From patchwork Wed Jun 26 09:46:00 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Noah Wang X-Patchwork-Id: 807605 Received: from APC01-TYZ-obe.outbound.protection.outlook.com (mail-tyzapc01olkn2092.outbound.protection.outlook.com [40.92.107.92]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 6F5AA149C52; Wed, 26 Jun 2024 09:46:27 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=fail smtp.client-ip=40.92.107.92 ARC-Seal: i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1719395189; cv=fail; b=HCQZPs7ld6ijOGsosMO9Y573wUd0giLcZJ7aSuHsxyYe76ICSK2RX/yjLDbOl79dUv/Bpm4TCnwGrSVlYNPr4CQ0H/VxwK6HbjnjXjngAuQDJZ4yqXCMQIs2G0iTfbsXpHxSWaoxaqTuIWV4Ja6ZUeZBhYLAzR5bl2zquDOyEAI= ARC-Message-Signature: i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1719395189; c=relaxed/simple; bh=rgC22mU4WpI+vsvnrkjmVrU+AolHXTlpyzYGY3xDOdk=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: Content-Type:MIME-Version; b=kKeo9lnfX5lc8nhMd9/Ub8I34KVyTx0adTL7A29yQDCUuRWpScP/d1l690sw7an7dHRvniVDxszDx6f96q0ROuHtuQMRE2ZZ67YR7nyNb/8NuVpIhTtsdA2dsYzX+Zf5412qNNvwUxYXzy3KcqsEDKe5KwDZ5FQMI25LcIrBP0s= ARC-Authentication-Results: i=2; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=outlook.com; spf=pass smtp.mailfrom=outlook.com; dkim=pass (2048-bit key) header.d=outlook.com header.i=@outlook.com header.b=ruj6g2Sd; arc=fail smtp.client-ip=40.92.107.92 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=outlook.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=outlook.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=outlook.com header.i=@outlook.com header.b="ruj6g2Sd" ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=Zu+An7Jio31ZrUbLh3IFJjaDEZpXiaM5Ws//eXqXcdf1hi3zJiQZxgrChYWwfQOCfNOEqlgIil1j0gdelkIKP2l0xPjM5tiQT6kXVHjValJmvlzc3UPOHlyfV8lsTFXt+gn8IwxPlGyjpipdH4ZLZRhgRNowltXIl3+KtLEA0UK3dh39gfwFus+BIU0vkTafao3sSsUX13HqOP4jUQT549jggECu/D82750UQo+V/ZK1Obz9DloeH6nfSbihPPM+TH7KA5frz0BjZShn0kL4440WZU3+6PAvUogDu2zuZI+5QqXdRn8KpKp1zZnbStdoT9Ey242uiPHSTCgZVdG31w== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=BNxlTTFtbMu++uEV7DguxSTE8gJD++FSui00LFxvrM4=; b=Ahxuyxr1RzhuJ6J+Ic9dsy+T0e2oQgOvo6Va2fwSRVvEdV2o1ZhH6G/5kze3h9oqoRbBdDEHIl1SCHMzFQsUd7lnjmxMQ1PGKiYqr+vTjTi0fBPUdElL0erdvRDc+EQpw+2ChF3Ab3qPgwV1Ta5dtqbKUwMfBRaONkWR5//qsxbiu7vOkWe7FQK2antSsYlyROWFnhBAVHC0I2amruU/SUhSg9SBm5FJJvJiMRApzfLVHBPkxa/YY3by6M5P69qnFmOPFG+yaNxVtoNZeWXuFzk+U0NfX0G+judjGw4IYDGfAiugL5TuHINFMZwASa1tUid1S58whmO1VdTlY6CHuQ== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=none; dmarc=none; dkim=none; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=outlook.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=BNxlTTFtbMu++uEV7DguxSTE8gJD++FSui00LFxvrM4=; b=ruj6g2SdCRHsROvWuIkWH3fdiqmKPaC3a4hfehd9hJSmGkrR9hvs0hPEfGLzhPwQ03VxscHbvb2sZD9gY1QN5KLJLUy6p2otiN2RET6fc3GsiLeEQ/V3FKebOKfac9tyZQijxFY23B3Ltp+byBXnuyiJ3fFzXNIYjK8MeefMPMkzn1GTTCkrm+3A4+K4JSL+6uveVsza3v03ce4rZ8Zt5u+tmYCU8X9OPX9qq8NYRFeeSQeul3Juu8V4c9CNwekQ70C+fXtKsXBuc0wTwj7YqqMIeYCNDYDTo918TYKgjF76L1+Q9C6XYdbg4fmmnCWJv+TfT992YSCHiNIO/3sK6Q== Received: from SEYPR04MB6482.apcprd04.prod.outlook.com (2603:1096:101:be::7) by KL1PR04MB6877.apcprd04.prod.outlook.com (2603:1096:820:cb::15) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.7698.25; Wed, 26 Jun 2024 09:46:20 +0000 Received: from SEYPR04MB6482.apcprd04.prod.outlook.com ([fe80::ca2b:8a48:a7ab:60e5]) by SEYPR04MB6482.apcprd04.prod.outlook.com ([fe80::ca2b:8a48:a7ab:60e5%5]) with mapi id 15.20.7719.014; Wed, 26 Jun 2024 09:46:20 +0000 From: Noah Wang To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, jdelvare@suse.com, linux@roeck-us.net Cc: corbet@lwn.net, Delphine_CC_Chiu@Wiwynn.com, peteryin.openbmc@gmail.com, javier.carrasco.cruz@gmail.com, patrick.rudolph@9elements.com, bhelgaas@google.com, lukas@wunner.de, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org, linux-i2c@vger.kernel.org, Noah Wang Subject: [PATCH v5 1/2] dt-bindings: hwmon: Add MPS mp2891 Date: Wed, 26 Jun 2024 17:46:00 +0800 Message-ID: X-Mailer: git-send-email 2.25.1 In-Reply-To: References: X-TMN: [cfuiPipfnhf43b78oMvvisFN6Z30J5aw] X-ClientProxiedBy: SI2PR01CA0005.apcprd01.prod.exchangelabs.com (2603:1096:4:191::23) To