From patchwork Thu Jan 25 16:58:20 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kamel BOUHARA X-Patchwork-Id: 767051 Received: from relay2-d.mail.gandi.net (relay2-d.mail.gandi.net [217.70.183.194]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 45ED513172A; Thu, 25 Jan 2024 16:58:32 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.194 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1706201916; cv=none; b=O5yOstrVWamXOsa4yl1NfFdbt5HzuEYQU6F+RPYpgEKDqCPXMU5JoSXP28W1sV15I7EbjMapKSBXN0UvsFVRLS5MpLwubigjmrtrsigBUqVi7IUG8gliNg+1NyzgCarqU+8RIAHLIYWwsOJBmVn38HMYiJBvwCR4lBLh6GI5U4o= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1706201916; c=relaxed/simple; bh=ftYyY7Zc0GLvORveIykVesb2lWTOJKgcNDMC8Thqcgk=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=itjlE6Y+AsxHCrGlYi3Og141B9d0rtvriBVWUrsTizF6rYpx7dpBZdNWlDfP2hl7UqPHZuGwEkRHabcXevSrdb2PGa9uNEyLxpUwwdjakc/IVAMGA7Yo2zhrDMP/AMcMrkwEo2pwYkOxEBI6cv+JrDaz+SexPr5G7UQbNQSM6sA= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=BOX/kR/7; arc=none smtp.client-ip=217.70.183.194 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="BOX/kR/7" Received: by mail.gandi.net (Postfix) with ESMTPSA id 3FD8840004; Thu, 25 Jan 2024 16:58:30 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1706201910; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=PyU0MrPkAquO0yDvZ3LG19USjtRAx9Zi0FGDGYHw/pQ=; b=BOX/kR/7DqL3r+TH7AAMXF4PNZ0gmi/t35jIsChJdfpEiBIwJCUaawaxWFpuk00yMzWGRF 8DNWxMrLBsBUkz0i7scwBUzVSCqnc49s0MWGYeYHOA6jbG/KXm4ImTuz3GYKFAsFBBD0R3 qBApQURvhRF8Aue1pzj1jWj4W3NabuOiqZacHLesnucyP9wvCFth3hb/WfE7OJmDZlDnKb YC/0aHqo839Q1wTN/I6AooFOk+M/RNnjXsPAu1q8GQPk5ObNqBVds3X3OcdH/vMRk8qbas mtUmt4fq8eVpLNA3b1Zo0fm/Pdj6DmqTOEuWz3TMVmmOvze9ybvuh0CRxJU0rA== From: Kamel Bouhara To: Dmitry Torokhov , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Henrik Rydberg , linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Marco Felsch , Jeff LaBundy Cc: catalin.popescu@leica-geosystems.com, mark.satterthwaite@touchnetix.com, Thomas Petazzoni , Gregory Clement , bsp-development.geo@leica-geosystems.com, Kamel Bouhara , Krzysztof Kozlowski Subject: [PATCH v6 1/3] dt-bindings: vendor-prefixes: Add TouchNetix AS Date: Thu, 25 Jan 2024 17:58:20 +0100 Message-ID: <20240125165823.996910-2-kamel.bouhara@bootlin.com> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20240125165823.996910-1-kamel.bouhara@bootlin.com> References: <20240125165823.996910-1-kamel.bouhara@bootlin.com> Precedence: bulk X-Mailing-List: linux-input@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-GND-Sasl: kamel.bouhara@bootlin.com Add vendor prefix for TouchNetix AS (https://www.touchnetix.com/products/). Signed-off-by: Kamel Bouhara Acked-by: Krzysztof Kozlowski --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 573578db9509..78581001a79c 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -1400,6 +1400,8 @@ patternProperties: description: Toradex AG "^toshiba,.*": description: Toshiba Corporation + "^touchnetix,.*": + description: TouchNetix AS "^toumaz,.*": description: Toumaz "^tpk,.*": From patchwork Thu Jan 25 16:58:21 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kamel BOUHARA X-Patchwork-Id: 766189 Received: from relay6-d.mail.gandi.net (relay6-d.mail.gandi.net [217.70.183.198]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 7428B130E4F; Thu, 25 Jan 2024 16:58:34 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.198 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1706201917; cv=none; b=GgFc2juWnINsDkcw9Rlk+3iKwrhw6Ptu3eLOcIKVwxof682hhB6iacdNSXRbA1l9I+X4M28yoi9JyttS4HUlon7al2MY6V0MOefIaYGJ4bFJk7VpHkbuLHT7CCM2fHY9hQsYB40uO7xfayAkB5TpN2nBhp/Vwezy7osYKMKrR0c= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1706201917; c=relaxed/simple; bh=34I2TzE6pPxcxeAktNAgVF69e5f8gw9GO2UUBSYi4I8=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=KdbXmD/+XkE6ggvdSW+It5T4STRVDGaxpeJURi5w81785fRLxMjtOzp/PYbIHuFy47q2Os6xkJWK5GcF1660f1zhkJkGLOOkXy5nHLS/G4IsJ9r1eDCNsekbtR/Qlyp9lD/mgRgJCxCcCHCAUbU2yz9VGYzHsXt84Ut3Ahz3Y7E= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=V/ztUaxx; arc=none