From patchwork Sat Nov 25 09:42:45 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tony Lindgren X-Patchwork-Id: 747374 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=atomide.com header.i=@atomide.com header.b="CiNetAUF" Received: from mail5.25mail.st (mail5.25mail.st [74.50.62.9]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5627210C1; Sat, 25 Nov 2023 01:43:16 -0800 (PST) Received: from localhost (91-158-86-216.elisa-laajakaista.fi [91.158.86.216]) by mail5.25mail.st (Postfix) with ESMTPSA id 1A21760BB9; Sat, 25 Nov 2023 09:42:57 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=atomide.com; s=25mailst; t=1700905394; bh=nu8DlRfSh19BEy3+xZ6QoXfOgj8GOAKGuiI6HaNBMnc=; h=From:To:Cc:Subject:Date:From; b=CiNetAUFK2gMTMV2Jda2dgioegd8dKUhdRrSWCIHVAElR0cU3sAXszCQTXW4hA93L Cxx5Pp75A8g1/USIuxkI5D66GbKPVUarJ5e1E0e/O0awzDcmAb0UPVLFxIFMWyPm/J dPjuZhApzxyuKzlRr8JptKKIQPX4l8GDJxvXerNdEA7b9LEdfEwbEq9qiHgvh6Wv4K jMY2Cg7BecibRyiDTFc8mh2McRgXoY3QQabw5U01+v1HE+mc16XEAYbjzw+o/xVB96 s3BwSYWQ4Axs03yArNorMiej+qRreEJP2PYpf5iSh0HuJW0DVcmZbc07UDg2ZZrQAJ 43h+iumZMQS2g== From: Tony Lindgren To: linux-omap@vger.kernel.org Cc: =?utf-8?q?Beno=C3=AEt_Cousson?= , Carl Philipp Klemm , Ivaylo Dimitrov , Merlijn Wajer , Pavel Machek , Sebastian Reichel , devicetree@vger.kernel.org Subject: [PATCH 1/4] dt-bindings: omap: Add Motorola mapphone mz609 and mz617 tablets Date: Sat, 25 Nov 2023 11:42:45 +0200 Message-ID: <20231125094248.43537-1-tony@atomide.com> X-Mailer: git-send-email 2.42.1 Precedence: bulk X-Mailing-List: linux-omap@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Let's add compatibles for some xyboard tablets, these are similar to the mapphone devices already listed but with different peripherals. Signed-off-by: Tony Lindgren --- Documentation/devicetree/bindings/arm/ti/omap.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/ti/omap.yaml b/Documentation/devicetree/bindings/arm/ti/omap.yaml --- a/Documentation/devicetree/bindings/arm/ti/omap.yaml +++ b/Documentation/devicetree/bindings/arm/ti/omap.yaml @@ -134,6 +134,8 @@ properties: - amazon,omap4-kc1 # Amazon Kindle Fire (first generation) - motorola,droid4 # Motorola Droid 4 XT894 - motorola,droid-bionic # Motorola Droid Bionic XT875 + - motorola,xyboard-mz609 + - motorola,xyboard-mz617 - ti,omap4-panda - ti,omap4-sdp - const: ti,omap4430 From patchwork Sat Nov 25 09:42:46 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tony Lindgren X-Patchwork-Id: 747498 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=atomide.com header.i=@atomide.com header.b="kX2LRU5U" Received: from mail5.25mail.st (mail5.25mail.st [74.50.62.9]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 41F1010C1; Sat, 25 Nov 2023 01:43:38 -0800 (PST) Received: from localhost (91-158-86-216.elisa-laajakaista.fi [91.158.86.216]) by mail5.25mail.st (Postfix) with ESMTPSA id E343960BB9; Sat, 25 Nov 2023 09:43:20 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=atomide.com; s=25mailst; t=1700905417; bh=It1pV+Gd7fMa9E/eHgnxkdQGRg1oLH4sK1tgrOH2Nt4=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=kX2LRU5UkUPBfsdftMag14Bj7q0aLh+t9bkg49xKfaWVoZqlXpXEFjYvSpbCdQOsW LijVc9PscsTuUldVNz9YgeNlQAj1BM7xh27qBHJaY5fF6KAI5SiHzximZBUgdCWd8w fYI4A6ld7yDDlcT94MTLyi9W3UA6uGqYI6nBrBcjbPesbhcBNYglt3HS0KZJnd3E7v PivITpQTQeKopGyySiwqn5Lj+lw/Pkj0Dddp9Ss1ZYjBmWzjVaXT36UfWi9Pr8j02O 9VGz63kl2gpDTp8JEDv4tVkdnrkc8ILGbZ18IB/Dcpl6R9wvuXhIrXAy6MygA2ufo0 mhQGe/EGg7GJA== From: Tony Lindgren To: linux-omap@vger.kernel.org Cc: =?utf-8?q?Beno=C3=AEt_Cousson?