From patchwork Fri May 31 07:26:01 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Noah Wang X-Patchwork-Id: 800716 Received: from APC01-PSA-obe.outbound.protection.outlook.com (mail-psaapc01olkn2057.outbound.protection.outlook.com [40.92.52.57]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id AFAD725569; Fri, 31 May 2024 07:26:33 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=fail smtp.client-ip=40.92.52.57 ARC-Seal: i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1717140396; cv=fail; b=Rl/7HkFLvp2j70g/PJTttOh0D+tFcG5XFP9o23Wn7igydi2gFJAMGmyIR+5T2JIUVJJjJOl2VAg12db6uvcS5B852wtCnMQiSlWiPWjuAdyREqQJ2bPEjjLiMQEbCKCFoVJKIiRcntGMWxePVi3jTcx1Jr1fpJNYtPQZzHkQ5aE= ARC-Message-Signature: i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1717140396; c=relaxed/simple; bh=RnMuNJLUk8+QVjjxlC8cjG891LGBy7d9iWf/3cGma1w=; h=From:To:Cc:Subject:Date:Message-ID:Content-Type:MIME-Version; b=KTxftLmrbeoOb+xXMZG3MTO6ocNJ3dInEU2HBXRYoHliPKuR/Ons5/JM/uJ5QxEP12JDnM6688HZNzzUnZ8rx2VWpBNaK3fIo5UKL2KR5/9LEqtJxx8Hgmlmsc+h4PiNH2bIMj3yEPleP/8poU0CrFC68db/CanVPi33dG4m+1E= ARC-Authentication-Results: i=2; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=outlook.com; spf=pass smtp.mailfrom=outlook.com; dkim=pass (2048-bit key) header.d=outlook.com header.i=@outlook.com header.b=e7l3iujf; arc=fail smtp.client-ip=40.92.52.57 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=outlook.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=outlook.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=outlook.com header.i=@outlook.com header.b="e7l3iujf" ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=cnWb5BS86NANeK0Oo2y9/1b5ojzjdf65Ka9dtJYrzPK2WlVnp+89944/6NupaOUOPe5/P7kHsE7zHAzxEvEIxwb/K8U+PG76ua9ofip2lCzdivxXQ5DtAVquRL1VG225JBhZo2+iPwQmXPjAzd3DwJe6h3eTupebnfIsR4evU4IMjPlUMKT+625lSkVK/m5O0+tJUYosMnQ7HYnx0OBvwQSSqVO69LfmJzvmwzKdbnS8WJCK7rSMaG9tdHF0fmeqQfrmI02sCi+G6E7AU8wrgP1ZR3BXXXJPYtQjKm6nlIpVCKf1MR5kryZOO/CypGNQ64NEZqiYcUZm9u5LAIfQuw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=uipMKBHyGv2Q/SUiJWiJPUgu0wvwZTwAtmLYnZuMzOk=; b=Sm/8ePbzSL7myDEjSMbIoIArsqZReJcONWfVLv+pQUrUNfLD/LzDO0Hlz677q7qzi+YNqAZhYQQxHFRHRlFvcFI2RRmRPFtJu5OaSYgFL1cPsXinBCQmX4g7ThWUpbHoLRIViTwvGmVHELWpXexscN/odOttqEtIvqTBGUPBpKQlFwIV3QtOx9sR+ChfAffINEG0yHMFMX+9HnqzSkPiEqX4AaNiCJx9zKevL30/4Is2omPNIFYKtgpzOoJaXAu4jR1udfWc5JiYpfYX75b3gNZSi/TGhDeMT/KlSUYT+IN3YWkd5qYxnxouEYQFnSQGEet1NLnfM9uN52tw5ygwzQ== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=none; dmarc=none; dkim=none; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=outlook.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=uipMKBHyGv2Q/SUiJWiJPUgu0wvwZTwAtmLYnZuMzOk=; b=e7l3iujf0HBy7EVlIQquDJLKeHXUF7u/Lv3Q1V6hjW0QUcPq9zUIKvUUwsOYOfRoZA++l0wsCZMw1NlQzfPx4fB3Jli7rfdZSflR2WHL1U0bLGDgHK0yVvn59lTyQQLpU95442tsXcTU3TxCZ4UHU3hNrxxab9sJts6xPCgZWoJARamPizAyh9RaQm2dGwHMjqhk1N9HDwPNglU0VopKDKpWt3QeBkvUraZFGnQN//HbNNhWl2ka4Og/OxfYnKSAHZGtYlkPpJsaHNs7Vc1Tx0ELQartob3llv1ctkKtnbTzg82f36kYacwTcpisEjx9J8bPc+erV7HcEI/suGev+Q== Received: from SEYPR04MB6482.apcprd04.prod.outlook.com (2603:1096:101:be::7) by TYSPR04MB8003.apcprd04.prod.outlook.com (2603:1096:405:92::8) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.7611.30; Fri, 31 May 2024 07:26:27 +0000 Received: from SEYPR04MB6482.apcprd04.prod.outlook.com ([fe80::ca2b:8a48:a7ab:60e5]) by SEYPR04MB6482.apcprd04.prod.outlook.com ([fe80::ca2b:8a48:a7ab:60e5%5]) with mapi id 15.20.7611.025; Fri, 31 May 2024 07:26:27 +0000 From: Noah Wang To: robh@kernel.org, krzk+dt@kernel.org, linux@roeck-us.net, conor+dt@kernel.org, jdelvare@suse.com Cc: corbet@lwn.net, Delphine_CC_Chiu@Wiwynn.com, peteryin.openbmc@gmail.com, javier.carrasco.cruz@gmail.com, patrick.rudolph@9elements.com, luca.ceresoli@bootlin.com, chou.cosmo@gmail.com, bhelgaas@google.com, lukas@wunner.de, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org, linux-i2c@vger.kernel.org, Noah Wang Subject: [v3,1/2] hwmon: add MP2891 driver Date: Fri, 31 May 2024 15:26:01 +0800 Message-ID: X-Mailer: git-send-email 2.25.1 X-TMN: [QB5JNecdz82l9BYUIoFGw9XcI0WWmjmu] X-ClientProxiedBy: SGAP274CA0011.SGPP274.PROD.OUTLOOK.COM (2603:1096:4:b6::23) To SEYPR04MB6482.apcprd04.prod.outlook.com (2603:1096:101:be::7) X-Microsoft-Original-Message-ID: <20240531072602.4806-1-noahwang.wang@outlook.com> Precedence: bulk X-Mailing-List: linux-i2c@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-MS-Exchange-MessageSentRepresentingType: 1 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: SEYPR04MB6482:EE_|TYSPR04MB8003:EE_ X-MS-Office365-Filtering-Correlation-Id: a3eadd60-fea3-4404-3adf-08dc8142fb76 X-Microsoft-Antispam: BCL:0; ARA:14566002|461199019|3412199016|440099019|1602099003|1710799017; X-Microsoft-Antispam-Message-Info: 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 X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: outlook.com X-MS-Exchange-CrossTenant-Network-Message-Id: a3eadd60-fea3-4404-3adf-08dc8142fb76 X-MS-Exchange-CrossTenant-AuthSource: SEYPR04MB6482.apcprd04.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 31 May 2024 07:26:27.1785 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: 84df9e7f-e9f6-40af-b435-aaaaaaaaaaaa X-MS-Exchange-CrossTenant-RMS-PersistedConsumerOrg: 00000000-0000-0000-0000-000000000000 X-MS-Exchange-Transport-CrossTenantHeadersStamped: TYSPR04MB8003 Add support for MPS VR controller mp2891. This driver exposes telemetry and limit value readings and writings. Signed-off-by: Noah Wang --- v2 -> v3: 1. change PSC_VOLTAGE_IN, PSC_CURRENT_IN, PSC_TEMPERATURE, and PSC_POWER format from linear to direct 2. add limit register writings. 3. fix some coding style issues V1 -> V2: 1. add limit register readings 2. add status register readings 3. change PSC_CURRENT_OUT format from linear to direct 4. add more detailed explanation for special processing 5. remove useless code 6. move identify vout_scale, iout_scale function to identify() callback 7. update MP2891 datasheet Documentation/hwmon/index.rst | 1 + Documentation/hwmon/mp2891.rst | 179 ++++++++++ MAINTAINERS | 7 + drivers/hwmon/pmbus/Kconfig | 9 + drivers/hwmon/pmbus/Makefile | 1 + drivers/hwmon/pmbus/mp2891.c | 608 +++++++++++++++++++++++++++++++++ 6 files changed, 805 insertions(+) create mode 100644 Documentation/hwmon/mp2891.rst create mode 100644 drivers/hwmon/pmbus/mp2891.c diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 03d313af469a..88f70ef60f34 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -168,6 +168,7 @@ Hardware Monitoring Kernel Drivers mp2975 mp5023 mp5990 + mp2891 mpq8785 nct6683 nct6775 diff --git a/Documentation/hwmon/mp2891.rst b/Documentation/hwmon/mp2891.rst new file mode 100644 index 000000000000..a487d5ee8e1d --- /dev/null +++ b/Documentation/hwmon/mp2891.rst @@ -0,0 +1,179 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver mp2891 +==================== + +Supported chips: + + * MPS mp2891 + + Prefix: 'mp2891' + + * Datasheet + + Publicly available at the MPS website : https://www.monolithicpower.com/en/mp2891.html + +Author: + + Noah Wang + +Description +----------- + +This driver implements support for Monolithic Power Systems, Inc. (MPS) +MP2891 Multi-phase Digital VR Controller. + +Device compliant with: + +- PMBus rev 1.3 interface. + +Device supports direct and linear format for reading input voltage, +output voltage, input currect, output current, input power, output +power, and temperature. + +The driver exports the following attributes via the 'sysfs' files +for input voltage: + +**in1_input** + +**in1_label** + +**in1_crit** + +**in1_crit_alarm** + +**in1_lcrit** + +**in1_lcrit_alarm** + +**in1_min** + +**in1_min_alarm** + +The driver provides the following attributes for output voltage: + +**in2_input** + +**in2_label** + +**in2_crit** + +**in2_crit_alarm** + +**in2_lcrit** + +**in2_lcrit_alarm** + +**in2_min** + +**in2_min_alarm** + +**in3_input** + +**in3_label** + +**in3_crit** + +**in3_crit_alarm** + +**in3_lcrit** + +**in3_lcrit_alarm** + +**in3_min** + +**in3_min_alarm** + +The driver provides the following attributes for input current: + +**curr1_input** + +**curr1_label** + +**curr1_max** + +**curr1_max_alarm** + +**curr2_input** + +**curr2_label** + +**curr2_max** + +**curr2_max_alarm** + +The driver provides the following