From patchwork Wed Nov 9 09:09:55 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "larry.lai" X-Patchwork-Id: 623202 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id E64F7C43217 for ; Wed, 9 Nov 2022 09:13:15 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229518AbiKIJNN (ORCPT ); Wed, 9 Nov 2022 04:13:13 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46866 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229734AbiKIJMk (ORCPT ); Wed, 9 Nov 2022 04:12:40 -0500 Received: from APC01-SG2-obe.outbound.protection.outlook.com (mail-sgaapc01on2111.outbound.protection.outlook.com [40.107.215.111]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A101223BD5; Wed, 9 Nov 2022 01:11:49 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=SHPd0GiYdrVYcOnTGJcGIvTZP0TsNiMCSRmJBTNPv+w7lhN7TMxVZEk5PdESs6xnDz8Uzwa3zsDL6nih96K0CRbs+NnHmbqO7GSie7gcn+M3YI840qGJbD9Bkgez41qmiWPwjKKmIZKsPVNvQPpYJ2Dd4Y6MsVKz17Ck+9bV7XpE/1E1+m0+I9Mx4evwYm3Tv+GEUZzKcXK39ylmn2mcjxH3VqnpBymn6+IHfdb8A/35erU519YZEvQmNUFMmcIreV9v9L7ouL2AUICcMr+pBvwIYCGd+bcpt3cEsTn88DDFBzx/jpwMcaWmM8VjaXq0XiX0yEw5qcnBubtcvuVRIA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=Rf4Kmr+RMT+p4uVKVHyZoTkTycjPeqI5IzzD1cJbtlc=; b=mA+wSBnMpqt/ck88WtSuogLcHJUs30em04PDJowsmCXOFYGO1SF657IZgLQHykVbERVqt96NyPiOuTChNNIKmBGi4xNhNSZ1fCrl4qTmJkDz2A19VpMMMSaCNlr98wd7bWdXokDOEQYDHCcNPRYhHOfKms4IFSpk1KHQQc+1hSPqr/7OvW4in33hDkTNESB/0KyXz/NxL+wG6ApKhjwjgY/sz1pFWWSs5FLPL+pvEoyriL+0v5N+htPWLiIOCyWZBBB9PW3VR0+WsjA5/vhXvrIHwXNorXyxRb/ZCK1n+Wd6npU/0aqpAiVx40ElsycbtudzOFUFfsBo6IijaMhx+w== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=yunjingtech.com; dmarc=pass action=none header.from=yunjingtech.com; dkim=pass header.d=yunjingtech.com; arc=none Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=yunjingtech.com; Received: from SG2PR06MB3742.apcprd06.prod.outlook.com (2603:1096:4:d8::14) by SEYPR06MB5964.apcprd06.prod.outlook.com (2603:1096:101:d9::9) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.5791.27; Wed, 9 Nov 2022 09:11:46 +0000 Received: from SG2PR06MB3742.apcprd06.prod.outlook.com ([fe80::9ac2:8b0a:9ad:24b5]) by SG2PR06MB3742.apcprd06.prod.outlook.com ([fe80::9ac2:8b0a:9ad:24b5%5]) with mapi id 15.20.5791.027; Wed, 9 Nov 2022 09:11:46 +0000 From: chengwei To: lee@kernel.org, andriy.shevchenko@linux.intel.com, linus.walleij@linaro.org, pavel@ucw.cz Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, linux-leds@vger.kernel.org, GaryWang@aaeon.com.tw, musa.lin@yunjingtech.com, jack.chang@yunjingtech.com, noah.hung@yunjingtech.com, chengwei , Javier Arteaga , Nicola Lunghi Subject: [PATCH V3 1/3] mfd: Add support for UP board CPLD/FPGA Date: Wed, 9 Nov 2022 17:09:55 +0800 Message-Id: <20221109090957.13167-2-larry.lai@yunjingtech.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20221109090957.13167-1-larry.lai@yunjingtech.com> References: <20221109090957.13167-1-larry.lai@yunjingtech.com> X-ClientProxiedBy: TYAPR01CA0059.jpnprd01.prod.outlook.com (2603:1096:404:2b::23) To SG2PR06MB3742.apcprd06.prod.outlook.com (2603:1096:4:d8::14) MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: SG2PR06MB3742:EE_|SEYPR06MB5964:EE_ X-MS-Office365-Filtering-Correlation-Id: 34240231-3568-47b7-71b8-08dac2326d23 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:SG2PR06MB3742.apcprd06.prod.outlook.com; PTR:; CAT:NONE; SFS:(13230022)(346002)(136003)(396003)(366004)(376002)(39830400003)(451199015)(41300700001)(7416002)(5660300002)(8936002)(6486002)(30864003)(2906002)(6506007)(26005)(1076003)(83380400001)(478600001)(52116002)(38350700002)(2616005)(6666004)(38100700002)(66476007)(66556008)(66946007)(4326008)(186003)(6512007)(316002)(54906003)(86362001)(8676002)(36756003)(43062005); DIR:OUT; SFP:1102; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: yunjingtech.com X-MS-Exchange-CrossTenant-Network-Message-Id: 34240231-3568-47b7-71b8-08dac2326d23 X-MS-Exchange-CrossTenant-AuthSource: SG2PR06MB3742.apcprd06.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 09 Nov 2022 09:11:46.3882 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: be2d5505-f7e6-4600-bbe2-b3201c91b344 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: ch1N/pXQls3YI8iQ6L78L5je8cF7W4z0yr8PciNGfA5LT2nzeXVNGIV8g7TBVA28j92/SVjfZhUECUz9Vt3rzQddIjse8gKqK6dun8h3gdc= X-MS-Exchange-Transport-CrossTenantHeadersStamped: SEYPR06MB5964 Precedence: bulk List-ID: X-Mailing-List: linux-leds@vger.kernel.org The UP Squared board implements certain features (pin control, onboard LEDs or CEC) through an on-board CPLD/FPGA. This mfd driver implements the line protocol to read and write registers from the FPGA through regmap. The register address map is also included. The UP Boards provide a few I/O pin headers (for both GPIO and functions), including a 40-pin Raspberry Pi compatible header. This patch implements support for the FPGA-based pin controller that manages direction and enable state for those header pins. Partial support UP boards: * UP core + CREX * UP core + CRST02 PATCH V3: (1) fixed kernel test robot compiler warning PATCH V2: (1) Synchronizing upboard github to rc2 (2) Refer 2022/10/31 Lee Jones review, fixed some of the issues. Signed-off-by: Javier Arteaga [merge various fixes] Signed-off-by: Nicola Lunghi Signed-off-by: chengwei --- drivers/mfd/Kconfig | 12 + drivers/mfd/Makefile | 1 + drivers/mfd/upboard-fpga.c | 620 +++++++++++++++++++++++++++++++ include/linux/mfd/upboard-fpga.h | 56 +++ 4 files changed, 689 insertions(+) create mode 100644 drivers/mfd/upboard-fpga.c create mode 100644 include/linux/mfd/upboard-fpga.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index abb58ab1a1a4..c1d72a70e5f2 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -2104,6 +2104,18 @@ config MFD_QCOM_PM8008 under it in the device tree. Additional drivers must be enabled in order to use the functionality of the device. +config MFD_UPBOARD_FPGA + tristate "Support for the UP board FPGA" + select MFD_CORE + depends on X86 && ACPI + help + Select this option to enable the Intel AAEON UP and UP^2 on-board FPGA. + The UP board implements certain features (pin control, onboard LEDs or + CEC) through an on-board FPGA. + + To compile this driver as a module, choose M here: the module will be + called upboard-fpga. + menu "Multimedia Capabilities Port drivers" depends on ARCH_SA1100 diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 858cacf659d6..d9d10e3664f7 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -250,6 +250,7 @@ obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o obj-$(CONFIG_MFD_ALTERA_SYSMGR) += altera-sysmgr.o obj-$(CONFIG_MFD_STPMIC1) += stpmic1.o obj-$(CONFIG_MFD_SUN4I_GPADC) += sun4i-gpadc.o +obj-$(CONFIG_MFD_UPBOARD_FPGA) += upboard-fpga.o obj-$(CONFIG_MFD_STM32_LPTIMER) += stm32-lptimer.o obj-$(CONFIG_MFD_STM32_TIMERS) += stm32-timers.o diff --git a/drivers/mfd/upboard-fpga.c b/drivers/mfd/upboard-fpga.c new file mode 100644 index 000000000000..89d0d36d2d17 --- /dev/null +++ b/drivers/mfd/upboard-fpga.c @@ -0,0 +1,620 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UP Board main platform driver and FPGA configuration support + * + * Copyright (c) 2022, Emutex Ltd. All rights reserved. + * + * Author: Javier Arteaga + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct upboard_fpga_data { + const struct regmap_config *regmapconf; + const struct mfd_cell *cells; + size_t ncells; +}; + +#define UPBOARD_LED_CELL(led_data, n) \ + MFD_CELL_BASIC("upboard-led", NULL, &led_data[(n)], \ + sizeof(*(led_data)), (n)) + +#define AAEON_MANUFACTURER_ID 0x01 +#define SUPPORTED_FW_MAJOR 0x0 +#define MENUFACTURER_ID_MASK 0xFF + +#define FIRMWARE_ID_BUILD_OFFSET 12 +#define FIRMWARE_ID_MAJOR_OFFSET 8 +#define FIRMWARE_ID_MINOR_OFFSET 4 +#define FIRMWARE_ID_PATCH_OFFSET 0 +#define FIRMWARE_ID_MASK 0xF + +#define UPFPGA_QUIRK_UNINITIALISED BIT(0) +#define UPFPGA_QUIRK_HRV1_IS_PROTO2 BIT(1) +#define UPFPGA_QUIRK_GPIO_LED BIT(2) + +#define UPBOARD_DEVID 0 + +/* UP-CREX carrier board for UP Core */ + +/* same MAXV config as UP1 (proto2 release) */ +#define upboard_upcore_crex_fpga_data upboard_up_fpga_data + +#define APL_GPIO_218 507 + +/* UP board */ + +static int upboard_fpga_read(void *context, unsigned int reg, unsigned int *val) +{ + struct upboard_fpga * const fpga = context; + int i; + + if (IS_ERR(fpga->clear_gpio)) //for none fpga boards + return 0; + + gpiod_set_value(fpga->clear_gpio, 0); + gpiod_set_value(fpga->clear_gpio, 1); + + reg |= UPFPGA_READ_FLAG; + + for (i = UPFPGA_ADDRESS_SIZE; i >= 0; i--) { + gpiod_set_value(fpga->strobe_gpio, 0); + gpiod_set_value(fpga->datain_gpio, (reg >> i) & 0x1); + gpiod_set_value(fpga->strobe_gpio, 1); + } + + gpiod_set_value(fpga->strobe_gpio, 0); + *val = 0; + + for (i = UPFPGA_REGISTER_SIZE - 1; i >= 0; i--) { + gpiod_set_value(fpga->strobe_gpio, 1); + gpiod_set_value(fpga->strobe_gpio, 0); + *val |= gpiod_get_value(fpga->dataout_gpio) << i; + } + + gpiod_set_value(fpga->strobe_gpio, 1); + + return 0; +} + +static int upboard_fpga_write(void *context, unsigned int reg, unsigned int val) +{ + struct upboard_fpga * const fpga = context; + int i; + + if (IS_ERR(fpga->clear_gpio)) //for none fpga boards + return 0; + + gpiod_set_value(fpga->clear_gpio, 0); + gpiod_set_value(fpga->clear_gpio, 1); + + for (i = UPFPGA_ADDRESS_SIZE; i >= 0; i--) { + gpiod_set_value(fpga->strobe_gpio, 0); + gpiod_set_value(fpga->datain_gpio, (reg >> i) & 0x1); + gpiod_set_value(fpga->strobe_gpio, 1); + } + + gpiod_set_value(fpga->strobe_gpio, 0); + + for (i = UPFPGA_REGISTER_SIZE - 1; i >= 0; i--) { + gpiod_set_value(fpga->datain_gpio, (val >> i) & 0x1); + gpiod_set_value(fpga->strobe_gpio, 1); + gpiod_set_value(fpga->strobe_gpio, 0); + } + + gpiod_set_value(fpga->strobe_gpio, 1); + + return 0; +} + +static const struct regmap_range upboard_up_readable_ranges[] = { + regmap_reg_range(UPFPGA_REG_PLATFORM_ID, UPFPGA_REG_FIRMWARE_ID), + regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN0), + regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR1), +}; + +static const struct regmap_range upboard_up_writable_ranges[] = { + regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN0), + regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR1), +}; + +static const struct regmap_access_table upboard_up_readable_table = { + .yes_ranges = upboard_up_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(upboard_up_readable_ranges), +}; + +static const struct regmap_access_table upboard_up_writable_table = { + .yes_ranges = upboard_up_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(upboard_up_writable_ranges), +}; + +static