= , Carl Philipp Klemm , Ivaylo Dimitrov , Merlijn Wajer , Pavel Machek , Sebastian Reichel , devicetree@vger.kernel.org Subject: [PATCH 2/4] ARM: dts: motorola-mapphone: Move LCD to common file for xt875 and xt894 Date: Sat, 25 Nov 2023 11:42:46 +0200 Message-ID: <20231125094248.43537-2-tony@atomide.com> X-Mailer: git-send-email 2.42.1 In-Reply-To: <20231125094248.43537-1-tony@atomide.com> References: <20231125094248.43537-1-tony@atomide.com> Precedence: bulk X-Mailing-List: linux-omap@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 The LCD regulator and backlight are specific only to droid bionic xt875 and droid4 xt894. On droid razr xt910 and xt912, the LCD regulator and backlight are different. The LCD and backlight are also different on the the mz609 tablets. Let's add a common motorola-mapphone-xt8xx.dtsi to make it easy to add support for xt910 and xt912 and the mz609 to mz617 tablets. While at it, let's also move aliases to the board specific dts files where they belong. And let's move the omap4-droid4-xt894.dts compatible to the top. Signed-off-by: Tony Lindgren --- .../dts/ti/omap/motorola-mapphone-common.dtsi | 79 ------------------- .../dts/ti/omap/motorola-mapphone-xt8xx.dtsi | 75 ++++++++++++++++++ .../dts/ti/omap/omap4-droid-bionic-xt875.dts | 11 ++- .../boot/dts/ti/omap/omap4-droid4-xt894.dts | 19 +++-- 4 files changed, 98 insertions(+), 86 deletions(-) create mode 100644 arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi --- a/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi @@ -6,15 +6,6 @@ #include "motorola-cpcap-mapphone.dtsi" / { - chosen { - stdout-path = &uart3; - }; - - aliases { - display0 = &lcd0; - display1 = &hdmi0; - }; - /* * We seem to have only 1021 MB accessible, 1021 - 1022 is locked, * then 1023 - 1024 seems to contain mbm. @@ -92,17 +83,6 @@ hsusb2_phy: usb-phy@2 { #phy-cells = <0>; }; - /* LCD regulator from sw5 source */ - lcd_regulator: regulator-lcd { - compatible = "regulator-fixed"; - regulator-name = "lcd"; - regulator-min-microvolt = <5050000>; - regulator-max-microvolt = <5050000>; - gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */ - enable-active-high; - vin-supply = <&sw5>; - }; - /* This is probably coming straight from the battery.. */ wl12xx_vmmc: regulator-wl12xx { compatible = "regulator-fixed"; @@ -160,14 +140,6 @@ vibrator { pwm-names = "enable", "direction"; direction-duty-cycle-ns = <10000000>; }; - - backlight: backlight { - compatible = "led-backlight"; - - leds = <&backlight_led>; - brightness-levels = <31 63 95 127 159 191 223 255>; - default-brightness-level = <6>; - }; }; &cpu_thermal { @@ -197,57 +169,6 @@ &dss { status = "okay"; }; -&dsi1 { - status = "okay"; - vdd-supply = <&vcsi>; - - port { - dsi1_out_ep: endpoint { - remote-endpoint = <&lcd0_in>; - lanes = <0 1 2 3 4 5>; - }; - }; - - lcd0: panel@0 { - compatible = "motorola,droid4-panel", "panel-dsi-cm"; - reg = <0>; - label = "lcd0"; - vddi-supply = <&lcd_regulator>; - reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ - - backlight = <&backlight>; - - width-mm = <50>; - height-mm = <89>; - rotation = <90>; - - panel-timing { - clock-frequency = <0>; /* Calculated by dsi */ - - hback-porch = <2>; - hactive = <540>; - hfront-porch = <0>; - hsync-len = <2>; - - vback-porch = <1>; - vactive = <960>; - vfront-porch = <0>; - vsync-len = <1>; - - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - port { - lcd0_in: endpoint { - remote-endpoint = <&dsi1_out_ep>; - }; - }; - }; -}; - &hdmi { status = "okay"; pinctrl-0 = <&dss_hdmi_pins>; diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi new file mode 100644 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include "motorola-mapphone-common.dtsi" + +/ { + backlight: backlight { + compatible = "led-backlight"; + + leds = <&backlight_led>; + brightness-levels = <31 63 95 127 159 191 223 255>; + default-brightness-level = <6>; + }; + + /* LCD regulator from sw5 source */ + lcd_regulator: regulator-lcd { + compatible = "regulator-fixed"; + regulator-name = "lcd"; + regulator-min-microvolt = <5050000>; + regulator-max-microvolt = <5050000>; + gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */ + enable-active-high; + vin-supply = <&sw5>; + }; +}; + +&dsi1 { + status = "okay"; + vdd-supply = <&vcsi>; + + port { + dsi1_out_ep: endpoint { + remote-endpoint = <&lcd0_in>; + lanes = <0 1 2 3 4 5>; + }; + }; + + lcd0: panel@0 { + compatible = "motorola,droid4-panel", "panel-dsi-cm"; + reg = <0>; + label = "lcd0"; + vddi-supply = <&lcd_regulator>; + reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ + backlight = <&backlight>; + + width-mm = <50>; + height-mm = <89>; + rotation = <90>; + + panel-timing { + clock-frequency = <0>; /* Calculated by dsi */ + + hback-porch = <2>; + hactive = <540>; + hfront-porch = <0>; + hsync-len = <2>; + + vback-porch = <1>; + vactive = <960>; + vfront-porch = <0>; + vsync-len = <1>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd0_in: endpoint { + remote-endpoint = <&dsi1_out_ep>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts b/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts --- a/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts +++ b/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts @@ -1,11 +1,20 @@ // SPDX-License-Identifier: GPL-2.0-only /dts-v1/; -#include "motorola-mapphone-common.dtsi" +#include "motorola-mapphone-xt8xx.dtsi" / { model = "Motorola Droid Bionic XT875"; compatible = "motorola,droid-bionic", "ti,omap4430", "ti,omap4"; + + chosen { + stdout-path = &uart3; + }; + + aliases { + display0 = &lcd0; + display1 = &hdmi0; + }; }; &keypad { diff --git a/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts b/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts --- a/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts @@ -1,9 +1,21 @@ // SPDX-License-Identifier: GPL-2.0-only /dts-v1/; -#include "motorola-mapphone-common.dtsi" +#include "motorola-mapphone-xt8xx.dtsi" / { + model = "Motorola Droid 4 XT894"; + compatible = "motorola,droid4", "ti,omap4430", "ti,omap4"; + + chosen { + stdout-path = &uart3; + }; + + aliases { + display0 = &lcd0; + display1 = &hdmi0; + }; + gpio_keys { compatible = "gpio-keys"; @@ -33,11 +45,6 @@ slider { }; }; -/ { - model = "Motorola Droid 4 XT894"; - compatible = "motorola,droid4", "ti,omap4430", "ti,omap4"; -}; - &keypad { keypad,num-rows = <8>; keypad,num-columns = <8>; From patchwork Sat Nov 25 09:42:47 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tony Lindgren X-Patchwork-Id: 747373 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=atomide.com header.i=@atomide.com header.b="TLPhZAJg" Received: from mail5.25mail.st (mail5.25mail.st [74.50.62.9]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id E0CEF10CA; Sat, 25 Nov 2023 01:43:59 -0800 (PST) Received: from localhost (91-158-86-216.elisa-laajakaista.fi [91.158.86.216]) by mail5.25mail.st (Postfix) with ESMTPSA id 704AF60BB9; Sat, 25 Nov 2023 09:43:42 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=atomide.com; s=25mailst; t=1700905439; bh=HoRRz9E8qzxv93LR1nAhHfAa+ONnozYGIb+7p9ktwMI=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=TLPhZAJgve7t+ds6tdgWFUilkb6nwKS1fcuKASVlQu8pWJLmeNm+3tQZzpsAGCTkb tYwR3jjR0wIlp3kvi4SusLVQAkFLL60NbTnWWLcYgrRxBdfk8FTvXDq5zL+c65yea7 V+N+Kd7kIZU3Z30RPDN1rrmKijh9wY52OKg1vnlAOTvGwZ5lnOVJB5P7OPNftYiCxL Q1cXiROK/52y6D4KKBdDubWf8aTprALYc0C5KAcCzXTtcEA+5CJriX2cJJAV7oyBjt ID7XRTxEL7+CtDBtP/v11J+XhgLc+boCHhC0jciRVToAw3j7A1eM7WjuQ/qCtuqFj2 IzSa8ggd6oPgg== From: Tony Lindgren To: linux-omap@vger.kernel.org Cc: =?utf-8?q?Beno=C3=AEt_Cousson?= , Carl Philipp Klemm , Ivaylo Dimitrov , Merlijn Wajer , Pavel Machek , Sebastian Reichel , devicetree@vger.kernel.org Subject: [PATCH 3/4] ARM: dts: motorola-mapphone: Move handset devices to a common file Date: Sat, 25 Nov 2023 11:42:47 +0200 Message-ID: <20231125094248.43537-3-tony@atomide.com> X-Mailer: git-send-email 2.42.1 In-Reply-To: <20231125094248.43537-1-tony@atomide.com> References: <20231125094248.43537-1-tony@atomide.com> Precedence: bulk X-Mailing-List: linux-omap@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 The mapphone tablets do not have same peripherals as the mapphone handsets. Let's move the handset specific devices into a common