From patchwork Sat Sep 17 21:06:06 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bitterblue Smith X-Patchwork-Id: 607126 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 8CB3DC6FA82 for ; Sat, 17 Sep 2022 21:06:16 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229492AbiIQVGP (ORCPT ); Sat, 17 Sep 2022 17:06:15 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56826 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229501AbiIQVGO (ORCPT ); Sat, 17 Sep 2022 17:06:14 -0400 Received: from mail-ed1-x52d.google.com (mail-ed1-x52d.google.com [IPv6:2a00:1450:4864:20::52d]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 467AF2B182 for ; Sat, 17 Sep 2022 14:06:10 -0700 (PDT) Received: by mail-ed1-x52d.google.com with SMTP id f20so31649302edf.6 for ; Sat, 17 Sep 2022 14:06:10 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=content-transfer-encoding:subject:from:cc:to:content-language :user-agent:mime-version:date:message-id:from:to:cc:subject:date; bh=o2Z5nIrL3WGLKY0T2Hv03PBcxGFq2tgMALlf5vlbhgw=; b=E/fqrTOWDORs2IuIBm6qdfxseIVf/65BQre5ANcSVf8P7vilam/AjMFcaNaFzPAqNY h5ovuPHkEnSSoAn4dtnOET0P37ZuB5cda12lc2Kbx7zuX+9e3HxYM5Gp90KVlzvQj7Hs 5xw/zcgPwFEFPu5BAYeA+gt87/ak9PxuwplBYwXQSWSM+saaahKlPfiWbHYYw6QG6jN+ eMfkWqQwDA05fAGDbAVmhLFPa8Atl7fjYjW+OAyzuQNX7ts0vyr9A4kBnsDZW+jqxbDj aCB/vTJHetYcifU3+8PajWkgBc7oc6zGospEM5ncIR2o/T2/Ws145X+JGCsUf4WeTRET Ftiw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:subject:from:cc:to:content-language :user-agent:mime-version:date:message-id:x-gm-message-state:from:to :cc:subject:date; bh=o2Z5nIrL3WGLKY0T2Hv03PBcxGFq2tgMALlf5vlbhgw=; b=N77yesqfiHoJNIRBm4SenlRw4Rb3U9C4L4HtlKYyjCHiXhj9Rt+Nx7Am/HFe7oc/CP 5qwCSRVQCFqBeFtJ6bzrdSkk/G/cZZ+n1ERQRhr6r9LwmJKSjCtn/yEYi3wf9C+ZFFVS zQEmVrRRfk2YTf4ajGI9WJxGKlVMxiYOocJr8aW71IcoF560GVwqi8pd4gIZmcS3SN+2 nXfSoSAk1nCDTU5SlzFwa0A1YdRaCHLPKp7L6c1Y7qoH6TGh2andenb/wtmtHr8pqXYD uGA+uzaxl0WJbsHm+3EU9Jvkz99XEE5vD0yIarovev7EPifZRARd/SKqzzcHY4PqawR+ oCww== X-Gm-Message-State: ACrzQf1fXpP8qvuG4c0bClFdFiQp3TAyJ1B6p3XeGZJbHwpXVXbIP6DQ Xr7H7osOzPIBqitm96IkN8QpKzwyFCs= X-Google-Smtp-Source: AMsMyM7D8q/SIaMtPGF8xh/EWfZkqSftL0z7z9l8/Z8QpcymYhUBc47Ie4NKF3RwMcxqeUn8WTL7ZA== X-Received: by 2002:a05:6402:11d0:b0:44e:ec42:e0b8 with SMTP id j16-20020a05640211d000b0044eec42e0b8mr9024852edw.131.1663448768283; Sat, 17 Sep 2022 14:06:08 -0700 (PDT) Received: from [192.168.1.50] ([81.196.40.23]) by smtp.gmail.com with ESMTPSA id fi24-20020a1709073ad800b0072af4af2f46sm12533319ejc.74.2022.09.17.14.06.07 (version=TLS1_3 cipher=TLS_AES_128_GCM_SHA256 bits=128/128); Sat, 17 Sep 2022 14:06:07 -0700 (PDT) Message-ID: Date: Sun, 18 Sep 2022 00:06:06 +0300 MIME-Version: 1.0 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101 Thunderbird/91.12.0 Content-Language: en-US To: linux-wireless@vger.kernel.org Cc: Jes Sorensen , chris.chiu@canonical.com From: Bitterblue Smith Subject: [PATCH v2] wifi: rtl8xxxu: Support new chip RTL8188FU Precedence: bulk List-ID: X-Mailing-List: linux-wireless@vger.kernel.org This chip is found in the cheapest USB adapters, e.g. 1.17 USD with VAT and shipping from China included. It's a gen 2 chip, similar to the RTL8723BU, but without Bluetooth. Features: 2.4 GHz, b/g/n mode, 1T1R, 150 Mbps. The vendor driver rtl8188fu version 4.3.23.6_20964.20170110 [0] was used as reference. The CD shipped with the device includes a newer driver, version 5.11.5-1-g12f7cde4b.20201102, but that one couldn't complete the WPA2 key exchange thing for whatever reason. [0] https://github.com/kelebek333/rtl8188fu Signed-off-by: Bitterblue Smith --- v2: - Make some functions static, remove an unused variable. Reported-by: kernel test robot - Remove "The speed is not great yet, but it's usable." from the commit message. Other patches will improve the speed. --- .../net/wireless/realtek/rtl8xxxu/Makefile | 2 +- .../net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 56 + .../realtek/rtl8xxxu/rtl8xxxu_8188f.c | 1696 +++++++++++++++++ .../realtek/rtl8xxxu/rtl8xxxu_8192c.c | 1 + .../realtek/rtl8xxxu/rtl8xxxu_8192e.c | 1 + .../realtek/rtl8xxxu/rtl8xxxu_8723a.c | 1 + .../realtek/rtl8xxxu/rtl8xxxu_8723b.c | 3 +- .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 137 +- .../wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | 19 + 9 files changed, 1891 insertions(+), 25 deletions(-) create mode 100644 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c diff --git a/drivers/net/wireless/realtek/rtl8xxxu/Makefile b/drivers/net/wireless/realtek/rtl8xxxu/Makefile index b278f8697cc0..c4ad5325f5e7 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/Makefile +++ b/drivers/net/wireless/realtek/rtl8xxxu/Makefile @@ -2,4 +2,4 @@ obj-$(CONFIG_RTL8XXXU) += rtl8xxxu.o rtl8xxxu-y := rtl8xxxu_core.o rtl8xxxu_8192e.o rtl8xxxu_8723b.o \ - rtl8xxxu_8723a.o rtl8xxxu_8192c.o + rtl8xxxu_8723a.o rtl8xxxu_8192c.o rtl8xxxu_8188f.o diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h index 7ddce3c3f0c4..501900c07fac 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h @@ -35,6 +35,7 @@ #define REALTEK_USB_CMD_IDX 0x00 #define TX_TOTAL_PAGE_NUM 0xf8 +#define TX_TOTAL_PAGE_NUM_8188F 0xf7 #define TX_TOTAL_PAGE_NUM_8192E 0xf3 #define TX_TOTAL_PAGE_NUM_8723B 0xf7 /* (HPQ + LPQ + NPQ + PUBQ) = TX_TOTAL_PAGE_NUM */ @@ -43,6 +44,11 @@ #define TX_PAGE_NUM_LO_PQ 0x02 #define TX_PAGE_NUM_NORM_PQ 0x02 +#define TX_PAGE_NUM_PUBQ_8188F 0xe5 +#define TX_PAGE_NUM_HI_PQ_8188F 0x0c +#define TX_PAGE_NUM_LO_PQ_8188F 0x02 +#define TX_PAGE_NUM_NORM_PQ_8188F 0x02 + #define TX_PAGE_NUM_PUBQ_8192E 0xe7 #define TX_PAGE_NUM_HI_PQ_8192E 0x08 #define TX_PAGE_NUM_LO_PQ_8192E 0x0c @@ -859,6 +865,50 @@ struct rtl8192eu_efuse { u8 res12[0xc3]; }; +struct rtl8188fu_efuse_tx_power { + u8 cck_base[6]; + u8 ht40_base[5]; + /* a: ofdm; b: ht20 */ + struct rtl8723au_idx ht20_ofdm_1s_diff; +}; + +struct rtl8188fu_efuse { + __le16 rtl_id; + u8 res0[0x0e]; + struct rtl8188fu_efuse_tx_power tx_power_index_A; /* 0x10 */ + u8 res1[0x9c]; /* 0x1c */ + u8 channel_plan; /* 0xb8 */ + u8 xtal_k; + u8 thermal_meter; + u8 iqk_lck; + u8 res2[5]; + u8 rf_board_option; + u8 rf_feature_option; + u8 rf_bt_setting; + u8 eeprom_version; + u8 eeprom_customer_id; + u8 res3[2]; + u8 kfree_thermal_k_on; + u8 rf_antenna_option; /* 0xc9 */ + u8 rfe_option; + u8 country_code; + u8 res4[4]; + u8 vid; /* 0xd0 */ + u8 res5[1]; + u8 pid; /* 0xd2 */ + u8 res6[1]; + u8 usb_optional_function; + u8 res7[2]; + u8 mac_addr[ETH_ALEN]; /* 0xd7 */ + u8 res8[2]; + u8 vendor_name[7]; + u8 res9[2]; + u8 device_name[7]; /* 0xe8 */ + u8 res10[0x41]; + u8 unknown[0x0d]; /* 0x130 */ + u8 res11[0xc3]; +}; + struct rtl8xxxu_reg8val { u16 reg; u8 val; @@ -1368,6 +1418,7 @@ struct rtl8xxxu_priv { struct rtl8723bu_efuse efuse8723bu; struct rtl8192cu_efuse efuse8192; struct rtl8192eu_efuse efuse8192eu; + struct rtl8188fu_efuse efuse8188fu; } efuse_wifi; u32 adda_backup[RTL8XXXU_ADDA_REGS]; u32 mac_backup[RTL8XXXU_MAC_REGS]; @@ -1414,6 +1465,7 @@ struct rtl8xxxu_fileops { void (*init_phy_bb) (struct rtl8xxxu_priv *priv); int (*init_phy_rf) (struct rtl8xxxu_priv *priv); void (*phy_init_antenna_selection) (struct rtl8xxxu_priv *priv); + void (*phy_lc_calibrate) (struct rtl8xxxu_priv *priv); void (*phy_iq_calibrate) (struct rtl8xxxu_priv *priv); void (*config_channel) (struct ieee80211_hw *hw); int (*parse_rx_desc) (struct rtl8xxxu_priv *priv, struct sk_buff *skb); @@ -1493,9 +1545,11 @@ int rtl8xxxu_init_phy_regs(struct rtl8xxxu_priv *priv, int rtl8xxxu_load_firmware(struct rtl8xxxu_priv *priv, char *fw_name); void rtl8xxxu_firmware_self_reset(struct rtl8xxxu_priv *priv); void rtl8xxxu_power_off(struct rtl8xxxu_priv *priv); +int rtl8xxxu_read_efuse8(struct rtl8xxxu_priv *priv, u16 offset, u8 *data); void rtl8xxxu_reset_8051(struct rtl8xxxu_priv *priv); int rtl8xxxu_auto_llt_table(struct rtl8xxxu_priv *priv); void rtl8xxxu_gen2_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start); +void rtl8723a_phy_lc_calibrate(struct rtl8xxxu_priv *priv); int rtl8xxxu_flush_fifo(struct rtl8xxxu_priv *priv); int rtl8xxxu_gen2_h2c_cmd(struct rtl8xxxu_priv *priv, struct h2c_cmd *h2c, int len); @@ -1539,7 +1593,9 @@ void rtl8xxxu_fill_txdesc_v2(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr, u32 rts_rate); void rtl8723bu_set_ps_tdma(struct rtl8xxxu_priv *priv, u8 arg1, u8 arg2, u8 arg3, u8 arg4, u8 arg5); +void rtl8723bu_phy_init_antenna_selection(struct rtl8xxxu_priv *priv); +extern struct rtl8xxxu_fileops rtl8188fu_fops; extern struct rtl8xxxu_fileops rtl8192cu_fops; extern struct rtl8xxxu_fileops rtl8192eu_fops; extern struct rtl8xxxu_fileops rtl8723au_fops; diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c new file mode 100644 index 000000000000..5f7f9ea4d1d5 --- /dev/null +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188f.c @@ -0,0 +1,1696 @@ +/* + * RTL8XXXU mac80211 USB driver - 8188f specific subdriver + * + * Copyright (c) 2022 Bitterblue Smith + * + * Portions copied from existing rtl8xxxu code: + * Copyright (c) 2014 - 2017 Jes Sorensen + * + * Portions, notably calibration code: + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "rtl8xxxu.h" +#include "rtl8xxxu_regs.h" + +static struct rtl8xxxu_reg8val rtl8188f_mac_init_table[] = { + {0x024, 0xDF}, {0x025, 0x07}, {0x02B, 0x1C}, {0x283, 0x20}, + {0x421, 0x0F}, {0x428, 0x0A}, {0x429, 