From patchwork Wed Jul 13 07:29:42 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Xin Ji X-Patchwork-Id: 591335 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 39E67C433EF for ; Wed, 13 Jul 2022 07:30:14 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234495AbiGMHaM (ORCPT ); Wed, 13 Jul 2022 03:30:12 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56758 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229968AbiGMHaL (ORCPT ); Wed, 13 Jul 2022 03:30:11 -0400 Received: from NAM04-MW2-obe.outbound.protection.outlook.com (mail-mw2nam04on2111.outbound.protection.outlook.com [40.107.101.111]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id D8D58638E; Wed, 13 Jul 2022 00:30:10 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=nESftbGQoT/cOsPM1xiJ2gMZzKOqtROPCjV4Arh1eeMsluRCE2Pu7hKAiGndMfgqzaylaPZ+3+jZRK6BQwBSe64Jsu9JBrCoP+4w/8AFm0blIIBAk5uZVaM1FnKx6wqoLFuUaDIllepLH/6b0d5NPMGEl9A5MSjY1dSzeIaHEhT3M5XOWqwZ1553v7TKCNC2VlgFteMh+xku4TlXU8NVq1bbrfh+uKjRnWO78g5j2N3WInUkzH+OtFyGXK4I/lprlwWSYfmSpSm5tvHnLrwgQEp7sJ8A5sf08ZBrRnM0ro6PJVftQ/xuFpy7EeLf5G6KgtOKEcJ26jsN3pkhv4g7tQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=DEDY6psZMLhoFuOdfH0DFNckQDVRkGbWV2OwssAvXQ8=; b=mnN0DFhq2BZI2AeXlEESsj9GcklDaN25BLsQeyU5NFexu1zS4fX2gKLJi59jrB1yGn/7zYqxHjPpSPFLF+s7WTYX4Fxd8A0Jv3wqc6zP2MrNQxB2irkXnGsReeDiKG48DEkuoRTw0m1fhYMZWzmtW5QeKtfKkCjZCbVoLVZhx9bOfjvH5SV9tZJoXFWwhQCZ6JJ7WRaNByXErxJwLmGYmEFNWcJX12jz+rqd4OxBDShw88VDxq9HfjxMnyB8erXobYrchd2+WD7x6zRx7RHiKcVtPXgItOh5jRDdvRqmV9++diyy9JEG7csSbgQumu9HCZI/rcuBdhDkeBjWdEvpyw== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=analogixsemi.com; dmarc=pass action=none header.from=analogixsemi.com; dkim=pass header.d=analogixsemi.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=Analogixsemi.onmicrosoft.com; s=selector2-Analogixsemi-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=DEDY6psZMLhoFuOdfH0DFNckQDVRkGbWV2OwssAvXQ8=; b=YAg/OVmjkVdyvRRrHHjpLjFchRAMS0MN3isH+CjTQHU6ljioEa9Ps2oriee36ibWBm5Ch+N5alYifCCve5IJpcXDVCoBOxHqsHZQSqUXw3mCj4Yy7s9jfgbpdqPKV/gV228/7EO8tTtX+6BLJ17QvuVVsBjlX4JLTQGOJdkIkTE= Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=analogixsemi.com; Received: from CH2PR04MB6741.namprd04.prod.outlook.com (2603:10b6:610:96::19) by PH0PR04MB7445.namprd04.prod.outlook.com (2603:10b6:510:1b::19) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.5417.20; Wed, 13 Jul 2022 07:30:07 +0000 Received: from CH2PR04MB6741.namprd04.prod.outlook.com ([fe80::5400:a1a0:be8f:34bc]) by CH2PR04MB6741.namprd04.prod.outlook.com ([fe80::5400:a1a0:be8f:34bc%7]) with mapi id 15.20.5417.026; Wed, 13 Jul 2022 07:30:07 +0000 From: Xin Ji To: Greg Kroah-Hartman , Rob Herring , Krzysztof Kozlowski , Xin Ji Cc: bliang@analogixsemi.com, qwen@analogixsemi.com, jli@analogixsemi.com, Rob Herring , linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v17 1/2] dt-bindings: usb: Add analogix anx7411 PD binding Date: Wed, 13 Jul 2022 15:29:42 +0800 Message-Id: <20220713072943.2789612-1-xji@analogixsemi.com> X-Mailer: git-send-email 2.25.1 X-ClientProxiedBy: TYAPR01CA0133.jpnprd01.prod.outlook.com (2603:1096:404:2d::25) To CH2PR04MB6741.namprd04.prod.outlook.com (2603:10b6:610:96::19) MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-Office365-Filtering-Correlation-Id: 00e70acc-d732-437c-a564-08da64a18274 X-MS-TrafficTypeDiagnostic: PH0PR04MB7445:EE_ X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:CH2PR04MB6741.namprd04.prod.outlook.com; PTR:; CAT:NONE; SFS:(13230016)(366004)(346002)(376002)(136003)(396003)(39840400004)(36756003)(186003)(26005)(41300700001)(55236004)(2616005)(6486002)(2906002)(6666004)(6512007)(966005)(478600001)(1076003)(52116002)(8936002)(6506007)(86362001)(5660300002)(66556008)(4326008)(8676002)(316002)(66476007)(7049001)(66946007)(110136005)(38350700002)(38100700002); DIR:OUT; SFP:1102; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: analogixsemi.com X-MS-Exchange-CrossTenant-Network-Message-Id: 00e70acc-d732-437c-a564-08da64a18274 X-MS-Exchange-CrossTenant-AuthSource: CH2PR04MB6741.namprd04.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 13 Jul 2022 07:30:07.0665 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: b099b0b4-f26c-4cf5-9a0f-d5be9acab205 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: 0gUtB/neOib4xz9/IlkESV8KSFFjRFBxPq7wzVPDgj1BaqCJaaNA4FPKOpmxepK80bswIfsy3B4uaQGyRK2s/A== X-MS-Exchange-Transport-CrossTenantHeadersStamped: PH0PR04MB7445 Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org Add analogix PD chip anx7411 device binding Reviewed-by: Rob Herring Signed-off-by: Xin Ji --- v16 -> v17 : Add node name "usb_typec" v15 -> v16 : No changes v14 -> v15 : No changes v13 -> v14 : 1. Fix Robot compile error. Fix node name not correct. 2. Change HEX to lowercase. 3. Use "ports" property. v12 -> v13 : 1. Drop the quotes for "$id" and "$schema" 2. Remove "allOf" label 3. Change node name from "i2c1" to "i2c" 4. Change node name from "typec" to "usb-typec" --- .../bindings/usb/analogix,anx7411.yaml | 81 +++++++++++++++++++ 1 file changed, 81 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/analogix,anx7411.yaml diff --git a/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml new file mode 100644 index 000000000000..60aac5765320 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/analogix,anx7411.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analogix ANX7411 Type-C controller bindings + +maintainers: + - Xin Ji + +properties: + compatible: + enum: + - analogix,anx7411 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + connector: + type: object + $ref: ../connector/usb-connector.yaml + description: + Properties for usb c connector. + + properties: + compatible: + const: usb-c-connector + + power-role: true + + data-role: true + + try-power-role: true + + required: + - compatible + +required: + - compatible + - reg + - connector + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + usb_typec: anx7411@2c { + compatible = "analogix,anx7411"; + reg = <0x2c>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio0>; + + typec_con: connector { + compatible = "usb-c-connector"; + power-role = "dual"; + data-role = "dual"; + try-power-role = "source"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + typec_con_ep: endpoint { + remote-endpoint = <&usbotg_hs_ep>; + }; + }; + }; + }; + }; + }; +... From patchwork Wed Jul 13 07:29:43 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Xin Ji X-Patchwork-Id: 590277 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id