From patchwork Wed Dec 14 15:51:52 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Paul Cercueil X-Patchwork-Id: 634007 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7042DC4332F for ; Wed, 14 Dec 2022 15:55:46 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S238883AbiLNPzo (ORCPT ); Wed, 14 Dec 2022 10:55:44 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56126 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S238543AbiLNPzL (ORCPT ); Wed, 14 Dec 2022 10:55:11 -0500 Received: from aposti.net (aposti.net [89.234.176.197]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 875E222BEB; Wed, 14 Dec 2022 07:52:02 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=crapouillou.net; s=mail; t=1671033120; h=from:from:sender:reply-to:subject:subject:date:date: message-id:message-id:to:to:cc:cc:mime-version:mime-version: content-type:content-transfer-encoding:content-transfer-encoding: in-reply-to:references; bh=YRL5sJ42jhkTvOpzrg4NajyICaCxQ2PTuqh2BbCymYs=; b=NZX80XItVP+sADWF3XB1PXQddE+uBmo+fB1SQUMqoUFAO6K+VMNiq5Xf3qm0FBMMnh+U4B HB/ZUwgWPb/k3CFcmQ623y+uqk+eV6ZYM2rdZJst85kI2++WLVycHRB+ud9+ZKKpsQTI4b ZlUotoz0Uv2hfCWgBqBGQ2EHD8yM09k= From: Paul Cercueil To: Liam Girdwood , Mark Brown , Rob Herring , Krzysztof Kozlowski Cc: list@opendingux.net, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Paul Cercueil Subject: [PATCH v4] regulator: dt-bindings: Convert active-semi PMIC docs to YAML schemas Date: Wed, 14 Dec 2022 16:51:52 +0100 Message-Id: <20221214155152.14349-1-paul@crapouillou.net> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Create YAML bindings for the Active-semi PMICs and remove the old text files. The bindings aren't perfect, for instance I couldn't find good descriptions for the vendor properties in the "charger" node of the ACT8945A because I am not familiar with the hardware and these properties were not documented anywhere. The YAML schemas are a bit different than what is described in the old text files, because these were sometimes wrong or had missing information. This is the case for the ACT8600 documentation, which specified the valid node names for the regulators, while the driver was expecting different names. This led to the current situation where we have two different boards using different names for the regulators: - arch/mips/boot/dts/ingenic/ci20.dts uses the names documented in the text file, - arch/mips/boot/dts/ingenic/gcw0.dts uses the names that the driver expects. In theory, the driver should be fixed to follow the documentation, and accept both naming schemes. In practice though, when the PMIC node was added to the ci20.dts board file, the names were already wrong in regards to what the driver expected, so it never really worked correctly and wasn't tested properly. Furthermore, in that board the consumers of the regulators aren't working for various other reasons (invalid GPIOs, etc.). For that reason, for the ACT8600 bindings I decided to only use the node names that the driver expects (and that gcw0.dts uses), instead of accepting both old and new names. A follow-up patch will update the CI20 board to use the new regulator names. Signed-off-by: Paul Cercueil --- v2: - Avoid | character in descriptions that can be single-line - Remove unevaluatedProperties when additionalProperties is also present - Remove useless inner parentheses in regular expressions - Rename I2C nodes to just... i2c - Remove node handles v3: - Fix alignment in examples - Drop useless status = "okay"; in examples - I set myself as the maintainer, which I only did because nobody else seems to care. v4: - v2/v3 changes did not update active-semi,act8865.yaml for some reason; so the cleanups mentioned above were applied to this file now. - Remove description for 'reg' property Cheers, -Paul --- .../bindings/regulator/act8865-regulator.txt | 117 -------- .../bindings/regulator/act8945a-regulator.txt | 113 -------- .../regulator/active-semi,act8600.yaml | 139 ++++++++++ .../regulator/active-semi,act8846.yaml | 205 ++++++++++++++ .../regulator/active-semi,act8865.yaml | 158 +++++++++++ .../regulator/active-semi,act8945a.yaml | 258 ++++++++++++++++++ 6 files changed, 760 insertions(+), 230 deletions(-) delete mode 100644 Documentation/devicetree/bindings/regulator/act8865-regulator.txt delete mode 100644 Documentation/devicetree/bindings/regulator/act8945a-regulator.txt create mode 100644 Documentation/devicetree/bindings/regulator/active-semi,act8600.yaml create mode 100644 Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml create mode 100644 Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml create mode 100644 Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt deleted file mode 100644 index b9f58e480349..000000000000 --- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt +++ /dev/null @@ -1,117 +0,0 @@ -ACT88xx regulators -------------------- - -Required properties: -- compatible: "active-semi,act8846" or "active-semi,act8865" or "active-semi,act8600" -- reg: I2C slave address - -Optional properties: -- system-power-controller: Telling whether or not this pmic is controlling - the system power. See Documentation/devicetree/bindings/power/power-controller.txt . -- active-semi,vsel-high: Indicates the VSEL pin is high. - If this property is missing, assume the VSEL pin is low(0). - -Optional input supply properties: -- for act8600: - - vp1-supply: The input supply for DCDC_REG1 - - vp2-supply: The input supply for DCDC_REG2 - - vp3-supply: The input supply for DCDC_REG3 - - inl-supply: The input supply for LDO_REG5, LDO_REG6, LDO_REG7 and LDO_REG8 - SUDCDC_REG4, LDO_REG9 and LDO_REG10 do not have separate supplies. -- for act8846: - - vp1-supply: The input supply for REG1 - - vp2-supply: The input supply for REG2 - - vp3-supply: The input supply for REG3 - - vp4-supply: The input supply for REG4 - - inl1-supply: The input supply for REG5, REG6 and REG7 - - inl2-supply: The input supply for REG8 and LDO_REG9 - - inl3-supply: The input supply for REG10, REG11 and REG12 -- for act8865: - - vp1-supply: The input supply for DCDC_REG1 - - vp2-supply: The input supply for DCDC_REG2 - - vp3-supply: The input supply for DCDC_REG3 - - inl45-supply: The input supply for LDO_REG1 and LDO_REG2 - - inl67-supply: The input supply for LDO_REG3 and LDO_REG4 - -Any standard regulator properties can be used to configure the single regulator. -regulator-initial-mode, regulator-allowed-modes and regulator-mode could be specified -for act8865 using mode values from dt-bindings/regulator/active-semi,8865-regulator.h -file. - -The valid names for regulators are: - - for act8846: - REG1, REG2, REG3, REG4, REG5, REG6, REG7, REG8, REG9, REG10, REG11, REG12 - - for act8865: - DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4. - - for act8600: - DCDC_REG1, DCDC_REG2, DCDC_REG3, SUDCDC_REG4, LDO_REG5, LDO_REG6, LDO_REG7, - LDO_REG8, LDO_REG9, LDO_REG10, - -Example: --------- - -#include - - i2c1: i2c@f0018000 { - pmic: act8865@5b { - compatible = "active-semi,act8865"; - reg = <0x5b>; - active-semi,vsel-high; - - regulators { - vcc_1v8_reg: DCDC_REG1 { - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vcc_1v2_reg: DCDC_REG2 { - regulator-name = "VCC_1V2"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - - regulator-allowed-modes = , - ; - regulator-initial-mode = ; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-min-microvolt = <1150000>; - regulator-suspend-max-microvolt = <1150000>; - regulator-changeable-in-suspend; - regulator-mode = ; - }; - }; - - vcc_3v3_reg: DCDC_REG3 { - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vddana_reg: LDO_REG1 { - regulator-name = "VDDANA"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - - regulator-allowed-modes = , - ; - regulator-initial-mode = ; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vddfuse_reg: LDO_REG2 { - regulator-name = "FUSE_2V5"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt deleted file mode 100644 index 4017527619ab..000000000000 --- a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt +++ /dev/null @@ -1,113 +0,0 @@ -Device-Tree bindings for regulators of Active-semi ACT8945A Multi-Function Device - -Required properties: - - compatible: "active-semi,act8945a", please refer to ../mfd/act8945a.txt. - -Optional properties: -- active-semi,vsel-high: Indicates if the VSEL pin is set to logic-high. - If this property is missing, assume the VSEL pin is set to logic-low. - -Optional input supply properties: - - vp1-supply: The input supply for REG_DCDC1 - - vp2-supply: The input supply for REG_DCDC2 - - vp3-supply: The input supply for REG_DCDC3 - - inl45-supply: The input supply for REG_LDO1 and REG_LDO2 - - inl67-supply: The input supply for REG_LDO3 and REG_LDO4 - -Any standard regulator properties can be used to configure the single regulator. -regulator-initial-mode, regulator-allowed-modes and regulator-mode could be -specified using mode values from dt-bindings/regulator/active-semi,8945a-regulator.h -file. - -The valid