attributes for output current: + +**curr3_input** + +**curr3_label** + +**curr3_crit** + +**curr3_crit_alarm** + +**curr3_max** + +**curr3_max_alarm** + +**curr4_input** + +**curr4_label** + +**curr4_crit** + +**curr4_crit_alarm** + +**curr4_max** + +**curr4_max_alarm** + +The driver provides the following attributes for input power: + +**power1_input** + +**power1_label** + +**power1_max** + +**power1_alarm** + +**power2_input** + +**power2_label** + +**power2_max** + +**power2_alarm** + +The driver provides the following attributes for output power: + +**power3_input** + +**power3_label** + +**power4_input** + +**power4_label** + +The driver provides the following attributes for temperature: + +**temp1_input** + +**temp1_crit** + +**temp1_crit_alarm** + +**temp1_max** + +**temp1_max_alarm** + +**temp2_input** + +**temp2_crit** + +**temp2_crit_alarm** + +**temp2_max** + +**temp2_max_alarm** diff --git a/MAINTAINERS b/MAINTAINERS index e5dbbf1edafd..45a37918f1ec 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -22683,6 +22683,13 @@ S: Maintained F: Documentation/hwmon/tps546d24.rst F: drivers/hwmon/pmbus/tps546d24.c ++MPS MP2891 DRIVER ++M: Noah Wang ++L: linux-hwmon@vger.kernel.org ++S: Maintained ++F: Documentation/hwmon/mp2891.rst ++F: drivers/hwmon/pmbus/mp2891.c + TQ SYSTEMS BOARD & DRIVER SUPPORT L: linux@ew.tq-group.com S: Supported diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 08e82c457356..c0cc673a69ff 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -371,6 +371,15 @@ config SENSORS_MP5990 This driver can also be built as a module. If so, the module will be called mp5990. +config SENSORS_MP2891 + tristate "MPS MP2891" + help + If you say yes here you get hardware monitoring support for MPS + MP2891 Dual Loop Digital Multi-Phase Controller. + + This driver can also be built as a module. If so, the module will + be called mp2891. + config SENSORS_MPQ7932_REGULATOR bool "Regulator support for MPQ7932" depends on SENSORS_MPQ7932 && REGULATOR diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile index 2279b3327bbf..4f680bf06639 100644 --- a/drivers/hwmon/pmbus/Makefile +++ b/drivers/hwmon/pmbus/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_SENSORS_MP2888) += mp2888.o obj-$(CONFIG_SENSORS_MP2975) += mp2975.o obj-$(CONFIG_SENSORS_MP5023) += mp5023.o obj-$(CONFIG_SENSORS_MP5990) += mp5990.o +obj-$(CONFIG_SENSORS_MP2891) += mp2891.o obj-$(CONFIG_SENSORS_MPQ7932) += mpq7932.o obj-$(CONFIG_SENSORS_MPQ8785) += mpq8785.o obj-$(CONFIG_SENSORS_PLI1209BC) += pli1209bc.o diff --git a/drivers/hwmon/pmbus/mp2891.c b/drivers/hwmon/pmbus/mp2891.c new file mode 100644 index 000000000000..5ebde3e70646 --- /dev/null +++ b/drivers/hwmon/pmbus/mp2891.c @@ -0,0 +1,608 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Hardware monitoring driver for MPS Multi-phase Digital VR Controllers(MP2891) + */ + +#include +#include +#include +#include +#include +#include +#include "pmbus.h" + +/* + * Vender specific registers, the register MFR_SVI3_IOUT_PRT(0x65), + * MFR_VOUT_LOOP_CTRL(0xBD), READ_PIN_EST(0x94)and READ_IIN_EST(0x95) + * redefine the standard PMBUS register. The MFR_SVI3_IOUT_PRT(0x65) + * is used to identify the iout scale and the MFR_VOUT_LOOP_CTRL(0xBD) + * is used to identify the vout scale. The READ_PIN_EST(0x94) is used + * to read input power of per rail. The MP2891 does not have standard + * READ_IIN register(0x89), the iin telemetry can be obtained through + * the vendor redefined register READ_IIN_EST(0x95). + */ +#define MFR_VOUT_LOOP_CTRL 0xBD +#define READ_PIN_EST 0x94 +#define READ_IIN_EST 0x95 +#define MFR_SVI3_IOUT_PRT 0x65 + +#define MP2891_TEMP_LIMIT_OFFSET 40 +#define MP2891_PIN_LIMIT_UINT 2 +#define MP2891_IOUT_LIMIT_UINT 8 +#define MP2891_IOUT_SCALE_DIV 32 +#define MP2891_VOUT_SCALE_DIV 100 +#define MP2891_OVUV_DELTA_SCALE 50 +#define MP2891_OV_LIMIT_SCALE 20 +#define MP2891_UV_LIMIT_SCALE 5 + +#define MP2891_PAGE_NUM 2 + +#define MP2891_RAIL1_FUNC (PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | \ + PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP | \ + PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | \ + PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_VOUT | \ + PMBUS_HAVE_STATUS_IOUT | \ + PMBUS_HAVE_STATUS_INPUT | \ + PMBUS_HAVE_STATUS_TEMP) + +#define MP2891_RAIL2_FUNC (PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | \ + PMBUS_HAVE_TEMP | PMBUS_HAVE_POUT | \ + PMBUS_HAVE_PIN | PMBUS_HAVE_IIN | \ + PMBUS_HAVE_STATUS_VOUT | \ + PMBUS_HAVE_STATUS_IOUT | \ + PMBUS_HAVE_STATUS_INPUT | \ + PMBUS_HAVE_STATUS_TEMP) + +struct mp2891_data { + struct pmbus_driver_info info; + int vout_scale[MP2891_PAGE_NUM]; + int iout_scale[MP2891_PAGE_NUM]; +}; + +#define to_mp2891_data(x) container_of(x, struct mp2891_data, info) + +/* Converts a LINEAR11 value to DIRECT format */ +static u16 mp2891_reg2data_linear11(u16 word) +{ + s16 exponent; + s32 mantissa; + s64 val; + + exponent = ((s16)word) >> 11; + mantissa = ((s16)((word & 0x7ff) << 5)) >> 5; + val = mantissa; + + if (exponent >= 0) + val <<= exponent; + else + val >>= -exponent; + + return val; +} + +static int +mp2891_identify_vout_scale(struct i2c_client *client, struct pmbus_driver_info *info, + int page) +{ + struct mp2891_data *data = to_mp2891_data(info); + int ret; + + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_word_data(client, MFR_VOUT_LOOP_CTRL); + if (ret < 0) + return ret; + + /* + * The output voltage is equal to the READ_VOUT(0x8B) register value multiply + * by vout_scale. + * Obtain vout scale from the register MFR_VOUT_LOOP_CTRL, bits 15-14,bit 13. + * If MFR_VOUT_LOOP_CTRL[13] = 1, the vout scale is below: + * 2.5mV/LSB + * If MFR_VOUT_LOOP_CTRL[13] = 0, the vout scale is decided by + * MFR_VOUT_LOOP_CTRL[15:14]: + * 00b - 6.25mV/LSB, 01b - 5mV/LSB, 10b - 2mV/LSB, 11b - 1mV + */ + if (ret & GENMASK(13, 13)) { + data->vout_scale[page] = 250; + } else { + ret = FIELD_GET(GENMASK(15, 14), ret); + if (ret == 0) + data->vout_scale[page] = 625; + else if (ret == 1) + data->vout_scale[page] = 500; + else if (ret == 2) + data->vout_scale[page] = 200; + else + data->vout_scale[page] = 100; + } + + return 0; +} + +static int +mp2891_identify_iout_scale(struct i2c_client *client, struct pmbus_driver_info *info, + int page) +{ + struct mp2891_data *data = to_mp2891_data(info); + int ret; + + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_word_data(client, MFR_SVI3_IOUT_PRT); + if (ret < 0) + return ret; + + /* + * The output current is equal to the READ_IOUT(0x8C) register value + * multiply by iout_scale. + * Obtain iout_scale from the register MFR_SVI3_IOUT_PRT[2:0]. + * The value is selected as below: + * 000b - 1A/LSB, 001b - (1/32)A/LSB, 010b - (1/16)A/LSB, + * 011b - (1/8)A/LSB, 100b - (1/4)A/LSB, 101b - (1/2)A/LSB + * 110b - 1A/LSB, 111b - 2A/LSB + */ + switch (ret & GENMASK(2, 0)) { + case 0: + case 6: + data->iout_scale[page] = 32; + break; + case 1: + data->iout_scale[page] = 1; + break; + case 2: + data->iout_scale[page] = 2; + break; + case 3: + data->iout_scale[page] = 4; + break; + case 4: + data->iout_scale[page] = 8; + break; + case 5: + data->iout_scale[page] = 16; + break; + default: + data->iout_scale[page] = 64; + break; + } + + return 0; +} + +static int mp2891_identify(struct i2c_client *client, struct pmbus_driver_info *info) +{ + int ret; + + /* Identify vout scale for rail 1. */ + ret = mp2891_identify_vout_scale(client, info, 0); + if (ret < 0) + return ret; + + /* Identify vout scale for rail 2. */ + ret = mp2891_identify_vout_scale(client, info, 1); + if (ret < 0) + return ret; + + /* Identify iout scale for rail 1. */ + ret = mp2891_identify_iout_scale(client, info, 0); + if (ret < 0) + return ret; + + /* Identify iout scale for rail 2. */ + ret = mp2891_identify_iout_scale(client, info, 1); + if (ret < 0) + return ret; + + return ret; +} + +static int mp2891_read_byte_data(struct i2c_client *client, int page, int reg) +{ + int ret; + + switch (reg) { + case PMBUS_VOUT_MODE: + /* + * The MP2891 does not follow standard PMBus protocol completely, the + * PMBUS_VOUT_MODE(0x20) in MP2891 is reserved and 0x00 is always be + * returned when the register is read. But the calculation of vout in + * this driver is based on direct format. As a result, the