From patchwork Fri May 13 06:13:41 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 573212 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 71F3CC433F5 for ; Fri, 13 May 2022 06:14:30 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1377246AbiEMGO0 (ORCPT ); Fri, 13 May 2022 02:14:26 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48366 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1377201AbiEMGOP (ORCPT ); Fri, 13 May 2022 02:14:15 -0400 Received: from mail-wm1-x32b.google.com (mail-wm1-x32b.google.com [IPv6:2a00:1450:4864:20::32b]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5032226FA01 for ; Thu, 12 May 2022 23:14:13 -0700 (PDT) Received: by mail-wm1-x32b.google.com with SMTP id bg25so4194173wmb.4 for ; Thu, 12 May 2022 23:14:13 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=j60Q+m0nDVDVeq/kqo9om6jZKItdmd/25D1fiKUieoo=; b=RXdzPf6RIzYbLiWfscYfUw6T2WzdY+PgkUVapfUOjjVwymUsMjbC26PCR35K/9ros3 NFCHpbJFnlIG89xtEy3Y8fJuHDs+f8y2VWtdjyFzlJNHqMWyxu/4TS0DPZBsmdXlvRfO gOLDtt3A/M8SMk1hz6AeH3bZfptUbnH8srkE0oGQgkPBc4uhxYckRGx+iphp7MkOWgBT Ebk/eV5bimzuyoo0GoKPNTzwrrxVsJuRM3lyE2FTid1oRakLXfLEAbUMBbZ6azdMuZck AT14UTj/IIsDlEaeXLMvp4YOFlzorgSQCY7QkLrxR7FJ5oZSqzKhgU4mKwztI8qW8DHA pRHA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=j60Q+m0nDVDVeq/kqo9om6jZKItdmd/25D1fiKUieoo=; b=ZMUPlx7KhkjXswH3/NIWTmc7VXhTQWJ5LbRLm+ooHz8TaVhanO0FpgHsyCKaXRedKc 1Ixw1Rtm0PgfNsAz51/eZ5tFlEwfbsIkt/Qcn0B3KfR6AltNvM7O6seuCyZu8/gNt6nU YOQUZuOomhXzYE7pY+34YLiVbn8fbmFTLESW6xEgWuKh0jODgUubYpurbyetcT0HxIJ/ SkN+RLUGdouScd3ZSha5dMoqh/U+B7fqtAcG+bLz20tyon/zshnyURQWAEMCZRWNitrL KUrn42IW0jrPC8vDwcVGOD8WxTcpX+7O7rlH1MOBzAfDSXnQeUIuFVIAHo5JX968cJMo 0Fdg== X-Gm-Message-State: AOAM531P3PsacgAAbxuG6KDKQBzHk5nz5kQPwpSs2o1K2XSeX/vlsDvH qP7LXcXeEYx1D2NZHwYoSUWLwQ== X-Google-Smtp-Source: ABdhPJxxiNFky+FKvagxgESN3eexGwvVdyb6o64BeUJIDlYUYHYzW412ZYFbVs0kakubT1n7lNKQ5A== X-Received: by 2002:a1c:19c1:0:b0:393:a19f:8f95 with SMTP id 184-20020a1c19c1000000b00393a19f8f95mr2940751wmz.149.1652422451913; Thu, 12 May 2022 23:14:11 -0700 (PDT) Received: from localhost.localdomain (xdsl-188-155-176-92.adslplus.ch. [188.155.176.92]) by smtp.gmail.com with ESMTPSA id g4-20020adfbc84000000b0020c5253d8f3sm1477760wrh.63.2022.05.12.23.14.10 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 12 May 2022 23:14:11 -0700 (PDT) From: Krzysztof Kozlowski To: Andy Gross , Bjorn Andersson , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Alim Akhtar , Avri Altman , "James E.J. Bottomley" , "Martin K. Petersen" , "Rafael J. Wysocki" , Taniya Das , linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, linux-scsi@vger.kernel.org Cc: Krzysztof Kozlowski , Rob Herring , Manivannan Sadhasivam Subject: [PATCH v3 1/7] dt-bindings: clock: qcom, gcc-sdm845: add parent power domain Date: Fri, 13 May 2022 08:13:41 +0200 Message-Id: <20220513061347.46480-2-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20220513061347.46480-1-krzysztof.kozlowski@linaro.org> References: <20220513061347.46480-1-krzysztof.kozlowski@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-scsi@vger.kernel.org Allow Qualcomm GCC to register its parent power domain (e.g. RPMHPD) to properly pass performance state from children. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Bjorn Andersson Acked-by: Rob Herring --- Cc: Manivannan Sadhasivam --- Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml index d902f137ab17..daf7906ebc40 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml @@ -43,6 +43,9 @@ properties: '#reset-cells': const: 1 + power-domains: + maxItems: 1 + '#power-domain-cells': const: 1 From patchwork Fri May 13 06:13:42 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 572477 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id E5A51C433F5 for ; Fri, 13 May 2022 06:14:40 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1377199AbiEMGOh (ORCPT ); Fri, 13 May 2022 02:14:37 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48362 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1377213AbiEMGOR (ORCPT ); Fri, 13 May 2022 02:14:17 -0400 Received: from mail-wr1-x434.google.com (mail-wr1-x434.google.com [IPv6:2a00:1450:4864:20::434]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 3274E26FA38 for ; Thu, 12 May 2022 23:14:15 -0700 (PDT) Received: by mail-wr1-x434.google.com with SMTP id q23so10015938wra.1 for ; Thu, 12 May 2022 23:14:15 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=2QnLrd3aQG4x4XRKBeZ9JG1UWhf0XATvYFxcEhWYbS4=; b=F9+/MjIyLcTvcR1BJUDgg0hsFVaPyYtyTtFv2BGsFvgPi1jYrt9LIO7KKPxj40kLGj qW16X7HTzpFZcQXbRkMY7x5C+OiDC1hiishMwQt9XXr1HsFf5xCLnmgpktv9gurX7350 B5GNOBgSoNBSIdzlr1P/uNFsBkjbOtzG+Kzy6idCPJ7q8CeiHs6gtzwc4X2v4cASoWfW jgJCriYt1rst1Tyg/q3RwW+Lzoqs3M8riw7W4c2kAV5s9NWf0YQD4NlsIEqFFAnMVVJ+ OxpYhfHTf6Zk2gt/rqjEaAtZKYnmvY8tiuG+uLzmFPp53H1Nlvtz9A56Pu1Mm8CSStC9 GbEw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=2QnLrd3aQG4x4XRKBeZ9JG1UWhf0XATvYFxcEhWYbS4=; b=uOb17xik7gxfEJgmcrZZ0vUsRsE/gHipK7S+4SIC2m1XgQgDG04Aiz2B1foAZGnhpp SqTujHfTmeFt8/kr4z15D2Pr660ROVljI09mkbIp1FaBUKOVnGnVQRWszkFAZQdHwSSe /jcZEh4DiRgH5nJIhm7n2Xt7VlHiMoM2SfsXm3VQKvD3rqY094NZqrqCoMxaFl926kiL WK3sZUwM4gjXjJzQW/upaLrh2hbExrc2q4ZxR7lwlvSLPNCTGodpzh7qsdtbAi0EZKIc znCVW9sCRWXfCDSrRb8RV7k656xGrgOT4yorClB/wRs6Hjq0BG/MfeS33iZQjg2tZHvK gqKA== X-Gm-Message-State: AOAM533fuhESgdc0FlqLKcJETFG4PVR/yBff+qsU74E8Wcus8qWs1vtp tnub5meXl8G4i7RpUxBv+uQ98w== X-Google-Smtp-Source: ABdhPJyxlT4LTSxCcbfKaqSmTY40Q1OhX2cXOOeh7WoWgy+4treWyWheDFYdpt7Ykc/JFDcvcDXSNw== X-Received: by 2002:adf:facd:0:b0:20a:de99:403c with SMTP id a13-20020adffacd000000b0020ade99403cmr2477557wrs.123.1652422453624; Thu, 12 May 2022 23:14:13 -0700 (PDT) Received: from localhost.localdomain (xdsl-188-155-176-92.adslplus.ch. [188.155.176.92]) by smtp.gmail.com with ESMTPSA id g4-20020adfbc84000000b0020c5253d8f3sm1477760wrh.63.2022.05.12.23.14.12 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 12 May 2022 23:14:12 -0700 (PDT) From: Krzysztof Kozlowski To: Andy Gross , Bjorn Andersson , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Alim Akhtar , Avri Altman , "James E.J. Bottomley" , "Martin K. Petersen" , "Rafael J. Wysocki" , Taniya Das , linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, linux-scsi@vger.kernel.org Cc: Krzysztof Kozlowski , Rob Herring , Manivannan Sadhasivam Subject: [PATCH v3 2/7] dt-bindings: opp: accept array of frequencies Date: Fri, 13 May 2022 08:13:42 +0200 Message-Id: <20220513061347.46480-3-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20220513061347.46480-1-krzysztof.kozlowski@linaro.org> References: <20220513061347.46480-1-krzysztof.kozlowski@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-scsi@vger.kernel.org Devices might need to control several clocks when scaling the frequency and voltage. Allow passing array of clock frequencies, similarly to the voltages. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Bjorn Andersson Acked-by: Rob Herring --- Cc: Manivannan Sadhasivam --- Documentation/devicetree/bindings/opp/opp-v2-base.yaml | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml index 76c8acd981b3..66d0ec763f0b 100644 --- a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml +++ b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml @@ -50,6 +50,16 @@ patternProperties: property to uniquely identify the OPP nodes exists. Devices like power domains must have another (implementation dependent) property. + Entries for multiple clocks shall be provided in the same field, as + array of frequencies. The OPP binding doesn't provide any provisions + to relate the values to their clocks or the order in which the clocks + need to be configured and that is left for the implementation + specific binding. + minItems: 1 + maxItems: 16 + items: + maxItems: 1 + opp-microvolt: description: | Voltage for the OPP From patchwork Fri May 13 06:13:43 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 573211 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 19D64C4332F for ; Fri, 13 May 2022 06:14:37 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1377261AbiEMGOf (ORCPT ); Fri, 13 May 2022 02:14:35 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48552 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1377217AbiEMGOS (ORCPT ); Fri, 13 May 2022 02:14:18 -0400 Received: from mail-wr1-x434.google.com (mail-wr1-x434.google.com [IPv6:2a00:1450:4864:20::434]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id E64E926FA20 for ; Thu, 12 May 2022 23:14:16 -0700 (PDT) Received: by mail-wr1-x434.google.com with SMTP id j25so8987552wrc.9 for ; Thu, 12 May 2022 23:14:16 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=5QCjzQNVfIHTI2M93e76yaRYudMGDMABQBv/3THcrs0=; b=vYS6qMmJEZVFNULnMGiG3qsBGiCBybGyHh3F32mu4gPpUhpEKTMXB3gNlbkeTpK+Jj Pb1PByrmtrKmUCYDJxjKWvOADoYhS+ecZHjhbJgxims2cBAc3m3IPvin4c2Rr5JX9jbG fnHmkLvQwm9NOzay2YWyWOTZ4WCQa5mfTtqIvWC2GNXG2vmtqr91ds6Cb8b9noveYIIo CLQnKsoGKvHQa+kSFLgb00XcdQ6qxXUeuTHHoKG6RjorWj/swLRWQKFBOpUWOOv++3f+ fpvUEQna6eVt8v33qsJKuh8VFQsKHQnnJUWwtjlC9fZh1h741IBejnMZgXz/SMusYNw5 B9gQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=5QCjzQNVfIHTI2M93e76yaRYudMGDMABQBv/3THcrs0=; b=UneIn7uRYyINiT4fqxypYp7yS4ez0sDngi2PZ+u46HLVXqC0z5qSGyGBH2x1GppscB 6k408r1ZMVDMwGt4cuTc32NkSyZIrMsXbziWAkrmjiC5ff+H9hu0TWCDXnwLuBv8dEZY YlZdV4PAYylU2npaRGXG9bD4dXGfdMSK4AcA2+JGDX5hyv5lPzAnFjbgWi32cpQgT0E2 nBlgzR7+2VmG2tzJ6W871bcK1xKOngnYMXEymodydfJKaxesa38oAaM/LtHebOJ/MRBZ MJj8jOsXu6xZEfQI0OT/A7Ti8szMmZ9BTboSfBDmSBs5f21oAA5EszM7Jc/XH1z5Hoes KIUQ== X-Gm-Message-State: AOAM531sC8UTUVynAkzroXGPKkj1JJcAJU+7VFCsrkvUCAnnEf/EwPaf nROSYTpvzOM+HTxSrdtgUbwHpw== X-Google-Smtp-Source: ABdhPJyyIATyKjiRUxeid5jOjreYwVZ6wwH6YSUPZtqc4E+NEAssOgxzP1UL9k5cqWgrg0H/MOTBlg== X-Received: by 2002:a5d:630d:0:b0:20a:e1a3:8018 with SMTP id i13-20020a5d630d000000b0020ae1a38018mr2429406wru.489.1652422455421; Thu, 12 May 2022 23:14:15 -0700 (PDT) Received: from localhost.localdomain (xdsl-188-155-176-92.adslplus.ch. [188.155.176.92]) by smtp.gmail.com with ESMTPSA id g4-20020adfbc84000000b0020c5253d8f3sm1477760wrh.63.2022.05.12.23.14.13 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 12 May 2022 23:14:14 -0700 (PDT) From: Krzysztof Kozlowski To: Andy Gross , Bjorn Andersson , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Alim Akhtar , Avri Altman , "James E.J. Bottomley" , "Martin K. Petersen" , "Rafael J. Wysocki" , Taniya Das , linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, linux-scsi@vger.kernel.org Cc: Krzysztof Kozlowski , Rob Herring , Manivannan Sadhasivam Subject: [PATCH v3 3/7] dt-bindings: ufs: common: add OPP table Date: Fri, 13 May 2022 08:13:43 +0200 Message-Id: <20220513061347.46480-4-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20220513061347.46480-1-krzysztof.kozlowski@linaro.org> References: <20220513061347.46480-1-krzysztof.kozlowski@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-scsi@vger.kernel.org Except scaling UFS and bus clocks, it's necessary to scale also the voltages of regulators or power domain performance state levels. Adding Operating Performance Points table allows to adjust power domain performance state, depending on the UFS clock speed. OPPv2 deprecates previous property limited to clock scaling: freq-table-hz. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Rob Herring --- Cc: Manivannan Sadhasivam --- .../devicetree/bindings/ufs/ufs-common.yaml | 34 +++++++++++++++++-- 1 file changed, 31 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/ufs/ufs-common.yaml b/Documentation/devicetree/bindings/ufs/ufs-common.yaml index 47a4e9e1a775..d7d2c8a136bb 100644 --- a/Documentation/devicetree/bindings/ufs/ufs-common.yaml +++ b/Documentation/devicetree/bindings/ufs/ufs-common.yaml @@ -20,11 +20,24 @@ properties: items: - description: Minimum frequency for given clock in Hz - description: Maximum frequency for given clock in Hz + deprecated: true description: | + Preferred is operating-points-v2. + Array of operating frequencies in Hz stored in the same order - as the clocks property. If this property is not defined or a value in the - array is "0" then it is assumed that the frequency is set by the parent - clock or a fixed rate clock source. + as the clocks property. If either this property or operating-points-v2 is + not defined or a value in the array is "0" then it is assumed that the + frequency is set by the parent clock or a fixed rate clock source. + + operating-points-v2: + description: + Preferred over freq-table-hz. + If present, each OPP must contain array of frequencies stored in the same + order for each clock. If clock frequency in the array is "0" then it is + assumed that the frequency is set by the parent clock or a fixed rate + clock source. + + opp-table: true interrupts: maxItems: 1 @@ -75,8 +88,23 @@ properties: dependencies: freq-table-hz: [ 'clocks' ] + operating-points-v2: [ 'clocks', 'clock-names' ] required: - interrupts +allOf: + - if: + required: + - freq-table-hz + then: + properties: + operating-points-v2: false + - if: + required: + - operating-points-v2 + then: + properties: + freq-table-hz: false + additionalProperties: true From patchwork Fri May 13 06:13:44 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 572478 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id A8BDBC433FE for ; Fri, 13 May 2022 06:14:33 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1377256AbiEMGOa (ORCPT ); Fri, 13 May 2022 02:14:30 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48372 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1377231AbiEMGOZ (ORCPT ); Fri, 13 May 2022 02:14:25 -0400 Received: from mail-wr1-x433.google.com (mail-wr1-x433.google.com [IPv6:2a00:1450:4864:20::433]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id DC8D626FA15 for ; Thu, 12 May 2022 23:14:18 -0700 (PDT) Received: by mail-wr1-x433.google.com with SMTP id t6so10019546wra.4 for ; Thu, 12 May 2022 23:14:18 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=nZOjg8XaBh6CCn6Js3G6uXfs3Op7yvcsYaras8GIlj8=; b=mQSh+ms5+NL9ibLzhzevs3/7uTZWbcZSWelheKfn5E66Rm84nIBINpLsidC1xbazL4 ZkVzZ2AWThUzGbRkvSYVkwTwjyFhVD25zTEPUcJg9L7OaoqmvwO/cWckLFXYs0kALyjl r5Ib42OtKSswbevBRFxUqk3laoOMdp/9qfUsFoENplsmwjTMmAFxeZpgccTfJUoUO9vU bkP0/73/2NNzkbDIM4jFAqa9GBMMqTfCuPqm7jkKvEmSuN88QRb0ienHxf2eUmm+18cP 3Y9zb4NXVi3M4yr5E6YNPPWsZfxPLnF0xVYdjoZnYVESZuWg7yuAw9fYg4v/r2tS7YBA SqSQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=nZOjg8XaBh6CCn6Js3G6uXfs3Op7yvcsYaras8GIlj8=; b=j8hCeUtoKfjFi2BpeUHwpFRRqc15uw2IXjVxR5ruw+7kdibyz08PPUztNYHSyylv5j RnOHTMZXFUx8dQsKVW62GiA4n1wP6D8dNApMNk9aWsgHNTRihfZWU5ImL3rev3mGQ1ho RAIKgJ+93HVFs7qEJhhJRbiPD2UWCnSWcQqSUtkmH1+L9ioUNgfwydnEJc75azw62zE6 7/NYFnCGzZ65S/6OVdHKXLHsreJQIR8OzSz6yt2Cfb26mDfLcZ93522hLRQqRi3KH5Yf D1a5+R/bdguYlkB1AezfSk+KOba5EWWD4qLiUXgKzIFmuQV4uSHlqrlkgA37owTA+95g mGSA== X-Gm-Message-State: AOAM530VUBLIB7jh7N8vh5lEnu/Jdjf+83CavHQg2TvAG/nLz5fH3WK6 w3TMKCqVnd3gZhFgN7au9v7kFg== X-Google-Smtp-Source: ABdhPJx2CIvfrYk5wtBGS086/J/W4yDfOHmMCCEUwK9Xdb+yFj+w25mFVpRT7qXoE/PEk1kDR64olw== X-Received: by 2002:a5d:6d0b:0:b0:20c:4ec7:8e84 with SMTP id e11-20020a5d6d0b000000b0020c4ec78e84mr2413197wrq.281.1652422457425; Thu, 12 May 2022 23:14:17 -0700 (PDT) Received: from localhost.localdomain (xdsl-188-155-176-92.adslplus.ch. [188.155.176.92]) by smtp.gmail.com with ESMTPSA id g4-20020adfbc84000000b0020c5253d8f3sm1477760wrh.63.2022.05.12.23.14.15 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 12 May 2022 23:14:16 -0700 (PDT) From: Krzysztof Kozlowski To: Andy Gross , Bjorn Andersson , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Alim Akhtar , Avri Altman , "James E.J. Bottomley" , "Martin K. Petersen" , "Rafael J. Wysocki" , Taniya Das , linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, linux-scsi@vger.kernel.org Cc: Krzysztof Kozlowski , Manivannan Sadhasivam Subject: [PATCH v3 4/7] arm64: dts: qcom: sdm845: control RPMHPD