names for regulators are: - REG_DCDC1, REG_DCDC2, REG_DCDC3, REG_LDO1, REG_LDO2, REG_LDO3, REG_LDO4. - -Example: - -#include - - pmic@5b { - compatible = "active-semi,act8945a"; - reg = <0x5b>; - - active-semi,vsel-high; - - regulators { - vdd_1v35_reg: REG_DCDC1 { - regulator-name = "VDD_1V35"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - - regulator-allowed-modes = , - ; - regulator-initial-mode = ; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-min-microvolt=<1400000>; - regulator-suspend-max-microvolt=<1400000>; - regulator-changeable-in-suspend; - regulator-mode=; - }; - }; - - vdd_1v2_reg: REG_DCDC2 { - regulator-name = "VDD_1V2"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - - regulator-allowed-modes = , - ; - regulator-initial-mode = ; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_3v3_reg: REG_DCDC3 { - regulator-name = "VDD_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_fuse_reg: REG_LDO1 { - regulator-name = "VDD_FUSE"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - - regulator-allowed-modes = , - ; - regulator-initial-mode = ; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_3v3_lp_reg: REG_LDO2 { - regulator-name = "VDD_3V3_LP"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_led_reg: REG_LDO3 { - regulator-name = "VDD_LED"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_sdhc_1v8_reg: REG_LDO4 { - regulator-name = "VDD_SDHC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8600.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8600.yaml new file mode 100644 index 000000000000..b8ca967bc83d --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/active-semi,act8600.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/active-semi,act8600.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Active-semi ACT8600 regulator + +maintainers: + - Paul Cercueil + +properties: + compatible: + const: active-semi,act8600 + + reg: + maxItems: 1 + + system-power-controller: + description: + Indicates that the ACT8600 is responsible for powering OFF + the system. + type: boolean + + active-semi,vsel-high: + description: + Indicates the VSEL pin is high. If this property is missing, + the VSEL pin is assumed to be low. + type: boolean + + regulators: + type: object + additionalProperties: false + + properties: + DCDC1: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + vp1-supply: + description: Handle to the VP1 input supply + + DCDC2: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + vp2-supply: + description: Handle to the VP2 input supply + + DCDC3: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + vp3-supply: + description: Handle to the VP3 input supply + + patternProperties: + "^(SUDCDC_REG4|LDO_REG9|LDO_REG10)$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + "^LDO[5-8]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + inl-supply: + description: Handle to the INL input supply + +additionalProperties: false + +required: + - reg + - compatible + - regulators + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@5a { + compatible = "active-semi,act8600"; + reg = <0x5a>; + + regulators { + SUDCDC_REG4 { + regulator-min-microvolt = <5300000>; + regulator-max-microvolt = <5300000>; + inl-supply = <&vcc>; + }; + + LDO5 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + inl-supply = <&vcc>; + }; + + LDO6 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + inl-supply = <&vcc>; + }; + + LDO7 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + inl-supply = <&vcc>; + }; + + LDO8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + inl-supply = <&vcc>; + }; + + LDO_REG9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + inl-supply = <&vcc>; + }; + + LDO_REG10 { + inl-supply = <&vcc>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml new file mode 100644 index 000000000000..3725348bb235 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml @@ -0,0 +1,205 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/active-semi,act8846.