const struct regmap_config upboard_up_regmap_config = { + .reg_bits = UPFPGA_ADDRESS_SIZE, + .val_bits = UPFPGA_REGISTER_SIZE, + .max_register = UPFPGA_REG_MAX, + .reg_read = upboard_fpga_read, + .reg_write = upboard_fpga_write, + .fast_io = false, + .cache_type = REGCACHE_RBTREE, + .rd_table = &upboard_up_readable_table, + .wr_table = &upboard_up_writable_table, +}; + +static struct upboard_led_data upboard_up_led_data[] = { + { .bit = 0, .colour = "yellow" }, + { .bit = 1, .colour = "green" }, + { .bit = 2, .colour = "red" }, +}; + +static const struct mfd_cell upboard_up_mfd_cells[] = { + { .name = "upboard-pinctrl" }, + UPBOARD_LED_CELL(upboard_up_led_data, 0), + UPBOARD_LED_CELL(upboard_up_led_data, 1), + UPBOARD_LED_CELL(upboard_up_led_data, 2), +}; + +static const struct upboard_fpga_data upboard_up_fpga_data = { + .regmapconf = &upboard_up_regmap_config, + .cells = upboard_up_mfd_cells, + .ncells = ARRAY_SIZE(upboard_up_mfd_cells), +}; + +//UP-EHL +static const struct mfd_cell upboard_pinctrl_cells[] = { + { .name = "upboard-pinctrl" }, +}; + +static const struct upboard_fpga_data upboard_pinctrl_data = { + .regmapconf = &upboard_up_regmap_config, + .cells = upboard_pinctrl_cells, + .ncells = ARRAY_SIZE(upboard_pinctrl_cells), +}; + +/* UP^2 board */ + +static const struct regmap_range upboard_up2_readable_ranges[] = { + regmap_reg_range(UPFPGA_REG_PLATFORM_ID, UPFPGA_REG_FIRMWARE_ID), + regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN1), + regmap_reg_range(UPFPGA_REG_GPIO_EN0, UPFPGA_REG_GPIO_EN2), + regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR2), +}; + +static const struct regmap_range upboard_up2_writable_ranges[] = { + regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN1), + regmap_reg_range(UPFPGA_REG_GPIO_EN0, UPFPGA_REG_GPIO_EN2), + regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR2), +}; + +static const struct regmap_access_table upboard_up2_readable_table = { + .yes_ranges = upboard_up2_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(upboard_up2_readable_ranges), +}; + +static const struct regmap_access_table upboard_up2_writable_table = { + .yes_ranges = upboard_up2_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(upboard_up2_writable_ranges), +}; + +static const struct regmap_config upboard_up2_regmap_config = { + .reg_bits = UPFPGA_ADDRESS_SIZE, + .val_bits = UPFPGA_REGISTER_SIZE, + .max_register = UPFPGA_REG_MAX, + .reg_read = upboard_fpga_read, + .reg_write = upboard_fpga_write, + .fast_io = false, +// .cache_type = REGCACHE_NONE, + .rd_table = &upboard_up2_readable_table, + .wr_table = &upboard_up2_writable_table, +}; + +static struct upboard_led_data upboard_up2_led_data[] = { + { .bit = 0, .colour = "blue" }, + { .bit = 1, .colour = "yellow" }, + { .bit = 2, .colour = "green" }, + { .bit = 3, .colour = "red" }, +}; + +static const struct mfd_cell upboard_up2_mfd_cells[] = { + { .name = "upboard-pinctrl" }, + UPBOARD_LED_CELL(upboard_up2_led_data, 0), + UPBOARD_LED_CELL(upboard_up2_led_data, 1), + UPBOARD_LED_CELL(upboard_up2_led_data, 2), + UPBOARD_LED_CELL(upboard_up2_led_data, 3), +}; + +static const struct upboard_fpga_data upboard_up2_fpga_data = { + .regmapconf = &upboard_up2_regmap_config, + .cells = upboard_up2_mfd_cells, + .ncells = ARRAY_SIZE(upboard_up2_mfd_cells), +}; + +/* UP-CRST02 carrier board for UP Core */ + +/* same MAX10 config as UP2, but same LED cells as UP1 */ +static const struct upboard_fpga_data upboard_upcore_crst02_fpga_data = { + .regmapconf = &upboard_up2_regmap_config, + .cells = upboard_up_mfd_cells, + .ncells = ARRAY_SIZE(upboard_up_mfd_cells), +}; + +static struct gpio_led upboard_gpio_leds[] = { + { + .name = "upboard:blue:", + .gpio = APL_GPIO_218, + .default_state = LEDS_GPIO_DEFSTATE_KEEP, + }, +}; + +static struct gpio_led_platform_data upboard_gpio_led_platform_data = { + .num_leds = ARRAY_SIZE(upboard_gpio_leds), + .leds = upboard_gpio_leds, +}; + +static const struct mfd_cell upboard_gpio_led_cells[] = { + MFD_CELL_BASIC("leds-gpio", NULL, &upboard_gpio_led_platform_data, + sizeof(upboard_gpio_led_platform_data), 0) +}; + +static int __init upboard_fpga_gpio_init(struct upboard_fpga *fpga) +{ + enum gpiod_flags flags; + + flags = fpga->uninitialised ? GPIOD_OUT_LOW : GPIOD_ASIS; + + fpga->enable_gpio = devm_gpiod_get(fpga->dev, "enable", flags); + if (IS_ERR(fpga->enable_gpio)) + return PTR_ERR(fpga->enable_gpio); + + fpga->clear_gpio = devm_gpiod_get(fpga->dev, "clear", GPIOD_OUT_LOW); + if (IS_ERR(fpga->clear_gpio)) + return PTR_ERR(fpga->clear_gpio); + + fpga->strobe_gpio = devm_gpiod_get(fpga->dev, "strobe", GPIOD_OUT_LOW); + if (IS_ERR(fpga->strobe_gpio)) + return PTR_ERR(fpga->strobe_gpio); + + fpga->datain_gpio = devm_gpiod_get(fpga->dev, "datain", GPIOD_OUT_LOW); + if (IS_ERR(fpga->datain_gpio)) + return PTR_ERR(fpga->datain_gpio); + + fpga->dataout_gpio = devm_gpiod_get(fpga->dev, "dataout", GPIOD_IN); + if (IS_ERR(fpga->dataout_gpio)) + return PTR_ERR(fpga->dataout_gpio); + + /* + * The SoC pinctrl driver may not support reserving the GPIO line for + * FPGA reset without causing an undesired reset pulse. This will clear + * any settings on the FPGA, so only do it if we must. + */ + if (fpga->uninitialised) { + fpga->reset_gpio = devm_gpiod_get(fpga->dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(fpga->reset_gpio)) + return PTR_ERR(fpga->reset_gpio); + + gpiod_set_value(fpga->reset_gpio, 1); + } + + gpiod_set_value(fpga->enable_gpio, 1); + fpga->uninitialised = false; + + return 0; +} + +static int __init upboard_fpga_detect_firmware(struct upboard_fpga *fpga) +{ + unsigned int platform_id, manufacturer_id; + unsigned int firmware_id, build, major, minor, patch; + int ret; + + if (!fpga) + return -ENOMEM; + + ret = regmap_read(fpga->regmap, UPFPGA_REG_PLATFORM_ID, &platform_id); + if (ret) + return ret; + + manufacturer_id = platform_id & MENUFACTURER_ID_MASK; + if (manufacturer_id != AAEON_MANUFACTURER_ID) { + dev_err(fpga->dev, + "driver not compatible with custom FPGA FW from manufacturer id 0x%02x. Exiting", + manufacturer_id); + return -ENODEV; + } + + ret = regmap_read(fpga->regmap, UPFPGA_REG_FIRMWARE_ID, &firmware_id); + if (ret) + return ret; + + build = (firmware_id >> FIRMWARE_ID_BUILD_OFFSET) & FIRMWARE_ID_MASK; + major = (firmware_id >> FIRMWARE_ID_MAJOR_OFFSET) & FIRMWARE_ID_MASK; + minor = (firmware_id >> FIRMWARE_ID_MINOR_OFFSET) & FIRMWARE_ID_MASK; + patch = (firmware_id >> FIRMWARE_ID_PATCH_OFFSET) & FIRMWARE_ID_MASK; + + if (major != SUPPORTED_FW_MAJOR) { + dev_dbg(fpga->dev, "unsupported FPGA FW v%u.%u.%u build 0x%02x", + major, minor, patch, build); + + return -ENODEV; + } + + dev_info(fpga->dev, "compatible FPGA FW v%u.%u.%u build 0x%02x", + major, minor, patch, build); + + return 0; +} + +static void upboard_led_gpio_init(struct upboard_fpga *fpga) +{ + struct gpio_led blue_led, yellow_led, green_led, red_led; + struct gpio_desc *desc; + int blue_gpio = -1, yellow_gpio = -1, green_gpio = -1, red_gpio = -1; + int leds = 0; + static struct gpio_led upboard_gpio_leds[8]; + static struct gpio_led_platform_data upboard_gpio_led_platform_data; + static const struct mfd_cell upboard_gpio_led_cells[] = { + MFD_CELL_BASIC("leds-gpio", NULL, + &upboard_gpio_led_platform_data, + sizeof(upboard_gpio_led_platform_data), 0) + }; + + desc = devm_gpiod_get(fpga->dev, "blue", GPIOD_OUT_LOW); + if (!IS_ERR(desc)) { + blue_gpio = desc_to_gpio(desc); + leds++; + devm_gpiod_put(fpga->dev, desc); + } + desc = devm_gpiod_get(fpga->dev, "yellow", GPIOD_OUT_LOW); + if (!IS_ERR(desc)) { + yellow_gpio = desc_to_gpio(desc); + leds++; + devm_gpiod_put(fpga->dev, desc); + } + desc = devm_gpiod_get(fpga->dev, "green", GPIOD_OUT_LOW); + if (!IS_ERR(desc)) { + green_gpio = desc_to_gpio(desc); + leds++; + devm_gpiod_put(fpga->dev, desc); + } + desc = devm_gpiod_get(fpga->dev, "red", GPIOD_OUT_LOW); + if (!IS_ERR(desc)) { + red_gpio = desc_to_gpio(desc); + leds++; + devm_gpiod_put(fpga->dev, desc); + } + + if (leds == 0) //no leds + return; + + leds = 0; + if (blue_gpio > -1) { + blue_led.name = "upboard:blue:"; + blue_led.gpio = blue_gpio; + blue_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + upboard_gpio_leds[leds++] = blue_led; + } + if (yellow_gpio > -1) { + yellow_led.name = "upboard:yellow:"; + yellow_led.gpio = yellow_gpio; + yellow_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + upboard_gpio_leds[leds++] = yellow_led; + } + if (green_gpio > -1) { + green_led.name = "upboard:green:"; + green_led.gpio = green_gpio; + green_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + upboard_gpio_leds[leds++] = green_led; + } + if (red_gpio > -1) { + red_led.name = "upboard:red:"; + red_led.gpio = red_gpio; + red_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + upboard_gpio_leds[leds++] = red_led; + } + + upboard_gpio_led_platform_data.num_leds = leds; + upboard_gpio_led_platform_data.leds = upboard_gpio_leds; + + if (devm_mfd_add_devices(fpga->dev, UPBOARD_DEVID, + upboard_gpio_led_cells, + ARRAY_SIZE(upboard_gpio_led_cells), + NULL, 0, NULL)) { + dev_info(fpga->dev, "Failed to add GPIO leds"); + } +} + +static const struct acpi_device_id upboard_fpga_acpi_match[] = { + { "AANT0000", (kernel_ulong_t)&upboard_pinctrl_data }, + { "AANT0F00", (kernel_ulong_t)&upboard_up_fpga_data }, + { "AANT0F01", (kernel_ulong_t)&upboard_up2_fpga_data }, + { "AANT0F02", (kernel_ulong_t)&upboard_upcore_crex_fpga_data }, + { "AANT0F03", (kernel_ulong_t)&upboard_upcore_crst02_fpga_data }, + { "AANT0F04", (kernel_ulong_t)&upboard_up_fpga_data }, + { } +}; +MODULE_DEVICE_TABLE(acpi, upboard_fpga_acpi_match); + +static const struct dmi_system_id upboard_dmi_table[] __initconst = { + { + .matches = { /* UP */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-CHT01"), + DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V0.4"), + }, + .driver_data = (void *)UPFPGA_QUIRK_UNINITIALISED, + }, + { + .matches = { /* UP2 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-APL01"), + DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V0.3"), + }, + .driver_data = (void *)(UPFPGA_QUIRK_UNINITIALISED | + UPFPGA_QUIRK_HRV1_IS_PROTO2), + }, + { + .matches = { /* UP2 Pro*/ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPN-APL01"), + DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V1.0"), + }, + .driver_data = (void *)UPFPGA_QUIRK_HRV1_IS_PROTO2, + }, + { + .matches = { /* UP2 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-APL01"), + DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V0.4"), + }, + .driver_data = (void *)UPFPGA_QUIRK_HRV1_IS_PROTO2, + }, + { + .matches = { /* UP APL03 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-APL03"), + DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V1.0"), + }, + .driver_data = (void *)(UPFPGA_QUIRK_HRV1_IS_PROTO2 | + UPFPGA_QUIRK_GPIO_LED), + }, + { + .matches = { /* UP Xtreme */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-WHL01"), + DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V0.1"), + }, + }, + { + .matches = { /* UP Xtreme i11 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPX-TGL01"), + }, + }, + { + .matches = { /* UP Xtreme i12 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPX-ADLP01"), + }, + }, + { + .matches = { /* UP Squared 6000*/ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPN-EHL01"), + }, + }, + { + .matches = { /* UPS 6000 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPS-EHL01"), + }, + }, + { } +}; + +static int __init upboard_fpga_probe(struct platform_device *pdev) +{ + struct upboard_fpga *fpga; + const struct acpi_device_id *id; + const struct upboard_fpga_data *fpga_data; + const struct dmi_system_id *system_id; + acpi_handle handle; + acpi_status status; + unsigned long long hrv; + unsigned long quirks = 0; + int ret; + + id = acpi_match_device(upboard_fpga_acpi_match, &pdev->dev); + if (!id) + return -ENODEV; + + handle = ACPI_HANDLE(&pdev->dev); + status = acpi_evaluate_integer(handle, "_HRV", NULL, &hrv); + if (ACPI_FAILURE(status)) { + dev_err(&pdev->dev, "failed to get PCTL revision"); + //return -ENODEV; + } + + system_id = dmi_first_match(upboard_dmi_table); + if (system_id) + quirks = (unsigned long)system_id->driver_data; + + if (hrv == UPFPGA_PROTOCOL_V1_HRV && + (quirks & UPFPGA_QUIRK_HRV1_IS_PROTO2)) + hrv = UPFPGA_PROTOCOL_V2_HRV; + + if (hrv != UPFPGA_PROTOCOL_V2_HRV) { + dev_info(&pdev->dev, "unsupported PCTL revision: %llu", hrv); + //return -ENODEV; + } + + fpga_data = (const struct upboard_fpga_data *) id->driver_data; + + fpga = devm_kzalloc(&pdev->dev, sizeof(*fpga), GFP_KERNEL); + if (!fpga) + return -ENOMEM; + + if (quirks & UPFPGA_QUIRK_UNINITIALISED) { + dev_info(&pdev->dev, "FPGA not initialised by this BIOS"); + fpga->uninitialised = true; + } + + dev_set_drvdata(&pdev->dev, fpga); + fpga->dev = &pdev->dev; + fpga->regmap = devm_regmap_init(&pdev->dev, NULL, + fpga, fpga_data->regmapconf); + fpga->regmapconf = fpga_data->regmapconf; + + if (IS_ERR(fpga->regmap)) + return PTR_ERR(fpga->regmap); + + ret = upboard_fpga_gpio_init(fpga); + if (ret) { + dev_err(&pdev->dev, + "failed to initialize FPGA common GPIOs: %d", ret); + //return ret; //ignore fpga error + } else { + ret = upboard_fpga_detect_firmware(fpga); + //if (ret) + // return ret; //ignore fpga error + } + + //gpio leds initialize + upboard_led_gpio_init(fpga); + + if (quirks & UPFPGA_QUIRK_GPIO_LED) { + ret = devm_mfd_add_devices(&pdev->dev, UPBOARD_DEVID, + upboard_gpio_led_cells, + ARRAY_SIZE(upboard_gpio_led_cells), + NULL, 0, NULL); + if (ret) { + dev_err(&pdev->dev, "Failed to add GPIO leds"); + return ret; + } + } + return devm_mfd_add_devices(&pdev->dev, UPBOARD_DEVID, + fpga_data->cells, + fpga_data->ncells, + NULL, 0, NULL); +} + +static struct platform_driver upboard_fpga_driver = { + .driver = { + .name = "upboard-fpga", + .acpi_match_table = upboard_fpga_acpi_match, + }, +}; +module_platform_driver_probe(upboard_fpga_driver, upboard_fpga_probe); + +MODULE_AUTHOR("Gary Wang "); +MODULE_AUTHOR("Javier Arteaga "); +MODULE_DESCRIPTION("UP Board FPGA driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/upboard-fpga.h b/include/linux/mfd/upboard-fpga.h new file mode 100644 index 000000000000..48273420b97d --- /dev/null +++ b/include/linux/mfd/upboard-fpga.h @@ -0,0 +1,56 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * UP Board main platform driver and FPGA configuration support + * + * Copyright (c) 2022, Emutex Ltd. All rights reserved. + * + * Author: Javier Arteaga + */ + +#ifndef __LINUX_MFD_UPBOARD_FPGA_H +#define __LINUX_MFD_UPBOARD_FPGA_H + +//fpga/EC protocol version +#define UPFPGA_PROTOCOL_V1_HRV 1 +#define UPFPGA_PROTOCOL_V2_HRV 2 + +#define UPFPGA_ADDRESS_SIZE 7 +#define UPFPGA_REGISTER_SIZE 16 + +#define UPFPGA_READ_FLAG (1 << UPFPGA_ADDRESS_SIZE) + +enum upboard_fpgareg { + UPFPGA_REG_PLATFORM_ID = 0x10, + UPFPGA_REG_FIRMWARE_ID = 0x11, + UPFPGA_REG_FUNC_EN0 = 0x20, + UPFPGA_REG_FUNC_EN1 = 0x21, + UPFPGA_REG_GPIO_EN0 = 0x30, + UPFPGA_REG_GPIO_EN1 = 0x31, + UPFPGA_REG_GPIO_EN2 = 0x32, + UPFPGA_REG_GPIO_DIR0 = 0x40, + UPFPGA_REG_GPIO_DIR1 = 0x41, + UPFPGA_REG_GPIO_DIR2 = 0x42, + UPFPGA_REG_MAX, +}; + +struct upboard_fpga { + struct device *dev; + struct regmap *regmap; + const struct regmap_config *regmapconf; + struct gpio_desc *enable_gpio; + struct gpio_desc *reset_gpio; + struct gpio_desc *clear_gpio; + struct gpio_desc *strobe_gpio; + struct gpio_desc *datain_gpio; + struct gpio_desc *dataout_gpio; + bool uninitialised; +}; + +struct upboard_led_data { + unsigned int bit; + const char *colour; +}; + +bool regmap_check_writeable(struct upboard_fpga *fpga, unsigned int reg); + +#endif /* __LINUX_MFD_UPBOARD_FPGA_H */ From patchwork Wed Nov 9 09:09:56 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "larry.lai" X-Patchwork-Id: 623499 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9E4C1C4321E for ; Wed, 9 Nov 2022 09:13:20 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230088AbiKIJNT (ORCPT ); Wed, 9 Nov 2022 04:13:19 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48868 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230064AbiKIJMq (ORCPT ); Wed, 9 Nov 2022 04:12:46 -0500 Received: from APC01-PSA-obe.outbound.protection.outlook.com (mail-psaapc01on2106.outbound.protection.outlook.com [40.107.255.106]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A28B623BCE; Wed, 9 Nov 2022 01:11:55 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=FEvz6x5ySLywF82NTk+m2bvUqkoMuio1tJfzk9V4ANpwLVm/AGOtiFkDxhqwpG1YMDU1cPh83fyfESYoNqHphjBNCOhafbkrqM14gYwgyij0e6NxYMHPsSb/+JIUhsbwFWwL4/l9eU7lMpDigL4Mfpz53M6+0Hf7In0Z/yva9rX2KBd10RIOLh1UANg3A+53xmzY40xxijCdcsOAo55bPMiTkV7SZkRyahDmpB0sTtim1Wn62j4s3A7HzMvGeGMbq/7gAGhT7Ci3ji6Yp88wH/K00dgln8nUrkJDFMfI2JmCG2IIMaTdsoWe0ZtcSp6pKOSDEiEEPyd/jMCvHSINIw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=hbxXzkATNY3H7ZB8CaoG/zkupOIxMy8sCxNUASfRPhY=; b=T83pQgXL7qhLiAb9PM2kok5JmFA6ubWpCtGnz6IxePBOW8XPpclZMaXkQeajIqM1l0wJ0pkUMKT4brTuSZ0LQInSM+TAjkkjmor9zDLG6BWo8w1XJ7I6RSWvRbufTB+t2oDh4+B3eD4sovSriOvKeQ18FVfdfHiV5V6tejc+jjTbmRdNvtpK6+enaJIYsviDA72RDjIvLV3hXmqIRS4u3ieKxEbMTzaYK8RNkkoKNdVdl1kFFq1jaDSQ/1f+V/8KE5QSwIsTlH7t+RkXHALGm4jRiwWpTg9m48QWNSPgXPJVzL80HY38pmk/ERndhC242FElddhh0XeT3TqYuDGQ3w== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=yunjingtech.com; dmarc=pass action=none header.from=yunjingtech.com; dkim=pass header.d=yunjingtech.com; arc=none Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=yunjingtech.com; Received: from SG2PR06MB3742.apcprd06.prod.outlook.com (2603:1096:4:d8::14) by SI2PR06MB3881.apcprd06.prod.outlook.com (2603:1096:4:fc::6) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.5791.27; Wed, 9 Nov 2022 09:11:51 +0000 Received: from SG2PR06MB3742.apcprd06.prod.outlook.com ([fe80::9ac2:8b0a:9ad:24b5]) by SG2PR06MB3742.apcprd06.prod.outlook.com ([fe80::9ac2:8b0a:9ad:24b5%5]) with mapi id 15.20.5791.027; Wed, 9 Nov 2022 09:11:51 +0000 From: chengwei To: lee@kernel.org, andriy.shevchenko@linux.intel.com, linus.walleij@linaro.org, pavel@ucw.cz Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, linux-leds@vger.kernel.org, GaryWang@aaeon.com.tw, musa.lin@yunjingtech.com, jack.chang@yunjingtech.com, noah.hung@yunjingtech.com, chengwei , Javier Arteaga , Nicola Lunghi Subject: [PATCH V3 2/3] pinctrl: Add support pin control for UP board CPLD/FPGA Date: Wed, 9 Nov 2022 17:09:56 +0800 Message-Id: <20221109090957.13167-3-larry.lai@yunjingtech.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20221109090957.13167-1-larry.lai@yunjingtech.com> References: <20221109090957.13167-1-larry.lai@yunjingtech.com> X-ClientProxiedBy: TYAPR01CA0059.jpnprd01.prod.outlook.com (2603:1096:404:2b::23) To SG2PR06MB3742.apcprd06.prod.outlook.com (2603:1096:4:d8::14) MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: SG2PR06MB3742:EE_|SI2PR06MB3881:EE_ X-MS-Office365-Filtering-Correlation-Id: 1a93307b-2753-4a8a-1891-08dac2327023 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:SG2PR06MB3742.apcprd06.prod.outlook.com; PTR:; CAT:NONE; SFS:(13230022)(136003)(39830400003)(346002)(376002)(366004)(396003)(451199015)(4326008)(86362001)(7416002)(26005)(41300700001)(478600001)(38350700002)(2906002)(38100700002)(36756003)(6512007)(8936002)(2616005)(186003)(1076003)(8676002)(5660300002)(6486002)(54906003)(66476007)(66556008)(316002)(66946007)(52116002)(83380400001)(6506007)(30864003)(43062005)(579004); DIR:OUT; SFP:1102; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: yunjingtech.com X-MS-Exchange-CrossTenant-Network-Message-Id: 1a93307b-2753-4a8a-1891-08dac2327023 X-MS-Exchange-CrossTenant-AuthSource: SG2PR06MB3742.apcprd06.