From patchwork Tue Sep 15 11:00:47 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Grzegorz Jaszczyk X-Patchwork-Id: 256539 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-12.8 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH, MAILING_LIST_MULTI, SIGNED_OFF_BY, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 48540C433E2 for ; Wed, 16 Sep 2020 00:52:10 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id F005220936 for ; Wed, 16 Sep 2020 00:52:09 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="izx0IJCa" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726339AbgIPAwG (ORCPT ); Tue, 15 Sep 2020 20:52:06 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:34980 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726134AbgIOLdD (ORCPT ); Tue, 15 Sep 2020 07:33:03 -0400 Received: from mail-lj1-x243.google.com (mail-lj1-x243.google.com [IPv6:2a00:1450:4864:20::243]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id AC47FC061797 for ; Tue, 15 Sep 2020 04:01:19 -0700 (PDT) Received: by mail-lj1-x243.google.com with SMTP id v23so2450930ljd.1 for ; Tue, 15 Sep 2020 04:01:19 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=1krlOFwt5acv4dNUHBiS7KyeuG27QFnb15CGGHeer8k=; b=izx0IJCaUtyiDgxO81wLKP35PoPsTAIVFTd4O+4QTFfVKnlIx7ztx81A+6Mq3wk4vr AZUx3n30JPkkFhhLyCPg+YxLoFe37ObDV6cTLOPVIMSQnMLd4OlTNuED1asdQD3hQ9qh 3i4ngbBuotUFwIVFzSZRLsHizUTTPqoYxwQWTLzRp/LzyAi8HZxCZ3EcxRqH+AhS9J3p g8Ts6e71CqwbEY3+G3ek4Ivl6hK7gY8OHRkR6/uyhlfe+/mPsuKh4iPds2fHINjEb5AN 1ga/iBzH2AssRZMX46iD2zB96ht79RnFhzLI2HMZMQUXHKeR6CZBUj/nJtQl3nuI2jyo zHYg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=1krlOFwt5acv4dNUHBiS7KyeuG27QFnb15CGGHeer8k=; b=lsOOw/Q/o//XgVUPvHgUGva/E8nh+BunLXhl5LqoG6R1tjVmNIC5uxcFWYai1AvxBv Db5bIYfoXB2jEqA6BenNp/FeqLFAO7GBzQCynNoxq0gc+5Wm5EV3tCEdCOzD5Ro0HCSt TwbdJL6hqbf+QQ2WSoB4wnb4e9GAWEho/nNlEUd2hMVb8SGj+0FLpyVmDXM20FroxgX6 e09CIDsAXq4n/wgsUSdCNStFrj12qirkKyIzEyxL4pc36cj4WtG2gPpjSszCuJjSD/Cb DaveEJ5p8tsmv4X2NAHGd9qIanwnb/5voCRXkjyg6EgcPy+9+PACHptC5rH4E3XjzWgW loPw== X-Gm-Message-State: AOAM530IZT75X0HF+k3X+ANQbYi2CKy5mlX45JCocnBcY84nAMLAVmX5 xEGf+sx+TNPSyQw53ZCbXnuUvg== X-Google-Smtp-Source: ABdhPJxVi/zV7aFcZcd+PdIzW3dOGxLI3LkNIv3k33zJkh1XiaIbM6SQ/nb6VPNoOG7enVIq7oF7ZQ== X-Received: by 2002:a2e:9910:: with SMTP id v16mr5963935lji.59.1600167677976; Tue, 15 Sep 2020 04:01:17 -0700 (PDT) Received: from gilgamesh.semihalf.com (193-106-246-138.noc.fibertech.net.pl. [193.106.246.138]) by smtp.gmail.com with ESMTPSA id n3sm4588916ljj.59.2020.09.15.04.01.16 (version=TLS1_2 cipher=ECDHE-ECDSA-AES128-GCM-SHA256 bits=128/128); Tue, 15 Sep 2020 04:01:17 -0700 (PDT) From: Grzegorz Jaszczyk To: tglx@linutronix.de, jason@lakedaemon.net, maz@kernel.org, s-anna@ti.com Cc: grzegorz.jaszczyk@linaro.org, robh+dt@kernel.org, lee.jones@linaro.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, david@lechnology.com, praneeth@ti.com, "Andrew F . Davis" , Roger Quadros Subject: [PATCH v6 1/5] dt-bindings: irqchip: Add PRU-ICSS interrupt controller bindings Date: Tue, 15 Sep 2020 13:00:47 +0200 Message-Id: <1600167651-20851-2-git-send-email-grzegorz.jaszczyk@linaro.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1600167651-20851-1-git-send-email-grzegorz.jaszczyk@linaro.org> References: <1600167651-20851-1-git-send-email-grzegorz.jaszczyk@linaro.org> Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org From: Suman Anna The Programmable Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS or simply PRUSS) contains an interrupt controller (INTC) that can handle various system input events and post interrupts back to the device-level initiators. The INTC can support up to 64 input events on most SoCs with individual control configuration and h/w prioritization. These events are mapped onto 10 output interrupt lines through two levels of many-to-one mapping support. Different interrupt lines are routed to the individual PRU cores or to the host CPU or to other PRUSS instances. The K3 AM65x and J721E SoCs have the next generation of the PRU-ICSS IP, commonly called ICSSG. The ICSSG interrupt controller on K3 SoCs provide a higher number of host interrupts (20 vs 10) and can handle an increased number of input events (160 vs 64) from various SoC interrupt sources. Add the bindings document for these interrupt controllers on all the applicable SoCs. It covers the OMAP architecture SoCs - AM33xx, AM437x and AM57xx; the Keystone 2 architecture based 66AK2G SoC; the Davinci architecture based OMAPL138 SoCs, and the K3 architecture based AM65x and J721E SoCs. Signed-off-by: Suman Anna Signed-off-by: Andrew F. Davis Signed-off-by: Roger Quadros Signed-off-by: Grzegorz Jaszczyk Reviewed-by: Rob Herring --- v5->v6: - No change. v4->v5: - Fix typo in commit description. - Update interrupt-cells description regarding each cells meaning. v3->v4: - Drop allOf references to interrupt-controller.yaml