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Active-semi ACT8846 regulator + +maintainers: + - Paul Cercueil + +properties: + compatible: + const: active-semi,act8846 + + reg: + maxItems: 1 + + system-power-controller: + description: + Indicates that the ACT8846 is responsible for powering OFF + the system. + type: boolean + + active-semi,vsel-high: + description: + Indicates the VSEL pin is high. If this property is missing, + the VSEL pin is assumed to be low. + type: boolean + + regulators: + type: object + additionalProperties: false + + properties: + REG1: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + vp1-supply: + description: Handle to the VP1 input supply + + REG2: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + vp2-supply: + description: Handle to the VP2 input supply + + REG3: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + vp3-supply: + description: Handle to the VP3 input supply + + REG4: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + vp4-supply: + description: Handle to the VP4 input supply + + patternProperties: + "^REG[5-7]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + inl1-supply: + description: Handle to the INL1 input supply + + "^REG[8-9]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + inl2-supply: + description: Handle to the INL2 input supply + + "^REG1[0-2]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + inl3-supply: + description: Handle to the INL3 input supply + +additionalProperties: false + +required: + - reg + - compatible + - regulators + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@5a { + compatible = "active-semi,act8846"; + reg = <0x5a>; + + system-power-controller; + + regulators { + REG1 { + regulator-name = "VCC_DDR"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + REG2 { + regulator-name = "VCC_IO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + REG3 { + regulator-name = "VDD_LOG"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + REG4 { + regulator-name = "VCC_20"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + REG5 { + regulator-name = "VCCIO_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + REG6 { + regulator-name = "VDD10_LCD"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + REG7 { + regulator-name = "VCC_WL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + REG8 { + regulator-name = "VCCA_33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + REG9 { + regulator-name = "VCC_LAN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + REG10 { + regulator-name = "VDD_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + REG11 { + regulator-name = "VCC_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + REG12 { + regulator-name = "VCC18_LCD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml new file mode 100644 index 000000000000..e8bf09faafb8 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/active-semi,act8865.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Active-semi ACT8865 regulator + +maintainers: + - Paul Cercueil + +properties: + compatible: + const: active-semi,act8865 + + reg: + maxItems: 1 + + system-power-controller: + description: + Indicates that the ACT8865 is responsible for powering OFF + the system. + type: boolean + + active-semi,vsel-high: + description: + Indicates the VSEL pin is high. If this property is missing, + the VSEL pin is assumed to be low. + type: boolean + + regulators: + type: object + additionalProperties: false + + properties: + DCDC_REG1: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + vp1-supply: + description: Handle to the VP1 input supply + + DCDC_REG2: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + vp2-supply: + description: Handle to the VP2 input supply + + DCDC_REG3: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + vp3-supply: + description: Handle to the VP3 input supply + + patternProperties: + "^LDO_REG[1-2]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + inl45-supply: + description: Handle to the INL45 input supply + + "^LDO_REG[3-4]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + inl67-supply: + description: Handle to the INL67 input supply + +additionalProperties: false + +required: + - reg + - compatible + - regulators + +examples: + - | + #include + + i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + pmic@5b { + compatible = "active-semi,act8865"; + reg = <0x5b>; + active-semi,vsel-high; + + regulators { + DCDC_REG1 { + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + DCDC_REG2 { + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + + regulator-allowed-modes = , + ; + regulator-initial-mode = ; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-min-microvolt = <1150000>; + regulator-suspend-max-microvolt = <1150000>; + regulator-changeable-in-suspend; + regulator-mode = ; + }; + }; + + DCDC_REG3 { + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + LDO_REG1 { + regulator-name = "VDDANA"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + regulator-allowed-modes = , + ; + regulator-initial-mode = ; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + LDO_REG2 { + regulator-name = "FUSE_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml new file mode 100644 index 000000000000..bdf3f7d34ef5 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml @@ -0,0 +1,258 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/active-semi,act8945a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Active-semi ACT8945a regulator + +maintainers: + - Paul Cercueil + +properties: + compatible: + const: active-semi,act8945a + + reg: + maxItems: 1 + + system-power-controller: + description: + Indicates that the ACT8945a is responsible for powering OFF + the system. + type: boolean + + active-semi,vsel-high: + description: + Indicates the VSEL pin is high. If this property is missing, + the VSEL pin is assumed to be low. + type: boolean + + regulators: + type: object + additionalProperties: false + + properties: + REG_DCDC1: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + vp1-supply: + description: Handle to the VP1 input supply + + REG_DCDC2: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + vp2-supply: + description: Handle to the VP2 input supply + + REG_DCDC3: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + vp3-supply: + description: Handle to the VP3 input supply + + patternProperties: + "^REG_LDO[1-2]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + inl45-supply: + description: Handle to the INL45 input supply + + "^REG_LDO[3-4]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + inl67-supply: + description: Handle to the INL67 input supply + + charger: + type: object + additionalProperties: false + + properties: + compatible: + const: active-semi,act8945a-charger + + interrupts: + maxItems: 1 + + active-semi,chglev-gpios: + description: CGHLEV GPIO + maxItems: 1 + + active-semi,lbo-gpios: + description: LBO GPIO + maxItems: 1 + + active-semi,input-voltage-threshold-microvolt: + description: Input voltage threshold + maxItems: 1 + + active-semi,precondition-timeout: + description: Precondition timeout + $ref: /schemas/types.yaml#/definitions/uint32 + + active-semi,total-timeout: + description: Total timeout + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - compatible + - interrupts + +additionalProperties: false + +required: + - reg + - compatible + - regulators + +examples: + - | + #include + #include + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@5b { + compatible = "active-semi,act8945a"; + reg = <0x5b>; + active-semi,vsel-high; + + regulators { + REG_DCDC1 { + regulator-name = "VDD_1V35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-allowed-modes = , + ; + regulator-initial-mode = ; + regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-min-microvolt = <1400000>; + regulator-suspend-max-microvolt = <1400000>; + regulator-changeable-in-suspend; + regulator-mode = ; + }; + }; + + REG_DCDC2 { + regulator-name = "VDD_1V2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = , + ; + regulator-initial-mode = ; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + REG_DCDC3 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allowed-modes = , + ; + regulator-initial-mode = ; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + REG_LDO1 { + regulator-name = "VDD_FUSE"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-allowed-modes = , + ; + regulator-initial-mode = ; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + REG_LDO2 { + regulator-name = "VDD_3V3_LP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allowed-modes = , + ; + regulator-initial-mode = ; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + REG_LDO3 { + regulator-name = "VDD_LED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allowed-modes = , + ; + regulator-initial-mode = ; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + REG_LDO4 { + regulator-name = "VDD_SDHC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allowed-modes = , + ; + regulator-initial-mode = ; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + + charger { + compatible = "active-semi,act8945a-charger"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>; + interrupt-parent = <&pioA>; + interrupts = <45 IRQ_TYPE_EDGE_RISING>; + + active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>; + active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>; + active-semi,input-voltage-threshold-microvolt = <6600>; + active-semi,precondition-timeout = <40>; + active-semi,total-timeout = <3>; + }; + }; + };