motorola-mapphone-handset.dtsi file. Signed-off-by: Tony Lindgren --- .../dts/ti/omap/motorola-mapphone-common.dtsi | 219 ---------------- .../ti/omap/motorola-mapphone-handset.dtsi | 234 ++++++++++++++++++ .../dts/ti/omap/motorola-mapphone-xt8xx.dtsi | 2 +- 3 files changed, 235 insertions(+), 220 deletions(-) create mode 100644 arch/arm/boot/dts/ti/omap/motorola-mapphone-handset.dtsi diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi --- a/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi @@ -54,35 +54,6 @@ hdmi_regulator: regulator-hdmi { regulator-always-on; }; - /* FS USB Host PHY on port 1 for mdm6600 */ - fsusb1_phy: usb-phy@1 { - compatible = "motorola,mapphone-mdm6600"; - pinctrl-0 = <&usb_mdm6600_pins>; - pinctrl-1 = <&usb_mdm6600_sleep_pins>; - pinctrl-names = "default", "sleep"; - enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* gpio_95 */ - power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54 */ - reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; /* gpio_49 */ - /* mode: gpio_148 gpio_149 */ - motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>, - <&gpio5 21 GPIO_ACTIVE_HIGH>; - /* cmd: gpio_103 gpio_104 gpio_142 */ - motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>, - <&gpio4 8 GPIO_ACTIVE_HIGH>, - <&gpio5 14 GPIO_ACTIVE_HIGH>; - /* status: gpio_52 gpio_53 gpio_55 */ - motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>, - <&gpio2 21 GPIO_ACTIVE_HIGH>, - <&gpio2 23 GPIO_ACTIVE_HIGH>; - #phy-cells = <0>; - }; - - /* HS USB host TLL nop-phy on port 2 for w3glte */ - hsusb2_phy: usb-phy@2 { - compatible = "usb-nop-xceiv"; - #phy-cells = <0>; - }; - /* This is probably coming straight from the battery.. */ wl12xx_vmmc: regulator-wl12xx { compatible = "regulator-fixed"; @@ -113,33 +84,6 @@ soundcard { dais = <&mcbsp2_port>, <&mcbsp3_port>; }; - - pwm8: pwm-8 { - pinctrl-names = "default"; - pinctrl-0 = <&vibrator_direction_pin>; - - compatible = "ti,omap-dmtimer-pwm"; - #pwm-cells = <3>; - ti,timers = <&timer8>; - ti,clock-source = <0x01>; - }; - - pwm9: pwm-9 { - pinctrl-names = "default"; - pinctrl-0 = <&vibrator_enable_pin>; - - compatible = "ti,omap-dmtimer-pwm"; - #pwm-cells = <3>; - ti,timers = <&timer9>; - ti,clock-source = <0x01>; - }; - - vibrator { - compatible = "pwm-vibrator"; - pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>; - pwm-names = "enable", "direction"; - direction-duty-cycle-ns = <10000000>; - }; }; &cpu_thermal { @@ -183,13 +127,6 @@ hdmi_out: endpoint { }; }; -/* Battery NVRAM on 1-wire handled by w1_ds250x driver */ -&hdqw1w { - pinctrl-0 = <&hdq_pins>; - pinctrl-names = "default"; - ti,mode = "1w"; -}; - &i2c1 { tmp105@48 { compatible = "ti,tmp105"; @@ -243,34 +180,6 @@ wlcore: wlcore@2 { }; }; -&i2c2 { - touchscreen@4a { - compatible = "atmel,maxtouch"; - reg = <0x4a>; - pinctrl-names = "default"; - pinctrl-0 = <&touchscreen_pins>; - - reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */ - - /* gpio_183 with sys_nirq2 pad as wakeup */ - interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>, - <&omap4_pmx_core 0x160>; - interrupt-names = "irq", "wakeup"; - wakeup-source; - }; - - isl29030@44 { - compatible = "isil,isl29030"; - reg = <0x44>; - - pinctrl-names = "default"; - pinctrl-0 = <&als_proximity_pins>; - - interrupt-parent = <&gpio6>; - interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */ - }; -}; - &omap4_pmx_core { /* hdmi_hpd.gpio_63 */ @@ -280,13 +189,6 @@ OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3) >; }; - hdq_pins: hdq-pins { - pinctrl-single,pins = < - /* 0x4a100120 hdq_sio.hdq_sio aa27 */ - OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0) - >; - }; - /* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */ dss_hdmi_pins: dss-hdmi-pins { pinctrl-single,pins = < @@ -348,73 +250,6 @@ OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) >; }; - touchscreen_pins: touchscreen-pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) - OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3) - >; - }; - - als_proximity_pins: als-proximity-pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3) - >; - }; - - usb_mdm6600_pins: usb-mdm6600-pins { - pinctrl-single,pins = < - /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */ - OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) - - /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */ - OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) - - /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */ - OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3) - - /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */ - OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3) - - /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */ - OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3) - - /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */ - OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3) - - /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */ - OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) - - /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */ - OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) - - /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */ - OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) - - /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */ - OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) - - /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */ - OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3) - >; - }; - - /* Modem sleep pins to keep gpio_49 high with internal pull */ - usb_mdm6600_sleep_pins: usb-mdm6600-sleep-pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) - OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) - OMAP4_IOPAD(0x072, PIN_INPUT_PULLUP | MUX_MODE7) /* Keep gpio_49 reset high */ - OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3) - OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3) - OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3) - OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) - OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) - OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) - OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) - OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3) - >; - }; - usb_ulpi_pins: usb-ulpi-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x196, MUX_MODE7) @@ -522,18 +357,6 @@ OMAP4_IOPAD(0x10a, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_clkx */ OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */ >; }; - - vibrator_direction_pin: vibrator-direction-pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */ - >; - }; - - vibrator_enable_pin: vibrator-enable-pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */ - >; - }; }; &omap4_pmx_wkup { @@ -550,17 +373,6 @@ &rng_target { status = "disabled"; }; -/* Configure pwm clock source for timers 8 & 9 */ -&timer8 { - assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; - assigned-clock-parents = <&sys_32k_ck>; -}; - -&timer9 { - assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; - assigned-clock-parents = <&sys_32k_ck>; -}; - /* * The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149 * for wake-up events for both the USB PHY and the UART. We can use gpio_149 @@ -593,20 +405,6 @@ bluetooth { }; }; -&usbhsohci { - phys = <&fsusb1_phy>; - phy-names = "usb"; -}; - -&usbhsehci { - phys = <&hsusb2_phy>; -}; - -&usbhshost { - port1-mode = "ohci-phy-4pin-dpdm"; - port2-mode = "ehci-tll"; -}; - /* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */ &usb_otg_hs { interface-type = <1>; @@ -619,23 +417,6 @@ &usb_otg_hs { power = <150>; }; -&i2c4 { - ak8975: magnetometer@c { - compatible = "asahi-kasei,ak8975"; - reg = <0x0c>; - - vdd-supply = <&vhvio>; - - interrupt-parent = <&gpio6>; - interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */ - - rotation-matrix = "-1", "0", "0", - "0", "1", "0", - "0", "0", "-1"; - - }; -}; - &mcbsp2 { #sound-dai-cells = <0>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-handset.