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 09 Nov 2022 09:11:51.4816 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: be2d5505-f7e6-4600-bbe2-b3201c91b344 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: lLrTJa72d1ySz7tK9zSJPsNH4oBE+cCiUqAIQjtMFcPal6SVopvUqhvn5yE29rDLMDxhX7dDiFUeb+yBnqDuMeXArIe+fpbq3NfwjyqFL/o= X-MS-Exchange-Transport-CrossTenantHeadersStamped: SI2PR06MB3881 Precedence: bulk List-ID: X-Mailing-List: linux-leds@vger.kernel.org The UP Squared board implements certain features (pin control) through an on-board FPGA. PATCH V3: There's no change. PATCH V2: (1) Synchronized with upboard github to rc2 (2) Refer 2022/10/19 Mark Brown and Andy Shevchenko review, we removed the regmap and acpi patches and implement in upboard pinctrl driver. (3) Refer 2022/10/19 Andy Shevchenko review, fixed the coding style issues, removed using gpio_xxxx API and removed including . Signed-off-by: Javier Arteaga [merge various fixes] Signed-off-by: Nicola Lunghi Signed-off-by: chengwei --- drivers/pinctrl/Kconfig | 15 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-upboard.c | 1588 +++++++++++++++++++++++++++++ 3 files changed, 1604 insertions(+) create mode 100644 drivers/pinctrl/pinctrl-upboard.c diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 1cf74b0c42e5..5d719eadecdb 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -483,6 +483,21 @@ config PINCTRL_THUNDERBAY rate control and direction control. This module will be called as pinctrl-thunderbay. +config PINCTRL_UPBOARD + tristate "UP board FPGA pin controller" + depends on ACPI + depends on MFD_UPBOARD_FPGA + depends on X86 + select GENERIC_PINCONF + select PINMUX + select PINCONF + help + Pin controller for the FPGA GPIO lines on UP boards. Due to the + hardware layout, these are meant to be controlled in tandem with their + corresponding Intel SoC GPIOs. + To compile this driver as a module, choose M here: the module + will be called pinctrl-upboard. + config PINCTRL_ZYNQ bool "Pinctrl driver for Xilinx Zynq" depends on ARCH_ZYNQ diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index e76f5cdc64b0..c366706d36e7 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_PINCTRL_STMFX) += pinctrl-stmfx.o obj-$(CONFIG_PINCTRL_SX150X) += pinctrl-sx150x.o obj-$(CONFIG_PINCTRL_TB10X) += pinctrl-tb10x.o obj-$(CONFIG_PINCTRL_THUNDERBAY) += pinctrl-thunderbay.o +obj-$(CONFIG_PINCTRL_UPBOARD) += pinctrl-upboard.o obj-$(CONFIG_PINCTRL_ZYNQMP) += pinctrl-zynqmp.o obj-$(CONFIG_PINCTRL_ZYNQ) += pinctrl-zynq.o diff --git a/drivers/pinctrl/pinctrl-upboard.c b/drivers/pinctrl/pinctrl-upboard.c new file mode 100644 index 000000000000..71ed4eba0b6e --- /dev/null +++ b/drivers/pinctrl/pinctrl-upboard.c @@ -0,0 +1,1588 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UP Board FPGA-based pin controller driver + * + * Copyright (c) 2017, Emutex Ltd. All rights reserved. + * + * Authors: Javier Arteaga + * Dan O'Donovan + * Nicola Lunghi + * Gary Wang + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "core.h" + +/* Offset from regs */ +#define REVID 0x000 +#define REVID_SHIFT 16 +#define REVID_MASK GENMASK(31, 16) + +#define CAPLIST 0x004 +#define CAPLIST_ID_SHIFT 16 +#define CAPLIST_ID_MASK GENMASK(23, 16) +#define CAPLIST_ID_GPIO_HW_INFO 1 +#define CAPLIST_ID_PWM 2 +#define CAPLIST_ID_BLINK 3 +#define CAPLIST_ID_EXP 4 +#define CAPLIST_NEXT_SHIFT 0 +#define CAPLIST_NEXT_MASK GENMASK(15, 0) + +#define PADBAR 0x00c + +#define PADOWN_BITS 4 +#define PADOWN_SHIFT(p) ((p) % 8 * PADOWN_BITS) +#define PADOWN_MASK(p) (GENMASK(3, 0) << PADOWN_SHIFT(p)) +#define PADOWN_GPP(p) ((p) / 8) + +/* Offset from pad_regs */ +#define PADCFG0 0x000 +#define PADCFG0_RXEVCFG_SHIFT 25 +#define PADCFG0_RXEVCFG_MASK GENMASK(26, 25) +#define PADCFG0_RXEVCFG_LEVEL 0 +#define PADCFG0_RXEVCFG_EDGE 1 +#define PADCFG0_RXEVCFG_DISABLED 2 +#define PADCFG0_RXEVCFG_EDGE_BOTH 3 +#define PADCFG0_PREGFRXSEL BIT(24) +#define PADCFG0_RXINV BIT(23) +#define PADCFG0_GPIROUTIOXAPIC BIT(20) +#define PADCFG0_GPIROUTSCI BIT(19) +#define PADCFG0_GPIROUTSMI BIT(18) +#define PADCFG0_GPIROUTNMI BIT(17) +#define PADCFG0_PMODE_SHIFT 10 +#define PADCFG0_PMODE_MASK GENMASK(13, 10) +#define PADCFG0_PMODE_GPIO 0 +#define PADCFG0_GPIORXDIS BIT(9) +#define PADCFG0_GPIOTXDIS BIT(8) +#define PADCFG0_GPIORXSTATE BIT(1) +#define PADCFG0_GPIOTXSTATE BIT(0) + +#define PADCFG1 0x004 +#define PADCFG1_TERM_UP BIT(13) +#define PADCFG1_TERM_SHIFT 10 +#define PADCFG1_TERM_MASK GENMASK(12, 10) +#define PADCFG1_TERM_20K BIT(2) +#define PADCFG1_TERM_5K BIT(1) +#define PADCFG1_TERM_1K BIT(0) +#define PADCFG1_TERM_833 (BIT(1) | BIT(0)) + +#define PADCFG2 0x008 +#define PADCFG2_DEBEN BIT(0) +#define PADCFG2_DEBOUNCE_SHIFT 1 +#define PADCFG2_DEBOUNCE_MASK GENMASK(4, 1) + +#define DEBOUNCE_PERIOD_NSEC 31250 + +/* Additional features supported by the hardware */ +#define PINCTRL_FEATURE_DEBOUNCE BIT(0) +#define PINCTRL_FEATURE_1K_PD BIT(1) + +#define pin_to_padno(c, p) ((p) - (c)->pin_base) +#define padgroup_offset(g, p) ((p) - (g)->base) + +struct intel_pinctrl { + struct device *dev; + raw_spinlock_t lock; + struct pinctrl_desc pctldesc; + struct pinctrl_dev *pctldev; + struct gpio_chip chip; + struct irq_chip irqchip; + void *soc; + void *communities; + size_t ncommunities; +}; + +struct upboard_pin { + struct regmap_field *funcbit; + struct regmap_field *enbit; + struct regmap_field *dirbit; + unsigned int gpio; //native pin controller number + unsigned int base; //native pin controller base + int irq; //native pin controller irq + void __iomem *regs; +}; + +struct upboard_bios { + const struct reg_sequence *patches; + size_t npatches; +}; + +struct upboard_pinctrl { + struct gpio_chip chip; + struct device *dev; + struct pinctrl_dev *pctldev; + struct pinctrl_desc *pctldesc; + struct upboard_pin *pins; + struct regmap *regmap; + const unsigned int *rpi_mapping; + int ident; +}; + +enum upboard_func0_fpgabit { + UPFPGA_I2C0_EN = 8, + UPFPGA_I2C1_EN = 9, + UPFPGA_CEC0_EN = 12, + UPFPGA_ADC0_EN = 14, +}; + +static const struct reg_field upboard_i2c0_reg = + REG_FIELD(UPFPGA_REG_FUNC_EN0, UPFPGA_I2C0_EN, UPFPGA_I2C0_EN); + +static const struct reg_field upboard_i2c1_reg = + REG_FIELD(UPFPGA_REG_FUNC_EN0, UPFPGA_I2C1_EN, UPFPGA_I2C1_EN); + +static const struct reg_field upboard_adc0_reg = + REG_FIELD(UPFPGA_REG_FUNC_EN0, UPFPGA_ADC0_EN, UPFPGA_ADC0_EN); + +/* Pin group information */ +struct upboard_pingroup { + const char *name; + const unsigned int *pins; + size_t npins; +}; + +/* Pin function information */ +struct upboard_function { + const char *name; + const char * const *groups; + size_t ngroups; +}; + +#define UPBOARD_BIT_TO_PIN(r, bit) \ + ((r) * UPFPGA_REGISTER_SIZE + (bit)) + +/* + * UP board data + */ + +#define UPBOARD_UP_BIT_TO_PIN(r, id) (UPBOARD_BIT_TO_PIN(r, UPFPGA_UP_##id)) + +#define UPBOARD_UP_PIN_ANON(r, bit) \ + { \ + .number = UPBOARD_BIT_TO_PIN(r, bit), \ + } + +#define UPBOARD_UP_PIN_NAME(r, id) \ + { \ + .number = UPBOARD_UP_BIT_TO_PIN(r, id), \ + .name = #id, \ + } + +#define UPBOARD_UP_PIN_FUNC(r, id, data) \ + { \ + .number = UPBOARD_UP_BIT_TO_PIN(r, id), \ + .name = #id, \ + .drv_data = (void *)(data), \ + } + +#define PIN_GROUP(n, p) \ + { \ + .name = (n), \ + .pins = (p), \ + .npins = ARRAY_SIZE((p)), \ + } + +#define FUNCTION(n, g) \ + { \ + .name = (n), \ + .groups = (g), \ + .ngroups = ARRAY_SIZE((g)), \ + } + +enum upboard_up_reg1_fpgabit { + UPFPGA_UP_I2C1_SDA, + UPFPGA_UP_I2C1_SCL, + UPFPGA_UP_ADC0, + UPFPGA_UP_GPIO17, + UPFPGA_UP_GPIO27, + UPFPGA_UP_GPIO22, + UPFPGA_UP_SPI_MOSI, + UPFPGA_UP_SPI_MISO, + UPFPGA_UP_SPI_CLK, + UPFPGA_UP_I2C0_SDA, + UPFPGA_UP_GPIO5, + UPFPGA_UP_GPIO6, + UPFPGA_UP_PWM1, + UPFPGA_UP_I2S_FRM, + UPFPGA_UP_GPIO26, + UPFPGA_UP_UART1_TX, +}; + +enum upboard_up_reg2_fpgabit { + UPFPGA_UP_UART1_RX, + UPFPGA_UP_I2S_CLK, + UPFPGA_UP_GPIO23, + UPFPGA_UP_GPIO24, + UPFPGA_UP_GPIO25, + UPFPGA_UP_SPI_CS0, + UPFPGA_UP_SPI_CS1, + UPFPGA_UP_I2C0_SCL, + UPFPGA_UP_PWM0, + UPFPGA_UP_GPIO16, + UPFPGA_UP_I2S_DIN, + UPFPGA_UP_I2S_DOUT, +}; + +#define UPFPGA_UP_UART1_RTS UPFPGA_UP_GPIO17 +#define UPFPGA_UP_UART1_CTS UPFPGA_UP_GPIO16 + +static struct pinctrl_pin_desc upboard_up_pins[] = { + UPBOARD_UP_PIN_FUNC(0, I2C1_SDA, &upboard_i2c1_reg), + UPBOARD_UP_PIN_FUNC(0, I2C1_SCL, &upboard_i2c1_reg), + UPBOARD_UP_PIN_FUNC(0, ADC0, &upboard_adc0_reg), + UPBOARD_UP_PIN_NAME(0, UART1_RTS), + UPBOARD_UP_PIN_NAME(0, GPIO27), + UPBOARD_UP_PIN_NAME(0, GPIO22), + UPBOARD_UP_PIN_NAME(0, SPI_MOSI), + UPBOARD_UP_PIN_NAME(0, SPI_MISO), + UPBOARD_UP_PIN_NAME(0, SPI_CLK), + UPBOARD_UP_PIN_FUNC(0, I2C0_SDA, &upboard_i2c0_reg), + UPBOARD_UP_PIN_NAME(0, GPIO5), + UPBOARD_UP_PIN_NAME(0, GPIO6), + UPBOARD_UP_PIN_NAME(0, PWM1), + UPBOARD_UP_PIN_NAME(0, I2S_FRM), + UPBOARD_UP_PIN_NAME(0, GPIO26), + UPBOARD_UP_PIN_NAME(0, UART1_TX), + /* register 1 */ + UPBOARD_UP_PIN_NAME(1, UART1_RX), + UPBOARD_UP_PIN_NAME(1, I2S_CLK), + UPBOARD_UP_PIN_NAME(1, GPIO23), + UPBOARD_UP_PIN_NAME(1, GPIO24), + UPBOARD_UP_PIN_NAME(1, GPIO25), + UPBOARD_UP_PIN_NAME(1, SPI_CS0), + UPBOARD_UP_PIN_NAME(1, SPI_CS1), + UPBOARD_UP_PIN_FUNC(1, I2C0_SCL, &upboard_i2c0_reg), + UPBOARD_UP_PIN_NAME(1, PWM0), + UPBOARD_UP_PIN_NAME(1, UART1_CTS), + UPBOARD_UP_PIN_NAME(1, I2S_DIN), + UPBOARD_UP_PIN_NAME(1, I2S_DOUT), +}; + +static const unsigned int upboard_up_rpi_mapping[] = { + UPBOARD_UP_BIT_TO_PIN(0, I2C0_SDA), + UPBOARD_UP_BIT_TO_PIN(1, I2C0_SCL), + UPBOARD_UP_BIT_TO_PIN(0, I2C1_SDA), + UPBOARD_UP_BIT_TO_PIN(0, I2C1_SCL), + UPBOARD_UP_BIT_TO_PIN(0, ADC0), + UPBOARD_UP_BIT_TO_PIN(0, GPIO5), + UPBOARD_UP_BIT_TO_PIN(0, GPIO6), + UPBOARD_UP_BIT_TO_PIN(1, SPI_CS1), + UPBOARD_UP_BIT_TO_PIN(1, SPI_CS0), + UPBOARD_UP_BIT_TO_PIN(0, SPI_MISO), + UPBOARD_UP_BIT_TO_PIN(0, SPI_MOSI), + UPBOARD_UP_BIT_TO_PIN(0, SPI_CLK), + UPBOARD_UP_BIT_TO_PIN(1, PWM0), + UPBOARD_UP_BIT_TO_PIN(0, PWM1), + UPBOARD_UP_BIT_TO_PIN(0, UART1_TX), + UPBOARD_UP_BIT_TO_PIN(1, UART1_RX), + UPBOARD_UP_BIT_TO_PIN(1, GPIO16), + UPBOARD_UP_BIT_TO_PIN(0, GPIO17), + UPBOARD_UP_BIT_TO_PIN(1, I2S_CLK), + UPBOARD_UP_BIT_TO_PIN(0, I2S_FRM), + UPBOARD_UP_BIT_TO_PIN(1, I2S_DIN), + UPBOARD_UP_BIT_TO_PIN(1, I2S_DOUT), + UPBOARD_UP_BIT_TO_PIN(0, GPIO22), + UPBOARD_UP_BIT_TO_PIN(1, GPIO23), + UPBOARD_UP_BIT_TO_PIN(1, GPIO24), + UPBOARD_UP_BIT_TO_PIN(1, GPIO25), + UPBOARD_UP_BIT_TO_PIN(0, GPIO26), + UPBOARD_UP_BIT_TO_PIN(0, GPIO27), +}; + +static const unsigned int uart1_pins[] = { 14, 15, 16, 17 }; +static const unsigned int uart2_pins[] = { 25, 27 }; +static const unsigned int i2c0_pins[] = { 0, 1 }; +static const unsigned int i2c1_pins[] = { 2, 3 }; +static const unsigned int spi2_pins[] = { 8, 9, 10, 11 }; +static const unsigned int i2s0_pins[] = { 18, 19, 20, 21 }; +static const unsigned int pwm0_pins[] = { 12 }; +static const unsigned int pwm1_pins[] = { 13 }; +static const unsigned int adc0_pins[] = { 4 }; + +static const struct upboard_pingroup pin_groups[] = { + PIN_GROUP("uart1_grp", uart1_pins), + PIN_GROUP("uart2_grp", uart2_pins), + PIN_GROUP("i2c0_grp", i2c0_pins), + PIN_GROUP("i2c1_grp", i2c1_pins), + PIN_GROUP("spi2_grp", spi2_pins), + PIN_GROUP("i2s0_grp", i2s0_pins), + PIN_GROUP("pwm0_grp", pwm0_pins), + PIN_GROUP("pwm1_grp", pwm1_pins), + PIN_GROUP("adc0_grp", adc0_pins), +}; + +static const char * const uart1_groups[] = { "uart1_grp" }; +static const char * const uart2_groups[] = { "uart2_grp" }; +static const char * const i2c0_groups[] = { "i2c0_grp" }; +static const char * const i2c1_groups[] = { "i2c1_grp" }; +static const char * const spi2_groups[] = { "spi2_grp" }; +static const char * const i2s0_groups[] = { "i2s0_grp" }; +static const char * const pwm0_groups[] = { "pwm0_grp" }; +static const char * const pwm1_groups[] = { "pwm1_grp" }; +static const char * const adc0_groups[] = { "adc0_grp" }; + +static const struct upboard_function pin_functions[] = { + FUNCTION("uart1", uart1_groups), + FUNCTION("uart2", uart2_groups), + FUNCTION("i2c0", i2c0_groups), + FUNCTION("i2c1", i2c1_groups), + FUNCTION("spi2", spi2_groups), + FUNCTION("i2s0", i2s0_groups), + FUNCTION("pwm0", pwm0_groups), + FUNCTION("pwm1", pwm1_groups), + FUNCTION("adc0", adc0_groups), +}; + + +/* + * Init