smtp.client-ip=217.70.183.198 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="V/ztUaxx" Received: by mail.gandi.net (Postfix) with ESMTPSA id 76BEAC0002; Thu, 25 Jan 2024 16:58:31 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1706201912; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=foL/GX/UZVkyGwenKRmQ87OjZHOFjGP4EogO0kNEEEM=; b=V/ztUaxxhFKNxhXEOwWLqEk3km0/sTmRcqjsdRRKDcB6gaG9b0byGeZzGqAV8LGuBuvz7S Bd79wueVJQpZr1MkqvcaJz/QzWhcfbVne+qSp1IowQKQVpZ5EhrJqwgemqAazoWI5owHhA cW4M6NO0TY8INRIORWOnD3cXLZCgLcggco7A3pKOvhqMJ2HbzczHX20xTYclzDKfpoWlQM marxuUtvFnnNhOeF+r5KlXQh4hPDnkgTXsUC2VepBr1SGM0LTqOHXLVrxeKm90HjVMDsf7 sK2b3SPac4O0vJ0HV51tKxFdMTYE6/B1cYr4X0BGDqBTvkOx8Cxf0hkd25uA6A== From: Kamel Bouhara To: Dmitry Torokhov , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Henrik Rydberg , linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Marco Felsch , Jeff LaBundy Cc: catalin.popescu@leica-geosystems.com, mark.satterthwaite@touchnetix.com, Thomas Petazzoni , Gregory Clement , bsp-development.geo@leica-geosystems.com, Kamel Bouhara Subject: [PATCH v6 2/3] dt-bindings: input: Add TouchNetix axiom touchscreen Date: Thu, 25 Jan 2024 17:58:21 +0100 Message-ID: <20240125165823.996910-3-kamel.bouhara@bootlin.com> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20240125165823.996910-1-kamel.bouhara@bootlin.com> References: <20240125165823.996910-1-kamel.bouhara@bootlin.com> Precedence: bulk X-Mailing-List: linux-input@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-GND-Sasl: kamel.bouhara@bootlin.com Add the TouchNetix axiom I2C touchscreen device tree bindings documentation. Signed-off-by: Kamel Bouhara --- .../input/touchscreen/touchnetix,ax54a.yaml | 67 +++++++++++++++++++ MAINTAINERS | 6 ++ 2 files changed, 73 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/touchnetix,ax54a.yaml diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchnetix,ax54a.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchnetix,ax54a.yaml new file mode 100644 index 000000000000..7b3997457fa5 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/touchnetix,ax54a.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/touchnetix,ax54a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TouchNetix Axiom series touchscreen controller + +maintainers: + - Kamel Bouhara + +allOf: + - $ref: /schemas/input/touchscreen/touchscreen.yaml# + - $ref: /schemas/input/input.yaml# + +properties: + compatible: + const: touchnetix,ax54a + + reg: + const: 0x66 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + vdda-supply: + description: Analog power supply regulator on VDDA pin + + vddi-supply: + description: I/O power supply regulator on VDDI pin + + startup-time-ms: + description: delay after power supply regulator is applied in ms + +required: + - compatible + - reg + - vdda-supply + - vddi-supply + - startup-time-ms + +unevaluatedProperties: false + +examples: + - | + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@66 { + compatible = "touchnetix,ax54a"; + reg = <0x66>; + interrupt-parent = <&gpio2>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + vdda-supply = <&vdda_reg>; + vddi-supply = <&vddi_reg>; + poll-interval = <20>; + startup-time-ms = <100>; + }; + }; +... diff --git a/MAINTAINERS b/MAINTAINERS index 7608b714653f..4752d8436dbb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -21431,6 +21431,12 @@ S: Maintained F: Documentation/ABI/testing/sysfs-class-firmware-attributes F: drivers/platform/x86/think-lmi.? +TOUCHNETIX AXIOM I2C TOUCHSCREEN DRIVER +M: Kamel Bouhara +L: linux-input@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/input/touchscreen/touchnetix,ax54a.yaml + THUNDERBOLT DMA TRAFFIC TEST DRIVER M: Isaac Hazan L: linux-usb@vger.kernel.org From patchwork Thu Jan 25 16:58:22 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kamel BOUHARA X-Patchwork-Id: 767050 Received: from relay8-d.mail.gandi.net (relay8-d.mail.gandi.net [217.70.183.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id ECF09145327; Thu, 25 Jan 2024 16:58:40 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1706201924; cv=none; b=IxM+JwkyT7GdebORr4+zaHhMwN3ZzAgl72GCCHo3mnzg6qlg7r4+vpOlYdm9SCpv5YxR9GCUbJpuBFNTqGZYbXR4oYWRY4MrsOkKUqJ20cP0ZApvh1UBHLDZGHUHdVnyrLtHoALHAOiFVbbelzxciOKuO1lYmroHsBEErKTCPg4= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1706201924; c=relaxed/simple; bh=tPj9SRCghP8g0cWtsmtP35XInBDncbFYTAM+gQe3LVc=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=EthvzPuvhsJZbQOqfBlQhApKjNHttuvo7g+dwEpBI9uSm9g1MezA+X1ockoQS3ZxZXeUOmv3WQgZiRrGtB6MxedfXXukEgFdpQa8LyzoEQwFymnCAKSU5UoarRuCOo2C2MI4ODw8onsUV6GW3EGYzIS/omkjDdVqFQKW/slGT1Y= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=J5D70QqX; arc=none smtp.client-ip=217.70.183.201 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="J5D70QqX" Received: by mail.gandi.net (Postfix) with ESMTPSA id BE2D71BF20A; Thu, 25 Jan 2024 16:58:32 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1706201913; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=l2xc4A/4Wlv3AqJC+o+6xQ6GE5XimsVfYzoPpmdlLQg=; b=J5D70QqXg59M3GwxWBslxs7z7TZZEXrNn2FA37GayauLEBFXM+Rl8ehlxMdcvr/fZhQ0Pb BFA881bD0EOCJYDvUcyQb5f5a4lUZohssN8fYEHK520MgQfsTfMZs+6g8DlGWIE9fdDQuP zPbLHmpdqn++40B2OGely6lAkOJh9c9dIH9L7qotntZ/T8bJ1H9cmvn1r6Xzy6pnhCTYPU 088BwABK9jpQnRkw5KKS192cTxmKa8qV+nJl75YD2CGGNbSqJdHd4GcUl8fTrQYad4wFeU ZOb2aCPCxlUQpm6NOLbFhA9xLQ/y6gaD/wyfrkDfdzybkw/4C08pxjzYeEBOBA== From: Kamel Bouhara To: Dmitry Torokhov , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Henrik Rydberg , linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Marco Felsch , Jeff LaBundy Cc: catalin.popescu@leica-geosystems.com, mark.satterthwaite@touchnetix.com, Thomas Petazzoni , Gregory Clement , bsp-development.geo@leica-geosystems.com, Kamel Bouhara Subject: [PATCH v6 3/3] Input: Add TouchNetix axiom i2c touchscreen driver Date: Thu, 25 Jan 2024 17:58:22 +0100 Message-ID: <20240125165823.996910-4-kamel.bouhara@bootlin.com> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20240125165823.996910-1-kamel.bouhara@bootlin.com> References: <20240125165823.996910-1-kamel.bouhara@bootlin.com> Precedence: bulk X-Mailing-List: linux-input@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-GND-Sasl: kamel.bouhara@bootlin.com Add a new driver for the TouchNetix's axiom family of touchscreen controllers. This driver only supports i2c and can be later adapted for SPI and USB support. Signed-off-by: Kamel Bouhara --- MAINTAINERS | 1 + drivers/input/touchscreen/Kconfig | 12 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/touchnetix_axiom.c | 664 +++++++++++++++++++ 4 files changed, 678 insertions(+) create mode 100644 drivers/input/touchscreen/touchnetix_axiom.c diff --git a/MAINTAINERS b/MAINTAINERS index 4752d8436dbb..337ddac6c74b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -21436,6 +21436,7 @@ M: Kamel Bouhara L: linux-input@vger.kernel.org S: Maintained F: Documentation/devicetree/bindings/input/touchscreen/touchnetix,ax54a.yaml +F: drivers/input/touchscreen/touchnetix_axiom.c THUNDERBOLT DMA TRAFFIC TEST DRIVER M: Isaac Hazan diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index e3e2324547b9..f36bee8d8696 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -803,6 +803,18 @@ config TOUCHSCREEN_MIGOR To compile this driver as a module, choose M here: the module will be called migor_ts. +config TOUCHSCREEN_TOUCHNETIX_AXIOM + tristate "TouchNetix AXIOM based touchscreen controllers" + depends on I2C + help + Say Y here if you have a axiom touchscreen connected to + your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called axiom. + config TOUCHSCREEN_TOUCHRIGHT tristate "Touchright serial touchscreen" select SERIO diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 62bd24f3ac8e..8e32a2df5e18 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -88,6 +88,7 @@ obj-$(CONFIG_TOUCHSCREEN_SUR40) += sur40.o obj-$(CONFIG_TOUCHSCREEN_SURFACE3_SPI) += surface3_spi.o obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC) += ti_am335x_tsc.o obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o +obj-$(CONFIG_TOUCHSCREEN_TOUCHNETIX_AXIOM) += touchnetix_axiom.o obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o obj-$(CONFIG_TOUCHSCREEN_TS4800) += ts4800-ts.o diff --git a/drivers/input/touchscreen/touchnetix_axiom.c b/drivers/input/touchscreen/touchnetix_axiom.c new file mode 100644 index 000000000000..cbb5525b83f5 --- /dev/null +++ b/drivers/input/touchscreen/touchnetix_axiom.c @@ -0,0 +1,664 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * TouchNetix axiom Touchscreen Driver + * + * Copyright (C) 2020-2023 TouchNetix Ltd. + * + * Author(s): Bart Prescott + * Pedro Torruella + * Mark Satterthwaite + * Hannah Rossiter + * Kamel Bouhara + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#define AXIOM_PROX_LEVEL -128 +#define AXIOM_DMA_OPS_DELAY_USEC 250 +/* + * Register group u31 has 2 pages for usage table entries. + */ +#define AXIOM_U31_MAX_USAGES 0xff +#define AXIOM_U31_BYTES_PER_USAGE 6 +#define AXIOM_U31_PAGE0_LENGTH 0x0C +#define AXIOM_U31_BOOTMODE_MASK BIT(7) +#define AXIOM_U31_DEVID_MASK GENMASK(14, 0) + +#define AXIOM_MAX_REPORT_LEN 0x7f + +#define AXIOM_CMD_HEADER_READ_MASK BIT(15) +#define AXIOM_U41_MAX_TARGETS 10 + +#define AXIOM_U46_AUX_CHANNELS 4 +#define AXIOM_U46_AUX_MASK GENMASK(11, 0) + +#define AXIOM_COMMS_MAX_USAGE_PAGES 3 +#define AXIOM_COMMS_PAGE_SIZE 256 +#define AXIOM_COMMS_REPORT_LEN_MASK GENMASK(6, 0) + +#define AXIOM_REPORT_USAGE_ID 0x34 +#define AXIOM_DEVINFO_USAGE_ID 0x31 +#define AXIOM_USAGE_2HB_REPORT_ID 0x01 +#define AXIOM_USAGE_2AUX_REPORT_ID 0x46 +#define AXIOM_USAGE_2DCTS_REPORT_ID 0x41 + +#define AXIOM_PAGE_OFFSET_MASK GENMASK(6, 0) + +struct axiom_devinfo { + __le16 device_id; + u8 fw_minor; + u8 fw_major; + u8 fw_info_extra; + u8 tcp_revision; + u8 bootloader_fw_minor; + u8 bootloader_fw_major; + __le16 jedec_id; + u8 num_usages; +} __packed; + +/* + * Describes parameters of a specific usage, essentially a single element of + * the "Usage Table" + */ +struct axiom_usage_entry { + u8 id; + u8 is_report; + u8 start_page; + u8 num_pages; +}; + +/* + * Represents state of a touch or target when detected prior to a touch (eg. + * hover or proximity events). + */ +enum axiom_target_state { + AXIOM_TARGET_STATE_NOT_PRESENT = 0, + AXIOM_TARGET_STATE_PROX = 1, + AXIOM_TARGET_STATE_HOVER = 2, + AXIOM_TARGET_STATE_TOUCHING = 3, +}; + +struct axiom_u41_target { + enum axiom_target_state state; + u16 x; + u16 y; + s8 z; + bool insert; + bool touch; +}; + +struct axiom_target_report { + u8 index; + u8 present; + u16 x; + u16 y; + s8 z; +}; + +struct axiom_cmd_header { + __le16 target_address; + __le16 length; +} __packed; + +struct axiom_data { + struct axiom_devinfo devinfo; + struct device *dev; + struct gpio_desc *reset_gpio; + struct i2c_client *client; + struct input_dev *input_dev; + u32 max_report_len; + u8 rx_buf[AXIOM_COMMS_MAX_USAGE_PAGES * AXIOM_COMMS_PAGE_SIZE]; + struct axiom_u41_target targets[AXIOM_U41_MAX_TARGETS]; + struct axiom_usage_entry usage_table[AXIOM_U31_MAX_USAGES]; + bool usage_table_populated; + struct regulator *vdda; + struct regulator *vddi; + struct regmap *regmap; + struct touchscreen_properties prop; +}; + +static const struct regmap_config axiom_i2c_regmap_config = { + .reg_bits = 32, + .reg_format_endian = REGMAP_ENDIAN_LITTLE, + .val_bits = 8, + .val_format_endian = REGMAP_ENDIAN_LITTLE, +}; + +/* + * axiom devices are typically configured to report touches at a rate + * of 100Hz (10ms) for systems that require polling for reports. + * When reports are polled, it will be expected to occasionally + * observe the overflow bit being set in the reports. + * This indicates that reports are not being read fast enough. + */ +#define POLL_INTERVAL_DEFAULT_MS 10 + +/* Translate usage/page/offset triplet into physical address. */ +static u16 axiom_usage_to_target_address(struct axiom_data *ts, u8 usage, u8 page, + char offset) +{ + /* At the moment the convention is that u31 is always at physical address 0x0 */ + if (!ts->usage_table_populated) { + if (usage == AXIOM_DEVINFO_USAGE_ID) + return ((page << 8) + offset); + else + return 0xffff; + } + + if (page >= ts->usage_table[usage].num_pages) { + dev_err(ts->dev, "Invalid usage table! usage: u%02x, page: %02x, offset: %02x\n", + usage, page, offset); + return 0xffff; + } + + return ((ts->usage_table[usage].start_page + page) << 8) + offset; +} + +static int axiom_read(struct axiom_data *ts, u8 usage, u8 page, void *buf, u16 len) +{ + struct axiom_cmd_header cmd_header; + int ret; + + cmd_header.target_address = cpu_to_le16(axiom_usage_to_target_address(ts, usage, page, 0)); + cmd_header.length = cpu_to_le16(len | AXIOM_CMD_HEADER_READ_MASK); + + __le32 preamble = get_unaligned_le32((u8 *)&cmd_header); + + ret = regmap_write(ts->regmap, preamble, 0); + if (ret) { + dev_err(ts->dev, "failed to write preamble, error %d\n", ret); + return ret; + } + + ret = regmap_raw_read(ts->regmap, 0, buf, len); + if (ret) { + dev_err(ts->dev, "failed to read target address %04x, error %d\n", + cmd_header.target_address, ret); + return ret; + } + + /* Wait device's DMA operations */ + usleep_range(AXIOM_DMA_OPS_DELAY_USEC, AXIOM_DMA_OPS_DELAY_USEC + 50); + + return 0; +} + +/* + * One of the main purposes for reading the usage table is to identify + * which usages reside at which target address. + * When performing subsequent reads or writes to AXIOM, the target address + * is used to specify which usage is being accessed. + * Consider the following discovery code which will build up the usage table. + */ +static u32 axiom_populate_usage_table(struct axiom_data *ts) +{ + struct axiom_usage_entry *usage_table; + u8 *rx_data = ts->rx_buf; + u32 max_report_len; + u32 usage_id; + int error; + + usage_table = ts->usage_table; + + /* Read the second page of usage u31 to get the usage table */ + error = axiom_read(ts, AXIOM_DEVINFO_USAGE_ID, 1, rx_data, + (AXIOM_U31_BYTES_PER_USAGE * ts->devinfo.num_usages)); + + if (error) + return error; + + for (usage_id = 1; usage_id < AXIOM_U31_MAX_USAGES; usage_id++) { + u16 offset = (usage_id * AXIOM_U31_BYTES_PER_USAGE); + u8 id = rx_data[offset + 0]; + u8 start_page = rx_data[offset + 1]; + u8 num_pages = rx_data[offset + 2]; + u32 max_offset = ((rx_data[offset + 3] & AXIOM_PAGE_OFFSET_MASK) + 1) * 2; + + if (!num_pages) + usage_table[id].is_report = true; + + /* Store the entry into the usage table */ + usage_table[id].id = id; + usage_table[id].start_page = start_page; + usage_table[id].num_pages = num_pages; + + dev_dbg(ts->dev, "Usage u%02x Info: %*ph\n", id, AXIOM_U31_BYTES_PER_USAGE, + &rx_data[offset]); + + /* Identify the max report length the module will receive */ + if (usage_table[id].is_report && max_offset > max_report_len) + max_report_len = max_offset; + } + + ts->usage_table_populated = true; + + return max_report_len; +} + +static int axiom_discover(struct axiom_data *ts) +{ + int error; + + /* + * Fetch the first page of usage u31 to get the + * device information and the number of usages + */ + error = axiom_read(ts, AXIOM_DEVINFO_USAGE_ID, 0, &ts->devinfo, AXIOM_U31_PAGE0_LENGTH); + if (error) + return error; + + dev_dbg(ts->dev, " Boot Mode : %s\n", + FIELD_GET(AXIOM_U31_BOOTMODE_MASK, + le16_to_cpu(ts->devinfo.device_id)) ? "BLP" : "TCP"); + dev_dbg(ts->dev, " Device ID : %04lx\n", + FIELD_GET(AXIOM_U31_DEVID_MASK, le16_to_cpu(ts->devinfo.device_id))); + dev_dbg(ts->dev, " Firmware Rev : %02x.