F25C6C433EF for ; Wed, 13 Jul 2022 07:30:28 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234672AbiGMHa1 (ORCPT ); Wed, 13 Jul 2022 03:30:27 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:57032 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229968AbiGMHa0 (ORCPT ); Wed, 13 Jul 2022 03:30:26 -0400 Received: from NAM04-MW2-obe.outbound.protection.outlook.com (mail-mw2nam04on2129.outbound.protection.outlook.com [40.107.101.129]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id DDCEDE474F; Wed, 13 Jul 2022 00:30:21 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=PTMuJ1KT9CqKv8EVVRCn00RCRbP73fdxtol0YCMuU8MMDeuTYHwtDh6/wSj58Kdx4+S7+Y+ffJiSH+YUhWf0ADk0878nm/9HNaIq0Z8FsneSkQgSBlGagLPgeOzr6yMIcau1e2aExTwDK64LseYmvdgQbrggo1hTlEJeS0iZU5Hn4DNC+RkG9fMDg0B06meI3M9Bi+kZ//2OKmQmvDP5NjksCvnxYXPVDxpshDRdTesdaRd/+9kG8PYv1FDFMQ9hfevagVhkq1GlPVuviWlYz5S3IcMdIrAvQXW2mVYpmK4y8Mp6B22zFHrcGDIpElTDYpj+LYjIIxB7PM+SnjqHmQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=XDokLIw6eksXQIP9aKzumjR3xLVGBP09fo8+sYji/as=; b=E/ttJwEf6RBJG9o7JLJSym66se2Od0FZApLQPDm7Glgx89qZM2cd4/K8p42I9ALl3byP+OzF4eI/8j49Jx7d2d5t3GnWyt57nM9Qw1I0hMNvQN4HT4jeGF7Bq5afmv5n8/ijdS5Jx1UcSIyGJ3XWr26xQUIPOdgSVAdU8RqDAdRFTjZUh+cFADCwMnm4PQxtH2GzfWqNWDTt6n8wEjQ5uoNdqkg5s4jL+blXdDEg7hgUQLKvxLXtUXfvOw+yWjR1YXMGRFla2kDKSYuzjvRhwshm1i258Wndf/ED6MjD61ZZ4Sq9FBx6gOjq7JCqavmgWQ3Zh8GtnHO5trnyZbKr2A== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=analogixsemi.com; dmarc=pass action=none header.from=analogixsemi.com; dkim=pass header.d=analogixsemi.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=Analogixsemi.onmicrosoft.com; s=selector2-Analogixsemi-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=XDokLIw6eksXQIP9aKzumjR3xLVGBP09fo8+sYji/as=; b=GsY6kQWsf8vWiOy3Y/apNvLrlsKHIrcxDIuQdhfiTNGFonNi2t8A7K76xbtwMe3dVct3tRQ7ysk8v7DchfwflDZ7gXd5ZQm3F+xejU2HZUdXBaCU7G63BEyw6DunZOvhs5rovH/xI2jb8TfhoEtgEJCiMDFKBP4IU3THSPEUhPI= Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=analogixsemi.com; Received: from CH2PR04MB6741.namprd04.prod.outlook.com (2603:10b6:610:96::19) by PH0PR04MB7445.namprd04.prod.outlook.com (2603:10b6:510:1b::19) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.5417.20; Wed, 13 Jul 2022 07:30:19 +0000 Received: from CH2PR04MB6741.namprd04.prod.outlook.com ([fe80::5400:a1a0:be8f:34bc]) by CH2PR04MB6741.namprd04.prod.outlook.com ([fe80::5400:a1a0:be8f:34bc%7]) with mapi id 15.20.5417.026; Wed, 13 Jul 2022 07:30:19 +0000 From: Xin Ji To: Heikki Krogerus , Greg Kroah-Hartman Cc: bliang@analogixsemi.com, qwen@analogixsemi.com, jli@analogixsemi.com, Xin Ji , linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org Subject: [PATCH v17 2/2] usb: typec: anx7411: Add Analogix PD ANX7411 support Date: Wed, 13 Jul 2022 15:29:43 +0800 Message-Id: <20220713072943.2789612-2-xji@analogixsemi.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20220713072943.2789612-1-xji@analogixsemi.com> References: <20220713072943.2789612-1-xji@analogixsemi.com> X-ClientProxiedBy: TYAPR01CA0108.jpnprd01.prod.outlook.com (2603:1096:404:2a::24) To CH2PR04MB6741.namprd04.prod.outlook.com (2603:10b6:610:96::19) MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-Office365-Filtering-Correlation-Id: 14a4b51e-e2b6-46ea-f18d-08da64a189d3 X-MS-TrafficTypeDiagnostic: PH0PR04MB7445:EE_ X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:CH2PR04MB6741.namprd04.prod.outlook.com; PTR:; CAT:NONE; SFS:(13230016)(366004)(346002)(376002)(136003)(396003)(39840400004)(36756003)(186003)(26005)(41300700001)(55236004)(2616005)(6486002)(2906002)(6666004)(6512007)(478600001)(1076003)(83380400001)(52116002)(8936002)(6506007)(30864003)(86362001)(5660300002)(66556008)(4326008)(8676002)(316002)(66476007)(66946007)(110136005)(38350700002)(38100700002)(579004); DIR:OUT; SFP:1102; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: analogixsemi.com X-MS-Exchange-CrossTenant-Network-Message-Id: 14a4b51e-e2b6-46ea-f18d-08da64a189d3 X-MS-Exchange-CrossTenant-AuthSource: CH2PR04MB6741.namprd04.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 13 Jul 2022 07:30:19.4519 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: b099b0b4-f26c-4cf5-9a0f-d5be9acab205 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: ZH37GGg4qMvly6zdVP0rmn3GkI+3azsKWF4gsBL6n7aUb4QcZ1tBs6Ycc9SCqzaa9GA5fx7CS6l/nRLnD8RihA== X-MS-Exchange-Transport-CrossTenantHeadersStamped: PH0PR04MB7445 Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org Add driver for analogix ANX7411 USB Type-C DRP port controller. Acked-by: Heikki Krogerus Signed-off-by: Xin Ji --- V16 -> V17 : No changes V15 -> V16 : Remove report Reported-by tag V14 -> V15 : 1. Fix robot compile warning 2. Add function return value check V12 -> V13 : 1. Add driver description 2. Checking return value for each i2c operation V11 -> V12 : Remove all define in anx7411.h to anx7411.c V10 -> V11 : Fix Heikki's comment, code clean up V9 -> V10 : Rebase on the latest code V6 -> V7 : Fix Heikki's comment Rebase on Greg's latest usb-next branch Move tcpci.h to include/linux/usb/ Remove double definition V5 -> V6 : Fix Heikki's comment V4 -> V5 : Fix Greg h-k comment, remove DEBUG define V3 -> V4 : Fix compiling waring V2 -> V3 : Add changelog history V1 -> V2 : Fix compiling warning issue --- drivers/usb/typec/Kconfig | 11 + drivers/usb/typec/Makefile | 1 + drivers/usb/typec/anx7411.c | 1596 +++++++++++++++++++++++++++++++++++ 3 files changed, 1608 insertions(+) create mode 100644 drivers/usb/typec/anx7411.c diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig index ba24847fb245..5defdfead653 100644 --- a/drivers/usb/typec/Kconfig +++ b/drivers/usb/typec/Kconfig @@ -52,6 +52,17 @@ source "drivers/usb/typec/ucsi/Kconfig" source "drivers/usb/typec/tipd/Kconfig" +config TYPEC_ANX7411 + tristate "Analogix ANX7411 Type-C DRP Port controller driver" + depends on I2C + depends on USB_ROLE_SWITCH + help + Say Y or M here if your system has Analogix ANX7411 Type-C DRP Port + controller driver. + + If you choose to build this driver as a dynamically linked module, the + module will be called anx7411.ko. + config TYPEC_RT1719 tristate "Richtek RT1719 Sink Only Type-C controller driver" depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile index 2f174cd3e5df..dac5c11a3234 100644 --- a/drivers/usb/typec/Makefile +++ b/drivers/usb/typec/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_TYPEC) += altmodes/ obj-$(CONFIG_TYPEC_TCPM) += tcpm/ obj-$(CONFIG_TYPEC_UCSI) += ucsi/ obj-$(CONFIG_TYPEC_TPS6598X) += tipd/ +obj-$(CONFIG_TYPEC_ANX7411) += anx7411.o obj-$(CONFIG_TYPEC_HD3SS3220) += hd3ss3220.o obj-$(CONFIG_TYPEC_QCOM_PMIC) += qcom-pmic-typec.o obj-$(CONFIG_TYPEC_STUSB160X) += stusb160x.o diff --git a/drivers/usb/typec/anx7411.c b/drivers/usb/typec/anx7411.c new file mode 100644 index 000000000000..b990376991f8 --- /dev/null +++ b/drivers/usb/typec/anx7411.c @@ -0,0 +1,1596 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* + * Driver for Analogix ANX7411 USB Type-C and PD controller + * + * Copyright(c) 2022, Analogix Semiconductor. All rights reserved. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define TCPC_ADDRESS1 0x58 +#define TCPC_ADDRESS2 0x56 +#define TCPC_ADDRESS3 0x54 +#define TCPC_ADDRESS4 0x52 +#define SPI_ADDRESS1 0x7e +#define SPI_ADDRESS2 0x6e +#define SPI_ADDRESS3 0x64 +#define SPI_ADDRESS4 0x62 + +struct anx7411_i2c_select { + u8 tcpc_address; + u8 spi_address; +}; + +#define VID_ANALOGIX 0x1F29 +#define PID_ANALOGIX 0x7411 + +/* TCPC register define */ + +#define ANALOG_CTRL_10 0xAA + +#define STATUS_LEN 2 +#define ALERT_0 0xCB +#define RECEIVED_MSG BIT(7) +#define SOFTWARE_INT BIT(6) +#define MSG_LEN 32 +#define HEADER_LEN 2 +#define MSG_HEADER 0x00 +#define MSG_TYPE 0x01 +#define MSG_RAWDATA 0x02 +#define MSG_LEN_MASK 0x1F + +#define ALERT_1 0xCC +#define INTP_POW_ON BIT(7) +#define INTP_POW_OFF BIT(6) + +#define VBUS_THRESHOLD_H 0xDD +#define VBUS_THRESHOLD_L 0xDE + +#define FW_CTRL_0 0xF0 +#define UNSTRUCT_VDM_EN BIT(0) +#define DELAY_200MS BIT(1) +#define VSAFE0 0 +#define VSAFE1 BIT(2) +#define VSAFE2 BIT(3) +#define VSAFE3 (BIT(2) | BIT(3)) +#define FRS_EN BIT(7) + +#define FW_PARAM 0xF1 +#define DONGLE_IOP BIT(0) + +#define FW_CTRL_2 0xF7 +#define SINK_CTRL_DIS_FLAG BIT(5) + +/* SPI register define */ +#define OCM_CTRL_0 0x6E +#define OCM_RESET BIT(6) + +#define MAX_VOLTAGE 0xAC +#define MAX_POWER 0xAD +#define MIN_POWER 0xAE + +#define REQUEST_VOLTAGE 0xAF +#define VOLTAGE_UNIT 100 /* mV per unit */ + +#define REQUEST_CURRENT 0xB1 +#define CURRENT_UNIT 50 /* mA per unit */ + +#define CMD_SEND_BUF 0xC0 +#define CMD_RECV_BUF 0xE0 + +#define REQ_VOL_20V_IN_100MV 0xC8 +#define REQ_CUR_2_25A_IN_50MA 0x2D +#define REQ_CUR_3_25A_IN_50MA 0x41 + +#define DEF_5V 5000 +#define DEF_1_5A 1500 + +#define LOBYTE(w) ((u8)((w) & 0xFF)) +#define HIBYTE(w) ((u8)(((u16)(w) >> 8) & 0xFF)) + +enum anx7411_typec_message_type { + TYPE_SRC_CAP = 0x00, + TYPE_SNK_CAP = 0x01, + TYPE_SNK_IDENTITY = 0x02, + TYPE_SVID = 0x03, + TYPE_SET_SNK_DP_CAP = 0x08, + TYPE_PSWAP_REQ = 0x10, + TYPE_DSWAP_REQ = 0x11, + TYPE_VDM = 0x14, + TYPE_OBJ_REQ = 0x16, + TYPE_DP_ALT_ENTER = 0x19, + TYPE_DP_DISCOVER_MODES_INFO = 0x27, + TYPE_GET_DP_CONFIG = 0x29, + TYPE_DP_CONFIGURE = 0x2A, + TYPE_GET_DP_DISCOVER_MODES_INFO = 0x2E, + TYPE_GET_DP_ALT_ENTER = 0x2F, +}; + +#define FW_CTRL_1 0xB2 +#define AUTO_PD_EN BIT(1) +#define TRYSRC_EN BIT(2) +#define TRYSNK_EN BIT(3) +#define FORCE_SEND_RDO BIT(6) + +#define FW_VER 0xB4 +#define FW_SUBVER 0xB5 + +#define INT_MASK 0xB6 +#define INT_STS 0xB7 +#define OCM_BOOT_UP BIT(0) +#define OC_OV_EVENT BIT(1) +#define VCONN_CHANGE BIT(2) +#define VBUS_CHANGE BIT(3) +#define CC_STATUS_CHANGE BIT(4) +#define DATA_ROLE_CHANGE BIT(5) +#define PR_CONSUMER_GOT_POWER BIT(6) +#define HPD_STATUS_CHANGE BIT(7) + +#define SYSTEM_STSTUS 0xB8 +/* 0: SINK off; 1: SINK on */ +#define SINK_STATUS BIT(1) +/* 0: VCONN off; 1: VCONN on*/ +#define VCONN_STATUS BIT(2) +/* 0: vbus off; 1: vbus on*/ +#define VBUS_STATUS BIT(3) +/* 1: host; 0:device*/ +#define DATA_ROLE BIT(5) +/* 0: Chunking; 1: Unchunked*/ +#define SUPPORT_UNCHUNKING BIT(6) +/* 0: HPD low; 1: HPD high*/ +#define HPD_STATUS BIT(7) + +#define DATA_DFP 1 +#define DATA_UFP 2 +#define POWER_SOURCE 1 +#define POWER_SINK 2 + +#define CC_STATUS 0xB9 +#define CC1_RD BIT(0) +#define CC2_RD BIT(4) +#define CC1_RA BIT(1) +#define CC2_RA BIT(5) +#define CC1_RD BIT(0) +#define CC1_RP(cc) (((cc) >> 2) & 0x03) +#define CC2_RP(cc) (((cc) >> 6) & 0x03) + +#define PD_REV_INIT 0xBA + +#define PD_EXT_MSG_CTRL 0xBB +#define SRC_CAP_EXT_REPLY BIT(0) +#define MANUFACTURER_INFO_REPLY BIT(1) +#define BATTERY_STS_REPLY BIT(2) +#define BATTERY_CAP_REPLY BIT(3) +#define ALERT_REPLY BIT(4) +#define STATUS_REPLY BIT(5) +#define PPS_STATUS_REPLY BIT(6) +#define SNK_CAP_EXT_REPLY BIT(7) + +#define NO_CONNECT 0x00 +#define USB3_1_CONNECTED 0x01 +#define DP_ALT_4LANES 0x02 +#define USB3_1_DP_2LANES 0x03 +#define CC1_CONNECTED 0x01 +#define CC2_CONNECTED 0x02 +#define SELECT_PIN_ASSIGMENT_C 0x04 +#define SELECT_PIN_ASSIGMENT_D 0x08 +#define SELECT_PIN_ASSIGMENT_E 0x10 +#define SELECT_PIN_ASSIGMENT_U 0x00 +#define REDRIVER_ADDRESS 0x20 +#define REDRIVER_OFFSET 0x00 + +#define DP_SVID 0xFF01 +#define VDM_ACK 0x40 +#define VDM_CMD_RES 0x00 +#define VDM_CMD_DIS_ID 0x01 +#define VDM_CMD_DIS_SVID 0x02 +#define VDM_CMD_DIS_MOD 0x03 +#define VDM_CMD_ENTER_MODE 0x04 +#define VDM_CMD_EXIT_MODE 0x05 +#define VDM_CMD_ATTENTION 0x06 +#define VDM_CMD_GET_STS 0x10 +#define VDM_CMD_AND_ACK_MASK 0x5F + +#define MAX_ALTMODE 2 + +#define HAS_SOURCE_CAP BIT(0) +#define HAS_SINK_CAP BIT(1) +#define HAS_SINK_WATT BIT(2) + +enum anx7411_psy_state { + /* copy from drivers/usb/typec/tcpm */ + ANX7411_PSY_OFFLINE = 0, + ANX7411_PSY_FIXED_ONLINE, + + /* private */ + /* PD keep in, but disconnct power to bq25700, + * this state can be active when higher capacity adapter plug in, + * and change to ONLINE state when higher capacity adapter plug out + */ + ANX7411_PSY_HANG = 0xff, +}; + +struct typec_params { + int request_current; /* ma */ + int request_voltage; /* mv */ + int cc_connect; + int cc_orientation_valid; + int cc_status; + int data_role; + int power_role; + int vconn_role; + int dp_altmode_enter; + int cust_altmode_enter; + struct usb_role_switch *role_sw; + struct typec_port *port; + struct typec_partner *partner; + struct typec_mux_dev *typec_mux; + struct typec_switch_dev *typec_switch; + struct typec_altmode *amode[MAX_ALTMODE]; + struct typec_altmode *port_amode[MAX_ALTMODE]; + struct typec_displayport_data data; + int pin_assignment; + struct typec_capability caps; + u32 src_pdo[PDO_MAX_OBJECTS]; + u32 sink_pdo[PDO_MAX_OBJECTS]; + u8 caps_flags; + u8 src_pdo_nr; + u8 sink_pdo_nr; + u8 sink_watt; + u8 sink_voltage; +}; + +#define MAX_BUF_LEN 30 +struct fw_msg { + u8 msg_len; + u8 msg_type; + u8 buf[MAX_BUF_LEN]; +} __packed; + +struct anx7411_data { + int fw_version; + int fw_subversion; + struct i2c_client *tcpc_client; + struct i2c_client *spi_client; + struct