SEYPR04MB6482.apcprd04.prod.outlook.com (2603:1096:101:be::7) X-Microsoft-Original-Message-ID: <20240626094601.52298-1-noahwang.wang@outlook.com> Precedence: bulk X-Mailing-List: linux-i2c@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-MS-Exchange-MessageSentRepresentingType: 1 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: SEYPR04MB6482:EE_|KL1PR04MB6877:EE_ X-MS-Office365-Filtering-Correlation-Id: 25fe060a-7420-4d6c-c5e6-08dc95c4d52c X-Microsoft-Antispam: BCL:0; ARA:14566002|461199026|3412199023|440099026|1710799026; X-Microsoft-Antispam-Message-Info: 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 X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: outlook.com X-MS-Exchange-CrossTenant-Network-Message-Id: 25fe060a-7420-4d6c-c5e6-08dc95c4d52c X-MS-Exchange-CrossTenant-AuthSource: SEYPR04MB6482.apcprd04.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 26 Jun 2024 09:46:20.4507 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: 84df9e7f-e9f6-40af-b435-aaaaaaaaaaaa X-MS-Exchange-CrossTenant-RMS-PersistedConsumerOrg: 00000000-0000-0000-0000-000000000000 X-MS-Exchange-Transport-CrossTenantHeadersStamped: KL1PR04MB6877 Add support for MPS mp2891 controller Reviewed-by: Rob Herring (Arm) Signed-off-by: Noah Wang --- v4 -> v5: add Rob's Acked-by v3 -> v4: add mp2891 in alpha order v2 -> v3: move mp2891 dt-bindings to trivial devices v1 -> v2: add mp2891 dt-bindings Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 0a419453d183..191d4c3e0ad6 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -286,6 +286,8 @@ properties: - mps,mp2857 # Monolithic Power Systems Inc. multi-phase controller mp2888 - mps,mp2888 + # Monolithic Power Systems Inc. multi-phase controller mp2891 + - mps,mp2891 # Monolithic Power Systems Inc. multi-phase controller mp2971 - mps,mp2971 # Monolithic Power Systems Inc. multi-phase controller mp2973 From patchwork Wed Jun 26 09:46:01 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Noah Wang X-Patchwork-Id: 807977 Received: from APC01-SG2-obe.outbound.protection.outlook.com (mail-sgaapc01olkn2021.outbound.protection.outlook.com [40.92.53.21]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id E76BF149C52; Wed, 26 Jun 2024 09:46:37 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=fail smtp.client-ip=40.92.53.21 ARC-Seal: i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1719395200; cv=fail; b=Ekoe6pzAw5VzGmjKpM7dNPDu5CZCpZ/tb2XtzFnXcOzJPpAR5iJXCllji6ruISpF71aheA/Osj+2S3PdDkH/ctvStKyhtStCZNQhql4jecobWK4IBm8A4D+4mtwv9nn+4Cnqw+1ux60zvAfXFzADbtOpx/NgWTBjjmyv8ICmQH4= ARC-Message-Signature: i=2; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1719395200; c=relaxed/simple; bh=WKBKxZvU2MK8Soj8F66XkqsJwfIx3yfyp0e8w21OZI4=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: Content-Type:MIME-Version; b=YAhRQ1qgX0EwxoivYq3bnV//s2v2wb5VhoYdqkV8etitdNcbsZVYX1ivJ/cVZV5rK2/duyeEh9/xRhTwkmq1nAdSVILFlsGiMEHSMRBYGJcbauGcc/WyNjgu46//2KJY5ukMm6f1U0TsitrymN2TkDMXitnMchs8Yv4E79TV4SE= ARC-Authentication-Results: i=2; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=outlook.com; spf=pass smtp.mailfrom=outlook.com; dkim=pass (2048-bit key) header.d=outlook.com header.i=@outlook.com header.b=fCOwwe70; arc=fail smtp.client-ip=40.92.53.21 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=outlook.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=outlook.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=outlook.com header.i=@outlook.com header.b="fCOwwe70" ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=B4u60ZUrXMKWrw+0IZggSyyLCML98NdY6mJXTzt61Iou2+kZytQcWcxeOw/jFGKBEgyVFvXyiWxhHMdGYayfAPxTJmkysMTgA0jRCmdr5Mm8/4VQPvhwS50Vr7x/yzjU6Xt35cYxPXKCHomyBpYKdP026+Hl+sog3zvTuNE7iqKno10onpuyVxAEzmbgmiP27oddAWBVnCrB8gSlYlLL0r1EBrZz3+w8eJkla3xoxEcd/cWG4RMrYJtBwCDQYBHtOHRgi9cxjv9+1KhXAJGbGJoLExIPrSOBixZBZhUM1rReh6ZXgt1HQQ8DajJSsi37iYQQswLGxMTIy9hCd9tAXQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=6G143DeHcdyziksGhE1SSodzERSN5oypylaetk5w0l4=; b=Kzv+9pXJIzdq83ubCDYoI4OwCaK2dSAwu/U+qItNJOs7qSw83CiOHMHmWERuNG+HjZ1e/YsWgt0ntHysb9btvh0HFnzdSiLvghyQ3KZKtxxsV7Uzm54rfKcnM1Qo7o0lJ11Z+m7RHVKfpVwdqA90bhZ0uOkS3g0CFgf5JrrT02BdjNxrGDqtYxWizY2O2tcaoWS7BgqXYGmQhJJecmx7tVk95lPkM+trLLIQVoP5+a7ZDA6AIRxPt277NlKbCn/CeI2zHOiW0on2JLsyFWgTzTho1GClRN2MseqF+/Uch2uXfEHlqratjAjXMAunWmUGM0J7dCq/yim+pbXx8YhTkQ== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=none; dmarc=none; dkim=none; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=outlook.