format of + * vout is enforced to direct. + */ + ret = PB_VOUT_MODE_DIRECT; + break; + default: + ret = -ENODATA; + break; + } + + return ret; +} + +static int mp2891_read_word_data(struct i2c_client *client, int page, + int phase, int reg) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct mp2891_data *data = to_mp2891_data(info); + int ret; + + switch (reg) { + case PMBUS_READ_VIN: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = ret & GENMASK(9, 0); + break; + case PMBUS_READ_IIN: + /* + * The MP2891 does not have standard PMBUS_READ_IIN register(0x89), + * the iin telemetry can be obtained through the vender redefined + * register READ_IIN_EST(0x95). The MP2891 PMBUS_READ_IIN register + * is linear11 format, But the pout scale is set to 1A/Lsb(using + * r/m/b scale). As a result, the iin read from MP2891 should be + * calculated to A, then return the result to pmbus core. + */ + ret = pmbus_read_word_data(client, page, phase, READ_IIN_EST); + if (ret < 0) + return ret; + + ret = mp2891_reg2data_linear11(ret); + break; + case PMBUS_READ_PIN: + /* + * The MP2891 has standard PMBUS_READ_PIN register(0x97), but this + * is not used to read the input power of per rail. The input power + * of per rail is read through the vender redefined register + * READ_PIN_EST(0x94). The MP2891 PMBUS_READ_PIN register is linear11 + * format, But the pout scale is set to 1W/Lsb(using r/m/b scale). + * As a result, the pin read from MP2891 should be calculated to W, + * then return the result to pmbus core. + */ + ret = pmbus_read_word_data(client, page, phase, READ_PIN_EST); + if (ret < 0) + return ret; + + ret = mp2891_reg2data_linear11(ret); + break; + case PMBUS_READ_POUT: + /* + * The MP2891 PMBUS_READ_POUT register is linear11 format, and the + * exponent is not a constant value. But the pout scale is set to + * 1W/Lsb(using r/m/b scale). As a result, the pout read from MP2891 + * should be calculated to W, then return the result to pmbus core. + */ + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = mp2891_reg2data_linear11(ret); + break; + case PMBUS_READ_VOUT: + case PMBUS_VOUT_UV_WARN_LIMIT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST(ret * data->vout_scale[page], MP2891_VOUT_SCALE_DIV); + break; + case PMBUS_READ_IOUT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST((ret & GENMASK(10, 0)) * data->iout_scale[page], + MP2891_IOUT_SCALE_DIV); + break; + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_OT_WARN_LIMIT: + /* + * The scale of MP2891 PMBUS_OT_FAULT_LIMIT and PMBUS_OT_WARN_LIMIT + * is 1°C/LSB and they have 40°C offset. + */ + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = (ret & GENMASK(7, 0)) - MP2891_TEMP_LIMIT_OFFSET; + break; + case PMBUS_VIN_OV_FAULT_LIMIT: + /* + * The MP2891 PMBUS_VIN_OV_FAULT_LIMIT scale is 125mV/Lsb. + * but the vin scale is set to 31.25mV/Lsb(using r/m/b scale). + * As a result, the limit value should multiply by 4. + */ + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = (ret & GENMASK(7, 0)) * 4; + break; + case PMBUS_VOUT_UV_FAULT_LIMIT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + if (FIELD_GET(GENMASK(11, 8), ret)) + ret = FIELD_GET(GENMASK(7, 0), ret) * MP2891_UV_LIMIT_SCALE - + (FIELD_GET(GENMASK(11, 8), ret) + 1) * MP2891_OVUV_DELTA_SCALE; + else + ret = FIELD_GET(GENMASK(7, 0), ret) * MP2891_UV_LIMIT_SCALE; + + ret = ret < 0 ? 0 : ret; + break; + case PMBUS_VOUT_OV_FAULT_LIMIT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + if (FIELD_GET(GENMASK(11, 8), ret)) + ret = FIELD_GET(GENMASK(7, 0), ret) * MP2891_OV_LIMIT_SCALE + + (FIELD_GET(GENMASK(11, 8), ret) + 1) * MP2891_OVUV_DELTA_SCALE; + else + ret = FIELD_GET(GENMASK(7, 0), ret) * MP2891_OV_LIMIT_SCALE; + break; + case PMBUS_IOUT_OC_WARN_LIMIT: + case PMBUS_IOUT_OC_FAULT_LIMIT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST((ret & GENMASK(7, 0)) * data->iout_scale[page] * + MP2891_IOUT_LIMIT_UINT, MP2891_IOUT_SCALE_DIV); + break; + case PMBUS_IIN_OC_WARN_LIMIT: + /* + * The scale of PMBUS_IIN_OC_WARN_LIMIT is 0.5A/Lsb, but the iin scale + * is set to 1A/Lsb(using r/m/b scale), so the word data should divide + * by 2. + */ + ret = pmbus_read_word_data(client, 0, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST((ret & GENMASK(9, 0)), 2); + break; + case PMBUS_PIN_OP_WARN_LIMIT: + /* + * The scale of PMBUS_PIN_OP_WARN_LIMIT is 2W/Lsb, but the pin scale + * is set to 1W/Lsb(using r/m/b scale), so the word data should multiply + * by 2. + */ + ret = pmbus_read_word_data(client, 0, phase, reg); + if (ret < 0) + return ret; + + ret = (ret & GENMASK(9, 0)) * MP2891_PIN_LIMIT_UINT; + break; + case PMBUS_READ_TEMPERATURE_1: + case PMBUS_VIN_UV_FAULT_LIMIT: + case PMBUS_VIN_UV_WARN_LIMIT: + ret = -ENODATA; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int mp2891_write_word_data(struct i2c_client *client, int page, int reg, + u16 word) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct mp2891_data *data = to_mp2891_data(info); + int ret; + + switch (reg) { + case PMBUS_VOUT_UV_WARN_LIMIT: + ret = pmbus_write_word_data(client, page, reg, + DIV_ROUND_CLOSEST(word * MP2891_VOUT_SCALE_DIV, + data->vout_scale[page])); + break; + case PMBUS_VOUT_UV_FAULT_LIMIT: + /* + * The PMBUS_VOUT_UV_FAULT_LIMIT[7:0] is the limit value, and bit8-bit15 + * should not be changed. + */ + ret = pmbus_read_word_data(client, page, 0xff, reg); + if (ret < 0) + return ret; + + if (FIELD_GET(GENMASK(11, 8), ret)) + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(7, 0)) | + FIELD_PREP(GENMASK(7, 0), + DIV_ROUND_CLOSEST(word + + (FIELD_GET(GENMASK(11, 8), ret) + 1) * + MP2891_OVUV_DELTA_SCALE, + MP2891_UV_LIMIT_SCALE))); + else + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(7, 0)) | + FIELD_PREP(GENMASK(7, 0), + DIV_ROUND_CLOSEST(word, + MP2891_UV_LIMIT_SCALE))); + break; + case PMBUS_VOUT_OV_FAULT_LIMIT: + /* + * The PMBUS_VOUT_OV_FAULT_LIMIT[7:0] is the limit value, and bit8-bit15 + * should not be changed. + */ + ret = pmbus_read_word_data(client, page, 0xff, reg); + if (ret < 0) + return ret; + + if (FIELD_GET(GENMASK(11, 8), ret)) + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(7, 0)) | + FIELD_PREP(GENMASK(7, 0), + DIV_ROUND_CLOSEST(word - + (FIELD_GET(GENMASK(11, 8), ret) + 1) * + MP2891_OVUV_DELTA_SCALE, + MP2891_OV_LIMIT_SCALE))); + else + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(7, 0)) | + FIELD_PREP(GENMASK(7, 0), + DIV_ROUND_CLOSEST(word, + MP2891_OV_LIMIT_SCALE))); + break; + case PMBUS_VIN_OV_FAULT_LIMIT: + /* + * The PMBUS_VIN_OV_FAULT_LIMIT[7:0] is the limit value, and bit8-bit15 + * should not be changed. The scale of PMBUS_VIN_OV_FAULT_LIMIT is 125mV/Lsb, + * but the vin scale is set to 31.25mV/Lsb(using r/m/b scale), so the word data + * should divide by 4. + */ + ret = pmbus_read_word_data(client, page, 0xff, reg); + if (ret < 0) + return ret; + + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(7, 0)) | + FIELD_PREP(GENMASK(7, 0), + DIV_ROUND_CLOSEST(word, 4))); + break; + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_OT_WARN_LIMIT: + /* + * The scale of MP2891 PMBUS_OT_FAULT_LIMIT and PMBUS_OT_WARN_LIMIT + * have 40°C offset. The bit0-bit7 is the limit value, and bit8-bit15 + * should not be changed. + */ + ret = pmbus_read_word_data(client, page, 0xff, reg); + if (ret < 0) + return ret; + + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(7, 0)) | + FIELD_PREP(GENMASK(7, 0), word + MP2891_TEMP_LIMIT_OFFSET)); + break; + case PMBUS_IOUT_OC_WARN_LIMIT: + case PMBUS_IOUT_OC_FAULT_LIMIT: + ret = pmbus_write_word_data(client, page, reg, + DIV_ROUND_CLOSEST(word * MP2891_IOUT_SCALE_DIV, + MP2891_IOUT_LIMIT_UINT * + data->iout_scale[page])); + break; + case PMBUS_IIN_OC_WARN_LIMIT: + /* + * The scale of PMBUS_IIN_OC_WARN_LIMIT is 0.5A/Lsb, but the iin scale + * is set to 1A/Lsb(using r/m/b scale), so the word data should multiply + * by 2. + */ + ret = pmbus_write_word_data(client, page, reg, word * 2); + break; + case PMBUS_PIN_OP_WARN_LIMIT: + /* + * The scale of PMBUS_PIN_OP_WARN_LIMIT is 2W/Lsb, but the pin scale + * is set to 1W/Lsb(using r/m/b scale), so the word data should divide + * by 2. + */ + ret = pmbus_write_word_data(client, page, reg, + DIV_ROUND_CLOSEST(word, MP2891_PIN_LIMIT_UINT)); + break; + case