aspi = chip->aspi; + struct aspeed_spi_window windows[ASPEED_SPI_MAX_NUM_CS] = { 0 }; + struct aspeed_spi_window *win = &windows[chip->cs]; + + aspeed_spi_get_windows(aspi, windows); + + chip->ahb_base = aspi->ahb_base + win->offset; + chip->ahb_window_size = win->size; + + dev_dbg(aspi->dev, "CE%d default window [ 0x%.8x - 0x%.8x ] %dMB", + chip->cs, aspi->ahb_base_phy + win->offset, + aspi->ahb_base_phy + win->offset + win->size - 1, + win->size >> 20); + + return chip->ahb_window_size ? 0 : -1; +} + +static const struct spi_controller_mem_ops aspeed_spi_mem_ops = { + .supports_op = aspeed_spi_supports_op, + .exec_op = aspeed_spi_exec_op, + .get_name = aspeed_spi_get_name, +}; + +static void aspeed_spi_chip_set_type(struct aspeed_spi *aspi, unsigned int cs, int type) +{ + u32 reg; + + reg = readl(aspi->regs + CONFIG_REG); + reg &= ~(0x3 << (cs * 2)); + reg |= type << (cs * 2); + writel(reg, aspi->regs + CONFIG_REG); +} + +static void aspeed_spi_chip_enable(struct aspeed_spi *aspi, unsigned int cs, bool enable) +{ + u32 we_bit = BIT(aspi->data->we0 + cs); + u32 reg = readl(aspi->regs + CONFIG_REG); + + if (enable) + reg |= we_bit; + else + reg &= ~we_bit; + writel(reg, aspi->regs + CONFIG_REG); +} + +static int aspeed_spi_setup(struct spi_device *spi) +{ + struct aspeed_spi *aspi = spi_controller_get_devdata(spi->master); + const struct aspeed_spi_data *data = aspi->data; + unsigned int cs = spi->chip_select; + struct aspeed_spi_chip *chip = &aspi->chips[cs]; + + chip->aspi = aspi; + chip->cs = cs; + chip->ctl = aspi->regs + data->ctl0 + cs * 4; + + /* The driver only supports SPI type flash */ + if (data->hastype) + aspeed_spi_chip_set_type(aspi, cs, CONFIG_TYPE_SPI); + + if (aspeed_spi_chip_set_default_window(chip) < 0) { + dev_warn(aspi->dev, "CE%d window invalid", cs); + return -EINVAL; + } + + aspeed_spi_chip_enable(aspi, cs, true); + + chip->ctl_val[ASPEED_SPI_BASE] = CTRL_CE_STOP_ACTIVE | CTRL_IO_MODE_USER; + + dev_dbg(aspi->dev, "CE%d setup done\n", cs); + return 0; +} + +static void aspeed_spi_cleanup(struct spi_device *spi) +{ + struct aspeed_spi *aspi = spi_controller_get_devdata(spi->master); + unsigned int cs = spi->chip_select; + + aspeed_spi_chip_enable(aspi, cs, false); + + dev_dbg(aspi->dev, "CE%d cleanup done\n", cs); +} + +static void aspeed_spi_enable(struct aspeed_spi *aspi, bool enable) +{ + int cs; + + for (cs = 0; cs < aspi->data->max_cs; cs++) + aspeed_spi_chip_enable(aspi, cs, enable); +} + +static int aspeed_spi_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct aspeed_spi_data *data; + struct spi_controller *ctlr; + struct aspeed_spi *aspi; + struct resource *res; + int ret; + + data = of_device_get_match_data(&pdev->dev); + if (!data) + return -ENODEV; + + ctlr = devm_spi_alloc_master(dev, sizeof(*aspi)); + if (!ctlr) + return -ENOMEM; + + aspi = spi_controller_get_devdata(ctlr); + platform_set_drvdata(pdev, aspi); + aspi->data = data; + aspi->dev = dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + aspi->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(aspi->regs)) { + dev_err(dev, "missing AHB register window\n"); + return PTR_ERR(aspi->regs); + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + aspi->ahb_base = devm_ioremap_resource(dev, res); + if (IS_ERR(aspi->ahb_base)) { + dev_err(dev, "missing AHB mapping window\n"); + return PTR_ERR(aspi->ahb_base); + } + + aspi->ahb_window_size = resource_size(res); + aspi->ahb_base_phy = res->start; + + aspi->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(aspi->clk)) { + dev_err(dev, "missing clock\n"); + return PTR_ERR(aspi->clk); + } + + aspi->clk_freq = clk_get_rate(aspi->clk); + if (!aspi->clk_freq) { + dev_err(dev, "invalid clock\n"); + return -EINVAL; + } + + ret = clk_prepare_enable(aspi->clk); + if (ret) { + dev_err(dev, "can not enable the clock\n"); + return ret; + } + + /* IRQ is for DMA, which the driver doesn't support yet */ + + ctlr->mode_bits = SPI_RX_DUAL | SPI_TX_DUAL | data->mode_bits; + ctlr->bus_num = pdev->id; + ctlr->mem_ops = &aspeed_spi_mem_ops; + ctlr->setup = aspeed_spi_setup; + ctlr->cleanup = aspeed_spi_cleanup; + ctlr->num_chipselect = data->max_cs; + ctlr->dev.of_node = dev->of_node; + + ret = devm_spi_register_controller(dev, ctlr); + if (ret) { + dev_err(&pdev->dev, "spi_register_controller failed\n"); + goto disable_clk; + } + return 0; + +disable_clk: + clk_disable_unprepare(aspi->clk); + return ret; +} + +static int aspeed_spi_remove(struct platform_device *pdev) +{ + struct aspeed_spi *aspi = platform_get_drvdata(pdev); + + aspeed_spi_enable(aspi, false); + clk_disable_unprepare(aspi->clk); + return 0; +} + +/* + * AHB mappings + */ + +/* + * The Segment Registers of the AST2400 and AST2500 use a 8MB unit. + * The address range is encoded with absolute addresses in the overall + * mapping window. + */ +static u32 aspeed_spi_segment_start(struct aspeed_spi *aspi, u32 reg) +{ + return ((reg >> 16) & 0xFF) << 23; +} + +static u32 aspeed_spi_segment_end(struct aspeed_spi *aspi, u32 reg) +{ + return ((reg >> 24) & 0xFF) << 23; +} + +static u32 aspeed_spi_segment_reg(struct aspeed_spi *aspi, u32 start, u32 end) +{ + return (((start >> 23) & 0xFF) << 16) | (((end >> 23) & 0xFF) << 24); +} + +/* + * The Segment Registers of the AST2600 use a 1MB unit. The address + * range is encoded with offsets in the overall mapping window. + */ + +#define AST2600_SEG_ADDR_MASK 0x0ff00000 + +static u32 aspeed_spi_segment_ast2600_start(struct aspeed_spi *aspi, + u32 reg) +{ + u32 start_offset = (reg << 16) & AST2600_SEG_ADDR_MASK; + + return aspi->ahb_base_phy + start_offset; +} + +static u32 aspeed_spi_segment_ast2600_end(struct aspeed_spi *aspi, + u32 reg) +{ + u32 end_offset = reg & AST2600_SEG_ADDR_MASK; + + /* segment is disabled */ + if (!end_offset) + return aspi->ahb_base_phy; + + return aspi->ahb_base_phy + end_offset + 0x100000; +} + +static u32 aspeed_spi_segment_ast2600_reg(struct aspeed_spi *aspi, + u32 start, u32 end) +{ + /* disable zero size segments */ + if (start == end) + return 0; + + return ((start & AST2600_SEG_ADDR_MASK) >> 16) | + ((end - 1) & AST2600_SEG_ADDR_MASK); +} + +/* + * Platform definitions + */ +static const struct aspeed_spi_data ast2400_fmc_data = { + .max_cs = 5, + .hastype = true, + .we0 = 16, + .ctl0 = CE0_CTRL_REG, + .segment_start = aspeed_spi_segment_start, + .segment_end = aspeed_spi_segment_end, + .segment_reg = aspeed_spi_segment_reg, +}; + +static const struct aspeed_spi_data ast2500_fmc_data = { + .max_cs = 3, + .hastype = true, + .we0 = 16, + .ctl0 = CE0_CTRL_REG, + .segment_start = aspeed_spi_segment_start, + .segment_end = aspeed_spi_segment_end, + .segment_reg = aspeed_spi_segment_reg, +}; + +static const struct aspeed_spi_data ast2500_spi_data = { + .max_cs = 2, + .hastype = false, + .we0 = 16, + .ctl0 = CE0_CTRL_REG, + .segment_start = aspeed_spi_segment_start, + .segment_end = aspeed_spi_segment_end, + .segment_reg = aspeed_spi_segment_reg, +}; + +static const struct aspeed_spi_data ast2600_fmc_data = { + .max_cs = 3, + .hastype = false, + .mode_bits = SPI_RX_QUAD | SPI_RX_QUAD, + .we0 = 16, + .ctl0 = CE0_CTRL_REG, + .segment_start = aspeed_spi_segment_ast2600_start, + .segment_end = aspeed_spi_segment_ast2600_end, + .segment_reg = aspeed_spi_segment_ast2600_reg, +}; + +static const struct aspeed_spi_data ast2600_spi_data = { + .max_cs = 2, + .hastype = false, + .mode_bits = SPI_RX_QUAD | SPI_RX_QUAD, + .we0 = 16, + .ctl0 = CE0_CTRL_REG, + .segment_start = aspeed_spi_segment_ast2600_start, + .segment_end = aspeed_spi_segment_ast2600_end, + .segment_reg = aspeed_spi_segment_ast2600_reg, +}; + +static const struct of_device_id aspeed_spi_matches[] = { + { .compatible = "aspeed,ast2400-fmc", .data = &ast2400_fmc_data }, + { .compatible = "aspeed,ast2500-fmc", .data = &ast2500_fmc_data }, + { .compatible = "aspeed,ast2500-spi", .data = &ast2500_spi_data }, + { .compatible = "aspeed,ast2600-fmc", .data = &ast2600_fmc_data }, + { .compatible = "aspeed,ast2600-spi", .data = &ast2600_spi_data }, + { } +}; +MODULE_DEVICE_TABLE(of, aspeed_spi_matches); + +static struct platform_driver aspeed_spi_driver = { + .probe = aspeed_spi_probe, + .remove = aspeed_spi_remove, + .driver = { + .name = DEVICE_NAME, + .of_match_table = aspeed_spi_matches, + } +}; + +module_platform_driver(aspeed_spi_driver); + +MODULE_DESCRIPTION("ASPEED Static Memory Controller Driver"); +MODULE_AUTHOR("Chin-Ting Kuo "); +MODULE_AUTHOR("Cedric Le Goater "); +MODULE_LICENSE("GPL v2"); diff --git a/MAINTAINERS b/MAINTAINERS index 149e84d32293..fbad83094656 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3109,6 +3109,7 @@ L: openbmc@lists.ozlabs.org (moderated for non-subscribers) L: linux-spi@vger.kernel.org S: Maintained F: Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml +F: drivers/spi/spi-aspeed-smc.c ASPEED VIDEO ENGINE DRIVER M: Eddie James diff --git a/drivers/mtd/spi-nor/controllers/Kconfig b/drivers/mtd/spi-nor/controllers/Kconfig index 50f4f3484d42..ca45dcd3ffe8 100644 --- a/drivers/mtd/spi-nor/controllers/Kconfig +++ b/drivers/mtd/spi-nor/controllers/Kconfig @@ -1,14 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only -config SPI_ASPEED_SMC - tristate "Aspeed flash controllers in SPI mode" - depends on ARCH_ASPEED || COMPILE_TEST - depends on HAS_IOMEM && OF - help - This enables support for the Firmware Memory controller (FMC) - in the Aspeed AST2500/AST2400 SoCs when attached to SPI NOR chips, - and support for the SPI flash memory controller (SPI) for - the host firmware. The implementation only supports SPI NOR. - config SPI_HISI_SFC tristate "Hisilicon FMC SPI NOR Flash Controller(SFC)" depends on ARCH_HISI || COMPILE_TEST diff --git a/drivers/mtd/spi-nor/controllers/Makefile b/drivers/mtd/spi-nor/controllers/Makefile index 6e2a1dc68466..0b8e1d530913 100644 --- a/drivers/mtd/spi-nor/controllers/Makefile +++ b/drivers/mtd/spi-nor/controllers/Makefile @@ -1,4 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 -obj-$(CONFIG_SPI_ASPEED_SMC) += aspeed-smc.o obj-$(CONFIG_SPI_HISI_SFC) += hisi-sfc.o obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index d2815eb361c0..4a3b02ec4ba9 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -101,6 +101,17 @@ config SPI_ARMADA_3700 This enables support for the SPI controller present on the Marvell Armada 3700 SoCs. +config SPI_ASPEED_SMC + tristate "Aspeed flash controllers in SPI mode" + depends on ARCH_ASPEED || COMPILE_TEST + depends on OF + help + This enables support for the Firmware Memory controller (FMC) + in the Aspeed AST2600, AST2500 and AST2400 SoCs when attached + to SPI NOR chips, and support for the SPI flash memory + controller (SPI) for the host firmware. The implementation + only supports SPI NOR. + config SPI_ATMEL tristate "Atmel SPI Controller" depends on ARCH_AT91 || COMPILE_TEST diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 3aa28ed3f761..1566388b96ae 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_SPI_ALTERA_CORE) += spi-altera-core.o obj-$(CONFIG_SPI_ALTERA_DFL) += spi-altera-dfl.o obj-$(CONFIG_SPI_AR934X) += spi-ar934x.o obj-$(CONFIG_SPI_ARMADA_3700) += spi-armada-3700.o +obj-$(CONFIG_SPI_ASPEED_SMC) += spi-aspeed-smc.o obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o obj-$(CONFIG_SPI_ATMEL_QUADSPI) += atmel-quadspi.o obj-$(CONFIG_SPI_AT91_USART) += spi-at91-usart.o From patchwork Mon May 9 17:56:09 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?C=C3=A9dric_Le_Goater?= X-Patchwork-Id: 571185 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 59BC6C433FE for ; Mon, 9 May 2022 17:57:05 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239914AbiEISA6 (ORCPT ); Mon, 9 May 2022 14:00:58 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49216 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239899AbiEISAw (ORCPT ); Mon, 9 May 2022 14:00:52 -0400 Received: from gandalf.ozlabs.org (mail.ozlabs.org [IPv6:2404:9400:2221:ea00::3]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 11A4F19CB5B; Mon, 9 May 2022 10:56:57 -0700 (PDT) Received: from gandalf.ozlabs.org (gandalf.ozlabs.org [150.107.74.76]) by gandalf.ozlabs.org (Postfix) with ESMTP id 4KxplW564Hz4ySX; Tue, 10 May 2022 03:56:55 +1000 (AEST) Received: from authenticated.ozlabs.org (localhost [127.0.0.1]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by mail.ozlabs.org (Postfix) with ESMTPSA id 4KxplQ2qFdz4xVP; Tue, 10 May 2022 03:56:50 +1000 (AEST) From: =?utf-8?q?C=C3=A9dric_Le_Goater?= To: linux-spi@vger.kernel.org, linux-mtd@lists.infradead.org Cc: Mark Brown , Tudor Ambarus , Pratyush Yadav , Miquel Raynal , Richard Weinberger , Vignesh Raghavendra , linux-aspeed@lists.ozlabs.org, Joel Stanley , Andrew Jeffery , Chin-Ting Kuo , devicetree@vger.kernel.org, Rob Herring , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, =?utf-8?q?C=C3=A9dric_Le_Goater?= , Tao Ren , Jae Hyun Yoo Subject: [PATCH v7 04/11] spi: aspeed: Add support for direct mapping Date: Mon, 9 May 2022 19:56:09 +0200 Message-Id: <20220509175616.1089346-5-clg@kaod.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220509175616.1089346-1-clg@kaod.org> References: <20220509175616.1089346-1-clg@kaod.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org Use direct mapping to read the flash device contents. This operation mode is called "Command mode" on Aspeed SoC SMC controllers. It uses a Control Register for the settings to apply when a memory operation is performed on the flash device mapping window. If the window is not big enough, fall back to the "User mode" to perform the read. Direct mapping for writes will come later when validated. Reviewed-by: Joel Stanley Tested-by: Joel Stanley Tested-by: Tao Ren Tested-by: Jae Hyun Yoo Signed-off-by: Cédric Le Goater --- drivers/spi/spi-aspeed-smc.c | 68 ++++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) diff --git a/drivers/spi/spi-aspeed-smc.c b/drivers/spi/spi-aspeed-smc.c index cb5a0652e5a4..50cc7bd7ba3e 100644 --- a/drivers/spi/spi-aspeed-smc.c +++ b/drivers/spi/spi-aspeed-smc.c @@ -411,10 +411,78 @@ static int aspeed_spi_chip_set_default_window(struct aspeed_spi_chip *chip) return chip->ahb_window_size ? 0 : -1; } +static int aspeed_spi_dirmap_create(struct spi_mem_dirmap_desc *desc) +{ + struct aspeed_spi *aspi = spi_controller_get_devdata(desc->mem->spi->master); + struct aspeed_spi_chip *chip = &aspi->chips[desc->mem->spi->chip_select]; + struct spi_mem_op *op = &desc->info.op_tmpl; + u32 ctl_val; + int ret = 0; + + chip->clk_freq = desc->mem->spi->max_speed_hz; + + /* Only for reads */ + if (op->data.dir != SPI_MEM_DATA_IN) + return -EOPNOTSUPP; + + if (desc->info.length > chip->ahb_window_size) + dev_warn(aspi->dev, "CE%d window (%dMB) too small for mapping", + chip->cs, chip->ahb_window_size >> 20); + + /* Define the default IO read settings */ + ctl_val = readl(chip->ctl) & ~CTRL_IO_CMD_MASK; + ctl_val |= aspeed_spi_get_io_mode(op) | + op->cmd.opcode << CTRL_COMMAND_SHIFT | + CTRL_IO_DUMMY_SET(op->dummy.nbytes / op->dummy.buswidth) | + CTRL_IO_MODE_READ; + + /* Tune 4BYTE address mode */ + if (op->addr.nbytes) { + u32 addr_mode = readl(aspi->regs + CE_CTRL_REG); + + if (op->addr.nbytes == 4) + addr_mode |= (0x11 << chip->cs); + else + addr_mode &= ~(0x11 << chip->cs); + writel(addr_mode, aspi->regs + CE_CTRL_REG); + } + + /* READ mode is the controller default setting */ + chip->ctl_val[ASPEED_SPI_READ] = ctl_val; + writel(chip->ctl_val[ASPEED_SPI_READ], chip->ctl); + + dev_info(aspi->dev, "CE%d read buswidth:%d [0x%08x]\n", + chip->cs, op->data.buswidth, chip->ctl_val[ASPEED_SPI_READ]); + + return ret; +} + +static ssize_t aspeed_spi_dirmap_read(struct spi_mem_dirmap_desc *desc, + u64 offset, size_t len, void *buf) +{ + struct aspeed_spi *aspi = spi_controller_get_devdata(desc->mem->spi->master); + struct aspeed_spi_chip *chip = &aspi->chips[desc->mem->spi->chip_select]; + + /* Switch to USER command mode if mapping window is too small */ + if (chip->ahb_window_size < offset + len) { + int ret; + + ret = aspeed_spi_read_user(chip, &desc->info.op_tmpl, offset, len, buf); + if (ret < 0) + return ret; + } else { + memcpy_fromio(buf, chip->ahb_base + offset, len); + } + + return len; +} + static const struct spi_controller_mem_ops aspeed_spi_mem_ops = { .supports_op = aspeed_spi_supports_op, .exec_op = aspeed_spi_exec_op, .get_name = aspeed_spi_get_name, + .dirmap_create = aspeed_spi_dirmap_create, + .dirmap_read = aspeed_spi_dirmap_read, }; static void aspeed_spi_chip_set_type(struct aspeed_spi *aspi, unsigned int cs, int type) From patchwork Mon May 9 17:56:10 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?C=C3=A9dric_Le_Goater?= X-Patchwork-Id: 572011 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 629F7C433FE for ; Mon, 9 May 2022 17:57:22 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239926AbiEISBO (ORCPT ); Mon, 9 May 2022 14:01:14 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49654 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239921AbiEISBA (ORCPT ); Mon, 9 May 2022 14:01:00 -0400 Received: from gandalf.ozlabs.org (gandalf.ozlabs.org [150.107.74.76]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id DBEC01A15DF; Mon, 9 May 2022 10:57:02 -0700 (PDT) Received: from gandalf.ozlabs.org (gandalf.ozlabs.org [150.107.74.76]) by gandalf.ozlabs.org (Postfix) with ESMTP id 4Kxpld4J6jz4ySZ; Tue, 10 May 2022 03:57:01 +1000 (AEST) Received: from authenticated.ozlabs.org (localhost [127.0.0.1]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by mail.ozlabs.org (Postfix) with ESMTPSA id 4KxplX1mjLz4xVP; Tue, 10 May 2022 03:56:55 +1000 (AEST) From: =?utf-8?q?C=C3=A9dric_Le_Goater?= To: linux-spi@vger.kernel.org, linux-mtd@lists.infradead.org Cc: Mark Brown , Tudor Ambarus , Pratyush Yadav , Miquel Raynal , Richard Weinberger , Vignesh Raghavendra , linux-aspeed@lists.ozlabs.org, Joel Stanley , Andrew Jeffery , Chin-Ting Kuo , devicetree@vger.kernel.org, Rob Herring , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, =?utf-8?q?C=C3=A9dric_Le_Goater?= , Tao Ren , Jae Hyun Yoo Subject: [PATCH v7 05/11] spi: aspeed: Adjust direct mapping to device size Date: Mon, 9 May 2022 19:56:10 +0200 Message-Id: <20220509175616.1089346-6-clg@kaod.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220509175616.1089346-1-clg@kaod.org> References: <20220509175616.1089346-1-clg@kaod.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org The segment registers of the FMC/SPI controllers provide a way to configure the mapping window of the flash device contents on the AHB bus. Adjust this window to the size of the spi-mem mapping. Things get more complex with multiple devices. The driver needs to also adjust the window of the next device to make sure that there is no overlap, even if there is no available device. The proposal below is not perfect but it is covering all the cases we have seen on different boards with one and two devices on the same bus. Reviewed-by: Joel Stanley Tested-by: Joel Stanley Tested-by: Tao Ren Tested-by: Jae Hyun Yoo Signed-off-by: Cédric Le Goater --- drivers/spi/spi-aspeed-smc.c | 88 ++++++++++++++++++++++++++++++++++++ 1 file changed, 88 insertions(+) diff --git a/drivers/spi/spi-aspeed-smc.c b/drivers/spi/spi-aspeed-smc.c index 50cc7bd7ba3e..0aff42e20b8d 100644 --- a/drivers/spi/spi-aspeed-smc.c +++ b/drivers/spi/spi-aspeed-smc.c @@ -411,6 +411,92 @@ static int aspeed_spi_chip_set_default_window(struct aspeed_spi_chip *chip) return chip->ahb_window_size ? 0 : -1; } +static int aspeed_spi_set_window(struct aspeed_spi *aspi, + const struct aspeed_spi_window *win) +{ + u32 start = aspi->ahb_base_phy + win->offset; + u32 end = start + win->size; + void __iomem *seg_reg = aspi->regs + CE0_SEGMENT_ADDR_REG + win->cs * 4; + u32 seg_val_backup = readl(seg_reg); + u32 seg_val = aspi->data->segment_reg(aspi, start, end); + + if (seg_val == seg_val_backup) + return 0; + + writel(seg_val, seg_reg); + + /* + * Restore initial value if something goes wrong else we could + * loose access to the chip. + */ + if (seg_val != readl(seg_reg)) { + dev_err(aspi->dev, "CE%d invalid window [ 0x%.8x - 0x%.8x ] %dMB", + win->cs, start, end - 1, win->size >> 20); + writel(seg_val_backup, seg_reg); + return -EIO; + } + + if (win->size) + dev_dbg(aspi->dev, "CE%d new window [ 0x%.8x - 0x%.8x ] %dMB", + win->cs, start, end - 1, win->size >> 20); + else + dev_dbg(aspi->dev, "CE%d window closed", win->cs); + + return 0; +} + +/* + * Yet to be done when possible : + * - Align mappings on flash size (we don't have the info) + * - ioremap each window, not strictly necessary since the overall window + * is correct. + */ +static int aspeed_spi_chip_adjust_window(struct aspeed_spi_chip *chip, + u32 local_offset, u32 size) +{ + struct aspeed_spi *aspi = chip->aspi; + struct aspeed_spi_window windows[ASPEED_SPI_MAX_NUM_CS] = { 0 }; + struct aspeed_spi_window *win = &windows[chip->cs]; + int ret; + + aspeed_spi_get_windows(aspi, windows); + + /* Adjust this chip window */ + win->offset += local_offset; + win->size = size; + + if (win->offset + win->size > aspi->ahb_window_size) { + win->size = aspi->ahb_window_size - win->offset; + dev_warn(aspi->dev, "CE%d window resized to %dMB", chip->cs, win->size >> 20); + } + + ret = aspeed_spi_set_window(aspi, win); + if (ret) + return ret; + + /* Update chip mapping info */ + chip->ahb_base = aspi->ahb_base + win->offset; + chip->ahb_window_size = win->size; + + /* + * Also adjust next chip window to make sure that it does not + * overlap with the current window. + */ + if (chip->cs < aspi->data->max_cs - 1) { + struct aspeed_spi_window *next = &windows[chip->cs + 1]; + + /* Change offset and size to keep the same end address */ + if ((next->offset + next->size) > (win->offset + win->size)) + next->size = (next->offset + next->size) - (win->offset + win->size); + else + next->size = 0; + next->offset = win->offset + win->size; + + aspeed_spi_set_window(aspi, next); + } + return 0; +} + static int aspeed_spi_dirmap_create(struct spi_mem_dirmap_desc *desc) { struct aspeed_spi *aspi = spi_controller_get_devdata(desc->mem->spi->master); @@ -425,6 +511,8 @@ static int aspeed_spi_dirmap_create(struct spi_mem_dirmap_desc *desc) if (op->data.dir != SPI_MEM_DATA_IN) return -EOPNOTSUPP; + aspeed_spi_chip_adjust_window(chip, desc->info.offset, desc->info.length); + if (desc->info.length > chip->ahb_window_size) dev_warn(aspi->dev, "CE%d window (%dMB) too small for mapping", chip->cs, chip->ahb_window_size >> 20); From patchwork Mon May 9 17:56:11 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?C=C3=A9dric_Le_Goater?= X-Patchwork-Id: 571184 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id E32BBC433F5 for ; Mon, 9 May 2022 17:57:22 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239890AbiEISBP (ORCPT ); Mon, 9 May 2022 14:01:15 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:50108 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239864AbiEISBG (ORCPT ); Mon, 9 May 2022 14:01:06 -0400 Received: from gandalf.ozlabs.org (mail.ozlabs.org [IPv6:2404:9400:2221:ea00::3]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C404F1BC829; Mon, 9 May 2022 10:57:08 -0700 (PDT) Received: from gandalf.ozlabs.org (mail.ozlabs.org [IPv6:2404:9400:2221:ea00::3]) by gandalf.ozlabs.org (Postfix) with ESMTP id 4Kxpll3MQlz4ySW; Tue, 10 May 2022 03:57:07 +1000 (AEST) Received: from authenticated.ozlabs.org (localhost [127.0.0.1]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by mail.ozlabs.org (Postfix) with ESMTPSA id 4Kxplf0zxWz4xVP; Tue, 10 May 2022 03:57:01 +1000 (AEST) From: =?utf-8?q?C=C3=A9dric_Le_Goater?= To: linux-spi@vger.kernel.org, linux-mtd@lists.infradead.org Cc: Mark Brown , Tudor Ambarus , Pratyush Yadav , Miquel Raynal , Richard Weinberger , Vignesh Raghavendra , linux-aspeed@lists.ozlabs.org, Joel Stanley , Andrew Jeffery , Chin-Ting Kuo , devicetree@vger.kernel.org, Rob Herring , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, =?utf-8?q?C=C3=A9dric_Le_Goater?= , Tao Ren , Jae Hyun Yoo Subject: [PATCH v7 06/11] spi: aspeed: Workaround AST2500 limitations Date: Mon, 9 May 2022 19:56:11 +0200 Message-Id: <20220509175616.1089346-7-clg@kaod.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220509175616.1089346-1-clg@kaod.org> References: <20220509175616.1089346-1-clg@kaod.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org It is not possible to configure a full 128MB window for a chip of the same size on the AST2500 SPI controller. For this case, the maximum window size is restricted to 120MB for CE0. Reviewed-by: Joel Stanley Tested-by: Joel Stanley Tested-by: Tao Ren Tested-by: Jae Hyun Yoo Signed-off-by: Cédric Le Goater --- drivers/spi/spi-aspeed-smc.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/spi/spi-aspeed-smc.c b/drivers/spi/spi-aspeed-smc.c index 0aff42e20b8d..d2b3342c133e 100644 --- a/drivers/spi/spi-aspeed-smc.c +++ b/drivers/spi/spi-aspeed-smc.c @@ -451,6 +451,8 @@ static int aspeed_spi_set_window(struct aspeed_spi *aspi, * - ioremap each window, not strictly necessary since the overall window * is correct. */ +static const struct aspeed_spi_data ast2500_spi_data; + static int aspeed_spi_chip_adjust_window(struct aspeed_spi_chip *chip, u32 local_offset, u32 size) { @@ -459,6 +461,16 @@ static int aspeed_spi_chip_adjust_window(struct aspeed_spi_chip *chip, struct aspeed_spi_window *win = &windows[chip->cs]; int ret; + /* + * Due to an HW issue on the AST2500 SPI controller, the CE0 + * window size should be smaller than the maximum 128MB. + */ + if (aspi->data == &ast2500_spi_data && chip->cs == 0 && size == SZ_128M) { + size = 120 << 20; + dev_info(aspi->dev, "CE%d window resized to %dMB (AST2500 HW quirk)", + chip->cs, size >> 20); + } + aspeed_spi_get_windows(aspi, windows); /* Adjust this chip window */ From patchwork Mon May 9 17:56:12 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?C=C3=A9dric_Le_Goater?= X-Patchwork-Id: 572010 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 832E4C433FE for ; Mon, 9 May 2022 17:57:25 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239934AbiEISBQ (ORCPT ); Mon, 9 May 2022 14:01:16 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:50352 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239879AbiEISBJ (ORCPT ); Mon, 9 May 2022 14:01:09 -0400 Received: from gandalf.ozlabs.org (gandalf.ozlabs.org [150.107.74.76]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8DD131B3BA3; Mon, 9 May 2022 10:57:14 -0700 (PDT) Received: from gandalf.ozlabs.org (gandalf.ozlabs.org [150.107.74.76]) by gandalf.ozlabs.org (Postfix) with ESMTP id 4Kxpls2Hj9z4xcY; Tue, 10 May 2022 03:57:13 +1000 (AEST) Received: from authenticated.ozlabs.org (localhost [127.0.0.1]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by mail.ozlabs.org (Postfix) with ESMTPSA id 4Kxpll75TKz4xVP; Tue, 10 May 2022 03:57:07 +1000 (AEST) From: =?utf-8?q?C=C3=A9dric_Le_Goater?= To: linux-spi@vger.kernel.org, linux-mtd@lists.infradead.org Cc: Mark Brown , Tudor Ambarus , Pratyush Yadav , Miquel Raynal , Richard Weinberger , Vignesh Raghavendra , linux-aspeed@lists.ozlabs.org, Joel Stanley , Andrew Jeffery , Chin-Ting Kuo , devicetree@vger.kernel.org, Rob Herring , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, =?utf-8?q?C=C3=A9dric_Le_Goater?= , Tao Ren , Jae Hyun Yoo Subject: [PATCH v7 07/11] spi: aspeed: Add support for the AST2400 SPI controller Date: Mon, 9 May 2022 19:56:12 +0200 Message-Id: <20220509175616.1089346-8-clg@kaod.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220509175616.1089346-1-clg@kaod.org> References: <20220509175616.1089346-1-clg@kaod.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org Extend the driver for the AST2400 SPI Flash Controller (SPI). This controller has a slightly different interface which requires adaptation of the 4B handling. Summary of features : . host Firmware . 1 chip select pin (CE0) . slightly different register set, between AST2500 and the legacy controller . no segment registers . single, dual mode. Reviewed-by: Joel Stanley Tested-by: Joel Stanley Tested-by: Tao Ren Tested-by: Jae Hyun Yoo Signed-off-by: Cédric Le Goater --- drivers/spi/spi-aspeed-smc.c | 33 ++++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-aspeed-smc.c b/drivers/spi/spi-aspeed-smc.c index d2b3342c133e..d2b63c8bb88f 100644 --- a/drivers/spi/spi-aspeed-smc.c +++ b/drivers/spi/spi-aspeed-smc.c @@ -30,6 +30,7 @@ #define CTRL_IO_DUAL_DATA BIT(29) #define CTRL_IO_QUAD_DATA BIT(30) #define CTRL_COMMAND_SHIFT 16 +#define CTRL_IO_ADDRESS_4B BIT(13) /* AST2400 SPI only */ #define CTRL_IO_DUMMY_SET(dummy) \ (((((dummy) >> 2) & 0x1) << 14) | (((dummy) & 0x3) << 6)) #define CTRL_CE_STOP_ACTIVE BIT(2) @@ -280,6 +281,8 @@ static bool aspeed_spi_supports_op(struct spi_mem *mem, const struct spi_mem_op return spi_mem_default_supports_op(mem, op); } +static const struct aspeed_spi_data ast2400_spi_data; + static int do_aspeed_spi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) { struct aspeed_spi *aspi = spi_controller_get_devdata(mem->spi->master); @@ -309,6 +312,9 @@ static int do_aspeed_spi_exec_op(struct spi_mem *mem, const struct spi_mem_op *o addr_mode |= (0x11 << chip->cs); else addr_mode &= ~(0x11 << chip->cs); + + if (op->addr.nbytes == 4 && chip->aspi->data == &ast2400_spi_data) + ctl_val |= CTRL_IO_ADDRESS_4B; } if (op->dummy.nbytes) @@ -398,7 +404,13 @@ static int aspeed_spi_chip_set_default_window(struct aspeed_spi_chip *chip) struct aspeed_spi_window windows[ASPEED_SPI_MAX_NUM_CS] = { 0 }; struct aspeed_spi_window *win = &windows[chip->cs]; - aspeed_spi_get_windows(aspi, windows); + /* No segment registers for the AST2400 SPI controller */ + if (aspi->data == &ast2400_spi_data) { + win->offset = 0; + win->size = aspi->ahb_window_size; + } else { + aspeed_spi_get_windows(aspi, windows); + } chip->ahb_base = aspi->ahb_base + win->offset; chip->ahb_window_size = win->size; @@ -461,6 +473,10 @@ static int aspeed_spi_chip_adjust_window(struct aspeed_spi_chip *chip, struct aspeed_spi_window *win = &windows[chip->cs]; int ret; + /* No segment registers for the AST2400 SPI controller */ + if (aspi->data == &ast2400_spi_data) + return 0; + /* * Due to an HW issue on the AST2500 SPI controller, the CE0 * window size should be smaller than the maximum 128MB. @@ -545,6 +561,12 @@ static int aspeed_spi_dirmap_create(struct spi_mem_dirmap_desc *desc) else addr_mode &= ~(0x11 << chip->cs); writel(addr_mode, aspi->regs + CE_CTRL_REG); + + /* AST2400 SPI controller sets 4BYTE address mode in + * CE0 Control Register + */ + if (op->addr.nbytes == 4 && chip->aspi->data == &ast2400_spi_data) + ctl_val |= CTRL_IO_ADDRESS_4B; } /* READ mode is the controller default setting */ @@ -816,6 +838,14 @@ static const struct aspeed_spi_data ast2400_fmc_data = { .segment_reg = aspeed_spi_segment_reg, }; +static const struct aspeed_spi_data ast2400_spi_data = { + .max_cs = 1, + .hastype = false, + .we0 = 0, + .ctl0 = 0x04, + /* No segment registers */ +}; + static const struct aspeed_spi_data ast2500_fmc_data = { .max_cs = 3, .hastype = true, @@ -860,6 +890,7 @@ static const struct aspeed_spi_data ast2600_spi_data = { static const struct of_device_id aspeed_spi_matches[] = { { .compatible = "aspeed,ast2400-fmc", .data = &ast2400_fmc_data }, + { .compatible = "aspeed,ast2400-spi", .data = &ast2400_spi_data }, { .compatible = "aspeed,ast2500-fmc", .data = &ast2500_fmc_data }, { .compatible = "aspeed,ast2500-spi", .data = &ast2500_spi_data }, { .compatible = "aspeed,ast2600-fmc", .data = &ast2600_fmc_data }, From patchwork Mon May 9 17:56:13 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?C=C3=A9dric_Le_Goater?= X-Patchwork-Id: 571183 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 772FFC433F5 for ; Mon, 9 May 2022 17:57:27 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239921AbiEISBT (ORCPT ); Mon, 9 May 2022 14:01:19 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:51036 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239935AbiEISBQ (ORCPT ); Mon, 9 May 2022 14:01:16 -0400 Received: from gandalf.ozlabs.org (mail.ozlabs.org [IPv6:2404:9400:2221:ea00::3]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 6CDCE1B33E2; Mon, 9 May 2022 10:57:20 -0700 (PDT) Received: from gandalf.ozlabs.org (gandalf.ozlabs.org [150.107.74.76]) by gandalf.ozlabs.org (Postfix) with ESMTP id 4Kxplz1829z4ySZ; Tue, 10 May 2022 03:57:19 +1000 (AEST) Received: from authenticated.ozlabs.org (localhost [127.0.0.1]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by mail.ozlabs.org (Postfix) with ESMTPSA id 4Kxpls5wzLz4xVP; Tue, 10 May 2022 03:57:13 +1000 (AEST) From: =?utf-8?q?C=C3=A9dric_Le_Goater?= To: linux-spi@vger.kernel.org, linux-mtd@lists.infradead.org Cc: Mark Brown , Tudor Ambarus , Pratyush Yadav , Miquel Raynal , Richard Weinberger , Vignesh Raghavendra , linux-aspeed@lists.ozlabs.org, Joel Stanley , Andrew Jeffery , Chin-Ting Kuo , devicetree@vger.kernel.org, Rob Herring , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, =?utf-8?q?C=C3=A9dric_Le_Goater?= , Tao Ren , Jae Hyun Yoo Subject: [PATCH v7 08/11] spi: aspeed: Calibrate read timings Date: Mon, 9 May 2022 19:56:13 +0200 Message-Id: <20220509175616.1089346-9-clg@kaod.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220509175616.1089346-1-clg@kaod.org> References: <20220509175616.1089346-1-clg@kaod.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org To accommodate the different response time of SPI transfers on different boards and different SPI NOR devices, the Aspeed controllers provide a set of Read Timing Compensation registers to tune the timing delays depending on the frequency being used. The AST2600 SoC has one of these registers per device. On the AST2500 and AST2400 SoCs, the timing register is shared by all devices which is problematic to get good results other than for one device. The algorithm first reads a golden buffer at low speed and then performs reads with different clocks and delay cycle settings to find a breaking point. This selects a default good frequency for the CEx control register. The current settings are a bit optimistic as we pick the first delay giving good results. A safer approach would be to determine an interval and choose the middle value. Calibration is performed when the direct mapping for reads is created. Since the underlying spi-nor object needs to be initialized to create the spi_mem operation for direct mapping, we should be fine. Having a specific API would clarify the requirements though. Cc: Pratyush Yadav Reviewed-by: Joel Stanley Tested-by: Joel Stanley Tested-by: Tao Ren Tested-by: Jae Hyun Yoo Signed-off-by: Cédric Le Goater --- drivers/spi/spi-aspeed-smc.c | 281 +++++++++++++++++++++++++++++++++++ 1 file changed, 281 insertions(+) diff --git a/drivers/spi/spi-aspeed-smc.c b/drivers/spi/spi-aspeed-smc.c index d2b63c8bb88f..35f6934847b7 100644 --- a/drivers/spi/spi-aspeed-smc.c +++ b/drivers/spi/spi-aspeed-smc.c @@ -33,6 +33,8 @@ #define CTRL_IO_ADDRESS_4B BIT(13) /* AST2400 SPI only */ #define CTRL_IO_DUMMY_SET(dummy) \ (((((dummy) >> 2) & 0x1) << 14) | (((dummy) & 0x3) << 6)) +#define CTRL_FREQ_SEL_SHIFT 8 +#define CTRL_FREQ_SEL_MASK GENMASK(11, CTRL_FREQ_SEL_SHIFT) #define CTRL_CE_STOP_ACTIVE BIT(2) #define CTRL_IO_MODE_CMD_MASK GENMASK(1, 0) #define CTRL_IO_MODE_NORMAL 0x0 @@ -45,6 +47,9 @@ /* CEx Address Decoding Range Register */ #define CE0_SEGMENT_ADDR_REG 0x30 +/* CEx Read timing compensation register */ +#define CE0_TIMING_COMPENSATION_REG 0x94 + enum aspeed_spi_ctl_reg_value { ASPEED_SPI_BASE, ASPEED_SPI_READ, @@ -70,10 +75,15 @@ struct aspeed_spi_data { bool hastype; u32 mode_bits; u32 we0; + u32 timing; + u32 hclk_mask; + u32 hdiv_max; u32 (*segment_start)(struct aspeed_spi *aspi, u32 reg); u32 (*segment_end)(struct aspeed_spi *aspi, u32 reg); u32 (*segment_reg)(struct aspeed_spi *aspi, u32 start, u32 end); + int (*calibrate)(struct aspeed_spi_chip *chip, u32 hdiv, + const u8 *golden_buf, u8 *test_buf); }; #define ASPEED_SPI_MAX_NUM_CS 5 @@ -525,6 +535,8 @@ static int aspeed_spi_chip_adjust_window(struct aspeed_spi_chip *chip, return 0; } +static int aspeed_spi_do_calibration(struct aspeed_spi_chip *chip); + static int aspeed_spi_dirmap_create(struct spi_mem_dirmap_desc *desc) { struct aspeed_spi *aspi = spi_controller_get_devdata(desc->mem->spi->master); @@ -573,6 +585,8 @@ static int aspeed_spi_dirmap_create(struct spi_mem_dirmap_desc *desc) chip->ctl_val[ASPEED_SPI_READ] = ctl_val; writel(chip->ctl_val[ASPEED_SPI_READ], chip->ctl); + ret = aspeed_spi_do_calibration(chip); + dev_info(aspi->dev, "CE%d read buswidth:%d [0x%08x]\n", chip->cs, op->data.buswidth, chip->ctl_val[ASPEED_SPI_READ]); @@ -825,6 +839,249 @@ static u32 aspeed_spi_segment_ast2600_reg(struct aspeed_spi *aspi, ((end - 1) & AST2600_SEG_ADDR_MASK); } +/* + * Read timing compensation sequences + */ + +#define CALIBRATE_BUF_SIZE SZ_16K + +static bool aspeed_spi_check_reads(struct aspeed_spi_chip *chip, + const u8 *golden_buf, u8 *test_buf) +{ + int i; + + for (i = 0; i < 10; i++) { + memcpy_fromio(test_buf, chip->ahb_base, CALIBRATE_BUF_SIZE); + if (memcmp(test_buf, golden_buf, CALIBRATE_BUF_SIZE) != 0) { +#if defined(VERBOSE_DEBUG) + print_hex_dump_bytes(DEVICE_NAME " fail: ", DUMP_PREFIX_NONE, + test_buf, 0x100); +#endif + return false; + } + } + return true; +} + +#define FREAD_TPASS(i) (((i) / 2) | (((i) & 1) ? 0 : 8)) + +/* + * The timing register is shared by all devices. Only update for CE0. + */ +static int aspeed_spi_calibrate(struct aspeed_spi_chip *chip, u32 hdiv, + const u8 *golden_buf, u8 *test_buf) +{ + struct aspeed_spi *aspi = chip->aspi; + const struct aspeed_spi_data *data = aspi->data; + int i; + int good_pass = -1, pass_count = 0; + u32 shift = (hdiv - 1) << 2; + u32 mask = ~(0xfu << shift); + u32 fread_timing_val = 0; + + /* Try HCLK delay 0..5, each one with/without delay and look for a + * good pair. + */ + for (i = 0; i < 12; i++) { + bool pass; + + if (chip->cs == 0) { + fread_timing_val &= mask; + fread_timing_val |= FREAD_TPASS(i) << shift; + writel(fread_timing_val, aspi->regs + data->timing); + } + pass = aspeed_spi_check_reads(chip, golden_buf, test_buf); + dev_dbg(aspi->dev, + " * [%08x] %d HCLK delay, %dns DI delay : %s", + fread_timing_val, i / 2, (i & 1) ? 0 : 4, + pass ? "PASS" : "FAIL"); + if (pass) { + pass_count++; + if (pass_count == 3) { + good_pass = i - 1; + break; + } + } else { + pass_count = 0; + } + } + + /* No good setting for this frequency */ + if (good_pass < 0) + return -1; + + /* We have at least one pass of margin, let's use first pass */ + if (chip->cs == 0) { + fread_timing_val &= mask; + fread_timing_val |= FREAD_TPASS(good_pass) << shift; + writel(fread_timing_val, aspi->regs + data->timing); + } + dev_dbg(aspi->dev, " * -> good is pass %d [0x%08x]", + good_pass, fread_timing_val); + return 0; +} + +static bool aspeed_spi_check_calib_data(const u8 *test_buf, u32 size) +{ + const u32 *tb32 = (const u32 *)test_buf; + u32 i, cnt = 0; + + /* We check if we have enough words that are neither all 0 + * nor all 1's so the calibration can be considered valid. + * + * I use an arbitrary threshold for now of 64 + */ + size >>= 2; + for (i = 0; i < size; i++) { + if (tb32[i] != 0 && tb32[i] != 0xffffffff) + cnt++; + } + return cnt >= 64; +} + +static const u32 aspeed_spi_hclk_divs[] = { + 0xf, /* HCLK */ + 0x7, /* HCLK/2 */ + 0xe, /* HCLK/3 */ + 0x6, /* HCLK/4 */ + 0xd, /* HCLK/5 */ +}; + +#define ASPEED_SPI_HCLK_DIV(i) \ + (aspeed_spi_hclk_divs[(i) - 1] << CTRL_FREQ_SEL_SHIFT) + +static int aspeed_spi_do_calibration(struct aspeed_spi_chip *chip) +{ + struct aspeed_spi *aspi = chip->aspi; + const struct aspeed_spi_data *data = aspi->data; + u32 ahb_freq = aspi->clk_freq; + u32 max_freq = chip->clk_freq; + u32 ctl_val; + u8 *golden_buf = NULL; + u8 *test_buf = NULL; + int i, rc, best_div = -1; + + dev_dbg(aspi->dev, "calculate timing compensation - AHB freq: %d MHz", + ahb_freq / 1000000); + + /* + * use the related low frequency to get check calibration data + * and get golden data. + */ + ctl_val = chip->ctl_val[ASPEED_SPI_READ] & data->hclk_mask; + writel(ctl_val, chip->ctl); + + test_buf = kzalloc(CALIBRATE_BUF_SIZE * 2, GFP_KERNEL); + if (!test_buf) + return -ENOMEM; + + golden_buf = test_buf + CALIBRATE_BUF_SIZE; + + memcpy_fromio(golden_buf, chip->ahb_base, CALIBRATE_BUF_SIZE); + if (!aspeed_spi_check_calib_data(golden_buf, CALIBRATE_BUF_SIZE)) { + dev_info(aspi->dev, "Calibration area too uniform, using low speed"); + goto no_calib; + } + +#if defined(VERBOSE_DEBUG) + print_hex_dump_bytes(DEVICE_NAME " good: ", DUMP_PREFIX_NONE, + golden_buf, 0x100); +#endif + + /* Now we iterate the HCLK dividers until we find our breaking point */ + for (i = ARRAY_SIZE(aspeed_spi_hclk_divs); i > data->hdiv_max - 1; i--) { + u32 tv, freq; + + freq = ahb_freq / i; + if (freq > max_freq) + continue; + + /* Set the timing */ + tv = chip->ctl_val[ASPEED_SPI_READ] | ASPEED_SPI_HCLK_DIV(i); + writel(tv, chip->ctl); + dev_dbg(aspi->dev, "Trying HCLK/%d [%08x] ...", i, tv); + rc = data->calibrate(chip, i, golden_buf, test_buf); + if (rc == 0) + best_div = i; + } + + /* Nothing found ? */ + if (best_div < 0) { + dev_warn(aspi->dev, "No good frequency, using dumb slow"); + } else { + dev_dbg(aspi->dev, "Found good read timings at HCLK/%d", best_div); + + /* Record the freq */ + for (i = 0; i < ASPEED_SPI_MAX; i++) + chip->ctl_val[i] = (chip->ctl_val[i] & data->hclk_mask) | + ASPEED_SPI_HCLK_DIV(best_div); + } + +no_calib: + writel(chip->ctl_val[ASPEED_SPI_READ], chip->ctl); + kfree(test_buf); + return 0; +} + +#define TIMING_DELAY_DI BIT(3) +#define TIMING_DELAY_HCYCLE_MAX 5 +#define TIMING_REG_AST2600(chip) \ + ((chip)->aspi->regs + (chip)->aspi->data->timing + \ + (chip)->cs * 4) + +static int aspeed_spi_ast2600_calibrate(struct aspeed_spi_chip *chip, u32 hdiv, + const u8 *golden_buf, u8 *test_buf) +{ + struct aspeed_spi *aspi = chip->aspi; + int hcycle; + u32 shift = (hdiv - 2) << 3; + u32 mask = ~(0xfu << shift); + u32 fread_timing_val = 0; + + for (hcycle = 0; hcycle <= TIMING_DELAY_HCYCLE_MAX; hcycle++) { + int delay_ns; + bool pass = false; + + fread_timing_val &= mask; + fread_timing_val |= hcycle << shift; + + /* no DI input delay first */ + writel(fread_timing_val, TIMING_REG_AST2600(chip)); + pass = aspeed_spi_check_reads(chip, golden_buf, test_buf); + dev_dbg(aspi->dev, + " * [%08x] %d HCLK delay, DI delay none : %s", + fread_timing_val, hcycle, pass ? "PASS" : "FAIL"); + if (pass) + return 0; + + /* Add DI input delays */ + fread_timing_val &= mask; + fread_timing_val |= (TIMING_DELAY_DI | hcycle) << shift; + + for (delay_ns = 0; delay_ns < 0x10; delay_ns++) { + fread_timing_val &= ~(0xf << (4 + shift)); + fread_timing_val |= delay_ns << (4 + shift); + + writel(fread_timing_val, TIMING_REG_AST2600(chip)); + pass = aspeed_spi_check_reads(chip, golden_buf, test_buf); + dev_dbg(aspi->dev, + " * [%08x] %d HCLK delay, DI delay %d.