patches applied to the registers until the BIOS sets proper defaults + */ +static const struct reg_sequence upboard_up_reg_patches[] __initconst = { + { UPFPGA_REG_FUNC_EN0, + // enable I2C voltage-level shifters + BIT(UPFPGA_I2C0_EN) | + BIT(UPFPGA_I2C1_EN) | + // enable adc + BIT(UPFPGA_ADC0_EN) + }, + /* HAT function pins initially set as inputs */ + { UPFPGA_REG_GPIO_DIR0, + BIT(UPFPGA_UP_I2C1_SDA) | + BIT(UPFPGA_UP_I2C1_SCL) | + BIT(UPFPGA_UP_ADC0) | + BIT(UPFPGA_UP_GPIO27) | + BIT(UPFPGA_UP_GPIO22) | + BIT(UPFPGA_UP_SPI_MISO) | + BIT(UPFPGA_UP_I2C0_SDA) | + BIT(UPFPGA_UP_GPIO5) | + BIT(UPFPGA_UP_GPIO6) | + BIT(UPFPGA_UP_GPIO26) + }, + { UPFPGA_REG_GPIO_DIR1, + BIT(UPFPGA_UP_UART1_RX) | + BIT(UPFPGA_UP_GPIO23) | + BIT(UPFPGA_UP_GPIO24) | + BIT(UPFPGA_UP_GPIO25) | + BIT(UPFPGA_UP_I2C0_SCL) | + BIT(UPFPGA_UP_GPIO16) | + BIT(UPFPGA_UP_I2S_DIN) + }, +}; + +static const struct upboard_bios upboard_up_bios_info_dvt __initconst = { + .patches = upboard_up_reg_patches, + .npatches = ARRAY_SIZE(upboard_up_reg_patches), +}; + +/* + * UP^2 board data + */ + +#define UPBOARD_UP2_BIT_TO_PIN(r, id) (UPBOARD_BIT_TO_PIN(r, UPFPGA_UP2_##id)) + +#define UPBOARD_UP2_PIN_ANON(r, bit) \ + { \ + .number = UPBOARD_BIT_TO_PIN(r, bit), \ + .name = "NONAME", \ + } + +#define UPBOARD_UP2_PIN_NAME(r, id) \ + { \ + .number = UPBOARD_UP2_BIT_TO_PIN(r, id), \ + .name = #id, \ + } + +#define UPBOARD_UP2_PIN_FUNC(r, id, data) \ + { \ + .number = UPBOARD_UP2_BIT_TO_PIN(r, id), \ + .name = #id, \ + .drv_data = (void *)(data), \ + } + +enum upboard_up2_reg0_fpgabit { + UPFPGA_UP2_UART1_TXD, + UPFPGA_UP2_UART1_RXD, + UPFPGA_UP2_UART1_RTS, + UPFPGA_UP2_UART1_CTS, + UPFPGA_UP2_GPIO3, + UPFPGA_UP2_GPIO5, + UPFPGA_UP2_GPIO6, + UPFPGA_UP2_GPIO11, + UPFPGA_UP2_EXHAT_LVDS1n, + UPFPGA_UP2_EXHAT_LVDS1p, + UPFPGA_UP2_SPI2_TXD, + UPFPGA_UP2_SPI2_RXD, + UPFPGA_UP2_SPI2_FS1, + UPFPGA_UP2_SPI2_FS0, + UPFPGA_UP2_SPI2_CLK, + UPFPGA_UP2_SPI1_TXD, +}; + +enum upboard_up2_reg1_fpgabit { + UPFPGA_UP2_SPI1_RXD, + UPFPGA_UP2_SPI1_FS1, + UPFPGA_UP2_SPI1_FS0, + UPFPGA_UP2_SPI1_CLK, + UPFPGA_UP2_BIT20, + UPFPGA_UP2_BIT21, + UPFPGA_UP2_BIT22, + UPFPGA_UP2_BIT23, + UPFPGA_UP2_PWM1, + UPFPGA_UP2_PWM0, + UPFPGA_UP2_EXHAT_LVDS0n, + UPFPGA_UP2_EXHAT_LVDS0p, + UPFPGA_UP2_I2C0_SCL, + UPFPGA_UP2_I2C0_SDA, + UPFPGA_UP2_I2C1_SCL, + UPFPGA_UP2_I2C1_SDA, +}; + +enum upboard_up2_reg2_fpgabit { + UPFPGA_UP2_EXHAT_LVDS3n, + UPFPGA_UP2_EXHAT_LVDS3p, + UPFPGA_UP2_EXHAT_LVDS4n, + UPFPGA_UP2_EXHAT_LVDS4p, + UPFPGA_UP2_EXHAT_LVDS5n, + UPFPGA_UP2_EXHAT_LVDS5p, + UPFPGA_UP2_I2S_SDO, + UPFPGA_UP2_I2S_SDI, + UPFPGA_UP2_I2S_WS_SYNC, + UPFPGA_UP2_I2S_BCLK, + UPFPGA_UP2_EXHAT_LVDS6n, + UPFPGA_UP2_EXHAT_LVDS6p, + UPFPGA_UP2_EXHAT_LVDS7n, + UPFPGA_UP2_EXHAT_LVDS7p, + UPFPGA_UP2_EXHAT_LVDS2n, + UPFPGA_UP2_EXHAT_LVDS2p, +}; + +static struct pinctrl_pin_desc upboard_up2_pins[] = { + UPBOARD_UP2_PIN_NAME(0, UART1_TXD), + UPBOARD_UP2_PIN_NAME(0, UART1_RXD), + UPBOARD_UP2_PIN_NAME(0, UART1_RTS), + UPBOARD_UP2_PIN_NAME(0, UART1_CTS), + UPBOARD_UP2_PIN_NAME(0, GPIO3), + UPBOARD_UP2_PIN_NAME(0, GPIO5), + UPBOARD_UP2_PIN_NAME(0, GPIO6), + UPBOARD_UP2_PIN_NAME(0, GPIO11), + UPBOARD_UP2_PIN_NAME(0, EXHAT_LVDS1n), + UPBOARD_UP2_PIN_NAME(0, EXHAT_LVDS1p), + UPBOARD_UP2_PIN_NAME(0, SPI2_TXD), + UPBOARD_UP2_PIN_NAME(0, SPI2_RXD), + UPBOARD_UP2_PIN_NAME(0, SPI2_FS1), + UPBOARD_UP2_PIN_NAME(0, SPI2_FS0), + UPBOARD_UP2_PIN_NAME(0, SPI2_CLK), + UPBOARD_UP2_PIN_NAME(0, SPI1_TXD), + UPBOARD_UP2_PIN_NAME(1, SPI1_RXD), + UPBOARD_UP2_PIN_NAME(1, SPI1_FS1), + UPBOARD_UP2_PIN_NAME(1, SPI1_FS0), + UPBOARD_UP2_PIN_NAME(1, SPI1_CLK), + UPBOARD_UP2_PIN_ANON(1, 4), + UPBOARD_UP2_PIN_ANON(1, 5), + UPBOARD_UP2_PIN_ANON(1, 6), + UPBOARD_UP2_PIN_ANON(1, 7), + UPBOARD_UP2_PIN_NAME(1, PWM1), + UPBOARD_UP2_PIN_NAME(1, PWM0), + UPBOARD_UP2_PIN_NAME(1, EXHAT_LVDS0n), + UPBOARD_UP2_PIN_NAME(1, EXHAT_LVDS0p), + UPBOARD_UP2_PIN_FUNC(1, I2C0_SCL, &upboard_i2c0_reg), + UPBOARD_UP2_PIN_FUNC(1, I2C0_SDA, &upboard_i2c0_reg), + UPBOARD_UP2_PIN_FUNC(1, I2C1_SCL, &upboard_i2c1_reg), + UPBOARD_UP2_PIN_FUNC(1, I2C1_SDA, &upboard_i2c1_reg), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS3n), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS3p), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS4n), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS4p), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS5n), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS5p), + UPBOARD_UP2_PIN_NAME(2, I2S_SDO), + UPBOARD_UP2_PIN_NAME(2, I2S_SDI), + UPBOARD_UP2_PIN_NAME(2, I2S_WS_SYNC), + UPBOARD_UP2_PIN_NAME(2, I2S_BCLK), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS6n), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS6p), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS7n), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS7p), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS2n), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS2p), +}; + +static const unsigned int upboard_up2_rpi_mapping[] = { + UPBOARD_UP2_BIT_TO_PIN(1, I2C0_SDA), + UPBOARD_UP2_BIT_TO_PIN(1, I2C0_SCL), + UPBOARD_UP2_BIT_TO_PIN(1, I2C1_SDA), + UPBOARD_UP2_BIT_TO_PIN(1, I2C1_SCL), + UPBOARD_UP2_BIT_TO_PIN(0, GPIO3), + UPBOARD_UP2_BIT_TO_PIN(0, GPIO11), + UPBOARD_UP2_BIT_TO_PIN(0, SPI2_CLK), + UPBOARD_UP2_BIT_TO_PIN(1, SPI1_FS1), + UPBOARD_UP2_BIT_TO_PIN(1, SPI1_FS0), + UPBOARD_UP2_BIT_TO_PIN(1, SPI1_RXD), + UPBOARD_UP2_BIT_TO_PIN(0, SPI1_TXD), + UPBOARD_UP2_BIT_TO_PIN(1, SPI1_CLK), + UPBOARD_UP2_BIT_TO_PIN(1, PWM0), + UPBOARD_UP2_BIT_TO_PIN(1, PWM1), + UPBOARD_UP2_BIT_TO_PIN(0, UART1_TXD), + UPBOARD_UP2_BIT_TO_PIN(0, UART1_RXD), + UPBOARD_UP2_BIT_TO_PIN(0, UART1_CTS), + UPBOARD_UP2_BIT_TO_PIN(0, UART1_RTS), + UPBOARD_UP2_BIT_TO_PIN(2, I2S_BCLK), + UPBOARD_UP2_BIT_TO_PIN(2, I2S_WS_SYNC), + UPBOARD_UP2_BIT_TO_PIN(2, I2S_SDI), + UPBOARD_UP2_BIT_TO_PIN(2, I2S_SDO), + UPBOARD_UP2_BIT_TO_PIN(0, GPIO6), + UPBOARD_UP2_BIT_TO_PIN(0, SPI2_FS1), + UPBOARD_UP2_BIT_TO_PIN(0, SPI2_RXD), + UPBOARD_UP2_BIT_TO_PIN(0, SPI2_TXD), + UPBOARD_UP2_BIT_TO_PIN(0, SPI2_FS0), + UPBOARD_UP2_BIT_TO_PIN(0, GPIO5), +}; + +/* + * Init patches applied to the registers until the BIOS sets proper defaults + */ +static const struct reg_sequence upboard_up2_reg_patches[] __initconst = { + // enable I2C voltage-level shifters + { UPFPGA_REG_FUNC_EN0, + BIT(UPFPGA_I2C0_EN) | + BIT(UPFPGA_I2C1_EN) + }, + // HAT function pins initially set as inputs + { UPFPGA_REG_GPIO_DIR0, + BIT(UPFPGA_UP2_UART1_RXD) | + BIT(UPFPGA_UP2_UART1_CTS) + }, + { UPFPGA_REG_GPIO_DIR1, + BIT(UPFPGA_UP2_SPI1_RXD) + }, + // HAT function pins initially enabled (i.e. not hi-Z) + { UPFPGA_REG_GPIO_EN0, + BIT(UPFPGA_UP2_UART1_TXD) | + BIT(UPFPGA_UP2_UART1_RXD) | + BIT(UPFPGA_UP2_UART1_RTS) | + BIT(UPFPGA_UP2_UART1_CTS) | + BIT(UPFPGA_UP2_SPI1_TXD) + }, + { UPFPGA_REG_GPIO_EN1, + BIT(UPFPGA_UP2_SPI1_RXD) | + BIT(UPFPGA_UP2_SPI1_FS1) | + BIT(UPFPGA_UP2_SPI1_FS0) | + BIT(UPFPGA_UP2_SPI1_CLK) | + BIT(UPFPGA_UP2_PWM1) | + BIT(UPFPGA_UP2_PWM0) + }, +}; + +static const struct upboard_bios upboard_up2_bios_info_v0_3 __initconst = { + .patches = upboard_up2_reg_patches, + .npatches = ARRAY_SIZE(upboard_up2_reg_patches), +}; + +/* + * UP Core board + CREX carrier board data + */ + +#define UPBOARD_UPCORE_CREX_BIT_TO_PIN(r, id) \ + (UPBOARD_BIT_TO_PIN(r, UPFPGA_UPCORE_CREX_##id)) + +#define UPBOARD_UPCORE_CREX_PIN_ANON(r, bit) \ + { \ + .number = UPBOARD_BIT_TO_PIN(r, bit), \ + } + +#define UPBOARD_UPCORE_CREX_PIN_NAME(r, id) \ + { \ + .number = UPBOARD_UPCORE_CREX_BIT_TO_PIN(r, id), \ + .name = #id, \ + } + +#define UPBOARD_UPCORE_CREX_PIN_FUNC(r, id, data) \ + { \ + .number = UPBOARD_UPCORE_CREX_BIT_TO_PIN(r, id), \ + .name = #id, \ + .drv_data = (void *)(data), \ + } + +enum upboard_upcore_crex_reg1_fpgabit { + UPFPGA_UPCORE_CREX_I2C0_SDA, + UPFPGA_UPCORE_CREX_I2C0_SCL, + UPFPGA_UPCORE_CREX_I2C1_SDA, + UPFPGA_UPCORE_CREX_I2C1_SCL, + UPFPGA_UPCORE_CREX_SPI2_CS0, + UPFPGA_UPCORE_CREX_SPI2_CS1, + UPFPGA_UPCORE_CREX_SPI2_MOSI, + UPFPGA_UPCORE_CREX_SPI2_MISO, + UPFPGA_UPCORE_CREX_SPI2_CLK, + UPFPGA_UPCORE_CREX_UART1_TXD, + UPFPGA_UPCORE_CREX_UART1_RXD, + UPFPGA_UPCORE_CREX_PWM0, + UPFPGA_UPCORE_CREX_PWM1, + UPFPGA_UPCORE_CREX_I2S2_FRM, + UPFPGA_UPCORE_CREX_I2S2_CLK, + UPFPGA_UPCORE_CREX_I2S2_RX, +}; + +enum upboard_upcore_crex_reg2_fpgabit { + UPFPGA_UPCORE_CREX_I2S2_TX, + UPFPGA_UPCORE_CREX_GPIO0, + UPFPGA_UPCORE_CREX_GPIO2, + UPFPGA_UPCORE_CREX_GPIO3, + UPFPGA_UPCORE_CREX_GPIO4, + UPFPGA_UPCORE_CREX_GPIO9, +}; + +static struct pinctrl_pin_desc upboard_upcore_crex_pins[] = { + UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C0_SDA, &upboard_i2c0_reg), + UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C0_SCL, &upboard_i2c0_reg), + UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C1_SDA, &upboard_i2c1_reg), + UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C1_SCL, &upboard_i2c1_reg), + UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_CS0), + UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_CS1), + UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_MOSI), + UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_MISO), + UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_CLK), + UPBOARD_UPCORE_CREX_PIN_NAME(0, UART1_TXD), + UPBOARD_UPCORE_CREX_PIN_NAME(0, UART1_RXD), + UPBOARD_UPCORE_CREX_PIN_NAME(0, PWM0), + UPBOARD_UPCORE_CREX_PIN_NAME(0, PWM1), + UPBOARD_UPCORE_CREX_PIN_NAME(0, I2S2_FRM), + UPBOARD_UPCORE_CREX_PIN_NAME(0, I2S2_CLK), + UPBOARD_UPCORE_CREX_PIN_NAME(0, I2S2_RX), + /* register 1 */ + UPBOARD_UPCORE_CREX_PIN_NAME(1, I2S2_TX), + UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO0), + UPBOARD_UPCORE_CREX_PIN_FUNC(1, GPIO2, &upboard_adc0_reg), + UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO3), + UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO4), + UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO9), +}; + +static unsigned int upboard_upcore_crex_rpi_mapping[] = { + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C0_SDA), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C0_SCL), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C1_SDA), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C1_SCL), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO0), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO2), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO3), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_CS1), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_CS0), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_MISO), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_MOSI), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_CLK), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, PWM0), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, PWM1), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, UART1_TXD), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, UART1_RXD), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO9), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO4), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2S2_CLK), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2S2_FRM), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2S2_RX), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, I2S2_TX), +}; + +/* + * Init patches applied to the registers until the BIOS sets proper defaults + */ +static const struct reg_sequence upboard_upcore_crex_reg_patches[] __initconst = { + // enable I2C voltage-level shifters + { UPFPGA_REG_FUNC_EN0, + BIT(UPFPGA_I2C0_EN) | + BIT(UPFPGA_I2C1_EN) + }, + // HAT function pins initially set as inputs + { UPFPGA_REG_GPIO_DIR0, + BIT(UPFPGA_UPCORE_CREX_SPI2_MISO) | + BIT(UPFPGA_UPCORE_CREX_UART1_RXD) | + BIT(UPFPGA_UPCORE_CREX_I2S2_FRM) | + BIT(UPFPGA_UPCORE_CREX_I2S2_CLK) | + BIT(UPFPGA_UPCORE_CREX_I2S2_RX) + }, +}; + +static const struct upboard_bios upboard_upcore_crex_bios_info __initconst = { + .patches = upboard_upcore_crex_reg_patches, + .npatches = ARRAY_SIZE(upboard_upcore_crex_reg_patches), +}; + +/* + * UP Core board + CRST02 carrier board data + */ + +#define upboard_upcore_crst02_pins upboard_upcore_crex_pins +#define upboard_upcore_crst02_rpi_mapping upboard_upcore_crex_rpi_mapping + +/* + * Init patches applied to the registers until the BIOS sets proper defaults + */ +static const struct reg_sequence upboard_upcore_crst02_reg_patches[] __initconst = { + // enable I2C voltage-level shifters + { UPFPGA_REG_FUNC_EN0, + BIT(UPFPGA_I2C0_EN) | + BIT(UPFPGA_I2C1_EN) + }, + // HAT function pins initially set as inputs + { UPFPGA_REG_GPIO_DIR0, + BIT(UPFPGA_UPCORE_CREX_SPI2_MISO) | + BIT(UPFPGA_UPCORE_CREX_UART1_RXD) | + BIT(UPFPGA_UPCORE_CREX_I2S2_FRM) | + BIT(UPFPGA_UPCORE_CREX_I2S2_CLK) | + BIT(UPFPGA_UPCORE_CREX_I2S2_RX) + }, + // HAT function pins initially enabled (i.e. not hi-Z) + { UPFPGA_REG_GPIO_EN0, + BIT(UPFPGA_UPCORE_CREX_SPI2_CS0) | + BIT(UPFPGA_UPCORE_CREX_SPI2_MOSI) | + BIT(UPFPGA_UPCORE_CREX_SPI2_MISO) | + BIT(UPFPGA_UPCORE_CREX_SPI2_CLK) | + BIT(UPFPGA_UPCORE_CREX_UART1_TXD) | + BIT(UPFPGA_UPCORE_CREX_UART1_RXD) | + BIT(UPFPGA_UPCORE_CREX_PWM0) | + BIT(UPFPGA_UPCORE_CREX_PWM1) | + BIT(UPFPGA_UPCORE_CREX_I2S2_FRM) | + BIT(UPFPGA_UPCORE_CREX_I2S2_CLK) | + BIT(UPFPGA_UPCORE_CREX_I2S2_RX) + }, + { UPFPGA_REG_GPIO_EN1, + BIT(UPFPGA_UPCORE_CREX_I2S2_TX) + }, +}; + +static const struct upboard_bios upboard_upcore_crst02_bios_info __initconst = { + .patches = upboard_upcore_crst02_reg_patches, + .npatches = ARRAY_SIZE(upboard_upcore_crst02_reg_patches), +}; + +static int upboard_set_mux(struct pinctrl_dev *pctldev, unsigned int function, + unsigned int group) +{ + return 0; +}; + +static int upboard_fpga_request_enable(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int pin) +{ + const struct pin_desc * const pd = pin_desc_get(pctldev, pin); + const struct upboard_pin *p; + int ret; + + if (!pd) + return -EINVAL; + + p = pd->drv_data; + if (p->funcbit) { + ret = regmap_field_write(p->funcbit, 0); + if (ret) + return ret; + } + + if (p->enbit) { + ret = regmap_field_write(p->enbit, 1); + if (ret) + return ret; + } + + return 0; +}; + +static int upboard_fpga_request_free(struct pinctrl_dev *pctldev, + unsigned int pin) +{ + const struct pin_desc * const pd = pin_desc_get(pctldev, pin); + const struct upboard_pin *p; + int ret; + + if (!pd) + return -EINVAL; + + p = pd->drv_data; + if (p->funcbit) { + ret = regmap_field_write(p->funcbit, 1); + if (ret) + return ret; + } + + if (p->enbit) { + ret = regmap_field_write(p->enbit, 0); + if (ret) + return ret; + } + + return 0; +}; + +static int upboard_fpga_set_direction(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int pin, bool input) +{ + const struct pin_desc * const pd = pin_desc_get(pctldev, pin); + const struct upboard_pin *p; + + if (!pd) + return -EINVAL; + + p = pd->drv_data; + upboard_fpga_request_enable(pctldev, range, pin); + + return regmap_field_write(p->dirbit, input); +}; + +static int upboard_get_functions_count(struct pinctrl_dev *pctldev) +{ + //dev_info(pctldev->dev,"upboard_get_functions_count"); + return 0; +} + +static const char *upboard_get_function_name(struct pinctrl_dev *pctldev, + unsigned int selector) +{ + //dev_info(pctldev->dev,"upboard_get_function_name:%d",selector); + return NULL; +} + +static int upboard_get_function_groups(struct pinctrl_dev *pctldev, + unsigned int selector, + const char * const **groups, + unsigned int *num_groups) +{ + *groups = NULL; + *num_groups = 0; + return 0; +} + +static const struct pinmux_ops upboard_pinmux_ops = { + .get_functions_count = upboard_get_functions_count, + .get_function_groups = upboard_get_function_groups, + .get_function_name = upboard_get_function_name, + .set_mux = upboard_set_mux, + .gpio_request_enable = upboard_fpga_request_enable, + .gpio_set_direction = upboard_fpga_set_direction, +}; + +static int upboard_get_groups_count(struct pinctrl_dev *pctldev) +{ + return 0; +} + +static const char *upboard_get_group_name(struct pinctrl_dev *pctldev, + unsigned int selector) +{ + return NULL; +} + +static const struct pinctrl_ops upboard_pinctrl_ops = { + .get_groups_count = upboard_get_groups_count, + .get_group_name = upboard_get_group_name, +}; + +static struct pinctrl_desc upboard_up_pinctrl_desc = { + .pins = upboard_up_pins, + .npins = ARRAY_SIZE(upboard_up_pins), + .pctlops = &upboard_pinctrl_ops, + .pmxops = &upboard_pinmux_ops, + .owner = THIS_MODULE, +}; + +static struct pinctrl_desc upboard_up2_pinctrl_desc = { + .pins = upboard_up2_pins, + .npins = ARRAY_SIZE(upboard_up2_pins), + .pctlops = &upboard_pinctrl_ops, + .pmxops = &upboard_pinmux_ops, + .owner = THIS_MODULE, +}; + +static struct pinctrl_desc upboard_upcore_crex_pinctrl_desc = { + .pins = upboard_upcore_crex_pins, + .npins = ARRAY_SIZE(upboard_upcore_crex_pins), + .pctlops = &upboard_pinctrl_ops, + .pmxops = &upboard_pinmux_ops, + .owner = THIS_MODULE, +}; + +static struct pinctrl_desc upboard_upcore_crst02_pinctrl_desc = { + .pins = upboard_upcore_crst02_pins, + .npins = ARRAY_SIZE(upboard_upcore_crst02_pins), + .pctlops = &upboard_pinctrl_ops, + .pmxops = &upboard_pinmux_ops, + .owner = THIS_MODULE, +}; + +static void upboard_alt_func_enable(struct gpio_chip *gc, const char *name) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + int offset[gc->ngpio]; + int i, j, cnt; + bool input = false; + + //find all pins + for (i = 0, cnt = 0; i < pctrl->pctldesc->npins; i++) { + if (strstr(pctrl->pctldesc->pins[i].name, name)) + offset[cnt++] = i; + } + for (i = 0; i < cnt; i++) { + if (pinctrl_gpio_request(pctrl->pins[offset[i]].gpio) == -EBUSY) + return; //used + pinctrl_gpio_free(pctrl->pins[offset[i]].gpio); + } + //change to alternate function + for (i = 0; i < cnt; i++) { + if (pctrl->pins[offset[i]].regs == NULL) + continue; + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "I2C")) { + int mode = 1; + unsigned int val; + + switch (pctrl->ident) { + case 15: + mode = 2; + break; + } + + val = readl(pctrl->pins[offset[i]].regs) | + mode<pins[offset[i]].regs); + upboard_fpga_request_free(pctrl->pctldev, offset[i]); + continue; + } else if (strstr(pctrl->pctldesc->pins[offset[i]].name, + "UART")) { + int mode = 1; + unsigned int val; + + switch (pctrl->ident) { + case 13: + case 14: + mode = 4; + break; + case 15: + mode = 2; + break; + } + + val = readl(pctrl->pins[offset[i]].regs) | + mode<pins[offset[i]].regs); + } else if (strstr(pctrl->pctldesc->pins[offset[i]].name, + "SPI")) { + int mode = 1; + unsigned int val; + + switch (pctrl->ident) { + case 15: + mode = 7; + break; + } + + val = readl(pctrl->pins[offset[i]].regs) | + mode<pins[offset[i]].regs); + } else if (strstr(pctrl->pctldesc->pins[offset[i]].name, + "I2S")) { + int mode = 1; + unsigned int val; + + switch (pctrl->ident) { + case 15: + mode = 4; + break; + } + + val = readl(pctrl->pins[offset[i]].regs) | + mode<pins[offset[i]].regs); + } else { + unsigned int val; + + val = readl(pctrl->pins[offset[i]].regs) | + 1<pins[offset[i]].regs); + } + + //input pins + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "RX")) + input = true; + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "CTS")) + input = true; + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "ADC")) + input = true; + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "MISO")) + input = true; + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "DIN")) + input = true; + upboard_fpga_set_direction(pctrl->pctldev, NULL, offset[i], + input); + } +} + +static int upboard_rpi_to_native_gpio(struct gpio_chip *gc, unsigned int gpio) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int pin = pctrl->rpi_mapping[gpio]; + struct pinctrl_gpio_range *range; + + range = pinctrl_find_gpio_range_from_pin(pctrl->pctldev, pin); + if (!range) + return -ENODEV; + + return range->base; +} + +static int upboard_gpio_request(struct gpio_chip *gc, unsigned int offset) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + int gpio = upboard_rpi_to_native_gpio(gc, offset); + + if (gpio < 0) + return gpio; + + return pinctrl_gpio_request(gpio); +} + +static void upboard_gpio_free(struct gpio_chip *gc, unsigned int offset) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + int gpio = upboard_rpi_to_native_gpio(gc, offset); + unsigned int pin = pctrl->rpi_mapping[offset]; + char name[strlen(pctrl->pctldesc->pins[pin].name)]; + char *p; + + if (gpio < 0) + return; + + pinctrl_gpio_free(gpio); + + strcpy(name, pctrl->pctldesc->pins[pin].name); + p = name; + upboard_alt_func_enable(gc, strsep(&p, "_")); +} + +static int upboard_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + int gpio = upboard_rpi_to_native_gpio(gc, offset); + + if (gpio < 0) + return gpio; + + return gpiod_get_value(gpio_to_desc(gpio)); +} + +static void upboard_gpio_set(struct gpio_chip *gc, unsigned int offset, + int value) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int pin = pctrl->rpi_mapping[offset]; + int gpio = upboard_rpi_to_native_gpio(gc, offset); + + if (gpio < 