performance states with UFS Date: Fri, 13 May 2022 08:13:44 +0200 Message-Id: <20220513061347.46480-5-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20220513061347.46480-1-krzysztof.kozlowski@linaro.org> References: <20220513061347.46480-1-krzysztof.kozlowski@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-scsi@vger.kernel.org UFS, when scaling gears, should choose appropriate performance state of RPMHPD power domain controller. Since UFS belongs to UFS_PHY_GDSC power domain, add necessary parent power domain to GCC. Signed-off-by: Krzysztof Kozlowski --- Cc: Manivannan Sadhasivam --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 43 +++++++++++++++++++++------- 1 file changed, 33 insertions(+), 10 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 692cf4be4eef..befcdd04d832 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -1078,6 +1078,7 @@ gcc: clock-controller@100000 { #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; + power-domains = <&rpmhpd SDM845_CX>; }; qfprom@784000 { @@ -2326,18 +2327,40 @@ ufs_mem_hc: ufshc@1d84000 { <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; - freq-table-hz = - <50000000 200000000>, - <0 0>, - <0 0>, - <37500000 150000000>, - <0 0>, - <0 0>, - <0 0>, - <0 0>, - <0 300000000>; + operating-points-v2 = <&ufs_opp_table>; status = "disabled"; + + ufs_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000 + 0 + 0 + 37500000 + 0 + 0 + 0 + 0 + // FIXME: value 0 copied from freq-table-hz + 0>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000 + 0 + 0 + 150000000 + 0 + 0 + 0 + 0 + 300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; }; ufs_mem_phy: phy@1d87000 { From patchwork Fri May 13 06:13:45 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 573210 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 61CE7C43219 for ; Fri, 13 May 2022 06:15:05 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1377299AbiEMGPC (ORCPT ); Fri, 13 May 2022 02:15:02 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48836 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1377238AbiEMGO0 (ORCPT ); Fri, 13 May 2022 02:14:26 -0400 Received: from mail-wr1-x436.google.com (mail-wr1-x436.google.com [IPv6:2a00:1450:4864:20::436]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 7A993273F44 for ; Thu, 12 May 2022 23:14:20 -0700 (PDT) Received: by mail-wr1-x436.google.com with SMTP id m1so9992388wrb.8 for ; Thu, 12 May 2022 23:14:20 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=aLu21/EAMBj4rBYhFk0RNS4w0Ycj4tgK+zAO7gTd2s4=; b=BUxLVCLTDJ8V3dc/ZchI6ZEzQpiFZYUxB6fKnCDJGAwEUFZlOhFlMdutjcbkbXKmcn VLOG8rA/I+9qLBmuF70RthtGred4rFEN6Gi8OCXqtFUZoanoFwANjm5YUnynw/19DgSl JFu9mKmfGXpgW+6r7Vq5QTK2PMS0abfhMPiQwNPV40ggJ/acEGwFiFWXsVoAI/dmV3ms yxrcEfT5z2dQVoMgP9XtNxZdcoLuH3aW7IBr6eN8aBBbFSywOIKcyZAxSx2EieDBse5W vYv2J4lp/MetB05aaudq5ggLcMalbvoeBUToOOx15+9d3xLTGKX0NrnF0dMZVNuVF9ZF FE6g== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=aLu21/EAMBj4rBYhFk0RNS4w0Ycj4tgK+zAO7gTd2s4=; b=qeLX3iMaHiNedKJzJiV5pTJ8JPwjQHtjnew3GARvihcahoaMEjJedfgnampp/M595I JvxTnAs9oehx+inViV2br2TK8lUrBzHAqRxKZfrnZVfXzUiRD4Tvm7jx800eFKKZYZP2 +ZTzLNmno7tYByqk8IrMUuAyaHeXMjqem/4U13mjWvz0UBWbiPf8qK0JH8regvPvbZY0 hTznXFn2UruhW+Sid8btauMvDC7DEuZzEHJTh3fNTGzy70woFBjzhIJBHk9VHlDnSPJT xaWh7oNBCuaV6b7OT7PmoOlRqKDNYEkrG9/rJLRhg6Aa/uEHXdxsMCeDs1qsnlhTHKF/ f5/w== X-Gm-Message-State: AOAM532CN5cKsAcvaR21wUO8cNDbOzV0XyYVcdflAzU7JSDMVNLIWyNi zBA/bQfjiF3wrKG5CaJh8C8Krw== X-Google-Smtp-Source: ABdhPJx1UCYChPWaV7usSuEDEzkAG38Ui94RRVT8rND6KcnUFi6DNGfzlVER+jUAUJQDT50g9fHzPw== X-Received: by 2002:adf:e8cb:0:b0:20c:5584:ba44 with SMTP id k11-20020adfe8cb000000b0020c5584ba44mr2464665wrn.173.1652422458839; Thu, 12 May 2022 23:14:18 -0700 (PDT) Received: from localhost.localdomain (xdsl-188-155-176-92.adslplus.ch. [188.155.176.92]) by smtp.gmail.com with ESMTPSA id g4-20020adfbc84000000b0020c5253d8f3sm1477760wrh.63.2022.05.12.23.14.17 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 12 May 2022 23:14:18 -0700 (PDT) From: Krzysztof Kozlowski To: Andy Gross , Bjorn Andersson , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Alim Akhtar , Avri Altman , "James E.J. Bottomley" , "Martin K. Petersen" , "Rafael J. Wysocki" , Taniya Das , linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, linux-scsi@vger.kernel.org Cc: Krzysztof Kozlowski , Manivannan Sadhasivam Subject: [PATCH v3 5/7] PM: opp: allow control of multiple clocks Date: Fri, 13 May 2022 08:13:45 +0200 Message-Id: <20220513061347.46480-6-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20220513061347.46480-1-krzysztof.kozlowski@linaro.org> References: <20220513061347.46480-1-krzysztof.kozlowski@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-scsi@vger.kernel.org Devices might need to control several clocks when scaling the frequency and voltage. Example is the Universal Flash Storage (UFS) which scales several independent clocks with change of performance levels. Add parsing of multiple clocks and clock names, similarly to parsing multiple regulators, and store them for custom set_opp. The custom set_opp helper is a requirement in such case, otherwise OPP framework will refuse to scale multiple clocks. Signed-off-by: Krzysztof Kozlowski --- Cc: Manivannan Sadhasivam --- drivers/opp/core.c | 187 +++++++++++++++++++++++++++--------- drivers/opp/opp.h | 7 +- drivers/opp/ti-opp-supply.c | 6 +- include/linux/pm_opp.h | 29 +++++- 4 files changed, 177 insertions(+), 52 deletions(-) diff --git a/drivers/opp/core.c b/drivers/opp/core.c index 84063eaebb91..aac3c6d89ae0 100644 --- a/drivers/opp/core.c +++ b/drivers/opp/core.c @@ -66,6 +66,18 @@ static struct opp_table *_find_opp_table_unlocked(struct device *dev) return ERR_PTR(-ENODEV); } +static void _put_clocks(struct opp_table *opp_table) +{ + if (!opp_table->clks) + return; + + clk_bulk_put(opp_table->clk_count, opp_table->clks); + + kfree(opp_table->clks); + opp_table->clks = NULL; + opp_table->clk_count = -1; +}; + /** * _find_opp_table() - find opp_table struct using device pointer * @dev: device pointer used to lookup OPP table @@ -874,11 +886,23 @@ static int _set_opp_voltage(struct device *dev, struct regulator *reg, return ret; } -static inline int _generic_set_opp_clk_only(struct device *dev, struct clk *clk, +static inline int _generic_set_opp_clk_only(struct device *dev, + struct opp_table *opp_table, unsigned long freq) { + struct clk *clk; int ret; + /* This function only supports single clock per device */ + if (WARN_ON(opp_table->clk_count > 1)) { + dev_err(dev, "multiple clocks are not supported\n"); + return -EINVAL; + } + + if (!opp_table->clks) + return 0; + clk = opp_table->clks[0].clk; + /* We may reach here for devices which don't change frequency */ if (IS_ERR(clk)) return 0; @@ -903,8 +927,9 @@ static int _generic_set_opp_regulator(struct opp_table *opp_table, int ret; /* This function only supports single regulator per device */ - if (WARN_ON(opp_table->regulator_count > 1)) { - dev_err(dev, "multiple regulators are not supported\n"); + if (WARN_ON(opp_table->regulator_count > 1) || + WARN_ON(opp_table->clk_count > 1)) { + dev_err(dev, "multiple clocks/regulators are not supported\n"); return -EINVAL; } @@ -916,7 +941,7 @@ static int _generic_set_opp_regulator(struct opp_table *opp_table, } /* Change frequency */ - ret = _generic_set_opp_clk_only(dev, opp_table->clk, freq); + ret = _generic_set_opp_clk_only(dev, opp_table, freq); if (ret) goto restore_voltage; @@ -940,7 +965,7 @@ static int _generic_set_opp_regulator(struct opp_table *opp_table, return 0; restore_freq: - if (_generic_set_opp_clk_only(dev, opp_table->clk, old_opp->rate)) + if (_generic_set_opp_clk_only(dev, opp_table, old_opp->rate)) dev_err(dev, "%s: failed to restore old-freq (%lu Hz)\n", __func__, old_opp->rate); restore_voltage: @@ -987,8 +1012,8 @@ static int _set_opp_custom(const struct opp_table *opp_table, int size; /* - * We support this only if dev_pm_opp_set_regulators() was