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-handset.dtsi new file mode 100644 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-handset.dtsi @@ -0,0 +1,234 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include "motorola-mapphone-common.dtsi" + +/ { + /* FS USB Host PHY on port 1 for mdm6600 */ + fsusb1_phy: usb-phy@1 { + compatible = "motorola,mapphone-mdm6600"; + pinctrl-0 = <&usb_mdm6600_pins>; + pinctrl-1 = <&usb_mdm6600_sleep_pins>; + pinctrl-names = "default", "sleep"; + enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* gpio_95 */ + power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54 */ + reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; /* gpio_49 */ + /* mode: gpio_148 gpio_149 */ + motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>, + <&gpio5 21 GPIO_ACTIVE_HIGH>; + /* cmd: gpio_103 gpio_104 gpio_142 */ + motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>, + <&gpio4 8 GPIO_ACTIVE_HIGH>, + <&gpio5 14 GPIO_ACTIVE_HIGH>; + /* status: gpio_52 gpio_53 gpio_55 */ + motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>, + <&gpio2 21 GPIO_ACTIVE_HIGH>, + <&gpio2 23 GPIO_ACTIVE_HIGH>; + #phy-cells = <0>; + }; + + /* HS USB host TLL nop-phy on port 2 for w3glte */ + hsusb2_phy: usb-phy@2 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + + pwm8: pwm-8 { + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_direction_pin>; + + compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; + ti,timers = <&timer8>; + ti,clock-source = <0x01>; + }; + + pwm9: pwm-9 { + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_enable_pin>; + + compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; + ti,timers = <&timer9>; + ti,clock-source = <0x01>; + }; + + vibrator { + compatible = "pwm-vibrator"; + pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>; + pwm-names = "enable", "direction"; + direction-duty-cycle-ns = <10000000>; + }; +}; + +/* Battery NVRAM on 1-wire handled by w1_ds250x driver */ +&hdqw1w { + pinctrl-0 = <&hdq_pins>; + pinctrl-names = "default"; + ti,mode = "1w"; +}; + +&i2c2 { + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + + reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */ + + /* gpio_183 with sys_nirq2 pad as wakeup */ + interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>, + <&omap4_pmx_core 0x160>; + interrupt-names = "irq", "wakeup"; + wakeup-source; + }; + + isl29030@44 { + compatible = "isil,isl29030"; + reg = <0x44>; + + pinctrl-names = "default"; + pinctrl-0 = <&als_proximity_pins>; + + interrupt-parent = <&gpio6>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */ + }; +}; + +&omap4_pmx_core { + hdq_pins: hdq-pins { + pinctrl-single,pins = < + /* 0x4a100120 hdq_sio.hdq_sio aa27 */ + OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0) + >; + }; + + /* kpd_row0.gpio_178 */ + tmp105_irq: tmp105-irq-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + touchscreen_pins: touchscreen-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) + OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + usb_mdm6600_pins: usb-mdm6600-pins { + pinctrl-single,pins = < + /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */ + OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) + + /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */ + OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) + + /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */ + OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3) + + /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */ + OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3) + + /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */ + OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3) + + /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */ + OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3) + + /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */ + OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) + + /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */ + OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) + + /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */ + OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) + + /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */ + OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) + + /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */ + OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3) + >; + }; + + /* Modem sleep pins to keep gpio_49 high with internal pull */ + usb_mdm6600_sleep_pins: usb-mdm6600-sleep-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) + OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) + OMAP4_IOPAD(0x072, PIN_INPUT_PULLUP | MUX_MODE7) /* Keep gpio_49 reset high */ + OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3) + OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3) + OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3) + OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) + OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) + OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) + OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) + OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3) + >; + }; + + als_proximity_pins: als-proximity-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + vibrator_direction_pin: vibrator-direction-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */ + >; + }; + + vibrator_enable_pin: vibrator-enable-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */ + >; + }; +}; + +/* Configure pwm clock source for timers 8 & 9 */ +&timer8 { + assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; + assigned-clock-parents = <&sys_32k_ck>; +}; + +&timer9 { + assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; + assigned-clock-parents = <&sys_32k_ck>; +}; + +&usbhsohci { + phys = <&fsusb1_phy>; + phy-names = "usb"; +}; + +&usbhsehci { + phys = <&hsusb2_phy>; +}; + +&usbhshost { + port1-mode = "ohci-phy-4pin-dpdm"; + port2-mode = "ehci-tll"; +}; + +&i2c4 { + ak8975: magnetometer@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + + vdd-supply = <&vhvio>; + + interrupt-parent = <&gpio6>; + interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */ + + rotation-matrix = "-1", "0", "0", + "0", "1", "0", + "0", "0", "-1"; + + }; +}; diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi --- a/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi +++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only /dts-v1/; -#include "motorola-mapphone-common.dtsi" +#include "motorola-mapphone-handset.dtsi" / { backlight: backlight { From patchwork Sat Nov 25 09:42:48 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tony Lindgren X-Patchwork-Id: 747497 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=atomide.com header.i=@atomide.com header.b="N7Ia6NIu" Received: from mail5.25mail.st (mail5.25mail.st [74.50.62.9]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id E4BDC10CA; Sat, 25 Nov 2023 01:44:20 -0800 (PST) Received: from localhost (91-158-86-216.elisa-laajakaista.fi [91.158.86.216]) by mail5.25mail.st (Postfix) with ESMTPSA id A464A60BB9; Sat, 25 Nov 2023 09:44:03 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=atomide.com; s=25mailst; t=1700905460; bh=DcUhj4XEY8fud/bB8kk0KiARyPJ8Izzt0h6YBxqhGNg=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=N7Ia6NIu6xardaP3u8SWdphrKmSYo3ZOI18Ifpjl/1pKzPJNwsU9A6V9xYuV6kySA uGToM9vA+9bugC2YwkvzEGSjfVZLt210Z1F0UTHV0QeBh+NNCfmVB8fRr/hufyaIeo zpUI5ZmlU9wWyfNHIo1Dmj0nfnkdiqrqpBlGe15mQvEtRW1u7Ptlgoi9m3lYBI3p25 2SvraVLoq6NUltpuyPYR5rOPpTUG96ZHs6J9N5+0kII62JrUs0P/uZIwDFi5hzhY8p G3lcpnpJE5fUMy1iyDcdQQSOC1tIGvKRKW/x0KA5zotcn1erv8fI189rt5V401vntb JnYlo3DLYlC4w== From: Tony Lindgren To: linux-omap@vger.kernel.org Cc: =?utf-8?q?Beno=C3=AEt_Cousson?