%02x\n", ts->devinfo.fw_major, + ts->devinfo.fw_minor); + dev_dbg(ts->dev, " Bootloader Rev : %02x.%02x\n", ts->devinfo.bootloader_fw_major, + ts->devinfo.bootloader_fw_minor); + dev_dbg(ts->dev, " FW Extra Info : %04x\n", ts->devinfo.fw_info_extra); + dev_dbg(ts->dev, " Silicon : %04x\n", le16_to_cpu(ts->devinfo.jedec_id)); + dev_dbg(ts->dev, " Number usages : %04x\n", ts->devinfo.num_usages); + + ts->max_report_len = axiom_populate_usage_table(ts); + if (!ts->max_report_len || !ts->devinfo.num_usages || + ts->max_report_len > AXIOM_MAX_REPORT_LEN) { + dev_err(ts->dev, "Invalid report length or usages number"); + return -EINVAL; + } + + dev_dbg(ts->dev, "Max Report Length: %u\n", ts->max_report_len); + + return 0; +} + +/* + * Support function to axiom_process_u41_report. + * Generates input-subsystem events for every target. + * After calling this function the caller shall issue + * a Sync to the input sub-system. + */ +static bool axiom_process_u41_report_target(struct axiom_data *ts, + struct axiom_target_report *target) +{ + struct input_dev *input_dev = ts->input_dev; + struct axiom_u41_target *target_prev_state; + enum axiom_target_state current_state; + int slot; + + /* Verify the target index */ + if (target->index >= AXIOM_U41_MAX_TARGETS) { + dev_err(ts->dev, "Invalid target index! %u\n", target->index); + return false; + } + + target_prev_state = &ts->targets[target->index]; + + current_state = AXIOM_TARGET_STATE_NOT_PRESENT; + + if (target->present) { + if (target->z >= 0) + current_state = AXIOM_TARGET_STATE_TOUCHING; + else if (target->z > AXIOM_PROX_LEVEL && target->z < 0) + current_state = AXIOM_TARGET_STATE_HOVER; + else if (target->z == AXIOM_PROX_LEVEL) + current_state = AXIOM_TARGET_STATE_PROX; + } + + if (target_prev_state->state == current_state && + target_prev_state->x == target->x && + target_prev_state->y == target->y && + target_prev_state->z == target->z) + return false; + + slot = target->index; + + dev_dbg(ts->dev, "U41 Target T%u, slot:%u present:%u, x:%u, y:%u, z:%d\n", + target->index, slot, target->present, + target->x, target->y, target->z); + + switch (current_state) { + case AXIOM_TARGET_STATE_NOT_PRESENT: + case AXIOM_TARGET_STATE_PROX: + if (!target_prev_state->insert) + break; + target_prev_state->insert = false; + input_mt_slot(input_dev, slot); + + if (!slot) + input_report_key(input_dev, BTN_TOUCH, 0); + + input_mt_report_slot_inactive(input_dev); + /* + * make sure the previous coordinates are + * all off screen when the finger comes back + */ + target->x = 65535; + target->y = 65535; + target->z = AXIOM_PROX_LEVEL; + break; + case AXIOM_TARGET_STATE_HOVER: + case AXIOM_TARGET_STATE_TOUCHING: + target_prev_state->insert = true; + input_mt_slot(input_dev, slot); + input_report_abs(input_dev, ABS_MT_TRACKING_ID, slot); + input_report_abs(input_dev, ABS_MT_POSITION_X, target->x); + input_report_abs(input_dev, ABS_MT_POSITION_Y, target->y); + + if (current_state == AXIOM_TARGET_STATE_TOUCHING) { + input_report_abs(input_dev, ABS_MT_DISTANCE, 0); + input_report_abs(input_dev, ABS_DISTANCE, 0); + input_report_abs(input_dev, ABS_MT_PRESSURE, target->z); + input_report_abs(input_dev, ABS_PRESSURE, target->z); + } else { + input_report_abs(input_dev, ABS_MT_DISTANCE, -target->z); + input_report_abs(input_dev, ABS_DISTANCE, -target->z); + input_report_abs(input_dev, ABS_MT_PRESSURE, 0); + input_report_abs(input_dev, ABS_PRESSURE, 0); + } + + if (!slot) + input_report_key(input_dev, BTN_TOUCH, (current_state == + AXIOM_TARGET_STATE_TOUCHING)); + break; + default: + break; + } + + target_prev_state->state = current_state; + target_prev_state->x = target->x; + target_prev_state->y = target->y; + target_prev_state->z = target->z; + + return true; +} + +/* + * U41 is the output report of the 2D CTS and contains the