From patchwork Mon Jun 22 18:59:04 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dan Murphy X-Patchwork-Id: 191375 Delivered-To: patch@linaro.org Received: by 2002:a54:3249:0:0:0:0:0 with SMTP id g9csp422386ecs; Mon, 22 Jun 2020 12:00:20 -0700 (PDT) X-Google-Smtp-Source: ABdhPJziVbPD/+aNb1sgmlbOgws+NiF+EwhHPnNuw0zKdelM5HVjBMygWrkc8FayT4ryY3MoOOMF X-Received: by 2002:a05:6402:3069:: with SMTP id bs9mr17968990edb.194.1592852420706; Mon, 22 Jun 2020 12:00:20 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1592852420; cv=none; d=google.com; s=arc-20160816; b=xJjJ4tcDWQ9PU/eMbajkt+wcFmK3prTwyuWhVF9HKKcgAbddOkmq/XPnshRyDVedh0 h1QG6c+lyDhzyijK2fFGjwOb/cBly18o70AvLCaTJXJieV8ePQWreOFmPNYazcMHUPJ7 1MsYjOOEQn9cSt2kU/teAPGOFewEZLf08AxaZhfWng46cwolq/n196wYyEAcV2MGxYg3 nEGAXPc50nX3MAlCOaCpMWRbIGVx5n1X9thE0qCjDJwirRmIkn4i0gYzukQu0T1JLXfe 2fXSqa49aSMPsglgIh7YAHskdEvrr9FZXyXVHH4GYjWZE059tYEJx3eMbA6t54R7Ss2i Jdlg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=Ris2/4w6GDy898Yv1LyxocRRHlnY97ZT12syvx8SG/4=; b=ry5rZ3JSe7WF4p4jisfRxUJtnx2D0lpEx/bY0BQw0MQ2h22ibUEfvO1ZdpeimqT7iy js5sP4RDH8vsig0UJ1NwhnmgDtdRyZ8MnpNYZtmRn1Ml8kPxmQZCmlejVmLUMQjzNjVk b8wJOyQX1c37PMbI9VUJIRKQjDohUq2bTGFTpk0uwfQFPKtKFfIp2TtzmGtT3K0VRzEz iOQcoCA/Ne3ZeS6FaEltk8m5Wg+rXyAeHNjGRuU4NAxiAZJInV7hKbCS+RZHa+zydmip d8D7l5bv9DKX1eJDOpee9m9MzCOavRH6pWtSJZPHytcMRnZl2JrHrQc9DKw1dEWIygIG 7mKw== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b=pnZoUWZn; spf=pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-leds-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id p13si9379973ejf.178.2020.06.22.12.00.20; Mon, 22 Jun 2020 12:00:20 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b=pnZoUWZn; spf=pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-leds-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730110AbgFVTAS (ORCPT + 1 other); Mon, 22 Jun 2020 15:00:18 -0400 Received: from lelv0142.ext.ti.com ([198.47.23.249]:51948 "EHLO lelv0142.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730441AbgFVS7r (ORCPT ); Mon, 22 Jun 2020 14:59:47 -0400 Received: from lelv0265.itg.ti.com ([10.180.67.224]) by lelv0142.ext.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxMLn067290; Mon, 22 Jun 2020 13:59:22 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1592852362; bh=Ris2/4w6GDy898Yv1LyxocRRHlnY97ZT12syvx8SG/4=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=pnZoUWZn5zfsRjk+RjCes0S8QwR5u9cnhyApug+LhgdtJQ2j3nDRDoaOQjK2+Os9D FK+zFvA4s9Sh1Bf6E2v1mrYQOAxheSGdPHGHt/RxKc/XsoEn4wk8JTqdAbRJgc5eke 9wAm71iaPZn4O6ALIuVU9i/HbeDRD3HoBgH6CSkM= Received: from DLEE115.ent.ti.com (dlee115.ent.ti.com [157.170.170.26]) by lelv0265.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 05MIxMeR029763 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Mon, 22 Jun 2020 13:59:22 -0500 Received: from DLEE105.ent.ti.com (157.170.170.35) by DLEE115.ent.ti.com (157.170.170.26) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Mon, 22 Jun 2020 13:59:22 -0500 Received: from lelv0327.itg.ti.com (10.180.67.183) by DLEE105.ent.ti.com (157.170.170.35) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Mon, 22 Jun 2020 13:59:22 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0327.itg.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxL1Z113354; Mon, 22 Jun 2020 13:59:22 -0500 From: Dan Murphy To: , , CC: , , , , Dan Murphy Subject: [PATCH v29 01/16] dt: bindings: Add multicolor class dt bindings documention Date: Mon, 22 Jun 2020 13:59:04 -0500 Message-ID: <20200622185919.2131-2-dmurphy@ti.com> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200622185919.2131-1-dmurphy@ti.com> References: <20200622185919.2131-1-dmurphy@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-leds-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-leds@vger.kernel.org Add DT bindings for the LEDs multicolor class framework. Add multicolor ID to the color ID list for device tree bindings. CC: Rob Herring Acked-by: Pavel Machek Acked-by: Jacek Anaszewski Signed-off-by: Dan Murphy --- .../bindings/leds/leds-class-multicolor.yaml | 37 +++++++++++++++++++ include/dt-bindings/leds/common.h | 3 +- 2 files changed, 39 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml -- 2.26.2 Reviewed-by: Rob Herring diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml new file mode 100644 index 000000000000..b55e1f1308a4 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-class-multicolor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common properties for the multicolor LED class. + +maintainers: + - Dan Murphy + +description: | + Bindings for multi color LEDs show how to describe current outputs of + either integrated multi-color LED elements (like RGB, RGBW, RGBWA-UV + etc.) or standalone LEDs, to achieve logically grouped multi-color LED + modules. This is achieved by adding multi-led nodes layer to the + monochrome LED bindings. + The nodes and properties defined in this document are unique to the multicolor + LED class. Common LED nodes and properties are inherited from the common.txt + within this documentation directory. + +patternProperties: + "^multi-led@([0-9a-f])$": + type: object + description: Represents the LEDs that are to be grouped. + properties: + color: + const: 8 # LED_COLOR_ID_MULTI + description: | + For multicolor LED support this property should be defined as + LED_COLOR_ID_MULTI which can be found in include/linux/leds/common.h. + + $ref: "common.yaml#" + + required: + - color +... diff --git a/include/dt-bindings/leds/common.h b/include/dt-bindings/leds/common.h index 0ce7dfc00dcb..a463ce6a8794 100644 --- a/include/dt-bindings/leds/common.h +++ b/include/dt-bindings/leds/common.h @@ -30,7 +30,8 @@ #define LED_COLOR_ID_VIOLET 5 #define LED_COLOR_ID_YELLOW 6 #define LED_COLOR_ID_IR 7 -#define LED_COLOR_ID_MAX 8 +#define LED_COLOR_ID_MULTI 8 +#define LED_COLOR_ID_MAX 9 /* Standard LED functions */ /* Keyboard LEDs, usually it would be input4::capslock etc. */ From patchwork Mon Jun 22 18:59:05 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dan Murphy X-Patchwork-Id: 191365 Delivered-To: patch@linaro.org Received: by 2002:a54:3249:0:0:0:0:0 with SMTP id g9csp421833ecs; Mon, 22 Jun 2020 11:59:34 -0700 (PDT) X-Google-Smtp-Source: ABdhPJySSwVLcyTfWLFEja+hFAkW4/Mjo/zcLPK5YN63P9gmgaFNGDVLBkjd50/cjP7v2MeLxXtL X-Received: by 2002:a17:906:f2c4:: with SMTP id gz4mr2596179ejb.484.1592852374816; Mon, 22 Jun 2020 11:59:34 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1592852374; cv=none; d=google.com; s=arc-20160816; b=IbpFEpPCVs/FTTsTt+7mCRAv2FtVyTT4tbNRFrbWJ3MT1mINgyFhpoNRerpAh9uc3W m/S0QUypTjwIGTVnOXdFjZZe6z5RxUdl8DE+VBnijFOnLARu03ipD7Thp+IYaVGTmvQZ cWlna0WKxW9w3tBRoTxShzA8HPY3tmhs4uXuCCpsP4pk7qK2XebD659x+h4HU48cf4HB OKXXr6/r12TQ3q6D09uDqJRPQlzSqO1kOcdvJWE3agFwOk3McAbJNinxQPfEmTVlQ8xK rtnLzxN075emTl5a55sH3+e3G+U4WiKZR/09qPTlEPOJSZ71SwLTtrRYZGGFQ0JeHTpI YbpQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=V2VikCqHW+vjr+5pGiSTht8WRqjdCKy+EM301kkEwzI=; b=E4SKos66g50+ykg3QabSM7B+Djj+VwBjtlBc4QZBvZDyud5OJzHuR7metAf7SK7yKH vh1QHPy31RnODQLyN6UZo/kp2Q1zfXdgU5vMPOYoSr6yVQTrjx/xJWQaqPVMwiQMqHQK sfCsOJmcLjDTSXmrwYl5syDm345cEWkRwWKSOEup287OyyQMWTRWkfRzB+vDzvnOQGWE DEYNYNK8O0+AkpDBusoSyWJcr1aYtVo3aQwswZbdh1rN30XYMHig8qKTU4REvIeSejpr eKs/i51rBIXBJ9x9/8u9zeorrFrdZ6LnY0TQIDZ5p2g+mGqjYcGfVPeP2vZCSKTtZePO J9wQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b=KvAmXkjk; spf=pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-leds-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id e5si9998130edk.409.2020.06.22.11.59.34; Mon, 22 Jun 2020 11:59:34 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b=KvAmXkjk; spf=pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-leds-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730314AbgFVS7e (ORCPT + 1 other); Mon, 22 Jun 2020 14:59:34 -0400 Received: from fllv0016.ext.ti.com ([198.47.19.142]:60918 "EHLO fllv0016.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730312AbgFVS7e (ORCPT ); Mon, 22 Jun 2020 14:59:34 -0400 Received: from fllv0035.itg.ti.com ([10.64.41.0]) by fllv0016.ext.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxOMt053490; Mon, 22 Jun 2020 13:59:24 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1592852364; bh=V2VikCqHW+vjr+5pGiSTht8WRqjdCKy+EM301kkEwzI=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=KvAmXkjk+P9QFvX0E+QOx+Pu5dBw73VJjWmvNfNAuGQqcsSMxqe0dOOEtBN6rBaUO n+aL3fAmh0rtvBmzuyUJi1aoGUlP46nDf+Wdgx0Sn8GD2HRiIEI+B4oUtWzhpMfQJY xBhAjVqV1Blc0qf3mvB5eStntazhRQnRJ2LESoik= Received: from DLEE115.ent.ti.com (dlee115.ent.ti.com [157.170.170.26]) by fllv0035.itg.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxOg9095972; Mon, 22 Jun 2020 13:59:24 -0500 Received: from DLEE113.ent.ti.com (157.170.170.24) by DLEE115.ent.ti.com (157.170.170.26) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Mon, 22 Jun 2020 13:59:23 -0500 Received: from fllv0039.itg.ti.com (10.64.41.19) by DLEE113.ent.ti.com (157.170.170.24) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Mon, 22 Jun 2020 13:59:23 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by fllv0039.itg.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxN3i078640; Mon, 22 Jun 2020 13:59:23 -0500 From: Dan Murphy To: , , CC: , , , , Dan Murphy Subject: [PATCH v29 02/16] leds: Add multicolor ID to the color ID list Date: Mon, 22 Jun 2020 13:59:05 -0500 Message-ID: <20200622185919.2131-3-dmurphy@ti.com> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200622185919.2131-1-dmurphy@ti.com> References: <20200622185919.2131-1-dmurphy@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-leds-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-leds@vger.kernel.org Add a new color ID that is declared as MULTICOLOR as with the multicolor framework declaring a definitive color is not accurate as the node can contain multiple colors. Signed-off-by: Dan Murphy --- drivers/leds/led-core.c | 1 + 1 file changed, 1 insertion(+) -- 2.26.2 diff --git a/drivers/leds/led-core.c b/drivers/leds/led-core.c index f1f718dbe0f8..846248a0693d 100644 --- a/drivers/leds/led-core.c +++ b/drivers/leds/led-core.c @@ -34,6 +34,7 @@ const char * const led_colors[LED_COLOR_ID_MAX] = { [LED_COLOR_ID_VIOLET] = "violet", [LED_COLOR_ID_YELLOW] = "yellow", [LED_COLOR_ID_IR] = "ir", + [LED_COLOR_ID_MULTI] = "multicolor", }; EXPORT_SYMBOL_GPL(led_colors); From patchwork Mon Jun 22 18:59:06 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dan Murphy X-Patchwork-Id: 208991 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-10.1 required=3.0 tests=DKIMWL_WL_HIGH, DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH, MAILING_LIST_MULTI, SIGNED_OFF_BY, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 0C5F5C433E0 for ; Mon, 22 Jun 2020 19:00:58 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id C4ACC2076A for ; Mon, 22 Jun 2020 19:00:57 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=ti.com header.i=@ti.com header.b="DYVuJTzE" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730345AbgFVS7h (ORCPT ); Mon, 22 Jun 2020 14:59:37 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:42306 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730030AbgFVS7f (ORCPT ); Mon, 22 Jun 2020 14:59:35 -0400 Received: from fllv0035.itg.ti.com ([10.64.41.0]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxPvq024906; Mon, 22 Jun 2020 13:59:25 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1592852365; bh=mBqFEUfuopdHZJQ9w3LLmKTJkooJn2E5KD6FCH6odOc=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=DYVuJTzEWKTvfLrDiXFMGn3KssQh6kD1Au6pRPjdN2I23a8aJ/qJDXFCZ62CIfwkX JuEXfWirb2hwqOfwa/RLgJtok1lp/j0dLQ45xqChYt7BCmX1SF/H/lZX7iBG2qLObF TdOVSmbLGhsmWWVx1pwEx+nBHKugsWyTMuUPCMyg= Received: from DFLE109.ent.ti.com (dfle109.ent.ti.com [10.64.6.30]) by fllv0035.itg.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxPLL095980; Mon, 22 Jun 2020 13:59:25 -0500 Received: from DFLE113.ent.ti.com (10.64.6.34) by DFLE109.ent.ti.com (10.64.6.30) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Mon, 22 Jun 2020 13:59:24 -0500 Received: from fllv0040.itg.ti.com (10.64.41.20) by DFLE113.ent.ti.com (10.64.6.34) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Mon, 22 Jun 2020 13:59:24 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by fllv0040.itg.