and interrupts.yaml. - Drop items descriptions and use only maxItems: 1 as suggested by Rob. - Convert irqs-reserved property from uint8-array to bitmask. - Minor descriptions updates. - Change interrupt-cells to 3 in order to provide 2-level mapping description for interrupts routed to the main CPU (as Marc requested). - Merge the irqs-reserved and irqs-shared to one property since they can be handled by one logic. - Drop reviewed-by due to introduced changes. - Add another example illustrating irqs-reserved property usage. v2->v3: - Convert dt-binding to YAML v1->v2: - https://patchwork.kernel.org/patch/11069767/ --- .../interrupt-controller/ti,pruss-intc.yaml | 158 +++++++++++++++++++++ 1 file changed, 158 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml new file mode 100644 index 0000000..bbf79d1 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/ti,pruss-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI PRU-ICSS Local Interrupt Controller + +maintainers: + - Suman Anna + +description: | + Each PRU-ICSS has a single interrupt controller instance that is common + to all the PRU cores. Most interrupt controllers can route 64 input events + which are then mapped to 10 possible output interrupts through two levels + of mapping. The input events can be triggered by either the PRUs and/or + various other PRUSS internal and external peripherals. The first 2 output + interrupts (0, 1) are fed exclusively to the internal PRU cores, with the + remaining 8 (2 through 9) connected to external interrupt controllers + including the MPU and/or other PRUSS instances, DSPs or devices. + + The property "ti,irqs-reserved" is used for denoting the connection + differences on the output interrupts 2 through 9. If this property is not + defined, it implies that all the PRUSS INTC output interrupts 2 through 9 + (host_intr0 through host_intr7) are connected exclusively to the Arm interrupt + controller. + + The K3 family of SoCs can handle 160 input events that can be mapped to 20 + different possible output interrupts. The additional output interrupts (10 + through 19) are connected to new sub-modules within the ICSSG instances. + + This interrupt-controller node should be defined as a child node of the + corresponding PRUSS node. The node should be named "interrupt-controller". + +properties: + compatible: + enum: + - ti,pruss-intc + - ti,icssg-intc + description: | + Use "ti,pruss-intc" for OMAP-L13x/AM18x/DA850 SoCs, + AM335x family of SoCs, + AM437x family of SoCs, + AM57xx family of SoCs + 66AK2G family of SoCs + Use "ti,icssg-intc" for K3 AM65x & J721E family of SoCs + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 8 + description: | + All the interrupts generated towards the main host processor in the SoC. + A shared interrupt can be skipped if the desired destination and usage is + by a different processor/device. + + interrupt-names: + minItems: 1 + maxItems: 8 + items: + pattern: host_intr[0-7] + description: | + Should use one of the above names for each valid host event interrupt + connected to Arm interrupt controller, the name should match the + corresponding host event interrupt number. + + interrupt-controller: true + + "#interrupt-cells": + const: 3 + description: | + Client users shall use the PRU System event number (the interrupt source + that the client is interested in) [cell 1], PRU channel [cell 2] and PRU + host_event (target) [cell 3] as the value of the interrupts property in + their node. The system events can be mapped to some output host + interrupts through 2 levels of many-to-one mapping i.e. events to channel + mapping and channels to host interrupts so through this property entire + mapping is provided. + + ti,irqs-reserved: + $ref: /schemas/types.yaml#definitions/uint8 + description: | + Bitmask of host interrupts between 0 and 7 (corresponding to PRUSS INTC + output interrupts 2 through 9) that are not connected to the Arm interrupt + controller or are shared and used by other devices or processors in the + SoC. Define this property when any of 8 interrupts should not be handled + by Arm interrupt controller. + Eg: - AM437x and 66AK2G SoCs do not have "host_intr5" interrupt + connected to MPU + - AM65x and J721E SoCs have "host_intr5", "host_intr6" and + "host_intr7" interrupts connected to MPU, and other ICSSG + instances. + +required: + - compatible + - reg + - interrupts + - interrupt-names + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: false + +examples: + - | + /* AM33xx PRU-ICSS */ + pruss: pruss@0 { + compatible = "ti,am3356-pruss"; + reg = <0x0 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pruss_intc: interrupt-controller@20000 { + compatible = "ti,pruss-intc"; + reg = <0x20000 0x2000>; + interrupts = <20 21 22 23 24 25 26 27>; + interrupt-names = "host_intr0", "host_intr1", + "host_intr2", "host_intr3", + "host_intr4", "host_intr5", + "host_intr6", "host_intr7"; + interrupt-controller; + #interrupt-cells = <3>; + }; + }; + + - | + + /* AM4376 PRU-ICSS */ + #include + pruss@0 { + compatible = "ti,am4376-pruss"; + reg = <0x0 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + interrupt-controller@20000 { + compatible = "ti,pruss-intc"; + reg = <0x20000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = , + , + , + , + , + , + ; + interrupt-names = "host_intr0", "host_intr1", + "host_intr2", "host_intr3", + "host_intr4", + "host_intr6", "host_intr7"; + ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */ + }; + }; From patchwork Tue Sep 15 11:00:48 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Grzegorz Jaszczyk X-Patchwork-Id: 256538 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-12.8 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH, MAILING_LIST_MULTI, SIGNED_OFF_BY, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9FA10C43461 for ; Wed, 16 Sep 2020 00:57:47 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 49E6A20715 for ; Wed, 16 Sep 2020 00:57:47 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="EMSmQhyi" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726428AbgIPA5k (ORCPT ); Tue, 15 Sep 2020 20:57:40 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:60112 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726142AbgIOLM4 (ORCPT ); Tue, 15 Sep 2020 07:12:56 -0400 Received: from mail-lf1-x143.google.com (mail-lf1-x143.google.com [IPv6:2a00:1450:4864:20::143]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id E9DE1C061353 for ; Tue, 15 Sep 2020 04:01:21 -0700 (PDT) Received: by mail-lf1-x143.google.com with SMTP id q8so2622534lfb.6 for ; Tue, 15 Sep 2020 04:01:21 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=VtDPypusfMd8UBl3Rrt2YpAR/fmPnphWUSgU/MjvQA4=; b=EMSmQhyiD58+7JLYDXCvU9XWrm1E1NgTyoMKi9eiqHtM9U5c8f8qA5LcufBuSPnM1M pSPadjYRZ5RNF9vGETavEuutoAVkf/bQLOnrYn3Nm2GRnSLAQjXPw0LBvkwIpt0pYfYG wYJkGhaova3rPRGODyNZwU/eihh4JQKjdiTwSARHSGao/Vf2RBnA5vW4xQWBvSpFhTnR 2B4o9k6pFLDl793/zu1etgFNtz9re3Bir1Ojo6qzMD9UEk858ZYFXJRSiJaB7UJGdjL1 mMW/Z+3SvfRUi1mSImleZRwLmFa0c/ppojhmLDlI5O1383g0AuTED5k248fv3k8l2AJK 0WUg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=VtDPypusfMd8UBl3Rrt2YpAR/fmPnphWUSgU/MjvQA4=; b=lyG+lcjAHKY4aGD4+chcAP0qRukLpK4G1AnGH/ahnCdGM//5vx6CynPnvBeQQIRRAk +5UaeTivXAPyZW66EgFKssxSUnpSWy+sgL8xds+3rhDkZbodhYjZvDx2hCrwHJYhcXA1 iNm0/R4jcszx2S+cdtbrZgi2ZnErzKj5aUyuNOBWGzKvLPgnObhzYoGjN1iFJNevK6J1 RF5vtH/ERgcdAtfkJF/LArWm29PwUOPdIeIdPEZ3gNx1UMRw/WMkuFdM42upiOPhIA7P gA9oJcnI/8KLzm11UDoglhLqMgkEwADMUMLfclCSgWEtmEfB7CHhRTW8j6Pz870cfdSf ZyUg== X-Gm-Message-State: AOAM532fozOukfJlaZ90jN1t9zgnX1+NlEv1sW79HRyiKM4dJAHrSsEe Bxly+D9y/qeesUl/7IcPqn3lBQ== X-Google-Smtp-Source: ABdhPJxqWupOn8HC+tz6xG9tPqTgcXNZKk95xRBk84R8AkqK2gHHipfimjVuxi7nwEwT/xpI3A2KHQ== X-Received: by 2002:a19:8ac3:: with SMTP id m186mr5217144lfd.478.1600167680096; Tue, 15 Sep 2020 04:01:20 -0700 (PDT) Received: from gilgamesh.semihalf.com (193-106-246-138.noc.fibertech.net.pl. [193.106.246.138]) by smtp.gmail.com with ESMTPSA id n3sm4588916ljj.59.2020.09.15.04.01.18 (version=TLS1_2 cipher=ECDHE-ECDSA-AES128-GCM-SHA256 bits=128/128); Tue, 15 Sep 2020 04:01:19 -0700 (PDT) From: Grzegorz Jaszczyk To: tglx@linutronix.de, jason@lakedaemon.net, maz@kernel.org, s-anna@ti.com Cc: grzegorz.jaszczyk@linaro.org, robh+dt@kernel.org, lee.jones@linaro.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, david@lechnology.com, praneeth@ti.com, "Andrew F . Davis" , Roger Quadros Subject: [PATCH v6 2/5] irqchip/irq-pruss-intc: Add a PRUSS irqchip driver for PRUSS interrupts Date: Tue, 15 Sep 2020 13:00:48 +0200 Message-Id: <1600167651-20851-3-git-send-email-grzegorz.jaszczyk@linaro.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1600167651-20851-1-git-send-email-grzegorz.jaszczyk@linaro.org> References: <1600167651-20851-1-git-send-email-grzegorz.jaszczyk@linaro.org> Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org The Programmable Real-Time Unit Subsystem (PRUSS) contains a local interrupt controller (INTC) that can handle various system input events and post interrupts back to the device-level initiators. The INTC can support upto 64 input events with individual control configuration and hardware prioritization. These events are mapped onto 10 output interrupt lines through two levels of many-to-one mapping support. Different interrupt lines are routed to the individual PRU cores or to the host CPU, or to other devices on the SoC. Some of these events are sourced from peripherals or other sub-modules within that PRUSS, while a few others are sourced from SoC-level peripherals/devices. The PRUSS INTC platform driver manages this PRUSS interrupt controller and implements an irqchip driver to provide a Linux standard way for the PRU client users to