From patchwork Wed Dec 13 20:33:57 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Andr=C3=A9_Apitzsch?= X-Patchwork-Id: 753587 Received: from smtprelay04.ispgateway.de (smtprelay04.ispgateway.de [80.67.31.38]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C9CE9A3; Wed, 13 Dec 2023 12:40:40 -0800 (PST) Received: from [92.206.191.209] (helo=note-book.lan) by smtprelay04.ispgateway.de with esmtpsa (TLS1.2) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.96.1) (envelope-from ) id 1rDVw2-0004Kq-1w; Wed, 13 Dec 2023 21:34:26 +0100 From: =?utf-8?q?Andr=C3=A9_Apitzsch?= Date: Wed, 13 Dec 2023 21:33:57 +0100 Subject: [PATCH 1/2] dt-bindings: arm: qcom: Add Motorola Moto G 4G Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231213-peregrine-v1-1-5229e21bca3f@apitzsch.eu> References: <20231213-peregrine-v1-0-5229e21bca3f@apitzsch.eu> In-Reply-To: <20231213-peregrine-v1-0-5229e21bca3f@apitzsch.eu> To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, phone-devel@vger.kernel.org, ~postmarketos/upstreaming@lists.sr.ht, =?utf-8?q?Andr=C3=A9_Apitzsch?= X-Mailer: b4 0.12.4 X-Df-Sender: YW5kcmVAYXBpdHpzY2guZXU= X-Spam-Level: * Document the compatible for the MSM8926-based Motorola Moto G 4G smartphone. Signed-off-by: André Apitzsch Acked-by: Krzysztof Kozlowski --- Documentation/devicetree/bindings/arm/qcom.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index c968412d86b8..91dc3205d09e 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -185,6 +185,7 @@ properties: - enum: - microsoft,superman-lte - microsoft,tesla + - motorola,peregrine - const: qcom,msm8926 - const: qcom,msm8226 From patchwork Wed Dec 13 20:33:58 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Andr=C3=A9_Apitzsch?= X-Patchwork-Id: 753991 X-Greylist: delayed 137 seconds by postgrey-1.37 at lindbergh.monkeyblade.net; Wed, 13 Dec 2023 12:40:24 PST Received: from smtprelay04.ispgateway.de (smtprelay04.ispgateway.de [80.67.31.38]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 56F109C; Wed, 13 Dec 2023 12:40:24 -0800 (PST) Received: from [92.206.191.209] (helo=note-book.lan) by smtprelay04.ispgateway.de with esmtpsa (TLS1.2) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.96.1) (envelope-from ) id 1rDVw3-0004Kq-1w; Wed, 13 Dec 2023 21:34:27 +0100 From: =?utf-8?q?Andr=C3=A9_Apitzsch?= Date: Wed, 13 Dec 2023 21:33:58 +0100 Subject: [PATCH 2/2] ARM: dts: qcom: msm8926-motorola-peregrine: Add initial device tree Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231213-peregrine-v1-2-5229e21bca3f@apitzsch.eu> References: <20231213-peregrine-v1-0-5229e21bca3f@apitzsch.eu> In-Reply-To: <20231213-peregrine-v1-0-5229e21bca3f@apitzsch.eu> To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, phone-devel@vger.kernel.org, ~postmarketos/upstreaming@lists.sr.ht, =?utf-8?q?Andr=C3=A9_Apitzsch?= X-Mailer: b4 0.12.4 X-Df-Sender: YW5kcmVAYXBpdHpzY2guZXU= X-Spam-Level: * This dts adds support for Motorola Moto G 4G released in 2013. Add a device tree with initial support for: - GPIO keys - Hall sensor - SDHCI - Vibrator Signed-off-by: André Apitzsch --- arch/arm/boot/dts/qcom/Makefile | 1 + .../dts/qcom/qcom-msm8926-motorola-peregrine.dts | 297 +++++++++++++++++++++ 2 files changed, 298 insertions(+) diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile index 0cb272f4fa45..9cc1e14e6cd0 100644 --- a/arch/arm/boot/dts/qcom/Makefile +++ b/arch/arm/boot/dts/qcom/Makefile @@ -35,6 +35,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8926-htc-memul.dtb \ qcom-msm8926-microsoft-superman-lte.dtb \ qcom-msm8926-microsoft-tesla.dtb \ + qcom-msm8926-motorola-peregrine.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8960-samsung-expressatt.dtb \ qcom-msm8974-lge-nexus5-hammerhead.dtb \ diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts new file mode 100644 index 000000000000..3c5256120502 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts @@ -0,0 +1,297 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" + +/delete-node/ &smem_region; + +/ { + model = "Motorola Moto G 4G"; + compatible = "motorola,peregrine", "qcom,msm8926", "qcom,msm8226"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + }; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer0: framebuffer@3200000 { + compatible = "simple-framebuffer"; + reg = <0x03200000 0x800000>; + width = <720>; + height = <1280>; + stride = <(720 * 3)>; + format = "r8g8b8"; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + label = "GPIO Hall Effect Sensor"; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 51 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + linux,can-disable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@3200000 { + reg = <0x03200000 0x800000>; + no-map; + }; + + smem_region: smem@fa00000 { + reg = <0x0fa00000 0x100000>; + no-map; + }; + }; +}; + +&blsp1_i2c3 { + status = "okay"; + + sensor@48 { + compatible = "ti,tmp108"; + reg = <0x48>; + }; +}; + +&blsp1_uart3 { + status = "okay"; +}; + +&pm8226_resin { + linux,code = ; + status = "okay"; +}; + +&pm8226_vib { + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + }; + + pm8226_lvs1: lvs1 { + /* Pull-up for I2C lines */ + regulator-always-on; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8226_l18>; + vqmmc-supply = <&pm8226_l21>; + + bus-width = <4>; + cd-gpios = <&tlmm 115 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&smbb { + qcom,fast-charge-safe-current = <2000000>; + qcom,fast-charge-current-limit = <1900000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,minimum-input-voltage = <4300000>; + + status = "okay"; +}; + +&usb { + extcon = <&smbb>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +};