From patchwork Mon Nov 13 23:35:56 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 744216 Received: from lindbergh.monkeyblade.net (lindbergh.monkeyblade.net [23.128.96.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 62A9E3D988 for ; Mon, 13 Nov 2023 23:36:02 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="ZWk9YWnA" Received: from mail-lj1-x229.google.com (mail-lj1-x229.google.com [IPv6:2a00:1450:4864:20::229]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id BD6DFD6F for ; Mon, 13 Nov 2023 15:36:00 -0800 (PST) Received: by mail-lj1-x229.google.com with SMTP id 38308e7fff4ca-2c742186a3bso63347161fa.1 for ; Mon, 13 Nov 2023 15:36:00 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1699918559; x=1700523359; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=VuNdy95VNpWQjRKNnpzeQQ54Hlq4tpuG2i9HfgCgKck=; b=ZWk9YWnAIILC5S/hmsCw/pV/GPcrxB4VbupyLbglHBtUkXGtEJiJp2K7MC8P7e1Eq4 ZifiLlUgoDrm+byqiQCFGi4APAzigOsPqLer9i26xrkKs9rx5IdkkuteSQhHwtq1YYf5 ISIiK40dBqbzMrMpHXJ71WJnCdDzLwnkrGuteyw8FnlQpPadma591KgjXLrR8Ncrpkww 4m59XyJpMJo6GO5oO9Zmk+GBZQ7g/hfZiGbTLdmUzHt4UH+33R9a6ZtVuT5cNgiS0tqc 8CImP9eJ0CNeAssYb8vWYqedxE6319UZlj4pYbt0y66/ilTU7lG6E39y+qvRqsqmmcTs PDbg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1699918559; x=1700523359; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=VuNdy95VNpWQjRKNnpzeQQ54Hlq4tpuG2i9HfgCgKck=; b=kvaD4UwJw+Ub3+A0P91uyyZbNHWQ7v/u1T7RSxsMVy2NanJEJN8jNmqC17fCAA89M0 SyTsu77V1qhPy8rdg37Lnz8JZZALxLPYK9uloxuF1Yt923/OP0QbBH+zHZ3PyJy86NkP 9O3dNnE1xUgxFkfUcVcUGEqmYPinrWnyjdfexsL3IhaA2u9uF7xgRTF+CmjBth+TejrD SjXxIidZz0KMUFpiS8MgMHUa3nZYIVj8jILSKFpa9lX731fKQNb26QAj2vP2OBO/dZW/ F1eZ8iQMNuT86/UC1Whc5ne9et+D+uLYEYIt5nghx7Ux4S06YW3GvkTwDsSYuQfCgCn8 eWNQ== X-Gm-Message-State: AOJu0YxhHtpj7864jjUIrn+URIQPTZRgLxy5B1aBSn8flN0RJlmURv8v PJziq3eKZdo3LSTHSE2wljUOPA== X-Google-Smtp-Source: AGHT+IH+vpWSTfI+TqOPfDKq76GtSXfLBIVn7t5E38cxEXvkov/kjCBQrBt7VVuzFvyFnuIoPT3IzA== X-Received: by 2002:a2e:1659:0:b0:2c5:169f:ff03 with SMTP id 25-20020a2e1659000000b002c5169fff03mr475738ljw.5.1699918558910; Mon, 13 Nov 2023 15:35:58 -0800 (PST) Received: from [127.0.1.1] ([85.235.12.238]) by smtp.gmail.com with ESMTPSA id 17-20020a2e0611000000b002b70a8478ddsm1202859ljg.44.2023.11.13.15.35.57 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 13 Nov 2023 15:35:58 -0800 (PST) From: Linus Walleij Date: Tue, 14 Nov 2023 00:35:56 +0100 Subject: [PATCH net-next v8 1/9] dt-bindings: net: dsa: Require ports or ethernet-ports Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231114-marvell-88e6152-wan-led-v8-1-50688741691b@linaro.org> References: <20231114-marvell-88e6152-wan-led-v8-0-50688741691b@linaro.org> In-Reply-To: <20231114-marvell-88e6152-wan-led-v8-0-50688741691b@linaro.org> To: Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Russell King , Florian Fainelli , Vladimir Oltean , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , =?utf-8?q?Marek_Beh=C3=BAn?= Cc: Christian Marangi , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, Linus Walleij , Rob Herring , Florian Fainelli , Krzysztof Kozlowski X-Mailer: b4 0.12.4 Bindings using dsa.yaml#/$defs/ethernet-ports specify that a DSA switch node need to have a ports or ethernet-ports subnode, and that is actually required, so add requirements using oneOf. Suggested-by: Rob Herring Acked-by: Florian Fainelli Reviewed-by: Krzysztof Kozlowski Signed-off-by: Linus Walleij --- Documentation/devicetree/bindings/net/dsa/dsa.yaml | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml index 6107189d276a..2abd036578d1 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml @@ -46,4 +46,10 @@ $defs: $ref: dsa-port.yaml# unevaluatedProperties: false +oneOf: + - required: + - ports + - required: + - ethernet-ports + ... From patchwork Mon Nov 13 23:35:57 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 744215 Received: from lindbergh.monkeyblade.net (lindbergh.monkeyblade.net [23.128.96.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 6DEC93D99F for ; Mon, 13 Nov 2023 23:36:03 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="U9ImV95l" Received: from mail-lj1-x231.google.com (mail-lj1-x231.google.com [IPv6:2a00:1450:4864:20::231]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C5214D72 for ; Mon, 13 Nov 2023 15:36:01 -0800 (PST) Received: by mail-lj1-x231.google.com with SMTP id 38308e7fff4ca-2c788f5bf53so54053041fa.2 for ; Mon, 13 Nov 2023 15:36:01 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1699918560; x=1700523360; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=h0VwY6TaHpxI3borUCq3aH1TpiyNiMcQ1rckV7olnsw=; b=U9ImV95lJRVZr6lVFdXEKaSXFGkCDZ218h6yhSrox3gLbV0bWUOruvU4RwaAxTd+k0 348VFN6XDluKPw+FPSzxfmUkVZ5SDbFHVq6TnhPrzL2rvDgqC3Yk8uIMmSGJt4yY+ZjS qFHH2kqgiB2icbDWNWzNCWAHKyazXcA3Ov0AZqOqJTr7EpiF9GIdd0W9JgyakUkLtVpk akWgv8kY7FxI6P39GgRxxtxAUGcEykLIZopolppVm2hbd828Vt6xey58qIymt+9r2BCo aEJhgXUsuMpy3Z7TSM186tZS2TzxblsK46m2NPWH2o8esTbfy/H4P9pvQ6Lk4gCfJl41 wg6w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1699918560; x=1700523360; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=h0VwY6TaHpxI3borUCq3aH1TpiyNiMcQ1rckV7olnsw=; b=NQsNlXBZPG54LQ3526eLfC8222lgEa782UpgbscLuPge1r8PePxs4GWfLzQOryZYnj 1YCAgEBo/G2jbRe4UiDDXVFSjHXnjmAvHbNUN+bzDTviMkpCToW/43ejc6BODRxBH1ob tE7fOq1y5tUHHyuFDna8+C8WdZfH8l2rwzHuEPC5LcgaUbwvojv/k1NVbozZgEvCUhMk hi72WS+Fby9VDKKs2EVxgnQBcvw0YA/cjoEZb+sZ91K7z2FhsHXAAmSMTi7EogyCG0+L 17WMknnP7odqZhq8+L+i5JKq2MUjsQvRr+Plyv2NNC4nkxcrtkt7L9dB0H42tQqOj73v MrFg== X-Gm-Message-State: AOJu0Yxh/HNwbiKKLiniDeK7GzdEclxo7YaOvR8fNEnbGHJaDXHiMu15 M4QpLR2HB79HXRnK439y42aEBwhCsdLIFKDG2BU= X-Google-Smtp-Source: AGHT+IE6N7o4JJ2tj/eDgllrzti0scb8e37t/wSl6LTid0qJhAUkHyoCVWNBKRdo9x/Ix//9+Gy9cQ== X-Received: by 2002:a05:651c:120a:b0:2c8:3b99:7f09 with SMTP id i10-20020a05651c120a00b002c83b997f09mr471644lja.0.1699918560053; Mon, 13 Nov 2023 15:36:00 -0800 (PST) Received: from [127.0.1.1] ([85.235.12.238]) by smtp.gmail.com with ESMTPSA id 17-20020a2e0611000000b002b70a8478ddsm1202859ljg.44.2023.11.13.15.35.59 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 13 Nov 2023 15:35:59 -0800 (PST) From: Linus Walleij Date: Tue, 14 Nov 2023 00:35:57 +0100 Subject: [PATCH net-next v8 2/9] dt-bindings: net: mvusb: Fix up DSA example Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231114-marvell-88e6152-wan-led-v8-2-50688741691b@linaro.org> References: <20231114-marvell-88e6152-wan-led-v8-0-50688741691b@linaro.org> In-Reply-To: <20231114-marvell-88e6152-wan-led-v8-0-50688741691b@linaro.org> To: Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Russell King , Florian Fainelli , Vladimir Oltean , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , =?utf-8?q?Marek_Beh=C3=BAn?= Cc: Christian Marangi , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, Linus Walleij , Vladimir Oltean , Rob Herring , Florian Fainelli X-Mailer: b4 0.12.4 When adding a proper schema for the Marvell mx88e6xxx switch, the scripts start complaining about this embedded example: dtschema/dtc warnings/errors: net/marvell,mvusb.example.dtb: switch@0: ports: '#address-cells' is a required property from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# net/marvell,mvusb.example.dtb: switch@0: ports: '#size-cells' is a required property from schema $id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# Fix this up by extending the example with those properties in the ports node. While we are at it, rename "ports" to "ethernet-ports" and rename "switch" to "ethernet-switch" as this is recommended practice. Reviewed-by: Andrew Lunn Reviewed-by: Vladimir Oltean Reviewed-by: Rob Herring Reviewed-by: Florian Fainelli Signed-off-by: Linus Walleij --- Documentation/devicetree/bindings/net/marvell,mvusb.yaml | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml index 3a3325168048..ab838c1ffeed 100644 --- a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml +++ b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml @@ -50,11 +50,14 @@ examples: #address-cells = <1>; #size-cells = <0>; - switch@0 { + ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0x0>; - ports { + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + /* Port definitions */ }; From patchwork Mon Nov 13 23:35:58 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 743531 Received: from lindbergh.monkeyblade.net (lindbergh.monkeyblade.net [23.128.96.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 697E23E476 for ; Mon, 13 Nov 2023 23:36:05 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="cfIh0ft/" Received: from mail-lj1-x22f.google.com (mail-lj1-x22f.google.com [IPv6:2a00:1450:4864:20::22f]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C67DBD55 for ; Mon, 13 Nov 2023 15:36:02 -0800 (PST) Received: by mail-lj1-x22f.google.com with SMTP id 38308e7fff4ca-2c50cf61f6dso69790581fa.2 for ; Mon, 13 Nov 2023 15:36:02 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1699918561; x=1700523361; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=fFEG72dBWYWsZUqmejoV0kt4Aj1zmT269T2kGi/rvFE=; b=cfIh0ft/c4RPIUf7lgrEzH37Qs67Hx/J/InZB114j91YjRzS2hcKz6GG6h/Qv/80jv JlpacTJOsmWeg5GC5dvaGB3ksAe0EHBEoPG1398VWYLbCBGf0bw8Rjc7hWn27zWDP9dB ytJrmEAx2qeQunna53u8Yk6CAeAZHiBUCTKM6qhbYhrE4Rkv+cnGfiiAQbrLtRvEaMmx H86p+oirK6/xOG20lpu81i72fCRLl+RAHRj6eMJoxAKGMeozof+0FQ2+e3djHGpfL1qg 6pMk+7HjouVIwI8pSqVz6DLkK67UE+DjOzbm2m5KJn+lYRSQlfqmFlDN3PYVy/io+XrK 4cgg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1699918561; x=1700523361; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=fFEG72dBWYWsZUqmejoV0kt4Aj1zmT269T2kGi/rvFE=; b=MvPUdLCSxRG9tJBXLHWl1yFQadcqBivBg+45355hbtD8nt/kpK+H8QPYyH+fStPFzY emh++mqmdlIW0jHVu77fZSvukZLCujs45kowAzM215j5Ig0wtZDSXf5NljlCV1j29Jhq IzcNKLjLMEvE23Hupud8JIb57q3RgXIGn0RI+VmRBAa3t9ajyqy2Fg3ztZJHb7odFEHB vI//IYgret7lj5u/jiFkAeYslb+n22dAKSglfefcE2ffgMG8kESsiBnNlsRpmPeKmdD2 UzXe23KpbuLyfTLM6/wFdiaD5GO3atElPm0Lq5RLd/uaZgteT+PyXsctj1HQxeaQa+7w RFYg== X-Gm-Message-State: AOJu0YzFMLkpgVDWxuZ6N/30G8WHGUih1ErdKPMFqr1+L3mGsiH0xq78 qJUUjoeja3326Di7Nxul/4VhAw== X-Google-Smtp-Source: AGHT+IHsxpzN1LwX0uHjACVOlXRRCh/qdwpBLxQITo7fbX1vKxySCKj4NH7WuHYVQ64JZUrQjBbUMA== X-Received: by 2002:a2e:8849:0:b0:2c8:2e3a:e974 with SMTP id z9-20020a2e8849000000b002c82e3ae974mr563412ljj.44.1699918561110; Mon, 13 Nov 2023 15:36:01 -0800 (PST) Received: from [127.0.1.1] ([85.235.12.238]) by smtp.gmail.com with ESMTPSA id 17-20020a2e0611000000b002b70a8478ddsm1202859ljg.44.2023.11.13.15.36.00 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 13 Nov 2023 15:36:00 -0800 (PST) From: Linus Walleij Date: Tue, 14 Nov 2023 00:35:58 +0100 Subject: [PATCH net-next v8 3/9] ARM: dts: marvell: Fix some common switch mistakes Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231114-marvell-88e6152-wan-led-v8-3-50688741691b@linaro.org> References: <20231114-marvell-88e6152-wan-led-v8-0-50688741691b@linaro.org> In-Reply-To: <20231114-marvell-88e6152-wan-led-v8-0-50688741691b@linaro.org> To: Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Russell King , Florian Fainelli , Vladimir Oltean , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , =?utf-8?q?Marek_Beh=C3=BAn?