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxOws025094; Mon, 22 Jun 2020 13:59:24 -0500 From: Dan Murphy To: , , CC: , , , , Dan Murphy Subject: [PATCH v29 03/16] leds: multicolor: Introduce a multicolor class definition Date: Mon, 22 Jun 2020 13:59:06 -0500 Message-ID: <20200622185919.2131-4-dmurphy@ti.com> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200622185919.2131-1-dmurphy@ti.com> References: <20200622185919.2131-1-dmurphy@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-leds-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-leds@vger.kernel.org Introduce a multicolor class that groups colored LEDs within a LED node. The multi color class groups monochrome LEDs and allows controlling two aspects of the final combined color: hue and lightness. The former is controlled via the intensity file and the latter is controlled via brightness file. Acked-by: Jacek Anaszewski Signed-off-by: Dan Murphy --- .../ABI/testing/sysfs-class-led-multicolor | 36 +++ Documentation/leds/index.rst | 1 + Documentation/leds/leds-class-multicolor.rst | 88 ++++++++ drivers/leds/Kconfig | 10 + drivers/leds/Makefile | 1 + drivers/leds/led-class-multicolor.c | 208 ++++++++++++++++++ include/linux/led-class-multicolor.h | 121 ++++++++++ 7 files changed, 465 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-class-led-multicolor create mode 100644 Documentation/leds/leds-class-multicolor.rst create mode 100644 drivers/leds/led-class-multicolor.c create mode 100644 include/linux/led-class-multicolor.h diff --git a/Documentation/ABI/testing/sysfs-class-led-multicolor b/Documentation/ABI/testing/sysfs-class-led-multicolor new file mode 100644 index 000000000000..cd96cfb4093b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-led-multicolor @@ -0,0 +1,36 @@ +What: /sys/class/leds//brightness +Date: March 2020 +KernelVersion: 5.8 +Contact: Dan Murphy +Description: read/write + Writing to this file will update all LEDs within the group to a + calculated percentage of what each color LED intensity is set + to. The percentage is calculated for each grouped LED via the + equation below: + + led_brightness = brightness * multi_intensity/max_brightness + + For additional details please refer to + Documentation/leds/leds-class-multicolor.rst. + + The value of the LED is from 0 to + /sys/class/leds//max_brightness. + +What: /sys/class/leds//multi_index +Date: March 2020 +KernelVersion: 5.8 +Contact: Dan Murphy +Description: read + The multi_index array, when read, will output the LED colors + as an array of strings as they are indexed in the + multi_intensity file. + +What: /sys/class/leds//multi_intensity +Date: March 2020 +KernelVersion: 5.8 +Contact: Dan Murphy +Description: read/write + Intensity level for the LED color within an array of integers. + The intensities for each color must be entered based on the + multi_index array. The max_intensity should not exceed + /sys/class/leds//max_brightness. diff --git a/Documentation/leds/index.rst b/Documentation/leds/index.rst index 060f4e485897..bc70c6aa7138 100644 --- a/Documentation/leds/index.rst +++ b/Documentation/leds/index.rst @@ -9,6 +9,7 @@ LEDs leds-class leds-class-flash + leds-class-multicolor ledtrig-oneshot ledtrig-transient ledtrig-usbport diff --git a/Documentation/leds/leds-class-multicolor.rst b/Documentation/leds/leds-class-multicolor.rst new file mode 100644 index 000000000000..2dcde711c51c --- /dev/null +++ b/Documentation/leds/leds-class-multicolor.rst @@ -0,0 +1,88 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================================== +MultiColor LED handling under Linux +==================================== + +Description +=========== +The multicolor class groups monochrome LEDs and allows controlling two +aspects of the final combined color: hue and lightness. The former is +controlled via the multi_intensity array file and the latter is controlled +via brightness file. + +Multicolor Class Control +======================== +The multicolor class presents files that groups the colors as indexes in an +array. These files are children under the LED parent node created by the +led_class framework. The led_class framework is documented in led-class.rst +within this documentation directory. + +Each colored LED will be indexed under the multi_* files. The order of the +colors will be arbitrary. The multi_index file can be read to determine the +color name to indexed value. + +The multi_index file is an array that contains the string list of the colors as +they are defined in each multi_* array file. + +The multi_intensity is an array that can be read or written to for the +individual color intensities. All elements within this array must be written in +order for the color LED intensities to be updated. + +Directory Layout Example +======================== +root:/sys/class/leds/multicolor:status# ls -lR +-rw-r--r-- 1 root root 4096 Oct 19 16:16 brightness +-r--r--r-- 1 root root 4096 Oct 19 16:16 max_brightness +-r--r--r-- 1 root root 4096 Oct 19 16:16 multi_index +-rw-r--r-- 1 root root 4096 Oct 19 16:16 multi_intensity + +Multicolor Class Brightness Control +=================================== +The multicolor class framework will calculate each monochrome LEDs intensity. + +The brightness level for each LED is calculated based on the color LED +intensity setting divided by the global max_brightness setting multiplied by +the requested brightness. + +led_brightness = brightness * multi_intensity/max_brightness + +Example: +A user first writes the multi_intensity file with the brightness levels +for each LED that are necessary to achieve a certain color output from a +multicolor LED group. + +cat /sys/class/leds/multicolor:status/multi_index +green blue red + +echo 43 226 138 > /sys/class/leds/multicolor:status/multi_intensity + +red - + intensity = 138 + max_brightness = 255 +green - + intensity = 43 + max_brightness = 255 +blue - + intensity = 226 + max_brightness = 255 + +The user can control the brightness of that multicolor LED group by writing the +global 'brightness' control. Assuming a max_brightness of 255 the user +may want to dim the LED color group to half. The user would write a value of +128 to the global brightness file then the values written to each LED will be +adjusted base on this value. + +cat /sys/class/leds/multicolor:status/max_brightness +255 +echo 128 > /sys/class/leds/multicolor:status/brightness + +adjusted_red_value = 128 * 138/255 = 69 +adjusted_green_value = 128 * 43/255 = 21 +adjusted_blue_value = 128 * 226/255 = 113 + +Reading the global brightness file will return the current brightness value of +the color LED group. + +cat /sys/class/leds/multicolor:status/brightness +128 diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index ed943140e1fd..0d034453eeb9 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -30,6 +30,16 @@ config LEDS_CLASS_FLASH for the flash related features of a LED device. It can be built as a module. +config LEDS_CLASS_MULTI_COLOR + tristate "LED MultiColor Class Support" + depends on LEDS_CLASS + help + This option enables the multicolor LED sysfs class in /sys/class/leds. + It wraps LED class and adds multicolor LED specific sysfs attributes + and kernel internal API to it. You'll need this to provide support + for multicolor LEDs that are grouped together. This class is not + intended for single color LEDs. It can be built as a module. + config LEDS_BRIGHTNESS_HW_CHANGED bool "LED Class brightness_hw_changed attribute support" depends on LEDS_CLASS diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index d6b8a792c936..53a752c32e67 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_NEW_LEDS) += led-core.o obj-$(CONFIG_LEDS_CLASS) += led-class.o obj-$(CONFIG_LEDS_CLASS_FLASH) += led-class-flash.o +obj-$(CONFIG_LEDS_CLASS_MULTI_COLOR) += led-class-multicolor.o obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o # LED Platform Drivers (keep this sorted, M-| sort) diff --git a/drivers/leds/led-class-multicolor.c b/drivers/leds/led-class-multicolor.c new file mode 100644 index 000000000000..ae4f9c63db8d --- /dev/null +++ b/drivers/leds/led-class-multicolor.c @@ -0,0 +1,208 @@ +// SPDX-License-Identifier: GPL-2.0 +// LED Multi Color class interface +// Copyright (C) 2019-20 Texas Instruments Incorporated - http://www.ti.com/ +// Author: Dan Murphy + +#include +#include +#include +#include +#include +#include + +#include "leds.h" + +int led_mc_calc_color_components(struct led_classdev_mc *mcled_cdev, + enum led_brightness brightness) +{ + struct led_classdev *led_cdev = &mcled_cdev->led_cdev; + int i; + + for (i = 0; i < mcled_cdev->num_colors; i++) + mcled_cdev->subled_info[i].brightness = brightness * + mcled_cdev->subled_info[i].intensity / + led_cdev->max_brightness; + + return 0; +} +EXPORT_SYMBOL_GPL(led_mc_calc_color_components); + +static ssize_t multi_intensity_store(struct device *dev, + struct device_attribute *intensity_attr, + const char *buf, size_t size) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct led_classdev_mc *mcled_cdev = lcdev_to_mccdev(led_cdev); + int nrchars, offset = 0; + int intensity_value[LED_COLOR_ID_MAX]; + int i; + ssize_t ret; + + mutex_lock(&led_cdev->led_access); + + for (i = 0; i < mcled_cdev->num_colors; i++) { + ret = sscanf(buf + offset, "%i%n", + &intensity_value[i], &nrchars); + if (ret != 1) { + dev_dbg(led_cdev->dev, + "Incorrect number of LEDs expected %i values intensity was not applied\n", + mcled_cdev->num_colors); + ret = -EINVAL; + goto err_out; + } + offset += nrchars; + } + + /* account for the space at the end of the buffer */ + offset++; + if (offset < size) { + dev_dbg(led_cdev->dev, + "Incorrect number of LEDs expected %i values intensity was not applied\n", + mcled_cdev->num_colors); + ret = -EINVAL; + goto err_out; + } + + for (i = 0; i < mcled_cdev->num_colors; i++) + mcled_cdev->subled_info[i].intensity = intensity_value[i]; + + led_set_brightness(led_cdev, led_cdev->brightness); + ret = size; +err_out: + mutex_unlock(&led_cdev->led_access); + return ret; +} + +static ssize_t multi_intensity_show(struct device *dev, + struct device_attribute *intensity_attr, + char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct led_classdev_mc *mcled_cdev = lcdev_to_mccdev(led_cdev); + int len = 0; + int i; + + for (i = 0; i < mcled_cdev->num_colors; i++) { + len += sprintf(buf + len, "%d", + mcled_cdev->subled_info[i].intensity); + len += sprintf(buf + len, " "); + } + + len += sprintf(buf + len, "\n"); + return len; +} +static DEVICE_ATTR_RW(multi_intensity); + +static ssize_t multi_index_show(struct device *dev, + struct device_attribute *multi_index_attr, + char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct led_classdev_mc *mcled_cdev = lcdev_to_mccdev(led_cdev); + int len = 0; + int index; + int i; + + for (i = 0; i < mcled_cdev->num_colors; i++) { + index = mcled_cdev->subled_info[i].color_index; + len += sprintf(buf + len, "%s", led_colors[index]); + len += sprintf(buf + len, " "); + } + + len += sprintf(buf + len, "\n"); + return len; +} +static DEVICE_ATTR_RO(multi_index); + +static struct attribute *led_multicolor_attrs[] = { + &dev_attr_multi_intensity.attr, + &dev_attr_multi_index.attr, + NULL, +}; +ATTRIBUTE_GROUPS(led_multicolor); + +int led_classdev_multicolor_register_ext(struct device *parent, + struct led_classdev_mc *mcled_cdev, + struct led_init_data *init_data) +{ + struct led_classdev *led_cdev; + + if (!mcled_cdev) + return -EINVAL; + + if (!mcled_cdev->num_colors) + return -EINVAL; + + if (mcled_cdev->num_colors > LED_COLOR_ID_MAX) + return -EINVAL; + + led_cdev = &mcled_cdev->led_cdev; + mcled_cdev->led_cdev.groups = led_multicolor_groups; + + return led_classdev_register_ext(parent, led_cdev, init_data); +} +EXPORT_SYMBOL_GPL(led_classdev_multicolor_register_ext); + +void led_classdev_multicolor_unregister(struct led_classdev_mc *mcled_cdev) +{ + if (!mcled_cdev) + return; + + led_classdev_unregister(&mcled_cdev->led_cdev); +} +EXPORT_SYMBOL_GPL(led_classdev_multicolor_unregister); + +static void devm_led_classdev_multicolor_release(struct device *dev, void *res) +{ + led_classdev_multicolor_unregister(*(struct led_classdev_mc **)res); +} + +int devm_led_classdev_multicolor_register_ext(struct device *parent, + struct led_classdev_mc *mcled_cdev, + struct led_init_data *init_data) +{ + struct led_classdev_mc **dr; + int ret; + + dr = devres_alloc(devm_led_classdev_multicolor_release, + sizeof(*dr), GFP_KERNEL); + if (!dr) + return -ENOMEM; + + ret = led_classdev_multicolor_register_ext(parent, mcled_cdev, + init_data); + if (ret) { + devres_free(dr); + return ret; + } + + *dr = mcled_cdev; + devres_add(parent, dr); + + return 0; +} +EXPORT_SYMBOL_GPL(devm_led_classdev_multicolor_register_ext); + +static int devm_led_classdev_multicolor_match(struct device *dev, + void *res, void *data) +{ + struct led_classdev_mc **p = res; + + if (WARN_ON(!p || !*p)) + return 0; + + return *p == data; +} + +void devm_led_classdev_multicolor_unregister(struct device *dev, + struct led_classdev_mc *mcled_cdev) +{ + WARN_ON(devres_release(dev, + devm_led_classdev_multicolor_release, + devm_led_classdev_multicolor_match, mcled_cdev)); +} +EXPORT_SYMBOL_GPL(devm_led_classdev_multicolor_unregister); + +MODULE_AUTHOR("Dan Murphy "); +MODULE_DESCRIPTION("Multi Color LED class interface"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/led-class-multicolor.h b/include/linux/led-class-multicolor.h new file mode 100644 index 000000000000..50bd986497f0 --- /dev/null +++ b/include/linux/led-class-multicolor.h @@ -0,0 +1,121 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* LED Multicolor class interface + * Copyright (C) 2019-20 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#ifndef _LINUX_MULTICOLOR_LEDS_H_INCLUDED +#define _LINUX_MULTICOLOR_LEDS_H_INCLUDED + +#include +#include + +struct mc_subled { + int color_index; + int brightness; + int intensity; + int channel; +}; + +struct led_classdev_mc { + /* led class device */ + struct led_classdev led_cdev; + int num_colors; + + struct mc_subled *subled_info; +}; + +static inline struct led_classdev_mc *lcdev_to_mccdev( + struct led_classdev *led_cdev) +{ + return container_of(led_cdev, struct led_classdev_mc, led_cdev); +} + +#if IS_ENABLED(CONFIG_LEDS_CLASS_MULTI_COLOR) +/** + * led_classdev_multicolor_register_ext - register a new object of led_classdev + * class with support for multicolor LEDs + * @parent: the multicolor LED to register + * @mcled_cdev: the led_classdev_mc structure for this device + * @init_data: the LED class Multi color device initialization data + * + * Returns: 0 on success or negative error value on failure + */ +int led_classdev_multicolor_register_ext(struct device *parent, + struct led_classdev_mc *mcled_cdev, + struct led_init_data *init_data); + +static inline int led_classdev_multicolor_register(struct device *parent, + struct led_classdev_mc *mcled_cdev) +{ + return led_classdev_multicolor_register_ext(parent, mcled_cdev, NULL); +} + +/** + * led_classdev_multicolor_unregister - unregisters an object of led_classdev + * class with support for multicolor LEDs + * @mcled_cdev: the multicolor LED to unregister + * + * Unregister a previously registered via led_classdev_multicolor_register + * object + */ +void led_classdev_multicolor_unregister(struct led_classdev_mc *mcled_cdev); + +/* Calculate brightness for the monochrome LED cluster */ +int led_mc_calc_color_components(struct led_classdev_mc *mcled_cdev, + enum led_brightness brightness); + +int devm_led_classdev_multicolor_register_ext(struct device *parent, + struct led_classdev_mc *mcled_cdev, + struct led_init_data *init_data); + +static inline int devm_led_classdev_multicolor_register(struct device *parent, + struct led_classdev_mc *mcled_cdev) +{ + return devm_led_classdev_multicolor_register_ext(parent, mcled_cdev, + NULL); +} + +void devm_led_classdev_multicolor_unregister(struct device *parent, + struct led_classdev_mc *mcled_cdev); +#else + +static inline int led_classdev_multicolor_register_ext(struct device *parent, + struct led_classdev_mc *mcled_cdev, + struct led_init_data *init_data) +{ + return -EINVAL; +} + +static inline int led_classdev_multicolor_register(struct device *parent, + struct led_classdev_mc *mcled_cdev) +{ + return led_classdev_multicolor_register_ext(parent, mcled_cdev, NULL); +} + +static