From patchwork Tue Aug 4 06:33:47 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Roy Im X-Patchwork-Id: 255139 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-8.4 required=3.0 tests=BAYES_00, DATE_IN_PAST_03_06, DKIM_SIGNED, DKIM_VALID, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH, MAILING_LIST_MULTI, SIGNED_OFF_BY, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7FC05C433E1 for ; Tue, 4 Aug 2020 11:39:15 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 58F4020738 for ; Tue, 4 Aug 2020 11:39:15 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=dialogsemiconductor.onmicrosoft.com header.i=@dialogsemiconductor.onmicrosoft.com header.b="biXbi42J" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730213AbgHDLjO (ORCPT ); Tue, 4 Aug 2020 07:39:14 -0400 Received: from mail-eopbgr80059.outbound.protection.outlook.com ([40.107.8.59]:47640 "EHLO EUR04-VI1-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1730241AbgHDLjN (ORCPT ); Tue, 4 Aug 2020 07:39:13 -0400 ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=M5UPFf1Au72FugdZZkuzq3wVhxhhk4l52Bruq04t+KGn3P6MQTgdFKtzwJwSLNpjt41SmxmsPlSZsOyIBpqdCx/CC6Xhfx2ics5w+9C1NFELy78Vfj6wip9QixN3F6mROiW9BRw1LfPDRzKhSq+rhhtHz8tfPOa4VBUz7vLeovYGg3wiCD3+m9qK+rl3v1M3UPfyOqmjVdOPZ4tMTxa/JuHM7QdxW9oLk04oLEWlYrocynB+uHmbKtzUSqz6oa3jYWehspAQqWBuwf1c0HmSGS9vYtC9mLviMc8owjb8LFvwTHq/Xb7o/YDmTfqgGpp0b8Pn0DRT7Ey5VB5d6y9alg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=tU4aP7IIJ5dg2LEf+/SFhGhrMykB+YHcaTBNrM2+t/0=; b=e7RA6jVzd8bHbhzjVRy6IzCHG/PGlzKz8+KU2ImBXJfle2RhyvzUyfl0Xi1SPksc9DKCdHOCcVCBejgKS8FFm3z6DTmumMu/m72Jh4HrxnXi9H8HKWLpx5i/o25wBZmH/7Yu7a1Bc2iJ818pyL8ymOKCGu7BEn+jGVvhKyVz7PvJeEwGDB9TCW+YzdFbk3lQvYgniYERta5Y1tjkZgv6TdhYIZILRtT1PpyvxU76LCd64mTbyA8htiRU8efnPBE5SuYrQImw1zQKpGDoEAY4CrZZAxU9K/VOZOnVHGKgs48Rl/Whc+BnMQ1SqHM67pNCwJZEG/5LRCReq2HEFcnODA== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=softfail (sender ip is 193.240.239.45) smtp.rcpttodomain=vger.kernel.org smtp.mailfrom=diasemi.com; dmarc=fail (p=none sp=none pct=100) action=none header.from=diasemi.com; dkim=none (message not signed); arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=dialogsemiconductor.onmicrosoft.com; s=selector1-dialogsemiconductor-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=tU4aP7IIJ5dg2LEf+/SFhGhrMykB+YHcaTBNrM2+t/0=; b=biXbi42J+88/c6MzAk2xL/TDEJkAya2LpIpuslyDIt755Q3vujcYYD8XdA29szgq9Ngl0NYtu5hi0+2nFW8urH44HiwUpL6MHBc+0zEAkzkB4uq53oDW6n20i9FhpAYfT5V766hM9ERabGmGT418y4NL8zRwtxAa/z67gUUou9w= Received: from PR3P192CA0054.EURP192.PROD.OUTLOOK.COM (2603:10a6:102:57::29) by VI1PR10MB1744.EURPRD10.PROD.OUTLOOK.COM (2603:10a6:802:34::19) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.3239.18; Tue, 4 Aug 2020 11:39:08 +0000 Received: from HE1EUR02FT063.eop-EUR02.prod.protection.outlook.com (2603:10a6:102:57:cafe::c7) by PR3P192CA0054.outlook.office365.com (2603:10a6:102:57::29) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.3239.16 via Frontend Transport; Tue, 4 Aug 2020 11:39:08 +0000 X-MS-Exchange-Authentication-Results: spf=softfail (sender IP is 193.240.239.45) smtp.mailfrom=diasemi.com; vger.kernel.org; dkim=none (message not signed) header.d=none; vger.kernel.org; dmarc=fail action=none header.from=diasemi.com; Received-SPF: SoftFail (protection.outlook.com: domain of transitioning diasemi.com discourages use of 193.240.239.45 as permitted sender) Received: from mailrelay1.diasemi.com (193.240.239.45) by HE1EUR02FT063.mail.protection.outlook.com (10.152.11.211) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384) id 15.20.3239.20 via Frontend Transport; Tue, 4 Aug 2020 11:39:07 +0000 Received: from krsrvapps-03.diasemi.com (10.93.17.2) by NB-EX-CASHUB01.diasemi.com (10.1.16.140) with Microsoft SMTP Server id 14.3.468.0; Tue, 4 Aug 2020 13:39:05 +0200 Received: by krsrvapps-03.diasemi.com (Postfix, from userid 22266) id 4D1D713F673; Tue, 4 Aug 2020 20:39:04 +0900 (KST) Message-ID: In-Reply-To: References: From: Roy Im Date: Tue, 4 Aug 2020 15:33:47 +0900 Subject: [PATCH v19 2/3] dt-bindings: input: Add document bindings for DA7280 To: Dmitry Torokhov , Mark Rutland , Rob Herring CC: Support Opensource , , , MIME-Version: 1.0 X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-Office365-Filtering-Correlation-Id: 1d250a32-0589-4d8a-b621-08d8386affac X-MS-TrafficTypeDiagnostic: VI1PR10MB1744: X-Microsoft-Antispam-PRVS: X-MS-Oob-TLC-OOBClassifiers: OLM:8273; X-MS-Exchange-SenderADCheck: 1 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: Z5YsOd/Ypmm7Ggm5B/TMbi82YuEUkbuexoq2HbHTLZfD6nERg+8aL6G3lgISodagPWyxGPneLhCfupD5DG/lHTJ9bII4p+kHERGP5IDvCZRvA2eN+nueWASSsGHmiEXRtE/PjuaWxbM2LUexLDQFY4Kop0EFOGBNKQE6c2FrdPfDrRzNcVYhIDcXMs3vVMK3tj5Xk7FXr9MlpZVWOnRiHNswyeVq4PLUmw8UOd3USa7bSYnUVK+HQxSrC1x2ePQWCfTVH8RBRCV/ybi0gA5A9tOxCaV5WanG2NvKZrIEP7AaQwEswnbTdCLuVowzbi0o/sBljwYt3biMJ69kGa8IdhaP2Z1Sm/Xb8JwSNQ9blCrUMAIf0D8L/t/54YAf4wriYyEfiIGWNXtTYmgKJQHIMuWISOXMIhJgrgdKDMHwI8eu/0K73Bwz4Zws3GV6XZZ8 X-Forefront-Antispam-Report: CIP:193.240.239.45; CTRY:GB; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:mailrelay1.diasemi.com; PTR:InfoDomainNonexistent; CAT:NONE; SFTY:; SFS:(4636009)(46966005)(2616005)(4326008)(6666004)(336012)(36756003)(26005)(33310700002)(2906002)(86362001)(47076004)(83380400001)(5660300002)(8676002)(82310400002)(426003)(54906003)(6266002)(36906005)(70586007)(110136005)(356005)(8936002)(42186006)(81166007)(498600001)(186003)(70206006); DIR:OUT; SFP:1101; X-OriginatorOrg: diasemi.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 04 Aug 2020 11:39:07.7063 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: 1d250a32-0589-4d8a-b621-08d8386affac X-MS-Exchange-CrossTenant-Id: 511e3c0e-ee96-486e-a2ec-e272ffa37b7c X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=511e3c0e-ee96-486e-a2ec-e272ffa37b7c; Ip=[193.240.239.45]; Helo=[mailrelay1.diasemi.com] X-MS-Exchange-CrossTenant-AuthSource: HE1EUR02FT063.eop-EUR02.prod.protection.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: VI1PR10MB1744 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org Add device tree binding information for DA7280 haptic driver. Example bindings for DA7280 are added. Reviewed-by: Rob Herring . Signed-off-by: Roy Im --- v19: No changes. v18: No changes. v17: No changes. v16: No changes. v15: No changes. v14: No changes. v13: No changes. v12: No changes. v11: No changes. v10: No changes. v9: No changes. v8: Updated descriptions for new properties. v7: No changes. v6: No changes. v5: Updated descriptions and fixed errors. v4: Fixed commit message, properties. v3: Fixed subject format. v2: No changes .../devicetree/bindings/input/dlg,da7280.txt | 109 +++++++++++++++++++++ 1 file changed, 109 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/dlg,da7280.txt diff --git a/Documentation/devicetree/bindings/input/dlg,da7280.txt b/Documentation/devicetree/bindings/input/dlg,da7280.txt new file mode 100644 index 0000000..e6b719d --- /dev/null +++ b/Documentation/devicetree/bindings/input/dlg,da7280.txt @@ -0,0 +1,109 @@ +Dialog Semiconductor DA7280 Haptics bindings + +Required properties: +- compatible: Should be "dlg,da7280". +- reg: Specifies the I2C slave