= , Carl Philipp Klemm , Ivaylo Dimitrov , Merlijn Wajer , Pavel Machek , Sebastian Reichel , devicetree@vger.kernel.org Subject: [PATCH 4/4] ARM: dts: motorola-mapphone: Add basic support for mz609 and mz617 Date: Sat, 25 Nov 2023 11:42:48 +0200 Message-ID: <20231125094248.43537-4-tony@atomide.com> X-Mailer: git-send-email 2.42.1 In-Reply-To: <20231125094248.43537-1-tony@atomide.com> References: <20231125094248.43537-1-tony@atomide.com> Precedence: bulk X-Mailing-List: linux-omap@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 The Motorola mapphone tablets are similar to the mapphone phones, but with different display and without some phone related peripherals. Let's add a new motorola-mapphone-mz607-mz617.dtsi and basic files for xyboard mz609 and mz617. All the tablets from mz607 to mz617 are quite similar so let's use motorola-mapphone-mz607-mz617.dtsi naming for the common file. Note that the tc358765 lcd bridge needs driver changes before it can be added. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/ti/omap/Makefile | 4 +- .../omap/motorola-mapphone-mz607-mz617.dtsi | 21 +++++++++ .../boot/dts/ti/omap/omap4-xyboard-mz609.dts | 46 +++++++++++++++++++ .../boot/dts/ti/omap/omap4-xyboard-mz617.dts | 17 +++++++ 4 files changed, 87 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi create mode 100644 arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts create mode 100644 arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts diff --git a/arch/arm/boot/dts/ti/omap/Makefile b/arch/arm/boot/dts/ti/omap/Makefile --- a/arch/arm/boot/dts/ti/omap/Makefile +++ b/arch/arm/boot/dts/ti/omap/Makefile @@ -79,7 +79,9 @@ dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-sdp.dtb \ omap4-sdp-es23plus.dtb \ omap4-var-dvk-om44.dtb \ - omap4-var-stk-om44.dtb + omap4-var-stk-om44.dtb \ + omap4-xyboard-mz609.dtb \ + omap4-xyboard-mz617.dtb dtb-$(CONFIG_SOC_AM33XX) += \ am335x-baltos-ir2110.dtb \ am335x-baltos-ir3220.dtb \ diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi new file mode 100644 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include "motorola-mapphone-common.dtsi" + +&keypad { + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = , + ; +}; + +/* + * On tablets, mmc1 regulator is vsimcard instead of vwlan2 in the stock kernel + * dtb. The regulator may not be wired even if a MMC cage is added though. + */ +&mmc1 { + vmmc-supply = <&vsimcard>; + bus-width = <4>; + cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* gpio_176 */ +}; diff --git a/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts new file mode 100644 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include "motorola-mapphone-mz607-mz617.dtsi" + +/ { + model = "Motorola Xyboard MZ609"; + compatible = "motorola,xyboard-mz609", "ti,omap4430", "ti,omap4"; + + chosen { + stdout-path = &uart3; + }; + + aliases { + display1 = &hdmi0; + }; + + backlight: backlight { + compatible = "led-backlight"; + + leds = <&backlight_led>; + brightness-levels = <31 63 95 127 159 191 223 255>; + default-brightness-level = <6>; + }; +}; + +&i2c1 { + led-controller@38 { + compatible = "ti,lm3532"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x38>; + + enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + + ramp-up-us = <1024>; + ramp-down-us = <8193>; + + backlight_led: led@0 { + reg = <0>; + led-sources = <2>; + ti,led-mode = <0>; + label = ":backlight"; + }; + }; +}; diff --git a/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts new file mode 100644 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include "motorola-mapphone-mz607-mz617.dtsi" + +/ { + model = "Motorola Xyboard MZ617"; + compatible = "motorola,xyboard-mz617", "ti,omap4430", "ti,omap4"; + + chosen { + stdout-path = &uart3; + }; + + aliases { + display1 = &hdmi0; + }; +};