called - * earlier. + * We support this only if dev_pm_opp_set_regulators() or + * dev_pm_opp_set_clknames() were called earlier. */ if (opp_table->sod_supplies) { size = sizeof(*old_opp->supplies) * opp_table->regulator_count; @@ -999,8 +1024,13 @@ static int _set_opp_custom(const struct opp_table *opp_table, data->regulator_count = 0; } + if (opp_table->clks) + data->clk_count = opp_table->clk_count; + else + data->clk_count = 0; + data->regulators = opp_table->regulators; - data->clk = opp_table->clk; + data->clks = opp_table->clks; data->dev = dev; data->old_opp.rate = old_opp->rate; data->new_opp.rate = freq; @@ -1089,8 +1119,8 @@ static void _find_current_opp(struct device *dev, struct opp_table *opp_table) struct dev_pm_opp *opp = ERR_PTR(-ENODEV); unsigned long freq; - if (!IS_ERR(opp_table->clk)) { - freq = clk_get_rate(opp_table->clk); + if (opp_table->clks && !IS_ERR(opp_table->clks[0].clk)) { + freq = clk_get_rate(opp_table->clks[0].clk); opp = _find_freq_ceil(opp_table, &freq); } @@ -1190,7 +1220,7 @@ static int _set_opp(struct device *dev, struct opp_table *opp_table, scaling_down); } else { /* Only frequency scaling */ - ret = _generic_set_opp_clk_only(dev, opp_table->clk, freq); + ret = _generic_set_opp_clk_only(dev, opp_table, freq); } if (ret) @@ -1255,11 +1285,12 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) * equivalent to a clk_set_rate() */ if (!_get_opp_count(opp_table)) { - ret = _generic_set_opp_clk_only(dev, opp_table->clk, target_freq); + ret = _generic_set_opp_clk_only(dev, opp_table, target_freq); goto put_opp_table; } - freq = clk_round_rate(opp_table->clk, target_freq); + if (opp_table->clks) + freq = clk_round_rate(opp_table->clks[0].clk, target_freq); if ((long)freq <= 0) freq = target_freq; @@ -1366,7 +1397,8 @@ static struct opp_table *_allocate_opp_table(struct device *dev, int index) INIT_LIST_HEAD(&opp_table->dev_list); INIT_LIST_HEAD(&opp_table->lazy); - /* Mark regulator count uninitialized */ + /* Mark regulator/clk count uninitialized */ + opp_table->clk_count = -1; opp_table->regulator_count = -1; opp_dev = _add_opp_dev(dev, opp_table); @@ -1415,21 +1447,29 @@ static struct opp_table *_update_opp_table_clk(struct device *dev, * Return early if we don't need to get clk or we have already tried it * earlier. */ - if (!getclk || IS_ERR(opp_table) || opp_table->clk) + if (!getclk || IS_ERR(opp_table) || opp_table->clks) return opp_table; - /* Find clk for the device */ - opp_table->clk = clk_get(dev, NULL); + opp_table->clks = kcalloc(1, sizeof(*opp_table->clks), GFP_KERNEL); + if (!opp_table->clks) + return ERR_PTR(-ENOMEM); - ret = PTR_ERR_OR_ZERO(opp_table->clk); - if (!ret) + /* Find clk for the device */ + ret = clk_bulk_get(dev, 1, opp_table->clks); + if (!ret) { + opp_table->clk_count = 1; return opp_table; + } if (ret == -ENOENT) { + opp_table->clk_count = 0; dev_dbg(dev, "%s: Couldn't find clock: %d\n", __func__, ret); return opp_table; } + kfree(opp_table->clks); + opp_table->clks = NULL; + opp_table->clk_count = -1; dev_pm_opp_put_opp_table(opp_table); dev_err_probe(dev, ret, "Couldn't find clock\n"); @@ -1528,9 +1568,7 @@ static void _opp_table_kref_release(struct kref *kref) _of_clear_opp_table(opp_table); - /* Release clk */ - if (!IS_ERR(opp_table->clk)) - clk_put(opp_table->clk); + _put_clocks(opp_table); if (opp_table->paths) { for (i = 0; i < opp_table->path_count; i++) @@ -2263,9 +2301,50 @@ EXPORT_SYMBOL_GPL(devm_pm_opp_set_regulators); * This must be called before any OPPs are initialized for the device. */ struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char *name) +{ + return dev_pm_opp_set_clknames(dev, &name, 1); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_set_clkname); + +/** + * dev_pm_opp_put_clkname() - Releases resources blocked for clk. + * @opp_table: OPP table returned from dev_pm_opp_set_clkname(). + */ +void dev_pm_opp_put_clkname(struct opp_table *opp_table) +{ + return dev_pm_opp_put_clknames(opp_table); +} +EXPORT_SYMBOL_GPL(dev_pm_opp_put_clkname); + +/** + * devm_pm_opp_set_clkname() - Set clk name for the device + * @dev: Device for which clk name is being set. + * @name: Clk name. + * + * This is a resource-managed variant of dev_pm_opp_set_clkname(). + * + * Return: 0 on success and errorno otherwise. + */ +int devm_pm_opp_set_clkname(struct device *dev, const char *name) +{ + return devm_pm_opp_set_clknames(dev, &name, 1); +} +EXPORT_SYMBOL_GPL(devm_pm_opp_set_clkname); + +/** + * dev_pm_opp_set_clknames() - Set clk names for the device + * @dev: Device for which clock names are being set. + * @names: Array of pointers to the names of the clocks. + * @count: Number of clocks. + * + * See: dev_pm_opp_set_clkname() + */ +struct opp_table *dev_pm_opp_set_clknames(struct device *dev, + const char * const names[], + unsigned int count) { struct opp_table *opp_table; - int ret; + int ret, i; opp_table = _add_opp_table(dev, false); if (IS_ERR(opp_table)) @@ -2278,70 +2357,83 @@ struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char *name) } /* clk shouldn't be initialized at this point */ - if (WARN_ON(opp_table->clk)) { + if (WARN_ON(opp_table->clks)) { ret = -EBUSY; goto err; } - /* Find clk for the device */ - opp_table->clk = clk_get(dev, name); - if (IS_ERR(opp_table->clk)) { - ret = dev_err_probe(dev, PTR_ERR(opp_table->clk), - "%s: Couldn't find clock\n", __func__); + opp_table->clks = kcalloc(count, sizeof(*opp_table->clks), GFP_KERNEL); + if (!opp_table->clks) { + ret = -ENOMEM; goto err; } + for (i = 0; i < count; i++) + opp_table->clks[i].id = names[i]; + + ret = clk_bulk_get(dev, count, opp_table->clks); + if (ret) + goto free_clks; + + opp_table->clk_count = count; + return opp_table; +free_clks: + kfree(opp_table->clks); + opp_table->clks = NULL; + opp_table->clk_count = -1; err: dev_pm_opp_put_opp_table(opp_table); return ERR_PTR(ret); } -EXPORT_SYMBOL_GPL(dev_pm_opp_set_clkname); +EXPORT_SYMBOL_GPL(dev_pm_opp_set_clknames); /** - * dev_pm_opp_put_clkname() - Releases resources blocked for clk. - * @opp_table: OPP table returned from dev_pm_opp_set_clkname(). + * dev_pm_opp_put_clknames() - Releases resources blocked for clk. + * @opp_table: OPP table returned from dev_pm_opp_set_clknames(). */ -void dev_pm_opp_put_clkname(struct opp_table *opp_table) +void dev_pm_opp_put_clknames(struct opp_table *opp_table) { if (unlikely(!opp_table)) return; - clk_put(opp_table->clk); - opp_table->clk = ERR_PTR(-EINVAL); + _put_clocks(opp_table); dev_pm_opp_put_opp_table(opp_table); } -EXPORT_SYMBOL_GPL(dev_pm_opp_put_clkname); +EXPORT_SYMBOL_GPL(dev_pm_opp_put_clknames); -static void devm_pm_opp_clkname_release(void *data) +static void devm_pm_opp_clknames_release(void *data) { - dev_pm_opp_put_clkname(data); + dev_pm_opp_put_clknames(data); } /** - * devm_pm_opp_set_clkname() - Set clk name for the device - * @dev: Device for which clk name is being set. - * @name: Clk name. + * devm_pm_opp_set_clknames() - Set clock names for the device + * @dev: Device for which clock names are being set. + * @names: Array of pointers to the names of the clocks. + * @count: Number of clocks. * - * This is a resource-managed variant of dev_pm_opp_set_clkname(). + * This is a resource-managed variant of dev_pm_opp_set_clknames(). * * Return: 0 on success and errorno otherwise. */ -int devm_pm_opp_set_clkname(struct device *dev, const char *name) +int devm_pm_opp_set_clknames(struct device *dev, + const char * const names[], + unsigned int count) { struct opp_table *opp_table; - opp_table = dev_pm_opp_set_clkname(dev, name); + opp_table = dev_pm_opp_set_clknames(dev, names, count); if (IS_ERR(opp_table)) return PTR_ERR(opp_table); - return devm_add_action_or_reset(dev, devm_pm_opp_clkname_release, + return devm_add_action_or_reset(dev, devm_pm_opp_clknames_release, opp_table); } -EXPORT_SYMBOL_GPL(devm_pm_opp_set_clkname); +EXPORT_SYMBOL_GPL(devm_pm_opp_set_clknames); /** * dev_pm_opp_register_set_opp_helper() - Register