fw_msg send_msg; + struct fw_msg recv_msg; + struct gpio_desc *intp_gpiod; + struct fwnode_handle *connector_fwnode; + struct typec_params typec; + int intp_irq; + struct work_struct work; + struct workqueue_struct *workqueue; + /* Lock for interrupt work queue */ + struct mutex lock; + + enum anx7411_psy_state psy_online; + enum power_supply_usb_type usb_type; + struct power_supply *psy; + struct power_supply_desc psy_desc; + struct device *dev; +}; + +static u8 snk_identity[] = { + LOBYTE(VID_ANALOGIX), HIBYTE(VID_ANALOGIX), 0x00, 0x82, /* snk_id_hdr */ + 0x00, 0x00, 0x00, 0x00, /* snk_cert */ + 0x00, 0x00, LOBYTE(PID_ANALOGIX), HIBYTE(PID_ANALOGIX), /* 5snk_ama */ +}; + +static u8 dp_caps[4] = {0xC6, 0x00, 0x00, 0x00}; + +static int anx7411_reg_read(struct i2c_client *client, + u8 reg_addr) +{ + return i2c_smbus_read_byte_data(client, reg_addr); +} + +static int anx7411_reg_block_read(struct i2c_client *client, + u8 reg_addr, u8 len, u8 *buf) +{ + return i2c_smbus_read_i2c_block_data(client, reg_addr, len, buf); +} + +static int anx7411_reg_write(struct i2c_client *client, + u8 reg_addr, u8 reg_val) +{ + return i2c_smbus_write_byte_data(client, reg_addr, reg_val); +} + +static int anx7411_reg_block_write(struct i2c_client *client, + u8 reg_addr, u8 len, u8 *buf) +{ + return i2c_smbus_write_i2c_block_data(client, reg_addr, len, buf); +} + +static struct anx7411_i2c_select anx7411_i2c_addr[] = { + {TCPC_ADDRESS1, SPI_ADDRESS1}, + {TCPC_ADDRESS2, SPI_ADDRESS2}, + {TCPC_ADDRESS3, SPI_ADDRESS3}, + {TCPC_ADDRESS4, SPI_ADDRESS4}, +}; + +static int anx7411_detect_power_mode(struct anx7411_data *ctx) +{ + int ret; + int mode; + + ret = anx7411_reg_read(ctx->spi_client, REQUEST_CURRENT); + if (ret < 0) + return ret; + + ctx->typec.request_current = ret * CURRENT_UNIT; /* 50ma per unit */ + + ret = anx7411_reg_read(ctx->spi_client, REQUEST_VOLTAGE); + if (ret < 0) + return ret; + + ctx->typec.request_voltage = ret * VOLTAGE_UNIT; /* 100mv per unit */ + + if (ctx->psy_online == ANX7411_PSY_OFFLINE) { + ctx->psy_online = ANX7411_PSY_FIXED_ONLINE; + ctx->usb_type = POWER_SUPPLY_USB_TYPE_PD; + power_supply_changed(ctx->psy); + } + + if (!ctx->typec.cc_orientation_valid) + return 0; + + if (ctx->typec.cc_connect == CC1_CONNECTED) + mode = CC1_RP(ctx->typec.cc_status); + else + mode = CC2_RP(ctx->typec.cc_status); + if (mode) { + typec_set_pwr_opmode(ctx->typec.port, mode - 1); + return 0; + } + + typec_set_pwr_opmode(ctx->typec.port, TYPEC_PWR_MODE_PD); + + return 0; +} + +static int anx7411_register_partner(struct anx7411_data *ctx, + int pd, int accessory) +{ + struct typec_partner_desc desc; + + if (ctx->typec.partner) + return 0; + + desc.usb_pd = pd; + desc.accessory = accessory; + desc.identity = NULL; + ctx->typec.partner = typec_register_partner(ctx->typec.port, &desc); + if (IS_ERR(ctx->typec.partner)) { + ctx->typec.partner = NULL; + return PTR_ERR(ctx->typec.partner); + } + + return 0; +} + +static int anx7411_detect_cc_orientation(struct anx7411_data *ctx) +{ + struct device *dev = &ctx->spi_client->dev; + int ret; + int cc1_rd, cc2_rd; + int cc1_ra, cc2_ra; + int cc1_rp, cc2_rp; + + ret = anx7411_reg_read(ctx->spi_client, CC_STATUS); + if (ret < 0) + return ret; + + ctx->typec.cc_status = ret; + + cc1_rd = ret & CC1_RD ? 1 : 0; + cc2_rd = ret & CC2_RD ? 1 : 0; + cc1_ra = ret & CC1_RA ? 1 : 0; + cc2_ra = ret & CC2_RA ? 1 : 0; + cc1_rp = CC1_RP(ret); + cc2_rp = CC2_RP(ret); + + /* Debug cable, nothing to do */ + if (cc1_rd && cc2_rd) { + ctx->typec.cc_orientation_valid = 0; + return anx7411_register_partner(ctx, 0, TYPEC_ACCESSORY_DEBUG); + } + + if (cc1_ra && cc2_ra) { + ctx->typec.cc_orientation_valid = 0; + return anx7411_register_partner(ctx, 0, TYPEC_ACCESSORY_AUDIO); + } + + ctx->typec.cc_orientation_valid = 1; + + ret = anx7411_register_partner(ctx, 1, TYPEC_ACCESSORY_NONE); + if (ret) { + dev_err(dev, "register partner\n"); + return ret; + } + + if (cc1_rd || cc1_rp) { + typec_set_orientation(ctx->typec.port, TYPEC_ORIENTATION_NORMAL); + ctx->typec.cc_connect = CC1_CONNECTED; + } + + if (cc2_rd || cc2_rp) { + typec_set_orientation(ctx->typec.port, TYPEC_ORIENTATION_REVERSE); + ctx->typec.cc_connect = CC2_CONNECTED; + } + + return 0; +} + +static int anx7411_set_mux(struct anx7411_data *ctx, int pin_assignment) +{ + int mode = TYPEC_STATE_SAFE; + + switch (pin_assignment) { + case SELECT_PIN_ASSIGMENT_U: + /* default 4 line USB 3.1 */ + mode = TYPEC_STATE_MODAL; + break; + case SELECT_PIN_ASSIGMENT_C: + case SELECT_PIN_ASSIGMENT_E: + /* 4 line DP */ + mode = TYPEC_STATE_SAFE; + break; + case SELECT_PIN_ASSIGMENT_D: + /* 2 line DP, 2 line USB */ + mode = TYPEC_MODE_USB3; + break; + default: + mode = TYPEC_STATE_SAFE; + break; + } + + ctx->typec.pin_assignment = pin_assignment; + + return typec_set_mode(ctx->typec.port, mode); +} + +static int anx7411_set_usb_role(struct anx7411_data *ctx, enum usb_role role) +{ + if (!ctx->typec.role_sw) + return 0; + + return usb_role_switch_set_role(ctx->typec.role_sw, role); +} + +static int anx7411_data_role_detect(struct anx7411_data *ctx) +{ + int ret; + + ret = anx7411_reg_read(ctx->spi_client, SYSTEM_STSTUS); + if (ret < 0) + return ret; + + ctx->typec.data_role = (ret & DATA_ROLE) ? TYPEC_HOST : TYPEC_DEVICE; + ctx->typec.vconn_role = (ret & VCONN_STATUS) ? TYPEC_SOURCE : TYPEC_SINK; + + typec_set_data_role(ctx->typec.port, ctx->typec.data_role); + + typec_set_vconn_role(ctx->typec.port, ctx->typec.vconn_role); + + if (ctx->typec.data_role == TYPEC_HOST) + return anx7411_set_usb_role(ctx, USB_ROLE_HOST); + + return anx7411_set_usb_role(ctx, USB_ROLE_DEVICE); +} + +static int anx7411_power_role_detect(struct anx7411_data *ctx) +{ + int ret; + + ret = anx7411_reg_read(ctx->spi_client, SYSTEM_STSTUS); + if (ret < 0) + return ret; + + ctx->typec.power_role = (ret & SINK_STATUS) ? TYPEC_SINK : TYPEC_SOURCE; + + if (ctx->typec.power_role == TYPEC_SOURCE) { + ctx->typec.request_current = DEF_1_5A; + ctx->typec.request_voltage = DEF_5V; + } + + typec_set_pwr_role(ctx->typec.port, ctx->typec.power_role); + + return 0; +} + +static int anx7411_cc_status_detect(struct anx7411_data *ctx) +{ + anx7411_detect_cc_orientation(ctx); + anx7411_detect_power_mode(ctx); + + return 0; +} + +static void anx7411_partner_unregister_altmode(struct anx7411_data *ctx) +{ + int i; + + ctx->typec.dp_altmode_enter = 0; + ctx->typec.cust_altmode_enter = 0; + + for (i = 0; i < MAX_ALTMODE; i++) + if (ctx->typec.amode[i]) { + typec_unregister_altmode(ctx->typec.amode[i]); + ctx->typec.amode[i] = NULL; + } + + ctx->typec.pin_assignment = 0; +} + +static int anx7411_typec_register_altmode(struct anx7411_data *ctx, + int svid, int vdo) +{ + struct device *dev = &ctx->spi_client->dev; + struct typec_altmode_desc desc; + int i; + + desc.svid = svid; + desc.vdo = vdo; + + for (i = 0; i < MAX_ALTMODE; i++) + if (!ctx->typec.amode[i]) + break; + + desc.mode = i + 1; /* start with 1 */ + + if (i >= MAX_ALTMODE) { + dev_err(dev, "no altmode space for registering\n"); + return -ENOMEM; + } + + ctx->typec.amode[i] = typec_partner_register_altmode(ctx->typec.partner, + &desc); + if (IS_ERR(ctx->typec.amode[i])) { + dev_err(dev, "failed to register altmode\n"); + ctx->typec.amode[i] = NULL; + return PTR_ERR(ctx->typec.amode); + } + + return 0; +} + +static void anx7411_unregister_partner(struct anx7411_data *ctx) +{ + if (ctx->typec.partner) { + typec_unregister_partner(ctx->typec.partner); + ctx->typec.partner = NULL; + } +} + +static int anx7411_update_altmode(struct anx7411_data *ctx, int svid) +{ + int i; + + if (svid == DP_SVID) + ctx->typec.dp_altmode_enter = 1; + else + ctx->typec.cust_altmode_enter = 1; + + for (i = 0; i < MAX_ALTMODE; i++) { + if (!ctx->typec.amode[i]) + continue; + + if (ctx->typec.amode[i]->svid == svid) { + typec_altmode_update_active(ctx->typec.amode[i], true); + typec_altmode_notify(ctx->typec.amode[i], + ctx->typec.pin_assignment, + &ctx->typec.data); + break; + } + } + + return 0; +} + +static int anx7411_register_altmode(struct anx7411_data *ctx, + bool dp_altmode, u8 *buf) +{ + int ret; + int svid; + int mid; + + if (!ctx->typec.partner) + return 0; + + svid = DP_SVID; + if (dp_altmode) { + mid = buf[0] | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24); + + return anx7411_typec_register_altmode(ctx, svid, mid); + } + + svid = (buf[3] << 8) | buf[2]; + if ((buf[0] & VDM_CMD_AND_ACK_MASK) != (VDM_ACK | VDM_CMD_ENTER_MODE)) + return anx7411_update_altmode(ctx, svid); + + if ((buf[0] & VDM_CMD_AND_ACK_MASK) != (VDM_ACK | VDM_CMD_DIS_MOD)) + return 0; + + mid = buf[4] | (buf[5] << 8) | (buf[6] << 16) | (buf[7] << 24); + + ret = anx7411_typec_register_altmode(ctx, svid, mid); + if (ctx->typec.cust_altmode_enter) + ret |= anx7411_update_altmode(ctx, svid); + + return ret; +} + +static int anx7411_parse_cmd(struct anx7411_data *ctx, u8 type, u8 *buf, u8 len) +{ + struct device *dev = &ctx->spi_client->dev; + u8 cur_50ma, vol_100mv; + + switch (type) { + case TYPE_SRC_CAP: + cur_50ma = anx7411_reg_read(ctx->spi_client, REQUEST_CURRENT); + vol_100mv = anx7411_reg_read(ctx->spi_client, REQUEST_VOLTAGE); + + ctx->typec.request_voltage = vol_100mv * VOLTAGE_UNIT; + ctx->typec.request_current = cur_50ma * CURRENT_UNIT; + + ctx->psy_online = ANX7411_PSY_FIXED_ONLINE; + ctx->usb_type = POWER_SUPPLY_USB_TYPE_PD; + power_supply_changed(ctx->psy); + break; + case TYPE_SNK_CAP: + break; + case TYPE_SVID: + break; + case TYPE_SNK_IDENTITY: + break; + case TYPE_GET_DP_ALT_ENTER: + /* DP alt mode enter success */ + if (buf[0]) + anx7411_update_altmode(ctx, DP_SVID); + break; + case TYPE_DP_ALT_ENTER: + /* Update DP altmode */ + anx7411_update_altmode(ctx, DP_SVID); + break; + case TYPE_OBJ_REQ: + anx7411_detect_power_mode(ctx); + break; + case TYPE_DP_CONFIGURE: + anx7411_set_mux(ctx, buf[1]); + break; + case TYPE_DP_DISCOVER_MODES_INFO: + /* Make sure discover modes valid */ + if (buf[0] | buf[1]) + /* Register DP Altmode */ + anx7411_register_altmode(ctx, 1, buf); + break; + case TYPE_VDM: + /* Register other altmode */ + anx7411_register_altmode(ctx, 0, buf); + break; + default: + dev_err(dev, "ignore message(0x%.02x).\n", type); + break; + } + + return 0; +} + +static u8 checksum(struct device *dev, u8 *buf, u8 len) +{ + u8 ret = 0; + u8 i; + + for (i = 0; i < len; i++) + ret += buf[i]; + + return ret; +} + +static int anx7411_read_msg_ctrl_status(struct i2c_client *client) +{ + return anx7411_reg_read(client, CMD_SEND_BUF); +} + +static int anx7411_wait_msg_empty(struct i2c_client *client) +{ + int val; + + return readx_poll_timeout(anx7411_read_msg_ctrl_status, + client, val, (val < 0) || (val == 0), + 2000, 2000 * 150); +} + +static int anx7411_send_msg(struct anx7411_data *ctx, u8 type, u8 *buf, u8 size) +{ + struct device *dev = &ctx->spi_client->dev; + struct fw_msg *msg = &ctx->send_msg; + u8 crc; + int ret; + + size = min_t(u8, size, (u8)MAX_BUF_LEN); + memcpy(msg->buf, buf, size); + msg->msg_type = type; + /* msg len equals buffer length + msg_type */ + msg->msg_len = size + 1; + + /* Do CRC check for all buffer data and msg_len and msg_type */ + crc = checksum(dev, (u8 *)msg, size + HEADER_LEN); + msg->buf[size] = 0 - crc; + + ret = anx7411_wait_msg_empty(ctx->spi_client); + if (ret) + return ret; + + ret = anx7411_reg_block_write(ctx->spi_client, + CMD_SEND_BUF + 1, size + HEADER_LEN, + &msg->msg_type); + ret |= anx7411_reg_write(ctx->spi_client, CMD_SEND_BUF, + msg->msg_len); + return ret; +} + +static int anx7411_process_cmd(struct anx7411_data *ctx) +{ + struct device *dev = &ctx->spi_client->dev; + struct fw_msg *msg = &ctx->recv_msg; + u8 len; + u8 crc; + int ret; + + /* Read message from firmware */ + ret = anx7411_reg_block_read(ctx->spi_client, CMD_RECV_BUF, + MSG_LEN, (u8 *)msg); + if (ret < 0) + return 0; + + if (!msg->msg_len) + return 0; + + ret = anx7411_reg_write(ctx->spi_client, CMD_RECV_BUF, 0); + if (ret) + return ret; + + len = msg->msg_len & MSG_LEN_MASK; + crc = checksum(dev, (u8 *)msg, len + HEADER_LEN); + if (crc) { + dev_err(dev, "message error crc(0x%.02x)\n", crc); + return -ERANGE; + } + + return anx7411_parse_cmd(ctx, msg->msg_type, msg->buf, len - 1); +} + +static void anx7411_translate_payload(struct device *dev, __le32 *payload, + u32 *pdo, int nr, const char *type) +{ + int i; + + if (nr > PDO_MAX_OBJECTS) { + dev_err(dev, "nr(%d) exceed PDO_MAX_OBJECTS(%d)\n", + nr, PDO_MAX_OBJECTS); + + return; + } + + for (i = 0; i < nr; i++) + payload[i] = cpu_to_le32(pdo[i]); +} + +static int anx7411_config(struct anx7411_data *ctx) +{ + struct device *dev = &ctx->spi_client->dev; + struct typec_params *typecp = &ctx->typec; + __le32 payload[PDO_MAX_OBJECTS]; + int ret; + + /* Config PD FW work under PD 2.0 */ + ret = anx7411_reg_write(ctx->spi_client, PD_REV_INIT, PD_REV20); + ret |= anx7411_reg_write(ctx->tcpc_client, FW_CTRL_0, + UNSTRUCT_VDM_EN | DELAY_200MS | + VSAFE1 | FRS_EN); + ret |= anx7411_reg_write(ctx->spi_client, FW_CTRL_1, + AUTO_PD_EN | FORCE_SEND_RDO); + + /* Set VBUS current