From patchwork Wed Apr 5 15:50:30 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 671636 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 74531C77B60 for ; Wed, 5 Apr 2023 15:51:20 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239111AbjDEPvT (ORCPT ); Wed, 5 Apr 2023 11:51:19 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:37180 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239116AbjDEPvG (ORCPT ); Wed, 5 Apr 2023 11:51:06 -0400 Received: from mail-lf1-x12a.google.com (mail-lf1-x12a.google.com [IPv6:2a00:1450:4864:20::12a]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A4DFE6A7B for ; Wed, 5 Apr 2023 08:50:58 -0700 (PDT) Received: by mail-lf1-x12a.google.com with SMTP id y15so47236043lfa.7 for ; Wed, 05 Apr 2023 08:50:58 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1680709856; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=2V+//3qTRfFc+qesLfjECY8KgEgnYIKHLOTmqMjRH5c=; b=yOIQlCoGLLRMd0MCmdFYsvIBSkIOKodtOVe2CbnKWndNGqtHaM4S7t24GhUWQBJef9 g4gmZFojqthXo9Yw4mX7M2+lzZ8YqZaYEpRWek+3NgYHdlQ/KSo3VSIzX5sYyxMph9TN 71DPSEJkhOveg3FyVvTd3Hragn+y7+s68NhoATER1LBnEyE4vX2yOFo3bFELC9bxV34K vBY3PlynFCr/G1zhAi15IaoJvGHDHznRwDRSkD+w4wJry3ppDCu5ts/CJDHET086o4d8 2/IM5CDwAI6qFcmpzNP/iud01hwLER0LqbKmHioESDkF6ZBkow0evvmZLvPfdUEG9ZoW a7WQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; t=1680709856; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=2V+//3qTRfFc+qesLfjECY8KgEgnYIKHLOTmqMjRH5c=; b=04M9TeCrQG3rej0k8wDB/WEhJW2aRfberJT42dyGfU9/3olGwLTUgRVS6BSUukCuOe QUwv48EmlUJNBdvliTWRosTaxYM0bEo2JofVmqS7J5tnhrcxYGDM9SZdm+du7zm6u4Qf 6HwSr7AVXD4WOqUcQgrwOGIMfY67zB4bborXOAJK/jQomx5iUwk6B5UXXsfpY5wIBetv UFFz5+8aZ3To7HrxtDv0PrpnVYPqSAJC5tyECRuHDn9vtrGsEunX9/B2pXPjLkiteCPd O0HSaczIThRmXy2LeuQCksNtcxs9TNVH2krcuL6ApayKs28ifu78WA+mpu0vtUYU6nbt 8pqw== X-Gm-Message-State: AAQBX9fuCNHTJjHy8EsbFnR2eo2g6hysRalO8GuUEBqPXdm5/9ATBYt9 Qmir+asxElptbgz2XwjWrMj56yv+Un5mwmGXzZ8= X-Google-Smtp-Source: AKy350YvUrKb1ng1AX2KabnQcR5gCfWOoQV5dLrPuM7el0H9QJYKsgv51Pu86Iba2vbavkl5loVMjQ== X-Received: by 2002:ac2:55a4:0:b0:4e2:337d:65d3 with SMTP id y4-20020ac255a4000000b004e2337d65d3mr1632694lfg.40.1680709856665; Wed, 05 Apr 2023 08:50:56 -0700 (PDT) Received: from [192.168.1.101] (abxh37.neoplus.adsl.tpnet.pl. [83.9.1.37]) by smtp.gmail.com with ESMTPSA id o28-20020ac2495c000000b004eb2db994e7sm2869344lfi.239.2023.04.05.08.50.55 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 05 Apr 2023 08:50:56 -0700 (PDT) From: Konrad Dybcio Date: Wed, 05 Apr 2023 17:50:30 +0200 Subject: [PATCH v2 1/5] dt-bindings: firmware: document Qualcomm QCM2290 SCM MIME-Version: 1.0 Message-Id: <20230403-topic-rb1_qcm-v2-1-dae06f8830dc@linaro.org> References: <20230403-topic-rb1_qcm-v2-0-dae06f8830dc@linaro.org> In-Reply-To: <20230403-topic-rb1_qcm-v2-0-dae06f8830dc@linaro.org> To: Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Robert Marko , Das Srinagesh Cc: Bhupesh Sharma , Vladimir Zapolskiy , Marijn Suijten , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Konrad Dybcio , Krzysztof Kozlowski X-Mailer: b4 0.12.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1680709854; l=1346; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=6P3gasE9HThpbkJ1H0jL6BprGLBwZW+LMCHOpIgamGE=; b=yLE4K4siLVQtQF1Yk5ZlF/2gvKl7bnU6LOupzvdjI8M7IFmvt65md1dVf7F7tMYUsqKrf6gge9FN nrrK5sQtANxJuX3SE+7PeFt92TZwrNUa9K993o7PiYPgekhSqZNm X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add a compatible for Qualcomm QCM2290 SCM and add it to the core clock users list. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Konrad Dybcio --- Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml index 543feb3b6c58..35540f292bfd 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml @@ -40,6 +40,7 @@ properties: - qcom,scm-msm8994 - qcom,scm-msm8996 - qcom,scm-msm8998 + - qcom,scm-qcm2290 - qcom,scm-qdu1000 - qcom,scm-sa8775p - qcom,scm-sc7180 @@ -109,6 +110,7 @@ allOf: - qcom,scm-msm8960 - qcom,scm-msm8974 - qcom,scm-msm8976 + - qcom,scm-qcm2290 - qcom,scm-sm6375 then: required: @@ -127,6 +129,7 @@ allOf: - qcom,scm-apq8064 - qcom,scm-msm8660 - qcom,scm-msm8960 + - qcom,scm-qcm2290 - qcom,scm-sm6375 then: properties: From patchwork Wed Apr 5 15:50:31 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 671635 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id DAC63C7619A for ; Wed, 5 Apr 2023 15:51:22 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239045AbjDEPvV (ORCPT ); Wed, 5 Apr 2023 11:51:21 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:36628 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239120AbjDEPvH (ORCPT ); Wed, 5 Apr 2023 11:51:07 -0400 Received: from mail-lf1-x133.google.com (mail-lf1-x133.google.com [IPv6:2a00:1450:4864:20::133]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 0CC406EAF for ; Wed, 5 Apr 2023 08:51:00 -0700 (PDT) Received: by mail-lf1-x133.google.com with SMTP id q16so47230440lfe.10 for ; Wed, 05 Apr 2023 08:50:59 