address. + +- interrupt-parent : Specifies the phandle of the interrupt controller to + which the IRQs from DA7280 are delivered to. + +- dlg,actuator-type: Set Actuator type. it should be one of: + "LRA" - Linear Resonance Actuator type. + "ERM-bar" - Bar type Eccentric Rotating Mass. + "ERM-coin" - Coin type Eccentric Rotating Mass. + +- dlg,const-op-mode: Haptic operation mode for FF_CONSTANT. + Possible values: + 1 - Direct register override(DRO) mode triggered by i2c(default), + 2 - PWM data source mode controlled by PWM duty, +- dlg,periodic-op-mode: Haptic operation mode for FF_PERIODIC. + Possible values: + 1 - Register triggered waveform memory(RTWM) mode, the pattern + assigned to the PS_SEQ_ID played as much times as PS_SEQ_LOOP, + 2 - Edge triggered waveform memory(ETWM) mode, external GPI(N) + control are required to enable/disable and it needs to keep + device enabled by sending magnitude (X > 0), + the pattern is assigned to the GPI(N)_SEQUENCE_ID below. + The default value is 1 for both of the operation modes. + For more details, please see the datasheet. + +- dlg,nom-microvolt: Nominal actuator voltage rating. + Valid values: 0 - 6000000. +- dlg,abs-max-microvolt: Absolute actuator maximum voltage rating. + Valid values: 0 - 6000000. +- dlg,imax-microamp: Actuator max current rating. + Valid values: 0 - 252000. + Default: 130000. +- dlg,impd-micro-ohms: the impedance of the actuator in micro ohms. + Valid values: 0 - 1500000000. + +Optional properties: +- pwms : phandle to the physical PWM(Pulse Width Modulation) device. + PWM properties should be named "pwms". And number of cell is different + for each pwm device. + (See Documentation/devicetree/bindings/pwm/pwm.txt + for further information relating to pwm properties) + +- dlg,ps-seq-id: the PS_SEQ_ID(pattern ID in waveform memory inside chip) + to play back when RTWM-MODE is enabled. + Valid range: 0 - 15. +- dlg,ps-seq-loop: the PS_SEQ_LOOP, Number of times the pre-stored sequence + pointed to by PS_SEQ_ID or GPI(N)_SEQUENCE_ID is repeated. + Valid range: 0 - 15. +- dlg,gpiN-seq-id: the GPI(N)_SEQUENCE_ID, pattern to play + when gpi0 is triggered, 'N' must be 0 - 2. + Valid range: 0 - 15. +- dlg,gpiN-mode: the pattern mode which can select either + "Single-pattern" or "Multi-pattern", 'N' must be 0 - 2. +- dlg,gpiN-polarity: gpiN polarity which can be chosen among + "Rising-edge", "Falling-edge" and "Both-edge", + 'N' must be 0 - 2 + Haptic will work by this edge option in case of ETWM mode. + +- dlg,resonant-freq-hz: use in case of LRA. + the frequency range: 50 - 300. + Default: 205. + +- dlg,bemf-sens-enable: Enable for internal loop computations. +- dlg,freq-track-enable: Enable for resonant frequency tracking. +- dlg,acc-enable: Enable for active acceleration. +- dlg,rapid-stop-enable: Enable for rapid stop. +- dlg,amp-pid-enable: Enable for the amplitude PID. +- dlg,mem-array: Customized waveform memory(patterns) data downloaded to + the device during initialization. This is an array of 100 values(u8). + +For further information, see device datasheet. + +====== + +Example: + + haptics: da7280-haptics@4a { + compatible = "dlg,da7280"; + reg = <0x4a>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + dlg,actuator-type = "LRA"; + dlg,dlg,const-op-mode = <1>; + dlg,dlg,periodic-op-mode = <1>; + dlg,nom-microvolt = <2000000>; + dlg,abs-max-microvolt = <2000000>; + dlg,imax-microamp = <170000>; + dlg,resonant-freq-hz = <180>; + dlg,impd-micro-ohms = <10500000>; + dlg,freq-track-enable; + dlg,rapid-stop-enable; + dlg,mem-array = < + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + >; + + }; From patchwork Tue Aug 4 06:33:48 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Roy Im X-Patchwork-Id: 255138 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-8.4 required=3.0 tests=BAYES_00, DATE_IN_PAST_03_06, DKIM_SIGNED, DKIM_VALID, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH, MAILING_LIST_MULTI, SIGNED_OFF_BY, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 00F42C433E0 for ; Tue, 4 Aug 2020 11:39:41 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id C21E120A8B for ; Tue, 4 Aug 2020 11:39:40 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=dialogsemiconductor.onmicrosoft.com header.i=@dialogsemiconductor.onmicrosoft.com header.b="oKbESYbQ" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730241AbgHDLjk (ORCPT ); Tue, 4 Aug 2020 07:39:40 -0400 Received: from mail-eopbgr40061.outbound.protection.outlook.com ([40.107.4.61]:48232 "EHLO EUR03-DB5-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1730114AbgHDLjZ (ORCPT ); Tue, 4 Aug 2020 07:39:25 -0400 ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=m9nA9Q3kC257DEwivUSKzA/GgLnYLyZWNO3e9KJ5ViJBCxz62Y2xiQ1kRbO0hxvE8bg/VBZiWKEBCGoF1nWlO72AY+EA2R6fEmaC+itrnSUhXeMiThmE2i6ZS83X8AJNkMzD+TVwt9EzB+ZM92/gSd1k5kWP0/Q8h3ce23A6WrUIIsEEBZ+SAAs2WviDL/2OvRvYSMedjGhYRIZ6MKpLo7LhPf4dOsyok4dmLEtzcxcLaLUJJMQYh20sAaA315oFge21JHW8TomF9FT/+KpnDnzwd5CWzeRQPB4fLOuZhbDCjVrWd/S2BJc7wSbjlBVR2odqLwVzbjbkQbxSK2oycw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=29zankK0jgVo4muVhDemjERU2gpnX7Rc1d5voC+n6pw=; b=IHMWR2kcbIepnJK+iVF4ECqOGGapZX55X74UzInHJBSSnUy62+388dQe3B+PfIZIkJZVMdpFG3TMc9KVa68dpv6+BFCFOCXIj8LYMXlhO70HPzXBxf5Xl+rAiq4eqrp0gr5nZCgVTZTkL5zve09WkoLkuzfKlObdsB74AtxOkMRgikBGi+Bjja7psd6gsA/xbgYt6kHYqi1/NEGTpuha1d+FbvrePss/l7Ui5xHe7ZC5gZXmu+oIKQJ88h0oX3sLLaPOLnT5X7XgUSwpwU1LFF1uAK4VFiSruIijLrQHaY06NeUtlk8wywsdO+MnF8bMQMRcB+VRixfk17MyXQxozA== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=softfail (sender ip is 193.240.239.45) smtp.rcpttodomain=pengutronix.de smtp.mailfrom=diasemi.com; dmarc=fail (p=none sp=none pct=100) action=none header.from=diasemi.com; dkim=none (message not signed); arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=dialogsemiconductor.onmicrosoft.com; s=selector1-dialogsemiconductor-onmicrosoft-com; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=29zankK0jgVo4muVhDemjERU2gpnX7Rc1d5voC+n6pw=; b=oKbESYbQ//cEFbjx6MQIjgGnjX2CyWs8lxLWBcTS3yLTdfRP5OOEmnygv/fuORc6TAHGlAi9Nn95WSozQSbDRXzCvhrMdB/W2HM9yUmlNrRC1JKIlqvN75TgbLMI582IlLbPJb56+DI7Fztx1pt6CzxsnCkxKPu4NCjIxZyOiQk= Received: from PR3P192CA0034.EURP192.PROD.OUTLOOK.COM (2603:10a6:102:57::9) by AM5PR10MB1649.EURPRD10.PROD.OUTLOOK.COM (2603:10a6:206:1d::15) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.3239.20; Tue, 4 Aug 2020 11:39:13 +0000 Received: from HE1EUR02FT063.eop-EUR02.prod.protection.outlook.com (2603:10a6:102:57:cafe::fa) by PR3P192CA0034.outlook.office365.com (2603:10a6:102:57::9) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.3261.15 via Frontend Transport; Tue, 4 Aug 2020 11:39:13 +0000 X-MS-Exchange-Authentication-Results: spf=softfail (sender IP is 193.240.239.45) smtp.mailfrom=diasemi.com; pengutronix.de; dkim=none (message not signed) header.d=none;pengutronix.de; dmarc=fail action=none header.from=diasemi.com; Received-SPF: SoftFail (protection.outlook.com: domain of transitioning diasemi.com discourages use of 193.240.239.45 as permitted sender) Received: from mailrelay1.diasemi.com (193.240.239.45) by HE1EUR02FT063.mail.protection.outlook.com (10.152.11.211) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384) id 15.20.3239.20 via Frontend Transport; Tue, 4 Aug 2020 11:39:12 +0000 Received: from krsrvapps-03.diasemi.com (10.93.17.2) by NB-EX-CASHUB01.diasemi.com (10.1.16.140) with Microsoft SMTP Server id 14.3.468.0; Tue, 4 Aug 2020 13:39:05 +0200 Received: by krsrvapps-03.diasemi.com (Postfix, from userid 22266) id 4F46213F674; Tue, 4 Aug 2020 20:39:04 +0900 (KST) Message-ID: <70f72bd6c1c568a8ea456cb1e704045739b01844.1596522828.git.Roy.Im@diasemi.com> In-Reply-To: References: From: Roy Im Date: Tue, 4 Aug 2020 15:33:48 +0900 Subject: [PATCH v19 3/3] Input: new da7280 haptic driver To: Uwe Kleine-Koenig , Bartosz Golaszewski , Brian Masney , Dmitry Torokhov , Greg KH , Lee Jones , Luca Weiss , Maximilian Luz , Pascal PAILLET-LME , Rob Herring , Samuel Ortiz , Thierry Reding , Thomas Gleixner CC: Support Opensource , , , MIME-Version: 1.0 X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-Office365-Filtering-Correlation-Id: cae18593-1242-4729-15ee-08d8386b02bc X-MS-TrafficTypeDiagnostic: AM5PR10MB1649: X-Microsoft-Antispam-PRVS: X-MS-Oob-TLC-OOBClassifiers: OLM:4502; X-MS-Exchange-SenderADCheck: 1 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: MulrUUNXFFMaEd6v0GPkNimU9OBvV3i7JRP12W4VsaYtHcj0lzlIXeLz4ieQDy3hlkM0V34P2McIEh1FfgU+FavpzdiLSqaE+y+vJm1FEUYQKT8XKtbI4DVUdj9rS9UaO4OZ8jJ3PhkCQ7z/QlmvVsjU9udLdiFpX67VUf/To6a9qUNLySL76rz48AqB4mCB5llAA+yeftp/nzlSiavjayNBccJAuoiajJhnyNGX2kbaXPqplSfH8PYO5zZGTJk7TIg6T6Qe1SCNOj2iCgmmLtQMh5aqHET5tXQh9PfzwFYI2KAf+bspal518bJ5Jubf3ohMYibhnKqX/ClHFDmX89us/PWGJbnSdHXASKHpLoU3LtlYgBPenPNHXQDJ3kqHRTDX/cZxNxjWAtDgOihYYtwMrZTSXIPxmAEleZ19Z6Jbf39TrsFPB4aw8Pmji++n X-Forefront-Antispam-Report: CIP:193.240.239.45; CTRY:GB; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:mailrelay1.diasemi.com; PTR:InfoDomainNonexistent; CAT:NONE; SFTY:; SFS:(4636009)(46966005)(33310700002)(82310400002)(8676002)(47076004)(356005)(336012)(81166007)(8936002)(6666004)(86362001)(426003)(54906003)(2616005)(83380400001)(110136005)(42186006)(4326008)(498600001)(36756003)(7416002)(36906005)(6266002)(5660300002)(186003)(30864003)(26005)(2906002)(70586007)(70206006)(921003)(579004); DIR:OUT; SFP:1101; X-OriginatorOrg: diasemi.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 04 Aug 2020 11:39:12.8287 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: cae18593-1242-4729-15ee-08d8386b02bc X-MS-Exchange-CrossTenant-Id: 511e3c0e-ee96-486e-a2ec-e272ffa37b7c X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=511e3c0e-ee96-486e-a2ec-e272ffa37b7c; Ip=[193.240.239.45]; Helo=[mailrelay1.diasemi.com] X-MS-Exchange-CrossTenant-AuthSource: HE1EUR02FT063.eop-EUR02.prod.protection.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: AM5PR10MB1649 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org Adds support for the Dialog DA7280 LRA/ERM Haptic Driver with multiple mode and integrated waveform memory and wideband support. It communicates via an I2C bus to the device. Reviewed-by: Jes Sorensen . Signed-off-by: Roy Im --- v19: - Corrected some errors and replaced some code to proper one. - Improved work queues and removed sysfs attributes - Added changes for gpix id in upload effect. v18: - Corrected comments in Kconfig - Updated to preferred style for multi line comments in c file. v17: - fixed an issue. v16: - Corrected some code and updated description in Kconfig. v15: - Removed some defines and updated some comments. v14: - Updated pwm related code, alignments and comments. v13: - Updated some conditions in pwm function and alignments. v12: No changes. v11: - Updated the pwm related code, comments and typo. v10: - Updated the pwm related function and added some comments. v9: - Removed the header file and put the definitions into the c file. - Updated the pwm code and error logs with %pE v8: - Added changes to support FF_PERIODIC/FF_CUSTOM and FF_CONSTANT. - Updated the dt-related code. - Removed memless related functions. v7: - Added more attributes to handle one value per file. - Replaced and updated the dt-related code and functions called. - Fixed error/functions. v6: No changes. v5: Fixed errors in Kconfig file. v4: Updated code as dt-bindings are changed. v3: No changes. v2: Fixed kbuild error/warning drivers/input/misc/Kconfig | 12 + drivers/input/misc/Makefile | 1 + drivers/input/misc/da7280.c | 1476 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1489 insertions(+) create mode 100644 drivers/input/misc/da7280.c diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 362e8a0..d38b466 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -869,4 +869,16 @@ config INPUT_STPMIC1_ONKEY To compile this driver as a module, choose M here: the module will be called stpmic1_onkey. +config INPUT_DA7280_HAPTICS + tristate "Dialog Semiconductor DA7280 haptics support" + depends on INPUT && I2C + select REGMAP_I2C + help + Say Y to enable support for the Dialog DA7280 haptics driver. + The haptics can be controlled by PWM or GPIO + with I2C communication. + + To compile this driver as a module, choose M here: the + module will be called da7280. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index a48e5f2..9cfd6ab 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_INPUT_CMA3000) += cma3000_d0x.o obj-$(CONFIG_INPUT_CMA3000_I2C) += cma3000_d0x_i2c.o obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o obj-$(CONFIG_INPUT_CPCAP_PWRBUTTON) += cpcap-pwrbutton.o +obj-$(CONFIG_INPUT_DA7280_HAPTICS) += da7280.o obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o obj-$(CONFIG_INPUT_DA9055_ONKEY) += da9055_onkey.o obj-$(CONFIG_INPUT_DA9063_ONKEY) += da9063_onkey.o diff --git a/drivers/input/misc/da7280.c b/drivers/input/misc/da7280.c new file mode 100644 index 0000000..ea292c8 --- /dev/null +++ b/drivers/input/misc/da7280.c @@ -0,0 +1,1476 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * DA7280 Haptic device driver + * + * Copyright (c) 2020 Dialog Semiconductor. + * Author: Roy Im + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Registers */ +#define DA7280_IRQ_EVENT1 0x03 +#define DA7280_IRQ_EVENT_WARNING_DIAG 0x04 +#define DA7280_IRQ_EVENT_SEQ_DIAG 0x05 +#define DA7280_IRQ_STATUS1 0x06 +#define DA7280_IRQ_MASK1 0x07 +#define DA7280_FRQ_LRA_PER_H 0x0A +#define DA7280_FRQ_LRA_PER_L 0x0B +#define DA7280_ACTUATOR1 0x0C +#define DA7280_ACTUATOR2 0x0D +#define DA7280_ACTUATOR3 0x0E +#define DA7280_CALIB_V2I_H 0x0F +#define DA7280_CALIB_V2I_L 0x10 +#define DA7280_TOP_CFG1 0x13 +#define DA7280_TOP_CFG2 0x14 +#define DA7280_TOP_CFG4 0x16 +#define DA7280_TOP_INT_CFG1 0x17 +#define DA7280_TOP_CTL1 0x22 +#define DA7280_TOP_CTL2 0x23 +#define DA7280_SEQ_CTL2 0x28 +#define DA7280_GPI_0_CTL 0x29 +#define DA7280_GPI_1_CTL 0x2A +#define DA7280_GPI_2_CTL 0x2B +#define DA7280_MEM_CTL1 0x2C +#define DA7280_MEM_CTL2 0x2D +#define DA7280_TOP_CFG5 0x6E +#define DA7280_IRQ_MASK2 0x83 +#define DA7280_SNP_MEM_99 0xE7 + +/* Register field */ + +/* DA7280_IRQ_EVENT1 (Address 0x03) */ +#define DA7280_E_SEQ_CONTINUE_MASK BIT(0) +#define DA7280_E_UVLO_MASK BIT(1) +#define DA7280_E_SEQ_DONE_MASK BIT(2) +#define DA7280_E_OVERTEMP_CRIT_MASK BIT(3) +#define DA7280_E_SEQ_FAULT_MASK