status of targets + * (including contacts and pre-contacts) along with their X,Y,Z values. + * When a target has been removed (no longer detected), + * the corresponding X,Y,Z values will be zeroed. + */ +static bool axiom_process_u41_report(struct axiom_data *ts, u8 *rx_buf) +{ + struct axiom_target_report target; + bool update_done = false; + u16 target_status; + int i; + + target_status = get_unaligned_le16(rx_buf + 1); + + for (i = 0; i < AXIOM_U41_MAX_TARGETS; i++) { + u8 *target_step = &rx_buf[i * 4]; + + target.index = i; + target.present = ((target_status & (1 << i)) != 0) ? 1 : 0; + target.x = get_unaligned_le16(target_step + 3); + target.y = get_unaligned_le16(target_step + 5); + target.z = (s8)(rx_buf[i + 43]); + update_done |= axiom_process_u41_report_target(ts, &target); + } + + return update_done; +} + +/* + * U46 report contains a low level measurement data generated by the capacitive + * displacement sensor (CDS) algorithms from the auxiliary channels. + * This information is useful when tuning multi-press to assess mechanical + * consistency in the unit's construction. + */ +static void axiom_process_u46_report(struct axiom_data *ts, u8 *rx_buf) +{ + struct input_dev *input_dev = ts->input_dev; + u32 event_value; + u16 aux_value; + int i; + + for (i = 0; i < AXIOM_U46_AUX_CHANNELS; i++) { + u8 *target_step = &rx_buf[i * 2]; + + aux_value = get_unaligned_le16(target_step + 1) & AXIOM_U46_AUX_MASK; + event_value = (i << 16) | (aux_value); + input_event(input_dev, EV_MSC, MSC_RAW, event_value); + } +} + +/* + * Validates the crc and demultiplexes the axiom reports to the appropriate + * report handler + */ +static int axiom_handle_events(struct axiom_data *ts) +{ + struct input_dev *input_dev = ts->input_dev; + u8 *report_data = ts->rx_buf; + struct device *dev = ts->dev; + u16 crc_report; + u16 crc_calc; + int error; + u8 len; + + error = axiom_read(ts, AXIOM_REPORT_USAGE_ID, 0, report_data, ts->max_report_len); + if (error) + return error; + + len = (report_data[0] & AXIOM_COMMS_REPORT_LEN_MASK) << 1; + if (len <= 2) { + dev_err(dev, "Zero length report discarded.\n"); + return -ENODATA; + } + + /* Validate the report CRC */ + u8 *crc_bytes = &report_data[len]; + + crc_report = get_unaligned_le16(crc_bytes - 2); + /* Length is in 16 bit words and remove the size of the CRC16 itself */ + crc_calc = crc16(0, report_data, (len - 2)); + + if (crc_calc != crc_report) { + dev_err(dev, + "CRC mismatch! Expected: %#x, Calculated CRC: %#x.\n", + crc_report, crc_calc); + return -EINVAL; + } + + switch (report_data[1]) { + case AXIOM_USAGE_2DCTS_REPORT_ID: + if (axiom_process_u41_report(ts, &report_data[1])) { + input_mt_sync_frame(input_dev); + input_sync(input_dev); + } + break; + + case AXIOM_USAGE_2AUX_REPORT_ID: + /* This is an aux report (force) */ + axiom_process_u46_report(ts, &report_data[1]); + input_mt_sync(input_dev); + input_sync(input_dev); + break; + + case AXIOM_USAGE_2HB_REPORT_ID: + /* This is a heartbeat report */ + break; + default: + return -EINVAL; + } + + return 0; +} + +static void axiom_i2c_poll(struct input_dev *input_dev) +{ + struct axiom_data *ts = input_get_drvdata(input_dev); + + axiom_handle_events(ts); +} + +static irqreturn_t axiom_irq(int irq, void *dev_id) +{ + struct axiom_data *ts = dev_id; + + axiom_handle_events(ts); + + return IRQ_HANDLED; +} + +static void axiom_reset(struct gpio_desc *reset_gpio) +{ + gpiod_set_value_cansleep(reset_gpio, 1); + usleep_range(1000, 2000); + gpiod_set_value_cansleep(reset_gpio, 0); + msleep(110); +} + +static int axiom_i2c_probe(struct i2c_client *client) +{ + u32 poll_interval = POLL_INTERVAL_DEFAULT_MS; + struct device *dev = &client->dev; + struct input_dev *input_dev; + struct axiom_data *ts; + u32 startup_delay_ms; + int target; + int error; + + ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + i2c_set_clientdata(client, ts); + ts->client = client; + ts->dev = dev; + + ts->regmap = devm_regmap_init_i2c(client, &axiom_i2c_regmap_config); + error = PTR_ERR_OR_ZERO(ts->regmap); + if (error) { + dev_err(dev, "Failed to initialize regmap: %d\n", error); + return error; + } + + ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(ts->reset_gpio)) + return dev_err_probe(dev, PTR_ERR(ts->reset_gpio), "failed to get reset GPIO\n"); + + if (ts->reset_gpio) + axiom_reset(ts->reset_gpio); + + ts->vddi = devm_regulator_get_optional(dev, "vddi"); + if (!IS_ERR(ts->vddi)) { + error = devm_regulator_get_enable(dev, "vddi"); + if (error) + return dev_err_probe(&client->dev, error, + "Failed to enable vddi regulator\n"); + } + + ts->vdda = devm_regulator_get_optional(dev, "vdda"); + if (!IS_ERR(ts->vdda)) { + error = devm_regulator_get_enable(dev, "vdda"); + if (error) + return dev_err_probe(&client->dev, error, + "Failed to enable vdda regulator\n"); + if (!device_property_read_u32(dev, "startup-time-ms", &startup_delay_ms)) + msleep(startup_delay_ms); + } + + error = axiom_discover(ts); + if (error) + return dev_err_probe(dev, error, "Failed touchscreen discover\n"); + + input_dev = devm_input_allocate_device(ts->dev); + if (!input_dev) + return -ENOMEM; + + input_dev->name = "TouchNetix axiom Touchscreen"; + input_dev->phys = "input/axiom_ts"; + + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, 65535, 0, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, 65535, 0, 0); + input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE, 0, MT_TOOL_MAX, 0, 0); + input_set_abs_params(input_dev, ABS_MT_DISTANCE, 0, 127, 0, 0); + input_set_abs_params(input_dev, ABS_MT_PRESSURE, 0, 127, 0, 0); + + touchscreen_parse_properties(input_dev, true, &ts->prop); + + /* Registers the axiom device as a touchscreen instead of a mouse pointer */ + error = input_mt_init_slots(input_dev, AXIOM_U41_MAX_TARGETS, INPUT_MT_DIRECT); + if (error) + return error; + + /* Enables the raw data for up to 4 force channels to be sent to the input subsystem */ + set_bit(EV_REL, input_dev->evbit); + set_bit(EV_MSC, input_dev->evbit); + /* Declare that we support "RAW" Miscellaneous events */ + set_bit(MSC_RAW, input_dev->mscbit); + + ts->input_dev = input_dev; + input_set_drvdata(ts->input_dev, ts); + + /* Ensure that all reports are initialised to not be present. */ + for (target = 0; target < AXIOM_U41_MAX_TARGETS; target++) + ts->targets[target].state = AXIOM_TARGET_STATE_NOT_PRESENT; + + error = input_register_device(input_dev); + if (error) + return dev_err_probe(ts->dev, error, + "Could not register with Input Sub-system.\n"); + + error = devm_request_threaded_irq(dev, client->irq, NULL, + axiom_irq, IRQF_ONESHOT, dev_name(dev), ts); + if (error) { + dev_info(dev, "Request irq failed, falling back to polling mode"); + + error = input_setup_polling(input_dev, axiom_i2c_poll); + if (error) + return dev_err_probe(ts->dev, error, "Unable to set up polling mode\n"); + + if (!device_property_read_u32(ts->dev, "poll-interval", &poll_interval)) + input_set_poll_interval(input_dev, poll_interval); + } + + return 0; +} + +static const struct i2c_device_id axiom_i2c_id_table[] = { + { "ax54a" }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, axiom_i2c_id_table); + +static const struct of_device_id axiom_i2c_of_match[] = { + { .compatible = "touchnetix,ax54a", }, + { } +}; +MODULE_DEVICE_TABLE(of, axiom_i2c_of_match); + +static struct i2c_driver axiom_i2c_driver = { + .driver = { + .name = "axiom", + .of_match_table = axiom_i2c_of_match, + }, + .id_table = axiom_i2c_id_table, + .probe = axiom_i2c_probe, +}; +module_i2c_driver(axiom_i2c_driver); + +MODULE_AUTHOR("Bart Prescott "); +MODULE_AUTHOR("Pedro Torruella "); +MODULE_AUTHOR("Mark Satterthwaite "); +MODULE_AUTHOR("Hannah Rossiter "); +MODULE_AUTHOR("Kamel Bouhara "); +MODULE_DESCRIPTION("TouchNetix axiom touchscreen I2C bus driver"); +MODULE_LICENSE("GPL");