0x10}, {0x430, 0x00}, + {0x431, 0x00}, {0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04}, + {0x435, 0x05}, {0x436, 0x07}, {0x437, 0x08}, {0x43C, 0x04}, + {0x43D, 0x05}, {0x43E, 0x07}, {0x43F, 0x08}, {0x440, 0x5D}, + {0x441, 0x01}, {0x442, 0x00}, {0x444, 0x10}, {0x445, 0x00}, + {0x446, 0x00}, {0x447, 0x00}, {0x448, 0x00}, {0x449, 0xF0}, + {0x44A, 0x0F}, {0x44B, 0x3E}, {0x44C, 0x10}, {0x44D, 0x00}, + {0x44E, 0x00}, {0x44F, 0x00}, {0x450, 0x00}, {0x451, 0xF0}, + {0x452, 0x0F}, {0x453, 0x00}, {0x456, 0x5E}, {0x460, 0x44}, + {0x461, 0x44}, {0x4BC, 0xC0}, {0x4C8, 0xFF}, {0x4C9, 0x08}, + {0x4CC, 0xFF}, {0x4CD, 0xFF}, {0x4CE, 0x01}, {0x500, 0x26}, + {0x501, 0xA2}, {0x502, 0x2F}, {0x503, 0x00}, {0x504, 0x28}, + {0x505, 0xA3}, {0x506, 0x5E}, {0x507, 0x00}, {0x508, 0x2B}, + {0x509, 0xA4}, {0x50A, 0x5E}, {0x50B, 0x00}, {0x50C, 0x4F}, + {0x50D, 0xA4}, {0x50E, 0x00}, {0x50F, 0x00}, {0x512, 0x1C}, + {0x514, 0x0A}, {0x516, 0x0A}, {0x525, 0x4F}, {0x550, 0x10}, + {0x551, 0x10}, {0x559, 0x02}, {0x55C, 0x28}, {0x55D, 0xFF}, + {0x605, 0x30}, {0x608, 0x0E}, {0x609, 0x2A}, {0x620, 0xFF}, + {0x621, 0xFF}, {0x622, 0xFF}, {0x623, 0xFF}, {0x624, 0xFF}, + {0x625, 0xFF}, {0x626, 0xFF}, {0x627, 0xFF}, {0x638, 0x28}, + {0x63C, 0x0A}, {0x63D, 0x0A}, {0x63E, 0x0E}, {0x63F, 0x0E}, + {0x640, 0x40}, {0x642, 0x40}, {0x643, 0x00}, {0x652, 0xC8}, + {0x66E, 0x05}, {0x700, 0x21}, {0x701, 0x43}, {0x702, 0x65}, + {0x703, 0x87}, {0x708, 0x21}, {0x709, 0x43}, {0x70A, 0x65}, + {0x70B, 0x87}, + {0xffff, 0xff}, +}; + +static struct rtl8xxxu_reg32val rtl8188fu_phy_init_table[] = { + {0x800, 0x80045700}, {0x804, 0x00000001}, + {0x808, 0x0000FC00}, {0x80C, 0x0000000A}, + {0x810, 0x10001331}, {0x814, 0x020C3D10}, + {0x818, 0x00200385}, {0x81C, 0x00000000}, + {0x820, 0x01000100}, {0x824, 0x00390204}, + {0x828, 0x00000000}, {0x82C, 0x00000000}, + {0x830, 0x00000000}, {0x834, 0x00000000}, + {0x838, 0x00000000}, {0x83C, 0x00000000}, + {0x840, 0x00010000}, {0x844, 0x00000000}, + {0x848, 0x00000000}, {0x84C, 0x00000000}, + {0x850, 0x00030000}, {0x854, 0x00000000}, + {0x858, 0x569A569A}, {0x85C, 0x569A569A}, + {0x860, 0x00000130}, {0x864, 0x00000000}, + {0x868, 0x00000000}, {0x86C, 0x27272700}, + {0x870, 0x00000000}, {0x874, 0x25004000}, + {0x878, 0x00000808}, {0x87C, 0x004F0201}, + {0x880, 0xB0000B1E}, {0x884, 0x00000007}, + {0x888, 0x00000000}, {0x88C, 0xCCC000C0}, + {0x890, 0x00000800}, {0x894, 0xFFFFFFFE}, + {0x898, 0x40302010}, {0x89C, 0x00706050}, + {0x900, 0x00000000}, {0x904, 0x00000023}, + {0x908, 0x00000000}, {0x90C, 0x81121111}, + {0x910, 0x00000002}, {0x914, 0x00000201}, + {0x948, 0x99000000}, {0x94C, 0x00000010}, + {0x950, 0x20003000}, {0x954, 0x4A880000}, + {0x958, 0x4BC5D87A}, {0x95C, 0x04EB9B79}, + {0x96C, 0x00000003}, {0xA00, 0x00D047C8}, + {0xA04, 0x80FF800C}, {0xA08, 0x8C898300}, + {0xA0C, 0x2E7F120F}, {0xA10, 0x9500BB78}, + {0xA14, 0x1114D028}, {0xA18, 0x00881117}, + {0xA1C, 0x89140F00}, {0xA20, 0xD1D80000}, + {0xA24, 0x5A7DA0BD}, {0xA28, 0x0000223B}, + {0xA2C, 0x00D30000}, {0xA70, 0x101FBF00}, + {0xA74, 0x00000007}, {0xA78, 0x00000900}, + {0xA7C, 0x225B0606}, {0xA80, 0x218075B1}, + {0xA84, 0x00120000}, {0xA88, 0x040C0000}, + {0xA8C, 0x12345678}, {0xA90, 0xABCDEF00}, + {0xA94, 0x001B1B89}, {0xA98, 0x05100000}, + {0xA9C, 0x3F000000}, {0xAA0, 0x00000000}, + {0xB2C, 0x00000000}, {0xC00, 0x48071D40}, + {0xC04, 0x03A05611}, {0xC08, 0x000000E4}, + {0xC0C, 0x6C6C6C6C}, {0xC10, 0x18800000}, + {0xC14, 0x40000100}, {0xC18, 0x08800000}, + {0xC1C, 0x40000100}, {0xC20, 0x00000000}, + {0xC24, 0x00000000}, {0xC28, 0x00000000}, + {0xC2C, 0x00000000}, {0xC30, 0x69E9CC4A}, + {0xC34, 0x31000040}, {0xC38, 0x21688080}, + {0xC3C, 0x00001714}, {0xC40, 0x1F78403F}, + {0xC44, 0x00010036}, {0xC48, 0xEC020107}, + {0xC4C, 0x007F037F}, {0xC50, 0x69553420}, + {0xC54, 0x43BC0094}, {0xC58, 0x00013169}, + {0xC5C, 0x00250492}, {0xC60, 0x00000000}, + {0xC64, 0x7112848B}, {0xC68, 0x47C07BFF}, + {0xC6C, 0x00000036}, {0xC70, 0x2C7F000D}, + {0xC74, 0x020600DB}, {0xC78, 0x0000001F}, + {0xC7C, 0x00B91612}, {0xC80, 0x390000E4}, + {0xC84, 0x11F60000}, + {0xC88, 0x40000100}, {0xC8C, 0x20200000}, + {0xC90, 0x00091521}, {0xC94, 0x00000000}, + {0xC98, 0x00121820}, {0xC9C, 0x00007F7F}, + {0xCA0, 0x00000000}, {0xCA4, 0x000300A0}, + {0xCA8, 0x00000000}, {0xCAC, 0x00000000}, + {0xCB0, 0x00000000}, {0xCB4, 0x00000000}, + {0xCB8, 0x00000000}, {0xCBC, 0x28000000}, + {0xCC0, 0x00000000}, {0xCC4, 0x00000000}, + {0xCC8, 0x00000000}, {0xCCC, 0x00000000}, + {0xCD0, 0x00000000}, {0xCD4, 0x00000000}, + {0xCD8, 0x64B22427}, {0xCDC, 0x00766932}, + {0xCE0, 0x00222222}, {0xCE4, 0x10000000}, + {0xCE8, 0x37644302}, {0xCEC, 0x2F97D40C}, + {0xD00, 0x04030740}, {0xD04, 0x40020401}, + {0xD08, 0x0000907F}, {0xD0C, 0x20010201}, + {0xD10, 0xA0633333}, {0xD14, 0x3333BC53}, + {0xD18, 0x7A8F5B6F}, {0xD2C, 0xCB979975}, + {0xD30, 0x00000000}, {0xD34, 0x80608000}, + {0xD38, 0x98000000}, {0xD3C, 0x40127353}, + {0xD40, 0x00000000}, {0xD44, 0x00000000}, + {0xD48, 0x00000000}, {0xD4C, 0x00000000}, + {0xD50, 0x6437140A}, {0xD54, 0x00000000}, + {0xD58, 0x00000282}, {0xD5C, 0x30032064}, + {0xD60, 0x4653DE68}, {0xD64, 0x04518A3C}, + {0xD68, 0x00002101}, {0xD6C, 0x2A201C16}, + {0xD70, 0x1812362E}, {0xD74, 0x322C2220}, + {0xD78, 0x000E3C24}, {0xE00, 0x2D2D2D2D}, + {0xE04, 0x2D2D2D2D}, {0xE08, 0x0390272D}, + {0xE10, 0x2D2D2D2D}, {0xE14, 0x2D2D2D2D}, + {0xE18, 0x2D2D2D2D}, {0xE1C, 0x2D2D2D2D}, + {0xE28, 0x00000000}, {0xE30, 0x1000DC1F}, + {0xE34, 0x10008C1F}, {0xE38, 0x02140102}, + {0xE3C, 0x681604C2}, {0xE40, 0x01007C00}, + {0xE44, 0x01004800}, {0xE48, 0xFB000000}, + {0xE4C, 0x000028D1}, {0xE50, 0x1000DC1F}, + {0xE54, 0x10008C1F}, {0xE58, 0x02140102}, + {0xE5C, 0x28160D05}, {0xE60, 0x00000008}, + {0xE60, 0x021400A0}, {0xE64, 0x281600A0}, + {0xE6C, 0x01C00010}, {0xE70, 0x01C00010}, + {0xE74, 0x02000010}, {0xE78, 0x02000010}, + {0xE7C, 0x02000010}, {0xE80, 0x02000010}, + {0xE84, 0x01C00010}, {0xE88, 0x02000010}, + {0xE8C, 0x01C00010}, {0xED0, 0x01C00010}, + {0xED4, 0x01C00010}, {0xED8, 0x01C00010}, + {0xEDC, 0x00000010}, {0xEE0, 0x00000010}, + {0xEEC, 0x03C00010}, {0xF14, 0x00000003}, + {0xF4C, 0x00000000}, {0xF00, 0x00000300}, + {0xffff, 0xffffffff}, +}; + +static struct rtl8xxxu_reg32val rtl8188f_agc_table[] = { + {0xC78, 0xFC000001}, {0xC78, 0xFB010001}, + {0xC78, 0xFA020001}, {0xC78, 0xF9030001}, + {0xC78, 0xF8040001}, {0xC78, 0xF7050001}, + {0xC78, 0xF6060001}, {0xC78, 0xF5070001}, + {0xC78, 0xF4080001}, {0xC78, 0xF3090001}, + {0xC78, 0xF20A0001}, {0xC78, 0xF10B0001}, + {0xC78, 0xF00C0001}, {0xC78, 0xEF0D0001}, + {0xC78, 0xEE0E0001}, {0xC78, 0xED0F0001}, + {0xC78, 0xEC100001}, {0xC78, 0xEB110001}, + {0xC78, 0xEA120001}, {0xC78, 0xE9130001}, + {0xC78, 0xE8140001}, {0xC78, 0xE7150001}, + {0xC78, 0xE6160001}, {0xC78, 0xE5170001}, + {0xC78, 0xE4180001}, {0xC78, 0xE3190001}, + {0xC78, 0xE21A0001}, {0xC78, 0xE11B0001}, + {0xC78, 0xE01C0001}, {0xC78, 0xC21D0001}, + {0xC78, 0xC11E0001}, {0xC78, 0xC01F0001}, + {0xC78, 0xA5200001}, {0xC78, 0xA4210001}, + {0xC78, 0xA3220001}, {0xC78, 0xA2230001}, + {0xC78, 0xA1240001}, {0xC78, 0xA0250001}, + {0xC78, 0x65260001}, {0xC78, 0x64270001}, + {0xC78, 0x63280001}, {0xC78, 0x62290001}, + {0xC78, 0x612A0001}, {0xC78, 0x442B0001}, + {0xC78, 0x432C0001}, {0xC78, 0x422D0001}, + {0xC78, 0x412E0001}, {0xC78, 0x402F0001}, + {0xC78, 0x21300001}, {0xC78, 0x20310001}, + {0xC78, 0x05320001}, {0xC78, 0x04330001}, + {0xC78, 0x03340001}, {0xC78, 0x02350001}, + {0xC78, 0x01360001}, {0xC78, 0x00370001}, + {0xC78, 0x00380001}, {0xC78, 0x00390001}, + {0xC78, 0x003A0001}, {0xC78, 0x003B0001}, + {0xC78, 0x003C0001}, {0xC78, 0x003D0001}, + {0xC78, 0x003E0001}, {0xC78, 0x003F0001}, + {0xC50, 0x69553422}, {0xC50, 0x69553420}, + {0xffff, 0xffffffff} +}; + +static struct rtl8xxxu_rfregval rtl8188fu_radioa_init_table[] = { + {0x00, 0x00030000}, {0x08, 0x00008400}, + {0x18, 0x00000407}, {0x19, 0x00000012}, + {0x1B, 0x00001C6C}, + {0x1E, 0x00080009}, {0x1F, 0x00000880}, + {0x2F, 0x0001A060}, {0x3F, 0x00028000}, + {0x42, 0x000060C0}, {0x57, 0x000D0000}, + {0x58, 0x000C0160}, {0x67, 0x00001552}, + {0x83, 0x00000000}, {0xB0, 0x000FF9F0}, + {0xB1, 0x00022218}, {0xB2, 0x00034C00}, + {0xB4, 0x0004484B}, {0xB5, 0x0000112A}, + {0xB6, 0x0000053E}, {0xB7, 0x00010408}, + {0xB8, 0x00010200}, {0xB9, 0x00080001}, + {0xBA, 0x00040001}, {0xBB, 0x00000400}, + {0xBF, 0x000C0000}, {0xC2, 0x00002400}, + {0xC3, 0x00000009}, {0xC4, 0x00040C91}, + {0xC5, 0x00099999}, {0xC6, 0x000000A3}, + {0xC7, 0x0008F820}, {0xC8, 0x00076C06}, + {0xC9, 0x00000000}, {0xCA, 0x00080000}, + {0xDF, 0x00000180}, {0xEF, 0x000001A0}, + {0x51, 0x000E8333}, {0x52, 0x000FAC2C}, + {0x53, 0x00000103}, {0x56, 0x000517F0}, + {0x35, 0x00000099}, {0x35, 0x00000199}, + {0x35, 0x00000299}, {0x36, 0x00000064}, + {0x36, 0x00008064}, {0x36, 0x00010064}, + {0x36, 0x00018064}, {0x18, 0x00000C07}, + {0x5A, 0x00048000}, {0x19, 0x000739D0}, + {0x34, 0x0000ADD6}, {0x34, 0x00009DD3}, + {0x34, 0x00008CF4}, {0x34, 0x00007CF1}, + {0x34, 0x00006CEE}, {0x34, 0x00005CEB}, + {0x34, 0x00004CCE}, {0x34, 0x00003CCB}, + {0x34, 0x00002CC8}, {0x34, 0x00001C4B}, + {0x34, 0x00000C48}, + {0x00, 0x00030159}, {0x84, 0x00048000}, + {0x86, 0x0000002A}, {0x87, 0x00000025}, + {0x8E, 0x00065540}, {0x8F, 0x00088000}, + {0xEF, 0x000020A0}, {0x3B, 0x000F0F00}, + {0x3B, 0x000E0B00}, {0x3B, 0x000D0900}, + {0x3B, 