inline void led_classdev_multicolor_unregister(struct led_classdev_mc *mcled_cdev) {}; +static inline int led_mc_calc_color_components(struct led_classdev_mc *mcled_cdev, + enum led_brightness brightness) +{ + return -EINVAL; +} + +static inline int devm_led_classdev_multicolor_register_ext(struct device *parent, + struct led_classdev_mc *mcled_cdev, + struct led_init_data *init_data) +{ + return -EINVAL; +} + +static inline int devm_led_classdev_multicolor_register(struct device *parent, + struct led_classdev_mc *mcled_cdev) +{ + return devm_led_classdev_multicolor_register_ext(parent, mcled_cdev, + NULL); +} + +static inline void devm_led_classdev_multicolor_unregister(struct device *parent, + struct led_classdev_mc *mcled_cdev) +{}; + +#endif /* IS_ENABLED(CONFIG_LEDS_CLASS_MULTI_COLOR) */ +#endif /* _LINUX_MULTICOLOR_LEDS_H_INCLUDED */ From patchwork Mon Jun 22 18:59:07 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dan Murphy X-Patchwork-Id: 191381 Delivered-To: patch@linaro.org Received: by 2002:a54:3249:0:0:0:0:0 with SMTP id g9csp422980ecs; Mon, 22 Jun 2020 12:01:04 -0700 (PDT) X-Google-Smtp-Source: ABdhPJx64q3Tru+nHbG4y+vjSaKOHrKxHV+u5lQaqoxN8lFwTjgqc5e1UgTqJkMa0812oS+B3PZu X-Received: by 2002:aa7:c245:: with SMTP id y5mr18738872edo.189.1592852464484; Mon, 22 Jun 2020 12:01:04 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1592852464; cv=none; d=google.com; s=arc-20160816; b=Ep+Wboe1MRNXYPAnBrFCJhKy3CFSgeOeZCIlkQV8cZaoOs2YxK5iMP22y6fRGajtM1 JTvXTdrgIUb0cvImhR5oyLNi8MtX9N/ZWBetG1pLEDhbaWHqJZxO8E6DXJ5LmYWoAcga 0upRz+zkGTLIIihWf0xAAYQ4+s2xtJ50KD8AwK3FaKACGA4qvoyW6o9lQMFlnoTUhmGx rhQzvLHL+Q8ROPFvWi1KL2NirHbCpIWCchnEAb3Lfe++flKRPSpiy8Wm6FBadeY527ya GI21H+QjGf1SSzLFBnL+ggJb/CXdrE+UBEp6ZuOK0Kxwg6bPhsx/ZPVYVnDzaTw9pW+/ n7Gg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=KO46+BZO9FK1L9LeP+DVFgDYwDa3llKlLNQ5IXCVyUQ=; b=n2LtLD3K78DPnwcy1707Y5+/3mdNi5KDtu5AJv6RTrcTH2AggpmBiS5pB+82UGqyRz 2hL4GDRMXqPnCP4wasTKEIaDr9seAY0nBJCjiOA+diDjmAIDwusa0qxZGjWh8a8tjtH1 ef4+nDbyqyMGJGyWaITq7c4Waoz1ULXg2eOGPmjzKqGFh5pTXBd7p4zyV6nNmFebPThM 7RzKWW6nSQUb08IxJ6wxBAGN8zcnm2KZLusMXv5W0zo7MTG5NVuc3UBASpt0RFeUt03f SQ4Q/UP0YQN/87P9gffAQEC0W8zhY/Qnhcy9G8q6o23LgrmlXJh0X6Z/k5UHrjYi8mzJ +DWA== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b="M/UXIXyc"; spf=pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-leds-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id w27si10780374edi.519.2020.06.22.12.01.04; Mon, 22 Jun 2020 12:01:04 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b="M/UXIXyc"; spf=pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-leds-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730664AbgFVTBD (ORCPT + 1 other); Mon, 22 Jun 2020 15:01:03 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:42304 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730309AbgFVS7e (ORCPT ); Mon, 22 Jun 2020 14:59:34 -0400 Received: from lelv0265.itg.ti.com ([10.180.67.224]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxQQT024911; Mon, 22 Jun 2020 13:59:26 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1592852366; bh=KO46+BZO9FK1L9LeP+DVFgDYwDa3llKlLNQ5IXCVyUQ=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=M/UXIXycg/+/us1v6xgCV1Ux7YnF3B1eSC+IjhHzB5B7ENqMpdnk1SNJErXMSsedP ence5bouNf1N7jC3J0ArGaT00jJ/gLOMqsZd16dDSWdQLjvhyTVQKDJdferi3E7Rtf yLnlxAJea9eB4ck+YghPzKfxlABti99W/HV+ZkwE= Received: from DFLE112.ent.ti.com (dfle112.ent.ti.com [10.64.6.33]) by lelv0265.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 05MIxQ9Q029795 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Mon, 22 Jun 2020 13:59:26 -0500 Received: from DFLE110.ent.ti.com (10.64.6.31) by DFLE112.ent.ti.com (10.64.6.33) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Mon, 22 Jun 2020 13:59:26 -0500 Received: from fllv0040.itg.ti.com (10.64.41.20) by DFLE110.ent.ti.com (10.64.6.31) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Mon, 22 Jun 2020 13:59:25 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by fllv0040.itg.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxP5P025102; Mon, 22 Jun 2020 13:59:25 -0500 From: Dan Murphy To: , , CC: , , , , Dan Murphy Subject: [PATCH v29 04/16] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers Date: Mon, 22 Jun 2020 13:59:07 -0500 Message-ID: <20200622185919.2131-5-dmurphy@ti.com> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200622185919.2131-1-dmurphy@ti.com> References: <20200622185919.2131-1-dmurphy@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-leds-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-leds@vger.kernel.org Introduce the bindings for the Texas Instruments LP5036, LP5030, LP5024, LP5018, LP5012 and LP5009 RGB LED device driver. The LP5036/30/24/18/12/9 can control RGB LEDs individually or as part of a control bank group. These devices have the ability to adjust the mixing control for the RGB LEDs to obtain different colors independent of the overall brightness of the LED grouping. Datasheet: http://www.ti.com/lit/ds/symlink/lp5012.pdf http://www.ti.com/lit/ds/symlink/lp5024.pdf http://www.ti.com/lit/ds/symlink/lp5036.pdf Acked-by: Jacek Anaszewski Signed-off-by: Dan Murphy --- .../devicetree/bindings/leds/leds-lp50xx.yaml | 130 ++++++++++++++++++ 1 file changed, 130 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/leds-lp50xx.yaml -- 2.26.2 Reviewed-by: Rob Herring diff --git a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml new file mode 100644 index 000000000000..de5225b54a45 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-lp50xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LED driver for LP50XX RGB LED from Texas Instruments. + +maintainers: + - Dan Murphy + +description: | + The LP50XX is multi-channel, I2C RGB LED Drivers that can group RGB LEDs into + a LED group or control them individually. + + The difference in these RGB LED drivers is the number of supported RGB + modules. + + For more product information please see the link below: + http://www.ti.com/lit/ds/symlink/lp5012.pdf + http://www.ti.com/lit/ds/symlink/lp5024.pdf + http://www.ti.com/lit/ds/symlink/lp5036.pdf + +properties: + compatible: + enum: + - ti,lp5009 + - ti,lp5012 + - ti,lp5018 + - ti,lp5024 + - ti,lp5030 + - ti,lp5036 + + reg: + maxItems: 1 + description: + I2C slave address + lp5009/12 - 0x14, 0x15, 0x16, 0x17 + lp5018/24 - 0x28, 0x29, 0x2a, 0x2b + lp5030/36 - 0x30, 0x31, 0x32, 0x33 + + enable-gpios: + maxItems: 1 + description: GPIO pin to enable/disable the device. + + vled-supply: + description: LED supply. + +patternProperties: + '^multi-led@[0-9a-f]$': + type: object + allOf: + - $ref: leds-class-multicolor.yaml# + properties: + reg: + minItems: 1 + maxItems: 12 + description: + This property denotes the LED module number(s) that is used on the + for the child node. The LED modules can either be used stand alone + or grouped into a module bank. + + patternProperties: + "(^led-[0-9a-f]$|led)": + type: object + $ref: common.yaml# + +required: + - compatible + - reg + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@14 { + compatible = "ti,lp5009"; + reg = <0x14>; + #address-cells = <1>; + #size-cells = <0>; + enable-gpios = <&gpio1 16>; + + multi-led@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + color = ; + function = LED_FUNCTION_CHARGING; + + led-0 { + color = ; + }; + + led-1 { + color = ; + }; + + led-2 { + color = ; + }; + }; + + multi-led@2 { + #address-cells = <1>; + #size-cells = <2>; + reg = <0x2 0x3 0x5>; + color = ; + function = LED_FUNCTION_STANDBY; + + led-6 { + color = ; + }; + + led-7 { + color = ; + }; + + led-8 { + color = ; + }; + }; + }; + }; + +... From patchwork Mon Jun 22 18:59:08 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dan Murphy X-Patchwork-Id: 191371 Delivered-To: patch@linaro.org Received: by 2002:a54:3249:0:0:0:0:0 with SMTP id g9csp422019ecs; Mon, 22 Jun 2020 11:59:48 -0700 (PDT) X-Google-Smtp-Source: ABdhPJzeHYDfFJM+Nr4I3+M42RpG2sqM9rkmQ23jRaR5v4koFPaF1kN4tZ3qZaXFjX3LlPDjtzsM X-Received: by 2002:a17:906:51d6:: with SMTP id v22mr11082738ejk.212.1592852388460; Mon, 22 Jun 2020 11:59:48 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1592852388; cv=none; d=google.com; s=arc-20160816; b=TFG+JMAVVDHOYmOLVRFigq6Pu2teq84ONRuoGPQZnA20zHXVuvuP01i6cIL+BGw53j 2Sl/nojAl9vYbo9pG9ljjrL/of10m+eaCSlcR/arP8L5r9nZEYwQA70yOA4v7GTQiJlT OS5CTfcayurePEeGlGtqZ+rUXnIlnHk6qqHSkvGVmUadpADT0F0uVugpznoGzmJToXNR wEnMiETWE0KzWgddWxIAeEn4Nl1fzw2pW8xygBbtVuS7jVGMraC9mZr2KcYnBVu+ZWJT wyXJ1pWx3QRh05CJ/ewxzT/d6ZNHa3ObvYHiqOpYVSUBZf9wLX3V088fGrEdkJcHWWCP 76+A== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=vLBzV++b4+M4I0p6CqSHjntQ5siBf0wJ+jvBFwJ4qjg=; b=LCiOiWebayC10Vm7eCtlje05Q+KbDLrGk7cs25j59BirMHUOK8HnUVlHSm2QkBI+rr 0zuOj0cqettuPjVDdHyyV6Tm9kwKoGZU3pp5HUf2KVnY6yNBrbjpL4qtvdc7QgnBLV10 w4YSKSBmwDyjb37GLl2zvlaEWmZYyTuHByHBnObxUi5c8Np4kKJ3khK4yDtlfwc8R3tT HJAwdaIzyMhumh5Re3ynvT7nybAeZv6rxFCQUiA0wNqCsScVxb/ry0h+AmmucD6UdeLn Coi/PeRaGRa+6RKVQDCxPanIGnVA6jky23Pibc4zeT5AG20UT+9CthjHy+C9FvlqLzP1 +usA== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b=k7+YPzoV; spf=pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-leds-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id t3si9376855edr.560.2020.06.22.11.59.48; Mon, 22 Jun 2020 11:59:48 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b=k7+YPzoV; spf=pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-leds-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730446AbgFVS7q (ORCPT + 1 other); Mon, 22 Jun 2020 14:59:46 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:42334 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730401AbgFVS7o (ORCPT ); Mon, 22 Jun 2020 14:59:44 -0400 Received: from lelv0265.itg.ti.com ([10.180.67.224]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxRXG024916; Mon, 22 Jun 2020 13:59:27 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1592852367; bh=vLBzV++b4+M4I0p6CqSHjntQ5siBf0wJ+jvBFwJ4qjg=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=k7+YPzoVRMNpkYnBJljolJtQoQEn9SBdxHMUV/vE5WSgyvUJ1i1R4Y/Xgi+YuRQof BbrYI4HLHHd7nmmCbnxLhZ3LdN3iTpn2SjdpyQnCopfyI1Ekr84SuKgJHRTMYLQwYZ I231BOLUII/58tKXmLcWd6ajXnGOBUb5rc1TaCF8= Received: from DLEE110.ent.ti.com (dlee110.ent.ti.com [157.170.170.21]) by lelv0265.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 05MIxR6W029799 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Mon, 22 Jun 2020 13:59:27 -0500 Received: from DLEE111.ent.ti.com (157.170.170.22) by DLEE110.ent.ti.com (157.170.170.21) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Mon, 22 Jun 2020 13:59:26 -0500 Received: from fllv0039.itg.ti.com (10.64.41.19) by DLEE111.ent.ti.com (157.170.170.22) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Mon, 22 Jun 2020 13:59:26 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by fllv0039.itg.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxQ9j078667; Mon, 22 Jun 2020 13:59:26 -0500 From: Dan Murphy To: , , CC: , , , , Dan Murphy Subject: [PATCH v29 05/16] leds: lp50xx: Add the LP50XX family of the RGB LED driver Date: Mon, 22 Jun 2020 13:59:08 -0500 Message-ID: <20200622185919.2131-6-dmurphy@ti.com> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200622185919.2131-1-dmurphy@ti.com> References: <20200622185919.2131-1-dmurphy@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-leds-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-leds@vger.kernel.org Introduce the LP5036/30/24/18/12/9 RGB LED driver. The difference in these parts are the number of LED outputs where the: LP5036 can control 36 LEDs LP5030 can control 30 LEDs LP5024 can control 24 LEDs LP5018 can control 18 LEDs LP5012 can control 12 LEDs LP5009 can control 9 LEDs The device has the ability to group LED output into control banks so that multiple LED banks can be controlled with the same mixing and brightness. Inversely the LEDs can also be controlled independently. Acked-by: Jacek Anaszewski Signed-off-by: Dan Murphy --- drivers/leds/Kconfig | 11 + drivers/leds/Makefile | 1 + drivers/leds/leds-lp50xx.c | 783 +++++++++++++++++++++++++++++++++++++ 3 files changed, 795 insertions(+) create mode 100644 drivers/leds/leds-lp50xx.c -- 2.26.2 diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 0d034453eeb9..68f63d1a7d48 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -384,6 +384,17 @@ config LEDS_LP3952 To compile this driver as a module, choose M here: the module will be called leds-lp3952. +config LEDS_LP50XX + tristate "LED Support for TI LP5036/30/24/18/12/9 LED driver chip" + depends on LEDS_CLASS && REGMAP_I2C + depends on LEDS_CLASS_MULTI_COLOR || !LEDS_CLASS_MULTI_COLOR + help + If you say yes here you get support for the Texas Instruments + LP5036, LP5030, LP5024, LP5018, LP5012 and LP5009 LED driver. + + To compile this driver as a module, choose M here: the + module will be called leds-lp50xx. + config LEDS_LP55XX_COMMON tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501" depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501 diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 53a752c32e67..68c05faec99e 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_LEDS_LM3697) += leds-lm3697.o obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o obj-$(CONFIG_LEDS_LP3952) += leds-lp3952.o +obj-$(CONFIG_LEDS_LP50XX) += leds-lp50xx.o obj-$(CONFIG_LEDS_LP5521) += leds-lp5521.o obj-$(CONFIG_LEDS_LP5523) += leds-lp5523.o obj-$(CONFIG_LEDS_LP5562) += leds-lp5562.o diff --git a/drivers/leds/leds-lp50xx.c b/drivers/leds/leds-lp50xx.c new file mode 100644 index 000000000000..407c2f42bac2 --- /dev/null +++ b/drivers/leds/leds-lp50xx.c @@ -0,0 +1,783 @@ +// SPDX-License-Identifier: GPL-2.0 +// TI LP50XX LED chip family driver +// Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "leds.h" + +#define LP50XX_DEV_CFG0 0x00 +#define LP50XX_DEV_CFG1 0x01 +#define LP50XX_LED_CFG0 0x02 + +/* LP5009 and LP5012 registers */ +#define LP5012_BNK_BRT 0x03 +#define LP5012_BNKA_CLR 0x04 +#define LP5012_BNKB_CLR 0x05 +#define LP5012_BNKC_CLR 0x06 +#define LP5012_LED0_BRT 0x07 +#define LP5012_LED1_BRT 0x08 +#define LP5012_LED2_BRT 0x09 +#define LP5012_LED3_BRT 0x0a +#define LP5012_OUT0_CLR 0x0b +#define LP5012_OUT1_CLR 0x0c +#define LP5012_OUT2_CLR 0x0d +#define LP5012_OUT3_CLR 0x0e +#define LP5012_OUT4_CLR 0x0f +#define LP5012_OUT5_CLR 0x10 +#define LP5012_OUT6_CLR 0x11 +#define LP5012_OUT7_CLR 0x12 +#define LP5012_OUT8_CLR 0x13 +#define LP5012_OUT9_CLR 0x14 +#define LP5012_OUT10_CLR 0x15 +#define LP5012_OUT11_CLR 0x16 +#define LP5012_RESET 0x17 + +/* LP5018 and LP5024 registers */ +#define LP5024_BNK_BRT 0x03 +#define LP5024_BNKA_CLR 0x04 +#define LP5024_BNKB_CLR 0x05 +#define LP5024_BNKC_CLR 0x06 +#define LP5024_LED0_BRT 0x07 +#define LP5024_LED1_BRT 0x08 +#define LP5024_LED2_BRT 0x09 +#define LP5024_LED3_BRT 0x0a +#define LP5024_LED4_BRT 0x0b +#define LP5024_LED5_BRT 0x0c +#define LP5024_LED6_BRT 0x0d +#define LP5024_LED7_BRT 0x0e + +#define LP5024_OUT0_CLR 0x0f +#define LP5024_OUT1_CLR 0x10 +#define LP5024_OUT2_CLR 0x11 +#define LP5024_OUT3_CLR 0x12 +#define LP5024_OUT4_CLR 0x13 +#define LP5024_OUT5_CLR 0x14 +#define LP5024_OUT6_CLR 0x15 +#define LP5024_OUT7_CLR 0x16 +#define LP5024_OUT8_CLR 0x17 +#define LP5024_OUT9_CLR 0x18 +#define LP5024_OUT10_CLR 0x19 +#define LP5024_OUT11_CLR 0x1a +#define LP5024_OUT12_CLR 0x1b +#define LP5024_OUT13_CLR 0x1c +#define LP5024_OUT14_CLR 0x1d +#define LP5024_OUT15_CLR 0x1e +#define LP5024_OUT16_CLR 0x1f +#define LP5024_OUT17_CLR 0x20 +#define LP5024_OUT18_CLR 0x21 +#define LP5024_OUT19_CLR 0x22 +#define LP5024_OUT20_CLR 0x23 +#define LP5024_OUT21_CLR 0x24 +#define LP5024_OUT22_CLR 0x25 +#define LP5024_OUT23_CLR 0x26 +#define LP5024_RESET 0x27 + +/* LP5030 and LP5036 registers */ +#define LP5036_LED_CFG1 0x03 +#define LP5036_BNK_BRT 0x04 +#define LP5036_BNKA_CLR 0x05 +#define LP5036_BNKB_CLR 0x06 +#define LP5036_BNKC_CLR 0x07 +#define LP5036_LED0_BRT 0x08 +#define LP5036_LED1_BRT 0x09 +#define LP5036_LED2_BRT 0x0a +#define LP5036_LED3_BRT 0x0b +#define LP5036_LED4_BRT 0x0c +#define LP5036_LED5_BRT 0x0d +#define LP5036_LED6_BRT 0x0e +#define LP5036_LED7_BRT 0x0f +#define LP5036_LED8_BRT 0x10 +#define LP5036_LED9_BRT 0x11 +#define LP5036_LED10_BRT 0x12 +#define LP5036_LED11_BRT 0x13 + +#define LP5036_OUT0_CLR 0x14 +#define LP5036_OUT1_CLR 0x15 +#define LP5036_OUT2_CLR 0x16 +#define LP5036_OUT3_CLR 0x17 +#define LP5036_OUT4_CLR 0x18 +#define LP5036_OUT5_CLR 0x19 +#define LP5036_OUT6_CLR 0x1a +#define LP5036_OUT7_CLR 0x1b +#define LP5036_OUT8_CLR 0x1c +#define LP5036_OUT9_CLR 0x1d +#define LP5036_OUT10_CLR 0x1e +#define LP5036_OUT11_CLR 0x1f +#define LP5036_OUT12_CLR 0x20 +#define LP5036_OUT13_CLR 0x21 +#define LP5036_OUT14_CLR 0x22 +#define LP5036_OUT15_CLR 0x23 +#define LP5036_OUT16_CLR 0x24 +#define LP5036_OUT17_CLR 0x25 +#define LP5036_OUT18_CLR 0x26 +#define LP5036_OUT19_CLR 0x27 +#define LP5036_OUT20_CLR 0x28 +#define LP5036_OUT21_CLR 0x29 +#define LP5036_OUT22_CLR 0x2a +#define LP5036_OUT23_CLR 0x2b +#define LP5036_OUT24_CLR 0x2c +#define LP5036_OUT25_CLR 0x2d +#define LP5036_OUT26_CLR 0x2e +#define LP5036_OUT27_CLR 0x2f +#define LP5036_OUT28_CLR 0x30 +#define LP5036_OUT29_CLR 0x31 +#define LP5036_OUT30_CLR 0x32 +#define LP5036_OUT31_CLR 0x33 +#define LP5036_OUT32_CLR 0x34 +#define LP5036_OUT33_CLR 0x35 +#define LP5036_OUT34_CLR 0x36 +#define LP5036_OUT35_CLR 0x37 +#define LP5036_RESET 0x38 + +#define LP50XX_SW_RESET 0xff +#define LP50XX_CHIP_EN BIT(6) + +/* There are 3 LED outputs per bank */ +#define LP50XX_LEDS_PER_MODULE 3 + +#define LP5009_MAX_LED_MODULES 2 +#define LP5012_MAX_LED_MODULES 4 +#define LP5018_MAX_LED_MODULES 6 +#define LP5024_MAX_LED_MODULES 8 +#define LP5030_MAX_LED_MODULES 10 +#define LP5036_MAX_LED_MODULES 12 + +#define LP5009_MAX_LEDS (LP5009_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE) +#define LP5012_MAX_LEDS (LP5012_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE) +#define LP5018_MAX_LEDS (LP5018_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE) +#define LP5024_MAX_LEDS (LP5024_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE) +#define LP5030_MAX_LEDS (LP5030_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE) +#define LP5036_MAX_LEDS (LP5036_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE) + +static const struct reg_default lp5012_reg_defs[] = { + {LP50XX_DEV_CFG0, 0x0}, + {LP50XX_DEV_CFG1, 0x3c}, + {LP50XX_LED_CFG0, 0x0}, + {LP5012_BNK_BRT, 0xff}, + {LP5012_BNKA_CLR, 0x0f}, + {LP5012_BNKB_CLR, 0x0f}, + {LP5012_BNKC_CLR, 0x0f}, + {LP5012_LED0_BRT, 0x0f}, + {LP5012_LED1_BRT, 0xff}, + {LP5012_LED2_BRT, 0xff}, + {LP5012_LED3_BRT, 0xff}, + {LP5012_OUT0_CLR, 0x0f}, + {LP5012_OUT1_CLR, 0x00}, + {LP5012_OUT2_CLR, 0x00}, + {LP5012_OUT3_CLR, 0x00}, + {LP5012_OUT4_CLR, 0x00}, + {LP5012_OUT5_CLR, 0x00}, + {LP5012_OUT6_CLR, 0x00}, + {LP5012_OUT7_CLR, 0x00}, + {LP5012_OUT8_CLR, 0x00}, + {LP5012_OUT9_CLR, 0x00}, + {LP5012_OUT10_CLR, 0x00}, + {LP5012_OUT11_CLR, 0x00}, + {LP5012_RESET, 0x00} +}; + +static const struct reg_default lp5024_reg_defs[] = { + {LP50XX_DEV_CFG0, 0x0}, + {LP50XX_DEV_CFG1, 0x3c}, + {LP50XX_LED_CFG0, 0x0}, + {LP5024_BNK_BRT, 0xff}, + {LP5024_BNKA_CLR, 0x0f}, + {LP5024_BNKB_CLR, 0x0f}, + {LP5024_BNKC_CLR, 0x0f}, + {LP5024_LED0_BRT, 0x0f}, + {LP5024_LED1_BRT, 0xff}, + {LP5024_LED2_BRT, 0xff}, + {LP5024_LED3_BRT, 0xff}, + {LP5024_LED4_BRT, 0xff}, + {LP5024_LED5_BRT, 0xff}, + {LP5024_LED6_BRT, 0xff}, + {LP5024_LED7_BRT, 0xff}, + {LP5024_OUT0_CLR, 0x0f}, + {LP5024_OUT1_CLR, 0x00}, + {LP5024_OUT2_CLR, 0x00}, + {LP5024_OUT3_CLR, 0x00}, + {LP5024_OUT4_CLR, 0x00}, + {LP5024_OUT5_CLR, 0x00}, + {LP5024_OUT6_CLR, 0x00}, + {LP5024_OUT7_CLR, 0x00}, + {LP5024_OUT8_CLR, 0x00}, + {LP5024_OUT9_CLR, 0x00}, + {LP5024_OUT10_CLR, 0x00}, + {LP5024_OUT11_CLR, 0x00}, + {LP5024_OUT12_CLR, 0x00}, + {LP5024_OUT13_CLR, 0x00}, + {LP5024_OUT14_CLR, 0x00}, + {LP5024_OUT15_CLR, 0x00}, + {LP5024_OUT16_CLR, 0x00}, + {LP5024_OUT17_CLR, 0x00}, + {LP5024_OUT18_CLR, 0x00}, + {LP5024_OUT19_CLR, 0x00}, + {LP5024_OUT20_CLR, 0x00}, + {LP5024_OUT21_CLR, 0x00}, + {LP5024_OUT22_CLR, 0x00}, + {LP5024_OUT23_CLR, 0x00}, + {LP5024_RESET, 0x00} +}; + +static const struct reg_default lp5036_reg_defs[] = { + {LP50XX_DEV_CFG0, 0x0}, + {LP50XX_DEV_CFG1, 0x3c}, + {LP50XX_LED_CFG0, 0x0}, + {LP5036_LED_CFG1, 0x0}, + {LP5036_BNK_BRT, 0xff}, + {LP5036_BNKA_CLR, 0x0f}, + {LP5036_BNKB_CLR, 0x0f}, + {LP5036_BNKC_CLR, 0x0f}, + {LP5036_LED0_BRT, 0x0f}, + {LP5036_LED1_BRT, 0xff}, + {LP5036_LED2_BRT, 0xff}, + {LP5036_LED3_BRT, 0xff}, + {LP5036_LED4_BRT, 0xff}, + {LP5036_LED5_BRT, 0xff}, + {LP5036_LED6_BRT, 0xff}, + {LP5036_LED7_BRT, 0xff}, + {LP5036_OUT0_CLR, 0x0f}, + {LP5036_OUT1_CLR, 0x00}, + {LP5036_OUT2_CLR, 0x00}, + {LP5036_OUT3_CLR, 0x00}, + {LP5036_OUT4_CLR, 0x00}, + {LP5036_OUT5_CLR, 0x00}, + {LP5036_OUT6_CLR, 0x00}, + {LP5036_OUT7_CLR, 0x00}, + {LP5036_OUT8_CLR, 0x00}, + {LP5036_OUT9_CLR, 0x00}, + {LP5036_OUT10_CLR, 0x00}, + {LP5036_OUT11_CLR, 0x00}, + {LP5036_OUT12_CLR, 0x00}, + {LP5036_OUT13_CLR, 0x00}, + {LP5036_OUT14_CLR, 0x00}, + {LP5036_OUT15_CLR, 0x00}, + {LP5036_OUT16_CLR, 0x00}, + {LP5036_OUT17_CLR, 0x00}, + {LP5036_OUT18_CLR, 0x00}, + {LP5036_OUT19_CLR, 0x00}, + {LP5036_OUT20_CLR, 0x00}, + {LP5036_OUT21_CLR, 0x00}, + {LP5036_OUT22_CLR, 0x00}, + {LP5036_OUT23_CLR, 0x00}, + {LP5036_OUT24_CLR, 0x00}, + {LP5036_OUT25_CLR, 0x00}, + {LP5036_OUT26_CLR, 0x00}, + {LP5036_OUT27_CLR, 0x00}, + {LP5036_OUT28_CLR, 0x00}, + {LP5036_OUT29_CLR, 0x00}, + {LP5036_OUT30_CLR, 0x00}, + {LP5036_OUT31_CLR, 0x00}, + {LP5036_OUT32_CLR, 0x00}, + {LP5036_OUT33_CLR, 0x00}, + {LP5036_OUT34_CLR, 0x00}, + {LP5036_OUT35_CLR, 0x00}, + {LP5036_RESET, 0x00} +}; + +static const struct regmap_config lp5012_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = LP5012_RESET, + .reg_defaults = lp5012_reg_defs, + .num_reg_defaults = ARRAY_SIZE(lp5012_reg_defs), + .cache_type = REGCACHE_RBTREE, +}; + +static const struct regmap_config lp5024_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = LP5024_RESET, + .reg_defaults = lp5024_reg_defs, + .num_reg_defaults = ARRAY_SIZE(lp5024_reg_defs), + .cache_type = REGCACHE_RBTREE, +}; + +static const struct regmap_config lp5036_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = LP5036_RESET, + .reg_defaults = lp5036_reg_defs, + .num_reg_defaults = ARRAY_SIZE(lp5036_reg_defs), + .cache_type = REGCACHE_RBTREE, +}; + +enum lp50xx_model { + LP5009, + LP5012, + LP5018, + LP5024, + LP5030, + LP5036, +}; + +/* + * struct lp50xx_chip_info - + * @num_leds: number of LED outputs available on the device + * @led_brightness0_reg: first brightness register of the device + * @mix_out0_reg: first color mix register of the device + * @bank_brt_reg: bank brightness register + * @bank_mix_reg: color mix register + * @reset_reg: device reset register + */ +struct lp50xx_chip_info { + const struct regmap_config *lp50xx_regmap_config; + int model_id; + u8 max_modules; + u8 num_leds; + u8 led_brightness0_reg; + u8 mix_out0_reg; + u8 bank_brt_reg; + u8 bank_mix_reg; + u8 reset_reg; +}; + +static const struct lp50xx_chip_info lp50xx_chip_info_tbl[] = { + [LP5009] = { + .model_id = LP5009, + .max_modules = LP5009_MAX_LED_MODULES, + .num_leds = LP5009_MAX_LEDS, + .led_brightness0_reg = LP5012_LED0_BRT, + .mix_out0_reg = LP5012_OUT0_CLR, + .bank_brt_reg = LP5012_BNK_BRT, + .bank_mix_reg = LP5012_BNKA_CLR, + .reset_reg = LP5012_RESET, + .lp50xx_regmap_config = &lp5012_regmap_config, + }, + [LP5012] = { + .model_id = LP5012, + .max_modules = LP5012_MAX_LED_MODULES, + .num_leds = LP5012_MAX_LEDS, + .led_brightness0_reg = LP5012_LED0_BRT, + .mix_out0_reg = LP5012_OUT0_CLR, + .bank_brt_reg = LP5012_BNK_BRT, + .bank_mix_reg = LP5012_BNKA_CLR, + .reset_reg = LP5012_RESET, + .lp50xx_regmap_config = &lp5012_regmap_config, + }, + [LP5018] = { + .model_id = LP5018, + .max_modules = LP5018_MAX_LED_MODULES, + .num_leds = LP5018_MAX_LEDS, + .led_brightness0_reg = LP5024_LED0_BRT, + .mix_out0_reg = LP5024_OUT0_CLR, + .bank_brt_reg = LP5024_BNK_BRT, + .bank_mix_reg = LP5024_BNKA_CLR, + .reset_reg = LP5024_RESET, + .lp50xx_regmap_config = &lp5024_regmap_config, + }, + [LP5024] = { + .model_id = LP5024, + .max_modules = LP5024_MAX_LED_MODULES, + .num_leds = LP5024_MAX_LEDS, + .led_brightness0_reg = LP5024_LED0_BRT, + .mix_out0_reg = LP5024_OUT0_CLR, + .bank_brt_reg = LP5024_BNK_BRT, + .bank_mix_reg = LP5024_BNKA_CLR, + .reset_reg = LP5024_RESET, + .lp50xx_regmap_config = &lp5024_regmap_config, + }, + [LP5030] = { + .model_id = LP5030, + .max_modules = LP5030_MAX_LED_MODULES, + .num_leds = LP5030_MAX_LEDS, + .led_brightness0_reg = LP5036_LED0_BRT, + .mix_out0_reg = LP5036_OUT0_CLR, + .bank_brt_reg = LP5036_BNK_BRT, + .bank_mix_reg = LP5036_BNKA_CLR, + .reset_reg = LP5036_RESET, + .lp50xx_regmap_config = &lp5036_regmap_config, + }, + [LP5036] = { + .model_id = LP5036, + .max_modules = LP5036_MAX_LED_MODULES, + .num_leds = LP5036_MAX_LEDS, + .led_brightness0_reg = LP5036_LED0_BRT, + .mix_out0_reg = LP5036_OUT0_CLR, + .bank_brt_reg = LP5036_BNK_BRT, + .bank_mix_reg = LP5036_BNKA_CLR, + .reset_reg = LP5036_RESET, + .lp50xx_regmap_config = &lp5036_regmap_config, + }, +}; + +struct lp50xx_led { + struct led_classdev led_dev; + struct led_classdev_mc mc_cdev; + struct lp50xx *priv; + unsigned long bank_modules; + int led_intensity[LP50XX_LEDS_PER_MODULE]; + u8 ctrl_bank_enabled; + int led_number; +}; + +/** + * struct lp50xx - + * @enable_gpio: hardware enable gpio + * @regulator: LED supply regulator pointer + * @client: pointer to the I2C client + * @regmap: device register map + * @dev: pointer to the devices device struct + * @lock: lock for reading/writing the device + * @chip_info: chip specific information (ie num_leds) + * @num_of_banked_leds: holds the number of banked LEDs + * @leds: array of LED strings + */ +struct lp50xx { + struct gpio_desc *enable_gpio; + struct regulator *regulator; + struct i2c_client *client; + struct regmap *regmap; + struct device *dev; + struct mutex lock; + const struct lp50xx_chip_info *chip_info; + int num_of_banked_leds; + + /* This needs to be at the end of the struct */ + struct lp50xx_led leds[]; +}; + +static struct lp50xx_led *mcled_cdev_to_led(struct led_classdev_mc *mc_cdev) +{ + return container_of(mc_cdev, struct lp50xx_led, mc_cdev); +} + +static int lp50xx_brightness_set(struct led_classdev *cdev, + enum led_brightness brightness) +{ + struct led_classdev_mc *mc_dev = lcdev_to_mccdev(cdev); + struct lp50xx_led *led = mcled_cdev_to_led(mc_dev); + const struct lp50xx_chip_info *led_chip = led->priv->chip_info; + u8 led_offset, reg_val; + int ret = 0; + int i; + + mutex_lock(&led->priv->lock); + if (led->ctrl_bank_enabled) + reg_val = led_chip->bank_brt_reg; + else + reg_val = led_chip->led_brightness0_reg + + led->led_number; + + ret = regmap_write(led->priv->regmap, reg_val, brightness); + if (ret) { + dev_err(&led->priv->client->dev, + "Cannot write brightness value %d\n", ret); + goto out; + } + + for (i = 0; i < led->mc_cdev.num_colors; i++) { + if (led->ctrl_bank_enabled) { + reg_val = led_chip->bank_mix_reg + i; + } else { + led_offset = (led->led_number * 3) + i; + reg_val = led_chip->mix_out0_reg + led_offset; + } + + ret = regmap_write(led->priv->regmap, reg_val, + mc_dev->subled_info[i].intensity); + if (ret) { + dev_err(&led->priv->client->dev, + "Cannot write intensity value %d\n", ret); + goto out; + } + } +out: + mutex_unlock(&led->priv->lock); + return ret; +} + +static int lp50xx_set_banks(struct lp50xx *priv, u32 led_banks[]) +{ + u8 led_config_lo, led_config_hi; + u32 bank_enable_mask = 0; + int ret; + int i; + + for (i = 0; i < priv->chip_info->max_modules; i++) { + if (led_banks[i]) + bank_enable_mask |= (1 << led_banks[i]); + } + + led_config_lo = (u8)(bank_enable_mask & 0xff); + led_config_hi = (u8)(bank_enable_mask >> 8) & 0xff; + + ret = regmap_write(priv->regmap, LP50XX_LED_CFG0, led_config_lo); + if (ret) + return ret; + + if (priv->chip_info->model_id >= LP5030) + ret = regmap_write(priv->regmap, LP5036_LED_CFG1, + led_config_hi); + + return ret; +} + +static int lp50xx_reset(struct lp50xx *priv) +{ + if (priv->enable_gpio) + return gpiod_direction_output(priv->enable_gpio, 1); + else + return regmap_write(priv->regmap, priv->chip_info->reset_reg, + LP50XX_SW_RESET); +} + +static int lp50xx_enable_disable(struct lp50xx *priv, u8 enable_disable) +{ + return regmap_write(priv->regmap, LP50XX_DEV_CFG0, enable_disable); +} + +static int lp50xx_probe_dt(struct lp50xx *priv) +{ + u32 led_banks[LP5036_MAX_LED_MODULES] = {0}; + struct fwnode_handle *child = NULL; + struct fwnode_handle *led_node = NULL; + struct led_init_data init_data = {}; + struct led_classdev *led_cdev; + struct