BIT(4) +#define DA7280_E_WARNING_MASK BIT(5) +#define DA7280_E_ACTUATOR_FAULT_MASK BIT(6) +#define DA7280_E_OC_FAULT_MASK BIT(7) + +/* DA7280_IRQ_EVENT_WARNING_DIAG (Address 0x04) */ +#define DA7280_E_OVERTEMP_WARN_MASK BIT(3) +#define DA7280_E_MEM_TYPE_MASK BIT(4) +#define DA7280_E_LIM_DRIVE_ACC_MASK BIT(6) +#define DA7280_E_LIM_DRIVE_MASK BIT(7) + +/* DA7280_IRQ_EVENT_PAT_DIAG (Address 0x05) */ +#define DA7280_E_PWM_FAULT_MASK BIT(5) +#define DA7280_E_MEM_FAULT_MASK BIT(6) +#define DA7280_E_SEQ_ID_FAULT_MASK BIT(7) + +/* DA7280_IRQ_STATUS1 (Address 0x06) */ +#define DA7280_STA_SEQ_CONTINUE_MASK BIT(0) +#define DA7280_STA_UVLO_VBAT_OK_MASK BIT(1) +#define DA7280_STA_SEQ_DONE_MASK BIT(2) +#define DA7280_STA_OVERTEMP_CRIT_MASK BIT(3) +#define DA7280_STA_SEQ_FAULT_MASK BIT(4) +#define DA7280_STA_WARNING_MASK BIT(5) +#define DA7280_STA_ACTUATOR_MASK BIT(6) +#define DA7280_STA_OC_MASK BIT(7) + +/* DA7280_IRQ_MASK1 (Address 0x07) */ +#define DA7280_SEQ_CONTINUE_M_MASK BIT(0) +#define DA7280_E_UVLO_M_MASK BIT(1) +#define DA7280_SEQ_DONE_M_MASK BIT(2) +#define DA7280_OVERTEMP_CRIT_M_MASK BIT(3) +#define DA7280_SEQ_FAULT_M_MASK BIT(4) +#define DA7280_WARNING_M_MASK BIT(5) +#define DA7280_ACTUATOR_M_MASK BIT(6) +#define DA7280_OC_M_MASK BIT(7) + +/* DA7280_ACTUATOR3 (Address 0x0e) */ +#define DA7280_IMAX_MASK GENMASK(4, 0) + +/* DA7280_TOP_CFG1 (Address 0x13) */ +#define DA7280_AMP_PID_EN_MASK BIT(0) +#define DA7280_RAPID_STOP_EN_MASK BIT(1) +#define DA7280_ACCELERATION_EN_MASK BIT(2) +#define DA7280_FREQ_TRACK_EN_MASK BIT(3) +#define DA7280_BEMF_SENSE_EN_MASK BIT(4) +#define DA7280_ACTUATOR_TYPE_MASK BIT(5) + +/* DA7280_TOP_CFG2 (Address 0x14) */ +#define DA7280_FULL_BRAKE_THR_MASK GENMASK(3, 0) +#define DA7280_MEM_DATA_SIGNED_MASK BIT(4) + +/* DA7280_TOP_CFG4 (Address 0x16) */ +#define DA7280_TST_CALIB_IMPEDANCE_DIS_MASK BIT(6) +#define DA7280_V2I_FACTOR_FREEZE_MASK BIT(7) + +/* DA7280_TOP_INT_CFG1 (Address 0x17) */ +#define DA7280_BEMF_FAULT_LIM_MASK GENMASK(1, 0) + +/* DA7280_TOP_CTL1 (Address 0x22) */ +#define DA7280_OPERATION_MODE_MASK GENMASK(2, 0) +#define DA7280_STANDBY_EN_MASK BIT(3) +#define DA7280_SEQ_START_MASK BIT(4) + +/* DA7280_SEQ_CTL2 (Address 0x28) */ +#define DA7280_PS_SEQ_ID_MASK GENMASK(3, 0) +#define DA7280_PS_SEQ_LOOP_MASK GENMASK(7, 4) + +/* DA7280_GPIO_0_CTL (Address 0x29) */ +#define DA7280_GPI0_POLARITY_MASK GENMASK(1, 0) +#define DA7280_GPI0_MODE_MASK BIT(2) +#define DA7280_GPI0_SEQUENCE_ID_MASK GENMASK(6, 3) + +/* DA7280_GPIO_1_CTL (Address 0x2a) */ +#define DA7280_GPI1_POLARITY_MASK GENMASK(1, 0) +#define DA7280_GPI1_MODE_MASK BIT(2) +#define DA7280_GPI1_SEQUENCE_ID_MASK GENMASK(6, 3) + +/* DA7280_GPIO_2_CTL (Address 0x2b) */ +#define DA7280_GPI2_POLARITY_MASK GENMASK(1, 0) +#define DA7280_GPI2_MODE_MASK BIT(2) +#define DA7280_GPI2_SEQUENCE_ID_MASK GENMASK(6, 3) + +/* DA7280_MEM_CTL2 (Address 0x2d) */ +#define DA7280_WAV_MEM_LOCK_MASK BIT(7) + +/* DA7280_TOP_CFG5 (Address 0x6e) */ +#define DA7280_V2I_FACTOR_OFFSET_EN_MASK BIT(0) + +/* DA7280_IRQ_MASK2 (Address 0x83) */ +#define DA7280_ADC_SAT_M_MASK BIT(7) + +/* Controls */ + +#define DA7280_VOLTAGE_RATE_MAX 6000000 +#define DA7280_VOLTAGE_RATE_STEP 23400 +#define DA7280_NOMMAX_DFT 0x6B +#define DA7280_ABSMAX_DFT 0x78 + +#define DA7280_IMPD_MAX 1500000000 +#define DA7280_IMPD_DEFAULT 22000000 + +#define DA7280_IMAX_DEFAULT 0x0E +#define DA7280_IMAX_STEP 7200 +#define DA7280_IMAX_LIMIT 252000 + +#define DA7280_RESONT_FREQH_DFT 0x39 +#define DA7280_RESONT_FREQL_DFT 0x32 +#define DA7280_MIN_RESONAT_FREQ_HZ 50 +#define DA7280_MAX_RESONAT_FREQ_HZ 300 + +#define DA7280_SEQ_ID_MAX 15 +#define DA7280_SEQ_LOOP_MAX 15 +#define DA7280_GPI_SEQ_ID_DFT 0 +#define DA7280_GPI_SEQ_ID_MAX 2 + +#define DA7280_SNP_MEM_SIZE 100 +#define DA7280_SNP_MEM_MAX DA7280_SNP_MEM_99 + +#define IRQ_NUM 3 + +#define DA7280_SKIP_INIT 0x100 + +#define DA7280_FF_EFFECT_COUNT_MAX 15 + +/* Maximum gain is 0x7fff for PWM mode */ +#define MAX_MAGNITUDE_SHIFT 15 + +enum da7280_haptic_dev_t { + DA7280_LRA = 0, + DA7280_ERM_BAR = 1, + DA7280_ERM_COIN = 2, + DA7280_DEV_MAX, +}; + +enum da7280_op_mode { + DA7280_INACTIVE = 0, + DA7280_DRO_MODE = 1, + DA7280_PWM_MODE = 2, + DA7280_RTWM_MODE = 3, + DA7280_ETWM_MODE = 4, + DA7280_OPMODE_MAX, +}; + +#define DA7280_FF_CONSTANT_DRO 1 +#define DA7280_FF_PERIODIC_PWM 2 +#define DA7280_FF_PERIODIC_RTWM 1 +#define DA7280_FF_PERIODIC_ETWM 2 + +#define DA7280_FF_PERIODIC_MODE DA7280_RTWM_MODE +#define DA7280_FF_CONSTANT_MODE DA7280_DRO_MODE + +enum da7280_custom_effect_param { + DA7280_CUSTOM_SEQ_ID_IDX = 0, + DA7280_CUSTOM_SEQ_LOOP_IDX = 1, + DA7280_CUSTOM_DATA_LEN = 2, +}; + +enum da7280_custom_gpi_effect_param { + DA7280_CUSTOM_GPI_SEQ_ID_IDX = 0, + DA7280_CUSTOM_GPI_NUM_IDX = 2, + DA7280_CUSTOM_GP_DATA_LEN = 3, +}; + +struct da7280_gpi_ctl { + u8 seq_id; + u8 mode; + u8 polarity; +}; + +struct da7280_haptic { + struct regmap *regmap; + struct input_dev *input_dev; + struct device *dev; + struct i2c_client *client; + struct pwm_device *pwm_dev; + + bool legacy; + struct delayed_work work_duration; + struct work_struct work_playback; + struct work_struct work_setgain; + int val; + u16 gain; + u16 new_gain; + + s16 level; + + u8 dev_type; + u8 op_mode; + u8 const_op_mode; + u8 periodic_op_mode; + u16 nommax; + u16 absmax; + u32 imax; + u32 impd; + u32 resonant_freq_h; + u32 resonant_freq_l; + bool bemf_sense_en; + bool freq_track_en; + bool acc_en; + bool rapid_stop_en; + bool amp_pid_en; + u8 ps_seq_id; + u8 ps_seq_loop; + struct da7280_gpi_ctl gpi_ctl[3]; + bool mem_update; + u8 snp_mem[DA7280_SNP_MEM_SIZE]; + u8 enabled; + int length_ms; +}; + +static bool da7280_volatile_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case DA7280_IRQ_EVENT1: + case DA7280_IRQ_EVENT_WARNING_DIAG: + case DA7280_IRQ_EVENT_SEQ_DIAG: + case DA7280_IRQ_STATUS1: + case DA7280_TOP_CTL1: + return true; + default: + return false; + } +} + +static const struct regmap_config da7280_haptic_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = DA7280_SNP_MEM_MAX, + .volatile_reg = da7280_volatile_register, +}; + +static int da7280_haptic_mem_update(struct da7280_haptic *haptics) +{ + unsigned int val; + int error; + + /* The patterns should be updated when haptic is not working */ + error = regmap_read(haptics->regmap, DA7280_IRQ_STATUS1, &val); + if (error) + return error; + if (val & DA7280_STA_WARNING_MASK) { + dev_warn(haptics->dev, + "Warning! Please check HAPTIC status.