0x000C0700}, {0x3B, 0x000B0600}, + {0x3B, 0x000A0400}, {0x3B, 0x00090200}, + {0x3B, 0x00080000}, {0x3B, 0x0007BF00}, + {0x3B, 0x00060B00}, {0x3B, 0x0005C900}, + {0x3B, 0x00040700}, {0x3B, 0x00030600}, + {0x3B, 0x0002D500}, {0x3B, 0x00010200}, + {0x3B, 0x0000E000}, {0xEF, 0x000000A0}, + {0xEF, 0x00000010}, {0x3B, 0x0000C0A8}, + {0x3B, 0x00010400}, {0xEF, 0x00000000}, + {0xEF, 0x00080000}, {0x30, 0x00010000}, + {0x31, 0x0000000F}, {0x32, 0x00007EFE}, + {0xEF, 0x00000000}, {0x00, 0x00010159}, + {0x18, 0x0000FC07}, {0xFE, 0x00000000}, + {0xFE, 0x00000000}, {0x1F, 0x00080003}, + {0xFE, 0x00000000}, {0xFE, 0x00000000}, + {0x1E, 0x00000001}, {0x1F, 0x00080000}, + {0x00, 0x00033D95}, + {0xff, 0xffffffff} +}; + +static struct rtl8xxxu_rfregval rtl8188fu_cut_b_radioa_init_table[] = { + {0x00, 0x00030000}, {0x08, 0x00008400}, + {0x18, 0x00000407}, {0x19, 0x00000012}, + {0x1B, 0x00001C6C}, + {0x1E, 0x00080009}, {0x1F, 0x00000880}, + {0x2F, 0x0001A060}, {0x3F, 0x00028000}, + {0x42, 0x000060C0}, {0x57, 0x000D0000}, + {0x58, 0x000C0160}, {0x67, 0x00001552}, + {0x83, 0x00000000}, {0xB0, 0x000FF9F0}, + {0xB1, 0x00022218}, {0xB2, 0x00034C00}, + {0xB4, 0x0004484B}, {0xB5, 0x0000112A}, + {0xB6, 0x0000053E}, {0xB7, 0x00010408}, + {0xB8, 0x00010200}, {0xB9, 0x00080001}, + {0xBA, 0x00040001}, {0xBB, 0x00000400}, + {0xBF, 0x000C0000}, {0xC2, 0x00002400}, + {0xC3, 0x00000009}, {0xC4, 0x00040C91}, + {0xC5, 0x00099999}, {0xC6, 0x000000A3}, + {0xC7, 0x0008F820}, {0xC8, 0x00076C06}, + {0xC9, 0x00000000}, {0xCA, 0x00080000}, + {0xDF, 0x00000180}, {0xEF, 0x000001A0}, + {0x51, 0x000E8231}, {0x52, 0x000FAC2C}, + {0x53, 0x00000141}, {0x56, 0x000517F0}, + {0x35, 0x00000090}, {0x35, 0x00000190}, + {0x35, 0x00000290}, {0x36, 0x00001064}, + {0x36, 0x00009064}, {0x36, 0x00011064}, + {0x36, 0x00019064}, {0x18, 0x00000C07}, + {0x5A, 0x00048000}, {0x19, 0x000739D0}, + {0x34, 0x0000ADD2}, {0x34, 0x00009DD0}, + {0x34, 0x00008CF3}, {0x34, 0x00007CF0}, + {0x34, 0x00006CED}, {0x34, 0x00005CD2}, + {0x34, 0x00004CCF}, {0x34, 0x00003CCC}, + {0x34, 0x00002CC9}, {0x34, 0x00001C4C}, + {0x34, 0x00000C49}, + {0x00, 0x00030159}, {0x84, 0x00048000}, + {0x86, 0x0000002A}, {0x87, 0x00000025}, + {0x8E, 0x00065540}, {0x8F, 0x00088000}, + {0xEF, 0x000020A0}, {0x3B, 0x000F0F00}, + {0x3B, 0x000E0B00}, {0x3B, 0x000D0900}, + {0x3B, 0x000C0700}, {0x3B, 0x000B0600}, + {0x3B, 0x000A0400}, {0x3B, 0x00090200}, + {0x3B, 0x00080000}, {0x3B, 0x0007BF00}, + {0x3B, 0x00060B00}, {0x3B, 0x0005C900}, + {0x3B, 0x00040700}, {0x3B, 0x00030600}, + {0x3B, 0x0002D500}, {0x3B, 0x00010200}, + {0x3B, 0x0000E000}, {0xEF, 0x000000A0}, + {0xEF, 0x00000010}, {0x3B, 0x0000C0A8}, + {0x3B, 0x00010400}, {0xEF, 0x00000000}, + {0xEF, 0x00080000}, {0x30, 0x00010000}, + {0x31, 0x0000000F}, {0x32, 0x00007EFE}, + {0xEF, 0x00000000}, {0x00, 0x00010159}, + {0x18, 0x0000FC07}, {0xFE, 0x00000000}, + {0xFE, 0x00000000}, {0x1F, 0x00080003}, + {0xFE, 0x00000000}, {0xFE, 0x00000000}, + {0x1E, 0x00000001}, {0x1F, 0x00080000}, + {0x00, 0x00033D95}, + {0xff, 0xffffffff} +}; + +static void rtl8xxxu_8188f_channel_to_group(int channel, int *group, int *cck_group) +{ + if (channel < 3) + *group = 0; + else if (channel < 6) + *group = 1; + else if (channel < 9) + *group = 2; + else if (channel < 12) + *group = 3; + else + *group = 4; + + if (channel == 14) + *cck_group = 5; + else + *cck_group = *group; +} + +static void +rtl8188f_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40) +{ + u32 val32, ofdm, mcs; + u8 cck, ofdmbase, mcsbase; + int group, cck_group; + + rtl8xxxu_8188f_channel_to_group(channel, &group, &cck_group); + + cck = priv->cck_tx_power_index_A[cck_group]; + + val32 = rtl8xxxu_read32(priv, REG_TX_AGC_A_CCK1_MCS32); + val32 &= 0xffff00ff; + val32 |= (cck << 8); + rtl8xxxu_write32(priv, REG_TX_AGC_A_CCK1_MCS32, val32); + + val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11); + val32 &= 0xff; + val32 |= ((cck << 8) | (cck << 16) | (cck << 24)); + rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32); + + ofdmbase = priv->ht40_1s_tx_power_index_A[group]; + ofdmbase += priv->ofdm_tx_power_diff[0].a; + ofdm = ofdmbase | ofdmbase << 8 | ofdmbase << 16 | ofdmbase << 24; + + rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE18_06, ofdm); + rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE54_24, ofdm); + + mcsbase = priv->ht40_1s_tx_power_index_A[group]; + if (ht40) + /* This diff is always 0 - not used in 8188FU. */ + mcsbase += priv->ht40_tx_power_diff[0].a; + else + mcsbase += priv->ht20_tx_power_diff[0].a; + mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24; + + rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS03_MCS00, mcs); + rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS07_MCS04, mcs); + rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS11_MCS08, mcs); + rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS15_MCS12, mcs); +} + +/* A workaround to eliminate the 2400MHz, 2440MHz, 2480MHz spur of 8188F. */ +static void rtl8188f_spur_calibration(struct rtl8xxxu_priv *priv, u8 channel) +{ + const u32 frequencies[14 + 1] = { + [5] = 0xFCCD, + [6] = 0xFC4D, + [7] = 0xFFCD, + [8] = 0xFF4D, + [11] = 0xFDCD, + [13] = 0xFCCD, + [14] = 0xFF9A + }; + + const u32 reg_d40[14 + 1] = { + [5] = 0x06000000, + [6] = 0x00000600, + [13] = 0x06000000 + }; + + const u32 reg_d44[14 + 1] = { + [11] = 0x04000000 + }; + + const u32 reg_d4c[14 + 1] = { + [7] = 0x06000000, + [8] = 0x00000380, + [14] = 0x00180000 + }; + + const u8 threshold = 0x16; + bool do_notch, hw_ctrl, sw_ctrl, hw_ctrl_s1, sw_ctrl_s1; + u32 val32, initial_gain, reg948; + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_RX_D_SYNC_PATH); + val32 |= GENMASK(28, 24); + rtl8xxxu_write32(priv, REG_OFDM0_RX_D_SYNC_PATH, val32); + + /*enable notch filter */ + val32 = rtl8xxxu_read32(priv, REG_OFDM0_RX_D_SYNC_PATH); + val32 |= BIT(9); + rtl8xxxu_write32(priv, REG_OFDM0_RX_D_SYNC_PATH, val32); + + if (channel <= 14 && frequencies[channel] > 0) { + reg948 = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH); + hw_ctrl = reg948 & BIT(6); + sw_ctrl = !hw_ctrl; + + if (hw_ctrl) { + val32 = rtl8xxxu_read32(priv, REG_FPGA0_XB_RF_INT_OE); + val32 &= GENMASK(5, 3); + hw_ctrl_s1 = val32 == BIT(3); + } else if (sw_ctrl) { + sw_ctrl_s1 = !(reg948 & BIT(9)); + } + + if (hw_ctrl_s1 || sw_ctrl_s1) { + initial_gain = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1); + + /* Disable CCK block */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); + val32 &= ~FPGA_RF_MODE_CCK; + rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); + + val32 = initial_gain & ~OFDM0_X_AGC_CORE1_IGI_MASK; + val32 |= 0x30; + rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32); + + /* disable 3-wire */ + rtl8xxxu_write32(priv, REG_FPGA0_ANALOG4, 0xccf000c0); + + /* Setup PSD */ + rtl8xxxu_write32(priv, REG_FPGA0_PSD_FUNC, frequencies[channel]); + + /* Start PSD */ + rtl8xxxu_write32(priv, REG_FPGA0_PSD_FUNC, 0x400000 | frequencies[channel]); + + msleep(30); + + do_notch = rtl8xxxu_read32(priv, REG_FPGA0_PSD_REPORT) >= threshold; + + /* turn off PSD */ + rtl8xxxu_write32(priv, REG_FPGA0_PSD_FUNC, frequencies[channel]); + + /* enable 3-wire */ + rtl8xxxu_write32(priv, REG_FPGA0_ANALOG4, 0xccc000c0); + + /* Enable CCK block */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); + val32 |= FPGA_RF_MODE_CCK; + rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); + + rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, initial_gain); + + if (do_notch) { + rtl8xxxu_write32(priv, REG_OFDM1_CSI_FIX_MASK1, reg_d40[channel]); + rtl8xxxu_write32(priv, REG_OFDM1_CSI_FIX_MASK2, reg_d44[channel]); + rtl8xxxu_write32(priv, 0xd48, 0x0); + rtl8xxxu_write32(priv, 0xd4c, reg_d4c[channel]); + + /*enable CSI mask */ + val32 = rtl8xxxu_read32(priv, REG_OFDM1_CFO_TRACKING); + val32 |= BIT(28); + rtl8xxxu_write32(priv, REG_OFDM1_CFO_TRACKING, val32); + + return; + } + } + } + + /*disable CSI mask function */ + val32 = rtl8xxxu_read32(priv, REG_OFDM1_CFO_TRACKING); + val32 &= ~BIT(28); + rtl8xxxu_write32(priv, REG_OFDM1_CFO_TRACKING, val32); +} + +static void rtl8188fu_config_channel(struct ieee80211_hw *hw) +{ + struct rtl8xxxu_priv *priv = hw->priv; + u32 val32; + u8 channel, subchannel; + bool sec_ch_above; + + channel = (u8)hw->conf.chandef.chan->hw_value; + + /* Set channel*/ + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_MODE_AG); + val32 &= ~MODE_AG_CHANNEL_MASK; + val32 |= channel; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, val32); + + /* Spur calibration */ + rtl8188f_spur_calibration(priv, channel); + + /* Set bandwidth mode */ + if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_20 || + hw->conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT || + hw->conf.chandef.width == NL80211_CHAN_WIDTH_40) { + val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); + val32 &= ~FPGA_RF_MODE; + val32 |= hw->conf.chandef.width == NL80211_CHAN_WIDTH_40; + rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); + + val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE); + val32 &= ~FPGA_RF_MODE; + val32 |= hw->conf.chandef.width == NL80211_CHAN_WIDTH_40; + rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32); + + /* RXADC CLK */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); + val32 |= GENMASK(10, 8); + rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); + + /* TXDAC CLK */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE); + val32 |= BIT(14) | BIT(12); + val32 &= ~BIT(13); + rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); + + /* small BW */ + val32 = rtl8xxxu_read32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT); + val32 &= ~GENMASK(31, 30); + rtl8xxxu_write32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT, val32); + + /* adc buffer clk */ + val32 = rtl8xxxu_read32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT); + val32 &= ~BIT(29); + val32 |= BIT(28); + rtl8xxxu_write32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT, val32); + + /* adc buffer clk */ + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_RX_AFE); + val32 &= ~BIT(29); + val32 |= BIT(28); + rtl8xxxu_write32(priv, REG_OFDM0_XA_RX_AFE, val32); + + val32 = rtl8xxxu_read32(priv, REG_OFDM_RX_DFIR); + val32 &= ~BIT(19); + rtl8xxxu_write32(priv, REG_OFDM_RX_DFIR, val32); + + val32 = rtl8xxxu_read32(priv, REG_OFDM_RX_DFIR); + val32 &= ~GENMASK(23, 20); + val32 |= BIT(21); + if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_20 || + hw->conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT) + val32 |= BIT(20); + else if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40) + val32 |= BIT(22); + rtl8xxxu_write32(priv, REG_OFDM_RX_DFIR, val32); + + if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40) { + if (hw->conf.chandef.center_freq1 > + hw->conf.chandef.chan->center_freq) { + sec_ch_above = 1; + channel += 2; + } else { + sec_ch_above = 0; + channel -= 2; + } + + /* Set Control channel to upper or lower. */ + val32 = rtl8xxxu_read32(priv, REG_CCK0_SYSTEM); + val32 &= ~CCK0_SIDEBAND; + if (!sec_ch_above) + val32 |= CCK0_SIDEBAND; + rtl8xxxu_write32(priv, REG_CCK0_SYSTEM, val32); + + val32 = rtl8xxxu_read32(priv, REG_DATA_SUBCHANNEL); + /* + * It doesn't make sense to clear only bits 0-3, + * but this is what the vendor driver does. + */ + val32 &= ~GENMASK(3, 0); + if (sec_ch_above) + subchannel = (2 << 4) | 2; + else + subchannel = (1 << 4) | 1; + val32 |= subchannel; + rtl8xxxu_write32(priv, REG_DATA_SUBCHANNEL, val32); + + val32 = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET); + val32 &= ~RSR_RSC_BANDWIDTH_40M; + rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, val32); + } + + /* RF TRX_BW */ + val32 = channel; + if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_20 || + hw->conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT) + val32 |= MODE_AG_BW_20MHZ_8723B; + else if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40) + val32 |= MODE_AG_BW_40MHZ_8723B; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, val32); + + /* FILTER BW&RC Corner (ACPR) */ + if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_20 || + hw->conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT) + val32 = 0x00065; + else if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40) + val32 = 0x00025; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RXG_MIX_SWBW, val32); + + if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_20 || + hw->conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT) + val32 = 0x0; + else if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40) + val32 = 0x01000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RX_BB2, val32); + + /* RC Corner */ + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x00140); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RX_G2, 0x01c6c); + } +} + +static void rtl8188fu_init_aggregation(struct rtl8xxxu_priv *priv) +{ + u8 agg_ctrl, rxdma_mode, usb_tx_agg_desc_num = 6; + u32 agg_rx, val32; + + /* TX aggregation */ + val32 = rtl8xxxu_read32(priv, REG_DWBCN0_CTRL_8188F); + val32 &= ~(0xf << 4); + val32 |= usb_tx_agg_desc_num << 4; + rtl8xxxu_write32(priv, REG_DWBCN0_CTRL_8188F, val32); + rtl8xxxu_write8(priv, REG_DWBCN1_CTRL_8723B, usb_tx_agg_desc_num << 1); + + /* RX aggregation */ + agg_ctrl = rtl8xxxu_read8(priv, REG_TRXDMA_CTRL); + agg_ctrl &= ~TRXDMA_CTRL_RXDMA_AGG_EN; + + agg_rx = rtl8xxxu_read32(priv, REG_RXDMA_AGG_PG_TH); + agg_rx &= ~RXDMA_USB_AGG_ENABLE; + agg_rx &= ~0xFF0F; /* reset agg size and timeout */ + + rxdma_mode = rtl8xxxu_read8(priv, REG_RXDMA_PRO_8723B); + rxdma_mode &= ~BIT(1); + + rtl8xxxu_write8(priv, REG_TRXDMA_CTRL, agg_ctrl); + rtl8xxxu_write32(priv, REG_RXDMA_AGG_PG_TH, agg_rx); + rtl8xxxu_write8(priv, REG_RXDMA_PRO_8723B, rxdma_mode); +} + +static void rtl8188fu_init_statistics(struct rtl8xxxu_priv *priv) +{ + u32 val32; + + /* Time duration for NHM unit: 4us, 0xc350=200ms */ + rtl8xxxu_write16(priv, REG_NHM_TIMER_8723B + 2, 0xc350); + rtl8xxxu_write16(priv, REG_NHM_TH9_TH10_8723B + 2, 0xffff); + rtl8xxxu_write32(priv, REG_NHM_TH3_TO_TH0_8723B, 0xffffff50); + rtl8xxxu_write32(priv, REG_NHM_TH7_TO_TH4_8723B, 0xffffffff); + /* TH8 */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 |= 0xff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + /* Enable CCK */ + val32 = rtl8xxxu_read32(priv, REG_NHM_TH9_TH10_8723B); + val32 &= ~(BIT(8) | BIT(9) | BIT(10)); + val32 |= BIT(8); + rtl8xxxu_write32(priv, REG_NHM_TH9_TH10_8723B, val32); + /* Max power amongst all RX antennas */ + val32 = rtl8xxxu_read32(priv, REG_OFDM0_FA_RSTC); + val32 |= BIT(7); + rtl8xxxu_write32(priv, REG_OFDM0_FA_RSTC, val32); +} + +static int rtl8188fu_parse_efuse(struct rtl8xxxu_priv *priv) +{ + struct rtl8188fu_efuse *efuse = &priv->efuse_wifi.efuse8188fu; + int i; + + if (efuse->rtl_id != cpu_to_le16(0x8129)) + return -EINVAL; + + ether_addr_copy(priv->mac_addr, efuse->mac_addr); + + memcpy(priv->cck_tx_power_index_A, efuse->tx_power_index_A.cck_base, + sizeof(efuse->tx_power_index_A.cck_base)); + /* + * Efuse is empty for path B, so copy in values from path A + */ + memcpy(priv->cck_tx_power_index_B, efuse->tx_power_index_A.cck_base, + sizeof(efuse->tx_power_index_A.cck_base)); + + memcpy(priv->ht40_1s_tx_power_index_A, + efuse->tx_power_index_A.ht40_base, + sizeof(efuse->tx_power_index_A.ht40_base)); + memcpy(priv->ht40_1s_tx_power_index_B, + efuse->tx_power_index_A.ht40_base, + sizeof(efuse->tx_power_index_A.ht40_base)); + + priv->ofdm_tx_power_diff[0].a = efuse->tx_power_index_A.ht20_ofdm_1s_diff.a; + priv->ht20_tx_power_diff[0].a = efuse->tx_power_index_A.ht20_ofdm_1s_diff.b; + + priv->xtalk = efuse->xtal_k & 0x3f; + + dev_info(&priv->udev->dev, "Vendor: %.7s\n", efuse->vendor_name); + dev_info(&priv->udev->dev, "Product: %.7s\n", efuse->device_name); + + if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE) { + unsigned char *raw = priv->efuse_wifi.raw; + + dev_info(&priv->udev->dev, + "%s: dumping efuse (0x%02zx bytes):\n", + __func__, sizeof(struct rtl8188fu_efuse)); + for (i = 0; i < sizeof(struct rtl8188fu_efuse); i += 8) + dev_info(&priv->udev->dev, "%02x: %8ph\n", i, &raw[i]); + } + + return 0; +} + +static int rtl8188fu_load_firmware(struct rtl8xxxu_priv *priv) +{ + char *fw_name; + int ret; + + fw_name = "rtlwifi/rtl8188fufw.bin"; + + ret = rtl8xxxu_load_firmware(priv, fw_name); + + return ret; +} + +static void rtl8188fu_init_phy_bb(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 val16; + u32 val32; + + /* Enable BB and RF */ + val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); + val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB | SYS_FUNC_DIO_RF; + rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); + + /* + * Per vendor driver, run power sequence before init of RF + */ + val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB; + rtl8xxxu_write8(priv, REG_RF_CTRL, val8); + + usleep_range(10, 20); + + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_IQADJ_G1, 0x780); + + val8 = SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB | SYS_FUNC_USBA | SYS_FUNC_USBD; + rtl8xxxu_write8(priv, REG_SYS_FUNC, val8); + + rtl8xxxu_init_phy_regs(priv, rtl8188fu_phy_init_table); + rtl8xxxu_init_phy_regs(priv, rtl8188f_agc_table); + + val32 = rtl8xxxu_read32(priv, REG_AFE_XTAL_CTRL); + val8 = priv->xtalk; + val32 &= ~0x007FF800; + val32 |= ((val8 | (val8 << 6)) << 11); + rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, val32); +} + +static int rtl8188fu_init_phy_rf(struct rtl8xxxu_priv *priv) +{ + int ret; + + if (priv->chip_cut == 1) + ret = rtl8xxxu_init_phy_rf(priv, rtl8188fu_cut_b_radioa_init_table, RF_A); + else + ret = rtl8xxxu_init_phy_rf(priv, rtl8188fu_radioa_init_table, RF_A); + + return ret; +} + +static void rtl8188f_phy_lc_calibrate(struct rtl8xxxu_priv *priv) +{ + u32 val32; + u32 rf_amode, lstf; + int i; + + /* Check continuous TX and Packet TX */ + lstf = rtl8xxxu_read32(priv, REG_OFDM1_LSTF); + + if (lstf & OFDM_LSTF_MASK) { + /* Disable all continuous TX */ + val32 = lstf & ~OFDM_LSTF_MASK; + rtl8xxxu_write32(priv, REG_OFDM1_LSTF, val32); + } else { + /* Deal with Packet TX case */ + /* block all queues */ + rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff); + } + + /* Read original RF mode Path A */ + rf_amode = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_AC); + + /* Start LC calibration */ + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, rf_amode | 0x08000); + + for (i = 0; i < 100; i++) { + if ((rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_MODE_AG) & 0x08000) == 0) + break; + msleep(10); + } + + if (i == 100) + dev_warn(&priv->udev->dev, "LC calibration timed out.