threshold */ + ret |= anx7411_reg_write(ctx->tcpc_client, VBUS_THRESHOLD_H, 0xff); + ret |= anx7411_reg_write(ctx->tcpc_client, VBUS_THRESHOLD_L, 0x03); + + /* Fix dongle compatible issue */ + ret |= anx7411_reg_write(ctx->tcpc_client, FW_PARAM, + anx7411_reg_read(ctx->tcpc_client, FW_PARAM) | + DONGLE_IOP); + ret |= anx7411_reg_write(ctx->spi_client, INT_MASK, 0); + + ret |= anx7411_reg_write(ctx->spi_client, PD_EXT_MSG_CTRL, 0xFF); + if (ret) + return ret; + + if (typecp->caps_flags & HAS_SOURCE_CAP) { + anx7411_translate_payload(dev, payload, typecp->src_pdo, + typecp->src_pdo_nr, "source"); + anx7411_send_msg(ctx, TYPE_SRC_CAP, (u8 *)&payload, + typecp->src_pdo_nr * 4); + anx7411_send_msg(ctx, TYPE_SNK_IDENTITY, snk_identity, + sizeof(snk_identity)); + anx7411_send_msg(ctx, TYPE_SET_SNK_DP_CAP, dp_caps, + sizeof(dp_caps)); + } + + if (typecp->caps_flags & HAS_SINK_CAP) { + anx7411_translate_payload(dev, payload, typecp->sink_pdo, + typecp->sink_pdo_nr, "sink"); + anx7411_send_msg(ctx, TYPE_SNK_CAP, (u8 *)&payload, + typecp->sink_pdo_nr * 4); + } + + if (typecp->caps_flags & HAS_SINK_WATT) { + if (typecp->sink_watt) { + ret |= anx7411_reg_write(ctx->spi_client, MAX_POWER, + typecp->sink_watt); + /* Set min power to 1W */ + ret |= anx7411_reg_write(ctx->spi_client, MIN_POWER, 2); + } + + if (typecp->sink_voltage) + ret |= anx7411_reg_write(ctx->spi_client, MAX_VOLTAGE, + typecp->sink_voltage); + if (ret) + return ret; + } + + if (!typecp->caps_flags) + usleep_range(5000, 6000); + + ctx->fw_version = anx7411_reg_read(ctx->spi_client, FW_VER); + ctx->fw_subversion = anx7411_reg_read(ctx->spi_client, FW_SUBVER); + + return 0; +} + +static void anx7411_chip_standby(struct anx7411_data *ctx) +{ + int ret; + u8 cc1, cc2; + struct device *dev = &ctx->spi_client->dev; + + ret = anx7411_reg_write(ctx->spi_client, OCM_CTRL_0, + anx7411_reg_read(ctx->spi_client, OCM_CTRL_0) | + OCM_RESET); + ret |= anx7411_reg_write(ctx->tcpc_client, ANALOG_CTRL_10, 0x80); + /* Set TCPC to RD and DRP enable */ + cc1 = TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC1_SHIFT; + cc2 = TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC2_SHIFT; + ret |= anx7411_reg_write(ctx->tcpc_client, TCPC_ROLE_CTRL, + TCPC_ROLE_CTRL_DRP | cc1 | cc2); + + /* Send DRP toggle command */ + ret |= anx7411_reg_write(ctx->tcpc_client, TCPC_COMMAND, + TCPC_CMD_LOOK4CONNECTION); + + /* Send TCPC enter standby command */ + ret |= anx7411_reg_write(ctx->tcpc_client, + TCPC_COMMAND, TCPC_CMD_I2C_IDLE); + if (ret) + dev_err(dev, "Chip standby failed\n"); +} + +static void anx7411_work_func(struct work_struct *work) +{ + int ret; + u8 buf[STATUS_LEN]; + u8 int_change; /* Interrupt change */ + u8 int_status; /* Firmware status update */ + u8 alert0, alert1; /* Interrupt alert source */ + struct anx7411_data *ctx = container_of(work, struct anx7411_data, work); + struct device *dev = &ctx->spi_client->dev; + + mutex_lock(&ctx->lock); + + /* Read interrupt change status */ + ret = anx7411_reg_block_read(ctx->spi_client, INT_STS, STATUS_LEN, buf); + if (ret < 0) { + /* Power standby mode, just return */ + goto unlock; + } + int_change = buf[0]; + int_status = buf[1]; + + /* Read alert register */ + ret = anx7411_reg_block_read(ctx->tcpc_client, ALERT_0, STATUS_LEN, buf); + if (ret < 0) + goto unlock; + + alert0 = buf[0]; + alert1 = buf[1]; + + /* Clear interrupt and alert status */ + ret = anx7411_reg_write(ctx->spi_client, INT_STS, 0); + ret |= anx7411_reg_write(ctx->tcpc_client, ALERT_0, alert0); + ret |= anx7411_reg_write(ctx->tcpc_client, ALERT_1, alert1); + if (ret) + goto unlock; + + if (alert1 & INTP_POW_OFF) { + anx7411_partner_unregister_altmode(ctx); + if (anx7411_set_usb_role(ctx, USB_ROLE_NONE)) + dev_err(dev, "Set usb role\n"); + anx7411_unregister_partner(ctx); + ctx->psy_online = ANX7411_PSY_OFFLINE; + ctx->usb_type = POWER_SUPPLY_USB_TYPE_C; + ctx->typec.request_voltage = 0; + ctx->typec.request_current = 0; + power_supply_changed(ctx->psy); + anx7411_chip_standby(ctx); + goto unlock; + } + + if ((alert0 & SOFTWARE_INT) && (int_change & OCM_BOOT_UP)) { + if (anx7411_config(ctx)) + dev_err(dev, "Config failed\n"); + if (anx7411_data_role_detect(ctx)) + dev_err(dev, "set PD data role\n"); + if (anx7411_power_role_detect(ctx)) + dev_err(dev, "set PD power role\n"); + anx7411_set_mux(ctx, SELECT_PIN_ASSIGMENT_C); + } + + if (alert0 & RECEIVED_MSG) + anx7411_process_cmd(ctx); + + ret = (int_status & DATA_ROLE) ? TYPEC_HOST : TYPEC_DEVICE; + if (ctx->typec.data_role != ret) + if (anx7411_data_role_detect(ctx)) + dev_err(dev, "set PD data role\n"); + + ret = (int_status & SINK_STATUS) ? TYPEC_SINK : TYPEC_SOURCE; + if (ctx->typec.power_role != ret) + if (anx7411_power_role_detect(ctx)) + dev_err(dev, "set PD power role\n"); + + if ((alert0 & SOFTWARE_INT) && (int_change & CC_STATUS_CHANGE)) + anx7411_cc_status_detect(ctx); + +unlock: + mutex_unlock(&ctx->lock); +} + +static irqreturn_t anx7411_intr_isr(int irq, void *data) +{ + struct anx7411_data *ctx = (struct anx7411_data *)data; + + queue_work(ctx->workqueue, &ctx->work); + + return IRQ_HANDLED; +} + +static int anx7411_register_i2c_dummy_clients(struct anx7411_data *ctx, + struct i2c_client *client) +{ + int i; + u8 spi_addr; + + for (i = 0; i < sizeof(anx7411_i2c_addr); i++) { + if (client->addr == (anx7411_i2c_addr[i].tcpc_address >> 1)) { + spi_addr = anx7411_i2c_addr[i].spi_address >> 1; + ctx->spi_client = i2c_new_dummy_device(client->adapter, + spi_addr); + if (ctx->spi_client) + return 0; + } + } + + dev_err(&client->dev, "unable to get SPI slave\n"); + return -ENOMEM; +} + +static void anx7411_port_unregister_altmodes(struct typec_altmode **adev) +{ + int i; + + for (i = 0; i < MAX_ALTMODE; i++) + if (adev[i]) { + typec_unregister_altmode(adev[i]); + adev[i] = NULL; + } +} + +static int anx7411_usb_mux_set(struct typec_mux_dev *mux, + struct typec_mux_state *state) +{ + struct anx7411_data *ctx = typec_mux_get_drvdata(mux); + struct device *dev = &ctx->spi_client->dev; + int has_dp; + + has_dp = (state->alt && state->alt->svid == USB_TYPEC_DP_SID && + state->alt->mode == USB_TYPEC_DP_MODE); + if (!has_dp) + dev_err(dev, "dp altmode not register\n"); + + return 0; +} + +static int anx7411_usb_set_orientation(struct typec_switch_dev *sw, + enum typec_orientation orientation) +{ + /* No need set */ + + return 0; +} + +static int anx7411_register_switch(struct anx7411_data *ctx, + struct device *dev, + struct fwnode_handle *fwnode) +{ + struct typec_switch_desc