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=6G143DeHcdyziksGhE1SSodzERSN5oypylaetk5w0l4=; b=fCOwwe70Q9gFDKz9ril+J1rs2hLqRHGsZ8ChaLRHjEtavnv/IOKjjg6RczDH+bxtuMdxy+7a2IKSpoHCtEhTdfjRXJfkclZ/GD5OZ/a9fYYsQPCQE//ImiXvnQl4TeNYeIyN13KSsZTYVJjF5aQOLPLMgMM+XgTg27ZYHjiQgdUqUpBfJAThr3ahs8AExt9jabB7gGoskM3hOgPrNOolRIQknoybD8n3SBmdAyrxz66bxEh9BUbei2Fd66dgILPsJXZkWWMVS3rEROPopKbWwxYThqW0MOu3VBBu75H/1MvngTgYUHqPqSYGtVpJYjuelquxkLu4fEQlSY1tTtBJeg== Received: from SEYPR04MB6482.apcprd04.prod.outlook.com (2603:1096:101:be::7) by KL1PR04MB6877.apcprd04.prod.outlook.com (2603:1096:820:cb::15) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.7698.25; Wed, 26 Jun 2024 09:46:30 +0000 Received: from SEYPR04MB6482.apcprd04.prod.outlook.com ([fe80::ca2b:8a48:a7ab:60e5]) by SEYPR04MB6482.apcprd04.prod.outlook.com ([fe80::ca2b:8a48:a7ab:60e5%5]) with mapi id 15.20.7719.014; Wed, 26 Jun 2024 09:46:30 +0000 From: Noah Wang To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, jdelvare@suse.com, linux@roeck-us.net Cc: corbet@lwn.net, Delphine_CC_Chiu@Wiwynn.com, peteryin.openbmc@gmail.com, javier.carrasco.cruz@gmail.com, patrick.rudolph@9elements.com, bhelgaas@google.com, lukas@wunner.de, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org, linux-i2c@vger.kernel.org, Noah Wang Subject: [PATCH v5 2/2] hwmon: add MP2891 driver Date: Wed, 26 Jun 2024 17:46:01 +0800 Message-ID: X-Mailer: git-send-email 2.25.1 In-Reply-To: <20240626094601.52298-1-noahwang.wang@outlook.com> References: <20240626094601.52298-1-noahwang.wang@outlook.com> X-TMN: [Nbe8HM/6uT10fdkHywp3cYFG81YzsQoD] X-ClientProxiedBy: SI2PR01CA0005.apcprd01.prod.exchangelabs.com (2603:1096:4:191::23) To SEYPR04MB6482.apcprd04.prod.outlook.com (2603:1096:101:be::7) X-Microsoft-Original-Message-ID: <20240626094601.52298-2-noahwang.wang@outlook.com> Precedence: bulk X-Mailing-List: linux-i2c@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-MS-Exchange-MessageSentRepresentingType: 1 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: SEYPR04MB6482:EE_|KL1PR04MB6877:EE_ X-MS-Office365-Filtering-Correlation-Id: 4f975899-d062-413f-a277-08dc95c4dae9 X-Microsoft-Antispam: BCL:0; ARA:14566002|461199026|1602099010|4302099011|3412199023|440099026|1710799026; X-Microsoft-Antispam-Message-Info: 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 X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: outlook.com X-MS-Exchange-CrossTenant-Network-Message-Id: 4f975899-d062-413f-a277-08dc95c4dae9 X-MS-Exchange-CrossTenant-AuthSource: SEYPR04MB6482.apcprd04.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 26 Jun 2024 09:46:30.1652 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: 84df9e7f-e9f6-40af-b435-aaaaaaaaaaaa X-MS-Exchange-CrossTenant-RMS-PersistedConsumerOrg: 00000000-0000-0000-0000-000000000000 X-MS-Exchange-Transport-CrossTenantHeadersStamped: KL1PR04MB6877 Add support for MPS VR controller mp2891. This driver exposes telemetry and limit value readings and writtings. Signed-off-by: Noah Wang --- v4 -> v5: 1. remove useless code in mp2891_identify() v3 -> v4: 1. add mp2891 to Makefile, Kconfig and MAINTAINERS file in alpha order 2. sort include files in alpha order 3. fix some issue in annotation 4. remove info variable in mp2891_probe() 5. add const attribute to mp2891_info variable v2 -> v3: 1. change PSC_VOLTAGE_IN, PSC_CURRENT_IN, PSC_TEMPERATURE, and PSC_POWER format from linear to direct 2. add limit register writtings. 