enable/disable/ack/re-trigger a PRUSS system event. The system events to interrupt channels and output interrupts relies on the mapping configuration provided either through the PRU firmware blob (for interrupts routed to PRU cores) or via the PRU application's device tree node (for interrupt routed to the main CPU). In the first case the mappings will be programmed on PRU remoteproc driver demand (via irq_create_fwspec_mapping) during the boot of a PRU core and cleaned up after the PRU core is stopped. Reference counting is used to allow multiple system events to share a single channel and to allow multiple channels to share a single host event. The PRUSS INTC module is reference counted during the interrupt setup phase through the irqchip's irq_request_resources() and irq_release_resources() ops. This restricts the module from being removed as long as there are active interrupt users. The driver currently supports and can be built for OMAP architecture based AM335x, AM437x and AM57xx SoCs; Keystone2 architecture based 66AK2G SoCs and Davinci architecture based OMAP-L13x/AM18x/DA850 SoCs. All of these SoCs support 64 system events, 10 interrupt channels and 10 output interrupt lines per PRUSS INTC with a few SoC integration differences. NOTE: Each PRU-ICSS's INTC on AM57xx SoCs is preceded by a Crossbar that enables multiple external events to be routed to a specific number of input interrupt events. Any non-default external interrupt event directed towards PRUSS needs this crossbar to be setup properly. Signed-off-by: Suman Anna Signed-off-by: Andrew F. Davis Signed-off-by: Roger Quadros Signed-off-by: David Lechner Signed-off-by: Grzegorz Jaszczyk --- v5->v6: 1) Address Marc Zyngier comments: - Use unsigned types for variables used to compute masks/shifts (ch, evt, host). - Move part responsible for enabling global interrupt from pruss_intc_map to pruss_intc_init. - Improve coding style in pruss_intc_init with regards to variable assignments. - Align the '=' signs vertically in pruss_irqchip structure. - Change the irq type in xlate handler from IRQ_TYPE_NONE to IRQ_TYPE_LEVEL_MASK - Reorganize variable definitions in pruss_intc_irq_handler. - Move the static date (irq_names) out of the probe function. - The host_data was unnecessary defined as array, rework it to pruss_host_irq_data pointer. 2) Other: - Fix Kconfig help indentation suggested by Randy Dunlap. - Add myself to the authors list. v4->v5: - Use more meaningful define and variable names. - Drop redundant error messages. - Fix error handling in case of irq == 0. - Improve @lock description. - Add David Lechner copyright and sign-off. v3->v4: - Introduce new structure for host_irq data and associate it to the chained interrupt handler. - Improve pruss_intc_irq_handler: get use of new host_irq data structure; improve while loop to use one register read; convert WARN_ON to WARN_ON_ONCE. - Convert irq_linear_revmap into irq_find_mapping. - Clarify information about PRU system events type (edge vs level) by introducing proper updates to the driver description. - Squash generic part of "irqchip/irq-pruss-intc: Add support for ICSSG INTC on K3 SoCs" patch into this one - it allows to reduce entire patchset diff. - Drop reviewed-by due to introduced changes. - Extend module authors list. - Squash patch #6 of previous patchset "irqchip/irq-pruss-intc: Add event mapping support" into this one and introduce below changes: - Get rid of the two distinct code paths in the xlate function and allow to proceed only with 3 parameters description (system_event/channel/host_irq). - Improve error messages and introduce code simplification. - Add extra logic to xlate function which allows to validate existing interrupt routing violation. - Relax map/unmap validation due to introduced changes in xlate function. - Update commit log description. v2->v3: - use single irqchip description instead of separately allocating it for each pruss_intc - get rid of unused mutex - improve error handling v1->v2: - https://patchwork.kernel.org/patch/11069771/ --- drivers/irqchip/Kconfig | 10 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-pruss-intc.c | 596 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 607 insertions(+) create mode 100644 drivers/irqchip/irq-pruss-intc.c diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index bfc9719..733e59f 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -493,6 +493,16 @@ config TI_SCI_INTA_IRQCHIP If you wish to use interrupt aggregator irq resources managed by the TI System Controller, say Y here. Otherwise, say N. +config TI_PRUSS_INTC + tristate "TI PRU-ICSS Interrupt Controller" + depends on ARCH_DAVINCI || SOC_AM33XX || SOC_AM43XX || SOC_DRA7XX || ARCH_KEYSTONE + select IRQ_DOMAIN + help + This enables support for the PRU-ICSS Local Interrupt Controller + present within a PRU-ICSS subsystem present on