0) + return; + + gpiod_set_value(gpio_to_desc(gpio), value); + + //APL03 open drain GPIO + if (pctrl->ident == 9) { + if (pin == 0 || pin == 1) { + int val = readl(pctrl->pins[pin].regs); + + if (value) + val |= PADCFG0_GPIOTXDIS; + else + val &= ~PADCFG0_GPIOTXDIS; + writel(val, pctrl->pins[pin].regs); + } + } +} + +static int upboard_gpio_direction_input(struct gpio_chip *gc, + unsigned int offset) +{ + int gpio = upboard_rpi_to_native_gpio(gc, offset); + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int pin = pctrl->rpi_mapping[offset]; + struct pinctrl_gpio_range *range; + + range = pinctrl_find_gpio_range_from_pin(pctrl->pctldev, pin); + upboard_fpga_set_direction(pctrl->pctldev, range, pin, true); + + if (gpio < 0) + return gpio; + + return gpiod_direction_input(gpio_to_desc(gpio)); +} + +static int upboard_gpio_direction_output(struct gpio_chip *gc, + unsigned int offset, int value) +{ + int gpio = upboard_rpi_to_native_gpio(gc, offset); + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int pin = pctrl->rpi_mapping[offset]; + struct pinctrl_gpio_range *range; + + range = pinctrl_find_gpio_range_from_pin(pctrl->pctldev, pin); + upboard_fpga_set_direction(pctrl->pctldev, range, pin, false); + + if (gpio < 0) + return gpio; + + return gpiod_direction_output(gpio_to_desc(gpio), value); +} + +static struct gpio_chip upboard_gpio_chip = { + .label = "Raspberry Pi compatible UP GPIO", + .base = 0, + .request = upboard_gpio_request, + .free = upboard_gpio_free, + .get = upboard_gpio_get, + .set = upboard_gpio_set, + .direction_input = upboard_gpio_direction_input, + .direction_output = upboard_gpio_direction_output, + .owner = THIS_MODULE, +}; + +/* DMI Matches for older bios without fpga initialization */ +static const struct dmi_system_id upboard_dmi_table[] __initconst = { + { + .matches = { /* UP */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-CHT01"), + DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V0.4"), + }, + .driver_data = (void *)&upboard_up_bios_info_dvt, + }, + { + .matches = { /* UP2 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-APL01"), + DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V0.3"), + }, + .driver_data = (void *)&upboard_up2_bios_info_v0_3, + }, + { + .ident = 9, + .matches = { /* UP2 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-APL03"), + }, + }, + { + .ident = 13, + .matches = { /* UP 6000 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPN-EHL01"), + }, + }, + { + .ident = 14, + .matches = { /* UP squared v2 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPS-EHL01"), + }, + }, + { + .ident = 15, + .matches = { /* UP Xtreme i12 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPX-ADLP01"), + }, + }, + { } /* Terminating entry */ +}; + +bool regmap_check_writeable(struct upboard_fpga *fpga, unsigned int reg) +{ + if (!fpga) + return -ENOMEM; + + if (fpga->regmapconf->max_register && + reg > fpga->regmapconf->max_register) + return false; + + if (fpga->regmapconf->writeable_reg) + return fpga->regmapconf->writeable_reg(fpga->dev, reg); + + if (fpga->regmapconf->wr_table) + return regmap_check_range_table(fpga->regmap, reg, + fpga->regmapconf->wr_table); + + return true; +} + +static void __iomem *upboard_get_regs(struct gpio_chip *gc, unsigned int pin, + unsigned int reg) +{ + struct platform_device *pdev = to_platform_device(gc->parent); + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + size_t nregs; + void __iomem *base; + u32 offset, value; + + //UP ADL/TGL + if (strstr(dev_name(&pdev->dev), "INTC1055:00") || + strstr(dev_name(&pdev->dev), "INT34C5:00")) { + struct intel_pinctrl *intel_pctrl = gpiochip_get_data(gc); + struct pinctrl_dev *pctldev; + struct pinctrl_gpio_range *range; + + //of_pinctrl_get(gc->parent->of_node); + pctldev = intel_pctrl->pctldev; + if (pctldev == NULL) + return NULL; + + range = pinctrl_find_gpio_range_from_pin(pctldev, pin); + if (range) + pin = pin - range->pin_base; + else + return NULL; + + if (range->pin_base < 67) + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + else if (range->pin_base < 171) + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + else if (range->pin_base < 260) + res = platform_get_resource(pdev, IORESOURCE_MEM, 2); + else + res = platform_get_resource(pdev, IORESOURCE_MEM, 3); + } + + if (IS_ERR(res)) { + dev_info(gc->parent, "upboard resource get failed"); + return NULL; + } + + base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + offset = readl(base + PADBAR); + value = readl(base + REVID); + + if (((value & REVID_MASK) >> REVID_SHIFT) >= 0x94) + nregs = 4; + else + nregs = 2; + + return base + offset + reg + pin * nregs * 4; +} + +int upboard_acpi_node_pin_mapping(struct upboard_fpga *fpga, + struct upboard_pinctrl *pctrl, + const char *propname, + const char *pinctl_name, + unsigned int pin_offset) +{ + struct gpio_descs *descs; + int ret, i; + + descs = devm_gpiod_get_array(fpga->dev, propname, GPIOD_ASIS); + if (IS_ERR(descs)) { + ret = PTR_ERR(descs); + if (ret != -EPROBE_DEFER) + dev_err(fpga->dev, "Failed to get %s gpios", propname); + return ret; + } + + for (i = 0; i < descs->ndescs; i++) { + struct gpio_desc *desc = descs->desc[i]; + struct gpio_chip *gc = gpiod_to_chip(desc); + + //if (IS_ERR(desc)) + // return PTR_ERR(desc); + pctrl->pins[i].gpio = desc_to_gpio(desc); + pctrl->pins[i].base = gc->base; + pctrl->pins[i].irq = gpiod_to_irq(desc); + pctrl->pins[i].regs = + upboard_get_regs(gc, + desc_to_gpio(desc) - gc->base, + PADCFG0); + + /* The GPIOs may not be contiguous, so add them 1-by-1 */ + ret = gpiochip_add_pin_range(gpiod_to_chip(desc), pinctl_name, + desc_to_gpio(desc) - gc->base, + pin_offset + i, 1); + if (ret) + return ret; + } + + //dispose acpi resource + devm_gpiod_put_array(fpga->dev, descs); + + return ret; +} + +static void upboard_irq_ack(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + + dev_info(NULL, "upboard_irq_ack"); +} + +static void upboard_irq_mask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + + dev_info(NULL, "upboard_irq_mask"); +} + +static void upboard_irq_unmask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + + switch (irqd_get_trigger_type(d)) { + case IRQ_TYPE_LEVEL_HIGH: + //value |= BYT_TRIG_LVL; + fallthrough; + case IRQ_TYPE_EDGE_RISING: + //value |= BYT_TRIG_POS; + break; + case IRQ_TYPE_LEVEL_LOW: + //value |= BYT_TRIG_LVL; + fallthrough; + case IRQ_TYPE_EDGE_FALLING: + //value |= BYT_TRIG_NEG; + break; + case IRQ_TYPE_EDGE_BOTH: + //value |= (BYT_TRIG_NEG | BYT_TRIG_POS); + break; + } + + dev_info(NULL, "upboard_irq_unmask"); +} + +static int upboard_irq_type(struct irq_data *d, unsigned int type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + + dev_info(NULL, "upboard_irq_type"); + + return 0; +} + +static irqreturn_t upboard_gpio_irq_handler(int irq, void *data) +{ + //struct up_pin_info *pin = (struct up_pin_info *)data; + + generic_handle_irq(irq); + return IRQ_HANDLED; +} + +static int upboard_irq_chip_set_type(struct irq_data *data, unsigned int type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(data); + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int offset = irqd_to_hwirq(data); + + data->parent_data = irq_get_irq_data(pctrl->pins[offset].irq); + if (data->parent_data) { + dev_info(NULL, "%s: no NULL", __func__); + return irq_chip_set_type_parent(data, type); + } + + dev_info(NULL, "%s: NULL", __func__); + return 0; +} + +static struct irq_chip upboard_gpio_irqchip = { + .name = "upboard-gpio-irq", + .irq_ack = upboard_irq_ack, + .irq_mask = upboard_irq_mask, + .irq_unmask = upboard_irq_unmask, + .irq_set_type = upboard_irq_chip_set_type, + .flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE, +}; + +static int __init upboard_pinctrl_probe(struct platform_device *pdev) +{ + struct upboard_fpga * const fpga = dev_get_drvdata(pdev->dev.parent); + struct acpi_device * const adev = ACPI_COMPANION(&pdev->dev); + struct pinctrl_desc *pctldesc; + const struct upboard_bios *bios_info = NULL; + struct upboard_pinctrl *pctrl; + struct upboard_pin *pins; + const struct dmi_system_id *system_id; + const char *hid; + const unsigned int *rpi_mapping; + unsigned int ngpio; + int ret; + int i; + + if (!fpga) + return -EINVAL; + + if (!adev) + return -ENODEV; + + hid = acpi_device_hid(adev); + if (!strcmp(hid, "AANT0F00") || !strcmp(hid, "AANT0F04") || + !strcmp(hid, "AANT0000")) { + pctldesc = &upboard_up_pinctrl_desc; + rpi_mapping = upboard_up_rpi_mapping; + ngpio = ARRAY_SIZE(upboard_up_rpi_mapping); + } else if (!strcmp(hid, "AANT0F01")) { + pctldesc = &upboard_up2_pinctrl_desc; + rpi_mapping = upboard_up2_rpi_mapping; + ngpio = ARRAY_SIZE(upboard_up2_rpi_mapping); + } else if (!strcmp(hid, "AANT0F02")) { + pctldesc = &upboard_upcore_crex_pinctrl_desc; + rpi_mapping = upboard_upcore_crex_rpi_mapping; + ngpio = ARRAY_SIZE(upboard_upcore_crex_rpi_mapping); + bios_info = &upboard_upcore_crex_bios_info; + } else if (!strcmp(hid, "AANT0F03")) { + pctldesc = &upboard_upcore_crst02_pinctrl_desc; + rpi_mapping = upboard_upcore_crst02_rpi_mapping; + ngpio = ARRAY_SIZE(upboard_upcore_crst02_rpi_mapping); + bios_info = &upboard_upcore_crst02_bios_info; + } else + return -ENODEV; + + pctldesc->name = dev_name(&pdev->dev); + + pins = devm_kzalloc(&pdev->dev, + sizeof(*pins) * pctldesc->npins, + GFP_KERNEL); + if (!pins) + return -ENOMEM; + + /* initialise pins */ + for (i = 0; i < pctldesc->npins; i++) { + struct upboard_pin *pin = &pins[i]; + struct pinctrl_pin_desc *pd = + (struct pinctrl_pin_desc *) &pctldesc->pins[i]; + struct reg_field fldconf = {0}; + unsigned int regoff = (pd->number / UPFPGA_REGISTER_SIZE); + unsigned int lsb = pd->number % UPFPGA_REGISTER_SIZE; + + pin->funcbit = NULL; + + if (pd->drv_data) { + fldconf = *(struct reg_field *)pd->drv_data; + if (!regmap_check_writeable(fpga, fldconf.reg)) + return -EINVAL; + + pin->funcbit = devm_regmap_field_alloc(&pdev->dev, + fpga->regmap, + fldconf); + if (IS_ERR(pin->funcbit)) + return PTR_ERR(pin->funcbit); + } + + pin->enbit = NULL; + fldconf.reg = UPFPGA_REG_GPIO_EN0 + regoff; + fldconf.lsb = lsb; + fldconf.msb = lsb; + + /* some platform don't have enable bit, ignore if not present */ + if (regmap_check_writeable(fpga, fldconf.reg)) { + pin->enbit = devm_regmap_field_alloc(&pdev->dev, + fpga->regmap, + fldconf); + if (IS_ERR(pin->enbit)) + return PTR_ERR(pin->enbit); + } + + fldconf.reg = UPFPGA_REG_GPIO_DIR0 + regoff; + fldconf.lsb = lsb; + fldconf.msb = lsb; + + if (!regmap_check_writeable(fpga, fldconf.reg)) + return -EINVAL; + + pin->dirbit = devm_regmap_field_alloc(&pdev->dev, + fpga->regmap, + fldconf); + if (IS_ERR(pin->dirbit)) + return PTR_ERR(pin->dirbit); + + pd->drv_data = pin; + } + + /* create a new pinctrl device and register it */ + pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL); + if (!pctrl) + return -ENOMEM; + + pctrl->regmap = fpga->regmap; + pctrl->rpi_mapping = rpi_mapping; + pctrl->chip = upboard_gpio_chip; + pctrl->pctldesc = pctldesc; + pctrl->chip.parent = &pdev->dev; + pctrl->chip.ngpio = ngpio; + pctrl->pins = pins; + pctrl->chip.irq.chip = &upboard_gpio_irqchip; + + ret = devm_gpiochip_add_data(&pdev->dev, &pctrl->chip, pctrl); + if (ret) + return ret; + + pctrl->pctldev = devm_pinctrl_register(&pdev->dev, pctldesc, pctrl); + if (IS_ERR(pctrl->pctldev)) + return PTR_ERR(pctrl->pctldev); + + /* add acpi pin mapping according to external-gpios key */ + ret = upboard_acpi_node_pin_mapping(fpga, pctrl, + "external", + dev_name(&pdev->dev), + 0); + if (ret) + return ret; + + if (!bios_info) { + // check for special board version that require register patches + system_id = dmi_first_match(upboard_dmi_table); + if (system_id) { + bios_info = system_id->driver_data; + pctrl->ident = system_id->ident; + } + } + + if (bios_info && bios_info->patches) { + ret = regmap_register_patch(pctrl->regmap, + bios_info->patches, + bios_info->npatches); + if (ret) + return ret; + } + + upboard_alt_func_enable(&pctrl->chip, "I2C"); + upboard_alt_func_enable(&pctrl->chip, "SPI"); + upboard_alt_func_enable(&pctrl->chip, "UART"); + upboard_alt_func_enable(&pctrl->chip, "I2S"); + upboard_alt_func_enable(&pctrl->chip, "PWM"); + upboard_alt_func_enable(&pctrl->chip, "ADC"); + upboard_alt_func_enable(&pctrl->chip, "NONAME"); //for UP2 I2C pins + + //display mapping info. + //for(i=0;inpins;i++){ + // dev_info(&pdev->dev,"Name:%s, GPIO:%d, IRQ:%d, regs:0x%08x", + // pctldesc->pins[i].name,pins[i].gpio, pins[i].irq, pins[i].regs); + // if(pins[i].regs) + // dev_info(&pdev->dev,"val:%pS", readl(pins[i].regs)); + //} + + return ret; +} + +static struct platform_driver upboard_pinctrl_driver = { + .driver = { + .name = "upboard-pinctrl", + }, +}; +module_platform_driver_probe(upboard_pinctrl_driver, upboard_pinctrl_probe); + +MODULE_AUTHOR("Gary Wang "); +MODULE_AUTHOR("Javier Arteaga "); +MODULE_AUTHOR("Dan O'Donovan "); +MODULE_AUTHOR("Nicola Lunghi "); +MODULE_DESCRIPTION("UP Board HAT pin controller driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:upboard-pinctrl"); From patchwork Wed Nov 9 09:09:57 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "larry.lai" X-Patchwork-Id: 623201 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 66F3FC4332F for ; Wed, 9 Nov 2022 09:13:31 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230106AbiKIJNa (ORCPT ); Wed, 9 Nov 2022 04:13:30 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49710 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230140AbiKIJMr (ORCPT ); Wed, 9 Nov 2022 04:12:47 -0500 Received: from APC01-PSA-obe.outbound.protection.outlook.com (mail-psaapc01on2106.outbound.protection.outlook.com [40.107.255.106]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4347620F53; Wed, 9 Nov 2022 01:11:59 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=KqQsQ0rsU/ptjIKX9vt7fwoiIkHmdcwvw8hMbQki352MIzgEkCdOZEFaRmmlV4PlGji0M8VTFMYyyuZD7uueAYARFe+lZvE8Gjng8yium/HTzzrdvQbQv/Su5tbBelhVxrFaDPlxH7vQlMjbsZmXIFnGKyrhEkj47vN2HTyFaB/26dhS2KrlF+Pj585wP0eOhEJtaxU/jPjOYFmeVAC2QdvdINdboW8wIHUv7kkQjTl4ebJm1ld4Lpp7vbWivvZwsYHQgk7XYZpkiIZrbIhTpQ9YbVLxEI8514UaL1/rdr8WOMjSFIcgJAgFsbT/G4eUaf+kbn0cI/qazkSOuYs0VQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=OyWUPELGnW7IyyQ7ftfKtcP49RXjNjxzGEZd1EAd704=; b=CS4TJzx/81gyIQoaiJm/D3iJ4z/x1cH+HlKlPs99vNHxLygVkV6VTzYwG1P32gMCukkew6CvpwgN8Hqst9mnyvX06B9nUFPS1pOZzoJigxCmCqj/3I8wMt9Tjo3tEpZ48dy79toepa6S8tdZDsFZKcG+O6CTsimlVLwK6SV9JbE1wGobMLrRIQhQDgzx2BENHFcbCTXFR9oa9krlWS3i0vZvSneHtUY85jS5ImC++oznlxWRCatuxmsmvaq1PXi9edzo1cwp/fnVD2FnVbivNoXZIvKUGkl4ftMiaGL1cykYDDJeYsffKbATP7dupgzE+zX1lThtt7qwPYOfUiA9CQ== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=yunjingtech.com; dmarc=pass action=none header.from=yunjingtech.com; dkim=pass header.d=yunjingtech.com; arc=none Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=yunjingtech.com; Received: from SG2PR06MB3742.apcprd06.prod.outlook.com (2603:1096:4:d8::14) by SI2PR06MB3881.apcprd06.prod.outlook.com (2603:1096:4:fc::6) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.5791.27; Wed, 9 Nov 2022 09:11:56 +0000 Received: from SG2PR06MB3742.apcprd06.prod.outlook.com ([fe80::9ac2:8b0a:9ad:24b5]) by SG2PR06MB3742.apcprd06.prod.outlook.com ([fe80::9ac2:8b0a:9ad:24b5%5]) with mapi id 15.20.5791.027; Wed, 9 Nov 2022 09:11:56 +0000 From: chengwei To: lee@kernel.org, andriy.shevchenko@linux.intel.com, linus.walleij@linaro.org, pavel@ucw.cz Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, linux-leds@vger.kernel.org, GaryWang@aaeon.com.tw, musa.lin@yunjingtech.com, jack.chang@yunjingtech.com, noah.hung@yunjingtech.com, chengwei Subject: [PATCH V3 3/3] leds: Add support for UP board CPLD onboard LEDS Date: Wed, 9 Nov 2022 17:09:57 +0800 Message-Id: <20221109090957.13167-4-larry.lai@yunjingtech.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20221109090957.13167-1-larry.lai@yunjingtech.com> References: <20221109090957.13167-1-larry.lai@yunjingtech.com> X-ClientProxiedBy: TYAPR01CA0059.jpnprd01.prod.outlook.com (2603:1096:404:2b::23) To SG2PR06MB3742.apcprd06.prod.outlook.com (2603:1096:4:d8::14) MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: SG2PR06MB3742:EE_|SI2PR06MB3881:EE_ X-MS-Office365-Filtering-Correlation-Id: 437ced64-3051-41a1-9662-08dac232733a X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:SG2PR06MB3742.apcprd06.prod.outlook.com; PTR:; CAT:NONE; SFS:(13230022)(136003)(39830400003)(346002)(376002)(366004)(396003)(451199015)(4326008)(86362001)(26005)(41300700001)(107886003)(478600001)(38350700002)(2906002)(38100700002)(36756003)(6512007)(8936002)(2616005)(186003)(1076003)(8676002)(5660300002)(6486002)(66476007)(66556008)(316002)(66946007)(52116002)(6506007)(43062005); DIR:OUT; SFP:1102; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: yunjingtech.com X-MS-Exchange-CrossTenant-Network-Message-Id: 437ced64-3051-41a1-9662-08dac232733a X-MS-Exchange-CrossTenant-AuthSource: SG2PR06MB3742.apcprd06.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 09 Nov 2022 09:11:56.5750 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: be2d5505-f7e6-4600-bbe2-b3201c91b344 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: uBSbbjMu6Hq2ofmlTBCb4MxHnE/6oW1pZoHncqAMHWN/3RhaqIJkRKAF8UAQRg3i31Tv2GLMRfFqH3Hc5ddwV9U4A7S7mlSY7fZcsbxX5Us= X-MS-Exchange-Transport-CrossTenantHeadersStamped: SI2PR06MB3881 Precedence: bulk List-ID: X-Mailing-List: linux-leds@vger.kernel.org The UP boards come with a few FPGA-controlled onboard LEDs: * UP Board: yellow, green, red * UP Squared: blue, yellow, green, red this patch depends on patch "mfd: Add support for UP board CPLD/FPGA" PATCH V3: PATCH V2: There is no change. Signed-off-by: chengwei --- drivers/leds/Kconfig | 10 +++++ drivers/leds/Makefile | 1 + drivers/leds/leds-upboard.c | 78 +++++++++++++++++++++++++++++++++++++ 3 files changed, 89 insertions(+) create mode 100644 drivers/leds/leds-upboard.c diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 499d0f215a8b..80b9c394c5b6 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -872,6 +872,16 @@ source "drivers/leds/flash/Kconfig" comment "RGB LED drivers" source "drivers/leds/rgb/Kconfig" +config LEDS_UPBOARD + tristate "LED support for the UP board" + depends on LEDS_CLASS + depends on MFD_UPBOARD_FPGA + help + This option enables support for the UP board LEDs. + + To compile this driver as a module, choose M here: the module + will be called leds-upboard. + comment "LED Triggers" source "drivers/leds/trigger/Kconfig" diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 4fd2f92cd198..e72956645646 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -83,6 +83,7 @@ obj-$(CONFIG_LEDS_TI_LMU_COMMON) += leds-ti-lmu-common.o obj-$(CONFIG_LEDS_TLC591XX) += leds-tlc591xx.o obj-$(CONFIG_LEDS_TPS6105X) += leds-tps6105x.o obj-$(CONFIG_LEDS_TURRIS_OMNIA) += leds-turris-omnia.o +obj-$(CONFIG_LEDS_UPBOARD) += leds-upboard.o obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o diff --git a/drivers/leds/leds-upboard.c b/drivers/leds/leds-upboard.c new file mode 100644 index 000000000000..214325442f3b --- /dev/null +++ b/drivers/leds/leds-upboard.c @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UP Board FPGA-based LED driver + * + * Copyright (c) 2017, Emutex Ltd. All rights reserved. + * + * Author: Javier Arteaga + */ + +#include +#include +#include +#include +#include +#include + +struct upboard_led { + struct led_classdev cdev; + struct regmap_field *field; +}; + +static enum led_brightness upboard_led_brightness_get(struct led_classdev *cdev) +{ + struct upboard_led *led = container_of(cdev, struct upboard_led, cdev); + int brightness = 0; + + regmap_field_read(led->field, &brightness); + + return brightness; +}; + +static void upboard_led_brightness_set(struct led_classdev *cdev, enum led_brightness brightness) +{ + struct upboard_led *led = container_of(cdev, struct upboard_led, cdev); + + regmap_field_write(led->field, brightness != LED_OFF); +}; + +static int __init upboard_led_probe(struct platform_device *pdev) +{ + struct upboard_fpga * const up_fpga = dev_get_drvdata(pdev->dev.parent); + struct reg_field fldconf = { + .reg = UPFPGA_REG_FUNC_EN0, + }; + struct upboard_led_data * const pdata = pdev->dev.platform_data; + struct upboard_led *led; + + led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL); + if (!led) + return -ENOMEM; + + fldconf.lsb = pdata->bit; + fldconf.msb = pdata->bit; + led->field = devm_regmap_field_alloc(&pdev->dev, up_fpga->regmap, fldconf); + if (IS_ERR(led->field)) + return PTR_ERR(led->field); + + led->cdev.brightness_get = upboard_led_brightness_get; + led->cdev.brightness_set = upboard_led_brightness_set; + led->cdev.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "upboard:%s:", + pdata->colour); + if (!led->cdev.name) + return -ENOMEM; + + return devm_led_classdev_register(&pdev->dev, &led->cdev); +}; + +static struct platform_driver upboard_led_driver = { + .driver = { + .name = "upboard-led", + }, +}; +module_platform_driver_probe(upboard_led_driver, upboard_led_probe); + +MODULE_AUTHOR("Javier Arteaga "); +MODULE_DESCRIPTION("UP Board LED driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:upboard-led");