%dns : %s", + fread_timing_val, hcycle, (delay_ns + 1) / 2, + (delay_ns + 1) & 1 ? 5 : 5, pass ? "PASS" : "FAIL"); + /* + * TODO: This is optimistic. We should look + * for a working interval and save the middle + * value in the read timing register. + */ + if (pass) + return 0; + } + } + + /* No good setting for this frequency */ + return -1; +} + /* * Platform definitions */ @@ -833,6 +1090,10 @@ static const struct aspeed_spi_data ast2400_fmc_data = { .hastype = true, .we0 = 16, .ctl0 = CE0_CTRL_REG, + .timing = CE0_TIMING_COMPENSATION_REG, + .hclk_mask = 0xfffff0ff, + .hdiv_max = 1, + .calibrate = aspeed_spi_calibrate, .segment_start = aspeed_spi_segment_start, .segment_end = aspeed_spi_segment_end, .segment_reg = aspeed_spi_segment_reg, @@ -843,6 +1104,10 @@ static const struct aspeed_spi_data ast2400_spi_data = { .hastype = false, .we0 = 0, .ctl0 = 0x04, + .timing = 0x14, + .hclk_mask = 0xfffff0ff, + .hdiv_max = 1, + .calibrate = aspeed_spi_calibrate, /* No segment registers */ }; @@ -851,6 +1116,10 @@ static const struct aspeed_spi_data ast2500_fmc_data = { .hastype = true, .we0 = 16, .ctl0 = CE0_CTRL_REG, + .timing = CE0_TIMING_COMPENSATION_REG, + .hclk_mask = 0xffffd0ff, + .hdiv_max = 1, + .calibrate = aspeed_spi_calibrate, .segment_start = aspeed_spi_segment_start, .segment_end = aspeed_spi_segment_end, .segment_reg = aspeed_spi_segment_reg, @@ -861,6 +1130,10 @@ static const struct aspeed_spi_data ast2500_spi_data = { .hastype = false, .we0 = 16, .ctl0 = CE0_CTRL_REG, + .timing = CE0_TIMING_COMPENSATION_REG, + .hclk_mask = 0xffffd0ff, + .hdiv_max = 1, + .calibrate = aspeed_spi_calibrate, .segment_start = aspeed_spi_segment_start, .segment_end = aspeed_spi_segment_end, .segment_reg = aspeed_spi_segment_reg, @@ -872,6 +1145,10 @@ static const struct aspeed_spi_data ast2600_fmc_data = { .mode_bits = SPI_RX_QUAD | SPI_RX_QUAD, .we0 = 16, .ctl0 = CE0_CTRL_REG, + .timing = CE0_TIMING_COMPENSATION_REG, + .hclk_mask = 0xf0fff0ff, + .hdiv_max = 2, + .calibrate = aspeed_spi_ast2600_calibrate, .segment_start = aspeed_spi_segment_ast2600_start, .segment_end = aspeed_spi_segment_ast2600_end, .segment_reg = aspeed_spi_segment_ast2600_reg, @@ -883,6 +1160,10 @@ static const struct aspeed_spi_data ast2600_spi_data = { .mode_bits = SPI_RX_QUAD | SPI_RX_QUAD, .we0 = 16, .ctl0 = CE0_CTRL_REG, + .timing = CE0_TIMING_COMPENSATION_REG, + .hclk_mask = 0xf0fff0ff, + .hdiv_max = 2, + .calibrate = aspeed_spi_ast2600_calibrate, .segment_start = aspeed_spi_segment_ast2600_start, .segment_end = aspeed_spi_segment_ast2600_end, .segment_reg = aspeed_spi_segment_ast2600_reg, From patchwork Mon May 9 17:56:14 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?C=C3=A9dric_Le_Goater?= X-Patchwork-Id: 572009 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 70D01C433FE for ; Mon, 9 May 2022 17:57:35 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239924AbiEISBZ (ORCPT ); Mon, 9 May 2022 14:01:25 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:51214 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239951AbiEISBW (ORCPT ); Mon, 9 May 2022 14:01:22 -0400 Received: from gandalf.ozlabs.org (gandalf.ozlabs.org [150.107.74.76]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 825331E253B; Mon, 9 May 2022 10:57:26 -0700 (PDT) Received: from gandalf.ozlabs.org (gandalf.ozlabs.org [150.107.74.76]) by gandalf.ozlabs.org (Postfix) with ESMTP id 4Kxpm505FBz4yT2; Tue, 10 May 2022 03:57:25 +1000 (AEST) Received: from authenticated.ozlabs.org (localhost [127.0.0.1]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by mail.ozlabs.org (Postfix) with ESMTPSA id 4Kxplz4tbsz4xcY; Tue, 10 May 2022 03:57:19 +1000 (AEST) From: =?utf-8?q?C=C3=A9dric_Le_Goater?= To: linux-spi@vger.kernel.org, linux-mtd@lists.infradead.org Cc: Mark Brown , Tudor Ambarus , Pratyush Yadav , Miquel Raynal , Richard Weinberger , Vignesh Raghavendra , linux-aspeed@lists.ozlabs.org, Joel Stanley , Andrew Jeffery , Chin-Ting Kuo , devicetree@vger.kernel.org, Rob Herring , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, =?utf-8?q?C=C3=A9dric_Le_Goater?= , Tao Ren , Jae Hyun Yoo Subject: [PATCH v7 09/11] ARM: dts: aspeed: Enable Dual SPI RX transfers Date: Mon, 9 May 2022 19:56:14 +0200 Message-Id: <20220509175616.1089346-10-clg@kaod.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220509175616.1089346-1-clg@kaod.org> References: <20220509175616.1089346-1-clg@kaod.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org All these controllers support at least Dual SPI. Update the DTs. Reviewed-by: Joel Stanley Tested-by: Joel Stanley Tested-by: Tao Ren Tested-by: Jae Hyun Yoo Signed-off-by: Cédric Le Goater --- arch/arm/boot/dts/aspeed-g4.dtsi | 6 ++++++ arch/arm/boot/dts/aspeed-g5.dtsi | 7 +++++++ arch/arm/boot/dts/aspeed-g6.dtsi | 8 ++++++++ 3 files changed, 21 insertions(+) diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index 3b7b98e787e7..1c6354cec9f2 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -64,27 +64,32 @@ fmc: spi@1e620000 { flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; + spi-rx-bus-width = <2>; spi-max-frequency = <50000000>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@2 { reg = < 2 >; compatible = "jedec,spi-nor"; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@3 { reg = < 3 >; compatible = "jedec,spi-nor"; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@4 { reg = < 4 >; compatible = "jedec,spi-nor"; + spi-rx-bus-width = <2>; status = "disabled"; }; }; @@ -100,6 +105,7 @@ flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index 1e727cbaab14..c89092c3905b 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -66,18 +66,21 @@ flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@2 { reg = < 2 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; }; @@ -93,12 +96,14 @@ flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; }; @@ -114,12 +119,14 @@ flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 6ae5dfecbdf1..4264fc0a7c3f 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -106,18 +106,21 @@ flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@2 { reg = < 2 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; }; @@ -133,12 +136,14 @@ flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; }; @@ -154,18 +159,21 @@ flash@0 { reg = < 0 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; flash@2 { reg = < 2 >; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; status = "disabled"; }; }; From patchwork Mon May 9 17:56:15 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?C=C3=A9dric_Le_Goater?