mc_subled *mc_led_info; + struct lp50xx_led *led; + int num_colors; + u32 color_id; + int led_number; + size_t i = 0; + int ret = -EINVAL; + + priv->enable_gpio = devm_gpiod_get_optional(priv->dev, + "enable", GPIOD_OUT_LOW); + if (IS_ERR(priv->enable_gpio)) { + ret = PTR_ERR(priv->enable_gpio); + dev_err(&priv->client->dev, "Failed to get enable gpio: %d\n", + ret); + return ret; + } + + priv->regulator = devm_regulator_get(priv->dev, "vled"); + if (IS_ERR(priv->regulator)) + priv->regulator = NULL; + + device_for_each_child_node(priv->dev, child) { + led = &priv->leds[i]; + ret = fwnode_property_count_u32(child, "reg"); + if (ret < 0) { + dev_err(&priv->client->dev, + "reg property is invalid\n"); + return -EINVAL; + } + if (ret > 1) { + priv->num_of_banked_leds = ret; + if (priv->num_of_banked_leds > + priv->chip_info->max_modules) { + dev_err(&priv->client->dev, + "reg property is invalid\n"); + ret = -EINVAL; + fwnode_handle_put(child); + goto child_out; + } + + ret = fwnode_property_read_u32_array(child, + "reg", + led_banks, + ret); + if (ret) { + dev_err(&priv->client->dev, + "reg property is missing\n"); + fwnode_handle_put(child); + goto child_out; + } + + ret = lp50xx_set_banks(priv, led_banks); + if (ret) { + dev_err(&priv->client->dev, + "Cannot setup banked LEDs\n"); + fwnode_handle_put(child); + goto child_out; + } + led->ctrl_bank_enabled = 1; + + } else { + ret = fwnode_property_read_u32(child, "reg", + &led_number); + if (ret) { + dev_err(&priv->client->dev, + "led reg property missing\n"); + fwnode_handle_put(child); + goto child_out; + } + + if (led_number > priv->chip_info->num_leds) { + dev_err(&priv->client->dev, + "led-sources property is invalid\n"); + ret = -EINVAL; + fwnode_handle_put(child); + goto child_out; + } + + led->led_number = led_number; + } + + init_data.fwnode = child; + fwnode_property_read_string(child, "linux,default-trigger", + &led->led_dev.default_trigger); + num_colors = 0; + + /* There are only 3 LEDs per module otherwise they should be + * banked which also is presented as 3 LEDs + */ + mc_led_info = devm_kcalloc(priv->dev, LP50XX_LEDS_PER_MODULE, + sizeof(*mc_led_info), GFP_KERNEL); + if (!mc_led_info) + return -ENOMEM; + + fwnode_for_each_child_node(child, led_node) { + ret = fwnode_property_read_u32(led_node, "color", + &color_id); + if (ret) + dev_err(priv->dev, "Cannot read color\n"); + + mc_led_info[num_colors].color_index = color_id; + num_colors++; + } + + led->priv = priv; + led->mc_cdev.num_colors = num_colors; + led->mc_cdev.subled_info = mc_led_info; + led_cdev = &led->mc_cdev.led_cdev; + led_cdev->brightness_set_blocking = lp50xx_brightness_set; + ret = devm_led_classdev_multicolor_register_ext(&priv->client->dev, + &led->mc_cdev, + &init_data); + if (ret) { + dev_err(&priv->client->dev, "led register err: %d\n", + ret); + fwnode_handle_put(child); + goto child_out; + } + i++; + } + +child_out: + return ret; +} + +static int lp50xx_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lp50xx *led; + int count; + int ret; + + count = device_get_child_node_count(&client->dev); + if (!count) { + dev_err(&client->dev, "LEDs are not defined in device tree!"); + return -ENODEV; + } + + led = devm_kzalloc(&client->dev, struct_size(led, leds, count), + GFP_KERNEL); + if (!led) + return -ENOMEM; + + mutex_init(&led->lock); + led->client = client; + led->dev = &client->dev; + led->chip_info = &lp50xx_chip_info_tbl[id->driver_data]; + i2c_set_clientdata(client, led); + led->regmap = devm_regmap_init_i2c(client, + led->chip_info->lp50xx_regmap_config); + if (IS_ERR(led->regmap)) { + ret = PTR_ERR(led->regmap); + dev_err(&client->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + ret = lp50xx_reset(led); + if (ret) + return ret; + + ret = lp50xx_probe_dt(led); + if (ret) + return ret; + + return lp50xx_enable_disable(led, LP50XX_CHIP_EN); +} + +static int lp50xx_remove(struct i2c_client *client) +{ + struct lp50xx *led = i2c_get_clientdata(client); + int ret; + + ret = lp50xx_enable_disable(led, LP50XX_CHIP_EN); + if (ret) { + dev_err(&led->client->dev, "Failed to disable regulator\n"); + return ret; + } + + if (led->enable_gpio) + gpiod_direction_output(led->enable_gpio, 0); + + if (led->regulator) { + ret = regulator_disable(led->regulator); + if (ret) + dev_err(&led->client->dev, + "Failed to disable regulator\n"); + } + + mutex_destroy(&led->lock); + + return 0; +} + +static const struct i2c_device_id lp50xx_id[] = { + { "lp5009", LP5009 }, + { "lp5012", LP5012 }, + { "lp5018", LP5018 }, + { "lp5024", LP5024 }, + { "lp5030", LP5030 }, + { "lp5036", LP5036 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lp50xx_id); + +static const struct of_device_id of_lp50xx_leds_match[] = { + { .compatible = "ti,lp5009", .data = (void *)LP5009 }, + { .compatible = "ti,lp5012", .data = (void *)LP5012 }, + { .compatible = "ti,lp5018", .data = (void *)LP5018 }, + { .compatible = "ti,lp5024", .data = (void *)LP5024 }, + { .compatible = "ti,lp5030", .data = (void *)LP5030 }, + { .compatible = "ti,lp5036", .data = (void *)LP5036 }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_lp50xx_leds_match); + +static struct i2c_driver lp50xx_driver = { + .driver = { + .name = "lp50xx", + .of_match_table = of_lp50xx_leds_match, + }, + .probe = lp50xx_probe, + .remove = lp50xx_remove, + .id_table = lp50xx_id, +}; +module_i2c_driver(lp50xx_driver); + +MODULE_DESCRIPTION("Texas Instruments LP50XX LED driver"); +MODULE_AUTHOR("Dan Murphy "); +MODULE_LICENSE("GPL v2"); From patchwork Mon Jun 22 18:59:09 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dan Murphy X-Patchwork-Id: 191367 Delivered-To: patch@linaro.org Received: by 2002:a54:3249:0:0:0:0:0 with SMTP id g9csp421930ecs; Mon, 22 Jun 2020 11:59:41 -0700 (PDT) X-Google-Smtp-Source: ABdhPJxItR9OP0+Cf8BW5Ip952Y2jg306cF42xmyS7b31JpsTuaGFxFnw01SG2JEt95KiIRepD4E X-Received: by 2002:a17:906:51d6:: with SMTP id v22mr11082395ejk.212.1592852381827; Mon, 22 Jun 2020 11:59:41 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1592852381; cv=none; d=google.com; s=arc-20160816; b=nCnE7eU78ZMCzmoD9x1spaMYNMW2wOfsa792JDNc1x5HNliicY4JOyA5FVM+PFzcH0 Kc6rjwesvjtTPFu19r0sQuy6wiCF9Z/I2Z8hUxjNBKPBoMRUcy1pEICszIDZ0YXSxKmE fjELy1mddp03/pWijMxypS2kGMUSmVeSdwJ+iF8Yn6qK+xXhoqFY+CWTj2/f+0aPpiJi kT61UefYnl6hDbp6AQcd6gYuWSn49vTqO8zAdKiGvLVz7GTuzrR1pNNgCuD1f3K3ehJ5 23ycQjCkhrwL3+DooF/u3dnjyM/bUkruHo6koL1aye1dLJhLbEBqLgyGBODtoUm7vzET /6NA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=l5DBLATby1KM81lVYix9jAEvjwVv3jRRG9y+NT8lvMA=; b=wePM3MzWHkuR0bNf8kodlPP8gfzHBoMD5L0F967XT7x/aZ7/FHYe7jhjVP1c/s5f97 IrgJA7Klcty384tWmEg549PcRDXqUkYt2siN/vFTsKoeBwEPgvjpwJ02UWyoqJYd+OQP MOexDqfgrEp2jxv/ooFtsOzD34vnmF0FBEERiEa7kkypBOpqG+pR3C/43DMyWke4R9+K wgaSHHGGouC3CNHZ99wpuYuASmoqFLTf+/PJXddIXIdVR3F6aZMTaHtu421H7iyOZoj4 5qD+9HqMSQQzJVrC0tBl8ARJdiR6giv97BjYjn+kLQYf/P4whpQ8NFAaamSelLZqDyOG ldlg== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b="SWyHG/rb"; spf=pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-leds-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id t3si9376855edr.560.2020.06.22.11.59.41; Mon, 22 Jun 2020 11:59:41 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b="SWyHG/rb"; spf=pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-leds-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730381AbgFVS7k (ORCPT + 1 other); Mon, 22 Jun 2020 14:59:40 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:42318 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730356AbgFVS7j (ORCPT ); Mon, 22 Jun 2020 14:59:39 -0400 Received: from fllv0034.itg.ti.com ([10.64.40.246]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxSuo024921; Mon, 22 Jun 2020 13:59:28 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1592852368; bh=l5DBLATby1KM81lVYix9jAEvjwVv3jRRG9y+NT8lvMA=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=SWyHG/rbXEqiH8nB01MUIsKNHKcpsc/lvQPnjKZfxfm6m7B0do4x9jSNOd1MbiD9D q9UEgU7OqE/wEx1Jnz/UypPIoaJ9lbs0VMLvEQC8YzsegHNQdaxb5DsJFw9Qlltu3Q eS/V2cFxLCUwU7nzU70dtvjcWfI403bHlE23ywjI= Received: from DLEE108.ent.ti.com (dlee108.ent.ti.com [157.170.170.38]) by fllv0034.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 05MIxS3O038043 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Mon, 22 Jun 2020 13:59:28 -0500 Received: from DLEE104.ent.ti.com (157.170.170.34) by DLEE108.ent.ti.com (157.170.170.38) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Mon, 22 Jun 2020 13:59:27 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DLEE104.ent.ti.com (157.170.170.34) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Mon, 22 Jun 2020 13:59:27 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxReA088083; Mon, 22 Jun 2020 13:59:27 -0500 From: Dan Murphy To: , , CC: , , , , Dan Murphy Subject: [PATCH v29 06/16] dt-bindings: leds: Convert leds-lp55xx to yaml Date: Mon, 22 Jun 2020 13:59:09 -0500 Message-ID: <20200622185919.2131-7-dmurphy@ti.com> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200622185919.2131-1-dmurphy@ti.com> References: <20200622185919.2131-1-dmurphy@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-leds-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-leds@vger.kernel.org Convert the leds-lp55xx.txt to yaml binding. Signed-off-by: Dan Murphy --- .../devicetree/bindings/leds/leds-lp55xx.txt | 228 ------------------ .../devicetree/bindings/leds/leds-lp55xx.yaml | 220 +++++++++++++++++ 2 files changed, 220 insertions(+), 228 deletions(-) delete mode 100644 Documentation/devicetree/bindings/leds/leds-lp55xx.txt create mode 100644 Documentation/devicetree/bindings/leds/leds-lp55xx.yaml -- 2.26.2 Reviewed-by: Rob Herring diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt deleted file mode 100644 index 1b66a413fb9d..000000000000 --- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt +++ /dev/null @@ -1,228 +0,0 @@ -Binding for TI/National Semiconductor LP55xx Led Drivers - -Required properties: -- compatible: one of - national,lp5521 - national,lp5523 - ti,lp55231 - ti,lp5562 - ti,lp8501 - -- reg: I2C slave address -- clock-mode: Input clock mode, (0: automode, 1: internal, 2: external) - -Each child has own specific current settings -- led-cur: Current setting at each led channel (mA x10, 0 if led is not connected) -- max-cur: Maximun current at each led channel. - -Optional properties: -- enable-gpio: GPIO attached to the chip's enable pin -- label: Used for naming LEDs -- pwr-sel: LP8501 specific property. Power selection for output channels. - 0: D1~9 are connected to VDD - 1: D1~6 with VDD, D7~9 with VOUT - 2: D1~6 with VOUT, D7~9 with VDD - 3: D1~9 are connected to VOUT - -Alternatively, each child can have a specific channel name and trigger: -- chan-name (optional): name of channel -- linux,default-trigger (optional): see - Documentation/devicetree/bindings/leds/common.txt - -example 1) LP5521 -3 LED channels, external clock used. Channel names are 'lp5521_pri:channel0', -'lp5521_pri:channel1' and 'lp5521_pri:channel2', with a heartbeat trigger -on channel 0. - -lp5521@32 { - compatible = "national,lp5521"; - reg = <0x32>; - label = "lp5521_pri"; - clock-mode = /bits/ 8 <2>; - - chan0 { - led-cur = /bits/ 8 <0x2f>; - max-cur = /bits/ 8 <0x5f>; - linux,default-trigger = "heartbeat"; - }; - - chan1 { - led-cur = /bits/ 8 <0x2f>; - max-cur = /bits/ 8 <0x5f>; - }; - - chan2 { - led-cur = /bits/ 8 <0x2f>; - max-cur = /bits/ 8 <0x5f>; - }; -}; - -example 2) LP5523 -9 LED channels with specific name. Internal clock used. -The I2C slave address is configurable with ASEL1 and ASEL0 pins. -Available addresses are 32/33/34/35h. - -ASEL1 ASEL0 Address -------------------------- - GND GND 32h - GND VEN 33h - VEN GND 34h - VEN VEN 35h - -lp5523@32 { - compatible = "national,lp5523"; - reg = <0x32>; - clock-mode = /bits/ 8 <1>; - - chan0 { - chan-name = "d1"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan1 { - chan-name = "d2"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan2 { - chan-name = "d3"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan3 { - chan-name = "d4"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan4 { - chan-name = "d5"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan5 { - chan-name = "d6"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan6 { - chan-name = "d7"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan7 { - chan-name = "d8"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan8 { - chan-name = "d9"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; -}; - -example 3) LP5562 -4 channels are defined. - -lp5562@30 { - compatible = "ti,lp5562"; - reg = <0x30>; - clock-mode = /bits/8 <2>; - - chan0 { - chan-name = "R"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - }; - - chan1 { - chan-name = "G"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - }; - - chan2 { - chan-name = "B"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - }; - - chan3 { - chan-name = "W"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - }; -}; - -example 4) LP8501 -9 channels are defined. The 'pwr-sel' is LP8501 specific property. -Others are same as LP5523. - -lp8501@32 { - compatible = "ti,lp8501"; - reg = <0x32>; - clock-mode = /bits/ 8 <2>; - pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */ - - chan0 { - chan-name = "d1"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan1 { - chan-name = "d2"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan2 { - chan-name = "d3"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan3 { - chan-name = "d4"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan4 { - chan-name = "d5"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan5 { - chan-name = "d6"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan6 { - chan-name = "d7"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan7 { - chan-name = "d8"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; - - chan8 { - chan-name = "d9"; - led-cur = /bits/ 8 <0x14>; - max-cur = /bits/ 8 <0x20>; - }; -}; diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml new file mode 100644 index 000000000000..b1bb3feb0f4d --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml @@ -0,0 +1,220 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-lp55xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI/National Semiconductor LP55xx and LP8501 LED Drivers + +maintainers: + - Jacek Anaszewski + - Pavel Machek + +description: | + Bindings for the TI/National Semiconductor LP55xx and LP8501 multi channel + LED Drivers. + + For more product information please see the link below: + https://www.ti.com/lit/gpn/lp5521 + https://www.ti.com/lit/gpn/lp5523 + https://www.ti.com/lit/gpn/lp55231 + https://www.ti.com/lit/gpn/lp5562 + https://www.ti.com/lit/gpn/lp8501 + +properties: + compatible: + enum: + - national,lp5521 + - national,lp5523 + - ti,lp55231 + - ti,lp5562 + - ti,lp8501 + + reg: + maxItems: 1 + description: I2C slave address + + clock-mode: + $ref: /schemas/types.yaml#definitions/uint8 + description: | + Input clock mode + enum: + - 0 # automode + - 1 # internal + - 2 # external + + enable-gpio: + maxItems: 1 + description: | + GPIO attached to the chip's enable pin + + pwr-sel: + $ref: /schemas/types.yaml#definitions/uint8 + description: | + LP8501 specific property. Power selection for output channels. + enum: + - 0 # D1~9 are connected to VDD + - 1 # D1~6 with VDD, D7~9 with VOUT + - 2 # D1~6 with VOUT, D7~9 with VDD + - 3 # D1~9 are connected to VOUT + +patternProperties: + "(^led@[0-9a-f]$|led)": + type: object + $ref: common.yaml# + properties: + led-cur: + $ref: /schemas/types.yaml#definitions/uint8 + description: | + Current setting at each LED channel (mA x10, 0 if LED is not connected) + minimum: 0 + maximum: 255 + + max-cur: + $ref: /schemas/types.yaml#definitions/uint8 + description: Maximun current at each LED channel. + + reg: + description: | + Output channel for the LED. This is zero based channel identifier and + the data sheet is a one based channel identifier. + reg value to output to LED output number + enum: + - 0 # LED output D1 + - 1 # LED output D2 + - 2 # LED output D3 + - 3 # LED output D4 + - 4 # LED output D5 + - 5 # LED output D6 + - 6 # LED output D7 + - 7 # LED output D8 + - 8 # LED output D9 + + chan-name: + $ref: /schemas/types.yaml#definitions/string + description: name of channel + +required: + - compatible + - reg + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@32 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,lp8501"; + reg = <0x32>; + clock-mode = /bits/ 8 <2>; + pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */ + + led@0 { + reg = <0>; + chan-name = "d1"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + led@1 { + reg = <1>; + chan-name = "d2"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + led@2 { + reg = <2>; + chan-name = "d3"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + led@3 { + reg = <3>; + chan-name = "d4"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + led@4 { + reg = <4>; + chan-name = "d5"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + led@5 { + reg = <5>; + chan-name = "d6"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + led@6 { + reg = <6>; + chan-name = "d7"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + led@7 { + reg = <7>; + chan-name = "d8"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + led@8 { + reg = <8>; + chan-name = "d9"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + }; + + led-controller@33 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "national,lp5523"; + reg = <0x33>; + clock-mode = /bits/ 8 <0>; + + multi-led@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + color = ; + function = LED_FUNCTION_STANDBY; + linux,default-trigger = "heartbeat"; + + led@0 { + led-cur = /bits/ 8 <50>; + max-cur = /bits/ 8 <100>; + reg = <0x0>; + color = ; + }; + + led@1 { + led-cur = /bits/ 8 <50>; + max-cur = /bits/ 8 <100>; + reg = <0x1>; + color = ; + }; + + led@6 { + led-cur = /bits/ 8 <50>; + max-cur = /bits/ 8 <100>; + reg = <0x6>; + color = ; + }; + }; + }; + }; + +... From patchwork Mon Jun 22 18:59:10 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Dan Murphy X-Patchwork-Id: 191369 Delivered-To: patch@linaro.org Received: by 2002:a54:3249:0:0:0:0:0 with SMTP id g9csp421967ecs; Mon, 22 Jun 2020 11:59:44 -0700 (PDT) X-Google-Smtp-Source: ABdhPJw0m4sjFhTPZr8fox9P1BwgwmUCxSfF30yp51t5gXYt66NktJmrKdMUZwS2OgddjO2cNf1g X-Received: by 2002:a50:fc0d:: with SMTP id i13mr18123808edr.260.1592852384646; Mon, 22 Jun 2020 11:59:44 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1592852384; cv=none; d=google.com; s=arc-20160816; b=zRbRQEYJsksbb3A+zzkv9xiPGQ0LCMzm5ND/IQKCzp4q3/Z/uj9suLk2w8DgRz9WYR 887kuEEbrX1QZK8k/oeKBHOdlYXOi1ZnJJW7KWKlsLn0zwE2QaUSDEyi6L7lxqh22yM4 8PSBs8xzeTzJoiHVL1Zabh9/q5hmVQkRmu+CLT3czjbXchecc1NPEtgsGmzCtmjxzWeH MfR9TKAhf/9DRqMUCNH5dEewl89E39a5NAFPGQIbPli9EiSYkOFnckgjZ9+JrzgIO4i8 aIzmgaLzqgBjDvlSqnDC+79X+3Rw/KzR7fU5Cc15hqNM4Q1I3sO2FzLPH9JURbC6ImsN onAg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=8IVrLn2oGajwW9HenWpKeQ4KhS7i7iRwTrL7dy0Erd8=; b=mObHF0p2IN1MXbwWpCT6v8TZY9MswrDQj+oH5JAl1+fzB4kj2c1/zeKIbNQmdvQMr0 e9btPGzOFab75pvYAaKJfaIlxsLRYjhjbuiUR4PuR7v275rd0EzY6SyyMl1kZhoINm8o zI00Gmbg2Au2ipfwXeM0AYs0Q33QUc+ZiReqYRfrK5dopybNcfAZnh4aBK3xSXsrSz9f geVLaMaIZdKUe/270nvKxd0NCekdtiX1kcWRtnCjTlEyveru6kWhkGrCnJKfX/wG9ZL1 kge1lskXVe0xSAyfL3nmDo7R9HvXPEZK3F8nCQJdqX+HBA0EQ0GTiMjaV3qs/G6cabpy HzYQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b=wgyoJuOC; spf=pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-leds-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id t3si9376855edr.560.2020.06.22.11.59.44; Mon, 22 Jun 2020 11:59:44 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b=wgyoJuOC; spf=pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-leds-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730407AbgFVS7n (ORCPT + 1 other); Mon, 22 Jun 2020 14:59:43 -0400 Received: from fllv0016.ext.ti.com ([198.47.19.142]:60932 "EHLO fllv0016.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730384AbgFVS7l (ORCPT ); Mon, 22 Jun 2020 14:59:41 -0400 Received: from fllv0035.itg.ti.com ([10.64.41.0]) by fllv0016.ext.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxSUV053502; Mon, 22 Jun 2020 13:59:28 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1592852368; bh=8IVrLn2oGajwW9HenWpKeQ4KhS7i7iRwTrL7dy0Erd8=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=wgyoJuOCcg3kzz4B5PmLkUW/zX+WsoJkFoCWVbwCn4RZyYAxD7DkqnVcFgoMl8+bL WWQxgDxmTNSXtAPWrKnu/AImjItqWMDVR1vd2vHn3kBo2Zl9gHFk0SWBTi/+hAM9li WLV7he37fMDhjBY7kiwNPPu3zpQ6FQCykvW43hnQ= Received: from DLEE108.ent.ti.com (dlee108.ent.ti.com [157.170.170.38]) by fllv0035.itg.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxSkw096029; Mon, 22 Jun 2020 13:59:28 -0500 Received: from DLEE100.ent.ti.com (157.170.170.30) by DLEE108.ent.ti.com (157.170.170.38) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Mon, 22 Jun 2020 13:59:28 -0500 Received: from fllv0039.itg.ti.com (10.64.41.19) by DLEE100.ent.ti.com (157.170.170.30) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Mon, 22 Jun 2020 13:59:28 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by fllv0039.itg.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxR1d078691; Mon, 22 Jun 2020 13:59:28 -0500 From: Dan Murphy To: , , CC: , , , , Dan Murphy , Tony Lindgren , =?utf-8?q?Beno=C3=AEt_Cousson?= Subject: [PATCH v29 07/16] ARM: dts: n900: Add reg property to the LP5523 channel node Date: Mon, 22 Jun 2020 13:59:10 -0500 Message-ID: <20200622185919.2131-8-dmurphy@ti.com> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200622185919.2131-1-dmurphy@ti.com> References: <20200622185919.2131-1-dmurphy@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-leds-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-leds@vger.kernel.org Add the reg property to each channel node. This update is to accommodate the multicolor framework. In addition to the accommodation this allows the LEDs to be placed on any channel and allow designs to skip channels as opposed to requiring sequential order. Signed-off-by: Dan Murphy Acked-by: Tony Lindgren CC: Tony Lindgren CC: "Benoît Cousson" Acked-by: Pavel Machek --- arch/arm/boot/dts/omap3-n900.dts | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-) -- 2.26.2 diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 4089d97405c9..ebe93b06b4f7 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -618,63 +618,74 @@ indicator { }; lp5523: lp5523@32 { + #address-cells = <1>; + #size-cells = <0>; compatible = "national,lp5523"; reg = <0x32>; clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */ - chan0 { + chan@0 { chan-name = "lp5523:kb1"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <0>; }; - chan1 { + chan@1 { chan-name = "lp5523:kb2"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <1>; }; - chan2 { + chan@2 { chan-name = "lp5523:kb3"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <2>; }; - chan3 { + chan@3 { chan-name = "lp5523:kb4"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <3>; }; - chan4 { + chan@4 { chan-name = "lp5523:b"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <4>; }; - chan5 { + chan@5 { chan-name = "lp5523:g"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <5>; }; - chan6 { + chan@6 { chan-name = "lp5523:r"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <6>; }; - chan7 { + chan@7 { chan-name = "lp5523:kb5"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <7>; }; - chan8 { + chan@8 { chan-name = "lp5523:kb6"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <8>; }; }; From patchwork Mon Jun 22 18:59:12 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dan Murphy X-Patchwork-Id: 191373 Delivered-To: patch@linaro.org Received: by 2002:a54:3249:0:0:0:0:0 with SMTP id g9csp422340ecs; Mon, 22 Jun 2020 12:00:17 -0700 (PDT) X-Google-Smtp-Source: ABdhPJxmM1hLY65Vjht/MZ2vzJQ2AtyLt6R7RFbHB8BieAVUr9Q7L5RXzvk8wd6MMxw5IQ+jfPDu X-Received: by 2002:a50:ce45:: with SMTP id k5mr18776968edj.80.1592852416912; Mon, 22 Jun 2020 12:00:16 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1592852416; cv=none; d=google.com; s=arc-20160816; b=VKrqIAbRSNCOTPrmQoCf7oCimyeDX9tqDQJeehMaBDBNlWZXD/xu+/RMd0WrOvfEPX 2jHlxZQ4t4K+9DWmT8eTO3m+EZWfPw1OJTAjnJnNf7bbYQV+DT4fxp/XS5hFFv/9bIoP ZgcM7Ax56R9o3lR6ICKDNcl4ed3pSNB20IvYAcVSCrxSeP8n/sFTtwAN2Y8Ky0M2yLij 11pNL+teSdeap0aM7SCNCU4lCtF8PRYFGTWMpQBZQQahV2pjf4eLomCBFGT6kuoVSovv yv89MyR1T6FEXYRiP96x8JI9IqawWMIgKide9akaK/4iS99KvMReRQmrGLv1nwmNBD7h +CSw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=6kv4oPPzDnEU5/icPEIdws3eUefH8b8hua+2r+1UQCA=; b=oC/BVSITu67go1dR8Q5H2Zcbga3jFMbM/zDvl8bzkppTM8GHCSe34Uy8/iqvFfo/7j auK89REcIClNCxW2nxKzaRx7b/Il3CijfR5wq+u/23YhUCXPiy4Hc/bi4z/zx1mhrcPU fH3N3GwotMN10pXeEn6aj6U8fJSWTLp/TmZu0Bu2+4Fnxve96V4qZki20wUR+6Tmix3i wiB+6BXppcIpBkKeAWmXOVbGHlbiYkRgecBFb8F/nYSnlehfiyew0zQBMD+Vb4GqiuNb 44JzQxfinnyCpmJSswZsoH4dv053BUie04CWJLtHKR4rfgFum9JhH1Ynzs1gPVyr4+w7 gfdg== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b=lZXmcMdA; spf=pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-leds-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id z13si1244664edr.106.2020.06.22.12.00.16; Mon, 22 Jun 2020 12:00:16 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b=lZXmcMdA; spf=pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-leds-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730416AbgFVS7v (ORCPT + 1 other); Mon, 22 Jun 2020 14:59:51 -0400 Received: from lelv0142.ext.ti.com ([198.47.23.249]:51954 "EHLO lelv0142.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730470AbgFVS7u (ORCPT ); Mon, 22 Jun 2020 14:59:50 -0400 Received: from fllv0035.itg.ti.com ([10.64.41.0]) by lelv0142.ext.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxU7P067317; Mon, 22 Jun 2020 13:59:30 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1592852370; bh=6kv4oPPzDnEU5/icPEIdws3eUefH8b8hua+2r+1UQCA=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=lZXmcMdAhjtr7QYJei47fyL3PB2eDHl68cGOs9WurVMNL9uU5vDnp1WYqUnLwUAne M/MjW820GZuhqBn7ckaHYs4AG/IRrBp50kr/PyKBhwpLtOptGVg26BMCJ0K40C10aP Qe+QZB2TQc8BMEhknGCwJFSDLSycEpMiUSjzm1DY= Received: from DFLE115.ent.ti.com (dfle115.ent.ti.com [10.64.6.36]) by fllv0035.itg.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxUxc096042; Mon, 22 Jun 2020 13:59:30 -0500 Received: from DFLE114.ent.ti.com (10.64.6.35) by DFLE115.ent.ti.com (10.64.6.36) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Mon, 22 Jun 2020 13:59:29 -0500 Received: from fllv0040.itg.ti.com (10.64.41.20) by DFLE114.ent.ti.com (10.64.6.35) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Mon, 22 Jun 2020 13:59:29 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by fllv0040.itg.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxTcJ025144; Mon, 22 Jun 2020 13:59:29 -0500 From: Dan Murphy To: , , CC: , , , , Dan Murphy , Linus Walleij Subject: [PATCH v29 09/16] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes Date: Mon, 22 Jun 2020 13:59:12 -0500 Message-ID: <20200622185919.2131-10-dmurphy@ti.com> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200622185919.2131-1-dmurphy@ti.com> References: <20200622185919.2131-1-dmurphy@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-leds-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-leds@vger.kernel.org Add the reg property to each channel node. This update is to accommodate the multicolor framework. In addition to the accommodation this allows the LEDs to be placed on any channel and allow designs to skip channels as opposed to requiring sequential order. Signed-off-by: Dan Murphy CC: Linus Walleij Acked-by: Pavel Machek --- arch/arm/boot/dts/ste-href.dtsi | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) -- 2.26.2 diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 33e3b0b3c53d..ff47cbf6ed3b 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -58,16 +58,21 @@ lp5521@33 { reg = <0x33>; label = "lp5521_pri"; clock-mode = /bits/ 8 <2>; - chan0 { + #address-cells = <1>; + #size-cells = <0>; + chan@0 { + reg = <0>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; linux,default-trigger = "heartbeat"; }; - chan1 { + chan@1 { + reg = <1>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; - chan2 { + chan@2 { + reg = <2>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; @@ -77,15 +82,20 @@ lp5521@34 { reg = <0x34>; label = "lp5521_sec"; clock-mode = /bits/ 8 <2>; - chan0 { + #address-cells = <1>; + #size-cells = <0>; + chan@0 { + reg = <0>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; - chan1 { + chan@1 { + reg = <1>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; - chan2 { + chan@2 { + reg = <2>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; From patchwork Mon Jun 22 18:59:14 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dan Murphy X-Patchwork-Id: 208993 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-10.1 required=3.0 tests=DKIMWL_WL_HIGH, DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH, MAILING_LIST_MULTI, SIGNED_OFF_BY, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 214FDC433E0 for ; Mon, 22 Jun 2020 19:00:39 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id E7BBF20706 for ; Mon, 22 Jun 2020 19:00:38 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=ti.com header.i=@ti.com header.b="ovVBu+Z+" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730564AbgFVTA1 (ORCPT ); Mon, 22 Jun 2020 15:00:27 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:42332 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730399AbgFVS7o (ORCPT ); Mon, 22 Jun 2020 14:59:44 -0400 Received: from lelv0265.itg.ti.com ([10.180.67.224]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxUxq024943; Mon, 22 Jun 2020 13:59:30 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1592852370; bh=FeTuyXPPC6z12scH6VuTDPYCZt5+YXp4eyqSFxUstkw=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=ovVBu+Z+943O2mpB98jpGu22vL81FRjcgQrGkzjF2THuh1RaiY0H5tVBaQ6ruZbQ1 JieV9sM86AAJKlijIYOxCvR2Paz5cC3AWXvJ+iwdEtA1VTADmVOlaougWCfJ0gEUYA b16HytrQvfzWZLfx0IqCfMDRvaRRDDLRf4nVPoyM= Received: from DFLE112.ent.ti.com (dfle112.ent.ti.com [10.64.6.33]) by lelv0265.