custom set OPP helper @@ -2756,7 +2848,8 @@ int dev_pm_opp_add(struct device *dev, unsigned long freq, unsigned long u_volt) if (IS_ERR(opp_table)) return PTR_ERR(opp_table); - /* Fix regulator count for dynamic OPPs */ + /* Fix regulator/clk count for dynamic OPPs */ + opp_table->clk_count = 1; opp_table->regulator_count = 1; ret = _opp_add_v1(opp_table, dev, freq, u_volt, true); diff --git a/drivers/opp/opp.h b/drivers/opp/opp.h index 45e3a55239a1..59aac08baf82 100644 --- a/drivers/opp/opp.h +++ b/drivers/opp/opp.h @@ -149,7 +149,9 @@ enum opp_table_access { * @supported_hw: Array of version number to support. * @supported_hw_count: Number of elements in supported_hw array. * @prop_name: A name to postfix to many DT properties, while parsing them. - * @clk: Device's clock handle + * @clks: Device clocks handles (clk bulk API). + * @clk_count: Number of clocks. Its value can be -1 (uninitialized), 0 (no + * clock handle provided) or > 0 (has clock handles). * @regulators: Supply regulators * @regulator_count: Number of power supply regulators. Its value can be -1 * (uninitialized), 0 (no opp-microvolt property) or > 0 (has opp-microvolt @@ -200,7 +202,8 @@ struct opp_table { unsigned int *supported_hw; unsigned int supported_hw_count; const char *prop_name; - struct clk *clk; + struct clk_bulk_data *clks; + int clk_count; struct regulator **regulators; int regulator_count; struct icc_path **paths; diff --git a/drivers/opp/ti-opp-supply.c b/drivers/opp/ti-opp-supply.c index bd4771f388ab..ebb6531f39c4 100644 --- a/drivers/opp/ti-opp-supply.c +++ b/drivers/opp/ti-opp-supply.c @@ -281,12 +281,16 @@ static int ti_opp_supply_set_opp(struct dev_pm_set_opp_data *data) struct dev_pm_opp_supply *new_supply_vbb = &data->new_opp.supplies[1]; struct device *dev = data->dev; unsigned long old_freq = data->old_opp.rate, freq = data->new_opp.rate; - struct clk *clk = data->clk; struct regulator *vdd_reg = data->regulators[0]; struct regulator *vbb_reg = data->regulators[1]; + struct clk *clk; int vdd_uv; int ret; + if (WARN_ON_ONCE(!data->clk_count)) + return -EINVAL; + + clk = data->clks[0].clk; vdd_uv = _get_optimal_vdd_voltage(dev, &opp_data, new_supply_vdd->u_volt); diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h index 6708b4ec244d..5f17f10fcc3f 100644 --- a/include/linux/pm_opp.h +++ b/include/linux/pm_opp.h @@ -75,7 +75,8 @@ struct dev_pm_opp_info { * @new_opp: New OPP info * @regulators: Array of regulator pointers * @regulator_count: Number of regulators - * @clk: Pointer to clk + * @clks: Device clocks handles (clk bulk API) + * @clk_count: Number of clocks * @dev: Pointer to the struct device * * This structure contains all information required for setting an OPP. @@ -86,7 +87,8 @@ struct dev_pm_set_opp_data { struct regulator **regulators; unsigned int regulator_count; - struct clk *clk; + struct clk_bulk_data *clks; + unsigned int clk_count; struct device *dev; }; @@ -165,6 +167,13 @@ int devm_pm_opp_set_regulators(struct device *dev, const char * const names[], u struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char *name); void dev_pm_opp_put_clkname(struct opp_table *opp_table); int devm_pm_opp_set_clkname(struct device *dev, const char *name); +struct opp_table *dev_pm_opp_set_clknames(struct device *dev, + const char * const names[], + unsigned int count); +void dev_pm_opp_put_clknames(struct opp_table *opp_table); +int devm_pm_opp_set_clknames(struct device *dev, + const char * const names[], + unsigned int count); struct opp_table *dev_pm_opp_register_set_opp_helper(struct device *dev, int (*set_opp)(struct dev_pm_set_opp_data *data)); void dev_pm_opp_unregister_set_opp_helper(struct opp_table *opp_table); int devm_pm_opp_register_set_opp_helper(struct device *dev, int (*set_opp)(struct dev_pm_set_opp_data *data)); @@ -405,6 +414,22 @@ static inline int devm_pm_opp_set_clkname(struct device *dev, const char *name) return -EOPNOTSUPP; } +static inline struct opp_table *dev_pm_opp_set_clknames(struct device *dev, + const char * const names[], + unsigned int count) +{ + return ERR_PTR(-EOPNOTSUPP); +} + +static inline void dev_pm_opp_put_clknames(struct opp_table *opp_table) {} + +static inline int devm_pm_opp_set_clknames(struct device *dev, + const char * const names[], + unsigned int count) +{ + return -EOPNOTSUPP; +} + static inline struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, const char * const *names, struct device ***virt_devs) { return ERR_PTR(-EOPNOTSUPP); From patchwork Fri May 13 06:13:46 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 572476 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7603EC4332F for ; Fri, 13 May 2022 06:15:08 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1352972AbiEMGPG (ORCPT ); Fri, 13 May 2022 02:15:06 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48838 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1377237AbiEMGO0 (ORCPT ); Fri, 13 May 2022 02:14:26 -0400 Received: from mail-wr1-x430.google.com (mail-wr1-x430.google.com [IPv6:2a00:1450:4864:20::430]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4AE5026FA2B for ; Thu, 12 May 2022 23:14:21 -0700 (PDT) Received: by mail-wr1-x430.google.com with SMTP id t6so10019446wra.4 for ; Thu, 12 May 2022 23:14:21 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=qzW3JoJQPDC9Hv68vgom4XDNC9N28iHOq+Cur+ByVqQ=; b=zrKpZ6Kx2dSCwdX5Q0oRdTH5rr733qHsdN8O8dGeRJiBpBq1L9iwbLvMvBuRmPLCjt OFvYaYDNoa7t3BYOWzILjyBHlydlPCThP0ESB/exAMKXdymr0pH05hz/joLdFSETmadp SCB6WEH/ZjEepEQGHgix1RdhRH6Flu9/qa0L7HRlIu8slnxvMVI7dgAIS30tGyWvIAnN eZnUc8+eK9BoSVHjGpBilxj6incGshRhhTWfWNSpX7j/m0oS1ACjcydj46c4p33szAIp r8RdvDPWdLmMZdXSvN8nU+TuWL4w47y3Z9Pcd8rr5SLgyH1/W/saY5hD2REuMXFMCk8S xYSg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=qzW3JoJQPDC9Hv68vgom4XDNC9N28iHOq+Cur+ByVqQ=; b=KBRVyVMyhWEfDQaxUEBjYWyXqEUOBneawI1Te9EOkFOBpgXduL5qqd2eOHKev3HxgH +aiN66H4NPchlvTeOfxd9uUfy/R47sC5v6A4aYYtC9Y52jObwvRYnBHei/T5hvwFEbhs G1/aSfsNKHfBLvM/Jiw5l/FYMLG42rJQMqlulYSzouFPVErJDmxqxvICClmm4jnaKink NTvQ/i5+ghnRMGubcF868AYf80dIolI2yC3tff/ExjX8+gOQYQ8Qw0fhCFN2JAf6mBvs 9QOZFAAMRYubGXeB8nz4gIczANeImc+bbhvhYKMBvPRo3xY8lI2Ao99/1PShMvFLYkb5 Dbvw== X-Gm-Message-State: AOAM5315fpU8FO/sfAHLJdh+Nfzv6RBL9UY72Kc+9VafaqJhDH6rALmL mPU54KHXxsk9R9ULspcbfHq6Bg== X-Google-Smtp-Source: ABdhPJxmM0MKGTb9qCGmU9hYDJSgF6LhHt/K3GDRIhTzQ+jQrRpgDVLPrwWVSWhfArX6dSfHStQ+Xw== X-Received: by 2002:a05:6000:718:b0:20c:c39e:867e with SMTP id bs24-20020a056000071800b0020cc39e867emr2450397wrb.599.1652422460530; Thu, 12 May 2022 23:14:20 -0700 (PDT) Received: from localhost.localdomain (xdsl-188-155-176-92.adslplus.ch. [188.155.176.92]) by smtp.gmail.com with ESMTPSA id g4-20020adfbc84000000b0020c5253d8f3sm1477760wrh.63.2022.05.12.23.14.18 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 12 May 2022 23:14:19 -0700 (PDT) From: Krzysztof Kozlowski To: Andy Gross , Bjorn Andersson , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Alim Akhtar , Avri Altman , "James E.J. Bottomley" , "Martin K. Petersen" , "Rafael J. Wysocki" , Taniya Das , linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, linux-scsi@vger.kernel.org Cc: Krzysztof Kozlowski , Manivannan Sadhasivam Subject: [PATCH v3 6/7] PM: opp: parse multiple frequencies in each OPP Date: Fri, 13 May 2022 08:13:46 +0200 Message-Id: <20220513061347.46480-7-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20220513061347.46480-1-krzysztof.kozlowski@linaro.org> References: <20220513061347.46480-1-krzysztof.kozlowski@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-scsi@vger.kernel.org Devices might need to control several clocks when scaling the frequency and voltage, with each clock having different frequency. Parse the 'opp-hz' Devicetree property as an array and store all frequencies for the custom set_opp in a new field 'rates'. Since the PM OPP framework operates on only one clock (multiple clocks are for custom set_opp