various TI SoCs. + The PRUSS INTC enables various interrupts to be routed to multiple + different processors within the SoC. + config RISCV_INTC bool "RISC-V Local Interrupt Controller" depends on RISCV diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index 133f9c4..990a106 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -106,6 +106,7 @@ obj-$(CONFIG_MADERA_IRQ) += irq-madera.o obj-$(CONFIG_LS1X_IRQ) += irq-ls1x.o obj-$(CONFIG_TI_SCI_INTR_IRQCHIP) += irq-ti-sci-intr.o obj-$(CONFIG_TI_SCI_INTA_IRQCHIP) += irq-ti-sci-inta.o +obj-$(CONFIG_TI_PRUSS_INTC) += irq-pruss-intc.o obj-$(CONFIG_LOONGSON_LIOINTC) += irq-loongson-liointc.o obj-$(CONFIG_LOONGSON_HTPIC) += irq-loongson-htpic.o obj-$(CONFIG_LOONGSON_HTVEC) += irq-loongson-htvec.o diff --git a/drivers/irqchip/irq-pruss-intc.c b/drivers/irqchip/irq-pruss-intc.c new file mode 100644 index 0000000..319e431 --- /dev/null +++ b/drivers/irqchip/irq-pruss-intc.c @@ -0,0 +1,596 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * PRU-ICSS INTC IRQChip driver for various TI SoCs + * + * Copyright (C) 2016-2020 Texas Instruments Incorporated - http://www.ti.com/ + * + * Author(s): + * Andrew F. Davis + * Suman Anna + * Grzegorz Jaszczyk for Texas Instruments + * + * Copyright (C) 2019 David Lechner + */ + +#include +#include +#include +#include +#include +#include + +/* + * Number of host interrupts reaching the main MPU sub-system. Note that this + * is not the same as the total number of host interrupts supported by the PRUSS + * INTC instance + */ +#define MAX_NUM_HOST_IRQS 8 + +/* minimum starting host interrupt number for MPU */ +#define FIRST_PRU_HOST_INT 2 + +/* PRU_ICSS_INTC registers */ +#define PRU_INTC_REVID 0x0000 +#define PRU_INTC_CR 0x0004 +#define PRU_INTC_GER 0x0010 +#define PRU_INTC_GNLR 0x001c +#define PRU_INTC_SISR 0x0020 +#define PRU_INTC_SICR 0x0024 +#define PRU_INTC_EISR 0x0028 +#define PRU_INTC_EICR 0x002c +#define PRU_INTC_HIEISR 0x0034 +#define PRU_INTC_HIDISR 0x0038 +#define PRU_INTC_GPIR 0x0080 +#define PRU_INTC_SRSR(x) (0x0200 + (x) * 4) +#define PRU_INTC_SECR(x) (0x0280 + (x) * 4) +#define PRU_INTC_ESR(x) (0x0300 + (x) * 4) +#define PRU_INTC_ECR(x) (0x0380 + (x) * 4) +#define PRU_INTC_CMR(x) (0x0400 + (x) * 4) +#define PRU_INTC_HMR(x) (0x0800 + (x) * 4) +#define PRU_INTC_HIPIR(x) (0x0900 + (x) * 4) +#define PRU_INTC_SIPR(x) (0x0d00 + (x) * 4) +#define PRU_INTC_SITR(x) (0x0d80 + (x) * 4) +#define PRU_INTC_HINLR(x) (0x1100 + (x) * 4) +#define PRU_INTC_HIER 0x1500 + +/* CMR register bit-field macros */ +#define CMR_EVT_MAP_MASK 0xf +#define CMR_EVT_MAP_BITS 8 +#define CMR_EVT_PER_REG 4 + +/* HMR register bit-field macros */ +#define HMR_CH_MAP_MASK 0xf +#define HMR_CH_MAP_BITS 8 +#define HMR_CH_PER_REG 4 + +/* HIPIR register bit-fields */ +#define INTC_HIPIR_NONE_HINT 0x80000000 + +#define MAX_PRU_SYS_EVENTS 160 +#define MAX_PRU_CHANNELS 20 + +/** + * struct pruss_intc_map_record - keeps track of actual mapping state + * @value: The currently mapped value (channel or host) + * @ref_count: Keeps track of number of current users of this resource + */ +struct pruss_intc_map_record { + u8 value; + u8 ref_count; +}; + +/** + * struct pruss_intc_match_data - match data to handle SoC variations + * @num_system_events: number of input system events handled by the PRUSS INTC + * @num_host_events: number of host events (which is equal to number of + * channels) supported by the PRUSS INTC + */ +struct pruss_intc_match_data { + u8 num_system_events; + u8 num_host_events; +}; + +/** + * struct pruss_intc - PRUSS interrupt controller structure + * @event_channel: current state of system event to channel mappings + * @channel_host: current state of channel to host mappings + * @irqs: kernel irq numbers corresponding to PRUSS host interrupts + * @base: base virtual address of INTC register space + * @domain: irq domain for this interrupt controller + * @soc_config: cached PRUSS INTC IP configuration data + * @dev: PRUSS INTC device pointer + * @lock: mutex to serialize interrupts mapping + */ +struct pruss_intc { + struct pruss_intc_map_record event_channel[MAX_PRU_SYS_EVENTS]; + struct pruss_intc_map_record channel_host[MAX_PRU_CHANNELS]; + unsigned int irqs[MAX_NUM_HOST_IRQS]; + void __iomem *base; + struct irq_domain *domain; + const struct pruss_intc_match_data *soc_config; + struct device *dev; + struct mutex lock; /* PRUSS INTC lock */ +}; + +/** + * struct pruss_host_irq_data - PRUSS host irq data structure + * @intc: PRUSS interrupt controller pointer + * @host_irq: host irq number + */ +struct pruss_host_irq_data { + struct pruss_intc *intc; + u8 host_irq; +}; + +static inline u32 pruss_intc_read_reg(struct pruss_intc *intc, unsigned int reg) +{ + return readl_relaxed(intc->base + reg); +} + +static inline void pruss_intc_write_reg(struct pruss_intc *intc, + unsigned int reg, u32 val) +{ + writel_relaxed(val, intc->base + reg); +} + +static void pruss_intc_update_cmr(struct pruss_intc *intc, unsigned int evt, + u8 ch) +{ + u32 idx, offset, val; + + idx = evt / CMR_EVT_PER_REG; + offset = (evt % CMR_EVT_PER_REG) * CMR_EVT_MAP_BITS; + + val = pruss_intc_read_reg(intc, PRU_INTC_CMR(idx)); + val &= ~(CMR_EVT_MAP_MASK << offset); + val |= ch << offset; + pruss_intc_write_reg(intc, PRU_INTC_CMR(idx), val); + + dev_dbg(intc->dev, "SYSEV%u -> CH%d (CMR%d 0x%08x)\n", evt, ch, + idx, pruss_intc_read_reg(intc, PRU_INTC_CMR(idx))); +} + +static void pruss_intc_update_hmr(struct pruss_intc *intc, u8 ch, u8 host) +{ + u32 idx, offset, val; + + idx = ch / HMR_CH_PER_REG; + offset = (ch % HMR_CH_PER_REG) * HMR_CH_MAP_BITS; + + val = pruss_intc_read_reg(intc, PRU_INTC_HMR(idx)); + val &= ~(HMR_CH_MAP_MASK << offset); + val |= host << offset; + pruss_intc_write_reg(intc, PRU_INTC_HMR(idx), val); + + dev_dbg(intc->dev, "CH%d -> HOST%d (HMR%d 0x%08x)\n", ch, host, idx, + pruss_intc_read_reg(intc, PRU_INTC_HMR(idx))); +} + +/** + * pruss_intc_map() - configure the PRUSS INTC + * @intc: PRUSS interrupt controller pointer + * @hwirq: the system event number + * + * Configures the PRUSS INTC with the provided configuration from the one parsed + * in the xlate function. + */ +static void pruss_intc_map(struct pruss_intc *intc, unsigned long hwirq) +{ + struct device *dev = intc->dev; + u8 ch, host, reg_idx; + u32 val; + + mutex_lock(&intc->lock); + + intc->event_channel[hwirq].ref_count++; + + ch = intc->event_channel[hwirq].value; + host = intc->channel_host[ch].value; + + pruss_intc_update_cmr(intc, hwirq, ch); + + reg_idx = hwirq / 32; + val = BIT(hwirq % 32); + + /* clear and enable system event */ + pruss_intc_write_reg(intc, PRU_INTC_ESR(reg_idx), val); + pruss_intc_write_reg(intc, PRU_INTC_SECR(reg_idx), val); + + if (++intc->channel_host[ch].ref_count == 1) { + pruss_intc_update_hmr(intc, ch, host); + + /* enable host interrupts */ + pruss_intc_write_reg(intc, PRU_INTC_HIEISR, host); + } + + dev_dbg(dev, "mapped system_event = %lu channel = %d host = %d", + hwirq, ch, host); + + mutex_unlock(&intc->lock); +} + +/** + * pruss_intc_unmap() - unconfigure the PRUSS INTC + * @intc: PRUSS interrupt controller pointer + * @hwirq: the system event number + * + * Undo whatever was done in pruss_intc_map() for a PRU core. + * Mappings are reference counted, so resources are only disabled when there + * are no longer any users. + */ +static void pruss_intc_unmap(struct pruss_intc *intc, unsigned long hwirq) +{ + u8 ch, host, reg_idx; + u32 val; + + mutex_lock(&intc->lock); + + ch = intc->event_channel[hwirq].value; + host = intc->channel_host[ch].value; + + if (--intc->channel_host[ch].ref_count == 0) { + /* disable host interrupts */ + pruss_intc_write_reg(intc, PRU_INTC_HIDISR, host); + + /* clear the map using reset value 0 */ + pruss_intc_update_hmr(intc, ch, 0); + } + + intc->event_channel[hwirq].ref_count--; + reg_idx = hwirq / 32; + val = BIT(hwirq % 32); + + /* disable system events */ + pruss_intc_write_reg(intc, PRU_INTC_ECR(reg_idx), val); + /* clear any pending status */ + pruss_intc_write_reg(intc, PRU_INTC_SECR(reg_idx), val); + + /* clear the map using reset value 0 */ + pruss_intc_update_cmr(intc, hwirq, 0); + + dev_dbg(intc->dev, "unmapped system_event = %lu channel = %d host = %d\n", + hwirq, ch, host); + + mutex_unlock(&intc->lock); +} + +static void pruss_intc_init(struct pruss_intc *intc) +{ + const struct pruss_intc_match_data *soc_config = intc->soc_config; + int num_chnl_map_regs, num_host_intr_regs, num_event_type_regs, i; + + num_chnl_map_regs = DIV_ROUND_UP(soc_config->num_system_events, + CMR_EVT_PER_REG); + num_host_intr_regs = DIV_ROUND_UP(soc_config->num_host_events, + HMR_CH_PER_REG); + num_event_type_regs = DIV_ROUND_UP(soc_config->num_system_events, 32); + + /* + * configure polarity (SIPR register) to active high and + * type (SITR register) to level interrupt for all system events + */ + for (i = 0; i < num_event_type_regs; i++) { + pruss_intc_write_reg(intc, PRU_INTC_SIPR(i), 0xffffffff); + pruss_intc_write_reg(intc, PRU_INTC_SITR(i), 0); + } + + /* clear all interrupt channel map registers, 4 events per register */ + for (i = 0; i < num_chnl_map_regs; i++) + pruss_intc_write_reg(intc, PRU_INTC_CMR(i), 0); + + /* clear all host interrupt map registers, 4 channels per register */ + for (i = 0; i < num_host_intr_regs; i++) + pruss_intc_write_reg(intc, PRU_INTC_HMR(i), 0); + + /* global interrupt enable */ + pruss_intc_write_reg(intc, PRU_INTC_GER, 1); +} + +static void pruss_intc_irq_ack(struct irq_data *data) +{ + struct pruss_intc *intc = irq_data_get_irq_chip_data(data); + unsigned int hwirq = data->hwirq; + + pruss_intc_write_reg(intc, PRU_INTC_SICR, hwirq); +} + +static void pruss_intc_irq_mask(struct irq_data *data) +{ + struct pruss_intc *intc = irq_data_get_irq_chip_data(data); + unsigned