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 05MIxUhF029857 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Mon, 22 Jun 2020 13:59:30 -0500 Received: from DFLE111.ent.ti.com (10.64.6.32) by DFLE112.ent.ti.com (10.64.6.33) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Mon, 22 Jun 2020 13:59:30 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DFLE111.ent.ti.com (10.64.6.32) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Mon, 22 Jun 2020 13:59:30 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxU1Z088129; Mon, 22 Jun 2020 13:59:30 -0500 From: Dan Murphy To: , , CC: , , , , Dan Murphy Subject: [PATCH v29 11/16] leds: lp55xx: Add multicolor framework support to lp55xx Date: Mon, 22 Jun 2020 13:59:14 -0500 Message-ID: <20200622185919.2131-12-dmurphy@ti.com> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200622185919.2131-1-dmurphy@ti.com> References: <20200622185919.2131-1-dmurphy@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-leds-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-leds@vger.kernel.org Add multicolor framework support for the lp55xx family. Acked-by: Pavel Machek Acked-by: Jacek Anaszewski Signed-off-by: Dan Murphy --- drivers/leds/Kconfig | 11 +- drivers/leds/leds-lp5521.c | 14 +- drivers/leds/leds-lp5523.c | 14 +- drivers/leds/leds-lp5562.c | 13 +- drivers/leds/leds-lp55xx-common.c | 177 +++++++++++++++++++--- drivers/leds/leds-lp55xx-common.h | 14 +- drivers/leds/leds-lp8501.c | 14 +- include/linux/platform_data/leds-lp55xx.h | 8 + 8 files changed, 213 insertions(+), 52 deletions(-) diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 68f63d1a7d48..f23f2edc81e7 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -397,7 +397,8 @@ config LEDS_LP50XX config LEDS_LP55XX_COMMON tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501" - depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501 + depends on LEDS_CLASS_MULTI_COLOR || !LEDS_CLASS_MULTI_COLOR + depends on OF select FW_LOADER select FW_LOADER_USER_HELPER help @@ -407,7 +408,7 @@ config LEDS_LP55XX_COMMON config LEDS_LP5521 tristate "LED Support for N.S. LP5521 LED driver chip" depends on LEDS_CLASS && I2C - select LEDS_LP55XX_COMMON + depends on LEDS_LP55XX_COMMON help If you say yes here you get support for the National Semiconductor LP5521 LED driver. It is 3 channel chip with programmable engines. @@ -417,7 +418,7 @@ config LEDS_LP5521 config LEDS_LP5523 tristate "LED Support for TI/National LP5523/55231 LED driver chip" depends on LEDS_CLASS && I2C - select LEDS_LP55XX_COMMON + depends on LEDS_LP55XX_COMMON help If you say yes here you get support for TI/National Semiconductor LP5523/55231 LED driver. @@ -428,7 +429,7 @@ config LEDS_LP5523 config LEDS_LP5562 tristate "LED Support for TI LP5562 LED driver chip" depends on LEDS_CLASS && I2C - select LEDS_LP55XX_COMMON + depends on LEDS_LP55XX_COMMON help If you say yes here you get support for TI LP5562 LED driver. It is 4 channels chip with programmable engines. @@ -438,7 +439,7 @@ config LEDS_LP5562 config LEDS_LP8501 tristate "LED Support for TI LP8501 LED driver chip" depends on LEDS_CLASS && I2C - select LEDS_LP55XX_COMMON + depends on LEDS_LP55XX_COMMON help If you say yes here you get support for TI LP8501 LED driver. It is 9 channel chip with programmable engines. diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c index 6d2163c0f625..6ff81d6be789 100644 --- a/drivers/leds/leds-lp5521.c +++ b/drivers/leds/leds-lp5521.c @@ -505,9 +505,16 @@ static int lp5521_probe(struct i2c_client *client, struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev); struct device_node *np = client->dev.of_node; + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->cfg = &lp5521_cfg; + if (!pdata) { if (np) { - pdata = lp55xx_of_populate_pdata(&client->dev, np); + pdata = lp55xx_of_populate_pdata(&client->dev, np, + chip); if (IS_ERR(pdata)) return PTR_ERR(pdata); } else { @@ -516,10 +523,6 @@ static int lp5521_probe(struct i2c_client *client, } } - chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); - if (!chip) - return -ENOMEM; - led = devm_kcalloc(&client->dev, pdata->num_channels, sizeof(*led), GFP_KERNEL); if (!led) @@ -527,7 +530,6 @@ static int lp5521_probe(struct i2c_client *client, chip->cl = client; chip->pdata = pdata; - chip->cfg = &lp5521_cfg; mutex_init(&chip->lock); diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c index 15e7051392f5..b076c16df9ab 100644 --- a/drivers/leds/leds-lp5523.c +++ b/drivers/leds/leds-lp5523.c @@ -872,9 +872,16 @@ static int lp5523_probe(struct i2c_client *client, struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev); struct device_node *np = client->dev.of_node; + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->cfg = &lp5523_cfg; + if (!pdata) { if (np) { - pdata = lp55xx_of_populate_pdata(&client->dev, np); + pdata = lp55xx_of_populate_pdata(&client->dev, np, + chip); if (IS_ERR(pdata)) return PTR_ERR(pdata); } else { @@ -883,10 +890,6 @@ static int lp5523_probe(struct i2c_client *client, } } - chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); - if (!chip) - return -ENOMEM; - led = devm_kcalloc(&client->dev, pdata->num_channels, sizeof(*led), GFP_KERNEL); if (!led) @@ -894,7 +897,6 @@ static int lp5523_probe(struct i2c_client *client, chip->cl = client; chip->pdata = pdata; - chip->cfg = &lp5523_cfg; mutex_init(&chip->lock); diff --git a/drivers/leds/leds-lp5562.c b/drivers/leds/leds-lp5562.c index 1c94422408b0..7ecdd199d7ef 100644 --- a/drivers/leds/leds-lp5562.c +++ b/drivers/leds/leds-lp5562.c @@ -520,9 +520,16 @@ static int lp5562_probe(struct i2c_client *client, struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev); struct device_node *np = client->dev.of_node; + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->cfg = &lp5562_cfg; + if (!pdata) { if (np) { - pdata = lp55xx_of_populate_pdata(&client->dev, np); + pdata = lp55xx_of_populate_pdata(&client->dev, np, + chip); if (IS_ERR(pdata)) return PTR_ERR(pdata); } else { @@ -531,9 +538,6 @@ static int lp5562_probe(struct i2c_client *client, } } - chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); - if (!chip) - return -ENOMEM; led = devm_kcalloc(&client->dev, pdata->num_channels, sizeof(*led), GFP_KERNEL); @@ -542,7 +546,6 @@ static int lp5562_probe(struct i2c_client *client, chip->cl = client; chip->pdata = pdata; - chip->cfg = &lp5562_cfg; mutex_init(&chip->lock); diff --git a/drivers/leds/leds-lp55xx-common.c b/drivers/leds/leds-lp55xx-common.c index 882ef39e4965..d33564aef563 100644 --- a/drivers/leds/leds-lp55xx-common.c +++ b/drivers/leds/leds-lp55xx-common.c @@ -35,6 +35,11 @@ static struct lp55xx_led *dev_to_lp55xx_led(struct device *dev) return cdev_to_lp55xx_led(dev_get_drvdata(dev)); } +static struct lp55xx_led *mcled_cdev_to_led(struct led_classdev_mc *mc_cdev) +{ + return container_of(mc_cdev, struct lp55xx_led, mc_cdev); +} + static void lp55xx_reset_device(struct lp55xx_chip *chip) { struct lp55xx_device_config *cfg = chip->cfg; @@ -131,6 +136,18 @@ static struct attribute *lp55xx_led_attrs[] = { }; ATTRIBUTE_GROUPS(lp55xx_led); +static int lp55xx_set_mc_brightness(struct led_classdev *cdev, + enum led_brightness brightness) +{ + struct led_classdev_mc *mc_dev = lcdev_to_mccdev(cdev); + struct lp55xx_led *led = mcled_cdev_to_led(mc_dev); + struct lp55xx_device_config *cfg = led->chip->cfg; + + led_mc_calc_color_components(&led->mc_cdev, brightness); + return cfg->multicolor_brightness_fn(led); + +} + static int lp55xx_set_brightness(struct led_classdev *cdev, enum led_brightness brightness) { @@ -147,9 +164,12 @@ static int lp55xx_init_led(struct lp55xx_led *led, struct lp55xx_platform_data *pdata = chip->pdata; struct lp55xx_device_config *cfg = chip->cfg; struct device *dev = &chip->cl->dev; + int max_channel = cfg->max_channel; + struct mc_subled *mc_led_info; + struct led_classdev *led_cdev; char name[32]; + int i, j = 0; int ret; - int max_channel = cfg->max_channel; if (chan >= max_channel) { dev_err(dev, "invalid channel: %d / %d\n", chan, max_channel); @@ -159,10 +179,43 @@ static int lp55xx_init_led(struct lp55xx_led *led, if (pdata->led_config[chan].led_current == 0) return 0; + if (pdata->led_config[chan].name) { + led->cdev.name = pdata->led_config[chan].name; + } else { + snprintf(name, sizeof(name), "%s:channel%d", + pdata->label ? : chip->cl->name, chan); + led->cdev.name = name; + } + + if (pdata->led_config[chan].num_colors > 1) { + mc_led_info = devm_kcalloc(dev, + pdata->led_config[chan].num_colors, + sizeof(*mc_led_info), GFP_KERNEL); + if (!mc_led_info) + return -ENOMEM; + + led_cdev = &led->mc_cdev.led_cdev; + led_cdev->name = led->cdev.name; + led_cdev->brightness_set_blocking = lp55xx_set_mc_brightness; + led->mc_cdev.num_colors = pdata->led_config[chan].num_colors; + for (i = 0; i < led->mc_cdev.num_colors; i++) { + mc_led_info[i].color_index = + pdata->led_config[chan].color_id[i]; + mc_led_info[i].channel = + pdata->led_config[chan].output_num[i]; + j++; + } + + led->mc_cdev.subled_info = mc_led_info; + } else { + led->cdev.brightness_set_blocking = lp55xx_set_brightness; + } + + led->cdev.groups = lp55xx_led_groups; + led->cdev.default_trigger = pdata->led_config[chan].default_trigger; led->led_current = pdata->led_config[chan].led_current; led->max_current = pdata->led_config[chan].max_current; led->chan_nr = pdata->led_config[chan].chan_nr; - led->cdev.default_trigger = pdata->led_config[chan].default_trigger; if (led->chan_nr >= max_channel) { dev_err(dev, "Use channel numbers between 0 and %d\n", @@ -170,18 +223,11 @@ static int lp55xx_init_led(struct lp55xx_led *led, return -EINVAL; } - led->cdev.brightness_set_blocking = lp55xx_set_brightness; - led->cdev.groups = lp55xx_led_groups; - - if (pdata->led_config[chan].name) { - led->cdev.name = pdata->led_config[chan].name; - } else { - snprintf(name, sizeof(name), "%s:channel%d", - pdata->label ? : chip->cl->name, chan); - led->cdev.name = name; - } + if (pdata->led_config[chan].num_colors > 1) + ret = devm_led_classdev_multicolor_register(dev, &led->mc_cdev); + else + ret = devm_led_classdev_register(dev, &led->cdev); - ret = devm_led_classdev_register(dev, &led->cdev); if (ret) { dev_err(dev, "led register err: %d\n", ret); return ret; @@ -525,14 +571,105 @@ void lp55xx_unregister_sysfs(struct lp55xx_chip *chip) } EXPORT_SYMBOL_GPL(lp55xx_unregister_sysfs); +static int lp55xx_parse_common_child(struct device_node *np, + struct lp55xx_led_config *cfg, + int led_number, int *chan_nr) +{ + int ret; + + of_property_read_string(np, "chan-name", + &cfg[led_number].name); + of_property_read_u8(np, "led-cur", + &cfg[led_number].led_current); + of_property_read_u8(np, "max-cur", + &cfg[led_number].max_current); + + ret = of_property_read_u32(np, "reg", chan_nr); + if (ret) + return ret; + + if (*chan_nr < 0 || *chan_nr > cfg->max_channel) + return -EINVAL; + + return 0; +} + +static int lp55xx_parse_multi_led_child(struct device_node *child, + struct lp55xx_led_config *cfg, + int child_number, int color_number) +{ + int chan_nr, color_id, ret; + + ret = lp55xx_parse_common_child(child, cfg, child_number, &chan_nr); + if (ret) + return ret; + + ret = of_property_read_u32(child, "color", &color_id); + if (ret) + return ret; + + cfg[child_number].color_id[color_number] = color_id; + cfg[child_number].output_num[color_number] = chan_nr; + + return 0; +} + +static int lp55xx_parse_multi_led(struct device_node *np, + struct lp55xx_led_config *cfg, + int child_number) +{ + struct device_node *child; + int num_colors = 0, ret; + + for_each_child_of_node(np, child) { + ret = lp55xx_parse_multi_led_child(child, cfg, child_number, + num_colors); + if (ret) + return ret; + num_colors++; + } + + cfg[child_number].num_colors = num_colors; + + return 0; +} + +static int lp55xx_parse_logical_led(struct device_node *np, + struct lp55xx_led_config *cfg, + int child_number) +{ + int led_color, ret; + int chan_nr = 0; + + cfg[child_number].default_trigger = + of_get_property(np, "linux,default-trigger", NULL); + + ret = of_property_read_u32(np, "color", &led_color); + if (ret) + return ret; + + if (led_color == LED_COLOR_ID_MULTI) + return lp55xx_parse_multi_led(np, cfg, child_number); + + ret = lp55xx_parse_common_child(np, cfg, child_number, &chan_nr); + if (ret < 0) + return ret; + + cfg[child_number].chan_nr = chan_nr; + + return ret; +} + struct lp55xx_platform_data *lp55xx_of_populate_pdata(struct device *dev, - struct device_node *np) + struct device_node *np, + struct lp55xx_chip *chip) { struct device_node *child; struct lp55xx_platform_data *pdata; struct lp55xx_led_config *cfg; int num_channels; int i = 0; + int ret; pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) @@ -550,16 +687,12 @@ struct lp55xx_platform_data *lp55xx_of_populate_pdata(struct