= Cc: Christian Marangi , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, Linus Walleij , Florian Fainelli X-Mailer: b4 0.12.4 Fix some errors in the Marvell MV88E6xxx switch descriptions: - The top node had no address size or cells. - switch0@0 is not OK, should be ethernet-switch@0. - The ports node should be named ethernet-ports - The ethernet-ports node should have port@0 etc children, no plural "ports" in the children. - Ports should be named ethernet-port@0 etc - PHYs should be named ethernet-phy@0 etc This serves as an example of fixes needed for introducing a schema for the bindings, but the patch can simply be applied. Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: Linus Walleij Reviewed-by: Vladimir Oltean --- arch/arm/boot/dts/marvell/armada-370-rd.dts | 24 ++++++------ .../dts/marvell/armada-381-netgear-gs110emx.dts | 44 +++++++++++----------- .../dts/marvell/armada-385-clearfog-gtr-l8.dts | 38 +++++++++---------- .../dts/marvell/armada-385-clearfog-gtr-s4.dts | 22 +++++------ arch/arm/boot/dts/marvell/armada-385-linksys.dtsi | 18 ++++----- .../boot/dts/marvell/armada-385-turris-omnia.dts | 20 +++++----- arch/arm/boot/dts/marvell/armada-388-clearfog.dts | 20 +++++----- .../boot/dts/marvell/armada-xp-linksys-mamba.dts | 18 ++++----- 8 files changed, 96 insertions(+), 108 deletions(-) diff --git a/arch/arm/boot/dts/marvell/armada-370-rd.dts b/arch/arm/boot/dts/marvell/armada-370-rd.dts index b459a670f615..1b241da11e94 100644 --- a/arch/arm/boot/dts/marvell/armada-370-rd.dts +++ b/arch/arm/boot/dts/marvell/armada-370-rd.dts @@ -149,39 +149,37 @@ led@0 { }; }; - switch: switch@10 { + switch: ethernet-switch@10 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <0x10>; interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "lan0"; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan3"; }; - port@5 { + ethernet-port@5 { reg = <5>; ethernet = <ð1>; phy-mode = "rgmii-id"; @@ -196,25 +194,25 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switchphy0: switchphy@0 { + switchphy0: ethernet-phy@0 { reg = <0>; interrupt-parent = <&switch>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; }; - switchphy1: switchphy@1 { + switchphy1: ethernet-phy@1 { reg = <1>; interrupt-parent = <&switch>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; }; - switchphy2: switchphy@2 { + switchphy2: ethernet-phy@2 { reg = <2>; interrupt-parent = <&switch>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; }; - switchphy3: switchphy@3 { + switchphy3: ethernet-phy@3 { reg = <3>; interrupt-parent = <&switch>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts index f4c4b213ef4e..5baf83e5253d 100644 --- a/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts +++ b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts @@ -77,51 +77,49 @@ &mdio { pinctrl-0 = <&mdio_pins>; status = "okay"; - switch@0 { + ethernet-switch@0 { compatible = "marvell,mv88e6190"; - #address-cells = <1>; #interrupt-cells = <2>; interrupt-controller; interrupt-parent = <&gpio1>; interrupts = <7 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&switch_interrupt_pins>; pinctrl-names = "default"; - #size-cells = <0>; reg = <0>; mdio { #address-cells = <1>; #size-cells = <0>; - switch0phy1: switch0phy1@1 { + switch0phy1: ethernet-phy@1 { reg = <0x1>; }; - switch0phy2: switch0phy2@2 { + switch0phy2: ethernet-phy@2 { reg = <0x2>; }; - switch0phy3: switch0phy3@3 { + switch0phy3: ethernet-phy@3 { reg = <0x3>; }; - switch0phy4: switch0phy4@4 { + switch0phy4: ethernet-phy@4 { reg = <0x4>; }; - switch0phy5: switch0phy5@5 { + switch0phy5: ethernet-phy@5 { reg = <0x5>; }; - switch0phy6: switch0phy6@6 { + switch0phy6: ethernet-phy@6 { reg = <0x6>; }; - switch0phy7: switch0phy7@7 { + switch0phy7: ethernet-phy@7 { reg = <0x7>; }; - switch0phy8: switch0phy8@8 { + switch0phy8: ethernet-phy@8 { reg = <0x8>; }; }; @@ -142,11 +140,11 @@ phy2: ethernet-phy@c { }; }; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { ethernet = <ð0>; phy-mode = "rgmii"; reg = <0>; @@ -158,55 +156,55 @@ fixed-link { }; }; - port@1 { + ethernet-port@1 { label = "lan1"; phy-handle = <&switch0phy1>; reg = <1>; }; - port@2 { + ethernet-port@2 { label = "lan2"; phy-handle = <&switch0phy2>; reg = <2>; }; - port@3 { + ethernet-port@3 { label = "lan3"; phy-handle = <&switch0phy3>; reg = <3>; }; - port@4 { + ethernet-port@4 { label = "lan4"; phy-handle = <&switch0phy4>; reg = <4>; }; - port@5 { + ethernet-port@5 { label = "lan5"; phy-handle = <&switch0phy5>; reg = <5>; }; - port@6 { + ethernet-port@6 { label = "lan6"; phy-handle = <&switch0phy6>; reg = <6>; }; - port@7 { + ethernet-port@7 { label = "lan7"; phy-handle = <&switch0phy7>; reg = <7>; }; - port@8 { + ethernet-port@8 { label = "lan8"; phy-handle = <&switch0phy8>; reg = <8>; }; - port@9 { + ethernet-port@9 { /* 88X3310P external phy */ label = "lan9"; phy-handle = <&phy1>; @@ -214,7 +212,7 @@ port@9 { reg = <9>; }; - port@a { + ethernet-port@a { /* 88X3310P external phy */ label = "lan10"; phy-handle = <&phy2>; diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts index 1990f7d0cc79..1707d1b01545 100644 --- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts +++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts @@ -7,66 +7,66 @@ / { }; &mdio { - switch0: switch0@4 { + switch0: ethernet-switch@4 { compatible = "marvell,mv88e6190"; reg = <4>; pinctrl-names = "default"; pinctrl-0 = <&cf_gtr_switch_reset_pins>; reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan8"; phy-handle = <&switch0phy0>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan7"; phy-handle = <&switch0phy1>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan6"; phy-handle = <&switch0phy2>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "lan5"; phy-handle = <&switch0phy3>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "lan4"; phy-handle = <&switch0phy4>; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "lan3"; phy-handle = <&switch0phy5>; }; - port@7 { + ethernet-port@7 { reg = <7>; label = "lan2"; phy-handle = <&switch0phy6>; }; - port@8 { + ethernet-port@8 { reg = <8>; label = "lan1"; phy-handle = <&switch0phy7>; }; - port@10 { + ethernet-port@10 { reg = <10>; phy-mode = "2500base-x"; @@ -83,35 +83,35 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch0phy0: switch0phy0@1 { + switch0phy0: ethernet-phy@1 { reg = <0x1>; }; - switch0phy1: switch0phy1@2 { + switch0phy1: ethernet-phy@2 { reg = <0x2>; }; - switch0phy2: switch0phy2@3 { + switch0phy2: ethernet-phy@3 { reg = <0x3>; }; - switch0phy3: switch0phy3@4 { + switch0phy3: ethernet-phy@4 { reg = <0x4>; }; - switch0phy4: switch0phy4@5 { + switch0phy4: ethernet-phy@5 { reg = <0x5>; }; - switch0phy5: switch0phy5@6 { + switch0phy5: ethernet-phy@6 { reg = <0x6>; }; - switch0phy6: switch0phy6@7 { + switch0phy6: ethernet-phy@7 { reg = <0x7>; }; - switch0phy7: switch0phy7@8 { + switch0phy7: ethernet-phy@8 { reg = <0x8>; }; }; diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts index b795ad573891..a7678a784c18 100644 --- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts +++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts @@ -11,42 +11,42 @@ &sfp0 { }; &mdio { - switch0: switch0@4 { + switch0: ethernet-switch@4 { compatible = "marvell,mv88e6085"; reg = <4>; pinctrl-names = "default"; pinctrl-0 = <&cf_gtr_switch_reset_pins>; reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan2"; phy-handle = <&switch0phy0>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan1"; phy-handle = <&switch0phy1>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan4"; phy-handle = <&switch0phy2>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "lan3"; phy-handle = <&switch0phy3>; }; - port@5 { + ethernet-port@5 { reg = <5>; phy-mode = "2500base-x"; ethernet = <ð1>; @@ -63,19 +63,19 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch0phy0: switch0phy0@11 { + switch0phy0: ethernet-phy@11 { reg = <0x11>; }; - switch0phy1: switch0phy1@12 { + switch0phy1: ethernet-phy@12 { reg = <0x12>; }; - switch0phy2: switch0phy2@13 { + switch0phy2: ethernet-phy@13 { reg = <0x13>; }; - switch0phy3: switch0phy3@14 { + switch0phy3: ethernet-phy@14 { reg = <0x14>; }; }; diff --git a/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi index fc8216fd9f60..4116ed60f709 100644 --- a/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi @@ -158,42 +158,40 @@ nand: nand@0 { &mdio { status = "okay"; - switch@0 { + ethernet-switch@0 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "lan4"; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan3"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan1"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "wan"; }; - port@5 { + ethernet-port@5 { reg = <5>; phy-mode = "sgmii"; ethernet = <ð2>; diff --git a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts index 2d8d319bec83..7b755bb4e4e7 100644 --- a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts @@ -435,12 +435,10 @@ phy1: ethernet-phy@1 { }; /* Switch MV88E6176 at address 0x10 */ - switch@10 { + ethernet-switch@10 { pinctrl-names = "default"; pinctrl-0 = <&swint_pins>; compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; dsa,member = <0 0>; reg = <0x10>; @@ -448,36 +446,36 @@ switch@10 { interrupt-parent = <&gpio1>; interrupts = <13 IRQ_TYPE_LEVEL_LOW>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - ports@0 { + ethernet-port@0 { reg = <0>; label = "lan0"; }; - ports@1 { + ethernet-port@1 { reg = <1>; label = "lan1"; }; - ports@2 { + ethernet-port@2 { reg = <2>; label = "lan2"; }; - ports@3 { + ethernet-port@3 { reg = <3>; label = "lan3"; }; - ports@4 { + ethernet-port@4 { reg = <4>; label = "lan4"; }; - ports@5 { + ethernet-port@5 { reg = <5>; ethernet = <ð1>; phy-mode = "rgmii-id"; @@ -488,7 +486,7 @@ fixed-link { }; }; - ports@6 { + ethernet-port@6 { reg = <6>; ethernet = <ð0>; phy-mode = "rgmii-id"; diff --git a/arch/arm/boot/dts/marvell/armada-388-clearfog.