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1680709858; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=VoZW/t2NItn4c5+IARY96OyebrrhmrilS2i/y95RELk=; b=S1xQ05RpN0xuL2zhRUG3HJrXGOw12SWrnx2XMG+rj9mmgum/mk+AXF8na+i9idRvzw x5faXylMxXxzKRsx8QbQUxmE3HqBb/Omi2TwQgJoXvJxxYrLO9qQiwYBoC87gG4VEKXg /Xxhakdq8A2BjmmScoMjvxvxYIm093kW+A9g2iyg+mCvP800DVvWyBYKXMs34ZS00uui WSryiWKIk8Am9+o0coX8SbtcjHc9m7Rx9Hqf330y7zZwUnVaqcTtUCBIi0QSH178e6Uh UNMuh5JxTKyAMgRmFFN+vG/3vA3Hjiap9TVpL7JbO3XE+q6lDjX0VceGJCl8SakAGJdZ ipTw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; t=1680709858; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=VoZW/t2NItn4c5+IARY96OyebrrhmrilS2i/y95RELk=; b=o6zWO/S4T1aospvMckudqTWwgOMPuSgeP8ThFN/R7WuAk6j+y2eB6mF+DFmf5Cqrp7 07UPcPdrcq4XBj0ibQ80jR4FwW9WHNMrf3ZKxn5xREqI/gDsEJUg2bauJyTJYTG4c7zt bFpRnoVjcwBjHN9DclQLDcCN9pa69dmfDjHZhxCvaOG5Hc5GFtIgivB9wjsXXYOgsEzL AxnHEblV1YgXDT5xGkAtW2XLhGVO5yx0AA3J8nmEpFg9a7yA2qUCW0SC1pJk7JiGqFhU z/AdwI/5akCh0b84EQqLVLjGZ98FsLAbm+CxWeSq+E9wGpyOtfvQIZb3i5sP9Q4yO99H eCag== X-Gm-Message-State: AAQBX9fSplEeu0dlQ1D5f2w7ghqvdDuD3sRDsI6S4hJZ9GOpnzqw+TxH xQEVDe8F9q6OaCWZbcWkwtERTyBgwrMr+eq0GeE= X-Google-Smtp-Source: AKy350Y1Bw7EutpOHVvL5IBL1dJieZOl38J+eRPSAGtQCQ4OlkiZWaXHwu2RwepGMJ0EyA8eFdTwZQ== X-Received: by 2002:ac2:5ed9:0:b0:4e0:fe29:9313 with SMTP id d25-20020ac25ed9000000b004e0fe299313mr1820725lfq.15.1680709857935; Wed, 05 Apr 2023 08:50:57 -0700 (PDT) Received: from [192.168.1.101] (abxh37.neoplus.adsl.tpnet.pl. [83.9.1.37]) by smtp.gmail.com with ESMTPSA id o28-20020ac2495c000000b004eb2db994e7sm2869344lfi.239.2023.04.05.08.50.56 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 05 Apr 2023 08:50:57 -0700 (PDT) From: Konrad Dybcio Date: Wed, 05 Apr 2023 17:50:31 +0200 Subject: [PATCH v2 2/5] dt-bindings: arm: qcom: Add QRB2210/QCM2290 and RB1 board MIME-Version: 1.0 Message-Id: <20230403-topic-rb1_qcm-v2-2-dae06f8830dc@linaro.org> References: <20230403-topic-rb1_qcm-v2-0-dae06f8830dc@linaro.org> In-Reply-To: <20230403-topic-rb1_qcm-v2-0-dae06f8830dc@linaro.org> To: Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Robert Marko , Das Srinagesh Cc: Bhupesh Sharma , Vladimir Zapolskiy , Marijn Suijten , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Konrad Dybcio X-Mailer: b4 0.12.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1680709854; l=1143; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=e/aVB5KX0++ON0sWAeEBxlEotAP8vaegj0zHbRUzB44=; b=GCaSsMsrKx9f3J6VX+j3xO8cxs2hMPCN0xXx9TKY4GezxSoDUXGB0cJdON4CPF2B63ClQaq8i+Cl F+Y/O6jrDVoDSKmjheRZI8HYNjKCrjRiv7TAMJIu5zCZGpMlrAal X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Document QRB210, a QRB version of QCM2290. Document QTI Robotics RB1 as a QRB2210 device. Signed-off-by: Konrad Dybcio --- Documentation/devicetree/bindings/arm/qcom.yaml | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 05badce5fedc..236ea55aee96 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -47,6 +47,8 @@ description: | msm8996 msm8998 qcs404 + qcm2290 + qrb2210 qdu1000 qru1000 sa8155p @@ -353,6 +355,13 @@ properties: - const: swir,wp8548 - const: qcom,mdm9615 + - description: Qualcomm Technologies, Inc. Robotics RB1 + items: + - enum: + - qcom,qrb2210-rb1 + - const: qcom,qrb2210 + - const: qcom,qcm2290 + - description: Qualcomm Technologies, Inc. Distributed Unit 1000 platform items: - enum: From patchwork Wed Apr 5 15:50:32 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 670426 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id E1874C77B6C for ; Wed, 5 Apr 2023 15:51:35 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239027AbjDEPve (ORCPT ); Wed, 5 Apr 2023 11:51:34 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:38372 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239143AbjDEPvM (ORCPT ); Wed, 5 Apr 2023 11:51:12 -0400 Received: from mail-lf1-x134.google.com (mail-lf1-x134.google.com [IPv6:2a00:1450:4864:20::134]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 05029559A for ; Wed, 5 Apr 2023 08:51:02 -0700 (PDT) Received: by mail-lf1-x134.google.com with SMTP id h11so40279254lfu.8 for ; Wed, 05 Apr 2023 08:51:01 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1680709860; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=POQhVek2U67TEE4v90nENW3eLneoDYBmSmHKrlERIJY=; b=HeOZ4DOIe1jS0gC5QcTD0IgOxfl4nuBDix3EdCIf2mUIvToJfr6PRlZZV/4gxxG1es q+WHEFghZQSJC6NRlRN/eLULa5X8rEnURQOkIPyF9f8+pUfDeoJSv/Wro01uZxCoqjuh UKXojon2gLzAZmdR/qrskIVgyQLChO1G2sw9QyOFZHQhOnNuXoQPUSzk7iVuBOngRxHj pRdzR1VwbJ1M8oUXT02ecyQZ9kCMRc2gNE6xRgP7J0bMjOg+CCobOZRp+4uw/qhCy2d7 7FyfUOXnKHnIf2Bq5fTYo/xjXw6BZ/4iknNk+mnSlb64g7iGuvIIgUgOIBjrSPfIQf0u tqeg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; t=1680709860; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=POQhVek2U67TEE4v90nENW3eLneoDYBmSmHKrlERIJY=; b=DuXz+HaFgwFNgF29p0a4JuZGmM8Hh5GOM0YhPJlabaSHXiPRTzcmb05S6zx2YL4PQ/ WJ92FGEqIhCAqb49DmiI14n6hahvwQnyGtvQms/Q/j3IBcBIBPxZtZjMDqiB+Cg8/79t ymvFrbKw6p5y4W84RDwD2gqBiUKM/BsL+YYhA3+LXNyGcW3qABHme3STVZLbqjcb00U5 1r3QgYWfOL4T4Bc5vVec+IKZNItGHZzW3jSz3xKo08vqTOj8O5CZGu3jO1bKZciIRzkX GOngxKIlyaqbPmqOzH7IStJ97afiBB0TOvqia/6rIdYP0W+jQJAVu9TPKPoI0NGkaCh3 