helpers), these frequencies are actually not used internally and still the core relies on the original field 'rate'. All other PM OPP functions, like finding floor/ceil PM OPPs, operate still on first rate given in the 'opp-hz' frequency. Signed-off-by: Krzysztof Kozlowski --- Cc: Manivannan Sadhasivam --- drivers/opp/core.c | 20 +++++++++++++++--- drivers/opp/of.c | 47 ++++++++++++++++++++++++++++++++++++++++++ drivers/opp/opp.h | 2 ++ include/linux/pm_opp.h | 3 +++ 4 files changed, 69 insertions(+), 3 deletions(-) diff --git a/drivers/opp/core.c b/drivers/opp/core.c index aac3c6d89ae0..563e962c3411 100644 --- a/drivers/opp/core.c +++ b/drivers/opp/core.c @@ -1033,7 +1033,9 @@ static int _set_opp_custom(const struct opp_table *opp_table, data->clks = opp_table->clks; data->dev = dev; data->old_opp.rate = old_opp->rate; + data->old_opp.rates = old_opp->rates; data->new_opp.rate = freq; + data->new_opp.rates = opp->rates; return opp_table->set_opp(data); } @@ -1307,6 +1309,11 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) __func__, freq, ret); goto put_opp_table; } + /* + * opp->rates are used for scaling clocks, so be sure accurate + * 'freq' is used, instead what was defined via e.g. Devicetree. + */ + opp->rates[0] = freq; } ret = _set_opp(dev, opp_table, opp, freq); @@ -1761,23 +1768,29 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_remove_all_dynamic); struct dev_pm_opp *_opp_allocate(struct opp_table *table) { struct dev_pm_opp *opp; - int supply_count, supply_size, icc_size; + int rate_count, rate_size, supply_count, supply_size, icc_size; /* Allocate space for at least one supply */ supply_count = table->regulator_count > 0 ? table->regulator_count : 1; supply_size = sizeof(*opp->supplies) * supply_count; + /* Allocate space for at least one rate */ + rate_count = table->clk_count > 0 ? table->clk_count : 1; + rate_size = sizeof(*opp->rates) * rate_count; icc_size = sizeof(*opp->bandwidth) * table->path_count; /* allocate new OPP node and supplies structures */ - opp = kzalloc(sizeof(*opp) + supply_size + icc_size, GFP_KERNEL); + opp = kzalloc(sizeof(*opp) + rate_size + supply_size + icc_size, + GFP_KERNEL); if (!opp) return NULL; /* Put the supplies at the end of the OPP structure as an empty array */ opp->supplies = (struct dev_pm_opp_supply *)(opp + 1); + opp->rates = (unsigned long *)(opp->supplies + supply_count); if (icc_size) - opp->bandwidth = (struct dev_pm_opp_icc_bw *)(opp->supplies + supply_count); + opp->bandwidth = (struct dev_pm_opp_icc_bw *)(opp->rates + rate_count); + INIT_LIST_HEAD(&opp->node); return opp; @@ -1957,6 +1970,7 @@ int _opp_add_v1(struct opp_table *opp_table, struct device *dev, /* populate the opp table */ new_opp->rate = freq; + new_opp->rates[0] = freq; tol = u_volt * opp_table->voltage_tolerance_v1 / 100; new_opp->supplies[0].u_volt = u_volt; new_opp->supplies[0].u_volt_min = u_volt - tol; diff --git a/drivers/opp/of.c b/drivers/opp/of.c index 30394929d700..b226d2c7a84b 100644 --- a/drivers/opp/of.c +++ b/drivers/opp/of.c @@ -767,6 +767,46 @@ void dev_pm_opp_of_remove_table(struct device *dev) } EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table); +static int _read_clocks(struct dev_pm_opp *opp, struct opp_table *opp_table, + struct device_node *np) +{ + int i, count, ret; + u64 *freq; + + count = of_property_count_u64_elems(np, "opp-hz"); + if (count < 0) { + pr_err("%s: Invalid %s property (%d)\n", + __func__, of_node_full_name(np), count); + return count; + } + + if (count != opp_table->clk_count) { + pr_err("%s: number of rates %d does not match number of clocks %d in %pOF\n", + __func__, count, opp_table->clk_count, np); + return -EINVAL; + } + + freq = kmalloc_array(count, sizeof(*freq), GFP_KERNEL); + if (!freq) + return -ENOMEM; + + ret = of_property_read_u64_array(np, "opp-hz", freq, count); + if (ret) { + pr_err("%s: error parsing %s: %d\n", __func__, + of_node_full_name(np), ret); + ret = -EINVAL; + goto free_freq; + } + + for (i = 0; i < count; i++) + opp->rates[i] = freq[i]; + +free_freq: + kfree(freq); + + return ret; +} + static int _read_bw(struct dev_pm_opp *new_opp, struct opp_table *table, struct device_node *np, bool peak) { @@ -827,6 +867,13 @@ static int _read_opp_key(struct dev_pm_opp *new_opp, struct opp_table *table, } *rate_not_available = !!ret; + if (!ret) { + ret = _read_clocks(new_opp, table, np); + /* The properties were found but we failed to parse them */ + if (ret && ret != -ENODEV) + return ret; + } + /* * Bandwidth consists of peak and average (optional) values: * opp-peak-kBps = ; diff --git a/drivers/opp/opp.h b/drivers/opp/opp.h index 59aac08baf82..217d4376af9b 100644 --- a/drivers/opp/opp.h +++ b/drivers/opp/opp.h @@ -61,6 +61,7 @@ extern struct list_head opp_tables, lazy_opp_tables; * @rate: Frequency in hertz * @level: Performance level * @supplies: Power supplies voltage/current values + * @rates: Frequency rates for the clocks (equal to @rate for one clock) * @bandwidth: Interconnect bandwidth values * @clock_latency_ns: Latency (in nanoseconds) of switching to this OPP's * frequency from any other OPP's frequency. @@ -85,6 +86,7 @@ struct dev_pm_opp { unsigned int level; struct dev_pm_opp_supply *supplies; + unsigned long *rates; struct dev_pm_opp_icc_bw *bandwidth; unsigned long clock_latency_ns; diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h index 5f17f10fcc3f..5fd3895af605 100644 --- a/include/linux/pm_opp.h +++ b/include/linux/pm_opp.h @@ -60,12 +60,15 @@ struct dev_pm_opp_icc_bw { /** * struct dev_pm_opp_info - OPP freq/voltage/current values * @rate: Target clk rate in hz + * @rates: Array of clock frequencies for all clocks (equal to @rate for + * one clock) * @supplies: Array of voltage/current values for all power supplies * * This structure stores the freq/voltage/current values for a single OPP. */ struct dev_pm_opp_info { unsigned long rate; + unsigned long *rates; struct dev_pm_opp_supply *supplies; }; From patchwork Fri May 13 06:13:47 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 573209 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 4FD7FC433EF for ; Fri, 13 May 2022 06:15:21 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1377335AbiEMGPQ (ORCPT ); Fri, 13 May 2022 02:15:16 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48942 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1377208AbiEMGO0 (ORCPT ); Fri, 13 May 2022 02:14:26 -0400 Received: from mail-wr1-x42f.google.com (mail-wr1-x42f.google.com [IPv6:2a00:1450:4864:20::42f]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4C017274A21 for ; Thu, 12 May 2022 23:14:22 -0700 (PDT) Received: by mail-wr1-x42f.google.com with SMTP id d5so10011977wrb.6 for ; Thu, 12 May 2022 23:14:22 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=LettUZrmtWFjDsFmqWZJ7ObdkPslBud714e9wIv8Uc0=; b=ojgVydyVFBx//22p/9qTLJ+5/mHNPD0b57JxlQMBS27tzA96I5C+8rffSAXDhL/qDM K1X43Iqaelb3cABYHpCagLQr5ftCuW8hRm8R5oeWWE9gC+VK1b+sF8s9EFid6mHF2H2o Utc2sNOj93Q3wJ8WYOs7p25FMo6JwaMeOrGYGtV4MWZRUJlTj6iDOD9FymtbUNXdxCTr 8Yi01qV7K79yk0SjhM8/Tv41mOhAtoFca4QH6FjSZwF6/C3ZDIJ3GDywcw2SSDCSGwIP yWATiKnudUprZzRdRNQZdoRu6jcUX8TWbwTJsZn3vdhSgt77KFi3qcLS0vfMldfoLIMk LXSQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=LettUZrmtWFjDsFmqWZJ7ObdkPslBud714e9wIv8Uc0=; b=y126h+TuYsAfn2Pky6U5xdcs5jebShmCVvU9vsdd8xt7GL9DTrnvBRtV4KM+Ucpg87 oHGqWUyMOmsS2XbgIKeG9LmwXtxlcjY4WvFoOQaQY3D/Ej09JVby2tqN1Q8dZ5XYioua xikQtzPAhgWRnizBRz+3Wiy3SF+XDmZ0923V6r3WQzMoFAaS4CTyDRcZvocwvxUK1dRS iy6j6hJSnvEaiTCUmRik+wBdF5axcaYvwFqXyykC//x20NOOGDJn0uWlljICYiwaD9YH yBF5MegT6H5svrVFouZDzx80fe9DUBSRGPf4KzaKU4IpXcQXIsyoykP8jaaE1oWbNqr6 uGIQ== X-Gm-Message-State: AOAM531wV09fuXXwvXHAlFSDSol6ewFVW6iUbQ/hnO6Ho3fd1spOPKOj x/kD//LtvI7OhHdY1/amBWM2ow== X-Google-Smtp-Source: ABdhPJzf0sBAplYLZwmAE0yuGK5oYabgC7aryMA1kj6/5VC2Q6MKCC2r+gz0of7ZnAwLgIAuOpfj3A== X-Received: by 2002:a05:6000:178d:b0:20c:5bfd:4d7d with SMTP id e13-20020a056000178d00b0020c5bfd4d7dmr2470463wrg.23.1652422462113; Thu, 