\n"); + return -EBUSY; + } + + /* Patterns are not updated if the lock bit is enabled */ + val = 0; + error = regmap_read(haptics->regmap, DA7280_MEM_CTL2, &val); + if (error) + return error; + if (~val & DA7280_WAV_MEM_LOCK_MASK) { + dev_warn(haptics->dev, + "Please unlock the bit first\n"); + return -EACCES; + } + + /* Set to Inactive mode to make sure safety */ + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_OPERATION_MODE_MASK, + 0); + if (error) + return error; + + error = regmap_read(haptics->regmap, DA7280_MEM_CTL1, &val); + if (error) + return error; + + return regmap_bulk_write(haptics->regmap, val, + haptics->snp_mem, DA7280_SNP_MEM_MAX - val + 1); +} + +static int da7280_haptic_set_pwm(struct da7280_haptic *haptics, bool enabled) +{ + struct pwm_state state; + u64 period_mag_multi; + int error; + + if (!haptics->gain && enabled) { + dev_err(haptics->dev, + "Please set the gain first for the pwm mode\n"); + return -EINVAL; + } + + pwm_get_state(haptics->pwm_dev, &state); + state.enabled = enabled; + if (enabled) { + period_mag_multi = (u64)state.period * haptics->gain; + period_mag_multi >>= MAX_MAGNITUDE_SHIFT; + + /* + * The interpretation of duty cycle depends on the acc_en, + * it should be between 50% and 100% for acc_en = 0. + * See datasheet 'PWM mode' section. + */ + if (!haptics->acc_en) { + period_mag_multi += state.period; + period_mag_multi /= 2; + } + + state.duty_cycle = period_mag_multi; + } + + error = pwm_apply_state(haptics->pwm_dev, &state); + if (error) + dev_err(haptics->dev, "failed to apply pwm state: %pe\n", + ERR_PTR(error)); + + return error; +} + +static void da7280_haptic_enable(struct da7280_haptic *haptics) +{ + int error = 0; + + if (haptics->enabled) + return; + + switch (haptics->op_mode) { + case DA7280_DRO_MODE: + /* the valid range check when acc_en is enabled */ + if (haptics->acc_en && haptics->level > 0x7F) + haptics->level = 0x7F; + else if (haptics->level > 0xFF) + haptics->level = 0xFF; + + /* Set level as a % of ACTUATOR_NOMMAX(nommax) */ + error = regmap_write(haptics->regmap, + DA7280_TOP_CTL2, + haptics->level); + if (error) { + dev_err(haptics->dev, + "i2c err (%d) for driving level (%d)\n", + error, haptics->level); + return; + } + break; + case DA7280_PWM_MODE: + if (da7280_haptic_set_pwm(haptics, true)) + return; + break; + case DA7280_RTWM_MODE: + /* + * The pattern will be played by + * the PS_SEQ_ID and the PS_SEQ_LOOP + */ + case DA7280_ETWM_MODE: + /* + * The pattern will be played by + * the GPI[N] state, GPI(N)_SEQUENCE_ID + * and the PS_SEQ_LOOP. + * please see the datasheet for the details. + */ + break; + default: + dev_err(haptics->dev, + "Invalid Mode(%d)\n", haptics->op_mode); + return; + } + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_OPERATION_MODE_MASK, + haptics->op_mode); + if (error) { + dev_err(haptics->dev, + "op_mode i2c err: %d\n", error); + return; + } + + if (haptics->op_mode == DA7280_PWM_MODE || + haptics->op_mode == DA7280_RTWM_MODE) { + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_SEQ_START_MASK, + DA7280_SEQ_START_MASK); + if (error) { + dev_err(haptics->dev, + "i2c err for sequence triggering: %d\n", + error); + return; + } + } + + haptics->enabled = true; + if (haptics->length_ms && haptics->op_mode <= DA7280_PWM_MODE) + schedule_delayed_work(&haptics->work_duration, + msecs_to_jiffies(haptics->length_ms)); +} + +static void da7280_haptic_disable(struct da7280_haptic *haptics) +{ + int error; + + if (!haptics->enabled) + return; + + /* Set to Inactive mode */ + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_OPERATION_MODE_MASK, 0); + if (error) { + dev_err(haptics->dev, + "i2c err for op_mode off: %d\n", error); + return; + } + + switch (haptics->op_mode) { + case DA7280_DRO_MODE: + error = regmap_write(haptics->regmap, + DA7280_TOP_CTL2, 0); + if (error) { + dev_err(haptics->dev, + "i2c err for DRO mode off: %d\n", + error); + return; + } + break; + case DA7280_PWM_MODE: + if (da7280_haptic_set_pwm(haptics, false)) + return; + break; + case DA7280_RTWM_MODE: + case DA7280_ETWM_MODE: + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_SEQ_START_MASK, 0); + if (error) { + dev_err(haptics->dev, + "i2c err for RTWM or ETWM mode off: %d\n", + error); + return; + } + break; + default: + dev_err(haptics->dev, + "Invalid Mode(%d)\n", haptics->op_mode); + return; + } + + haptics->enabled = false; +} + +static void da7280_haptic_work_duration(struct work_struct *work) +{ + struct da7280_haptic *haptics = + container_of(work, struct da7280_haptic, work_duration.work); + + da7280_haptic_disable(haptics); +} + +static void da7280_haptic_work_playback(struct work_struct *work) +{ + struct da7280_haptic *haptics = + container_of(work, struct da7280_haptic, work_playback); + int val = haptics->val; + + if (!!val) + da7280_haptic_enable(haptics); + else + da7280_haptic_disable(haptics); +} + +static void da7280_haptic_work_setgain(struct work_struct *work) +{ + struct da7280_haptic *haptics = + container_of(work, struct da7280_haptic, work_setgain); + u16 gain = haptics->new_gain; + int error = 0; + + if (gain == 0) + return; + + /* DRO and PWM modes support set_gain feature */ + switch (haptics->op_mode) { + case DA7280_DRO_MODE: + if (haptics->acc_en == 1) { + haptics->level = (u8)(gain * 0x7F / 0x7fff); + } else if (haptics->acc_en == 0) { + haptics->level = (u8)(gain * 0xFF / 0x7fff); + + if (gain <= 0x3FFF) + haptics->level = haptics->level + 0x80; + else if (gain > 0x3FFF) + haptics->level = haptics->level - 0x80; + } else { + dev_err(haptics->dev, "Invalid acc_en %d.\n", + haptics->acc_en); + } + + /* Set level as a % of ACTUATOR_NOMMAX(nommax) */ + error = regmap_write(haptics->regmap, + DA7280_TOP_CTL2, + haptics->level); + if (error) { + dev_err(haptics->dev, + "i2c err for driving level set: %d\n", + error); + return; + } + break; + case DA7280_PWM_MODE: + haptics->gain = gain; + if (haptics->enabled) { + if (da7280_haptic_set_pwm(haptics, true)) + return; + } + break; + default: + dev_err(haptics->dev, + "Invalid Mode(%d). Change to DRM (Constant) mode.\n", + haptics->op_mode); + break; + } + haptics->new_gain = 0; +} + +static int da7280_haptics_upload_effect(struct input_dev *dev, + struct ff_effect *effect, + struct ff_effect *old) +{ + struct da7280_haptic *haptics = input_get_drvdata(dev); + s16 data[DA7280_SNP_MEM_SIZE] = {0,}; + unsigned int val; + int tmp, i, num; + int error; + + switch (effect->type) { + /* DRO/PWM modes support this type */ + case FF_CONSTANT: + haptics->op_mode = haptics->const_op_mode; + /* effect->replay.length should be ms base */ + haptics->length_ms = effect->replay.length; + if (haptics->op_mode == DA7280_DRO_MODE) { + tmp = effect->u.constant.level * 254; + haptics->level = tmp / 0x7FFF; + break; + } + + haptics->gain = (effect->u.constant.level <= 0) ? + 0 : effect->u.constant.level; + break; + + /* RTWM/ETWM modes support this type */ + case FF_PERIODIC: + if (effect->u.periodic.waveform != FF_CUSTOM) { + dev_err(haptics->dev, + "Only accept FF_CUSTOM type\n"); + return -EINVAL; + } + + /* + * Load the data and check the length. + * the data will be patterns in this case: 4 < X <= 100, + * and will be saved into the waveform memory inside DA728x. + * If X = 2, the data will be PS_SEQ_ID and PS_SEQ_LOOP. + * If X = 3, the 1st data will be GPIX_SEQUENCE_ID . + */ + if (effect->u.periodic.custom_len == DA7280_CUSTOM_DATA_LEN) + goto set_seq_id_loop; + + if (effect->u.periodic.custom_len == DA7280_CUSTOM_GP_DATA_LEN) + goto set_gpix_seq_id; + + if (effect->u.periodic.custom_len < DA7280_CUSTOM_DATA_LEN || + effect->u.periodic.custom_len > DA7280_SNP_MEM_SIZE) { + dev_err(haptics->dev, "Invalid data size\n"); + return -EINVAL; + } + + if (copy_from_user(data, effect->u.periodic.custom_data, + sizeof(s16) * + effect->u.periodic.custom_len)) { + dev_err(haptics->dev, "custom data