6vQA== X-Gm-Message-State: AAQBX9ffDP9EckiihYRGwb5c0s3MDyks4gDMq2C8HHctxoFyxZozsSXo rwlrHtuIvd1ClOHzQA7U4BOvyD97Qs8GCg+46Zg= X-Google-Smtp-Source: AKy350YQf8FRx3rhwqXiFeV/4xXSGw1EFaKVrhqlaQxvg6Mya/ZU1OBh7kdYat3Y71IXvqcsp92uGg== X-Received: by 2002:ac2:4dab:0:b0:4d5:978e:8bcf with SMTP id h11-20020ac24dab000000b004d5978e8bcfmr1764543lfe.33.1680709859493; Wed, 05 Apr 2023 08:50:59 -0700 (PDT) Received: from [192.168.1.101] (abxh37.neoplus.adsl.tpnet.pl. [83.9.1.37]) by smtp.gmail.com with ESMTPSA id o28-20020ac2495c000000b004eb2db994e7sm2869344lfi.239.2023.04.05.08.50.58 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 05 Apr 2023 08:50:59 -0700 (PDT) From: Konrad Dybcio Date: Wed, 05 Apr 2023 17:50:32 +0200 Subject: [PATCH v2 3/5] arm64: dts: qcom: Add initial QCM2290 device tree MIME-Version: 1.0 Message-Id: <20230403-topic-rb1_qcm-v2-3-dae06f8830dc@linaro.org> References: <20230403-topic-rb1_qcm-v2-0-dae06f8830dc@linaro.org> In-Reply-To: <20230403-topic-rb1_qcm-v2-0-dae06f8830dc@linaro.org> To: Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Robert Marko , Das Srinagesh Cc: Bhupesh Sharma , Vladimir Zapolskiy , Marijn Suijten , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Konrad Dybcio X-Mailer: b4 0.12.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1680709854; l=41838; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=ZLAR0hfE9dCtsdhH5I7NhN016VxthG+bkgn5vsQ7j0c=; b=nGIb+xcNx1DZ01fp7R20JKTNLe26+v27nGLuKnn/j1tn4TbVOuS8UEEH4I5uEEww9k2DLIRzaFu3 pIFoAdl+CFjYD3Revedtw8oXpP1N9hLXLNJV/zri5kLZGeQh8DSH X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add an initial device tree for the QCM2290 low-end SoC, featuring 4 "customized" Cortex-A53 cores and up to 4 GiB of LPDDR(3/4X). This revision brings support for: - TSENS & thermal zones - SDHCI1/2 - I2C, SPI, UART - MPSS - ADSP - Wi-Fi Signed-off-by: Konrad Dybcio --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/qcm2290.dtsi | 1561 +++++++++++++++++++++++++++++++++ 2 files changed, 1562 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 1a29403400b7..6fc8d6664f0c 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -70,6 +70,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb +dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5-vision-mezzanine.dtb dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi new file mode 100644 index 000000000000..ae5abc76bcc7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi @@ -0,0 +1,1561 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2023, Linaro Ltd + * + * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain. + */ + +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32764>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-qcm2290", "qcom,scm"; + clocks = <&rpmcc RPM_SMD_CE1_CLK>; + clock-names = "core"; + #reset-cells = <1>; + }; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x40000000 0 0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hyp@45700000 { + reg = <0x0 0x45700000 0x0 0x600000>; + no-map; + }; + + xbl_aop_mem: xbl-aop@45e00000 { + reg = <0x0 0x45e00000 0x0 0x140000>; + no-map; + }; + + sec_apps_mem: sec-apps@45fff000 { + reg = <0x0 0x45fff000 0x0 0x1000>; + no-map; + }; + + smem_mem: smem@46000000 { + compatible = "qcom,smem"; + reg = <0x0 0x46000000 0x0 0x200000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + }; + + pil_modem_mem: modem@4ab00000 { + reg = <0x0 0x4ab00000 0x0 0x6900000>; + no-map; + }; + + pil_video_mem: video@51400000 { + reg = <0x0 0x51400000 0x0 0x500000>; + no-map; + }; + + wlan_msa_mem: wlan-msa@51900000 { + reg = <0x0 0x51900000 0x0 0x100000>; + no-map; + }; + + pil_adsp_mem: adsp@51a00000 { + reg = <0x0 0x51a00000 0x0 0x1c00000>; + no-map; + }; + + pil_ipa_fw_mem: ipa-fw@53600000 { + reg = <0x0 0x53600000 0x0 0x10000>; + no-map; + }; + + pil_ipa_gsi_mem: ipa-gsi@53610000 { + reg = <0x0 0x53610000 0x0 0x5000>; + no-map; + }; + + pil_gpu_mem: zap@53615000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x53615000 0x0 0x2000>; + no-map; + }; + + cont_splash_memory: framebuffer@5c000000 { + reg = <0x0 0x5c000000 0x0 0x00f00000>; + no-map; + }; + + dfps_data_memory: dpfs-data@5cf00000 { + reg = <0x0 0x5cf00000 0x0 0x0100000>; + no-map; + }; + + removed_mem: reserved@60000000 { + reg = <0x0 0x60000000 0x0 0x3900000>; + no-map; + }; + + rmtfs_mem: memory@89b01000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x89b01000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = ; + }; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + interrupts = ; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-qcm2290"; + qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,qcm2290-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_min_svs: opp1 { + opp-level = ; + }; + + rpmpd_opp_low_svs: opp2 { + opp-level = ; + }; + + rpmpd_opp_svs: opp3 { + opp-level = ; + }; + + rpmpd_opp_svs_plus: opp4 { + opp-level = ; + }; + + rpmpd_opp_nom: opp5 { + opp-level = ; + }; + + rpmpd_opp_nom_plus: opp6 { + opp-level = ; + }; + + rpmpd_opp_turbo: opp7 { + opp-level = ; + }; + + rpmpd_opp_turbo_plus: opp8 { + opp-level = ; + }; + }; + }; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = ; + + mboxes = <&apcs_glb 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = ; + + mboxes = <&apcs_glb 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wlan_smp2p_in: wlan-wpss-to-ap { + qcom,entry-name = "wlan"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + + tcsr_mutex: hwlock@340000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x00340000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + tlmm: pinctrl@500000 { + compatible = "qcom,qcm2290-tlmm"; + reg = <0x0 0x00500000 0x0 0x300000>; + interrupts = ; + gpio-controller; + gpio-ranges = <&tlmm 0 0 127>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio0", "gpio1"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c1_default: qup-i2c1-default-state { + pins = "gpio4", "gpio5"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "qup2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c3_default: qup-i2c3-default-state { + pins = "gpio8", "gpio9"; + function = "qup3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c4_default: qup-i2c4-default-state { + pins = "gpio12", "gpio13"; + function = "qup4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c5_default: qup-i2c5-default-state { + pins = "gpio14", "gpio15"; + function = "qup5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi0_default: qup-spi0-default-state { + pins = "gpio0", "gpio1","gpio2", "gpio3"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi1_default: qup-spi1-default-state { + pins = "gpio4", "gpio5", "gpio69", "gpio70"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi2_default: qup-spi2-default-state { + pins = "gpio6", "gpio7", "gpio71", "gpio80"; + function = "qup2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi3_default: qup-spi3-default-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "qup3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi4_default: qup-spi4-default-state { + pins = "gpio12", "gpio13", "gpio96", "gpio97"; + function = "qup4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi5_default: qup-spi5-default-state { + pins = "gpio14", "gpio15", "gpio16", "gpio17"; + function = "qup5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart0_default: qup-uart0-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "qup0"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart4_default: qup-uart4-default-state { + pins = "gpio12", "gpio13"; + function = "qup4"; + drive-strength = <2>; + bias-disable; + }; + + sdc1_state_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_state_off: sdc1-off-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <2>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_state_on: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_state_off: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; + + gcc: clock-controller@1400000 { + compatible = "qcom,gcc-qcm2290"; + reg = <0x0 0x01400000 0x0 0x1f0000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; + clock-names = "bi_tcxo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + usb_hsphy: phy@1613000 { + compatible = "qcom,qcm2290-qusb2-phy"; + reg = <0x0 0x01613000 0x0 0x180>; + + clocks = <&gcc GCC_AHB2PHY_USB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2_hstx_trim>; + #phy-cells = <0>; + + status = "disabled"; + }; + + qfprom@1b44000 { + compatible = "qcom,qcm2290-qfprom", "qcom,qfprom"; + reg = <0x0 0x01b44000 0x0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2_hstx_trim: hstx-trim@25b { + reg = <0x25b 0x1>; + bits = <1 4>; + }; + }; + + spmi_bus: spmi@1c40000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x01c40000 0x0 0x1100>, + <0x0 0x01e00000 0x0 0x2000000>, + <0x0 0x03e00000 0x0 0x100000>, + <0x0 0x03f00000 0x0 0xa0000>, + <0x0 0x01c0a000 0x0 0x26000>; + reg-names = "core", + "chnls", + "obsrvr", + "intr", + "cnfg"; + interrupts = ; + interrupt-names = "periph_irq"; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tsens0: thermal-sensor@4411000 { + compatible = "qcom,qcm2290-tsens", "qcom,tsens-v2"; + reg = <0x0 0x04411000 0x0 0x1ff>, + <0x0 0x04410000 0x0 0x8>; + #qcom,sensors = <10>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + rng: rng@4453000 { + compatible = "qcom,prng-ee"; + reg = <0x0 0x04453000 0x0 0x1000>; + clocks = <&rpmcc RPM_SMD_HWKM_CLK>; + clock-names = "core"; + }; + + rpm_msg_ram: sram@45f0000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x0 0x045f0000 0x0 0x7000>; + }; + + sram@4690000 { + compatible = "qcom,rpm-stats"; + reg = <0x0 0x04690000 0x0 0x10000>; + }; + + sdhc_1: mmc@4744000 { + compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x04744000 0x0 0x1000>, + <0x0 0x04745000 0x0 0x1000>, + <0x0 0x04748000 0x0 0x8000>; + reg-names = "hc", + "cqhci", + "ice"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_SDCC1_ICE_CORE_CLK>; + clock-names = "iface", + "core", + "xo", + "ice"; + + resets = <&gcc GCC_SDCC1_BCR>; + + power-domains = <&rpmpd QCM2290_VDDCX>; + iommus = <&apps_smmu 0xc0 0x0>; + + qcom,dll-config = <0x000f642c>; + qcom,ddr-config = <0x80040868>; + bus-width = <8>; + + status = "disabled"; + }; + + sdhc_2: mmc@4784000 { + compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x04784000 0x0 0x1000>; + reg-names = "hc"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "core", + "xo"; + + resets = <&gcc GCC_SDCC2_BCR>; + + power-domains = <&rpmpd QCM2290_VDDCX>; + operating-points-v2 = <&sdhc2_opp_table>; + iommus = <&apps_smmu 0xa0 0x0>; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + bus-width = <4>; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + }; + }; + + gpi_dma0: dma-controller@4a00000 { + compatible = "qcom,qcm2290-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0x04a00000 0x0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + ; + dma-channels = <10>; + dma-channel-mask = <0x1f>; + iommus = <&apps_smmu 0xf6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_0: geniqup@4ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x04ac0000 0x0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0xe3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c0: i2c@4a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a80000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c0_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@4a80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a80000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi0_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart0: serial@4a80000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a80000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart0_default>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c1: i2c@4a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a84000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c1_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@4a84000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a84000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi1_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@4a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a88000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c2_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@4a88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a88000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi2_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@4a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a8c000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c3_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@4a8c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a8c000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi3_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@4a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a90000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c4_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@4a90000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a90000 0x0 0x4000>; + interrupts = ; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_default>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart4: serial@4a90000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a90000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart4_default>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c5: i2c@4a94000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a94000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c5_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@4a94000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a94000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi5_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usb: usb@4ef8800 { + compatible = "qcom,qcm2290-dwc3", "qcom,dwc3"; + reg = <0x0 0x04ef8800 0x0 0x400>; + interrupts = , + ; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <133333333>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + wakeup-source; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_dwc3: usb@4e00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x04e00000 0x0 0xcd00>; + interrupts = ; + phys = <&usb_hsphy>; + phy-names = "usb2-phy"; + iommus = <&apps_smmu 0x120 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; + + remoteproc_mpss: remoteproc@6080000 { + compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas"; + reg = <0x0 0x06080000 0x0 0x100>; + + interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd QCM2290_VDDCX>; + + memory-region = <&pil_modem_mem>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "mpss"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 12>; + }; + }; + + remoteproc_adsp: remoteproc@ab00000 { + compatible = "qcom,qcm2290-adsp-pas", "qcom,sm6115-adsp-pas"; + reg = <0x0 0x0ab00000 0x0 0x100>; + + interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd QCM2290_VDD_LPI_CX>, + <&rpmpd QCM2290_VDD_LPI_MX>; + + memory-region = <&pil_adsp_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apcs_glb 8>; + }; + }; + + apps_smmu: iommu@c600000 { + compatible = "qcom,qcm2290-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x0c600000 0x0 0x80000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + wifi: wifi@c800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0x0 0x0c800000 0x0 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_msa_mem>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + iommus = <&apps_smmu 0x1a0 0x1>; + qcom,msa-fixed-perm; + status = "disabled"; + }; + + watchdog@f017000 { + compatible = "qcom,apss-wdt-qcm2290", "qcom,kpss-wdt"; + reg = <0x0 0x0f017000 0x0 0x1000>; + interrupts = , + ; + clocks = <&sleep_clk>; + }; + + apcs_glb: mailbox@f111000 { + compatible = "qcom,qcm2290-apcs-hmss-global"; + reg = <0x0 0x0f111000 0x0 0x1000>; + #mbox-cells = <1>; + }; + + timer@f120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x0f120000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x0f121000 0x8000>; + + frame@0 { + reg = <0x0 0x1000>, + <0x1000 0x1000>; + interrupts = , + ; + frame-number = <0>; + }; + + frame@2000 { + reg = <0x2000 0x1000>; + interrupts = ; + frame-number = <1>; + status = "disabled"; + }; + + frame@3000 { + reg = <0x3000 0x1000>; + interrupts = ; + frame-number = <2>; + status = "disabled"; + }; + + frame@4000 { + reg = <0x4000 0x1000>; + interrupts = ; + frame-number = <3>; + status = "disabled"; + }; + + frame@5000 { + reg = <0x5000 0x1000>; + interrupts = ; + frame-number = <4>; + status = "disabled"; + }; + + frame@6000 { + reg = <0x6000 0x1000>; + interrupts = ; + frame-number = <5>; + status = "disabled"; + }; + + frame@7000 { + reg = <0x7000 0x1000>; + interrupts = ; + frame-number = <6>; + status = "disabled"; + }; + }; + + intc: interrupt-controller@f200000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x0f200000 0x0 0x10000>, + <0x0 0x0f300000 0x0 0x100000>; + interrupts = ; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&intc>; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + }; + + cpufreq_hw: cpufreq@f521000 { + compatible = "qcom,qcm2290-cpufreq-hw", "qcom,cpufreq-hw"; + reg = <0x0 0x0f521000 0x0 0x1000>; + reg-names = "freq-domain0"; + interrupts = ; + interrupt-names = "dcvsh-irq-0"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + }; + + thermal-zones { + mapss-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 0>; + + trips { + mapss_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss_crit: mapss-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 1>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + video_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + video_crit: video-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 2>; + + trips { + wlan_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + wlan_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + wlan_crit: wlan-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpuss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss0_crit: cpuss0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpuss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss1_crit: cpuss1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mdm0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 5>; + + trips { + mdm0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm0_crit: mdm0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mdm1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 6>; + + trips { + mdm1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm1_crit: mdm1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 7>; + + trips { + gpu_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_crit: gpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + hm-center-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 8>; + + trips { + hm_center_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + hm_center_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + hm_center_crit: hm-center-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 9>; + + trips { + camera_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + camera_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + camera_crit: camera-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +}; From patchwork Wed Apr 5 15:50:33 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 670427 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id EEA37C77B60 for ; Wed, 5 Apr 2023 15:51:33 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239192AbjDEPvc (ORCPT ); Wed, 5 Apr 2023 11:51:32 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:37844 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239132AbjDEPvL (ORCPT ); Wed, 5 Apr 2023 11:51:11 -0400 Received: from mail-lf1-x130.google.com (mail-lf1-x130.google.com [IPv6:2a00:1450:4864:20::130]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id E3B207281 for ; Wed, 5 Apr 2023 08:51:02 -0700 (PDT) Received: by mail-lf1-x130.google.com with SMTP id c9so36810247lfb.1 for ; Wed, 05 Apr 2023 08:51:02 