3. fix some coding style issues V1 -> V2: 1. add limit register readings 2. add status register readings 3. change PSC_CURRENT_OUT format from linear to direct 4. add more detailed explanation for special processing 5. remove useless code 6. move identify vout_scale, iout_scale function to identify() callback 7. update MP2891 datasheet Documentation/hwmon/index.rst | 1 + Documentation/hwmon/mp2891.rst | 179 ++++++++++ MAINTAINERS | 7 + drivers/hwmon/pmbus/Kconfig | 9 + drivers/hwmon/pmbus/Makefile | 1 + drivers/hwmon/pmbus/mp2891.c | 600 +++++++++++++++++++++++++++++++++ 6 files changed, 797 insertions(+) create mode 100644 Documentation/hwmon/mp2891.rst create mode 100644 drivers/hwmon/pmbus/mp2891.c diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 03d313af469a..e8413ca7dd96 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -165,6 +165,7 @@ Hardware Monitoring Kernel Drivers mlxreg-fan mp2856 mp2888 + mp2891 mp2975 mp5023 mp5990 diff --git a/Documentation/hwmon/mp2891.rst b/Documentation/hwmon/mp2891.rst new file mode 100644 index 000000000000..55944d1b5457 --- /dev/null +++ b/Documentation/hwmon/mp2891.rst @@ -0,0 +1,179 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver mp2891 +==================== + +Supported chips: + + * MPS mp2891 + + Prefix: 'mp2891' + + * Datasheet + + Publicly available at the MPS website : https://www.monolithicpower.com/en/mp2891.html + +Author: + + Noah Wang + +Description +----------- + +This driver implements support for Monolithic Power Systems, Inc. (MPS) +MP2891 Multi-phase Digital VR Controller. + +Device compliant with: + +- PMBus rev 1.3 interface. + +Device supports direct and linear format for reading input voltage, +output voltage, input current, output current, input power, output +power, and temperature. + +The driver exports the following attributes via the 'sysfs' files +for input voltage: + +**in1_input** + +**in1_label** + +**in1_crit** + +**in1_crit_alarm** + +**in1_lcrit** + +**in1_lcrit_alarm** + +**in1_min** + +**in1_min_alarm** + +The driver provides the following attributes for output voltage: + +**in2_input** + +**in2_label** + +**in2_crit** + +**in2_crit_alarm** + +**in2_lcrit** + +**in2_lcrit_alarm** + +**in2_min** + +**in2_min_alarm** + +**in3_input** + +**in3_label** + +**in3_crit** + +**in3_crit_alarm** + +**in3_lcrit** + +**in3_lcrit_alarm** + +**in3_min** + +**in3_min_alarm** + +The driver provides the following attributes for input current: + +**curr1_input** + +**curr1_label** + +**curr1_max** + +**curr1_max_alarm** + +**curr2_input** + +**curr2_label** + +**curr2_max** + +**curr2_max_alarm** + +The driver provides the following attributes for output current: + +**curr3_input** + +**curr3_label** + +**curr3_crit** + +**curr3_crit_alarm** + +**curr3_max** + +**curr3_max_alarm** + +**curr4_input** + +**curr4_label** + +**curr4_crit** + +**curr4_crit_alarm** + +**curr4_max** + +**curr4_max_alarm** + +The driver provides the following attributes for input power: + +**power1_input** + +**power1_label** + +**power1_max** + +**power1_alarm** + +**power2_input** + +**power2_label** + +**power2_max** + +**power2_alarm** + +The driver provides the following attributes for output power: + +**power3_input** + +**power3_label** + +**power4_input** + +**power4_label** + +The driver provides the following attributes for temperature: + +**temp1_input** + +**temp1_crit** + +**temp1_crit_alarm** + +**temp1_max** + +**temp1_max_alarm** + +**temp2_input** + +**temp2_crit** + +**temp2_crit_alarm** + +**temp2_max** + +**temp2_max_alarm** diff --git a/MAINTAINERS b/MAINTAINERS index 2ca8f35dfe03..8aaf4108d24e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15255,6 +15255,13 @@ S: Maintained F: Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml F: drivers/video/backlight/mp3309c.c +MPS MP2891 DRIVER +M: Noah Wang +L: linux-hwmon@vger.kernel.org +S: Maintained +F: Documentation/hwmon/mp2891.rst +F: drivers/hwmon/pmbus/mp2891.c + MR800 AVERMEDIA USB FM RADIO DRIVER M: Alexey Klimov L: linux-media@vger.kernel.org diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 08e82c457356..66a3bad95ab3 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -337,6 +337,15 @@ config SENSORS_MP2888 This driver can also be built as a module. If so, the module will be called mp2888. +config SENSORS_MP2891 + tristate "MPS MP2891" + help + If you say yes here you get hardware monitoring support for MPS + MP2891 Dual Loop Digital Multi-Phase Controller. + + This driver can also be built as a module. If so, the module will + be called