\n"); + + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, rf_amode); + + /* Restore original parameters */ + if (lstf & OFDM_LSTF_MASK) + rtl8xxxu_write32(priv, REG_OFDM1_LSTF, lstf); + else /* Deal with Packet TX case */ + rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00); +} + +static int rtl8188fu_iqk_path_a(struct rtl8xxxu_priv *priv, u32 *lok_result) +{ + u32 reg_eac, reg_e94, reg_e9c, val32; + int result = 0; + + /* + * Leave IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* + * Enable path A PA in TX IQK mode + */ + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); + val32 |= 0x80000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x20000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0x07ff7); + + /* PA,PAD gain adjust */ + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x980); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x5102a); + + /* enter IQK mode */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + val32 |= 0x80800000; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* path-A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x821403ff); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160000); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(25); + + /* + * Leave IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x180); + + /* save LOK result */ + *lok_result = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_TXM_IDAC); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); + reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); + + if (!(reg_eac & BIT(28)) && + ((reg_e94 & 0x03ff0000) != 0x01420000) && + ((reg_e9c & 0x03ff0000) != 0x00420000)) + result |= 0x01; + + return result; +} + +static int rtl8188fu_rx_iqk_path_a(struct rtl8xxxu_priv *priv, u32 lok_result) +{ + u32 reg_ea4, reg_eac, reg_e94, reg_e9c, val32; + int result = 0; + + /* + * Leave IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* + * Enable path A PA in TX IQK mode + */ + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); + val32 |= 0x80000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf1173); + + /* PA,PAD gain adjust */ + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x980); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x5102a); + + /* + * Enter IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + val32 |= 0x80800000; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* + * Tx IQK setting + */ + rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* path-A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x10008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x30008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160fff); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28160000); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(25); + + /* + * Leave IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x180); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); + reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); + + if (!(reg_eac & BIT(28)) && + ((reg_e94 & 0x03ff0000) != 0x01420000) && + ((reg_e9c & 0x03ff0000) != 0x00420000)) + result |= 0x01; + else /* If TX not OK, ignore RX */ + goto out; + + val32 = 0x80007c00 | (reg_e94 & 0x3ff0000) | + ((reg_e9c & 0x3ff0000) >> 16); + rtl8xxxu_write32(priv, REG_TX_IQK, val32); + + /* + * Modify RX IQK mode table + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); + val32 |= 0x80000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0000f); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7ff2); + + /* + * PA, PAD setting + */ + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x980); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_56, 0x51000); + + /* + * Enter IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + val32 |= 0x80800000; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + /* + * RX IQK setting + */ + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + /* path-A IQK setting */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x30008c1c); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x10008c1c); + + rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160000); + rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x281613ff); + + /* LO calibration setting */ + rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911); + + /* One shot, path A LOK & IQK */ + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); + rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); + + mdelay(25); + + /* + * Leave IQK mode + */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0x000000ff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x180); + + /* reload LOK value */ + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXM_IDAC, lok_result); + + /* Check failed */ + reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); + reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2); + + if (!(reg_eac & BIT(27)) && + ((reg_ea4 & 0x03ff0000) != 0x01320000) && + ((reg_eac & 0x03ff0000) != 0x00360000)) + result |= 0x02; + +out: + return result; +} + +static void rtl8188fu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, + int result[][8], int t) +{ + struct device *dev = &priv->udev->dev; + u32 i, val32, rx_initial_gain, lok_result; + u32 path_sel_bb, path_sel_rf; + int path_a_ok; + int retry = 2; + static const u32 adda_regs[RTL8XXXU_ADDA_REGS] = { + REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH, + REG_RX_WAIT_CCA, REG_TX_CCK_RFON, + REG_TX_CCK_BBON, REG_TX_OFDM_RFON, + REG_TX_OFDM_BBON, REG_TX_TO_RX, + REG_TX_TO_TX, REG_RX_CCK, + REG_RX_OFDM, REG_RX_WAIT_RIFS, + REG_RX_TO_RX, REG_STANDBY, + REG_SLEEP, REG_PMPD_ANAEN + }; + static const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = { + REG_TXPAUSE, REG_BEACON_CTRL, + REG_BEACON_CTRL_1, REG_GPIO_MUXCFG + }; + static const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = { + REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR, + REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B, + REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE, + REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE + }; + + /* + * Note: IQ calibration must be performed after loading + * PHY_REG.txt , and radio_a, radio_b.txt + */ + + rx_initial_gain = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1); + + if (t == 0) { + /* Save ADDA parameters, turn Path A ADDA on */ + rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup, + RTL8XXXU_ADDA_REGS); + rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup); + rtl8xxxu_save_regs(priv, iqk_bb_regs, + priv->bb_backup, RTL8XXXU_BB_REGS); + } + + rtl8xxxu_path_adda_on(priv, adda_regs, true); + + if (t == 0) { + val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_HSSI_PARM1); + if (val32 & FPGA0_HSSI_PARM1_PI) + priv->pi_enabled = 1; + } + + /* save RF path */ + path_sel_bb = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH); + path_sel_rf = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_S0S1); + + /* BB setting */ + rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600); + rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4); + rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x25204000); + + /* MAC settings */ + val32 = rtl8xxxu_read32(priv, REG_TX_PTCL_CTRL); + val32 |= 0x00ff0000; + rtl8xxxu_write32(priv, REG_TX_PTCL_CTRL, val32); + + /* IQ calibration setting */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0xff; + val32 |= 0x80800000; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); + rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); + + for (i = 0; i < retry; i++) { + path_a_ok = rtl8188fu_iqk_path_a(priv, &lok_result); + if (path_a_ok == 0x01) { + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0xff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + val32 = rtl8xxxu_read32(priv, + REG_TX_POWER_BEFORE_IQK_A); + result[t][0] = (val32 >> 16) & 0x3ff; + + val32 = rtl8xxxu_read32(priv, + REG_TX_POWER_AFTER_IQK_A); + result[t][1] = (val32 >> 16) & 0x3ff; + break; + } + } + + for (i = 0; i < retry; i++) { + path_a_ok = rtl8188fu_rx_iqk_path_a(priv, lok_result); + if (path_a_ok == 0x03) { + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_BEFORE_IQK_A_2); + result[t][2] = (val32 >> 16) & 0x3ff; + + val32 = rtl8xxxu_read32(priv, + REG_RX_POWER_AFTER_IQK_A_2); + result[t][3] = (val32 >> 16) & 0x3ff; + break; + } + } + + if (!path_a_ok) + dev_dbg(dev, "%s: Path A IQK failed!