12 May 2022 23:14:22 -0700 (PDT) Received: from localhost.localdomain (xdsl-188-155-176-92.adslplus.ch. [188.155.176.92]) by smtp.gmail.com with ESMTPSA id g4-20020adfbc84000000b0020c5253d8f3sm1477760wrh.63.2022.05.12.23.14.20 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 12 May 2022 23:14:21 -0700 (PDT) From: Krzysztof Kozlowski To: Andy Gross , Bjorn Andersson , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Viresh Kumar , Nishanth Menon , Alim Akhtar , Avri Altman , "James E.J. Bottomley" , "Martin K. Petersen" , "Rafael J. Wysocki" , Taniya Das , linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, linux-scsi@vger.kernel.org Cc: Krzysztof Kozlowski , Manivannan Sadhasivam Subject: [PATCH v3 7/7] ufs: use PM OPP when scaling gears Date: Fri, 13 May 2022 08:13:47 +0200 Message-Id: <20220513061347.46480-8-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20220513061347.46480-1-krzysztof.kozlowski@linaro.org> References: <20220513061347.46480-1-krzysztof.kozlowski@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-scsi@vger.kernel.org Scaling gears requires not only scaling clocks, but also voltage levels, e.g. via performance states. Use the provided OPP table, to set proper OPP frequency which through required-opps will trigger performance state change. This deprecates the old freq-table-hz Devicetree property and old clock scaling method in favor of PM core code. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Bjorn Andersson --- Cc: Manivannan Sadhasivam --- drivers/scsi/ufs/ufshcd-pltfrm.c | 73 +++++++++++++++ drivers/scsi/ufs/ufshcd.c | 150 ++++++++++++++++++++++++------- drivers/scsi/ufs/ufshcd.h | 6 ++ 3 files changed, 195 insertions(+), 34 deletions(-) diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c index 3ab555f6e66e..a603ca8e383b 100644 --- a/drivers/scsi/ufs/ufshcd-pltfrm.c +++ b/drivers/scsi/ufs/ufshcd-pltfrm.c @@ -10,6 +10,7 @@ #include #include +#include #include #include @@ -108,6 +109,72 @@ static int ufshcd_parse_clock_info(struct ufs_hba *hba) return ret; } +static int ufshcd_parse_operating_points(struct ufs_hba *hba) +{ + struct device *dev = hba->dev; + struct device_node *np = dev->of_node; + struct ufs_clk_info *clki; + const char *names[16]; + int cnt, i, ret; + + if (!of_find_property(dev->of_node, "operating-points-v2", NULL)) + return 0; + + cnt = of_property_count_strings(np, "clock-names"); + if (cnt <= 0) { + dev_warn(dev, "%s: Missing clock-names\n", + __func__); + return -EINVAL; + } + + if (cnt > ARRAY_SIZE(names)) { + dev_info(dev, "%s: Too many clock-names\n", __func__); + return -EINVAL; + } + + if (of_find_property(np, "freq-table-hz", NULL)) { + dev_info(dev, "%s: operating-points and freq-table-hz are incompatible\n", + __func__); + return -EINVAL; + } + + for (i = 0; i < cnt; i++) { + ret = of_property_read_string_index(np, "clock-names", i, + &names[i]); + if (ret) + return ret; + + clki = devm_kzalloc(dev, sizeof(*clki), GFP_KERNEL); + if (!clki) + return -ENOMEM; + + clki->name = devm_kstrdup(dev, names[i], GFP_KERNEL); + if (!clki->name) + return -ENOMEM; + + if (!strcmp(names[i], "ref_clk")) + clki->keep_link_active = true; + + list_add_tail(&clki->list, &hba->clk_list_head); + } + + ret = devm_pm_opp_set_clknames(dev, names, i); + if (ret) + return ret; + + ret = devm_pm_opp_register_set_opp_helper(dev, ufshcd_set_opp); + if (ret) + return ret; + + ret = devm_pm_opp_of_add_table(dev); + if (ret) + return ret; + + hba->use_pm_opp = true; + + return 0; +} + #define MAX_PROP_SIZE 32 static int ufshcd_populate_vreg(struct device *dev, const char *name, struct ufs_vreg **out_vreg) @@ -363,6 +430,12 @@ int ufshcd_pltfrm_init(struct platform_device *pdev, goto dealloc_host; } + err = ufshcd_parse_operating_points(hba); + if (err) { + dev_err(dev, "%s: OPP parse failed %d\n", __func__, err); + goto dealloc_host; + } + ufshcd_init_lanes_per_dir(hba); err = ufshcd_init(hba, mmio_base, irq); diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index ea43aa2d26e1..9f07c4fd0087 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -259,7 +260,8 @@ static int ufshcd_host_reset_and_restore(struct ufs_hba *hba); static void ufshcd_resume_clkscaling(struct ufs_hba *hba); static void ufshcd_suspend_clkscaling(struct ufs_hba *hba); static void __ufshcd_suspend_clkscaling(struct ufs_hba *hba); -static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up); +static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up, + unsigned long freq); static irqreturn_t ufshcd_intr(int irq, void *__hba); static int ufshcd_change_power_mode(struct ufs_hba *hba, struct ufs_pa_layer_attr *pwr_mode); @@ -962,7 +964,7 @@ static bool ufshcd_is_unipro_pa_params_tuning_req(struct ufs_hba *hba) } /** - * ufshcd_set_clk_freq - set UFS controller clock frequencies + * ufshcd_set_clk_freq - set UFS controller clock frequencies (directly) * @hba: per adapter instance * @scale_up: If True, set max possible frequency othewise set low frequency * @@ -1024,15 +1026,48 @@ static int ufshcd_set_clk_freq(struct ufs_hba *hba, bool scale_up) return ret; } +/** + * ufshcd_set_opp - scale UFS controller clocks, called via PM OPP + * @data: PM OPP data + * + * Returns 0 for success, non-zero error value for errors. + */ +int ufshcd_set_opp(struct dev_pm_set_opp_data *data) +{ + struct ufs_hba *hba = dev_get_drvdata(data->dev); + int i, ret; + + if (!data->clk_count) + return 0; + + for (i = 0; i < data->clk_count; i++) { + if (!data->new_opp.rates[i]) + continue; + + ret = clk_set_rate(data->clks[i].clk, data->new_opp.rates[i]); + if (ret) { + dev_err(hba->dev, "%s: %pC clk set rate(%luHz) failed, %d\n", + __func__, data->clks[i].clk, + data->new_opp.rates[i], ret); + break; + } + } + + return ret; +} +EXPORT_SYMBOL_GPL(ufshcd_set_opp); + /** * ufshcd_scale_clks - scale up or scale down UFS controller clocks * @hba: per adapter instance * @scale_up: True if scaling up and false if scaling down + * @freq: Target frequency * * Returns 0 if successful * Returns < 0 for any other errors */ -static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up) +static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up, + unsigned long freq) { int ret = 0; ktime_t start = ktime_get(); @@ -1041,13 +1076,21 @@ static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up) if (ret) goto out; - ret = ufshcd_set_clk_freq(hba, scale_up); + if (hba->use_pm_opp) + ret = dev_pm_opp_set_rate(hba->dev, freq); + else + ret = ufshcd_set_clk_freq(hba, scale_up); if (ret) goto out; ret = ufshcd_vops_clk_scale_notify(hba, scale_up, POST_CHANGE); - if (ret) - ufshcd_set_clk_freq(hba, !scale_up); + if (ret) { + if (hba->use_pm_opp) + dev_pm_opp_set_rate(hba->dev, + hba->devfreq->previous_freq); + else + ufshcd_set_clk_freq(hba, !scale_up); + } out: trace_ufshcd_profile_clk_scaling(dev_name(hba->dev), @@ -1059,11 +1102,13 @@ static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up) /** * ufshcd_is_devfreq_scaling_required - check if scaling is required or not * @hba: per adapter instance + * @freq: Target frequency * @scale_up: True if scaling up and false if scaling down * * Returns true if scaling is required, false otherwise. */ static bool ufshcd_is_devfreq_scaling_required(struct ufs_hba *hba, + unsigned long freq, bool scale_up) { struct ufs_clk_info *clki; @@ -1072,6 +1117,9 @@ static bool ufshcd_is_devfreq_scaling_required(struct ufs_hba *hba, if (list_empty(head)) return false; + if (hba->use_pm_opp) + return freq != hba->clk_scaling.target_freq; + list_for_each_entry(clki, head, list) { if (!IS_ERR_OR_NULL(clki->clk)) { if (scale_up && clki->max_freq) { @@ -1251,13 +1299,15 @@ static void ufshcd_clock_scaling_unprepare(struct ufs_hba *hba, bool writelock) /** * ufshcd_devfreq_scale - scale up/down UFS clocks and gear * @hba: per adapter instance + * @freq: Target frequency * @scale_up: True for scaling up and false for scalin down * * Returns 