mp2891. + config SENSORS_MP2975 tristate "MPS MP2975" help diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile index 2279b3327bbf..84e2ff71f7d6 100644 --- a/drivers/hwmon/pmbus/Makefile +++ b/drivers/hwmon/pmbus/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_SENSORS_MAX34440) += max34440.o obj-$(CONFIG_SENSORS_MAX8688) += max8688.o obj-$(CONFIG_SENSORS_MP2856) += mp2856.o obj-$(CONFIG_SENSORS_MP2888) += mp2888.o +obj-$(CONFIG_SENSORS_MP2891) += mp2891.o obj-$(CONFIG_SENSORS_MP2975) += mp2975.o obj-$(CONFIG_SENSORS_MP5023) += mp5023.o obj-$(CONFIG_SENSORS_MP5990) += mp5990.o diff --git a/drivers/hwmon/pmbus/mp2891.c b/drivers/hwmon/pmbus/mp2891.c new file mode 100644 index 000000000000..bb28b15a9103 --- /dev/null +++ b/drivers/hwmon/pmbus/mp2891.c @@ -0,0 +1,600 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Hardware monitoring driver for MPS Multi-phase Digital VR Controllers(MP2891) + */ + +#include +#include +#include +#include +#include "pmbus.h" + +/* + * Vender specific registers, the register MFR_SVI3_IOUT_PRT(0x65), + * MFR_VOUT_LOOP_CTRL(0xBD), READ_PIN_EST(0x94)and READ_IIN_EST(0x95) + * redefine the standard PMBUS register. The MFR_SVI3_IOUT_PRT(0x65) + * is used to identify the iout scale and the MFR_VOUT_LOOP_CTRL(0xBD) + * is used to identify the vout scale. The READ_PIN_EST(0x94) is used + * to read input power per rail. The MP2891 does not have standard + * READ_IIN register(0x89), the iin telemetry can be obtained through + * the vendor redefined register READ_IIN_EST(0x95). + */ +#define MFR_VOUT_LOOP_CTRL 0xBD +#define READ_PIN_EST 0x94 +#define READ_IIN_EST 0x95 +#define MFR_SVI3_IOUT_PRT 0x65 + +#define MP2891_TEMP_LIMIT_OFFSET 40 +#define MP2891_PIN_LIMIT_UINT 2 +#define MP2891_IOUT_LIMIT_UINT 8 +#define MP2891_IOUT_SCALE_DIV 32 +#define MP2891_VOUT_SCALE_DIV 100 +#define MP2891_OVUV_DELTA_SCALE 50 +#define MP2891_OV_LIMIT_SCALE 20 +#define MP2891_UV_LIMIT_SCALE 5 + +#define MP2891_PAGE_NUM 2 + +#define MP2891_RAIL1_FUNC (PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | \ + PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP | \ + PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | \ + PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_VOUT | \ + PMBUS_HAVE_STATUS_IOUT | \ + PMBUS_HAVE_STATUS_INPUT | \ + PMBUS_HAVE_STATUS_TEMP) + +#define MP2891_RAIL2_FUNC (PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | \ + PMBUS_HAVE_TEMP | PMBUS_HAVE_POUT | \ + PMBUS_HAVE_PIN | PMBUS_HAVE_IIN | \ + PMBUS_HAVE_STATUS_VOUT | \ + PMBUS_HAVE_STATUS_IOUT | \ + PMBUS_HAVE_STATUS_INPUT | \ + PMBUS_HAVE_STATUS_TEMP) + +struct mp2891_data { + struct pmbus_driver_info info; + int vout_scale[MP2891_PAGE_NUM]; + int iout_scale[MP2891_PAGE_NUM]; +}; + +#define to_mp2891_data(x) container_of(x, struct mp2891_data, info) + +/* Converts a LINEAR11 value to DIRECT format */ +static u16 mp2891_reg2data_linear11(u16 word) +{ + s16 exponent; + s32 mantissa; + s64 val; + + exponent = ((s16)word) >> 11; + mantissa = ((s16)((word & 0x7ff) << 5)) >> 5; + val = mantissa; + + if (exponent >= 0) + val <<= exponent; + else + val >>= -exponent; + + return val; +} + +static int +mp2891_identify_vout_scale(struct i2c_client *client, struct pmbus_driver_info *info, + int page) +{ + struct mp2891_data *data = to_mp2891_data(info); + int ret; + + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_word_data(client, MFR_VOUT_LOOP_CTRL); + if (ret < 0) + return ret; + + /* + * The output voltage is equal to the READ_VOUT(0x8B) register value multiplied + * by vout_scale. + * Obtain vout scale from the register MFR_VOUT_LOOP_CTRL, bits 15-14,bit 13. + * If MFR_VOUT_LOOP_CTRL[13] = 1, the vout scale is below: + * 2.5mV/LSB + * If MFR_VOUT_LOOP_CTRL[13] = 0, the vout scale is decided by + * MFR_VOUT_LOOP_CTRL[15:14]: + * 00b - 6.25mV/LSB, 01b - 5mV/LSB, 10b - 2mV/LSB, 11b - 1mV + */ + if (ret & GENMASK(13, 13)) { + data->vout_scale[page] = 250; + } else { + ret = FIELD_GET(GENMASK(15, 14), ret); + if (ret == 0) + data->vout_scale[page] = 625; + else if (ret == 1) + data->vout_scale[page] = 500; + else if (ret == 2) + data->vout_scale[page] = 200; + else + data->vout_scale[page] = 