PMBUS_VIN_UV_FAULT_LIMIT: + case PMBUS_VIN_UV_WARN_LIMIT: + ret = -ENODATA; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static struct pmbus_driver_info mp2891_info = { + .pages = MP2891_PAGE_NUM, + .format[PSC_VOLTAGE_IN] = direct, + .format[PSC_CURRENT_IN] = direct, + .format[PSC_CURRENT_OUT] = direct, + .format[PSC_TEMPERATURE] = direct, + .format[PSC_POWER] = direct, + .format[PSC_VOLTAGE_OUT] = direct, + + /* set vin scale 31.25mV/Lsb */ + .m[PSC_VOLTAGE_IN] = 32, + .R[PSC_VOLTAGE_IN] = 0, + .b[PSC_VOLTAGE_IN] = 0, + + /* set temp scale 1000m°C/Lsb */ + .m[PSC_TEMPERATURE] = 1, + .R[PSC_TEMPERATURE] = 0, + .b[PSC_TEMPERATURE] = 0, + + .m[PSC_CURRENT_IN] = 1, + .R[PSC_CURRENT_IN] = 0, + .b[PSC_CURRENT_IN] = 0, + + .m[PSC_CURRENT_OUT] = 1, + .R[PSC_CURRENT_OUT] = 0, + .b[PSC_CURRENT_OUT] = 0, + + .m[PSC_POWER] = 1, + .R[PSC_POWER] = 0, + .b[PSC_POWER] = 0, + + .m[PSC_VOLTAGE_OUT] = 1, + .R[PSC_VOLTAGE_OUT] = 3, + .b[PSC_VOLTAGE_OUT] = 0, + + .func[0] = MP2891_RAIL1_FUNC, + .func[1] = MP2891_RAIL2_FUNC, + .read_word_data = mp2891_read_word_data, + .write_word_data = mp2891_write_word_data, + .read_byte_data = mp2891_read_byte_data, + .identify = mp2891_identify, +}; + +static int mp2891_probe(struct i2c_client *client) +{ + struct pmbus_driver_info *info; + struct mp2891_data *data; + + data = devm_kzalloc(&client->dev, sizeof(struct mp2891_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + memcpy(&data->info, &mp2891_info, sizeof(*info)); + info = &data->info; + + return pmbus_do_probe(client, info); +} + +static const struct i2c_device_id mp2891_id[] = { + {"mp2891", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, mp2891_id); + +static const struct of_device_id __maybe_unused mp2891_of_match[] = { + {.compatible = "mps,mp2891"}, + {} +}; +MODULE_DEVICE_TABLE(of, mp2891_of_match); + +static struct i2c_driver mp2891_driver = { + .driver = { + .name = "mp2891", + .of_match_table = mp2891_of_match, + }, + .probe = mp2891_probe, + .id_table = mp2891_id, +}; + +module_i2c_driver(mp2891_driver); + +MODULE_AUTHOR("Noah Wang "); +MODULE_DESCRIPTION("PMBus driver for MPS MP2891"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(PMBUS); From patchwork Fri May 31 07:26:02 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Noah Wang X-Patchwork-Id: 801001 Received: from APC01-PSA-obe.outbound.protection.outlook.com (mail-psaapc01olkn2060.outbound.protection.outlook.com [40.92.52.60]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 3B02881734; Fri, 31 May 2024 07:26:39 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=fail smtp.client-ip=40.92.52.60 ARC-Seal: i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1717140401; cv=fail; b=lPpvATQPBYstpU3I9ghQBQ+K2QENSBSl6PvEKJs1A3eEEpB+Kp0l6QLLmyLMhzowF5rsJ0uzdedl9uSWJIn0txHcdEKk+AWGvDqM8QHhubIW/folGgUW6zCeMZgeK8g+xrOLccSONmSOB2Db4hFGG9DLaZp8EvM/PsvSh2R/AXo= ARC-Message-Signature: i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1717140401; c=relaxed/simple; bh=X1LkmhoJ/L6xgJDDmT6xyUVj8mGbwCxH2MOdKM3fMPE=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: Content-Type:MIME-Version; b=QW6nD2h9Yb5YKBz6iOgsYuE+FrLdnWlVVN1cyWSw7qzxjDjiyiT1mbZ3jfZsNTQHCZUEVBEbPhXCv/6gerH08+NFZ3/l8j+bjoZoR+QJQdinEUyuGuCk7ZRXU8kkZZa+W0+hMS0u5jNwD9czA969WL+wuD04JA/kLkUBPiKDMtw= ARC-Authentication-Results: i=2; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=outlook.com; spf=pass smtp.mailfrom=outlook.com; dkim=pass (2048-bit key) header.d=outlook.com header.i=@outlook.com header.b=HyAPpLHZ; arc=fail smtp.client-ip=40.92.52.60 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=outlook.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=outlook.