= X-Patchwork-Id: 571182 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id E8BEEC433FE for ; Mon, 9 May 2022 17:57:41 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239962AbiEISBe (ORCPT ); Mon, 9 May 2022 14:01:34 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52264 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239961AbiEISBc (ORCPT ); Mon, 9 May 2022 14:01:32 -0400 Received: from gandalf.ozlabs.org (mail.ozlabs.org [IPv6:2404:9400:2221:ea00::3]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 7F6111EAF0B; Mon, 9 May 2022 10:57:32 -0700 (PDT) Received: from gandalf.ozlabs.org (mail.ozlabs.org [IPv6:2404:9400:2221:ea00::3]) by gandalf.ozlabs.org (Postfix) with ESMTP id 4KxpmB64sVz4ySW; Tue, 10 May 2022 03:57:30 +1000 (AEST) Received: from authenticated.ozlabs.org (localhost [127.0.0.1]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by mail.ozlabs.org (Postfix) with ESMTPSA id 4Kxpm53q4Tz4xcY; Tue, 10 May 2022 03:57:25 +1000 (AEST) From: =?utf-8?q?C=C3=A9dric_Le_Goater?= To: linux-spi@vger.kernel.org, linux-mtd@lists.infradead.org Cc: Mark Brown , Tudor Ambarus , Pratyush Yadav , Miquel Raynal , Richard Weinberger , Vignesh Raghavendra , linux-aspeed@lists.ozlabs.org, Joel Stanley , Andrew Jeffery , Chin-Ting Kuo , devicetree@vger.kernel.org, Rob Herring , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Tao Ren , =?utf-8?q?C?= =?utf-8?q?=C3=A9dric_Le_Goater?= , Jae Hyun Yoo Subject: [PATCH v7 10/11] ARM: dts: aspeed-g4: Set spi-max-frequency for all flashes Date: Mon, 9 May 2022 19:56:15 +0200 Message-Id: <20220509175616.1089346-11-clg@kaod.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220509175616.1089346-1-clg@kaod.org> References: <20220509175616.1089346-1-clg@kaod.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org From: Tao Ren Set "spi-max-frequency" to 50 MHz for all the flashes under the FMC controller to ensure the clock frequency is calculated correctly. Suggested-by: Cédric Le Goater Tested-by: Jae Hyun Yoo Signed-off-by: Tao Ren Signed-off-by: Cédric Le Goater --- arch/arm/boot/dts/aspeed-g4.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index 1c6354cec9f2..530491ae5eb2 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -72,24 +72,28 @@ flash@1 { reg = < 1 >; compatible = "jedec,spi-nor"; spi-rx-bus-width = <2>; + spi-max-frequency = <50000000>; status = "disabled"; }; flash@2 { reg = < 2 >; compatible = "jedec,spi-nor"; spi-rx-bus-width = <2>; + spi-max-frequency = <50000000>; status = "disabled"; }; flash@3 { reg = < 3 >; compatible = "jedec,spi-nor"; spi-rx-bus-width = <2>; + spi-max-frequency = <50000000>; status = "disabled"; }; flash@4 { reg = < 4 >; compatible = "jedec,spi-nor"; spi-rx-bus-width = <2>; + spi-max-frequency = <50000000>; status = "disabled"; }; }; From patchwork Mon May 9 17:56:16 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?C=C3=A9dric_Le_Goater?= X-Patchwork-Id: 572008 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 8E22DC433F5 for ; Mon, 9 May 2022 17:57:46 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239988AbiEISBj (ORCPT ); Mon, 9 May 2022 14:01:39 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52666 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239970AbiEISBg (ORCPT ); Mon, 9 May 2022 14:01:36 -0400 Received: from gandalf.ozlabs.org (gandalf.ozlabs.org [150.107.74.76]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 77D2C1F7E35; Mon, 9 May 2022 10:57:38 -0700 (PDT) Received: from gandalf.ozlabs.org (gandalf.ozlabs.org [150.107.74.76]) by gandalf.ozlabs.org (Postfix) with ESMTP id 4KxpmK07cmz4xcY; Tue, 10 May 2022 03:57:37 +1000 (AEST) Received: from authenticated.ozlabs.org (localhost [127.0.0.1]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by mail.ozlabs.org (Postfix) with ESMTPSA id 4KxpmC2sCwz4xVP; Tue, 10 May 2022 03:57:31 +1000 (AEST) From: =?utf-8?q?C=C3=A9dric_Le_Goater?= To: linux-spi@vger.kernel.org, linux-mtd@lists.infradead.org Cc: Mark Brown , Tudor Ambarus , Pratyush Yadav , Miquel Raynal , Richard Weinberger , Vignesh Raghavendra , linux-aspeed@lists.ozlabs.org, Joel Stanley , Andrew Jeffery , Chin-Ting Kuo , devicetree@vger.kernel.org, Rob Herring , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Potin Lai , Jae Hyun Yoo , =?utf-8?q?C=C3=A9dric_Le_Goater?= Subject: [PATCH v7 11/11] mtd: spi-nor: aspeed: set the decoding size to at least 2MB for AST2600 Date: Mon, 9 May 2022 19:56:16 +0200 Message-Id: <20220509175616.1089346-12-clg@kaod.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220509175616.1089346-1-clg@kaod.org> References: <20220509175616.1089346-1-clg@kaod.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org From: Potin Lai In AST2600, the unit of SPI CEx decoding range register is 1MB, and end address offset is set to the acctual offset - 1MB. If the flash only has 1MB, the end address will has same value as start address, which will causing unexpected errors. This patch set the decoding size to at least 2MB to avoid decoding errors. Tested: root@bletchley:~# dmesg | grep "aspeed-smc 1e631000.spi: CE0 window" [ 59.328134] aspeed-smc 1e631000.spi: CE0 window resized to 2MB (AST2600 Decoding) [ 59.343001] aspeed-smc 1e631000.spi: CE0 window [ 0x50000000 - 0x50200000 ] 2MB root@bletchley:~# devmem 0x1e631030 0x00100000 Tested-by: Jae Hyun Yoo Signed-off-by: Potin Lai [ clg : Ported on new spi-mem driver ] Signed-off-by: Cédric Le Goater --- drivers/spi/spi-aspeed-smc.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/spi/spi-aspeed-smc.c b/drivers/spi/spi-aspeed-smc.c index 35f6934847b7..496f3e1e9079 100644 --- a/drivers/spi/spi-aspeed-smc.c +++ b/drivers/spi/spi-aspeed-smc.c @@ -474,6 +474,8 @@ static int aspeed_spi_set_window(struct aspeed_spi *aspi, * is correct. */ static const struct aspeed_spi_data ast2500_spi_data; +static const struct aspeed_spi_data ast2600_spi_data; +static const struct aspeed_spi_data ast2600_fmc_data; static int aspeed_spi_chip_adjust_window(struct aspeed_spi_chip *chip, u32 local_offset, u32 size) @@ -497,6 +499,17 @@ static int aspeed_spi_chip_adjust_window(struct aspeed_spi_chip *chip, chip->cs, size >> 20); } + /* + * The decoding size of AST2600 SPI controller should set at + * least 2MB. + */ + if ((aspi->data == &ast2600_spi_data || aspi->data == &ast2600_fmc_data) && + size < SZ_2M) { + size = SZ_2M; + dev_info(aspi->dev, "CE%d window resized to %dMB (AST2600 Decoding)", + chip->cs, size >> 20); + } + aspeed_spi_get_windows(aspi, windows); /* Adjust this chip window */