0 for success, * Returns -EBUSY if scaling can't happen at this time * Returns non-zero for any other errors */ -static int ufshcd_devfreq_scale(struct ufs_hba *hba, bool scale_up) +static int ufshcd_devfreq_scale(struct ufs_hba *hba, unsigned long freq, + bool scale_up) { int ret = 0; bool is_writelock = true; @@ -1273,7 +1323,7 @@ static int ufshcd_devfreq_scale(struct ufs_hba *hba, bool scale_up) goto out_unprepare; } - ret = ufshcd_scale_clks(hba, scale_up); + ret = ufshcd_scale_clks(hba, scale_up, freq); if (ret) { if (!scale_up) ufshcd_scale_gear(hba, true); @@ -1284,7 +1334,8 @@ static int ufshcd_devfreq_scale(struct ufs_hba *hba, bool scale_up) if (scale_up) { ret = ufshcd_scale_gear(hba, true); if (ret) { - ufshcd_scale_clks(hba, false); + ufshcd_scale_clks(hba, false, + hba->devfreq->previous_freq); goto out_unprepare; } } @@ -1347,9 +1398,20 @@ static int ufshcd_devfreq_target(struct device *dev, if (!ufshcd_is_clkscaling_supported(hba)) return -EINVAL; - clki = list_first_entry(&hba->clk_list_head, struct ufs_clk_info, list); /* Override with the closest supported frequency */ - *freq = (unsigned long) clk_round_rate(clki->clk, *freq); + if (hba->use_pm_opp) { + struct dev_pm_opp *opp; + + opp = devfreq_recommended_opp(dev, freq, flags); + if (IS_ERR(opp)) + return PTR_ERR(opp); + dev_pm_opp_put(opp); + } else { + clki = list_first_entry(&hba->clk_list_head, struct ufs_clk_info, + list); + *freq = (unsigned long) clk_round_rate(clki->clk, *freq); + } + spin_lock_irqsave(hba->host->host_lock, irq_flags); if (ufshcd_eh_in_progress(hba)) { spin_unlock_irqrestore(hba->host->host_lock, irq_flags); @@ -1365,11 +1427,11 @@ static int ufshcd_devfreq_target(struct device *dev, } /* Decide based on the rounded-off frequency and update */ - scale_up = *freq == clki->max_freq; - if (!scale_up) + scale_up = (*freq > hba->clk_scaling.target_freq); + if (!hba->use_pm_opp && !scale_up) *freq = clki->min_freq; /* Update the frequency */ - if (!ufshcd_is_devfreq_scaling_required(hba, scale_up)) { + if (!ufshcd_is_devfreq_scaling_required(hba, *freq, scale_up)) { spin_unlock_irqrestore(hba->host->host_lock, irq_flags); ret = 0; goto out; /* no state change required */ @@ -1377,7 +1439,9 @@ static int ufshcd_devfreq_target(struct device *dev, spin_unlock_irqrestore(hba->host->host_lock, irq_flags); start = ktime_get(); - ret = ufshcd_devfreq_scale(hba, scale_up); + ret = ufshcd_devfreq_scale(hba, *freq, scale_up); + if (!ret) + hba->clk_scaling.target_freq = *freq; trace_ufshcd_profile_clk_scaling(dev_name(hba->dev), (scale_up ? "up" : "down"), @@ -1397,8 +1461,6 @@ static int ufshcd_devfreq_get_dev_status(struct device *dev, struct ufs_hba *hba = dev_get_drvdata(dev); struct ufs_clk_scaling *scaling = &hba->clk_scaling; unsigned long flags; - struct list_head *clk_list = &hba->clk_list_head; - struct ufs_clk_info *clki; ktime_t curr_t; if (!ufshcd_is_clkscaling_supported(hba)) @@ -1411,13 +1473,20 @@ static int ufshcd_devfreq_get_dev_status(struct device *dev, if (!scaling->window_start_t) goto start_window; - clki = list_first_entry(clk_list, struct ufs_clk_info, list); - /* - * If current frequency is 0, then the ondemand governor considers - * there's no initial frequency set. And it always requests to set - * to max. frequency. - */ - stat->current_frequency = clki->curr_freq; + if (hba->use_pm_opp) { + stat->current_frequency = hba->clk_scaling.target_freq; + } else { + struct list_head *clk_list = &hba->clk_list_head; + struct ufs_clk_info *clki; + + clki = list_first_entry(clk_list, struct ufs_clk_info, list); + /* + * If current frequency is 0, then the ondemand governor considers + * there's no initial frequency set. And it always requests to set + * to max. frequency. + */ + stat->current_frequency = clki->curr_freq; + } if (scaling->is_busy_started) scaling->tot_busy_t += ktime_us_delta(curr_t, scaling->busy_start_t); @@ -1450,9 +1519,11 @@ static int ufshcd_devfreq_init(struct ufs_hba *hba) if (list_empty(clk_list)) return 0; - clki = list_first_entry(clk_list, struct ufs_clk_info, list); - dev_pm_opp_add(hba->dev, clki->min_freq, 0); - dev_pm_opp_add(hba->dev, clki->max_freq, 0); + if (!hba->use_pm_opp) { + clki = list_first_entry(clk_list, struct ufs_clk_info, list); + dev_pm_opp_add(hba->dev, clki->min_freq, 0); + dev_pm_opp_add(hba->dev, clki->max_freq, 0); + } ufshcd_vops_config_scaling_param(hba, &hba->vps->devfreq_profile, &hba->vps->ondemand_data); @@ -1464,8 +1535,10 @@ static int ufshcd_devfreq_init(struct ufs_hba *hba) ret = PTR_ERR(devfreq); dev_err(hba->dev, "Unable to register with devfreq %d\n", ret); - dev_pm_opp_remove(hba->dev, clki->min_freq); - dev_pm_opp_remove(hba->dev, clki->max_freq); + if (!hba->use_pm_opp) { + dev_pm_opp_remove(hba->dev, clki->min_freq); + dev_pm_opp_remove(hba->dev, clki->max_freq); + } return ret; } @@ -1477,7 +1550,6 @@ static int ufshcd_devfreq_init(struct ufs_hba *hba) static void ufshcd_devfreq_remove(struct ufs_hba *hba) { struct list_head *clk_list = &hba->clk_list_head; - struct ufs_clk_info *clki; if (!hba->devfreq) return; @@ -1485,9 +1557,13 @@ static void ufshcd_devfreq_remove(struct ufs_hba *hba) devfreq_remove_device(hba->devfreq); hba->devfreq = NULL; - clki = list_first_entry(clk_list, struct ufs_clk_info, list); - dev_pm_opp_remove(hba->dev, clki->min_freq); - dev_pm_opp_remove(hba->dev, clki->max_freq); + if (!hba->use_pm_opp) { + struct ufs_clk_info *clki; + + clki = list_first_entry(clk_list, struct ufs_clk_info, list); + dev_pm_opp_remove(hba->dev, clki->min_freq); + dev_pm_opp_remove(hba->dev, clki->max_freq); + } } static void __ufshcd_suspend_clkscaling(struct ufs_hba *hba) @@ -1571,8 +1647,14 @@ static ssize_t ufshcd_clkscale_enable_store(struct device *dev, if (value) { ufshcd_resume_clkscaling(hba); } else { + struct dev_pm_opp *opp; + unsigned long freq = ULONG_MAX; + + opp = dev_pm_opp_find_freq_floor(dev, &freq); + dev_pm_opp_put(opp); + ufshcd_suspend_clkscaling(hba); - err = ufshcd_devfreq_scale(hba, true); + err = ufshcd_devfreq_scale(hba, freq, true); if (err) dev_err(hba->dev, "%s: failed to scale clocks up %d\n", __func__, err); diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index 0b8d0192f069..6962d36e6c65 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -400,6 +400,7 @@ struct ufs_saved_pwr_info { * @is_initialized: Indicates whether clock scaling is initialized or not * @is_busy_started: tracks if busy period has started or not * @is_suspended: tracks if devfreq is suspended or not + * @target_freq: frequency requested by devfreq framework */ struct ufs_clk_scaling { int active_reqs; @@ -417,6 +418,7 @@ struct ufs_clk_scaling { bool is_initialized; bool is_busy_started; bool is_suspended; + unsigned long target_freq; }; #define UFS_EVENT_HIST_LENGTH 8 @@ -771,6 +773,8 @@ struct ufs_hba_monitor { * @auto_bkops_enabled: to track whether bkops is enabled in device * @vreg_info: UFS device voltage regulator information * @clk_list_head: UFS host controller clocks list node head + * @use_pm_opp: whether OPP table is provided and scaling gears should trigger + * setting OPP * @req_abort_count: number of times ufshcd_abort() has been called * @lanes_per_direction: number of lanes per data direction between the UFS * controller and the UFS device. @@ -906,6 +910,7 @@ struct ufs_hba { bool auto_bkops_enabled; struct ufs_vreg_info vreg_info; struct list_head clk_list_head; + bool use_pm_opp; /* Number of requests aborts */ int req_abort_count; @@ -1037,6 +1042,7 @@ void ufshcd_remove(struct ufs_hba *); int ufshcd_uic_hibern8_enter(struct ufs_hba *hba); int ufshcd_uic_hibern8_exit(struct ufs_hba *hba); void ufshcd_delay_us(unsigned long us, unsigned long tolerance); +int ufshcd_set_opp(struct dev_pm_set_opp_data *data); void ufshcd_parse_dev_ref_clk_freq(struct ufs_hba *hba, struct clk *refclk); void ufshcd_update_evt_hist(struct ufs_hba *hba, u32 id, u32 val); void ufshcd_hba_stop(struct ufs_hba *hba);