load error\n"); + return -EFAULT; + } + + memset(haptics->snp_mem, 0, DA7280_SNP_MEM_SIZE); + + for (i = 0; i < effect->u.periodic.custom_len; i++) { + if (data[i] <= 0xff && data[i] >= 0) { + haptics->snp_mem[i] = (u8)data[i]; + } else { + dev_err(haptics->dev, + "Invalid data in the custom data\n"); + return -EINVAL; + } + } + + error = da7280_haptic_mem_update(haptics); + if (error) { + dev_err(haptics->dev, + "mem update error: %d\n", error); + return error; + } + break; + +set_seq_id_loop: + if (copy_from_user(data, effect->u.periodic.custom_data, + sizeof(s16) * DA7280_CUSTOM_DATA_LEN)) { + dev_err(haptics->dev, + "custom id/loop load error\n"); + return -EFAULT; + } + + if (data[DA7280_CUSTOM_SEQ_ID_IDX] < 0 || + data[DA7280_CUSTOM_SEQ_ID_IDX] > DA7280_SEQ_ID_MAX || + data[DA7280_CUSTOM_SEQ_LOOP_IDX] < 0 || + data[DA7280_CUSTOM_SEQ_LOOP_IDX] > DA7280_SEQ_LOOP_MAX) { + dev_err(haptics->dev, "Invalid custom id/loop\n"); + return -EINVAL; + } + haptics->ps_seq_id = + data[DA7280_CUSTOM_SEQ_ID_IDX] & 0x0f; + haptics->ps_seq_loop = + data[DA7280_CUSTOM_SEQ_LOOP_IDX] & 0x0f; + haptics->op_mode = haptics->periodic_op_mode; + + val = FIELD_PREP(DA7280_PS_SEQ_ID_MASK, haptics->ps_seq_id) | + FIELD_PREP(DA7280_PS_SEQ_LOOP_MASK, + haptics->ps_seq_loop); + error = regmap_write(haptics->regmap, + DA7280_SEQ_CTL2, val); + if (error) { + dev_err(haptics->dev, + "Upload effect, custom i2c err: %d\n", + error); + return error; + } + break; + +set_gpix_seq_id: + if (copy_from_user(data, effect->u.periodic.custom_data, + sizeof(s16) * DA7280_CUSTOM_GP_DATA_LEN)) { + dev_err(haptics->dev, + "custom gpi id load error\n"); + return -EFAULT; + } + + if (data[DA7280_CUSTOM_GPI_SEQ_ID_IDX] < 0 || + data[DA7280_CUSTOM_GPI_SEQ_ID_IDX] > DA7280_SEQ_ID_MAX || + data[DA7280_CUSTOM_GPI_NUM_IDX] < 0 || + data[DA7280_CUSTOM_GPI_NUM_IDX] > DA7280_GPI_SEQ_ID_MAX) { + dev_err(haptics->dev, + "Invalid custom GPI id/loop\n"); + return -EINVAL; + } + + num = data[DA7280_CUSTOM_GPI_NUM_IDX] & 0x0f; + haptics->gpi_ctl[num].seq_id = + data[DA7280_CUSTOM_GPI_SEQ_ID_IDX] & 0x0f; + + haptics->op_mode = haptics->periodic_op_mode; + + val = FIELD_PREP(DA7280_GPI0_SEQUENCE_ID_MASK, + haptics->gpi_ctl[num].seq_id); + error = regmap_update_bits(haptics->regmap, + DA7280_GPI_0_CTL + num, + DA7280_GPI0_SEQUENCE_ID_MASK, + val); + if (error) { + dev_err(haptics->dev, + "Upload effect, custom gpi i2c err: %d\n", + error); + return error; + } + break; + + default: + dev_err(haptics->dev, "Unsupported effect type: %d\n", + effect->type); + return -EINVAL; + } + + return 0; +} + +static int da7280_haptics_playback(struct input_dev *dev, + int effect_id, int val) +{ + struct da7280_haptic *haptics = input_get_drvdata(dev); + + if (!haptics->op_mode) { + dev_warn(haptics->dev, + "No effects have been uploaded\n"); + return -EINVAL; + } + cancel_delayed_work_sync(&haptics->work_duration); + cancel_work_sync(&haptics->work_playback); + + haptics->val = val; + schedule_work(&haptics->work_playback); + + return 0; +} + +static void da7280_haptics_set_gain(struct input_dev *dev, u16 gain) +{ + struct da7280_haptic *haptics = input_get_drvdata(dev); + + cancel_work_sync(&haptics->work_setgain); + + haptics->new_gain = gain > 0x7fff ? 0x7fff : gain; + + schedule_work(&haptics->work_setgain); +} + +static int da7280_haptic_open(struct input_dev *dev) +{ + struct da7280_haptic *haptics = input_get_drvdata(dev); + int error; + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_STANDBY_EN_MASK, + DA7280_STANDBY_EN_MASK); + if (error) + dev_err(haptics->dev, + "Failed to open haptic, i2c err: %d\n", + error); + + return error; +} + +static void da7280_haptic_close(struct input_dev *dev) +{ + struct da7280_haptic *haptics = input_get_drvdata(dev); + int error; + + cancel_delayed_work_sync(&haptics->work_duration); + cancel_work_sync(&haptics->work_playback); + cancel_work_sync(&haptics->work_setgain); + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_OPERATION_MODE_MASK, 0); + if (error) + goto error_i2c; + + if (haptics->op_mode == DA7280_DRO_MODE) { + error = regmap_write(haptics->regmap, + DA7280_TOP_CTL2, 0); + + if (error) + goto error_i2c; + } + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_STANDBY_EN_MASK, 0); + if (error) + goto error_i2c; + + return; + +error_i2c: + dev_err(haptics->dev, "DA7280-haptic i2c err: %d\n", error); +} + +static u8 da7280_haptic_of_mode_str(struct device *dev, + const char *str) +{ + if (!strcmp(str, "LRA")) + return DA7280_LRA; + else if (!strcmp(str, "ERM-bar")) + return DA7280_ERM_BAR; + else if (!strcmp(str, "ERM-coin")) + return DA7280_ERM_COIN; + + dev_warn(dev, "Invalid string - set to LRA\n"); + return DA7280_LRA; +} + +static u8 da7280_haptic_of_gpi_mode_str(struct device *dev, + const char *str) +{ + if (!strcmp(str, "Single-pattern")) + return 0; + else if (!strcmp(str, "Multi-pattern")) + return 1; + + dev_warn(dev, "Invalid string - set to Single-pattern\n"); + return 0; +} + +static u8 da7280_haptic_of_gpi_pol_str(struct device *dev, + const char *str) +{ + if (!strcmp(str, "Rising-edge")) + return 0; + else if (!strcmp(str, "Falling-edge")) + return 1; + else if (!strcmp(str, "Both-edge")) + return 2; + + dev_warn(dev, "Invalid string - set to Rising-edge\n"); + return 0; +} + +static u8 da7280_haptic_of_volt_rating_set(u32 val) +{ + u32 voltage; + + voltage = val / DA7280_VOLTAGE_RATE_STEP + 1; + + if (voltage > 0xFF) + return 0xFF; + return (u8)voltage; +} + +static void da7280_parse_properties(struct device *dev, + struct da7280_haptic *haptics) +{ + unsigned int i, mem[DA7280_SNP_MEM_SIZE]; + char gpi_str1[] = "dlg,gpi0-seq-id"; + char gpi_str2[] = "dlg,gpi0-mode"; + char gpi_str3[] = "dlg,gpi0-polarity"; + const char *str; + u32 val; + + if (!device_property_read_string(dev, "dlg,actuator-type", &str)) + haptics->dev_type = + da7280_haptic_of_mode_str(dev, str); + else /* if no property, then use the mode inside chip */ + haptics->dev_type = DA7280_DEV_MAX; + + if (device_property_read_u32(dev, "dlg,const-op-mode", &val) >= 0) + if (val == DA7280_FF_PERIODIC_PWM) + haptics->const_op_mode = DA7280_PWM_MODE; + else + haptics->const_op_mode = DA7280_DRO_MODE; + else + haptics->const_op_mode = DA7280_DRO_MODE; + + if (device_property_read_u32(dev, "dlg,periodic-op-mode", &val) >= 0) + if (val == DA7280_FF_PERIODIC_ETWM) + haptics->periodic_op_mode = DA7280_ETWM_MODE; + else + haptics->periodic_op_mode = DA7280_RTWM_MODE; + else + haptics->periodic_op_mode = DA7280_RTWM_MODE; + + if (device_property_read_u32(dev, "dlg,nom-microvolt", &val) >= 0) + if (val < DA7280_VOLTAGE_RATE_MAX) + haptics->nommax = + da7280_haptic_of_volt_rating_set(val); + else + haptics->nommax = DA7280_SKIP_INIT; + else /* if no property, then use the value inside chip */ + haptics->nommax = DA7280_SKIP_INIT; + + if (device_property_read_u32(dev, "dlg,abs-max-microvolt", + &val) >= 0) + if (val < DA7280_VOLTAGE_RATE_MAX) + haptics->absmax = + da7280_haptic_of_volt_rating_set(val); + else + haptics->absmax = DA7280_SKIP_INIT; + else + haptics->absmax = DA7280_SKIP_INIT; + + if (device_property_read_u32(dev, "dlg,imax-microamp", &val) >= 0) + if (val < DA7280_IMAX_LIMIT) + haptics->imax = (val - 28600) + / DA7280_IMAX_STEP + 1; + else + haptics->imax = DA7280_IMAX_DEFAULT; + else + haptics->imax = DA7280_IMAX_DEFAULT; + + if (device_property_read_u32(dev, "dlg,impd-micro-ohms", &val) >= 0) + if (val <= DA7280_IMPD_MAX) + haptics->impd = val; + else + haptics->impd = DA7280_IMPD_DEFAULT; + else + haptics->impd = DA7280_IMPD_DEFAULT; + + if (device_property_read_u32(dev, "dlg,resonant-freq-hz", + &val) >= 0) { + if (val < DA7280_MAX_RESONAT_FREQ_HZ && + val > DA7280_MIN_RESONAT_FREQ_HZ) { + haptics->resonant_freq_h = + ((1000000000 / (val * 1333)) >> 7) & 0xFF; + haptics->resonant_freq_l = + (1000000000 / (val * 1333)) & 0x7F; + } else { + haptics->resonant_freq_h = + DA7280_RESONT_FREQH_DFT; + haptics->resonant_freq_l = + DA7280_RESONT_FREQL_DFT; + } + } else { + haptics->resonant_freq_h = DA7280_SKIP_INIT; + haptics->resonant_freq_l = DA7280_SKIP_INIT; + } + + if (device_property_read_u32(dev, "dlg,ps-seq-id", &val) >= 0) + if (val <= DA7280_SEQ_ID_MAX) + haptics->ps_seq_id = val; + else + haptics->ps_seq_id = 0; + else /* if no property, set to zero as a default do nothing */ + haptics->ps_seq_id = 0; + + if (device_property_read_u32(dev, "dlg,ps-seq-loop", &val) >= 0) + if (val <= DA7280_SEQ_LOOP_MAX) + haptics->ps_seq_loop = val; + else + haptics->ps_seq_loop = 0; + else /* if no property, then do nothing */ + haptics->ps_seq_loop = 0; + + /* GPI0~2 Control */ + for (i = 0; i <= DA7280_GPI_SEQ_ID_MAX; i++) { + gpi_str1[7] = '0' + i; + if (device_property_read_u32 (dev, gpi_str1, &val) >= 0) + if (val <= DA7280_SEQ_ID_MAX) + haptics->gpi_ctl[i].seq_id = val; + else + haptics->gpi_ctl[i].seq_id = + DA7280_GPI_SEQ_ID_DFT + i; + else /* if no property, then do nothing */ + haptics->gpi_ctl[i].seq_id = + DA7280_GPI_SEQ_ID_DFT + i; + + gpi_str2[7] = '0' + i; + if (!device_property_read_string(dev, gpi_str2, &str)) + haptics->gpi_ctl[i].mode = + da7280_haptic_of_gpi_mode_str(dev, str); + else + haptics->gpi_ctl[i].mode = 0; + + gpi_str3[7] = '0' + i; + if (!device_property_read_string(dev, gpi_str3, &str)) + haptics->gpi_ctl[i].polarity = + da7280_haptic_of_gpi_pol_str(dev, str); + else + haptics->gpi_ctl[i].polarity = 0; + } + + haptics->bemf_sense_en = + device_property_read_bool(dev, "dlg,bemf-sens-enable"); + haptics->freq_track_en = + device_property_read_bool(dev, "dlg,freq-track-enable"); + haptics->acc_en = + device_property_read_bool(dev, "dlg,acc-enable"); + haptics->rapid_stop_en = + device_property_read_bool(dev, "dlg,rapid-stop-enable"); + haptics->amp_pid_en = + device_property_read_bool(dev, "dlg,amp-pid-enable"); + + if (device_property_read_u32_array(dev, "dlg,mem-array", + &mem[0], + DA7280_SNP_MEM_SIZE) >= 0) { + haptics->mem_update = true; + memset(haptics->snp_mem, 0, DA7280_SNP_MEM_SIZE); + for (i = 0; i < DA7280_SNP_MEM_SIZE; i++) { + if (mem[i] <= 0xff) { + haptics->snp_mem[i] = (u8)mem[i]; + } else { + dev_err(haptics->dev, + "Invalid data in mem-array\n"); + haptics->mem_update = false; + break; + } + } + } else { + haptics->mem_update = false; + } +} + +static irqreturn_t da7280_irq_handler(int irq, void *data) +{ + struct da7280_haptic *haptics = data; + struct device *dev = haptics->dev; + u8 events[IRQ_NUM]; + int error; + + /* Check what events have happened */ + error = regmap_bulk_read(haptics->regmap, + DA7280_IRQ_EVENT1, + events, IRQ_NUM); + if (error) + goto error_i2c; + + /* Clear events */ + error = regmap_write(haptics->regmap, + DA7280_IRQ_EVENT1, events[0]); + if (error) + goto error_i2c; + + if (events[0] & DA7280_E_SEQ_FAULT_MASK) { + /* + * Stop first if Haptic is working + * Otherwise, the fault may happen continually + * even though the bit is cleared. + */ + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_OPERATION_MODE_MASK, 0); + if (error) + goto error_i2c; + } + + if (events[0] & DA7280_E_SEQ_DONE_MASK) + haptics->enabled = false; + + if (events[0] & DA7280_E_WARNING_MASK) { + if (events[1] & DA7280_E_LIM_DRIVE_MASK || + events[1] & DA7280_E_LIM_DRIVE_ACC_MASK) + dev_warn(dev, "Please reduce the driver level\n"); + if (events[1] & DA7280_E_MEM_TYPE_MASK) + dev_warn(dev, "Please check the mem data format\n"); + if (events[1] & DA7280_E_OVERTEMP_WARN_MASK) + dev_warn(dev, "Over-temperature warning\n"); + } + + if (events[0] & DA7280_E_SEQ_FAULT_MASK) { + if (events[2] & DA7280_E_SEQ_ID_FAULT_MASK) + dev_info(dev, "Please reload PS_SEQ_ID & mem data\n"); + if (events[2] & DA7280_E_MEM_FAULT_MASK) + dev_info(dev, "Please reload the mem data\n"); + if (events[2] & DA7280_E_PWM_FAULT_MASK) + dev_info(dev, "Please restart PWM interface\n"); + } + + return IRQ_HANDLED; + +error_i2c: + dev_err(dev, "da7280 i2c err: %d\n", error); + return IRQ_NONE; +} + +static int da7280_init(struct da7280_haptic *haptics) +{ + unsigned int val = 0; + u32 v2i_factor; + int error, i; + u8 mask = 0; + + /* + * If device type is DA7280_DEV_MAX, + * then just use default value inside chip. + */ + if (haptics->dev_type == DA7280_DEV_MAX) { + error = regmap_read(haptics->regmap, DA7280_TOP_CFG1, &val); + if (error) + goto error_i2c; + if (val & DA7280_ACTUATOR_TYPE_MASK) + haptics->dev_type = DA7280_ERM_COIN; + else + haptics->dev_type = DA7280_LRA; + } + + /* Apply user settings */ + if (haptics->dev_type == DA7280_LRA) { + if (haptics->resonant_freq_l != DA7280_SKIP_INIT) { + error = regmap_write(haptics->regmap, + DA7280_FRQ_LRA_PER_H, + haptics->resonant_freq_h); + if (error) + goto error_i2c; + error = regmap_write(haptics->regmap, + DA7280_FRQ_LRA_PER_L, + haptics->resonant_freq_l); + if (error) + goto error_i2c; + } + } else if (haptics->dev_type == DA7280_ERM_COIN) { + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_INT_CFG1, + DA7280_BEMF_FAULT_LIM_MASK, 0); + if (error) + goto error_i2c; + + mask = DA7280_TST_CALIB_IMPEDANCE_DIS_MASK | + DA7280_V2I_FACTOR_FREEZE_MASK; + val = DA7280_TST_CALIB_IMPEDANCE_DIS_MASK | + DA7280_V2I_FACTOR_FREEZE_MASK; + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CFG4, + mask, val); + if (error) + goto error_i2c; + + haptics->acc_en = false; + haptics->rapid_stop_en = false; + haptics->amp_pid_en = false; + } + + mask = DA7280_ACTUATOR_TYPE_MASK | + DA7280_BEMF_SENSE_EN_MASK | + DA7280_FREQ_TRACK_EN_MASK | + DA7280_ACCELERATION_EN_MASK | + DA7280_RAPID_STOP_EN_MASK | + DA7280_AMP_PID_EN_MASK; + val = FIELD_PREP(DA7280_ACTUATOR_TYPE_MASK, + (haptics->dev_type ? 1 : 0)) | + FIELD_PREP(DA7280_BEMF_SENSE_EN_MASK, + (haptics->bemf_sense_en ? 1 : 0)) | + FIELD_PREP(DA7280_FREQ_TRACK_EN_MASK, + (haptics->freq_track_en ? 1 : 0)) | + FIELD_PREP(DA7280_ACCELERATION_EN_MASK, + (haptics->acc_en ? 1 : 0)) | + FIELD_PREP(DA7280_RAPID_STOP_EN_MASK, + (haptics->rapid_stop_en ? 1 : 0)) | + FIELD_PREP(DA7280_AMP_PID_EN_MASK, + (haptics->amp_pid_en ? 