\n", __func__); + + /* Back to BB mode, load original value */ + val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); + val32 &= 0xff; + rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); + + if (t) { + if (!priv->pi_enabled) { + /* + * Switch back BB to SI mode after finishing + * IQ Calibration + */ + val32 = 0x01000000; + rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, val32); + rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM1, val32); + } + + /* Reload ADDA power saving parameters */ + rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup, + RTL8XXXU_ADDA_REGS); + + /* Reload MAC parameters */ + rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup); + + /* Reload BB parameters */ + rtl8xxxu_restore_regs(priv, iqk_bb_regs, + priv->bb_backup, RTL8XXXU_BB_REGS); + + /* Reload RF path */ + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel_bb); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_S0S1, path_sel_rf); + + /* Restore RX initial gain */ + val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1); + val32 &= 0xffffff00; + val32 |= 0x50; + rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32); + rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, rx_initial_gain & 0xff); + + /* Load 0xe30 IQC default value */ + rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00); + rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00); + } +} + +static void rtl8188fu_phy_iq_calibrate(struct rtl8xxxu_priv *priv) +{ + struct device *dev = &priv->udev->dev; + int result[4][8]; /* last is final result */ + int i, candidate; + bool path_a_ok; + u32 reg_e94, reg_e9c, reg_ea4, reg_eac; + u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc; + s32 reg_tmp = 0; + bool simu; + u32 path_sel_bb, path_sel_rf; + + /* Save RF path */ + path_sel_bb = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH); + path_sel_rf = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_S0S1); + + memset(result, 0, sizeof(result)); + candidate = -1; + + path_a_ok = false; + + for (i = 0; i < 3; i++) { + rtl8188fu_phy_iqcalibrate(priv, result, i); + + if (i == 1) { + simu = rtl8xxxu_gen2_simularity_compare(priv, result, 0, 1); + if (simu) { + candidate = 0; + break; + } + } + + if (i == 2) { + simu = rtl8xxxu_gen2_simularity_compare(priv, result, 0, 2); + if (simu) { + candidate = 0; + break; + } + + simu = rtl8xxxu_gen2_simularity_compare(priv, result, 1, 2); + if (simu) { + candidate = 1; + } else { + for (i = 0; i < 8; i++) + reg_tmp += result[3][i]; + + if (reg_tmp) + candidate = 3; + else + candidate = -1; + } + } + } + + for (i = 0; i < 4; i++) { + reg_e94 = result[i][0]; + reg_e9c = result[i][1]; + reg_ea4 = result[i][2]; + reg_eac = result[i][3]; + reg_eb4 = result[i][4]; + reg_ebc = result[i][5]; + reg_ec4 = result[i][6]; + reg_ecc = result[i][7]; + } + + if (candidate >= 0) { + reg_e94 = result[candidate][0]; + priv->rege94 = reg_e94; + reg_e9c = result[candidate][1]; + priv->rege9c = reg_e9c; + reg_ea4 = result[candidate][2]; + reg_eac = result[candidate][3]; + reg_eb4 = result[candidate][4]; + priv->regeb4 = reg_eb4; + reg_ebc = result[candidate][5]; + priv->regebc = reg_ebc; + reg_ec4 = result[candidate][6]; + reg_ecc = result[candidate][7]; + dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate); + dev_dbg(dev, + "%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x ecc=%x\n", + __func__, reg_e94, reg_e9c, + reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc); + path_a_ok = true; + } else { + reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100; + reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0; + } + + if (reg_e94 && candidate >= 0) + rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result, + candidate, (reg_ea4 == 0)); + + rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg, + priv->bb_recovery_backup, RTL8XXXU_BB_REGS); + + rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel_bb); + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_S0S1, path_sel_rf); +} + +static void rtl8188f_disabled_to_emu(struct rtl8xxxu_priv *priv) +{ + u16 val8; + + /*0x04[12:11] = 2b'01enable WL suspend*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~((APS_FSMCO_PCIE | APS_FSMCO_HW_SUSPEND) >> 8); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + /* 0xC4[4] <= 1, turn off USB APHY LDO under suspend mode*/ + val8 = rtl8xxxu_read8(priv, 0xc4); + val8 &= ~BIT(4); + rtl8xxxu_write8(priv, 0xc4, val8); +} + +static int rtl8188f_emu_to_active(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u32 val32; + int count, ret = 0; + + /* Disable SW LPS */ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~(APS_FSMCO_SW_LPS >> 8); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + /* wait till 0x04[17] = 1 power ready*/ + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + if (val32 & BIT(17)) + break; + + udelay(10); + } + + if (!count) { + ret = -EBUSY; + goto exit; + } + + /* Disable HWPDN */ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~(APS_FSMCO_HW_POWERDOWN >> 8); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + /* Disable WL suspend */ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~(APS_FSMCO_HW_SUSPEND >> 8); + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + /* set, then poll until 0 */ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 |= APS_FSMCO_MAC_ENABLE >> 8; + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) { + ret = 0; + break; + } + udelay(10); + } + + if (!count) { + ret = -EBUSY; + goto exit; + } + + /*0x27<=35 to reduce RF noise*/ + val8 = rtl8xxxu_write8(priv, 0x27, 0x35); +exit: + return ret; +} + +static int rtl8188fu_active_to_emu(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u32 val32; + int count, ret = 0; + + /* Turn off RF */ + rtl8xxxu_write8(priv, REG_RF_CTRL, 0); + + /*0x4C[23] = 0x4E[7] = 0, switch DPDT_SEL_P output from register 0x65[2] */ + val8 = rtl8xxxu_read8(priv, 0x4e); + val8 &= ~BIT(7); + rtl8xxxu_write8(priv, 0x4e, val8); + + /*0x27 <= 34, xtal_qsel = 0 to xtal bring up*/ + rtl8xxxu_write8(priv, 0x27, 0x34); + + /*0x04[9] = 1 turn off MAC by HW state machine*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 |= APS_FSMCO_MAC_OFF >> 8; + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { + val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); + if ((val32 & APS_FSMCO_MAC_OFF) == 0) { + ret = 0; + break; + } + udelay(10); + } + + if (!count) { + ret = -EBUSY; + goto exit; + } + +exit: + return ret; +} + +static int rtl8188fu_emu_to_disabled(struct rtl8xxxu_priv *priv) +{ + u8 val8; + + /*0x04[12:11] = 2b'01 enable WL suspend*/ + val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); + val8 &= ~((APS_FSMCO_PCIE | APS_FSMCO_HW_SUSPEND) >> 8); + val8 |= APS_FSMCO_HW_SUSPEND >> 8; + rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); + + /* 0xC4[4] <= 1, turn off USB APHY LDO under suspend mode*/ + val8 = rtl8xxxu_read8(priv, 0xc4); + val8 |= BIT(4); + rtl8xxxu_write8(priv, 0xc4, val8); + + return 0; +} + +static int rtl8188fu_active_to_lps(struct rtl8xxxu_priv *priv) +{ + struct device *dev = &priv->udev->dev; + u8 val8; + u16 val16; + u32 val32; + int retry, retval; + + /*set RPWM IMR*/ + val8 = rtl8xxxu_read8(priv, REG_FTIMR + 1); + val8 |= IMR0_CPWM >> 8; + rtl8xxxu_write8(priv, REG_FTIMR + 1, val8); + + /*Tx Pause*/ + rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff); + + retry = 100; + retval = -EBUSY; + /* + * Poll 32 bit wide REG_SCH_TX_CMD for 0x00000000 to ensure no TX is pending. + */ + do { + val32 = rtl8xxxu_read32(priv, REG_SCH_TX_CMD); + if (!val32) { + retval = 0; + break; + } + } while (retry--); + + if (!retry) { + dev_warn(dev, "Failed to flush TX queue\n"); + retval = -EBUSY; + goto out; + } + + /* Disable CCK and OFDM, clock gated */ + val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC); + val8 &= ~SYS_FUNC_BBRSTB; + rtl8xxxu_write8(priv, REG_SYS_FUNC, val8); + + udelay(2); + + /*Whole BB is reset*/ + val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC); + val8 &= ~SYS_FUNC_BB_GLB_RSTN; + rtl8xxxu_write8(priv, REG_SYS_FUNC, val8); + + /* Reset MAC TRX */ + val16 = rtl8xxxu_read16(priv, REG_CR); + val16 |= 0x3f; + val16 &= ~(CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | CR_SECURITY_ENABLE); + rtl8xxxu_write16(priv, REG_CR, val16); + + /*Respond TxOK to scheduler*/ + val8 = rtl8xxxu_read8(priv, REG_DUAL_TSF_RST); + val8 |= DUAL_TSF_TX_OK; + rtl8xxxu_write8(priv, REG_DUAL_TSF_RST, val8); + +out: + return retval; +} + +static int rtl8188fu_power_on(struct rtl8xxxu_priv *priv) +{ + u16 val16; + int ret; + + rtl8188f_disabled_to_emu(priv); + + ret = rtl8188f_emu_to_active(priv); + if (ret) + goto exit; + + rtl8xxxu_write8(priv, REG_CR, 0); + + val16 = rtl8xxxu_read16(priv, REG_CR); + + val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE | + CR_TXDMA_ENABLE | CR_RXDMA_ENABLE | + CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE | + CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE); + rtl8xxxu_write16(priv, REG_CR, val16); + +exit: + return ret; +} + +static void rtl8188fu_power_off(struct rtl8xxxu_priv *priv) +{ + u8 val8; + u16 val16; + + rtl8xxxu_flush_fifo(priv); + + val16 = rtl8xxxu_read16(priv, REG_GPIO_MUXCFG); + val16 &= ~BIT(12); + rtl8xxxu_write16(priv, REG_GPIO_MUXCFG, val16); + + rtl8xxxu_write32(priv, REG_HISR0, 0xFFFFFFFF); + rtl8xxxu_write32(priv, REG_HISR1, 0xFFFFFFFF); + + /*Stop Tx Report Timer. 