sw_desc = { }; + + sw_desc.fwnode = fwnode; + sw_desc.drvdata = ctx; + sw_desc.name = fwnode_get_name(fwnode); + sw_desc.set = anx7411_usb_set_orientation; + + ctx->typec.typec_switch = typec_switch_register(dev, &sw_desc); + if (IS_ERR(ctx->typec.typec_switch)) { + dev_err(dev, "switch register failed\n"); + return PTR_ERR(ctx->typec.typec_switch); + } + + return 0; +} + +static int anx7411_register_mux(struct anx7411_data *ctx, + struct device *dev, + struct fwnode_handle *fwnode) +{ + struct typec_mux_desc mux_desc = { }; + + mux_desc.fwnode = fwnode; + mux_desc.drvdata = ctx; + mux_desc.name = fwnode_get_name(fwnode); + mux_desc.set = anx7411_usb_mux_set; + + ctx->typec.typec_mux = typec_mux_register(dev, &mux_desc); + if (IS_ERR(ctx->typec.typec_mux)) { + dev_err(dev, "mux register failed\n"); + return PTR_ERR(ctx->typec.typec_mux); + } + + return 0; +} + +static void anx7411_unregister_mux(struct anx7411_data *ctx) +{ + if (ctx->typec.typec_mux) { + typec_mux_unregister(ctx->typec.typec_mux); + ctx->typec.typec_mux = NULL; + } +} + +static void anx7411_unregister_switch(struct anx7411_data *ctx) +{ + if (ctx->typec.typec_switch) { + typec_switch_unregister(ctx->typec.typec_switch); + ctx->typec.typec_switch = NULL; + } +} + +static int anx7411_typec_switch_probe(struct anx7411_data *ctx, + struct device *dev) +{ + int ret; + struct device_node *node; + + node = of_find_node_by_name(dev->of_node, "orientation_switch"); + if (!node) + return 0; + + ret = anx7411_register_switch(ctx, dev, &node->fwnode); + if (ret) { + dev_err(dev, "failed register switch"); + return ret; + } + + node = of_find_node_by_name(dev->of_node, "mode_switch"); + if (!node) { + dev_err(dev, "no typec mux exist"); + ret = -ENODEV; + goto unregister_switch; + } + + ret = anx7411_register_mux(ctx, dev, &node->fwnode); + if (ret) { + dev_err(dev, "failed register mode switch"); + ret = -ENODEV; + goto unregister_switch; + } + + return 0; + +unregister_switch: + anx7411_unregister_switch(ctx); + + return ret; +} + +static int anx7411_typec_port_probe(struct anx7411_data *ctx, + struct device *dev) +{ + struct typec_capability *cap = &ctx->typec.caps; + struct typec_params *typecp = &ctx->typec; + struct fwnode_handle *fwnode; + const char *buf; + int ret, i; + + fwnode = device_get_named_child_node(dev, "connector"); + if (!fwnode) + return -EINVAL; + + ret = fwnode_property_read_string(fwnode, "power-role", &buf); + if (ret) { + dev_err(dev, "power-role not found: %d\n", ret); + return ret; + } + + ret = typec_find_port_power_role(buf); + if (ret < 0) + return ret; + cap->type = ret; + + ret = fwnode_property_read_string(fwnode, "data-role", &buf); + if (ret) { + dev_err(dev, "data-role not found: %d\n", ret); + return ret; + } + + ret = typec_find_port_data_role(buf); + if (ret < 0) + return ret; + cap->data = ret; + + ret = fwnode_property_read_string(fwnode, "try-power-role", &buf); + if (ret) { + dev_err(dev, "try-power-role not found: %d\n", ret); + return ret; + } + + ret = typec_find_power_role(buf); + if (ret < 0) + return ret; + cap->prefer_role = ret; + + /* Get source pdos */ + ret = fwnode_property_count_u32(fwnode, "source-pdos"); + if (ret > 0) { + typecp->src_pdo_nr = min_t(u8, ret, PDO_MAX_OBJECTS); + ret = fwnode_property_read_u32_array(fwnode, "source-pdos", + typecp->src_pdo, + typecp->src_pdo_nr); + if (ret < 0) { + dev_err(dev, "source cap validate failed: %d\n", ret); + return -EINVAL; + } + + typecp->caps_flags |= HAS_SOURCE_CAP; + } + + ret = fwnode_property_count_u32(fwnode, "sink-pdos"); + if (ret > 0) { + typecp->sink_pdo_nr = min_t(u8, ret, PDO_MAX_OBJECTS); + ret = fwnode_property_read_u32_array(fwnode, "sink-pdos", + typecp->sink_pdo, + typecp->sink_pdo_nr); + if (ret < 0) { + dev_err(dev, "sink cap validate failed: %d\n", ret); + return -EINVAL; + } + + for (i = 0; i < typecp->sink_pdo_nr; i++) { + ret = 0; + switch (pdo_type(typecp->sink_pdo[i])) { + case PDO_TYPE_FIXED: + ret = pdo_fixed_voltage(typecp->sink_pdo[i]); + break; + case PDO_TYPE_BATT: + case PDO_TYPE_VAR: + ret = pdo_max_voltage(typecp->sink_pdo[i]); + break; + case PDO_TYPE_APDO: + default: + ret = 0; + break; + } + + /* 100mv per unit */ + typecp->sink_voltage = max(5000, ret) / 100; + } + + typecp->caps_flags |= HAS_SINK_CAP; + } + + if (!fwnode_property_read_u32(fwnode, "op-sink-microwatt", &ret)) { + typecp->sink_watt = ret / 500000; /* 500mw per unit */ + typecp->caps_flags |= HAS_SINK_WATT; + } + + cap->fwnode = fwnode; + + ctx->typec.role_sw = usb_role_switch_get(dev); + if (IS_ERR(ctx->typec.role_sw)) { + dev_err(dev, "USB role switch not found.\n"); + ctx->typec.role_sw = NULL; + } + + ctx->typec.port = typec_register_port(dev, cap); + if (IS_ERR(ctx->typec.port)) { + ret = PTR_ERR(ctx->typec.port); + ctx->typec.port = NULL; + dev_err(dev, "Failed to register type c port %d\n", ret); + return ret; + } + + typec_port_register_altmodes(ctx->typec.port, NULL, ctx, + ctx->typec.port_amode, + MAX_ALTMODE); + return 0; +} + +static int anx7411_typec_check_connection(struct anx7411_data *ctx) +{ + int ret; + + ret = anx7411_reg_read(ctx->spi_client, FW_VER); + if (ret < 0) + return 0; /* No device attached in typec port */ + + /* Clear interrupt and alert status */ + ret = anx7411_reg_write(ctx->spi_client, INT_STS, 0); + ret |= anx7411_reg_write(ctx->tcpc_client, ALERT_0, 0xFF); + ret |= anx7411_reg_write(ctx->tcpc_client, ALERT_1, 0xFF); + if (ret) + return ret; + + ret = anx7411_cc_status_detect(ctx); + ret |= anx7411_power_role_detect(ctx); + ret |= anx7411_data_role_detect(ctx); + ret |= anx7411_set_mux(ctx, SELECT_PIN_ASSIGMENT_C); + if (ret) + return ret; + + ret = anx7411_send_msg(ctx, TYPE_GET_DP_ALT_ENTER, NULL, 0); + ret |= anx7411_send_msg(ctx, TYPE_GET_DP_DISCOVER_MODES_INFO, NULL, 0); + + return ret; +} + +static int __maybe_unused anx7411_runtime_pm_suspend(struct device *dev) +{ + struct anx7411_data *ctx = dev_get_drvdata(dev); + + mutex_lock(&ctx->lock); + + anx7411_partner_unregister_altmode(ctx); + + if (ctx->typec.partner) + anx7411_unregister_partner(ctx); + + mutex_unlock(&ctx->lock); + + return 0; +} + +static int __maybe_unused anx7411_runtime_pm_resume(struct device *dev) +{ + struct anx7411_data *ctx = dev_get_drvdata(dev); + + mutex_lock(&ctx->lock); + /* Detect PD connection */ + if (anx7411_typec_check_connection(ctx)) + dev_err(dev, "check connection"); + + mutex_unlock(&ctx->lock); + + return 0; +} + +static const struct dev_pm_ops anx7411_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + SET_RUNTIME_PM_OPS(anx7411_runtime_pm_suspend, + anx7411_runtime_pm_resume, NULL) +}; + +static void anx7411_get_gpio_irq(struct anx7411_data *ctx) +{ + struct device *dev = &ctx->tcpc_client->dev; + + ctx->intp_gpiod = devm_gpiod_get_optional(dev, "interrupt", GPIOD_IN); + if (!ctx->intp_gpiod) { + dev_err(dev, "no interrupt gpio property\n"); + return; + } + + ctx->intp_irq = gpiod_to_irq(ctx->intp_gpiod); + if (!ctx->intp_irq) + dev_err(dev, "failed to get GPIO IRQ\n"); +} + +static enum power_supply_usb_type anx7411_psy_usb_types[] = { + POWER_SUPPLY_USB_TYPE_C, + POWER_SUPPLY_USB_TYPE_PD, + POWER_SUPPLY_USB_TYPE_PD_PPS, +}; + +static enum power_supply_property anx7411_psy_props[] = { + POWER_SUPPLY_PROP_USB_TYPE, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_MIN, + POWER_SUPPLY_PROP_VOLTAGE_MAX, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_MAX, + POWER_SUPPLY_PROP_CURRENT_NOW, +}; + +static int anx7411_psy_set_prop(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct anx7411_data *ctx = power_supply_get_drvdata(psy); + int ret = 0; + + if (psp == POWER_SUPPLY_PROP_ONLINE) + ctx->psy_online = val->intval; + else + ret = -EINVAL; + + power_supply_changed(ctx->psy); + return ret; +} + +static int anx7411_psy_prop_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + return psp == POWER_SUPPLY_PROP_ONLINE; +} + +static int anx7411_psy_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct anx7411_data *ctx = power_supply_get_drvdata(psy); + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_USB_TYPE: + val->intval = ctx->usb_type; + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = ctx->psy_online; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + case POWER_SUPPLY_PROP_VOLTAGE_MIN: + case POWER_SUPPLY_PROP_VOLTAGE_MAX: + val->intval = (ctx->psy_online) ? + ctx->typec.request_voltage * 1000 : 0; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + case POWER_SUPPLY_PROP_CURRENT_MAX: + val->intval = (ctx->psy_online) ? + ctx->typec.request_current * 1000 : 0; + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static int anx7411_psy_register(struct anx7411_data *ctx) +{ + struct power_supply_desc *psy_desc = &ctx->psy_desc; + struct power_supply_config psy_cfg = {}; + char *psy_name; + + psy_name = devm_kasprintf(ctx->dev, GFP_KERNEL, "anx7411-source-psy-%s", + dev_name(ctx->dev)); + if (!psy_name) + return -ENOMEM; + + psy_desc->name = psy_name; + psy_desc->type = POWER_SUPPLY_TYPE_USB; + psy_desc->usb_types = anx7411_psy_usb_types; + psy_desc->num_usb_types = ARRAY_SIZE(anx7411_psy_usb_types); + psy_desc->properties = anx7411_psy_props, + psy_desc->num_properties = ARRAY_SIZE(anx7411_psy_props), + + psy_desc->get_property = anx7411_psy_get_prop, + psy_desc->set_property = anx7411_psy_set_prop, + psy_desc->property_is_writeable = anx7411_psy_prop_writeable, + + ctx->usb_type = POWER_SUPPLY_USB_TYPE_C; + ctx->psy = devm_power_supply_register(ctx->dev, psy_desc, &psy_cfg); + + if (IS_ERR(ctx->psy)) + dev_warn(ctx->dev, "unable to register psy\n"); + + return PTR_ERR_OR_ZERO(ctx->psy); +} + +static int anx7411_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct anx7411_data *plat; + struct device *dev = &client->dev; + int ret; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) + return -ENODEV; + + plat = devm_kzalloc(dev, sizeof(*plat), GFP_KERNEL); + if (!plat) + return -ENOMEM; + + plat->tcpc_client = client; + i2c_set_clientdata(client, plat); + + mutex_init(&plat->lock); + + ret = anx7411_register_i2c_dummy_clients(plat, client); + if (ret) { + dev_err(dev, "fail to reserve I2C bus\n"); + return ret; + } + + ret = anx7411_typec_switch_probe(plat, dev); + if (ret) { + dev_err(dev, "fail to probe typec switch\n"); + goto free_i2c_dummy; + } + + ret = anx7411_typec_port_probe(plat, dev); + if (ret) { + dev_err(dev, "fail to probe typec property.\n"); + ret = -ENODEV; + goto free_typec_switch; + } + + plat->intp_irq = client->irq; + if (!client->irq) + anx7411_get_gpio_irq(plat); + + if (!plat->intp_irq) { + dev_err(dev, "fail to get interrupt IRQ\n"); + goto free_typec_port; + } + + plat->dev = dev; + plat->psy_online = ANX7411_PSY_OFFLINE; + if (anx7411_psy_register(plat)) { + dev_err(dev, "register psy\n"); + goto free_typec_port; + } + + INIT_WORK(&plat->work, anx7411_work_func); + plat->workqueue = alloc_workqueue("anx7411_work", + WQ_FREEZABLE | + WQ_MEM_RECLAIM, + 1); + if (!plat->workqueue) { + dev_err(dev, "fail to create work queue\n"); + ret = -ENOMEM; + goto free_typec_port; + } + + ret = devm_request_threaded_irq(dev, plat->intp_irq, + NULL, anx7411_intr_isr, + IRQF_TRIGGER_FALLING | + IRQF_ONESHOT, + "anx7411-intp", plat); + if (ret) { + dev_err(dev, "fail to request irq\n"); + goto free_wq; + } + + if (anx7411_typec_check_connection(plat)) + dev_err(dev, "check status\n"); + + pm_runtime_enable(dev); + + return 0; + +free_wq: + destroy_workqueue(plat->workqueue); + +free_typec_port: + typec_unregister_port(plat->typec.port); + anx7411_port_unregister_altmodes(plat->typec.port_amode); + +free_typec_switch: + anx7411_unregister_switch(plat); + anx7411_unregister_mux(plat); + +free_i2c_dummy: + i2c_unregister_device(plat->spi_client); + + return ret; +} + +static int anx7411_i2c_remove(struct i2c_client *client) +{ + struct anx7411_data *plat = i2c_get_clientdata(client); + + anx7411_partner_unregister_altmode(plat); + anx7411_unregister_partner(plat); + + if (plat->workqueue) + destroy_workqueue(plat->workqueue); + + if (plat->spi_client) + i2c_unregister_device(plat->spi_client); + + if (plat->typec.role_sw) + usb_role_switch_put(plat->typec.role_sw); + + anx7411_unregister_mux(plat); + + anx7411_unregister_switch(plat); + + if (plat->typec.port) + typec_unregister_port(plat->typec.port); + + anx7411_port_unregister_altmodes(plat->typec.port_amode); + + return 0; +} + +static const struct i2c_device_id anx7411_id[] = { + {"anx7411", 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, anx7411_id); + +static const struct of_device_id anx_match_table[] = { + {.compatible = "analogix,anx7411",}, + {}, +}; + +static struct i2c_driver anx7411_driver = { + .driver = { + .name = "anx7411", + .of_match_table = anx_match_table, + .pm = &anx7411_pm_ops, + }, + .probe = anx7411_i2c_probe, + .remove = anx7411_i2c_remove, + + .id_table = anx7411_id, +}; + +module_i2c_driver(anx7411_driver); + +MODULE_DESCRIPTION("Anx7411 USB Type-C PD driver"); +MODULE_AUTHOR("Xin Ji "); +MODULE_LICENSE("GPL"); +MODULE_VERSION("0.1.5");