1 : 0)); + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CFG1, mask, val); + if (error) + goto error_i2c; + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CFG5, + DA7280_V2I_FACTOR_OFFSET_EN_MASK, + haptics->acc_en ? + DA7280_V2I_FACTOR_OFFSET_EN_MASK : 0); + if (error) + goto error_i2c; + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CFG2, + DA7280_MEM_DATA_SIGNED_MASK, + haptics->acc_en ? + 0 : DA7280_MEM_DATA_SIGNED_MASK); + if (error) + goto error_i2c; + + if (haptics->nommax != DA7280_SKIP_INIT) { + error = regmap_write(haptics->regmap, + DA7280_ACTUATOR1, + haptics->nommax); + if (error) + goto error_i2c; + } + + if (haptics->absmax != DA7280_SKIP_INIT) { + error = regmap_write(haptics->regmap, DA7280_ACTUATOR2, + haptics->absmax); + if (error) + goto error_i2c; + } + + error = regmap_update_bits(haptics->regmap, + DA7280_ACTUATOR3, + DA7280_IMAX_MASK, + haptics->imax); + if (error) + goto error_i2c; + + v2i_factor = + haptics->impd * (haptics->imax + 4) / 1610400; + error = regmap_write(haptics->regmap, + DA7280_CALIB_V2I_L, + v2i_factor & 0xff); + if (error) + goto error_i2c; + error = regmap_write(haptics->regmap, + DA7280_CALIB_V2I_H, + v2i_factor >> 8); + if (error) + goto error_i2c; + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_STANDBY_EN_MASK, + DA7280_STANDBY_EN_MASK); + if (error) + goto error_i2c; + + if (haptics->mem_update) { + error = da7280_haptic_mem_update(haptics); + if (error) + goto error_i2c; + } + + /* Set PS_SEQ_ID and PS_SEQ_LOOP */ + val = FIELD_PREP(DA7280_PS_SEQ_ID_MASK, haptics->ps_seq_id) | + FIELD_PREP(DA7280_PS_SEQ_LOOP_MASK, haptics->ps_seq_loop); + error = regmap_write(haptics->regmap, + DA7280_SEQ_CTL2, val); + if (error) + goto error_i2c; + + /* GPI(N) CTL */ + for (i = 0; i < 3; i++) { + val = FIELD_PREP(DA7280_GPI0_SEQUENCE_ID_MASK, + haptics->gpi_ctl[i].seq_id) | + FIELD_PREP(DA7280_GPI0_MODE_MASK, + haptics->gpi_ctl[i].mode) | + FIELD_PREP(DA7280_GPI0_POLARITY_MASK, + haptics->gpi_ctl[i].polarity); + error = regmap_write(haptics->regmap, + DA7280_GPI_0_CTL + i, val); + if (error) + goto error_i2c; + } + + /* Mask ADC_SAT_M bit as default */ + error = regmap_update_bits(haptics->regmap, + DA7280_IRQ_MASK2, + DA7280_ADC_SAT_M_MASK, + DA7280_ADC_SAT_M_MASK); + if (error) + goto error_i2c; + + /* Clear Interrupts */ + error = regmap_write(haptics->regmap, DA7280_IRQ_EVENT1, 0xff); + if (error) + goto error_i2c; + + error = regmap_update_bits(haptics->regmap, + DA7280_IRQ_MASK1, + DA7280_SEQ_FAULT_M_MASK + | DA7280_SEQ_DONE_M_MASK, 0); + if (error) + goto error_i2c; + + haptics->enabled = false; + return 0; + +error_i2c: + dev_err(haptics->dev, + "haptic init - i2c err: %d\n", error); + return error; +} + +static int da7280_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct da7280_haptic *haptics; + struct input_dev *input_dev; + struct pwm_state state; + struct ff_device *ff; + int error; + + haptics = devm_kzalloc(dev, sizeof(*haptics), GFP_KERNEL); + if (!haptics) + return -ENOMEM; + haptics->dev = dev; + + if (!client->irq) { + dev_err(dev, "No IRQ configured\n"); + return -EINVAL; + } + + da7280_parse_properties(dev, haptics); + + if (haptics->const_op_mode == DA7280_PWM_MODE) { + haptics->pwm_dev = devm_pwm_get(dev, NULL); + if (IS_ERR(haptics->pwm_dev)) { + error = PTR_ERR(haptics->pwm_dev); + if (error != -EPROBE_DEFER) + dev_err(dev, "unable to request PWM: %pe\n", + ERR_PTR(error)); + return error; + } + + /* Sync up PWM state and ensure it is off. */ + pwm_init_state(haptics->pwm_dev, &state); + state.enabled = false; + error = pwm_apply_state(haptics->pwm_dev, &state); + if (error) { + dev_err(dev, + "failed to apply initial PWM state: %pe\n", + ERR_PTR(error)); + return error; + } + + /* + * Check PWM period, PWM freq = 1000000 / state.period. + * The valid PWM freq range: 10k ~ 250kHz. + */ + if (state.period > 100000 || state.period < 4000) { + dev_err(dev, "Unsupported PWM period (%u)\n", + state.period); + return -EINVAL; + } + } + + INIT_DELAYED_WORK(&haptics->work_duration, da7280_haptic_work_duration); + INIT_WORK(&haptics->work_playback, da7280_haptic_work_playback); + INIT_WORK(&haptics->work_setgain, da7280_haptic_work_setgain); + + haptics->client = client; + i2c_set_clientdata(client, haptics); + + haptics->regmap = + devm_regmap_init_i2c(client, &da7280_haptic_regmap_config); + if (IS_ERR(haptics->regmap)) { + error = PTR_ERR(haptics->regmap); + dev_err(dev, "Failed to allocate register map: %d\n", + error); + return error; + } + + error = da7280_init(haptics); + if (error) { + dev_err(dev, "failed to initialize device\n"); + return error; + } + + /* Initialize input device for haptic device */ + input_dev = devm_input_allocate_device(dev); + if (!input_dev) { + dev_err(dev, "failed to allocate input device\n"); + return -ENOMEM; + } + + input_dev->name = "da7280-haptic"; + input_dev->dev.parent = client->dev.parent; + input_dev->open = da7280_haptic_open; + input_dev->close = da7280_haptic_close; + input_set_drvdata(input_dev, haptics); + haptics->input_dev = input_dev; + + input_set_capability(haptics->input_dev, EV_FF, FF_PERIODIC); + input_set_capability(haptics->input_dev, EV_FF, FF_CUSTOM); + input_set_capability(haptics->input_dev, EV_FF, FF_CONSTANT); + input_set_capability(haptics->input_dev, EV_FF, FF_GAIN); + + error = input_ff_create(haptics->input_dev, DA7280_FF_EFFECT_COUNT_MAX); + if (error) { + dev_err(dev, "create FF input device failed: %d\n", + error); + return error; + } + + ff = input_dev->ff; + ff->upload = da7280_haptics_upload_effect; + ff->playback = da7280_haptics_playback; + ff->set_gain = da7280_haptics_set_gain; + + error = input_register_device(input_dev); + if (error) { + dev_err(dev, "failed to register input device\n"); + return error; + } + + error = devm_request_threaded_irq(dev, client->irq, NULL, + da7280_irq_handler, + IRQF_ONESHOT, + "da7280-haptics", haptics); + if (error) + dev_err(dev, "Failed to request IRQ: %d\n", error); + + return error; +} + +static int __maybe_unused da7280_suspend(struct device *dev) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + int error = 0; + + mutex_lock(&haptics->input_dev->mutex); + + da7280_haptic_disable(haptics); + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_STANDBY_EN_MASK, 0); + if (error) + dev_err(haptics->dev, "i2c err: %d\n", error); + + mutex_unlock(&haptics->input_dev->mutex); + return error; +} + +static int __maybe_unused da7280_resume(struct device *dev) +{ + struct da7280_haptic *haptics = dev_get_drvdata(dev); + int error = 0; + + mutex_lock(&haptics->input_dev->mutex); + + error = regmap_update_bits(haptics->regmap, + DA7280_TOP_CTL1, + DA7280_STANDBY_EN_MASK, + DA7280_STANDBY_EN_MASK); + if (error) + dev_err(haptics->dev, "i2c err: %d\n", error); + + mutex_unlock(&haptics->input_dev->mutex); + return error; +} + +static const struct of_device_id da7280_of_match[] = { + { .compatible = "dlg,da7280", }, + { } +}; +MODULE_DEVICE_TABLE(of, da7280_of_match); + +static const struct i2c_device_id da7280_i2c_id[] = { + { "da7280", }, + { } +}; +MODULE_DEVICE_TABLE(i2c, da7280_i2c_id); + +static SIMPLE_DEV_PM_OPS(da7280_pm_ops, + da7280_suspend, da7280_resume); + +static struct i2c_driver da7280_driver = { + .driver = { + .name = "da7280", + .of_match_table = of_match_ptr(da7280_of_match), + .pm = &da7280_pm_ops, + }, + .probe = da7280_probe, + .id_table = da7280_i2c_id, +}; +module_i2c_driver(da7280_driver); + +MODULE_DESCRIPTION("DA7280 haptics driver"); +MODULE_AUTHOR("Roy Im "); +MODULE_LICENSE("GPL");