0x4EC[Bit1]=b'0 */ + val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL); + val8 &= ~TX_REPORT_CTRL_TIMER_ENABLE; + rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8); + + /* Turn off RF */ + rtl8xxxu_write8(priv, REG_RF_CTRL, 0x00); + + /* Reset Firmware if running in RAM */ + if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL) + rtl8xxxu_firmware_self_reset(priv); + + rtl8188fu_active_to_lps(priv); + + /* Reset MCU */ + val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); + val16 &= ~SYS_FUNC_CPU_ENABLE; + rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); + + /* Reset MCU ready status */ + rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00); + + rtl8188fu_active_to_emu(priv); + rtl8188fu_emu_to_disabled(priv); +} + +static void rtl8188f_enable_rf(struct rtl8xxxu_priv *priv) +{ +#define PPG_BB_GAIN_2G_TXA_OFFSET_8188F 0xee +#define PPG_BB_GAIN_2G_TX_OFFSET_MASK 0x0f + + u32 val32; + u8 pg_pwrtrim = 0xff, val8; + s8 bb_gain; + + /* Somehow this is not found in the efuse we read earlier. */ + rtl8xxxu_read_efuse8(priv, PPG_BB_GAIN_2G_TXA_OFFSET_8188F, &pg_pwrtrim); + + if (pg_pwrtrim != 0xff) { + bb_gain = pg_pwrtrim & PPG_BB_GAIN_2G_TX_OFFSET_MASK; + + if (bb_gain == PPG_BB_GAIN_2G_TX_OFFSET_MASK) + bb_gain = 0; + else if (bb_gain & 1) + bb_gain = bb_gain >> 1; + else + bb_gain = -(bb_gain >> 1); + + val8 = abs(bb_gain); + if (bb_gain > 0) + val8 |= BIT(5); + + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_55); + val32 &= ~0xfc000; + val32 |= val8 << 14; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_55, val32); + } + + rtl8xxxu_write8(priv, REG_RF_CTRL, RF_ENABLE | RF_RSTB | RF_SDMRSTB); + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE); + val32 &= ~(OFDM_RF_PATH_RX_MASK | OFDM_RF_PATH_TX_MASK); + val32 |= OFDM_RF_PATH_RX_A | OFDM_RF_PATH_TX_A; + rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32); + + rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00); +} + +static void rtl8188f_disable_rf(struct rtl8xxxu_priv *priv) +{ + u32 val32; + + val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE); + val32 &= ~OFDM_RF_PATH_TX_MASK; + rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32); + + /* Power down RF module */ + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0); +} + +static void rtl8188f_usb_quirks(struct rtl8xxxu_priv *priv) +{ + u16 val16; + u32 val32; + + val16 = rtl8xxxu_read16(priv, REG_CR); + val16 |= (CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE); + rtl8xxxu_write16(priv, REG_CR, val16); + + val32 = rtl8xxxu_read32(priv, REG_TXDMA_OFFSET_CHK); + val32 |= TXDMA_OFFSET_DROP_DATA_EN; + rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, val32); +} + +struct rtl8xxxu_fileops rtl8188fu_fops = { + .parse_efuse = rtl8188fu_parse_efuse, + .load_firmware = rtl8188fu_load_firmware, + .power_on = rtl8188fu_power_on, + .power_off = rtl8188fu_power_off, + .reset_8051 = rtl8xxxu_reset_8051, + .llt_init = rtl8xxxu_auto_llt_table, + .init_phy_bb = rtl8188fu_init_phy_bb, + .init_phy_rf = rtl8188fu_init_phy_rf, + .phy_init_antenna_selection = rtl8723bu_phy_init_antenna_selection, + .phy_lc_calibrate = rtl8188f_phy_lc_calibrate, + .phy_iq_calibrate = rtl8188fu_phy_iq_calibrate, + .config_channel = rtl8188fu_config_channel, + .parse_rx_desc = rtl8xxxu_parse_rxdesc24, + .init_aggregation = rtl8188fu_init_aggregation, + .init_statistics = rtl8188fu_init_statistics, + .enable_rf = rtl8188f_enable_rf, + .disable_rf = rtl8188f_disable_rf, + .usb_quirks = rtl8188f_usb_quirks, + .set_tx_power = rtl8188f_set_tx_power, + .update_rate_mask = rtl8xxxu_gen2_update_rate_mask, + .report_connect = rtl8xxxu_gen2_report_connect, + .fill_txdesc = rtl8xxxu_fill_txdesc_v2, + .writeN_block_size = 128, + .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24), + .tx_desc_size = sizeof(struct rtl8xxxu_txdesc40), + .has_s0s1 = 1, + .has_tx_report = 1, + .gen2_thermal_meter = 1, + .needs_full_init = 1, + .adda_1t_init = 0x03c00014, + .adda_1t_path_on = 0x03c00014, + .trxff_boundary = 0x3f7f, + .pbp_rx = PBP_PAGE_SIZE_256, + .pbp_tx = PBP_PAGE_SIZE_256, + .mactable = rtl8188f_mac_init_table, + .total_page_num = TX_TOTAL_PAGE_NUM_8188F, + .page_num_hi = TX_PAGE_NUM_HI_PQ_8188F, + .page_num_lo = TX_PAGE_NUM_LO_PQ_8188F, + .page_num_norm = TX_PAGE_NUM_NORM_PQ_8188F, +}; diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c index 27c4cb688be4..dd84da51686c 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c @@ -549,6 +549,7 @@ struct rtl8xxxu_fileops rtl8192cu_fops = { .llt_init = rtl8xxxu_init_llt_table, .init_phy_bb = rtl8xxxu_gen1_init_phy_bb, .init_phy_rf = rtl8192cu_init_phy_rf, + .phy_lc_calibrate = rtl8723a_phy_lc_calibrate, .phy_iq_calibrate = rtl8xxxu_gen1_phy_iq_calibrate, .config_channel = rtl8xxxu_gen1_config_channel, .parse_rx_desc = rtl8xxxu_parse_rxdesc16, diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c index b06508d0cdf8..c37bae079cf6 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c @@ -1680,6 +1680,7 @@ struct rtl8xxxu_fileops rtl8192eu_fops = { .llt_init = rtl8xxxu_auto_llt_table, .init_phy_bb = rtl8192eu_init_phy_bb, .init_phy_rf = rtl8192eu_init_phy_rf, + .phy_lc_calibrate = rtl8723a_phy_lc_calibrate, .phy_iq_calibrate = rtl8192eu_phy_iq_calibrate, .config_channel = rtl8xxxu_gen2_config_channel, .parse_rx_desc = rtl8xxxu_parse_rxdesc24, diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c index 4f93f88716a9..e18ddd441728 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723a.c @@ -366,6 +366,7 @@ struct rtl8xxxu_fileops rtl8723au_fops = { .llt_init = rtl8xxxu_init_llt_table, .init_phy_bb = rtl8xxxu_gen1_init_phy_bb, .init_phy_rf = rtl8723au_init_phy_rf, + .phy_lc_calibrate = rtl8723a_phy_lc_calibrate, .phy_iq_calibrate = rtl8xxxu_gen1_phy_iq_calibrate, .config_channel = rtl8xxxu_gen1_config_channel, .parse_rx_desc = rtl8xxxu_parse_rxdesc16, diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c index a71e1816e632..7c9b8432a4e9 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c @@ -518,7 +518,7 @@ static int rtl8723bu_init_phy_rf(struct rtl8xxxu_priv *priv) return ret; } -static void rtl8723bu_phy_init_antenna_selection(struct rtl8xxxu_priv *priv) +void rtl8723bu_phy_init_antenna_selection(struct rtl8xxxu_priv *priv) { u32 val32; @@ -1650,6 +1650,7 @@ struct rtl8xxxu_fileops rtl8723bu_fops = { .init_phy_bb = rtl8723bu_init_phy_bb, .init_phy_rf = rtl8723bu_init_phy_rf, .phy_init_antenna_selection = rtl8723bu_phy_init_antenna_selection, + .phy_lc_calibrate = rtl8723a_phy_lc_calibrate, .phy_iq_calibrate = rtl8723bu_phy_iq_calibrate, .config_channel = rtl8xxxu_gen2_config_channel, .parse_rx_desc = rtl8xxxu_parse_rxdesc24, diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c index 566061935c80..32ab6ed5b9b6 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c @@ -52,6 +52,7 @@ MODULE_FIRMWARE("rtlwifi/rtl8192cufw_TMSC.bin"); MODULE_FIRMWARE("rtlwifi/rtl8192eu_nic.bin"); MODULE_FIRMWARE("rtlwifi/rtl8723bu_nic.bin"); MODULE_FIRMWARE("rtlwifi/rtl8723bu_bt.bin"); +MODULE_FIRMWARE("rtlwifi/rtl8188fufw.bin"); module_param_named(debug, rtl8xxxu_debug, int, 0600); MODULE_PARM_DESC(debug, "Set debug mask"); @@ -1606,6 +1607,7 @@ static void rtl8xxxu_print_chipinfo(struct rtl8xxxu_priv *priv) static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv) { + const struct usb_device_descriptor *descriptor = &priv->udev->descriptor; struct device *dev = &priv->udev->dev; struct ieee80211_hw *hw = priv->hw; u32 val32, bonding; @@ -1619,6 +1621,17 @@ static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv) return -ENOTSUPP; } + if (descriptor->idVendor == USB_VENDOR_ID_REALTEK && + descriptor->idProduct == 0xf179) { + sprintf(priv->chip_name, "8188FU"); + priv->rtl_chip = RTL8188F; + priv->rf_paths = 1; + priv->rx_paths = 1; + priv->tx_paths = 1; + priv->has_wifi = 1; + goto skip_complicated_chip_detection; + } + if (val32 & SYS_CFG_BT_FUNC) { if (priv->chip_cut >= 3) { sprintf(priv->chip_name, "8723BU"); @@ -1685,11 +1698,14 @@ static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv) priv->has_wifi = 1; } +skip_complicated_chip_detection: + hw->wiphy->available_antennas_tx = BIT(priv->tx_paths) - 1; hw->wiphy->available_antennas_rx = BIT(priv->rx_paths) - 1; switch (priv->rtl_chip) { case RTL8188E: + case RTL8188F: case RTL8192E: case RTL8723B: switch (val32 & SYS_CFG_VENDOR_EXT_MASK) { @@ -1720,7 +1736,18 @@ static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv) val32 = rtl8xxxu_read32(priv, REG_GPIO_OUTSTS); priv->rom_rev = (val32 & GPIO_RF_RL_ID) >> 28; - val16 = rtl8xxxu_read16(priv, REG_NORMAL_SIE_EP_TX); + /* + * 8188FU vendor driver doesn't use REG_NORMAL_SIE_EP_TX, + * it just decides the queue mapping based on nr_out_eps. + * However, reading the register returns "0x321" which + * results in a wrong ep_tx_count of 3 and most frames + * not being transmitted. + */ + if (priv->rtl_chip == RTL8188F) + val16 = 0; + else + val16 = rtl8xxxu_read16(priv, REG_NORMAL_SIE_EP_TX); + if (val16 & NORMAL_SIE_EP_TX_HIGH_MASK) { priv->ep_tx_high_queue = 1; priv->ep_tx_count++; @@ -1763,7 +1790,7 @@ static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv) return 0; } -static int +int rtl8xxxu_read_efuse8(struct rtl8xxxu_priv *priv, u16 offset, u8 *data) { int i; @@ -1979,7 +2006,7 @@ static int rtl8xxxu_start_firmware(struct rtl8xxxu_priv *priv) /* * Init H2C command */ - if (priv->rtl_chip == RTL8723B) + if (priv->rtl_chip == RTL8723B || priv->rtl_chip == RTL8188F) rtl8xxxu_write8(priv, REG_HMTFR, 0x0f); exit: return ret; @@ -2099,6 +2126,7 @@ int rtl8xxxu_load_firmware(struct rtl8xxxu_priv *priv, char *fw_name) case 0x88c0: case 0x5300: case 0x2300: + case 0x88f0: break; default: ret = -EINVAL; @@ -2166,7 +2194,9 @@ rtl8xxxu_init_mac(struct rtl8xxxu_priv *priv) } } - if (priv->rtl_chip != RTL8723B && priv->rtl_chip != RTL8192E) + if (priv->rtl_chip != RTL8723B && + priv->rtl_chip != RTL8192E && + priv->rtl_chip != RTL8188F) rtl8xxxu_write8(priv, REG_MAX_AGGR_NUM, 0x0a); return 