100; + } + + return 0; +} + +static int +mp2891_identify_iout_scale(struct i2c_client *client, struct pmbus_driver_info *info, + int page) +{ + struct mp2891_data *data = to_mp2891_data(info); + int ret; + + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_word_data(client, MFR_SVI3_IOUT_PRT); + if (ret < 0) + return ret; + + /* + * The output current is equal to the READ_IOUT(0x8C) register value + * multiplied by iout_scale. + * Obtain iout_scale from the register MFR_SVI3_IOUT_PRT[2:0]. + * The value is selected as below: + * 000b - 1A/LSB, 001b - (1/32)A/LSB, 010b - (1/16)A/LSB, + * 011b - (1/8)A/LSB, 100b - (1/4)A/LSB, 101b - (1/2)A/LSB + * 110b - 1A/LSB, 111b - 2A/LSB + */ + switch (ret & GENMASK(2, 0)) { + case 0: + case 6: + data->iout_scale[page] = 32; + break; + case 1: + data->iout_scale[page] = 1; + break; + case 2: + data->iout_scale[page] = 2; + break; + case 3: + data->iout_scale[page] = 4; + break; + case 4: + data->iout_scale[page] = 8; + break; + case 5: + data->iout_scale[page] = 16; + break; + default: + data->iout_scale[page] = 64; + break; + } + + return 0; +} + +static int mp2891_identify(struct i2c_client *client, struct pmbus_driver_info *info) +{ + int ret; + + /* Identify vout scale for rail 1. */ + ret = mp2891_identify_vout_scale(client, info, 0); + if (ret < 0) + return ret; + + /* Identify vout scale for rail 2. */ + ret = mp2891_identify_vout_scale(client, info, 1); + if (ret < 0) + return ret; + + /* Identify iout scale for rail 1. */ + ret = mp2891_identify_iout_scale(client, info, 0); + if (ret < 0) + return ret; + + /* Identify iout scale for rail 2. */ + return mp2891_identify_iout_scale(client, info, 1); +} + +static int mp2891_read_byte_data(struct i2c_client *client, int page, int reg) +{ + int ret; + + switch (reg) { + case PMBUS_VOUT_MODE: + /* + * The MP2891 does not follow standard PMBus protocol completely, the + * PMBUS_VOUT_MODE(0x20) in MP2891 is reserved and 0x00 is always + * returned when the register is read. But the calculation of vout in + * this driver is based on direct format. As a result, the format of + * vout is enforced to direct. + */ + ret = PB_VOUT_MODE_DIRECT; + break; + default: + ret = -ENODATA; + break; + } + + return ret; +} + +static int mp2891_read_word_data(struct i2c_client *client, int page, + int phase, int reg) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct mp2891_data *data = to_mp2891_data(info); + int ret; + + switch (reg) { + case PMBUS_READ_VIN: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = ret & GENMASK(9, 0); + break; + case PMBUS_READ_IIN: + /* + * The MP2891 does not have standard PMBUS_READ_IIN register(0x89), + * the iin telemetry can be obtained through the vender redefined + * register READ_IIN_EST(0x95). The MP2891 PMBUS_READ_IIN register + * is linear11 format, But the pout scale is set to 1A/Lsb(using + * r/m/b scale). As a result, the iin read from MP2891 should be + * calculated to A, then return the result to pmbus core. + */ + ret = pmbus_read_word_data(client, page, phase, READ_IIN_EST); + if (ret < 0) + return ret; + + ret = mp2891_reg2data_linear11(ret); + break; + case PMBUS_READ_PIN: + /* + * The MP2891 has standard PMBUS_READ_PIN register(0x97), but this + * is not used to read the input power per rail. The input power + * per rail is read through the vender redefined register + * READ_PIN_EST(0x94). The MP2891 PMBUS_READ_PIN register is linear11 + * format, But the pout scale is set to 1W/Lsb(using r/m/b scale). + * As a result, the pin read from MP2891 should be calculated to W, + * then return the result to pmbus core. + */ + ret = pmbus_read_word_data(client, page, phase, READ_PIN_EST); + if (ret < 0) + return ret; + + ret = mp2891_reg2data_linear11(ret); + break; + case PMBUS_READ_POUT: + /* + * The MP2891 PMBUS_READ_POUT register is linear11 format, and the + * exponent is not a constant value. But the pout scale is set to + * 1W/Lsb(using r/m/b scale). As a result, the pout read from MP2891 + * should be calculated to W, then return the result to pmbus core. + */ + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = mp2891_reg2data_linear11(ret); + break; + case