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1680709861; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=1Jq2avB28NPHNddAO0QR7tlYd/NjJsIY90TgGhkA/74=; b=XPgwlUHM18x/KrRkTMpXMslOgHHHIhLSovEDCYrXnK5+JX2o0TqWqrH+lm6NLFf9Gb GKJBLwe6rWefqV+fpoqdhldJ7ZwyY2Y+wFW3+rVTG4O+OMl3LSfcIrMEJ5XGxrSiP8ZW gJwvwQ6cI19pqubUhX4dlrNImaMjHnmBonadP+LpDwtj+9BKffAnbhQAx163wMjqpkOC MchevxkEnb1aKXY4Tn8c2J1MILRyszyC4htIGK1oVxWqQsQGZxpwQGIZv0gFP2hMvoou orF/X5EwxG90GY0Rg2UkcBrBjsIQAbHdk6fhOSh4fVG+Z42V2c/YEA9IRZhWMIiuE8Ng nt+w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; t=1680709861; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=1Jq2avB28NPHNddAO0QR7tlYd/NjJsIY90TgGhkA/74=; b=WIzHv7alapco5+h5+4/GwEUeY8TuC2N8/AefgMW/m4rSPvnlxuG4ovDRFUnD3eD+qi NpBtZf6+ngAAe6KLSApEi1cKwcRH3qmcj71QW8eZshHp/GFDg4TQa4CPrTErBQwwYmqH zQkfbnTPyyxadh5oXljeVyCuvk74X1fYJxOMGMZeFlgCguH4Hb5dKKB8WvTuEP5nyLsU wtxNeJuEf7r3ZkBVeo5kStmcYB7iVZ982r7cPvHCEvafjpE5tDtpz8TnFZtti9NBc5m9 X77N6fZq/jufG6FYJ3xlN47I/sao/AUKC5jn2OKnbr1YKQq8LOTgElOlDVa+ZL2jBaKM qBgQ== X-Gm-Message-State: AAQBX9fuAPnzEB98oOhJd9lhPz1by10f/tQh9MVhYw9ZNrTcd72rNUNB yGfc/MfRGYUEDSr7Xt0drsBEkA4Z73WPzHV+uKQ= X-Google-Smtp-Source: AKy350YOCVp0/gwgNozBafX6g1sEowVHwS+jvygNQT3B2+EpQ7RHHOduqZspWuG54cBXgHLjWVX//w== X-Received: by 2002:a19:ae10:0:b0:4e9:afb3:d56a with SMTP id f16-20020a19ae10000000b004e9afb3d56amr1885235lfc.7.1680709860966; Wed, 05 Apr 2023 08:51:00 -0700 (PDT) Received: from [192.168.1.101] (abxh37.neoplus.adsl.tpnet.pl. [83.9.1.37]) by smtp.gmail.com with ESMTPSA id o28-20020ac2495c000000b004eb2db994e7sm2869344lfi.239.2023.04.05.08.50.59 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 05 Apr 2023 08:51:00 -0700 (PDT) From: Konrad Dybcio Date: Wed, 05 Apr 2023 17:50:33 +0200 Subject: [PATCH v2 4/5] arm64: dts: qcom: Add initial PM2250 device tree MIME-Version: 1.0 Message-Id: <20230403-topic-rb1_qcm-v2-4-dae06f8830dc@linaro.org> References: <20230403-topic-rb1_qcm-v2-0-dae06f8830dc@linaro.org> In-Reply-To: <20230403-topic-rb1_qcm-v2-0-dae06f8830dc@linaro.org> To: Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Robert Marko , Das Srinagesh Cc: Bhupesh Sharma , Vladimir Zapolskiy , Marijn Suijten , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Konrad Dybcio X-Mailer: b4 0.12.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1680709854; l=2091; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=XmYfveQ8qrj0CLWV3Vu/9OMSY6RU4NB/qR/vQb3iO3s=; b=cR6VOomLQzZGKc6BgTbCdvKPXWiONH+/uNHL6VACgn/+XF2iFq2QOCVRhIib6rje6FFcLTWbhgaa PPWAcf/2CCvUA24LuC1Yt8WSe7AiGl+mhIDSrFXmwj1yYED0k10u X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Introduce an initial device tree for the PM2250 (sometimes known as PM4125) PMIC. Signed-off-by: Konrad Dybcio --- arch/arm64/boot/dts/qcom/pm2250.dtsi | 63 ++++++++++++++++++++++++++++++++++++ 1 file changed, 63 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/pm2250.dtsi b/arch/arm64/boot/dts/qcom/pm2250.dtsi new file mode 100644 index 000000000000..5f1d15db5c99 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm2250.dtsi @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2023, Linaro Ltd + */ + +#include +#include +#include +#include + +&spmi_bus { + pmic@0 { + compatible = "qcom,pm2250", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x800>; + + pm2250_pwrkey: pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts-extended = <&spmi_bus 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + linux,code = ; + debounce = <15625>; + bias-pull-up; + }; + + pm2250_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts-extended = <&spmi_bus 0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts-extended = <&spmi_bus 0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pm2250_gpios: gpio@c000 { + compatible = "qcom,pm2250-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm2250_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@1 { + compatible = "qcom,pm2250", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; From patchwork Wed Apr 5 15:50:34 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 671634 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7CF81C77B70 for ; Wed, 5 Apr 2023 15:51:37 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239080AbjDEPvf (ORCPT ); Wed, 5 Apr 2023 11:51:35 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:38374 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239144AbjDEPvM (ORCPT ); Wed, 5 Apr 2023 11:51:12 -0400 Received: from mail-lf1-x135.google.com (mail-lf1-x135.google.com [IPv6:2a00:1450:4864:20::135]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8D9DB6A4B for ; Wed, 5 Apr 2023 08:51:04 -0700 (PDT) Received: by mail-lf1-x135.google.com with SMTP id g19so34125269lfr.9 for ; Wed, 05 Apr 2023 08:51:04 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1680709862; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=xTfPf29tnwbydeddtxy3rMEnXluAPIWBZ5CTrs3xI8k=; b=sRvVNCsDZ0ZlhWStZ6R8OwsxOo5wOvM6EVbi/fYmhpMgf6y/5RbHqTjt/FlWs3G6cS IAibunnr7ILmsrM6EFVcV2fGLABauuDMk4jc3wrBqgicM59Q/5i6A73k+vYCb2KovdTR L9bW2x0NBA2NSEh+xEyj4xcwfmRuXCBg/FNj40Oio01C8KJ0i6pzD2Zd/AuJbu7wDiAV