0; @@ -3427,7 +3457,7 @@ void rtl8xxxu_gen1_phy_iq_calibrate(struct rtl8xxxu_priv *priv) priv->bb_recovery_backup, RTL8XXXU_BB_REGS); } -static void rtl8723a_phy_lc_calibrate(struct rtl8xxxu_priv *priv) +void rtl8723a_phy_lc_calibrate(struct rtl8xxxu_priv *priv) { u32 val32; u32 rf_amode, rf_bmode = 0, lstf; @@ -4031,6 +4061,9 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) if (priv->rtl_chip == RTL8192E) { rtl8xxxu_write32(priv, REG_HIMR0, 0x00); rtl8xxxu_write32(priv, REG_HIMR1, 0x00); + } else if (priv->rtl_chip == RTL8188F) { + rtl8xxxu_write32(priv, REG_HISR0, 0xffffffff); + rtl8xxxu_write32(priv, REG_HISR1, 0xffffffff); } else { /* * Enable all interrupts - not obvious USB needs to do this @@ -4050,11 +4083,25 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) RCR_APPEND_PHYSTAT | RCR_APPEND_ICV | RCR_APPEND_MIC; rtl8xxxu_write32(priv, REG_RCR, val32); - /* - * Accept all multicast - */ - rtl8xxxu_write32(priv, REG_MAR, 0xffffffff); - rtl8xxxu_write32(priv, REG_MAR + 4, 0xffffffff); + if (priv->rtl_chip == RTL8188F) { + /* Accept all data frames */ + rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0xffff); + + /* + * Since ADF is removed from RCR, ps-poll will not be indicate to driver, + * RxFilterMap should mask ps-poll to gurantee AP mode can rx ps-poll. + */ + rtl8xxxu_write16(priv, REG_RXFLTMAP1, 0x400); + + /* Accept all management frames */ + rtl8xxxu_write16(priv, REG_RXFLTMAP0, 0xffff); + } else { + /* + * Accept all multicast + */ + rtl8xxxu_write32(priv, REG_MAR, 0xffffffff); + rtl8xxxu_write32(priv, REG_MAR + 4, 0xffffffff); + } /* * Init adaptive controls @@ -4105,14 +4152,17 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) val16 = BEACON_DISABLE_TSF_UPDATE | (BEACON_DISABLE_TSF_UPDATE << 8); rtl8xxxu_write16(priv, REG_BEACON_CTRL, val16); rtl8xxxu_write16(priv, REG_TBTT_PROHIBIT, 0x6404); - rtl8xxxu_write8(priv, REG_DRIVER_EARLY_INT, DRIVER_EARLY_INT_TIME); + if (priv->rtl_chip != RTL8188F) + /* Firmware will control REG_DRVERLYINT when power saving is enable, */ + /* so don't set this register on STA mode. */ + rtl8xxxu_write8(priv, REG_DRIVER_EARLY_INT, DRIVER_EARLY_INT_TIME); rtl8xxxu_write8(priv, REG_BEACON_DMA_TIME, BEACON_DMA_ATIME_INT_TIME); rtl8xxxu_write16(priv, REG_BEACON_TCFG, 0x660F); /* * Initialize burst parameters */ - if (priv->rtl_chip == RTL8723B) { + if (priv->rtl_chip == RTL8723B || priv->rtl_chip == RTL8188F) { /* * For USB high speed set 512B packets */ @@ -4130,13 +4180,26 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) rtl8xxxu_write8(priv, REG_HT_SINGLE_AMPDU_8723B, val8); rtl8xxxu_write16(priv, REG_MAX_AGGR_NUM, 0x0c14); - rtl8xxxu_write8(priv, REG_AMPDU_MAX_TIME_8723B, 0x5e); + if (priv->rtl_chip == RTL8723B) + val8 = 0x5e; + else if (priv->rtl_chip == RTL8188F) + val8 = 0x70; /* 0x5e would make it very slow */ + rtl8xxxu_write8(priv, REG_AMPDU_MAX_TIME_8723B, val8); rtl8xxxu_write32(priv, REG_AGGLEN_LMT, 0xffffffff); rtl8xxxu_write8(priv, REG_RX_PKT_LIMIT, 0x18); rtl8xxxu_write8(priv, REG_PIFS, 0x00); - rtl8xxxu_write8(priv, REG_USTIME_TSF_8723B, 0x50); - rtl8xxxu_write8(priv, REG_USTIME_EDCA, 0x50); - + if (priv->rtl_chip == RTL8188F) { + rtl8xxxu_write8(priv, REG_FWHW_TXQ_CTRL, FWHW_TXQ_CTRL_AMPDU_RETRY); + rtl8xxxu_write32(priv, REG_FAST_EDCA_CTRL, 0x03086666); + } + if (priv->rtl_chip == RTL8723B) + val8 = 0x50; + else if (priv->rtl_chip == RTL8188F) + val8 = 0x28; /* 0x50 would make the upload slow */ + rtl8xxxu_write8(priv, REG_USTIME_TSF_8723B, val8); + rtl8xxxu_write8(priv, REG_USTIME_EDCA, val8); + + /* to prevent mac is reseted by bus. */ val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL); val8 |= BIT(5) | BIT(6); rtl8xxxu_write8(priv, REG_RSV_CTRL, val8); @@ -4145,6 +4208,11 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) if (fops->init_aggregation) fops->init_aggregation(priv); + if (priv->rtl_chip == RTL8188F) { + rtl8xxxu_write16(priv, REG_PKT_VO_VI_LIFE_TIME, 0x0400); /* unit: 256us. 256ms */ + rtl8xxxu_write16(priv, REG_PKT_BE_BK_LIFE_TIME, 0x0400); /* unit: 256us. 256ms */ + } + /* * Enable CCK and OFDM block */ @@ -4163,7 +4231,7 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) fops->set_tx_power(priv, 1, false); /* Let the 8051 take control of antenna setting */ - if (priv->rtl_chip != RTL8192E) { + if (priv->rtl_chip != RTL8192E && priv->rtl_chip != RTL8188F) { val8 = rtl8xxxu_read8(priv, REG_LEDCFG2); val8 |= LEDCFG2_DPDT_SELECT; rtl8xxxu_write8(priv, REG_LEDCFG2, val8); @@ -4174,7 +4242,8 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) /* Disable BAR - not sure if this has any effect on USB */ rtl8xxxu_write32(priv, REG_BAR_MODE_CTRL, 0x0201ffff); - rtl8xxxu_write16(priv, REG_FAST_EDCA_CTRL, 0); + if (priv->rtl_chip != RTL8188F) + rtl8xxxu_write16(priv, REG_FAST_EDCA_CTRL, 0); if (fops->init_statistics) fops->init_statistics(priv); @@ -4191,20 +4260,38 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) * Reset USB mode switch setting */ rtl8xxxu_write8(priv, REG_ACLK_MON, 0x00); + } else if (priv->rtl_chip == RTL8188F) { + /* + * Init GPIO settings for 8188f + */ + val8 = rtl8xxxu_read8(priv, REG_GPIO_MUXCFG); + val8 &= ~GPIO_MUXCFG_IO_SEL_ENBT; + rtl8xxxu_write8(priv, REG_GPIO_MUXCFG, val8); } - rtl8723a_phy_lc_calibrate(priv); + if (priv->rtl_chip == RTL8188F) + /* CCK PD */ + rtl8xxxu_write8(priv, REG_CCK_PD_THRESH, CCK_PD_TYPE1_LV1_TH); + + fops->phy_lc_calibrate(priv); fops->phy_iq_calibrate(priv); /* * This should enable thermal meter */ - if (fops->gen2_thermal_meter) - rtl8xxxu_write_rfreg(priv, - RF_A, RF6052_REG_T_METER_8723B, 0x37cf8); - else + if (fops->gen2_thermal_meter) { + if (priv->rtl_chip == RTL8188F) { + val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_T_METER_8723B); + val32 |= 0x30000; + rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_T_METER_8723B, val32); + } else { + rtl8xxxu_write_rfreg(priv, + RF_A, RF6052_REG_T_METER_8723B, 0x37cf8); + } + } else { rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_T_METER, 0x60); + } /* Set NAV_UPPER to 30000us */ val8 = ((30000 + NAV_UPPER_UNIT - 1) / NAV_UPPER_UNIT); @@ -6617,6 +6704,7 @@ static int rtl8xxxu_probe(struct usb_interface *interface, case 0x8178: case 0x817f: case 0x818b: + case 0xf179: untested = 0; break; } @@ -6832,6 +6920,9 @@ static const struct usb_device_id dev_table[] = { .driver_info = (unsigned long)&rtl8723bu_fops}, {USB_DEVICE_AND_INTERFACE_INFO(0x7392, 0xa611, 0xff, 0xff, 0xff), .driver_info = (unsigned long)&rtl8723bu_fops}, +/* RTL8188FU */ +{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0xf179, 0xff, 0xff, 0xff), + .driver_info = (unsigned long)&rtl8188fu_fops}, #ifdef CONFIG_RTL8XXXU_UNTESTED /* Still supported by rtlwifi */ {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8176, 0xff, 0xff, 0xff), diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h index 438b65ba9640..35bde1404793 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h @@ -135,6 +135,7 @@ #define REG_CAL_TIMER 0x003c #define REG_ACLK_MON 0x003e #define REG_GPIO_MUXCFG 0x0040 +#define GPIO_MUXCFG_IO_SEL_ENBT BIT(5) #define REG_GPIO_IO_SEL 0x0042 #define REG_MAC_PINMUX_CFG 0x0043 #define REG_GPIO_PIN_CTRL 0x0044 @@ -391,6 +392,7 @@ #define REG_CPWM 0x012f #define REG_FWIMR 0x0130 #define REG_FWISR 0x0134 +#define REG_FTIMR 0x0138 #define REG_PKTBUF_DBG_CTRL 0x0140 #define REG_PKTBUF_DBG_DATA_L 0x0144 #define REG_PKTBUF_DBG_DATA_H 0x0148 @@ -440,6 +442,9 @@ #define REG_FIFOPAGE 0x0204 #define REG_TDECTRL 0x0208 + +#define REG_DWBCN0_CTRL_8188F REG_TDECTRL + #define REG_TXDMA_OFFSET_CHK 0x020c #define TXDMA_OFFSET_DROP_DATA_EN BIT(9) #define REG_TXDMA_STATUS 0x0210 @@ -925,6 +930,7 @@ #define REG_FPGA0_XA_LSSI_READBACK 0x08a0 /* Tranceiver LSSI Readback */ #define REG_FPGA0_XB_LSSI_READBACK 0x08a4 +#define REG_FPGA0_PSD_REPORT 0x08b4 #define REG_HSPI_XA_READBACK 0x08b8 /* Transceiver A HSPI read */ #define REG_HSPI_XB_READBACK 0x08bc /* Transceiver B HSPI read */ @@ -936,6 +942,7 @@ #define REG_RFE_PATH_SELECT 0x0940 /* 8723BU */ #define REG_RFE_BUFFER 0x0944 /* 8723BU */ #define REG_S0S1_PATH_SWITCH 0x0948 /* 8723BU */ +#define REG_OFDM_RX_DFIR 0x954 #define REG_CCK0_SYSTEM 0x0a00 #define CCK0_SIDEBAND BIT(4) @@ -946,6 +953,13 @@ #define CCK0_AFE_RX_ANT_A 0 #define CCK0_AFE_RX_ANT_B (BIT(24) | BIT(26)) +#define REG_CCK_PD_THRESH 0x0a0a +#define CCK_PD_TYPE1_LV0_TH 0x40 +#define CCK_PD_TYPE1_LV1_TH 0x83 +#define CCK_PD_TYPE1_LV2_TH 0xcd +#define CCK_PD_TYPE1_LV3_TH 0xdd +#define CCK_PD_TYPE1_LV4_TH 0xed + #define REG_CONFIG_ANT_A 0x0b68 #define REG_CONFIG_ANT_B 0x0b6c @@ -965,6 +979,7 @@ #define REG_OFDM0_FA_RSTC 0x0c0c +#define REG_OFDM0_XA_RX_AFE 0x0c10 #define REG_OFDM0_XA_RX_IQ_IMBALANCE 0x0c14 #define REG_OFDM0_XB_RX_IQ_IMBALANCE 0x0c1c @@ -1011,6 +1026,9 @@ #define OFDM_LSTF_MASK 0x70000000 #define REG_OFDM1_TRX_PATH_ENABLE 0x0d04 +#define REG_OFDM1_CFO_TRACKING 0x0d2c +#define REG_OFDM1_CSI_FIX_MASK1 0x0d40 +#define REG_OFDM1_CSI_FIX_MASK2 0x0d44 #define REG_TX_AGC_A_RATE18_06 0x0e00 #define REG_TX_AGC_A_RATE54_24 0x0e04 @@ -1202,6 +1220,7 @@ #define RF6052_REG_UNKNOWN_43 0x43 #define RF6052_REG_UNKNOWN_55 0x55 #define RF6052_REG_UNKNOWN_56 0x56 +#define RF6052_REG_RXG_MIX_SWBW 0x87 #define RF6052_REG_S0S1 0xb0 #define RF6052_REG_UNKNOWN_DF 0xdf #define RF6052_REG_UNKNOWN_ED 0xed