PMBUS_READ_VOUT: + case PMBUS_VOUT_UV_WARN_LIMIT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST(ret * data->vout_scale[page], MP2891_VOUT_SCALE_DIV); + break; + case PMBUS_READ_IOUT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST((ret & GENMASK(10, 0)) * data->iout_scale[page], + MP2891_IOUT_SCALE_DIV); + break; + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_OT_WARN_LIMIT: + /* + * The scale of MP2891 PMBUS_OT_FAULT_LIMIT and PMBUS_OT_WARN_LIMIT + * is 1°C/LSB and they have 40°C offset. + */ + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = (ret & GENMASK(7, 0)) - MP2891_TEMP_LIMIT_OFFSET; + break; + case PMBUS_VIN_OV_FAULT_LIMIT: + /* + * The MP2891 PMBUS_VIN_OV_FAULT_LIMIT scale is 125mV/Lsb. + * but the vin scale is set to 31.25mV/Lsb(using r/m/b scale). + * As a result, the limit value should be multiplied by 4. + */ + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = (ret & GENMASK(7, 0)) * 4; + break; + case PMBUS_VOUT_UV_FAULT_LIMIT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + if (FIELD_GET(GENMASK(11, 8), ret)) + ret = FIELD_GET(GENMASK(7, 0), ret) * MP2891_UV_LIMIT_SCALE - + (FIELD_GET(GENMASK(11, 8), ret) + 1) * MP2891_OVUV_DELTA_SCALE; + else + ret = FIELD_GET(GENMASK(7, 0), ret) * MP2891_UV_LIMIT_SCALE; + + ret = ret < 0 ? 0 : ret; + break; + case PMBUS_VOUT_OV_FAULT_LIMIT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + if (FIELD_GET(GENMASK(11, 8), ret)) + ret = FIELD_GET(GENMASK(7, 0), ret) * MP2891_OV_LIMIT_SCALE + + (FIELD_GET(GENMASK(11, 8), ret) + 1) * MP2891_OVUV_DELTA_SCALE; + else + ret = FIELD_GET(GENMASK(7, 0), ret) * MP2891_OV_LIMIT_SCALE; + break; + case PMBUS_IOUT_OC_WARN_LIMIT: + case PMBUS_IOUT_OC_FAULT_LIMIT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST((ret & GENMASK(7, 0)) * data->iout_scale[page] * + MP2891_IOUT_LIMIT_UINT, MP2891_IOUT_SCALE_DIV); + break; + case PMBUS_IIN_OC_WARN_LIMIT: + /* + * The scale of PMBUS_IIN_OC_WARN_LIMIT is 0.5A/Lsb, but the iin scale + * is set to 1A/Lsb(using r/m/b scale), so the word data should be + * divided by 2. + */ + ret = pmbus_read_word_data(client, 0, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST((ret & GENMASK(9, 0)), 2); + break; + case PMBUS_PIN_OP_WARN_LIMIT: + /* + * The scale of PMBUS_PIN_OP_WARN_LIMIT is 2W/Lsb, but the pin scale + * is set to 1W/Lsb(using r/m/b scale), so the word data should be + * multiplied by 2. + */ + ret = pmbus_read_word_data(client, 0, phase, reg); + if (ret < 0) + return ret; + + ret = (ret & GENMASK(9, 0)) * MP2891_PIN_LIMIT_UINT; + break; + case PMBUS_READ_TEMPERATURE_1: + case PMBUS_VIN_UV_FAULT_LIMIT: + case PMBUS_VIN_UV_WARN_LIMIT: + ret = -ENODATA; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int mp2891_write_word_data(struct i2c_client *client, int page, int reg, + u16 word) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct mp2891_data *data = to_mp2891_data(info); + int ret; + + switch (reg) { + case PMBUS_VOUT_UV_WARN_LIMIT: + ret = pmbus_write_word_data(client, page, reg, + DIV_ROUND_CLOSEST(word * MP2891_VOUT_SCALE_DIV, + data->vout_scale[page])); + break; + case PMBUS_VOUT_UV_FAULT_LIMIT: + /* + * The PMBUS_VOUT_UV_FAULT_LIMIT[7:0] is the limit value, and bit8-bit15 + * should not be changed. + */ + ret = pmbus_read_word_data(client, page, 0xff, reg); + if (ret < 0) + return ret; + + if (FIELD_GET(GENMASK(11, 8), ret)) + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(7, 0)) | + FIELD_PREP(GENMASK(7, 0), + DIV_ROUND_CLOSEST(word + + (FIELD_GET(GENMASK(11, 8), ret) + 1) * + MP2891_OVUV_DELTA_SCALE, + MP2891_UV_LIMIT_SCALE))); + else + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(7, 0)) | + FIELD_PREP(GENMASK(7, 0), + DIV_ROUND_CLOSEST(word, + MP2891_UV_LIMIT_SCALE))); + break; + case PMBUS_VOUT_OV_FAULT_LIMIT: + /* + * The PMBUS_VOUT_OV_FAULT_LIMIT[7:0] is the limit value, and bit8-bit15 + * should not be changed. + */ + ret = pmbus_read_word_data(client, page, 0xff, reg); + if (ret < 0) + return ret; + + if (FIELD_GET(GENMASK(11, 8), ret)) + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(7, 0)) | + FIELD_PREP(GENMASK(7, 0), + DIV_ROUND_CLOSEST(word - + (FIELD_GET(GENMASK(11, 8), ret) + 1) * + MP2891_OVUV_DELTA_SCALE, + MP2891_OV_LIMIT_SCALE))); + else + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(7, 0)) | + FIELD_PREP(GENMASK(7, 0), + DIV_ROUND_CLOSEST(word, + MP2891_OV_LIMIT_SCALE))); + break; + case PMBUS_VIN_OV_FAULT_LIMIT: + /* + * The PMBUS_VIN_OV_FAULT_LIMIT[7:0] is the limit value, and bit8-bit15 + * should not be changed. The scale of PMBUS_VIN_OV_FAULT_LIMIT is 125mV/Lsb, + * but the vin scale is set to 31.25mV/Lsb(using r/m/b scale), so the word data + * should be divided by 4. + */ + ret = pmbus_read_word_data(client, page, 0xff, reg); + if (ret < 0) + return ret; + + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(7, 0)) | + FIELD_PREP(GENMASK(7, 0), + DIV_ROUND_CLOSEST(word, 4))); + break; + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_OT_WARN_LIMIT: + /* + * The scale of MP2891 PMBUS_OT_FAULT_LIMIT and PMBUS_OT_WARN_LIMIT + * have 40°C offset. The bit0-bit7 is the limit value, and bit8-bit15 + * should not be changed. + */ + ret = pmbus_read_word_data(client, page, 0xff, reg); + if (ret < 0) + return ret; + + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(7, 0)) | + FIELD_PREP(GENMASK(7, 0), word + MP2891_TEMP_LIMIT_OFFSET)); + break; + case PMBUS_IOUT_OC_WARN_LIMIT: + case PMBUS_IOUT_OC_FAULT_LIMIT: + ret = pmbus_write_word_data(client, page, reg, + DIV_ROUND_CLOSEST(word * MP2891_IOUT_SCALE_DIV, + MP2891_IOUT_LIMIT_UINT * + data->iout_scale[page])); + break; + case PMBUS_IIN_OC_WARN_LIMIT: + /* + * The scale of PMBUS_IIN_OC_WARN_LIMIT is 0.5A/Lsb, but the iin scale + * is set to 1A/Lsb(using r/m/b scale), so the word data should be + * multiplied by 2. + */ + ret = pmbus_write_word_data(client, page, reg, word * 2); + break; + case PMBUS_PIN_OP_WARN_LIMIT: + /* + * The scale of PMBUS_PIN_OP_WARN_LIMIT is 2W/Lsb, but the pin scale + * is set to 1W/Lsb(using r/m/b scale), so the word data should be + * divided by 2. + */ + ret = pmbus_write_word_data(client, page, reg, + DIV_ROUND_CLOSEST(word, MP2891_PIN_LIMIT_UINT)); + break; + case PMBUS_VIN_UV_FAULT_LIMIT: + case PMBUS_VIN_UV_WARN_LIMIT: + ret = -ENODATA; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static const struct pmbus_driver_info mp2891_info = { + .pages = MP2891_PAGE_NUM, + .format[PSC_VOLTAGE_IN] = direct, + .format[PSC_CURRENT_IN] = direct, + .format[PSC_CURRENT_OUT] = direct, + .format[PSC_TEMPERATURE] = direct, + .format[PSC_POWER] = direct, + .format[PSC_VOLTAGE_OUT] = direct, + + /* set vin scale 31.25mV/Lsb */ + .m[PSC_VOLTAGE_IN] = 32, + .R[PSC_VOLTAGE_IN] = 0, + .b[PSC_VOLTAGE_IN] = 0, + + /* set temp scale 1000m°C/Lsb */ + .m[PSC_TEMPERATURE] = 1, + .R[PSC_TEMPERATURE] = 0, + .b[PSC_TEMPERATURE] = 0, + + .m[PSC_CURRENT_IN] = 1, + .R[PSC_CURRENT_IN] = 0, + .b[PSC_CURRENT_IN] = 0, + + .m[PSC_CURRENT_OUT] = 1, + .R[PSC_CURRENT_OUT] = 0, + .b[PSC_CURRENT_OUT] = 0, + + .m[PSC_POWER] = 1, + .R[PSC_POWER] = 0, + .b[PSC_POWER] = 0, + + .m[PSC_VOLTAGE_OUT] = 1, + .R[PSC_VOLTAGE_OUT] = 3, + .b[PSC_VOLTAGE_OUT] = 0, + + .func[0] = MP2891_RAIL1_FUNC, + .func[1] = MP2891_RAIL2_FUNC, + .read_word_data = mp2891_read_word_data, + .write_word_data = mp2891_write_word_data, + .read_byte_data = mp2891_read_byte_data, + .identify = mp2891_identify, +}; + +static int mp2891_probe(struct i2c_client *client) +{ + struct mp2891_data *data; + + data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + memcpy(&data->info, &mp2891_info, sizeof(mp2891_info)); + + return pmbus_do_probe(client, &data->info); +} + +static const struct i2c_device_id mp2891_id[] = { + {"mp2891", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, mp2891_id); + +static const struct of_device_id __maybe_unused mp2891_of_match[] = { + {.compatible = "mps,mp2891"}, + {} +}; +MODULE_DEVICE_TABLE(of, mp2891_of_match); + +static struct i2c_driver mp2891_driver = { + .driver = { + .name = "mp2891", + .of_match_table = mp2891_of_match, + }, + .probe = mp2891_probe, + .id_table = mp2891_id, +}; + +module_i2c_driver(mp2891_driver); + +MODULE_AUTHOR("Noah Wang "); +MODULE_DESCRIPTION("PMBus driver for MPS MP2891"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(PMBUS);