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts index 32c569df142f..3290ccad2374 100644 --- a/arch/arm/boot/dts/marvell/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts @@ -92,44 +92,42 @@ pcie2-0-w-disable-hog { &mdio { status = "okay"; - switch@4 { + ethernet-switch@4 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <4>; pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>; pinctrl-names = "default"; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "lan5"; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan4"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan3"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan2"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "lan1"; }; - port@5 { + ethernet-port@5 { reg = <5>; ethernet = <ð1>; phy-mode = "1000base-x"; @@ -140,7 +138,7 @@ fixed-link { }; }; - port@6 { + ethernet-port@6 { /* 88E1512 external phy */ reg = <6>; label = "lan6"; diff --git a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts index 7a0614fd0c93..ea859f7ea042 100644 --- a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts @@ -265,42 +265,40 @@ flash@0 { &mdio { status = "okay"; - switch@0 { + ethernet-switch@0 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "lan4"; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan3"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan1"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "internet"; }; - port@5 { + ethernet-port@5 { reg = <5>; phy-mode = "rgmii-id"; ethernet = <ð0>; From patchwork Mon Nov 13 23:35:59 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 744214 Received: from lindbergh.monkeyblade.net (lindbergh.monkeyblade.net [23.128.96.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id EF2233FB01 for ; Mon, 13 Nov 2023 23:36:07 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="v3rQ7EF7" Received: from mail-lj1-x234.google.com (mail-lj1-x234.google.com [IPv6:2a00:1450:4864:20::234]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 02840D71 for ; Mon, 13 Nov 2023 15:36:04 -0800 (PST) Received: by mail-lj1-x234.google.com with SMTP id 38308e7fff4ca-2c5087d19a6so60906351fa.0 for ; Mon, 13 Nov 2023 15:36:03 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1699918562; x=1700523362; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=948RQ39eT96C41vhUgKT9MdtYhGK2zTs/T3B83xBL3Y=; b=v3rQ7EF7X762BteZx2KbDpW69a1DAPR9tcpS+bliF/gltuL7JdfGb6W6MP2y9RGFJm rf1UXovNUHqLDTq9PfNFV6quC/FHM9iw//vurFvtHRGt5bpk4cQT4uyTdzN/Bc6ZFR0X 3MJ+4CKW0P8FEp/UROj/p+8oeqooYZ5GmbmmT6DlZ3ZWinxByArSnh6IaenLGT2I2fTQ UNfJ7jVFJYJp3bO/dmBxWOB9A6QCtXCr6gLyO3o8eD2ktgJp1LVgVoIxN+okXWjeYUQ4 nMtiTzmobmYazuFq4rtX7pFUhwvPqN96nSAHtep/OkGrOm3WXIx9ypMCZ3wltflqw8Nl JiMQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1699918562; x=1700523362; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=948RQ39eT96C41vhUgKT9MdtYhGK2zTs/T3B83xBL3Y=; b=YddFlDCXjvZeZhI3MWYbNP+ywGbWfVCuGQXDJctY15c7cYVupSuHF4JQFx+CxAcsxw YsLiTMGIYo0YDj6GRWHctvXXQoQ7EKejVqE03eh3qeCEIu/h5xv2DHapKlT524Trr5AQ Fyb1FAM2QzJ0qrr6hXjPqkonQ8uiPggY4HopSQUwfabIHLoxxNBKjVtx+Oo8nHDCzTRo hsfwMvisvZhVWEC8ssKwoyD3ELyYffnFWd/GKTLIm9Jop4F5MueEhYyoB8Xfzet/JQ7r jytQCiar6YcUM+0fhq+67//02swzbxTYidzdiXU4XeNIKuzgSb/Qt7RPNTJG6V4FrAhL ASww== X-Gm-Message-State: AOJu0Yya2WU0i8I4bLR6zU/BBySGQ8A2/yYECRCq/X2S8qoNfr3byJKn cJV5Lf1BXJa6LcsfaSnumlw1Pw== X-Google-Smtp-Source: AGHT+IHvd4RbVPyBPbtqmg0nX3ooPWiizrvJakxjJpWlji4MDjIIK+vMmyUkNHofrTihAiRUinaNtQ== X-Received: by 2002:a2e:b0e6:0:b0:2c6:ebfb:dd28 with SMTP id h6-20020a2eb0e6000000b002c6ebfbdd28mr472994ljl.0.1699918562269; Mon, 13 Nov 2023 15:36:02 -0800 (PST) Received: from [127.0.1.1] ([85.235.12.238]) by smtp.gmail.com with ESMTPSA id 17-20020a2e0611000000b002b70a8478ddsm1202859ljg.44.2023.11.13.15.36.01 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 13 Nov 2023 15:36:01 -0800 (PST) From: Linus Walleij Date: Tue, 14 Nov 2023 00:35:59 +0100 Subject: [PATCH net-next v8 4/9] ARM: dts: nxp: Fix some common switch mistakes Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231114-marvell-88e6152-wan-led-v8-4-50688741691b@linaro.org> References: <20231114-marvell-88e6152-wan-led-v8-0-50688741691b@linaro.org> In-Reply-To: <20231114-marvell-88e6152-wan-led-v8-0-50688741691b@linaro.org> To: Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Russell King , Florian Fainelli , Vladimir Oltean , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , =?utf-8?q?Marek_Beh=C3=BAn?= Cc: Christian Marangi , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, Linus Walleij , Florian Fainelli X-Mailer: b4 0.12.4 Fix some errors in the Marvell MV88E6xxx switch descriptions: - switch0@0 is not OK, should be ethernet-switch@0 - ports should be ethernet-ports - port should be ethernet-port - phy should be ethernet-phy Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: Linus Walleij Reviewed-by: Vladimir Oltean --- arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts | 14 ++--- arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts | 70 ++++++++++++------------ arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts | 18 +++--- arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts | 20 +++---- arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts | 18 +++--- 5 files changed, 70 insertions(+), 70 deletions(-) diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts index 1a19aec8957b..7e72f860c3c5 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts @@ -162,7 +162,7 @@ mdio1: mdio { suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6085"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_switch>; @@ -173,26 +173,26 @@ switch0: switch0@0 { interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "eth_cu_1000_1"; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_2"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_1000_3"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_fc_1000_1"; phy-mode = "1000base-x"; @@ -200,7 +200,7 @@ port@5 { sfp = <&sff>; }; - port@6 { + ethernet-port@6 { reg = <6>; phy-mode = "rmii"; ethernet = <&fec1>; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts index df1335492a19..77492eeea450 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts @@ -47,17 +47,17 @@ mdio_mux_1: mdio@1 { #address-cells = <1>; #size-cells = <0>; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 0>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -68,37 +68,37 @@ fixed-link { }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "aib2main_1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "aib2main_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_1000_5"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_cu_1000_6"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_4"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_7"; }; - port@7 { + ethernet-port@7 { reg = <7>; label = "modem_pic"; @@ -108,7 +108,7 @@ fixed-link { }; }; - switch0port10: port@10 { + switch0port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "xgmii"; @@ -130,32 +130,32 @@ mdio_mux_2: mdio@2 { #address-cells = <1>; #size-cells = <0>; - switch1: switch1@0 { + switch1: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 1>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_3"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_100_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_100_3"; }; - switch1port9: port@9 { + switch1port9: ethernet-port@9 { reg = <9>; label = "dsa"; phy-mode = "xgmii"; @@ -168,7 +168,7 @@ fixed-link { }; }; - switch1port10: port@10 { + switch1port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "xgmii"; @@ -188,17 +188,17 @@ mdio_mux_4: mdio@4 { #address-cells = <1>; #size-cells = <0>; - switch2: switch2@0 { + switch2: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 2>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_fc_1000_2"; phy-mode = "1000base-x"; @@ -206,7 +206,7 @@ port@2 { sfp = <&sff1>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_fc_1000_3"; phy-mode = "1000base-x"; @@ -214,7 +214,7 @@ port@3 { sfp = <&sff2>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_fc_1000_4"; phy-mode = "1000base-x"; @@ -222,7 +222,7 @@ port@4 { sfp = <&sff3>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_fc_1000_5"; phy-mode = "1000base-x"; @@ -230,7 +230,7 @@ port@5 { sfp = <&sff4>; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_fc_1000_6"; phy-mode = "1000base-x"; @@ -238,7 +238,7 @@ port@6 { sfp = <&sff5>; }; - port@7 { + ethernet-port@7 { reg = <7>; label = "eth_fc_1000_7"; phy-mode = "1000base-x"; @@ -246,7 +246,7 @@ port@7 { sfp = <&sff6>; }; - port@9 { + ethernet-port@9 { reg = <9>; label = "eth_fc_1000_1"; phy-mode = "1000base-x"; @@ -254,7 +254,7 @@ port@9 { sfp = <&sff0>; }; - switch2port10: port@10 { + switch2port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "2500base-x"; @@ -276,17 +276,17 @@ mdio_mux_8: mdio@8 { #address-cells = <1>; #size-cells = <0>; - switch3: switch3@0 { + switch3: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 3>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_fc_1000_8"; phy-mode = "1000base-x"; @@ -294,7 +294,7 @@ port@2 { sfp = <&sff7>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_fc_1000_9"; phy-mode = "1000base-x"; @@ -302,7 +302,7 @@ port@3 { sfp = <&sff8>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_fc_1000_10"; phy-mode = "1000base-x"; @@ -310,7 +310,7 @@ port@4 { sfp = <&sff9>; }; - switch3port9: port@9 { + switch3port9: ethernet-port@9 { reg = <9>; label = "dsa"; phy-mode = "2500base-x"; @@ -322,7 +322,7 @@ fixed-link { }; }; - switch3port10: port@10 { + switch3port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "xgmii"; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts index 1461804ecaea..2a490464660c 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts @@ -123,7 +123,7 @@ mdio1: mdio { suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -134,11 +134,11 @@ switch0: switch0@0 { interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -149,32 +149,32 @@ fixed-link { }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_1000_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_1000_3"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_cu_1000_4"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_5"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_6"; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts index 463c2452b9b7..078d8699e16d 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts @@ -112,7 +112,7 @@ mdio1: mdio { suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -123,11 +123,11 @@ switch0: switch0@0 { interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -138,27 +138,27 @@ fixed-link { }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_100_3"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_4"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_5"; }; - port@8 { + ethernet-port@8 { reg = <8>; label = "eth_cu_1000_1"; }; - port@9 { + ethernet-port@9 { reg = <9>; label = "eth_cu_1000_2"; phy-handle = <&phy9>; @@ -167,12 +167,12 @@ port@9 { }; }; - mdio1 { + mdio-external { compatible = "marvell,mv88e6xxx-mdio-external"; #address-cells = <1>; #size-cells = <0>; - phy9: phy9@0 { + phy9: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c45"; pinctrl-0 = <&pinctrl_gpio_phy9>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts index f5ae0d5de315..22c8f44390a9 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts @@ -137,7 +137,7 @@ mdio1: mdio { suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -148,11 +148,11 @@ switch0: switch0@0 { interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -163,32 +163,32 @@ fixed-link { }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_1000_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_1000_3"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_cu_1000_4"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_5"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_6"; }; From patchwork Mon Nov 13 23:36:00 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 744213 Received: from lindbergh.monkeyblade.net (lindbergh.monkeyblade.net [23.128.96.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 1D24B3E461 for ; Mon, 13 Nov 2023 23:36:09 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="iRBViyIG" Received: from mail-lj1-x233.google.com (mail-lj1-x233.google.com [IPv6:2a00:1450:4864:20::233]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 3297710D0 for ; Mon, 13 Nov 2023 15:36:05 -0800 (PST) Received: by mail-lj1-x233.google.com with SMTP id 38308e7fff4ca-2c50cf61f6dso69790911fa.2 for ; Mon, 13 Nov 2023 15:36:05 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1699918563; x=1700523363; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=CmeI3rI1EdZ3yymalOF2Lv3t7TF652sPTV2+WklP064=; b=iRBViyIGO646HAQuvzrQK0bsZ0lm7zMjudAPOHELMbImj9t1neO/XVmoMWwYuAbo7D 8uMd81JqdsQzfv3D3tVbB5FyVHLg61gVqQ2FTHYHISa6IwEGjKpY6L2amzQWA2fceVSR rIXS7d1NiHSbft4t4aJcrIaNvlamMmVkfqTCKGZO9QbpnCv/6wNUhqdXvGGqP8iaJS9Z TujVv5Rih2fEWEuiRcU/mtY5QJ/VQ8Zlg2rsi1oJAuR7kr5gnzVyWITGt3iGtBn5cZd8 VO5jCF3BBH5A2NJHC3mRY9pSSQa5brmNx/31Xc4RtaBUNWnRjLkI6qXWpLzyhGl6k/wm zB7g== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1699918563; x=1700523363; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=CmeI3rI1EdZ3yymalOF2Lv3t7TF652sPTV2+WklP064=; b=mRgRv6fwgGi1kmgooyCtyDpCGXh3S/Q/0wnBSYyJROA5lgptMwf76jF3Tda4FTC092 yBSIMNei71fq78PO+IZvgcSY3yEYQd+1f4RCyUHYuygvWt0CddGRhMYxS6AxRSJISQir ox5LixI6pGtp3LA9m32FE99k5N+udv2Qa9id/cOHXfvZlRoT/v9GmCR7ybVakOPxkFO0 IHDR2D2rz0XEfNoSG/PJf1k9qYIreIiFeg7QAUJ0vgJny7mgzJzSib+xHIAehndDZmSf 9rcBYemTNtfX2gFDg/XbCrgsV7RIRcsgDABgwdgPuGhFHmTlecxshgzZ4JyVtFOx771S N59w== X-Gm-Message-State: AOJu0YzFRQ7acnq2DM7TIMNeejjUDRQ8zBPLy9VGIs+Fs7BKO8WtIVE5 vpYQm+156dLSBm2VCiRQ2Iyttw== X-Google-Smtp-Source: AGHT+IEZS4TOYlETVCIWg9lTsb7AozoivIqWDpGhsoNRfe/WjEV3u9PhfS2Cg0B6lwbia/Z/GoJ3Xw== X-Received: by 2002:a2e:1451:0:b0:2c5:4a5:9560 with SMTP id 17-20020a2e1451000000b002c504a59560mr502158lju.41.1699918563431; Mon, 13 Nov 2023 15:36:03 -0800 (PST) Received: from [127.0.1.1] ([85.235.12.238]) by smtp.gmail.com with ESMTPSA id 17-20020a2e0611000000b002b70a8478ddsm1202859ljg.44.2023.11.13.15.36.02 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 13 Nov 2023 15:36:02 -0800 (PST) From: Linus Walleij Date: Tue, 14 Nov 2023 00:36:00 +0100 Subject: [PATCH net-next v8 5/9] ARM64: dts: marvell: Fix some common switch mistakes Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231114-marvell-88e6152-wan-led-v8-5-50688741691b@linaro.org> References: <20231114-marvell-88e6152-wan-led-v8-0-50688741691b@linaro.org> In-Reply-To: <20231114-marvell-88e6152-wan-led-v8-0-50688741691b@linaro.org> To: Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Russell King , Florian Fainelli , Vladimir Oltean , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , =?utf-8?q?Marek_Beh=C3=BAn?= Cc: Christian Marangi , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, Linus Walleij , Florian Fainelli X-Mailer: b4 0.12.4 Fix some errors in the Marvell MV88E6xxx switch descriptions: - The top node had no address size or cells. - switch0@0 is not OK, should be ethernet-switch@0. - ports should be ethernet-ports - port@0 should be ethernet-port@0 - PHYs should be named ethernet-phy@ Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: Linus Walleij --- .../dts/marvell/armada-3720-espressobin-ultra.dts | 14 ++-- .../boot/dts/marvell/armada-3720-espressobin.dtsi | 20 +++-- .../boot/dts/marvell/armada-3720-gl-mv1000.dts | 20 +++-- .../boot/dts/marvell/armada-3720-turris-mox.dts | 85 ++++++++++++---------- .../boot/dts/marvell/armada-7040-mochabin.dts | 24 +++--- .../dts/marvell/armada-8040-clearfog-gt-8k.dts | 22 +++--- arch/arm64/boot/dts/marvell/cn9130-crb.dtsi | 42 +++++------ 7 files changed, 115 insertions(+), 112 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts index f9abef8dcc94..870bb380a40a 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts @@ -126,32 +126,32 @@ &switch0 { reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>; - ports { - switch0port1: port@1 { + ethernet-ports { + switch0port1: ethernet-port@1 { reg = <1>; label = "lan0"; phy-handle = <&switch0phy0>; }; - switch0port2: port@2 { + switch0port2: ethernet-port@2 { reg = <2>; label = "lan1"; phy-handle = <&switch0phy1>; }; - switch0port3: port@3 { + switch0port3: ethernet-port@3 { reg = <3>; label = "lan2"; phy-handle = <&switch0phy2>; }; - switch0port4: port@4 { + switch0port4: ethernet-port@4 { reg = <4>; label = "lan3"; phy-handle = <&switch0phy3>; }; - switch0port5: port@5 { + switch0port5: ethernet-port@5 { reg = <5>; label = "wan"; phy-handle = <&extphy>; @@ -160,7 +160,7 @@ switch0port5: port@5 { }; mdio { - switch0phy3: switch0phy3@14 { + switch0phy3: ethernet-phy@14 { reg = <0x14>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi index 5fc613d24151..86ec0df1c676 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi @@ -145,19 +145,17 @@ &usb2 { }; &mdio { - switch0: switch0@1 { + switch0: ethernet-switch@1 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <1>; dsa,member = <0 0>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - switch0port0: port@0 { + switch0port0: ethernet-port@0 { reg = <0>; label = "cpu"; ethernet = <ð0>; @@ -168,19 +166,19 @@ fixed-link { }; }; - switch0port1: port@1 { + switch0port1: ethernet-port@1 { reg = <1>; label = "wan"; phy-handle = <&switch0phy0>; }; - switch0port2: port@2 { + switch0port2: ethernet-port@2 { reg = <2>; label = "lan0"; phy-handle = <&switch0phy1>; }; - switch0port3: port@3 { + switch0port3: ethernet-port@3 { reg = <3>; label = "lan1"; phy-handle = <&switch0phy2>; @@ -192,13 +190,13 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch0phy0: switch0phy0@11 { + switch0phy0: ethernet-phy@11 { reg = <0x11>; }; - switch0phy1: switch0phy1@12 { + switch0phy1: ethernet-phy@12 { reg = <0x12>; }; - switch0phy2: switch0phy2@13 { + switch0phy2: ethernet-phy@13 { reg = <0x13>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts index b1b45b4fa9d4..63fbc8352161 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts @@ -152,31 +152,29 @@ &uart0 { }; &mdio { - switch0: switch0@1 { + switch0: ethernet-switch@1 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <1>; dsa,member = <0 0>; - ports: ports { + ports: ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "cpu"; ethernet = <ð0>; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "wan"; phy-handle = <&switch0phy0>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan0"; phy-handle = <&switch0phy1>; @@ -185,7 +183,7 @@ port@2 { nvmem-cell-names = "mac-address"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan1"; phy-handle = <&switch0phy2>; @@ -199,13 +197,13 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch0phy0: switch0phy0@11 { + switch0phy0: ethernet-phy@11 { reg = <0x11>; }; - switch0phy1: switch0phy1@12 { + switch0phy1: ethernet-phy@12 { reg = <0x12>; }; - switch0phy2: switch0phy2@13 { + switch0phy2: ethernet-phy@13 { reg = <0x13>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index 9eab2bb22134..66cd98b67744 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -304,7 +304,13 @@ phy1: ethernet-phy@1 { reg = <1>; }; - /* switch nodes are enabled by U-Boot if modules are present */ + /* + * NOTE: switch nodes are enabled by U-Boot if modules are present + * DO NOT change this node name (switch0@10) even if it is not following + * conventions! Deployed U-Boot binaries are explicitly looking for + * this node in order to augment the device tree! + * Also do not touch the "ports" or "port@n" nodes. These are also ABI. + */ switch0@10 { compatible = "marvell,mv88e6190"; reg = <0x10>; @@ -317,35 +323,35 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch0phy1: switch0phy1@1 { + switch0phy1: ethernet-phy@1 { reg = <0x1>; }; - switch0phy2: switch0phy2@2 { + switch0phy2: ethernet-phy@2 { reg = <0x2>; }; - switch0phy3: switch0phy3@3 { + switch0phy3: ethernet-phy@3 { reg = <0x3>; }; - switch0phy4: switch0phy4@4 { + switch0phy4: ethernet-phy@4 { reg = <0x4>; }; - switch0phy5: switch0phy5@5 { + switch0phy5: ethernet-phy@5 { reg = <0x5>; }; - switch0phy6: switch0phy6@6 { + switch0phy6: ethernet-phy@6 { reg = <0x6>; }; - switch0phy7: switch0phy7@7 { + switch0phy7: ethernet-phy@7 { reg = <0x7>; }; - switch0phy8: switch0phy8@8 { + switch0phy8: ethernet-phy@8 { reg = <0x8>; }; }; @@ -430,6 +436,7 @@ port-sfp@a { }; }; + /* NOTE: this node name is ABI, don't change it! */ switch0@2 { compatible = "marvell,mv88e6085"; reg = <0x2>; @@ -442,19 +449,19 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch0phy1_topaz: switch0phy1@11 { + switch0phy1_topaz: ethernet-phy@11 { reg = <0x11>; }; - switch0phy2_topaz: switch0phy2@12 { + switch0phy2_topaz: ethernet-phy@12 { reg = <0x12>; }; - switch0phy3_topaz: switch0phy3@13 { + switch0phy3_topaz: ethernet-phy@13 { reg = <0x13>; }; - switch0phy4_topaz: switch0phy4@14 { + switch0phy4_topaz: ethernet-phy@14 { reg = <0x14>; }; }; @@ -497,6 +504,7 @@ port@5 { }; }; + /* NOTE: this node name is ABI, don't change it! */ switch1@11 { compatible = "marvell,mv88e6190"; reg = <0x11>; @@ -509,35 +517,35 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch1phy1: switch1phy1@1 { + switch1phy1: ethernet-phy@1 { reg = <0x1>; }; - switch1phy2: switch1phy2@2 { + switch1phy2: ethernet-phy@2 { reg = <0x2>; }; - switch1phy3: switch1phy3@3 { + switch1phy3: ethernet-phy@3 { reg = <0x3>; }; - switch1phy4: switch1phy4@4 { + switch1phy4: ethernet-phy@4 { reg = <0x4>; }; - switch1phy5: switch1phy5@5 { + switch1phy5: ethernet-phy@5 { reg = <0x5>; }; - switch1phy6: switch1phy6@6 { + switch1phy6: ethernet-phy@6 { reg = <0x6>; }; - switch1phy7: switch1phy7@7 { + switch1phy7: ethernet-phy@7 { reg = <0x7>; }; - switch1phy8: switch1phy8@8 { + switch1phy8: ethernet-phy@8 { reg = <0x8>; }; }; @@ -622,6 +630,7 @@ port-sfp@a { }; }; + /* NOTE: this node name is ABI, don't change it! */ switch1@2 { compatible = "marvell,mv88e6085"; reg = <0x2>; @@ -634,19 +643,19 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch1phy1_topaz: switch1phy1@11 { + switch1phy1_topaz: ethernet-phy@11 { reg = <0x11>; }; - switch1phy2_topaz: switch1phy2@12 { + switch1phy2_topaz: ethernet-phy@12 { reg = <0x12>; }; - switch1phy3_topaz: switch1phy3@13 { + switch1phy3_topaz: ethernet-phy@13 { reg = <0x13>; }; - switch1phy4_topaz: switch1phy4@14 { + switch1phy4_topaz: ethernet-phy@14 { reg = <0x14>; }; }; @@ -689,6 +698,7 @@ port@5 { }; }; + /* NOTE: this node name is ABI, don't change it! */ switch2@12 { compatible = "marvell,mv88e6190"; reg = <0x12>; @@ -701,35 +711,35 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch2phy1: switch2phy1@1 { + switch2phy1: ethernet-phy@1 { reg = <0x1>; }; - switch2phy2: switch2phy2@2 { + switch2phy2: ethernet-phy@2 { reg = <0x2>; }; - switch2phy3: switch2phy3@3 { + switch2phy3: ethernet-phy@3 { reg = <0x3>; }; - switch2phy4: switch2phy4@4 { + switch2phy4: ethernet-phy@4 { reg = <0x4>; }; - switch2phy5: switch2phy5@5 { + switch2phy5: ethernet-phy@5 { reg = <0x5>; }; - switch2phy6: switch2phy6@6 { + switch2phy6: ethernet-phy@6 { reg = <0x6>; }; - switch2phy7: switch2phy7@7 { + switch2phy7: ethernet-phy@7 { reg = <0x7>; }; - switch2phy8: switch2phy8@8 { + switch2phy8: ethernet-phy@8 { reg = <0x8>; }; }; @@ -805,6 +815,7 @@ port-sfp@a { }; }; + /* NOTE: this node name is ABI, don't change it! */ switch2@2 { compatible = "marvell,mv88e6085"; reg = <0x2>; @@ -817,19 +828,19 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch2phy1_topaz: switch2phy1@11 { + switch2phy1_topaz: ethernet-phy@11 { reg = <0x11>; }; - switch2phy2_topaz: switch2phy2@12 { + switch2phy2_topaz: ethernet-phy@12 { reg = <0x12>; }; - switch2phy3_topaz: switch2phy3@13 { + switch2phy3_topaz: ethernet-phy@13 { reg = <0x13>; }; - switch2phy4_topaz: switch2phy4@14 { + switch2phy4_topaz: ethernet-phy@14 { reg = <0x14>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts index 48202810bf78..40b7ee7ead72 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts @@ -301,10 +301,8 @@ eth2phy: ethernet-phy@1 { }; /* 88E6141 Topaz switch */ - switch: switch@3 { + switch: ethernet-switch@3 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <3>; pinctrl-names = "default"; @@ -314,35 +312,35 @@ switch: switch@3 { interrupt-parent = <&cp0_gpio1>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - swport1: port@1 { + swport1: ethernet-port@1 { reg = <1>; label = "lan0"; phy-handle = <&swphy1>; }; - swport2: port@2 { + swport2: ethernet-port@2 { reg = <2>; label = "lan1"; phy-handle = <&swphy2>; }; - swport3: port@3 { + swport3: ethernet-port@3 { reg = <3>; label = "lan2"; phy-handle = <&swphy3>; }; - swport4: port@4 { + swport4: ethernet-port@4 { reg = <4>; label = "lan3"; phy-handle = <&swphy4>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "cpu"; ethernet = <&cp0_eth1>; @@ -355,19 +353,19 @@ mdio { #address-cells = <1>; #size-cells = <0>; - swphy1: swphy1@17 { + swphy1: ethernet-phy@17 { reg = <17>; }; - swphy2: swphy2@18 { + swphy2: ethernet-phy@18 { reg = <18>; }; - swphy3: swphy3@19 { + swphy3: ethernet-phy@19 { reg = <19>; }; - swphy4: swphy4@20 { + swphy4: ethernet-phy@20 { reg = <20>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts index 4125202028c8..67892f0d2863 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts @@ -497,42 +497,42 @@ ge_phy: ethernet-phy@0 { reset-deassert-us = <10000>; }; - switch0: switch0@4 { + switch0: ethernet-switch@4 { compatible = "marvell,mv88e6085"; reg = <4>; pinctrl-names = "default"; pinctrl-0 = <&cp1_switch_reset_pins>; reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan2"; phy-handle = <&switch0phy0>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan1"; phy-handle = <&switch0phy1>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan4"; phy-handle = <&switch0phy2>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "lan3"; phy-handle = <&switch0phy3>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "cpu"; ethernet = <&cp1_eth2>; @@ -545,19 +545,19 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch0phy0: switch0phy0@11 { + switch0phy0: ethernet-phy@11 { reg = <0x11>; }; - switch0phy1: switch0phy1@12 { + switch0phy1: ethernet-phy@12 { reg = <0x12>; }; - switch0phy2: switch0phy2@13 { + switch0phy2: ethernet-phy@13 { reg = <0x13>; }; - switch0phy3: switch0phy3@14 { + switch0phy3: ethernet-phy@14 { reg = <0x14>; }; }; diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi index 32cfb3e2efc3..7538ed56053b 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi @@ -207,11 +207,9 @@ phy0: ethernet-phy@0 { reg = <0>; }; - switch6: switch0@6 { + switch6: ethernet-switch@6 { /* Actual device is MV88E6393X */ compatible = "marvell,mv88e6190"; - #address-cells = <1>; - #size-cells = <0>; reg = <6>; interrupt-parent = <&cp0_gpio1>; interrupts = <28 IRQ_TYPE_LEVEL_LOW>; @@ -220,59 +218,59 @@ switch6: switch0@6 { dsa,member = <0 0>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "p1"; phy-handle = <&switch0phy1>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "p2"; phy-handle = <&switch0phy2>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "p3"; phy-handle = <&switch0phy3>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "p4"; phy-handle = <&switch0phy4>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "p5"; phy-handle = <&switch0phy5>; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "p6"; phy-handle = <&switch0phy6>; }; - port@7 { + ethernet-port@7 { reg = <7>; label = "p7"; phy-handle = <&switch0phy7>; }; - port@8 { + ethernet-port@8 { reg = <8>; label = "p8"; phy-handle = <&switch0phy8>; }; - port@9 { + ethernet-port@9 { reg = <9>; label = "p9"; phy-mode = "10gbase-r"; @@ -280,7 +278,7 @@ port@9 { managed = "in-band-status"; }; - port@a { + ethernet-port@a { reg = <10>; ethernet = <&cp0_eth0>; phy-mode = "10gbase-r"; @@ -293,35 +291,35 @@ mdio { #address-cells = <1>; #size-cells = <0>; - switch0phy1: switch0phy1@1 { + switch0phy1: ethernet-phy@1 { reg = <0x1>; }; - switch0phy2: switch0phy2@2 { + switch0phy2: ethernet-phy@2 { reg = <0x2>; }; - switch0phy3: switch0phy3@3 { + switch0phy3: ethernet-phy@3 { reg = <0x3>; }; - switch0phy4: switch0phy4@4 { + switch0phy4: ethernet-phy@4 { reg = <0x4>; }; - switch0phy5: switch0phy5@5 { + switch0phy5: ethernet-phy@5 { reg = <0x5>; }; - switch0phy6: switch0phy6@6 { + switch0phy6: ethernet-phy@6 { reg = <0x6>; }; - switch0phy7: switch0phy7@7 { + switch0phy7: ethernet-phy@7 { reg = <0x7>; }; - switch0phy8: switch0phy8@8 { + switch0phy8: ethernet-phy@8 { reg = <0x8>; }; }; From patchwork Mon Nov 13 23:36:01 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 743530 Received: from lindbergh.monkeyblade.net (lindbergh.monkeyblade.net [23.128.96.