From patchwork Wed Mar 15 15:43:09 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nikita Travkin X-Patchwork-Id: 663520 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 21293C6FD1D for ; Wed, 15 Mar 2023 15:43:50 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232319AbjCOPns (ORCPT ); Wed, 15 Mar 2023 11:43:48 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59960 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232361AbjCOPnq (ORCPT ); Wed, 15 Mar 2023 11:43:46 -0400 Received: from box.trvn.ru (box.trvn.ru [194.87.146.52]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 6C2107B124; Wed, 15 Mar 2023 08:43:24 -0700 (PDT) Received: from authenticated-user (box.trvn.ru [194.87.146.52]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by box.trvn.ru (Postfix) with ESMTPSA id 8F98D41853; Wed, 15 Mar 2023 20:43:20 +0500 (+05) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=trvn.ru; s=mail; t=1678895001; bh=xX7EYL7wXsayPKP8zgaIQPK4KiM6Req4Uxirxf+cywE=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=IrA+D0VtP03Lkdms5G5i3OsiTMFo6u+dGSV2HyZ9KX1oFjuc0Z6To2bSIOvMkYu/H o8r4rCbqfZAIP11oSFE3v/tnwpmOp3sTZu8dguT8G+liUKqVvgG53XUCuq0Z8ZNZk2 m1bqQ0ydAL2LWb+QV4XHTkrwtL8R0L180ShSPPZ8md05F3pfQXXhQXVS8amUo7k5bO QRgJpJbxTble8Mdc5aXMrRBmAzSTZUVkzznF7t+xhuRiv6Ba/zHgD+46U5jHptF2My Jpuiv2jGdK1RKw5IRIW+HN6Bosfi1a6Vsnq8Tm8nUrsaLuza/0uY8mxshNLgCB3XSM KWpBbfRAxP9+A== From: Nikita Travkin To: agross@kernel.org, andersson@kernel.org Cc: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, konrad.dybcio@linaro.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, ~postmarketos/upstreaming@lists.sr.ht, Nikita Travkin Subject: [PATCH v3 2/4] arm64: dts: qcom: sc7180: Drop redundant disable in mdp Date: Wed, 15 Mar 2023 20:43:09 +0500 Message-Id: <20230315154311.37299-3-nikita@trvn.ru> In-Reply-To: <20230315154311.37299-1-nikita@trvn.ru> References: <20230315154311.37299-1-nikita@trvn.ru> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org mdss is useless without a display controller which makes explicitly enabling mdp redundant. Have it enabled by default to drop the extra node for all users. Signed-off-by: Nikita Travkin --- arch/arm64/boot/dts/qcom/sc7180-idp.dts | 4 ---- arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 4 ---- arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 -- 3 files changed, 10 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index c3bdd3295c02..828c8b55d925 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -339,10 +339,6 @@ &dsi_phy { vdds-supply = <&vreg_l4a_0p8>; }; -&mdp { - status = "okay"; -}; - &mdss { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 26def6e12723..e72d49a3d97d 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -818,10 +818,6 @@ dai-link@5 { }; }; -&mdp { - status = "okay"; -}; - &mdss { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index f0de177981f9..4ee64ee824b3 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -2983,8 +2983,6 @@ mdp: display-controller@ae01000 { interrupt-parent = <&mdss>; interrupts = <0>; - status = "disabled"; - ports { #address-cells = <1>; #size-cells = <0>; From patchwork Wed Mar 15 15:43:11 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Nikita Travkin X-Patchwork-Id: 663519 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 60E4FC6FD1D for ; Wed, 15 Mar 2023 15:44:06 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232679AbjCOPoF (ORCPT ); Wed, 15 Mar 2023 11:44:05 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:60304 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232598AbjCOPnx (ORCPT ); Wed, 15 Mar 2023 11:43:53 -0400 Received: from box.trvn.ru (box.trvn.ru [194.87.146.52]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id BE019126D7; Wed, 15 Mar 2023 08:43:29 -0700 (PDT) Received: from authenticated-user (box.trvn.ru [194.87.146.52]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by box.trvn.ru (Postfix) with ESMTPSA id A83A641857; Wed, 15 Mar 2023 20:43:26 +0500 (+05) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=trvn.ru; s=mail; t=1678895007; bh=RcUJzuCROOoVcYmcaBiEn9+oAcYPvhsta/yyIo9418w=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=lciStMaM3uMvpr79wMCLGAfsTlSgOoI0ui2VlQSZ9FVrdh71qIDmsmoylqcJwSVJV ATOhE63vh/51PEoYNNnLcMSTbJyBxIvmUG0wxGhLvxxeiDNBWB/JDHhcu56VlwCc5y Zd2EyVH7zuVvZOoMbNAiGMqWohtb8hFlRbbNzlXL052gZZEdkC9OpPnFPFu3BhnrIm XvKoDuhlPxQaC3895BtYBh0cp5qPTpKMa2cTwVDrXJGzoDX5YH7+1Wb5Jl5sOneNrz HE6KVA0QE9JrUKcROl6njDaqimTqzQqoanXkg8I/d2swsTqsh6lTrhvPnCuB+jii2E Uc0SmE3DFeYFQ== From: Nikita Travkin To: agross@kernel.org, andersson@kernel.org Cc: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, konrad.dybcio@linaro.