gE9/RVtZbHxrRBJu25B+bGjH2e04oj3c6t/mLl0jF7hgsaeYKg3euxEfU9JxzZlJEESg nEiRP5UT/9fxYd08j8TdvHIHYy+eA/ExCbNSECEqgv6NYi/EBKEkppWg4dYcCteogTCw DfSQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; t=1680709862; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=xTfPf29tnwbydeddtxy3rMEnXluAPIWBZ5CTrs3xI8k=; b=itz+ZNRek0do7BiBHA+8zgR8HR8lXdQr+rMq/JQlSEwDFiDiJlcnfPbjKC4F7w2Cdw DwEy+JmeAHaQPR7klegVl9CRyhGo/PYLyCEvUgINXUt0pg0i80G/Z5fcgz03R7NWdlcK LVYgvu36OLOyiaBobggH5AGFkwI3cPDB9Teer1Hlzqte5hlOdhzuhbwMpSmALaUOcq3o vtur9cbBao0x46J3WopaOEWlIQGujGiA5FW7/wh2quhNRVFulODmz93BL1dLR4g3ySB5 MTYb7rUc/enR+7fqzmT8bZPrOGzsMiqXBthkKGnaZyGYfzVZe8zXMOaBq0K3iWo/bNW8 b2HQ== X-Gm-Message-State: AAQBX9cW3puySw2Wc2v6emsN/jjbpelzmH3eR5qgJHE86tTO8Tzx9Y97 6GSqJW0Xh2cSZtkN+YM7hZD6ZQMDejdgQ6Vy+7o= X-Google-Smtp-Source: AKy350a7YodObssGQkTdiZ/Au3AWVlkhKV4kmKrtL+Xd9siQb4SnjapbtevtCgjO65JivXWTg+IQCg== X-Received: by 2002:ac2:5d46:0:b0:4ea:e296:fe9e with SMTP id w6-20020ac25d46000000b004eae296fe9emr1647369lfd.9.1680709862348; Wed, 05 Apr 2023 08:51:02 -0700 (PDT) Received: from [192.168.1.101] (abxh37.neoplus.adsl.tpnet.pl. [83.9.1.37]) by smtp.gmail.com with ESMTPSA id o28-20020ac2495c000000b004eb2db994e7sm2869344lfi.239.2023.04.05.08.51.01 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 05 Apr 2023 08:51:02 -0700 (PDT) From: Konrad Dybcio Date: Wed, 05 Apr 2023 17:50:34 +0200 Subject: [PATCH v2 5/5] arm64: dts: qcom: Add initial QTI RB1 device tree MIME-Version: 1.0 Message-Id: <20230403-topic-rb1_qcm-v2-5-dae06f8830dc@linaro.org> References: <20230403-topic-rb1_qcm-v2-0-dae06f8830dc@linaro.org> In-Reply-To: <20230403-topic-rb1_qcm-v2-0-dae06f8830dc@linaro.org> To: Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Robert Marko , Das Srinagesh Cc: Bhupesh Sharma , Vladimir Zapolskiy , Marijn Suijten , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Konrad Dybcio X-Mailer: b4 0.12.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1680709854; l=3548; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=rcgGXCqBpdi+rXuFSqHjCoOhi1FGiWNalz4gX3uEVPQ=; b=XTOsV6pxALvtz+ctQD4JVaAehGJXVPUF3+zvh8TOJ+T75Gy635wEghnJnN7ldIWBcipQaB2KkA2M kZrzxcpxCsaxG0RZ25o1LGSlNsMwpB1/W+XWQmAyFozwSW5Ao6gH X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add an initial device tree for the QTI RB1 development board, based on the QRB2210 (QCM2290 derivative) SoC. This device tree targets the SoM revision 4, a.k.a. the Mass Production SKU. To get a successful boot, run: cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/qrb2210-rb1.dtb >\ .Image.gz-dtb mkbootimg \ --kernel .Image.gz-dtb \ --ramdisk some_initrd \ --output rb1-boot.img \ --pagesize 4096 \ --base 0x8000 \ --cmdline 'some cmdline' fastboot boot rb1-boot.img There's no dtbo or other craziness to worry about. For the best dev experience, you can erase boot and use fastboot boot everytime, so that the bootloader doesn't mess with you. If you have a SoM revision 3 or older (there should be a sticker on it with text like -r00, where r is the revision), you will need to apply this additional diff: aliases { - serial0 = &uart0; + serial0 = &uart4; /* UART connected to the Micro-USB port via a FTDI chip */ - &uart0 { + &uart4 { That should however only concern preproduction boards. Signed-off-by: Konrad Dybcio --- arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 112 +++++++++++++++++++++++++++++++ 1 file changed, 112 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts new file mode 100644 index 000000000000..ef3616093289 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2023, Linaro Ltd + */ + +/dts-v1/; + +#include "qcm2290.dtsi" +#include "pm2250.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. Robotics RB1"; + compatible = "qcom,qrb2210-rb1", "qcom,qrb2210", "qcom,qcm2290"; + + aliases { + serial0 = &uart0; + sdhc1 = &sdhc_1; + sdhc2 = &sdhc_2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-0 = <&key_volp_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = ; + gpios = <&tlmm 96 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; +}; + +&pm2250_resin { + linux,code = ; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc1_state_on>; + pinctrl-1 = <&sdc1_state_off>; + pinctrl-names = "default", "sleep"; + non-removable; + supports-cqe; + no-sdio; + no-sd; + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&sdc2_state_on &sd_det_in_on>; + pinctrl-1 = <&sdc2_state_off &sd_det_in_off>; + pinctrl-names = "default", "sleep"; + no-sdio; + no-mmc; + status = "okay"; +}; + +&tlmm { + sd_det_in_on: sd-det-in-on-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sd_det_in_off: sd-det-in-off-state { + pins = "gpio88"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + key_volp_n: key-volp-n-state { + pins = "gpio96"; + function = "gpio"; + bias-pull-up; + output-disable; + }; +}; + +/* UART connected to the Micro-USB port via a FTDI chip */ +&uart0 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb_hsphy { + status = "okay"; +}; + +&xo_board { + clock-frequency = <38400000>; +};