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 1A5513FB09 for ; Mon, 13 Nov 2023 23:36:07 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="GCYath4z" Received: from mail-lj1-x22d.google.com (mail-lj1-x22d.google.com [IPv6:2a00:1450:4864:20::22d]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 3A270D6D for ; Mon, 13 Nov 2023 15:36:06 -0800 (PST) Received: by mail-lj1-x22d.google.com with SMTP id 38308e7fff4ca-2c83ffcdbe3so25253641fa.1 for ; Mon, 13 Nov 2023 15:36:06 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1699918564; x=1700523364; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=N7sBbrB5dazvmxdFbFWIm12yMxEolhEuwzB459S9svI=; b=GCYath4zyDrnwOJWVtITfzen6Cj9ndDAB2wpCz5yC2xJOvoIZmqQk6tfjPcKHKzIQX 47rXe699q6IgYQatad0qpMeMa482pPA+cOvTH5HFU26TvYy6i+pkGh7Z4q+fsajhaDUC AdZvCAjiBSlg3dHBwVwTw7/xwRZ6evsSdHEtPL+PDEIleTaJXhGHZjh1mUah46fdAYQ1 bbSrTHcCzykX/FPbMkmhFsadn4LlEWZyPB9sl34KXWBx6XiM6cO/H9HDycNyEM5J++Xw J3AAMkeohFvs+wYRT10v0Tqfw55dOHX4tqvMY9MXgjLzqdHRvgU203ibprg5npJ9P/gX yjpg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1699918564; x=1700523364; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=N7sBbrB5dazvmxdFbFWIm12yMxEolhEuwzB459S9svI=; b=CpESI3RA1pJ7KXostNlQApJAqP90GLR70KstOpY6je4vp/cXkNO624odBQLDQgZ8ct RdrtzdjntyvvmvVCa1skn2wbtDttgQYJAQSULwVx4fpo72U6hcGGRlGrmyc6br/PIASC oEVShxXx2xoDn4T1rKk6CbSErOA0bLV3jSiOqTUscbTZYtxPbRmFcycOGGGfBi0gQWkY 6xVYu5ERESsuFALiQhwADe9x0w+U0D1FxSlneBdvKAK1dm84SQptD0yCn8sJR+2SNUb3 G63pz5pM6f2RSqDBfCfE/tVc5PaDPFEgiTd3WQ8Z8awyQ1mdCRzemDABJO8GZF/pqowB prFA== X-Gm-Message-State: AOJu0YwevCejFnBI/s1pRd0EzEsWe5doVhbLMFWLLR+MlvE7Z0xiHY7v 3diIBWxA/1DPg92aIFhddCexOA== X-Google-Smtp-Source: AGHT+IEcKzuTyUsnCCKx0aDIJeN7M8fqCWuHVFSv5zu+wJ/DA8g7pht0vHxLMNEUkq/nMkCaBzn1tQ== X-Received: by 2002:a05:651c:1055:b0:2c5:3139:2d04 with SMTP id x21-20020a05651c105500b002c531392d04mr451059ljm.47.1699918564602; Mon, 13 Nov 2023 15:36:04 -0800 (PST) Received: from [127.0.1.1] ([85.235.12.238]) by smtp.gmail.com with ESMTPSA id 17-20020a2e0611000000b002b70a8478ddsm1202859ljg.44.2023.11.13.15.36.03 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 13 Nov 2023 15:36:04 -0800 (PST) From: Linus Walleij Date: Tue, 14 Nov 2023 00:36:01 +0100 Subject: [PATCH net-next v8 6/9] dt-bindings: net: ethernet-switch: Accept special variants Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231114-marvell-88e6152-wan-led-v8-6-50688741691b@linaro.org> References: <20231114-marvell-88e6152-wan-led-v8-0-50688741691b@linaro.org> In-Reply-To: <20231114-marvell-88e6152-wan-led-v8-0-50688741691b@linaro.org> To: Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Russell King , Florian Fainelli , Vladimir Oltean , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , =?utf-8?q?Marek_Beh=C3=BAn?= Cc: Christian Marangi , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, Linus Walleij X-Mailer: b4 0.12.4 Accept special node naming variants for Marvell switches with special node names as ABI. This is maybe not the prettiest but it avoids special-casing the Marvell MV88E6xxx bindings by copying a lot of generic binding code down into that one binding just to special-case these unfixable nodes. Signed-off-by: Linus Walleij Reviewed-by: Andrew Lunn Reviewed-by: Rob Herring --- .../devicetree/bindings/net/ethernet-switch.yaml | 23 +++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/net/ethernet-switch.yaml b/Documentation/devicetree/bindings/net/ethernet-switch.yaml index 72ac67ca3415..b3b7e1a1b127 100644 --- a/Documentation/devicetree/bindings/net/ethernet-switch.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-switch.yaml @@ -20,9 +20,26 @@ description: select: false -properties: - $nodename: - pattern: "^(ethernet-)?switch(@.*)?$" +allOf: + # This condition is here to satisfy the case where certain device + # nodes have to preserve non-standard names because of + # backward-compatibility with boot loaders inspecting certain + # node names. + - if: + properties: + compatible: + contains: + enum: + - marvell,turris-mox-mv88e6085 + - marvell,turris-mox-mv88e6190 + then: + properties: + $nodename: + pattern: "switch[0-3]@[0-3]+$" + else: + properties: + $nodename: + pattern: "^(ethernet-)?switch(@.*)?$" patternProperties: "^(ethernet-)?ports$": From patchwork Mon Nov 13 23:36:02 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 743529 Received: from lindbergh.monkeyblade.net (lindbergh.monkeyblade.net [23.128.96.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 867A73FB17 for ; Mon, 13 Nov 2023 23:36:10 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="C8bdZCJc" Received: from mail-lj1-x22a.google.com (mail-lj1-x22a.google.com [IPv6:2a00:1450:4864:20::22a]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B3C611702 for ; Mon, 13 Nov 2023 15:36:07 -0800 (PST) Received: by mail-lj1-x22a.google.com with SMTP id 38308e7fff4ca-2c6cb4a79deso54774791fa.1 for ; Mon, 13 Nov 2023 15:36:07 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1699918566; x=1700523366; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=Wc+Wq7sqd6cor2r5WAdGrmvNaWx96k7C6JDLjLbdJqE=; b=C8bdZCJcexlqB4ZQ5RjViELydZYyJRb0q5C2ONuZ7Vn/22FGgI4cHZNDzhYGCozT1i MgYXsoPl01vdXeN1xyZmEzXa6EIIwbCZTgyViY9Bb/yB7fCXnP6TAvZsKdyvI9TvxYH3 wJWaxZvDeylVRcvCQBesFrIv7EOMh0C7/GhDquMxM+Bi4tNe/525IHiIbN4McC8rX13b m1AKhFZg6ku+5tKGQReTfvpscasQVR4hyMBIcBle1RNqN90HXjwBdZ6xOzy++4zt/H1W RXnGpuvqspKV6YqRCKSKJHv0ndEkVT2UQNb5Ha1ffmYj3/BSESJIiJV3iILQVqO/l/vO hRFA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1699918566; x=1700523366; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=Wc+Wq7sqd6cor2r5WAdGrmvNaWx96k7C6JDLjLbdJqE=; b=ZZp+SO6XjeLLztYcg1dSvYYWMjRKRCm3XgG3fXZD6Nva/d3UNZCqV8sBAXi19x2Udu s2Og4QSNMsKZwGr7TkmQet9B7GKxVWIa/r1AABQDeQsU+LwYDo2B8oEqUn77kamWgdvV 8f9fcFttUAWU6Df4h21cypugNuRWdlvNwl+zcwWHKUAbpQlFXmR1yT3IEGIY2cJVQBL5 mKTinHVyRcm8y0ukwGhzyLhVJv7MUEADxn1K67+Nb9NOgDx1u0TfytVTYR9zhqeVFNHe A8UJu4Wz88/xZEMmy3COItPTjkrdzgrwUx2s92toDhwfRfG6YdKxo5UwLG9XLuhVVVh6 Cj1w== X-Gm-Message-State: AOJu0Yx2Ut4m+BkrAC64Az3FzPJk1AA/U+KIEVXOOdTKgM+ONIMlfIQm F1aJD+EL78moAR8eUNcTBnZxbQ== X-Google-Smtp-Source: AGHT+IG4Cj5m1hC6xB7TsQYZze+Ywj04f7LA/6FAjfEo+HYtHB1lh+d3McvkWwQMVejVkOZu0H07IQ== X-Received: by 2002:a2e:9042:0:b0:2c3:c4b8:19ec with SMTP id n2-20020a2e9042000000b002c3c4b819ecmr192115ljg.18.1699918565731; Mon, 13 Nov 2023 15:36:05 -0800 (PST) Received: from [127.0.1.1] ([85.235.12.238]) by smtp.gmail.com with ESMTPSA id 17-20020a2e0611000000b002b70a8478ddsm1202859ljg.44.2023.11.13.15.36.04 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 13 Nov 2023 15:36:05 -0800 (PST) From: Linus Walleij Date: Tue, 14 Nov 2023 00:36:02 +0100 Subject: [PATCH net-next v8 7/9] dt-bindings: marvell: Rewrite MV88E6xxx in schema Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231114-marvell-88e6152-wan-led-v8-7-50688741691b@linaro.org> References: <20231114-marvell-88e6152-wan-led-v8-0-50688741691b@linaro.org> In-Reply-To: <20231114-marvell-88e6152-wan-led-v8-0-50688741691b@linaro.org> To: Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Russell King , Florian Fainelli , Vladimir Oltean , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , =?utf-8?q?Marek_Beh=C3=BAn?= Cc: Christian Marangi , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, Linus Walleij , Rob Herring , Florian Fainelli X-Mailer: b4 0.12.4 This is an attempt to rewrite the Marvell MV88E6xxx switch bindings in YAML schema. The current text binding says: WARNING: This binding is currently unstable. Do not program it into a FLASH never to be changed again. Once this binding is stable, this warning will be removed. Well that never happened before we switched to YAML markup, we can't have it like this, what about fixing the mess? Reviewed-by: Andrew Lunn Reviewed-by: Rob Herring Reviewed-by: Florian Fainelli Signed-off-by: Linus Walleij --- .../bindings/net/dsa/marvell,mv88e6xxx.yaml | 337 +++++++++++++++++++++ .../devicetree/bindings/net/dsa/marvell.txt | 109 ------- MAINTAINERS | 2 +- 3 files changed, 338 insertions(+), 110 deletions(-) diff --git a/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6xxx.yaml b/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6xxx.yaml new file mode 100644 index 000000000000..19f15bdd1c97 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6xxx.yaml @@ -0,0 +1,337 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6xxx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MV88E6xxx DSA switch family + +maintainers: + - Andrew Lunn + +description: + The Marvell MV88E6xxx switch series has been produced and sold + by Marvell since at least 2008. The switch has a few compatibles which + just indicate the base address of the switch, then operating systems + can investigate switch ID registers to find out which actual version + of the switch it is dealing with. + +properties: + compatible: + oneOf: + - enum: + - marvell,mv88e6085 + - marvell,mv88e6190 + - marvell,mv88e6250 + description: | + marvell,mv88e6085: This switch uses base address 0x10. + This switch and its siblings will be autodetected from + ID registers found in the switch, so only "marvell,mv88e6085" should be + specified. This includes the following list of MV88Exxxx switches: + 6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165, 6171, 6172, 6175, 6176, + 6185, 6240, 6320, 6321, 6341, 6350, 6351, 6352 + marvell,mv88e6190: This switch uses base address 0x00. + This switch and its siblings will be autodetected from + ID registers found in the switch, so only "marvell,mv88e6190" should be + specified. This includes the following list of MV88Exxxx switches: + 6190, 6190X, 6191, 6290, 6361, 6390, 6390X + marvell,mv88e6250: This switch uses base address 0x08 or 0x18. + This switch and its siblings will be autodetected from + ID registers found in the switch, so only "marvell,mv88e6250" should be + specified. This includes the following list of MV88Exxxx switches: + 6220, 6250 + - items: + - const: marvell,turris-mox-mv88e6085 + - const: marvell,mv88e6085 + - items: + - const: marvell,turris-mox-mv88e6190 + - const: marvell,mv88e6190 + + reg: + maxItems: 1 + + eeprom-length: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Set to the length of an EEPROM connected to the switch. Must be + set if the switch can not detect the presence and/or size of a connected + EEPROM, otherwise optional. + + reset-gpios: + description: + GPIO to be used to reset the whole device + maxItems: 1 + + interrupts: + description: The switch provides an external interrupt line, but it is + not always used by target systems. + maxItems: 1 + + interrupt-controller: + description: The switch has an internal interrupt controller used by + the different sub-blocks. + + '#interrupt-cells': + description: The internal interrupt controller only supports triggering + on active high level interrupts so the second cell must alway be set to + IRQ_TYPE_LEVEL_HIGH. + const: 2 + + mdio: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + description: Marvell MV88E6xxx switches have an varying combination of + internal and external MDIO buses, in some cases a combined bus that + can be used both internally and externally. This node is for the + primary bus, used internally and sometimes also externally. + + mdio-external: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + description: Marvell MV88E6xxx switches that have a separate external + MDIO bus use this port to access external components on the MDIO bus. + + properties: + compatible: + const: marvell,mv88e6xxx-mdio-external + + required: + - compatible + +allOf: + - $ref: dsa.yaml#/$defs/ethernet-ports + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-switch@0 { + compatible = "marvell,mv88e6085"; + reg = <0>; + reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + sw_phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + sw_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + sw_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + sw_phy3: ethernet-phy@3 { + reg = <0x3>; + }; + }; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-port@0 { + reg = <0>; + label = "lan4"; + phy-handle = <&sw_phy0>; + phy-mode = "internal"; + }; + + ethernet-port@1 { + reg = <1>; + label = "lan3"; + phy-handle = <&sw_phy1>; + phy-mode = "internal"; + }; + + ethernet-port@2 { + reg = <2>; + label = "lan2"; + phy-handle = <&sw_phy2>; + phy-mode = "internal"; + }; + + ethernet-port@3 { + reg = <3>; + label = "lan1"; + phy-handle = <&sw_phy3>; + phy-mode = "internal"; + }; + + ethernet-port@5 { + reg = <5>; + ethernet = <&fec>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; + - | + #include + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-switch@0 { + compatible = "marvell,mv88e6190"; + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&switch_interrupt_pins>; + pinctrl-names = "default"; + reg = <0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + switch0phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + switch0phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + switch0phy4: ethernet-phy@4 { + reg = <0x4>; + }; + + switch0phy5: ethernet-phy@5 { + reg = <0x5>; + }; + + switch0phy6: ethernet-phy@6 { + reg = <0x6>; + }; + + switch0phy7: ethernet-phy@7 { + reg = <0x7>; + }; + + switch0phy8: ethernet-phy@8 { + reg = <0x8>; + }; + }; + + mdio-external { + compatible = "marvell,mv88e6xxx-mdio-external"; + #address-cells = <1>; + #size-cells = <0>; + + phy1: ethernet-phy@b { + reg = <0xb>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + + phy2: ethernet-phy@c { + reg = <0xc>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; + }; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-port@0 { + ethernet = <ð0>; + phy-mode = "rgmii"; + reg = <0>; + + fixed-link { + full-duplex; + pause; + speed = <1000>; + }; + }; + + ethernet-port@1 { + label = "lan1"; + phy-handle = <&switch0phy1>; + reg = <1>; + }; + + ethernet-port@2 { + label = "lan2"; + phy-handle = <&switch0phy2>; + reg = <2>; + }; + + ethernet-port@3 { + label = "lan3"; + phy-handle = <&switch0phy3>; + reg = <3>; + }; + + ethernet-port@4 { + label = "lan4"; + phy-handle = <&switch0phy4>; + reg = <4>; + }; + + ethernet-port@5 { + label = "lan5"; + phy-handle = <&switch0phy5>; + reg = <5>; + }; + + ethernet-port@6 { + label = "lan6"; + phy-handle = <&switch0phy6>; + reg = <6>; + }; + + ethernet-port@7 { + label = "lan7"; + phy-handle = <&switch0phy7>; + reg = <7>; + }; + + ethernet-port@8 { + label = "lan8"; + phy-handle = <&switch0phy8>; + reg = <8>; + }; + + ethernet-port@9 { + /* 88X3310P external phy */ + label = "lan9"; + phy-handle = <&phy1>; + phy-mode = "xaui"; + reg = <9>; + }; + + ethernet-port@a { + /* 88X3310P external phy */ + label = "lan10"; + phy-handle = <&phy2>; + phy-mode = "xaui"; + reg = <0xa>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt deleted file mode 100644 index 6ec0c181b6db..000000000000 --- a/Documentation/devicetree/bindings/net/dsa/marvell.txt +++ /dev/null @@ -1,109 +0,0 @@ -Marvell DSA Switch Device Tree Bindings ---------------------------------------- - -WARNING: This binding is currently unstable. Do not program it into a -FLASH never to be changed again. Once this binding is stable, this -warning will be removed. - -If you need a stable binding, use the old dsa.txt binding. - -Marvell Switches are MDIO devices. The following properties should be -placed as a child node of an mdio device. - -The properties described here are those specific to Marvell devices. -Additional required and optional properties can be found in dsa.txt. - -The compatibility string is used only to find an identification register, -which is at a different MDIO base address in different switch families. -- "marvell,mv88e6085" : Switch has base address 0x10. Use with models: - 6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165, - 6171, 6172, 6175, 6176, 6185, 6240, 6320, 6321, - 6341, 6350, 6351, 6352 -- "marvell,mv88e6190" : Switch has base address 0x00. Use with models: - 6190, 6190X, 6191, 6290, 6361, 6390, 6390X -- "marvell,mv88e6250" : Switch has base address 0x08 or 0x18. Use with model: - 6220, 6250 - -Required properties: -- compatible : Should be one of "marvell,mv88e6085", - "marvell,mv88e6190" or "marvell,mv88e6250" as - indicated above -- reg : Address on the MII bus for the switch. - -Optional properties: - -- reset-gpios : Should be a gpio specifier for a reset line -- interrupts : Interrupt from the switch -- interrupt-controller : Indicates the switch is itself an interrupt - controller. This is used for the PHY interrupts. -#interrupt-cells = <2> : Controller uses two cells, number and flag -- eeprom-length : Set to the length of an EEPROM connected to the - switch. Must be set if the switch can not detect - the presence and/or size of a connected EEPROM, - otherwise optional. -- mdio : Container of PHY and devices on the switches MDIO - bus. -- mdio? : Container of PHYs and devices on the external MDIO - bus. The node must contains a compatible string of - "marvell,mv88e6xxx-mdio-external" - -Example: - - mdio { - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&gpio0>; - interrupts = <27 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - - switch0: switch@0 { - compatible = "marvell,mv88e6085"; - reg = <0>; - reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - switch1phy0: switch1phy0@0 { - reg = <0>; - interrupt-parent = <&switch0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <&gpio0>; - interrupts = <27 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - - switch0: switch@0 { - compatible = "marvell,mv88e6190"; - reg = <0>; - reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - switch1phy0: switch1phy0@0 { - reg = <0>; - interrupt-parent = <&switch0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - }; - }; - - mdio1 { - compatible = "marvell,mv88e6xxx-mdio-external"; - #address-cells = <1>; - #size-cells = <0>; - switch1phy9: switch1phy0@9 { - reg = <9>; - }; - }; - }; - }; diff --git a/MAINTAINERS b/MAINTAINERS index 90f13281d297..1b4475254d27 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12625,7 +12625,7 @@ MARVELL 88E6XXX ETHERNET SWITCH FABRIC DRIVER M: Andrew Lunn L: netdev@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/net/dsa/marvell.txt +F: Documentation/devicetree/bindings/net/dsa/marvell,mv88e6xxx.yaml F: Documentation/networking/devlink/mv88e6xxx.rst F: drivers/net/dsa/mv88e6xxx/ F: include/linux/dsa/mv88e6xxx.h From patchwork Mon Nov 13 23:36:03 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 744212 Received: from lindbergh.monkeyblade.net (lindbergh.monkeyblade.net [23.128.96.