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, ~postmarketos/upstreaming@lists.sr.ht, Nikita Travkin Subject: [PATCH v3 4/4] arm64: dts: qcom: Add Acer Aspire 1 Date: Wed, 15 Mar 2023 20:43:11 +0500 Message-Id: <20230315154311.37299-5-nikita@trvn.ru> In-Reply-To: <20230315154311.37299-1-nikita@trvn.ru> References: <20230315154311.37299-1-nikita@trvn.ru> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Acer Aspire 1 is a WoA laptop based on Snapdragon 7c gen1 platform. The laptop design is similar to trogdor in the choice of primary components but the specifics on usage of those differ slightly. Add the devicetree for the laptop with support for most of the hardware present. Signed-off-by: Nikita Travkin --- Changed in v2: - Various styling, ordering and node naming issues fixed. (Krzysztof) Changed in v3: - Kepp camcc on, wakeup on touchpad, minor style issues. (Konrad) --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sc7180-acer-aspire1.dts | 859 ++++++++++++++++++ 2 files changed, 860 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 89e23a74bc7f..4bd4b4079b17 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8540p-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8775p-ride.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-acer-aspire1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts new file mode 100644 index 000000000000..b4161f1f21a7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts @@ -0,0 +1,859 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/dts-v1/; + +#include +#include + +#include "sc7180.dtsi" + +#include "pm6150.dtsi" +#include "pm6150l.dtsi" + +/delete-node/ &tz_mem; +/delete-node/ &ipa_fw_mem; + +/ { + model = "Acer Aspire 1"; + compatible = "acer,aspire1", "qcom,sc7180"; + chassis-type = "laptop"; + + aliases { + bluetooth0 = &bluetooth; + hsuart0 = &uart3; + serial0 = &uart8; + wifi0 = &wifi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + zap_mem: zap-shader@80840000 { + reg = <0 0x80840000 0 0x2000>; + no-map; + }; + + venus_mem: venus@85b00000 { + reg = <0 0x85b00000 0 0x500000>; + no-map; + }; + + mpss_mem: mpss@86000000 { + reg = <0x0 0x86000000 0x0 0x2000000>; + no-map; + }; + + adsp_mem: adsp@8e400000 { + reg = <0x0 0x8e400000 0x0 0x2800000>; + no-map; + }; + + wlan_mem: wlan@93900000 { + reg = <0x0 0x93900000 0x0 0x200000>; + no-map; + }; + }; + + max98357a: audio-codec { + compatible = "maxim,max98357a"; + sdmode-gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&_sd_mode_default>; + pinctrl-names = "default"; + + #sound-dai-cells = <0>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&sn65dsi86_bridge 1000000>; + enable-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&soc_bkoff_default>; + pinctrl-names = "default"; + }; + + reg_brij_1p2: bridge-1p2-regulator { + compatible = "regulator-fixed"; + regulator-name = "brij_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + gpio = <&tlmm 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_edp_1p2_en_default>; + pinctrl-names = "default"; + }; + + reg_brij_1p8: bridge-regulator { + compatible = "regulator-fixed"; + regulator-name = "brij_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + vin-supply = <&vreg_l8c_1p8>; + + gpio = <&tlmm 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_edp_1p8_en_default>; + pinctrl-names = "default"; + }; + + reg_codec_3p3: codec-regulator { + compatible = "regulator-fixed"; + regulator-name = "codec_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 83 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_audio_en_default>; + pinctrl-names = "default"; + }; + + reg_lcm_3p3: panel-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcm_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + /* + * HACK: Display fails with + * + * *ERROR* Unexpected max rate (0x0); assuming 5.4 GHz + * *ERROR* Link training failed, link is off (-5) + * + * if the power to the panel was ever cut + */ + regulator-always-on; + + gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_lcm_en_default>; + pinctrl-names = "default"; + }; + + reg_tp_3p3: touchpad-regulator { + compatible = "regulator-fixed"; + regulator-name = "tp_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_tp_en_default>; + pinctrl-names = "default"; + }; +}; + +&dsi0 { + vdda-supply = <&vreg_l3c_1p2>; + status = "okay"; +}; + +&dsi0_out { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi_phy { + vdds-supply = <&vreg_l4a_0p8>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + status = "okay"; + + /* embedded-controller@76 */ +}; + +&i2c4 { + clock-frequency = <400000>; + status = "okay"; + + /* + * NOTE: DSDT defines two possible touchpads, other one is + * + * reg = <0x15>; + * hid-descr-addr = <0x1>; + */ + + touchpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x20>; + + vdd-supply = <®_tp_3p3>; + + interrupts-extended = <&tlmm 94 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&hid_touchpad_default>; + pinctrl-names = "default"; + + wakeup-source; + }; + + keyboard@3a { + compatible = "hid-over-i2c"; + reg = <0x3a>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 33 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&hid_keyboard_default>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c9 { + clock-frequency = <400000>; + status = "okay"; + + alc5682: codec@1a { + compatible = "realtek,rt5682i"; + reg = <0x1a>; + + #sound-dai-cells = <1>; + + interrupt-parent = <&tlmm>; + interrupts = <28 IRQ_TYPE_EDGE_BOTH>; + + pinctrl-0 = <&codec_irq_default>; + pinctrl-names = "default"; + + AVDD-supply = <&vreg_l15a_1p8>; + MICVDD-supply = <®_codec_3p3>; + VBAT-supply = <®_codec_3p3>; + + realtek,dmic1-data-pin = <1>; + realtek,dmic1-clk-pin = <1>; + realtek,jd-src = <1>; + }; +}; + +&i2c10 { + clock-frequency = <400000>; + status = "okay"; + + sn65dsi86_bridge: bridge@2c { + compatible = "ti,sn65dsi86"; + reg = <0x2c>; + gpio-controller; + #gpio-cells = <2>; + #pwm-cells = <1>; + + interrupt-parent = <&tlmm>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>; + suspend-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&bridge_en_default>, + <&edp_bridge_irq_default>, + <&bridge_suspend_default>; + pinctrl-names = "default"; + + vpll-supply = <®_brij_1p8>; + vccio-supply = <®_brij_1p8>; + vcca-supply = <®_brij_1p2>; + vcc-supply = <®_brij_1p2>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK3>; + clock-names = "refclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sn65dsi86_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + sn65dsi86_out: endpoint { + data-lanes = <0 1>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel: panel { + compatible = "edp-panel"; + power-supply = <®_lcm_3p3>; + backlight = <&backlight>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + }; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&zap_mem>; + firmware-name = "qcom/sc7180/acer/aspire1/qcdxkmsuc7180.mbn"; + }; +}; + +&mdss { + status = "okay"; +}; + +&pm6150_adc { + thermistor@4e { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + + charger-thermistor@4f { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm6150_adc_tm { + status = "okay"; + + charger-thermistor@0 { + reg = <0>; + io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + thermistor@1 { + reg = <1>; + io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pm6150_pon { + status = "disabled"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sc7180/acer/aspire1/qcmpss7180_nm.mbn"; + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc1_default>; + pinctrl-1 = <&sdc1_sleep>; + pinctrl-names = "default", "sleep"; + vmmc-supply = <&vreg_l19a_2p9>; + vqmmc-supply = <&vreg_l12a_1p8>; + + status = "okay"; +}; + +&uart3 { + /delete-property/interrupts; + interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 41 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-1 = <&qup_uart3_sleep>; + pinctrl-names = "default", "sleep"; + + status = "okay"; + + bluetooth: bluetooth { + compatible = "qcom,wcn3991-bt"; + vddio-supply = <&vreg_l10a_1p8>; + vddxo-supply = <&vreg_l1c_1p8>; + vddrf-supply = <&vreg_l2c_1p3>; + vddch0-supply = <&vreg_l10c_3p3>; + max-speed = <3200000>; + }; +}; + +&uart8 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + + usb_hub_2_x: hub@1 { + compatible = "usbbda,5411"; + reg = <1>; + peer-hub = <&usb_hub_3_x>; + }; + + usb_hub_3_x: hub@2 { + compatible = "usbbda,411"; + reg = <2>; + peer-hub = <&usb_hub_2_x>; + }; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l4a_0p8>; + vdda-pll-supply = <&vreg_l11a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l17a_3p0>; + qcom,imp-res-offset-value = <8>; + qcom,preemphasis-level = ; + qcom,preemphasis-width = ; + qcom,bias-ctrl-value = <0x22>; + qcom,charge-ctrl-value = <3>; + qcom,hsdisc-trim-value = <0>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l4a_0p8>; + + status = "okay"; +}; + +&venus { + firmware-name = "qcom/sc7180/acer/aspire1/qcvss7180.mbn"; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>; + vdd-1.8-xo-supply = <&vreg_l1c_1p8>; + vdd-1.3-rfa-supply = <&vreg_l2c_1p3>; + vdd-3.3-ch0-supply = <&vreg_l10c_3p3>; + vdd-3.3-ch1-supply = <&vreg_l11c_3p3>; + + status = "okay"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm6150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s1a_1p1: smps1 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_l4a_0p8: ldo4 { + regulator-min-microvolt = <824000>; + regulator-max-microvolt = <928000>; + regulator-initial-mode = ; + }; + + vreg_l9a_0p6: ldo9 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-always-on; + regulator-boot-on; + }; + + vreg_l11a_1p8: ldo11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l13a_1p8: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vreg_l17a_3p0: ldo17 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + regulator-initial-mode = ; + }; + + vreg_l18a_2p8: ldo18 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vreg_l19a_2p9: ldo19 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + }; + + regulators-1 { + compatible = "qcom,pm6150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1120000>; + regulator-max-microvolt = <1408000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1616000>; + regulator-max-microvolt = <1984000>; + regulator-initial-mode = ; + }; + + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1168000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1144000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-initial-mode = ; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <2952000>; + regulator-initial-mode = ; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = ; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = ; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + }; +}; + +&qup_i2c2_default { + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; +}; + +&qup_i2c4_default { + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; +}; + +&qup_i2c9_default { + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; +}; + +&qup_i2c10_default { + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; +}; + +&tlmm { + /* + * The TZ seem to protect those because some boards can have + * fingerprint sensor connected to this range. Not connected + * on this board + */ + gpio-reserved-ranges = <58 5>; + + amp_sd_mode_default: amp-sd-mode-deault-state { + pins = "gpio23"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + bridge_en_default: bridge-en-default-state { + pins = "gpio51"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + bridge_suspend_default: bridge-suspend-default-state { + pins = "gpio22"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; + + codec_irq_default: codec-irq-deault-state { + pins = "gpio28"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + edp_bridge_irq_default: edp-bridge-irq-default-state { + pins = "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + hid_keyboard_default: hid-keyboard-default-state { + pins = "gpio33"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + hid_touchpad_default: hid-touchpad-default-state { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart3_sleep: qup-uart3-sleep-state { + cts-pins { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + pins = "gpio38"; + function = "gpio"; + bias-pull-down; + }; + + rts-pins { + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + pins = "gpio39"; + function = "gpio"; + bias-pull-down; + }; + + tx-pins { + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + pins = "gpio40"; + function = "gpio"; + bias-pull-up; + }; + + rx-pins { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + pins = "gpio41"; + function = "gpio"; + bias-pull-up; + }; + }; + + reg_edp_1p2_en_default: reg-edp-1p2-en-deault-state { + pins = "gpio19"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + reg_edp_1p8_en_default: reg-edp-1p8-en-deault-state { + pins = "gpio20"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + reg_lcm_en_default: reg-lcm-en-deault-state { + pins = "gpio26"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + reg_audio_en_default: reg-audio-en-deault-state { + pins = "gpio83"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + reg_tp_en_default: reg-tp-en-deault-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + soc_bkoff_default: soc-bkoff-deault-state { + pins = "gpio10"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + sdc1_default: sdc1-default-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <16>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <16>; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_sleep: sdc1-sleep-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + ter_mi2s_active: ter-mi2s-active-state { + pins = "gpio63", "gpio64", "gpio65"; + function = "mi2s_2"; + }; +};