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=outlook.com header.i=@outlook.com header.b="HyAPpLHZ" ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=nYd9B2lhKGJzF6ZrW5kevUTOkDoyw6uGwOnhLl5w1SBfWoZFiObz63iKs0UNo7ncwj2g/AXgST4L/25gwUXZh4aVjN2uINZyQbQptwxKPxlMAAgH4dnoALlhWorjEFef/zc5JVmlZ6T8YvZr5i9tC9Np69QS+R9CgoG1jFPQRS/XqgHnnr/LfEO2DGJywG4cLYO59f8VTLjx9w3afCC0duDkXzo5etXKhBKYNz9LuhdWsul4Sqz2jQ+BXOKC/FK4y6owac3caPmM1vb2XTCK00P5uvyA2QgqCnhxG3ZH80EfiSp6akQbyrKbxmforQJSwa6P7ofYbByCr5BiEavHfA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=7QRZxqP0jYxJa22bM+2iZ1cae2M3APWYUr+l0t+1kyo=; b=PhyTu4NAG/hQb7MI09FXFpbpCwOgsdFg+fV8HoKtmc62joxsjWl97XxvSyFusGyAo+Wn6OZEQKK00M/uh+SiPBOM9d7/76k3lEbQFcffbbXSRiCRVxJMJ3tldQ6r9Q+DQfWK1n0yyd285tH+zDztG2+T29ZfLmTbKB7dnsKJS4hU8z24dRRvd02MEJfgfNaX51r/RPvbdIJMUkgV3E0tFikxNgKhhduFvyP5yJ/4bX/elTdrVG21DHHM6334GES62Xb5bUGFEDD/SgzBv8HPZrxVxfDKyEGc+qtDavJAPdiUK0PAAjUgDKjdhppxlF26pQFzFqwKDCS/rMFXyO1xfA== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=none; dmarc=none; dkim=none; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=outlook.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=7QRZxqP0jYxJa22bM+2iZ1cae2M3APWYUr+l0t+1kyo=; b=HyAPpLHZ0HqkHpRqgsjtJIsqFt8kSofFuUj0CSradH/rYndQCVxlf8xlUHgkur/0GpnFel61ETR9OCp9ws371ysnPjqRBSU12FJjDXTAkWUgSHmt9QvkD2mQKJi0Mbe6u9Bk015M8zZrYHz/kCWSWEDE8qef4cPHNYcJUu3O9XbzR4RR3yVxLst4IkOe7QHN7nZbj1yH8Iexl3iHzvGAnf+/Z4OAxIcY3ZOgVRdWELHl4nSLsZqFkyS+Xo+4HECLrrGpWIjXjCQ+J54Y85PeMYTEJDCiFlvhCY77FKex1JsuxFZVBNPpax4AR2cInqF7zgVi97lM1sbXrSBXBIV7kQ== Received: from SEYPR04MB6482.apcprd04.prod.outlook.com (2603:1096:101:be::7) by TYSPR04MB8003.apcprd04.prod.outlook.com (2603:1096:405:92::8) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.7611.30; Fri, 31 May 2024 07:26:34 +0000 Received: from SEYPR04MB6482.apcprd04.prod.outlook.com ([fe80::ca2b:8a48:a7ab:60e5]) by SEYPR04MB6482.apcprd04.prod.outlook.com ([fe80::ca2b:8a48:a7ab:60e5%5]) with mapi id 15.20.7611.025; Fri, 31 May 2024 07:26:34 +0000 From: Noah Wang To: robh@kernel.org, krzk+dt@kernel.org, linux@roeck-us.net, conor+dt@kernel.org, jdelvare@suse.com Cc: corbet@lwn.net, Delphine_CC_Chiu@Wiwynn.com, peteryin.openbmc@gmail.com, javier.carrasco.cruz@gmail.com, patrick.rudolph@9elements.com, luca.ceresoli@bootlin.com, chou.cosmo@gmail.com, bhelgaas@google.com, lukas@wunner.de, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org, linux-i2c@vger.kernel.org, Noah Wang Subject: [v3,2/2] dt-bindings: hwmon: Add mps mp2891 Date: Fri, 31 May 2024 15:26:02 +0800 Message-ID: X-Mailer: git-send-email 2.25.1 In-Reply-To: <20240531072602.4806-1-noahwang.wang@outlook.com> References: <20240531072602.4806-1-noahwang.wang@outlook.com> X-TMN: [2bi1LopZLyHsqoP+C5j9UHF5cTkQpmMZ] X-ClientProxiedBy: SGAP274CA0011.SGPP274.PROD.OUTLOOK.COM (2603:1096:4:b6::23) To SEYPR04MB6482.apcprd04.prod.outlook.com (2603:1096:101:be::7) X-Microsoft-Original-Message-ID: <20240531072602.4806-2-noahwang.wang@outlook.com> Precedence: bulk X-Mailing-List: linux-i2c@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-MS-Exchange-MessageSentRepresentingType: 1 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: SEYPR04MB6482:EE_|TYSPR04MB8003:EE_ X-MS-Office365-Filtering-Correlation-Id: c3b26de9-2ee8-4aa0-34fc-08dc8142fffd X-Microsoft-Antispam: BCL:0; ARA:14566002|461199019|3412199016|440099019|1710799017; X-Microsoft-Antispam-Message-Info: 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 X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: outlook.com X-MS-Exchange-CrossTenant-Network-Message-Id: c3b26de9-2ee8-4aa0-34fc-08dc8142fffd X-MS-Exchange-CrossTenant-AuthSource: SEYPR04MB6482.apcprd04.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 31 May 2024 07:26:34.7474 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: 84df9e7f-e9f6-40af-b435-aaaaaaaaaaaa X-MS-Exchange-CrossTenant-RMS-PersistedConsumerOrg: 00000000-0000-0000-0000-000000000000 X-MS-Exchange-Transport-CrossTenantHeadersStamped: TYSPR04MB8003 Add support for mps mp2891 controller Signed-off-by: Noah Wang --- v2 -> v3: move mp2891 dt-bindings to trivial devices v1 -> v2: add mp2891 dt-bindings Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 025d50454f88..dabbc4cd089e 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -290,6 +290,8 @@ properties: - mps,mp2973 # Monolithic Power Systems Inc. multi-phase controller mp2975 - mps,mp2975 + # Monolithic Power Systems Inc. multi-phase controller mp2891 + - mps,mp2891 # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990 - mps,mp5990 # Monolithic Power Systems Inc. synchronous step-down converter mpq8785