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 66B2E3FB01 for ; Mon, 13 Nov 2023 23:36:11 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="uU/KBqdw" Received: from mail-lj1-x22d.google.com (mail-lj1-x22d.google.com [IPv6:2a00:1450:4864:20::22d]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 638401728 for ; Mon, 13 Nov 2023 15:36:08 -0800 (PST) Received: by mail-lj1-x22d.google.com with SMTP id 38308e7fff4ca-2c50fbc218bso66040781fa.3 for ; Mon, 13 Nov 2023 15:36:08 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1699918566; x=1700523366; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=XzpjgIoTApBpg6RH8jtn7hI12q8Te+BGFiuT3n+0Mpg=; b=uU/KBqdwoiS0R7cUYvjtAYtLQGt3GqnCwBeS+O0UWPG6cQRV2s+ceDoE11Z5miV8ug 85GBJc/C9N9iPO0upMx83NZBjqYX9U7OPLMCjlpFLjiQM4mzQ8T04cuL77oql77j7/BW tIF8GbUsSi4fBhiC4bqtwc/ju3WioxwcyM1CFrdUgSSL9CJUUcNE/SpYxUHe6PsdsWes fBwVm+smyqXEy9uKl39N7xjNZcNktMA4jv4zQGWJpZNbVPL0duaKdfUOYO2oXxSChI2m gD3oaWVXa2xPEqwBFsbTOX2olo9wUd6pz/dXX2KjAEltW6wFEbr67P4ZCYePmFQ8PZHw j1TQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1699918566; x=1700523366; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=XzpjgIoTApBpg6RH8jtn7hI12q8Te+BGFiuT3n+0Mpg=; b=VWWjXNEfGLwAfrv3t6t6tStPyM0XEzrCybOMxlaYidGWDpICb9UtAt1HrGqaF12fuq /aqlgsa5ooYlIzRPh5feUMlEYcLhKZIB+0nMZfn7JjaSU3dcF9T9ckHR+3cuA4x2Vn/g dYSkb5pdvF3SO7gPcD4hYgSAJsV1EV+vGXg1rdUz7duSdphj/ioUEU+gQHu1vayc7baF 32hAgavWzTRxvKTJdBmmu13lfGOssMKC4BcyFzbOn9XsdKfUV2t8C8PDeCdojy13EiJt /UnoHDv1vWiIAw0TYKi2EYDEF8VYCR0IK886thJnKDjbzoJWGnjwSp6ZtaOn3cYdmAMw K2Zg== X-Gm-Message-State: AOJu0YwTMUAvRxiyr6k9LD4+1jiynmEWrGrxqgWmzuzzkkaknswaP5cA I9brWuKWg4AF3eOgjByDyNDlcQ== X-Google-Smtp-Source: AGHT+IFNcKHf6oE6p5RPbdVx7uMMDCSOP+eTKVss4Nmp8f/70WXA9vQVoDVofrpkOT5vFPot1i3/QQ== X-Received: by 2002:a2e:bc28:0:b0:2c6:eccb:344d with SMTP id b40-20020a2ebc28000000b002c6eccb344dmr646562ljf.40.1699918566771; Mon, 13 Nov 2023 15:36:06 -0800 (PST) Received: from [127.0.1.1] ([85.235.12.238]) by smtp.gmail.com with ESMTPSA id 17-20020a2e0611000000b002b70a8478ddsm1202859ljg.44.2023.11.13.15.36.05 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 13 Nov 2023 15:36:06 -0800 (PST) From: Linus Walleij Date: Tue, 14 Nov 2023 00:36:03 +0100 Subject: [PATCH net-next v8 8/9] ARM64: dts: Add special compatibles for the Turris Mox Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231114-marvell-88e6152-wan-led-v8-8-50688741691b@linaro.org> References: <20231114-marvell-88e6152-wan-led-v8-0-50688741691b@linaro.org> In-Reply-To: <20231114-marvell-88e6152-wan-led-v8-0-50688741691b@linaro.org> To: Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Russell King , Florian Fainelli , Vladimir Oltean , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , =?utf-8?q?Marek_Beh=C3=BAn?= Cc: Christian Marangi , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, Linus Walleij X-Mailer: b4 0.12.4 These special compatibles are added to the Marvell Armada 3720 Turris Mox in order to be able to special-case and avoid warnings on the non-standard nodenames that are ABI on this one board due to being used in deployed versions of U-Boot. Signed-off-by: Linus Walleij --- arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index 66cd98b67744..a89747d2a600 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -312,7 +312,7 @@ phy1: ethernet-phy@1 { * Also do not touch the "ports" or "port@n" nodes. These are also ABI. */ switch0@10 { - compatible = "marvell,mv88e6190"; + compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190"; reg = <0x10>; dsa,member = <0 0>; interrupt-parent = <&moxtet>; @@ -438,7 +438,7 @@ port-sfp@a { /* NOTE: this node name is ABI, don't change it! */ switch0@2 { - compatible = "marvell,mv88e6085"; + compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085"; reg = <0x2>; dsa,member = <0 0>; interrupt-parent = <&moxtet>; @@ -506,7 +506,7 @@ port@5 { /* NOTE: this node name is ABI, don't change it! */ switch1@11 { - compatible = "marvell,mv88e6190"; + compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190"; reg = <0x11>; dsa,member = <0 1>; interrupt-parent = <&moxtet>; @@ -632,7 +632,7 @@ port-sfp@a { /* NOTE: this node name is ABI, don't change it! */ switch1@2 { - compatible = "marvell,mv88e6085"; + compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085"; reg = <0x2>; dsa,member = <0 1>; interrupt-parent = <&moxtet>; @@ -700,7 +700,7 @@ port@5 { /* NOTE: this node name is ABI, don't change it! */ switch2@12 { - compatible = "marvell,mv88e6190"; + compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190"; reg = <0x12>; dsa,member = <0 2>; interrupt-parent = <&moxtet>; @@ -817,7 +817,7 @@ port-sfp@a { /* NOTE: this node name is ABI, don't change it! */ switch2@2 { - compatible = "marvell,mv88e6085"; + compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085"; reg = <0x2>; dsa,member = <0 2>; interrupt-parent = <&moxtet>; From patchwork Mon Nov 13 23:36:04 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 743528 Received: from lindbergh.monkeyblade.net (lindbergh.monkeyblade.net [23.128.96.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id EC1023E46C for ; Mon, 13 Nov 2023 23:36:12 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="OdgI0zWm" Received: from mail-lj1-x22f.google.com (mail-lj1-x22f.google.com [IPv6:2a00:1450:4864:20::22f]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id AC186173B for ; Mon, 13 Nov 2023 15:36:09 -0800 (PST) Received: by mail-lj1-x22f.google.com with SMTP id 38308e7fff4ca-2c6cb4a79deso54775041fa.1 for ; Mon, 13 Nov 2023 15:36:09 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1699918568; x=1700523368; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=lIz/GtmN1t9bIiyorUy96/+eOLVRUGVLvuVaAhEDkG8=; b=OdgI0zWmy9KTh8RatOScq/MmE9nEeSB7fThpWdc4w7s68S0HWOOS9Ufcyn87JiUFH3 30cMbwkZnE1h9RTkgP0NMjpbg/GZfSESdT9xhEWrwMYlGkvDQhm9cbYnDBYYbAMR0eBx QglxdpHS/iPrhyE0vNTHl6rgPlOga1UiyVz5nu5c3mhO/XHHhUFUdGlskuQ2NcffSYCb 0N1QESSM/K7CyOfi5b9GjrmVJS5wvuo9hdgKM96kuNRwp1YeyWgx5qOFHDe5u1efQBvz 2aIoaOuyQticBmGL4YbVKBhEfhKxRCQeEV7UG33g+W4/6Xppf8QHze1ZbXI8wIkt9jAa Vy6A== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1699918568; x=1700523368; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=lIz/GtmN1t9bIiyorUy96/+eOLVRUGVLvuVaAhEDkG8=; b=CvP0BHd9ejMbn6lyF5M4dTxxtURqMpfQ1UZuzOdcFkvGMNN96/kybDqkeBxugz95KW q9PN14q0Lb/os7dukWPcRuA9pp6XAhvYXvAfi6MC+bG0byQHrAi3IsdGg9Cdji/cufBH aDOTBwCkc/EZ8MrX2A7z05DHt3E7Hswr5fwdQd9jvr5MDkWU1lAs6MqoI9qquCJW3BAH EEVAN08FMadYS7S+7ivyvMl3UAKNMN70233XVgawEv7062jnrKVxtbHjOU0GsMUXR7ok VfL2JrDXIBct00bINw8HwbWkPI46GYIK8qdoJIFm7mj6Z/UiXxfbm2sSRmOwyDaou+2U Cwew== X-Gm-Message-State: AOJu0Yz0yJdTz26KmZ6qvwIJVMkNOOwy7Bg5QfnKvbr5aykZaifUZZBL 1srwD3FqdXMw3sffGwvFcSs5cw== X-Google-Smtp-Source: AGHT+IFxSldNF2UOlvgvflSNOcHswJutVDAUwO0Tw9t/H8g7uE54ZPrkfTELcjw4bqAhmaVslya7Cg== X-Received: by 2002:a2e:99ce:0:b0:2c3:e35d:13d with SMTP id l14-20020a2e99ce000000b002c3e35d013dmr183482ljj.5.1699918567898; Mon, 13 Nov 2023 15:36:07 -0800 (PST) Received: from [127.0.1.1] ([85.235.12.238]) by smtp.gmail.com with ESMTPSA id 17-20020a2e0611000000b002b70a8478ddsm1202859ljg.44.2023.11.13.15.36.06 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 13 Nov 2023 15:36:07 -0800 (PST) From: Linus Walleij Date: Tue, 14 Nov 2023 00:36:04 +0100 Subject: [PATCH net-next v8 9/9] dt-bindings: marvell: Add Marvell MV88E6060 DSA schema Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231114-marvell-88e6152-wan-led-v8-9-50688741691b@linaro.org> References: <20231114-marvell-88e6152-wan-led-v8-0-50688741691b@linaro.org> In-Reply-To: <20231114-marvell-88e6152-wan-led-v8-0-50688741691b@linaro.org> To: Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Russell King , Florian Fainelli , Vladimir Oltean , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , =?utf-8?q?Marek_Beh=C3=BAn?= Cc: Christian Marangi , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, Linus Walleij , Vladimir Oltean , Rob Herring , Florian Fainelli X-Mailer: b4 0.12.4 The Marvell MV88E6060 is one of the oldest DSA switches from Marvell, and it has DT bindings used in the wild. Let's define them properly. It is different enough from the rest of the MV88E6xxx switches that it deserves its own binding. Reviewed-by: Andrew Lunn Reviewed-by: Vladimir Oltean Reviewed-by: Rob Herring Reviewed-by: Florian Fainelli Signed-off-by: Linus Walleij --- .../bindings/net/dsa/marvell,mv88e6060.yaml | 88 ++++++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 89 insertions(+) diff --git a/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6060.yaml b/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6060.yaml new file mode 100644 index 000000000000..4f1adf00431a --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/marvell,mv88e6060.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/marvell,mv88e6060.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MV88E6060 DSA switch + +maintainers: + - Andrew Lunn + +description: + The Marvell MV88E6060 switch has been produced and sold by Marvell + since at least 2008. The switch has one pin ADDR4 that controls the + MDIO address of the switch to be 0x10 or 0x00, and on the MDIO bus + connected to the switch, the PHYs inside the switch appear as + independent devices on address 0x00-0x04 or 0x10-0x14, so in difference + from many other DSA switches this switch does not have an internal + MDIO bus for the PHY devices. + +properties: + compatible: + const: marvell,mv88e6060 + description: + The MV88E6060 is the oldest Marvell DSA switch product, and + as such a bit limited in features compared to later hardware. + + reg: + maxItems: 1 + + reset-gpios: + description: + GPIO to be used to reset the whole device + maxItems: 1 + +allOf: + - $ref: dsa.yaml#/$defs/ethernet-ports + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include + #include + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-switch@16 { + compatible = "marvell,mv88e6060"; + reg = <16>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-port@0 { + reg = <0>; + label = "lan1"; + }; + ethernet-port@1 { + reg = <1>; + label = "lan2"; + }; + ethernet-port@2 { + reg = <2>; + label = "lan3"; + }; + ethernet-port@3 { + reg = <3>; + label = "lan4"; + }; + ethernet-port@5 { + reg = <5>; + phy-mode = "rev-mii"; + ethernet = <ðc>; + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 1b4475254d27..4c933a2a56ad 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12625,6 +12625,7 @@ MARVELL 88E6XXX ETHERNET SWITCH FABRIC DRIVER M: Andrew Lunn L: netdev@vger.kernel.org S: Maintained +F: Documentation/devicetree/bindings/net/dsa/marvell,mv88e6060.yaml F: Documentation/devicetree/bindings/net/dsa/marvell,mv88e6xxx.yaml F: Documentation/networking/devlink/mv88e6xxx.rst F: drivers/net/dsa/mv88e6xxx/