device *dev, pdata->led_config = &cfg[0]; pdata->num_channels = num_channels; + cfg->max_channel = chip->cfg->max_channel; for_each_child_of_node(np, child) { - cfg[i].chan_nr = i; - - of_property_read_string(child, "chan-name", &cfg[i].name); - of_property_read_u8(child, "led-cur", &cfg[i].led_current); - of_property_read_u8(child, "max-cur", &cfg[i].max_current); - cfg[i].default_trigger = - of_get_property(child, "linux,default-trigger", NULL); - + ret = lp55xx_parse_logical_led(child, cfg, i); + if (ret) + return ERR_PTR(-EINVAL); i++; } diff --git a/drivers/leds/leds-lp55xx-common.h b/drivers/leds/leds-lp55xx-common.h index b9b1041e8143..2f38c5b33830 100644 --- a/drivers/leds/leds-lp55xx-common.h +++ b/drivers/leds/leds-lp55xx-common.h @@ -12,6 +12,8 @@ #ifndef _LEDS_LP55XX_COMMON_H #define _LEDS_LP55XX_COMMON_H +#include + enum lp55xx_engine_index { LP55XX_ENGINE_INVALID, LP55XX_ENGINE_1, @@ -93,6 +95,7 @@ struct lp55xx_reg { * @max_channel : Maximum number of channels * @post_init_device : Chip specific initialization code * @brightness_fn : Brightness function + * @multicolor_brightness_fn : Multicolor brightness function * @set_led_current : LED current set function * @firmware_cb : Call function when the firmware is loaded * @run_engine : Run internal engine for pattern @@ -106,9 +109,12 @@ struct lp55xx_device_config { /* define if the device has specific initialization process */ int (*post_init_device) (struct lp55xx_chip *chip); - /* access brightness register */ + /* set LED brightness */ int (*brightness_fn)(struct lp55xx_led *led); + /* set multicolor LED brightness */ + int (*multicolor_brightness_fn)(struct lp55xx_led *led); + /* current setting function */ void (*set_led_current) (struct lp55xx_led *led, u8 led_current); @@ -159,6 +165,8 @@ struct lp55xx_chip { * struct lp55xx_led * @chan_nr : Channel number * @cdev : LED class device + * @mc_cdev : Multi color class device + * @color_components: Multi color LED map information * @led_current : Current setting at each led channel * @max_current : Maximun current at each led channel * @brightness : Brightness value @@ -167,6 +175,7 @@ struct lp55xx_chip { struct lp55xx_led { int chan_nr; struct led_classdev cdev; + struct led_classdev_mc mc_cdev; u8 led_current; u8 max_current; u8 brightness; @@ -196,6 +205,7 @@ extern void lp55xx_unregister_sysfs(struct lp55xx_chip *chip); /* common device tree population function */ extern struct lp55xx_platform_data -*lp55xx_of_populate_pdata(struct device *dev, struct device_node *np); +*lp55xx_of_populate_pdata(struct device *dev, struct device_node *np, + struct lp55xx_chip *chip); #endif /* _LEDS_LP55XX_COMMON_H */ diff --git a/drivers/leds/leds-lp8501.c b/drivers/leds/leds-lp8501.c index a58019cdb8c3..ac2c31db4a65 100644 --- a/drivers/leds/leds-lp8501.c +++ b/drivers/leds/leds-lp8501.c @@ -308,9 +308,16 @@ static int lp8501_probe(struct i2c_client *client, struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev); struct device_node *np = client->dev.of_node; + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->cfg = &lp8501_cfg; + if (!pdata) { if (np) { - pdata = lp55xx_of_populate_pdata(&client->dev, np); + pdata = lp55xx_of_populate_pdata(&client->dev, np, + chip); if (IS_ERR(pdata)) return PTR_ERR(pdata); } else { @@ -319,10 +326,6 @@ static int lp8501_probe(struct i2c_client *client, } } - chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); - if (!chip) - return -ENOMEM; - led = devm_kcalloc(&client->dev, pdata->num_channels, sizeof(*led), GFP_KERNEL); if (!led) @@ -330,7 +333,6 @@ static int lp8501_probe(struct i2c_client *client, chip->cl = client; chip->pdata = pdata; - chip->cfg = &lp8501_cfg; mutex_init(&chip->lock); diff --git a/include/linux/platform_data/leds-lp55xx.h b/include/linux/platform_data/leds-lp55xx.h index 96a787100fda..d85275aea38c 100644 --- a/include/linux/platform_data/leds-lp55xx.h +++ b/include/linux/platform_data/leds-lp55xx.h @@ -12,17 +12,25 @@ #ifndef _LEDS_LP55XX_H #define _LEDS_LP55XX_H +#include + /* Clock configuration */ #define LP55XX_CLOCK_AUTO 0 #define LP55XX_CLOCK_INT 1 #define LP55XX_CLOCK_EXT 2 +#define LP55XX_MAX_GROUPED_CHAN 4 + struct lp55xx_led_config { const char *name; const char *default_trigger; u8 chan_nr; u8 led_current; /* mA x10, 0 if led is not connected */ u8 max_current; + int num_colors; + unsigned int max_channel; + int color_id[LED_COLOR_ID_MAX]; + int output_num[LED_COLOR_ID_MAX]; }; struct lp55xx_predef_pattern { From patchwork Mon Jun 22 18:59:15 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dan Murphy X-Patchwork-Id: 191372 Delivered-To: patch@linaro.org Received: by 2002:a54:3249:0:0:0:0:0 with SMTP id g9csp422271ecs; Mon, 22 Jun 2020 12:00:11 -0700 (PDT) X-Google-Smtp-Source: ABdhPJyigCWy0XcAPOjWFwI4Fhy790klxrsEssAaf/meaN2+w0N8rUsJf41Nyc0CL0b1jENjnkae X-Received: by 2002:a05:6402:3052:: with SMTP id bu18mr18034454edb.323.1592852411901; Mon, 22 Jun 2020 12:00:11 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1592852411; cv=none; d=google.com; s=arc-20160816; b=TUZ7VW7iAY38daGPcpfGeovK4JHHeIgFJNbELLLjcGtYCejrK6e1r/RPT8IEjTri/G tp/KciXBnjVTzpTTwTUrNMwdSbwKMg8fQHfFXOOPu2LEq0zGF7ZY5zBh3bGDT7BYfLyp pYeiEP71jrSwUl/XQVHmC+RsF0iaPwsKoxBxlo06x+K7Xn1YP5eQuaBHQvwqAMKm/qOr 42vsRWGTQVau/RW5XFNcirszxnB+IORs0i3Vsm+iAH7tDFTyjPQ7HHgE8PwQ+PKi4554 KFacuIPcBOZhfRzulPreR2mxKnSb9yvstIQ5o1v/xjUa/HL9TyhhSy+cERXY8GzYegHr tsRQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=duixcIbyvLfRQUl05kcDLZ9l5wNOLbe7Kwc9Cia/AFw=; b=POhd5ZvN+5wjIjviApDaDf0HXr63opqvLaN5ammMTyeeaE6zE5KuTpwwuuBa/DO5gz J38K9YGWQijfI154sUaIDgw+hZYbLBKppnJbJiNIxMAirK0l4o2UVsgs1OG95wKR+WE7 nrvPdZOgwMKZOLdt+3yFnPaJLJMlSvbXlzv+Ewg5KGdxMUwDxqoaad8Oexb5HfhcnyT5 EZ0AV4bHWmzgBKXpZciIWy7Us9mu7weYOL5Ni+A8vFOOjanq5eLUffWB1QYD5ggbzQTw 0Xk8bD0GEyYcKgjt9W7RfOZE5oGQxuSr3LPu22vBwM3yh7wz99dOoIUklMuj4n2w1ZEL Pbig== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b=FSeU5aq6; spf=pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-leds-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id z13si1244664edr.106.2020.06.22.12.00.11; Mon, 22 Jun 2020 12:00:11 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b=FSeU5aq6; spf=pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-leds-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730536AbgFVTAK (ORCPT + 1 other); Mon, 22 Jun 2020 15:00:10 -0400 Received: from lelv0143.ext.ti.com ([198.47.23.248]:54112 "EHLO lelv0143.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730519AbgFVTAI (ORCPT ); Mon, 22 Jun 2020 15:00:08 -0400 Received: from fllv0034.itg.ti.com ([10.64.40.246]) by lelv0143.ext.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxVIF102667; Mon, 22 Jun 2020 13:59:31 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1592852371; bh=duixcIbyvLfRQUl05kcDLZ9l5wNOLbe7Kwc9Cia/AFw=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=FSeU5aq6cPZbz03hYKjj1gLFeIbC03rtMYc0uoQOSmKkEmvrf+QDP5zYdHHFpJFgg 8ne0TyJ0FR6BCCseSVldWIXJc/JrHHrIoOp+M7zo5kKieugOAO2rITolbmxXuWswAx SO3ed4XXxMJckSkRQfmK//XR+ElV2BqQhMydX2L0= Received: from DLEE115.ent.ti.com (dlee115.ent.ti.com [157.170.170.26]) by fllv0034.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 05MIxVp6038079 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Mon, 22 Jun 2020 13:59:31 -0500 Received: from DLEE113.ent.ti.com (157.170.170.24) by DLEE115.ent.ti.com (157.170.170.26) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Mon, 22 Jun 2020 13:59:30 -0500 Received: from lelv0327.itg.ti.com (10.180.67.183) by DLEE113.ent.ti.com (157.170.170.24) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Mon, 22 Jun 2020 13:59:30 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0327.itg.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxUab113498; Mon, 22 Jun 2020 13:59:30 -0500 From: Dan Murphy To: , , CC: , , , , Dan Murphy , Linus Walleij Subject: [PATCH v29 12/16] ARM: defconfig: u8500: Add LP55XX_COMMON config flag Date: Mon, 22 Jun 2020 13:59:15 -0500 Message-ID: <20200622185919.2131-13-dmurphy@ti.com> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200622185919.2131-1-dmurphy@ti.com> References: <20200622185919.2131-1-dmurphy@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-leds-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-leds@vger.kernel.org The dependencies for the LP55XX LED drivers have been updated so that the child devices (i.e. LP5521) now depends on the LP55XX_COMMON config flag as opposed to the device selecting the LP55XX_COMMON flag. The LP55XX_COMMON needs to be set in the defconfig. CC: Linus Walleij Signed-off-by: Dan Murphy --- arch/arm/configs/u8500_defconfig | 1 + 1 file changed, 1 insertion(+) -- 2.26.2 diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 28dd7cf56048..dea599e1c17e 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -113,6 +113,7 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_LM3530=y CONFIG_LEDS_GPIO=y +CONFIG_LEDS_LP55XX_COMMON=y CONFIG_LEDS_LP5521=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y From patchwork Mon Jun 22 18:59:16 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dan Murphy X-Patchwork-Id: 191368 Delivered-To: patch@linaro.org Received: by 2002:a54:3249:0:0:0:0:0 with SMTP id g9csp421963ecs; Mon, 22 Jun 2020 11:59:44 -0700 (PDT) X-Google-Smtp-Source: ABdhPJyRWvwVTCG80hRtAa+RRRqzT4K5k0RIQ7UBi4E0GK1gUmp8XKCRp3RlF7Wvz09FpJboyJXE X-Received: by 2002:a17:906:f90c:: with SMTP id lc12mr850664ejb.306.1592852384322; Mon, 22 Jun 2020 11:59:44 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1592852384; cv=none; d=google.com; s=arc-20160816; b=LGNgj5HDZQvst1B/2I1ihxOQAh8ptBwrBcjhbOnZ4UlneB5vzkTCyD4suXo46psSHT 20hoIfqgNbsG7Ahu93hyprypUZjEHV/tovN5goD+UihNVCCl+aDs3X6lbKPEW0Tg46QW SO9/Xf4a941ncf/5z2SaQ1ldFvcHyZj4FylVRbEOxQp+U2D8RZMvhwneNJkzRyZxMg68 6nO55EYrgpahjo/oXE2RAmo7czo9dgQYDs4WfMFUyPOSvjfU2qlpKe+R02qr15WEHGxu +j+/q3Q3sW4ZboeteE+OcVkCuHzz8DggWa0GzZgXOrm3KbtvCJ02rln+aK8bJPig+2XD mwJw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=R4dHNQasNqNWmy1suWpwALJni0NAZjJCL1xLlVBfBvI=; b=sP10gPzZCbfYHTMuYkzCKqTRbJNOOHlo8aSM1OV6euJaLYBYWj4lZHxyuBfAEFHBMG c/fiiisbxT9U0StOL8nlrWiMNG5sU/TZfRDXT69XYdIQ2WNug18x8qHXmRhq5X5DXkCM R3S2CBeTN1gKKAPICADqyGOqDPu8PgM5b1MDO38umLgqhrNpsVb5e/rDblVRfC/xmNVI vBiJJmsHfgh4x1bNWw8oBnvNtinGWx93am//BPO0dPdpnLXcoqPGuIGGaAxZQZCnLmWW 98dbadWavxZwbjO2gKOUXgSL5tb3baUC5UqNYFb6DSkUPQns6Sd4SehUfDnMyfEVezHi t/2g== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b=HHxqYWRo; spf=pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-leds-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id t3si9376855edr.560.2020.06.22.11.59.44; Mon, 22 Jun 2020 11:59:44 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@ti.com header.s=ti-com-17Q1 header.b=HHxqYWRo; spf=pass (google.com: domain of linux-leds-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-leds-owner@vger.kernel.org; dmarc=pass (p=QUARANTINE sp=NONE dis=NONE) header.from=ti.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730403AbgFVS7m (ORCPT + 1 other); Mon, 22 Jun 2020 14:59:42 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:42328 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730382AbgFVS7l (ORCPT ); Mon, 22 Jun 2020 14:59:41 -0400 Received: from fllv0034.itg.ti.com ([10.64.40.246]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxVxG024952; Mon, 22 Jun 2020 13:59:31 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1592852371; bh=R4dHNQasNqNWmy1suWpwALJni0NAZjJCL1xLlVBfBvI=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=HHxqYWRoEpduU5G8rIYDuyeZFRkM54wTXrqz1qP8Ht4RTEfMR2Fle02O/oKZy9UpI 0ofAX5vRJy4jnjTqRhWZ41udc2snaHgVW9O85R39VCcw15d3obUAmD7k3RT6kEb0ku OgUNSYGGJ6iUbg/21GfF1dRymfqnAvmtIauZGTIs= Received: from DLEE113.ent.ti.com (dlee113.ent.ti.com [157.170.170.24]) by fllv0034.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 05MIxVBE038082 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Mon, 22 Jun 2020 13:59:31 -0500 Received: from DLEE107.ent.ti.com (157.170.170.37) by DLEE113.ent.ti.com (157.170.170.24) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Mon, 22 Jun 2020 13:59:31 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DLEE107.ent.ti.com (157.170.170.37) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Mon, 22 Jun 2020 13:59:31 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 05MIxUXS088136; Mon, 22 Jun 2020 13:59:31 -0500 From: Dan Murphy To: , , CC: , , , , Dan Murphy Subject: [PATCH v29 13/16] leds: lp5523: Update the lp5523 code to add multicolor brightness function Date: Mon, 22 Jun 2020 13:59:16 -0500 Message-ID: <20200622185919.2131-14-dmurphy@ti.com> X-Mailer: git-send-email 2.26.2 In-Reply-To: <20200622185919.2131-1-dmurphy@ti.com> References: <20200622185919.2131-1-dmurphy@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-leds-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-leds@vger.kernel.org Add the multicolor brightness call back to support the multicolor framework. This call back allows setting brightness on grouped channels in a single function. Acked-by: Pavel Machek Acked-by: Jacek Anaszewski Signed-off-by: Dan Murphy --- drivers/leds/leds-lp5523.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) -- 2.26.2 diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c index b076c16df9ab..9776dc72a764 100644 --- a/drivers/leds/leds-lp5523.c +++ b/drivers/leds/leds-lp5523.c @@ -791,6 +791,25 @@ static ssize_t store_master_fader_leds(struct device *dev, return ret; } +static int lp5523_multicolor_brightness(struct lp55xx_led *led) +{ + struct lp55xx_chip *chip = led->chip; + int ret; + int i; + + mutex_lock(&chip->lock); + for (i = 0; i < led->mc_cdev.num_colors; i++) { + ret = lp55xx_write(chip, + LP5523_REG_LED_PWM_BASE + + led->mc_cdev.subled_info[i].channel, + led->mc_cdev.subled_info[i].brightness); + if (ret) + break; + } + mutex_unlock(&chip->lock); + return ret; +} + static int lp5523_led_brightness(struct lp55xx_led *led) { struct lp55xx_chip *chip = led->chip; @@ -857,6 +876,7 @@ static struct lp55xx_device_config lp5523_cfg = { .max_channel = LP5523_MAX_LEDS, .post_init_device = lp5523_post_init_device, .brightness_fn = lp5523_led_brightness, + .multicolor_brightness_fn = lp5523_multicolor_brightness, .set_led_current = lp5523_set_led_current, .firmware_cb = lp5523_firmware_loaded, .run_engine = lp5523_run_engine,