int hwirq = data->hwirq; + + pruss_intc_write_reg(intc, PRU_INTC_EICR, hwirq); +} + +static void pruss_intc_irq_unmask(struct irq_data *data) +{ + struct pruss_intc *intc = irq_data_get_irq_chip_data(data); + unsigned int hwirq = data->hwirq; + + pruss_intc_write_reg(intc, PRU_INTC_EISR, hwirq); +} + +static int pruss_intc_irq_reqres(struct irq_data *data) +{ + if (!try_module_get(THIS_MODULE)) + return -ENODEV; + + return 0; +} + +static void pruss_intc_irq_relres(struct irq_data *data) +{ + module_put(THIS_MODULE); +} + +static struct irq_chip pruss_irqchip = { + .name = "pruss-intc", + .irq_ack = pruss_intc_irq_ack, + .irq_mask = pruss_intc_irq_mask, + .irq_unmask = pruss_intc_irq_unmask, + .irq_request_resources = pruss_intc_irq_reqres, + .irq_release_resources = pruss_intc_irq_relres, +}; + +static int pruss_intc_validate_mapping(struct pruss_intc *intc, int event, + int channel, int host) +{ + struct device *dev = intc->dev; + int ret = 0; + + mutex_lock(&intc->lock); + + /* check if sysevent already assigned */ + if (intc->event_channel[event].ref_count > 0 && + intc->event_channel[event].value != channel) { + dev_err(dev, "event %d (req. ch %d) already assigned to channel %d\n", + event, channel, intc->event_channel[event].value); + ret = -EBUSY; + goto unlock; + } + + /* check if channel already assigned */ + if (intc->channel_host[channel].ref_count > 0 && + intc->channel_host[channel].value != host) { + dev_err(dev, "channel %d (req. host %d) already assigned to host %d\n", + channel, host, intc->channel_host[channel].value); + ret = -EBUSY; + goto unlock; + } + + intc->event_channel[event].value = channel; + intc->channel_host[channel].value = host; + +unlock: + mutex_unlock(&intc->lock); + return ret; +} + +static int +pruss_intc_irq_domain_xlate(struct irq_domain *d, struct device_node *node, + const u32 *intspec, unsigned int intsize, + unsigned long *out_hwirq, unsigned int *out_type) +{ + struct pruss_intc *intc = d->host_data; + struct device *dev = intc->dev; + int ret, sys_event, channel, host; + + if (intsize < 3) + return -EINVAL; + + sys_event = intspec[0]; + if (sys_event < 0 || sys_event >= intc->soc_config->num_system_events) { + dev_err(dev, "%d is not valid event number\n", sys_event); + return -EINVAL; + } + + channel = intspec[1]; + if (channel < 0 || channel >= intc->soc_config->num_host_events) { + dev_err(dev, "%d is not valid channel number", channel); + return -EINVAL; + } + + host = intspec[2]; + if (host < 0 || host >= intc->soc_config->num_host_events) { + dev_err(dev, "%d is not valid host irq number\n", host); + return -EINVAL; + } + + /* check if requested sys_event was already mapped, if so validate it */ + ret = pruss_intc_validate_mapping(intc, sys_event, channel, host); + if (ret) + return ret; + + *out_hwirq = sys_event; + *out_type = IRQ_TYPE_LEVEL_MASK; + + return 0; +} + +static int pruss_intc_irq_domain_map(struct irq_domain *d, unsigned int virq, + irq_hw_number_t hw) +{ + struct pruss_intc *intc = d->host_data; + + pruss_intc_map(intc, hw); + + irq_set_chip_data(virq, intc); + irq_set_chip_and_handler(virq, &pruss_irqchip, handle_level_irq); + + return 0; +} + +static void pruss_intc_irq_domain_unmap(struct irq_domain *d, unsigned int virq) +{ + struct pruss_intc *intc = d->host_data; + unsigned long hwirq = irqd_to_hwirq(irq_get_irq_data(virq)); + + irq_set_chip_and_handler(virq, NULL, NULL); + irq_set_chip_data(virq, NULL); + pruss_intc_unmap(intc, hwirq); +} + +static const struct irq_domain_ops pruss_intc_irq_domain_ops = { + .xlate = pruss_intc_irq_domain_xlate, + .map = pruss_intc_irq_domain_map, + .unmap = pruss_intc_irq_domain_unmap, +}; + +static void pruss_intc_irq_handler(struct irq_desc *desc) +{ + unsigned int irq = irq_desc_get_irq(desc); + struct irq_chip *chip = irq_desc_get_chip(desc); + struct pruss_host_irq_data *host_irq_data = irq_get_handler_data(irq); + struct pruss_intc *intc = host_irq_data->intc; + u8 host_irq = host_irq_data->host_irq + FIRST_PRU_HOST_INT; + + chained_irq_enter(chip, desc); + + while (true) { + u32 hipir; + unsigned int virq; + int hwirq; + + /* get highest priority pending PRUSS system event */ + hipir = pruss_intc_read_reg(intc, PRU_INTC_HIPIR(host_irq)); + if (hipir & INTC_HIPIR_NONE_HINT) + break; + + hwirq = hipir & GENMASK(9, 0); + virq = irq_find_mapping(intc->domain, hwirq); + + /* + * NOTE: manually ACK any system events that do not have a + * handler mapped yet + */ + if (WARN_ON_ONCE(!virq)) + pruss_intc_write_reg(intc, PRU_INTC_SICR, hwirq); + else + generic_handle_irq(virq); + } + + chained_irq_exit(chip, desc); +} + +static const char * const irq_names[MAX_NUM_HOST_IRQS] = { + "host_intr0", "host_intr1", "host_intr2", "host_intr3", + "host_intr4", "host_intr5", "host_intr6", "host_intr7", +}; + +static int pruss_intc_probe(struct platform_device *pdev) +{ + const struct pruss_intc_match_data *data; + struct device *dev = &pdev->dev; + struct pruss_intc *intc; + struct pruss_host_irq_data *host_data; + int i, irq, ret; + u8 max_system_events; + + data = of_device_get_match_data(dev); + if (!data) + return -ENODEV; + + max_system_events = data->num_system_events; + + intc = devm_kzalloc(dev, sizeof(*intc), GFP_KERNEL); + if (!intc) + return -ENOMEM; + + intc->soc_config = data; + intc->dev = dev; + platform_set_drvdata(pdev, intc); + + intc->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(intc->base)) + return PTR_ERR(intc->base); + + pruss_intc_init(intc); + + mutex_init(&intc->lock); + + intc->domain = irq_domain_add_linear(dev->of_node, max_system_events, + &pruss_intc_irq_domain_ops, intc); + if (!intc->domain) + return -ENOMEM; + + for (i = 0; i < MAX_NUM_HOST_IRQS; i++) { + irq = platform_get_irq_byname(pdev, irq_names[i]); + if (irq <= 0) { + ret = (irq == 0) ? -EINVAL : irq; + goto fail_irq; + } + + intc->irqs[i] = irq; + + host_data = devm_kzalloc(dev, sizeof(*host_data), GFP_KERNEL); + if (!host_data) { + ret = -ENOMEM; + goto fail_irq; + } + + host_data->intc = intc; + host_data->host_irq = i; + + irq_set_handler_data(irq, host_data); + irq_set_chained_handler(irq, pruss_intc_irq_handler); + } + + return 0; + +fail_irq: + while (--i >= 0) + irq_set_chained_handler_and_data(intc->irqs[i], NULL, NULL); + + irq_domain_remove(intc->domain); + + return ret; +} + +static int pruss_intc_remove(struct platform_device *pdev) +{ + struct pruss_intc *intc = platform_get_drvdata(pdev); + u8 max_system_events = intc->soc_config->num_system_events; + unsigned int hwirq; + int i; + + for (i = 0; i < MAX_NUM_HOST_IRQS; i++) + irq_set_chained_handler_and_data(intc->irqs[i], NULL, NULL); + + for (hwirq = 0; hwirq < max_system_events; hwirq++) + irq_dispose_mapping(irq_find_mapping(intc->domain, hwirq)); + + irq_domain_remove(intc->domain); + + return 0; +} + +static const struct pruss_intc_match_data pruss_intc_data = { + .num_system_events = 64, + .num_host_events = 10, +}; + +static const struct of_device_id pruss_intc_of_match[] = { + { + .compatible = "ti,pruss-intc", + .data = &pruss_intc_data, + }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, pruss_intc_of_match); + +static struct platform_driver pruss_intc_driver = { + .driver = { + .name = "pruss-intc", + .of_match_table = pruss_intc_of_match, + .suppress_bind_attrs = true, + }, + .probe = pruss_intc_probe, + .remove = pruss_intc_remove, +}; +module_platform_driver(pruss_intc_driver); + +MODULE_AUTHOR("Andrew F. Davis "); +MODULE_AUTHOR("Suman Anna "); +MODULE_AUTHOR("Grzegorz Jaszczyk "); +MODULE_DESCRIPTION("TI PRU-ICSS INTC Driver"); +MODULE_LICENSE("GPL v2"); From patchwork Tue Sep 15 11:00:49 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Grzegorz Jaszczyk X-Patchwork-Id: 295553 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-12.8 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH, MAILING_LIST_MULTI, SIGNED_OFF_BY, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 6DB59C43461 for ; Wed, 16 Sep 2020 00:57:20 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 33C8C20715 for ; Wed, 16 Sep 2020 00:57:20 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="yyMFQuI1" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726228AbgIPA5S (ORCPT ); Tue, 15 Sep 2020 20:57:18 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:60126 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726095AbgIOLPB (ORCPT ); Tue, 15 Sep 2020 07:15:01 -0400 Received: from mail-lj1-x243.google.com (mail-lj1-x243.google.com [IPv6:2a00:1450:4864:20::243]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id DEB5AC061355 for ; Tue, 15 Sep 2020 04:01:23 -0700 (PDT) Received: by mail-lj1-x243.google.com with SMTP id r24so2434128ljm.3 for ; Tue, 15 Sep 2020 04:01:23 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=xSpHbTMRF5l19WgNcjU80aU88bYV7d4gSwfI8EzLalw=; b=yyMFQuI1h5MjsRDh0RoPYqvdO2aC3fzk9cDPN3EHzGepEPWwIEyol3ueu7Hy7yX885 /vMQOv/HuZEiJlLgzQDEkAQ/OhDV11uwUhB20gy9kW619W25vBSOAy78Ed6JLB5zT6H+ bCsMheI3kKxWDFjKGRg9W2oSRzE8u2OMnUjXlQUpXNo7d0n6aTrPAA/3atamjonMaStz 8+1EvJKaQZGQhi4wziZqDEV9/5qri1Z2ouN1LZbQIQh2QhPApL8E8MUaVeB3HRV9/H8x Gw5udUfFW/LpvPSpTuQRhk6wAKk4k1GVGWNDNYU5Iwv2d52NUyAJqlTZMEIjhYcQcS4W TVhA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=xSpHbTMRF5l19WgNcjU80aU88bYV7d4gSwfI8EzLalw=; b=PyGsKQOFlt4oipLY9ucFI/v62rkUGLkYM+iuj6qHpw9cYTgCu+77eqwVja6734MPw1 0JnQGKYAHbTecemGRqMOp2OvIxbiS2O48eLUgkV/Kij5q5Y1vInaet3PQ2tSSACI8ylU IsEblgBb4Hti281mRnPp3XgCovsCT0S97Y+9jL9p16IVOgC1/vBhrGHMi5YVEzIPLl/0 ZqTmdaZ0Sc8DW3kNgw4gXLoEtd06opBLqC5vmVGiWnAzG+cZ5viox8KoPWgni1dyXUOo Jnr/toyQxQcfuScyhfMXWNUUL5NidG2Fa5wasl2qgzMXTp84fQ7mL4FZj5nb47qEjkzv uFCQ== X-Gm-Message-State: AOAM532zPguA2zqFSLznApzXNh0MjsNOBt36VkGr9qC6InW0p1KQYJZp WFw+Rrg5STp9BUAgOuM/K8pTrw== X-Google-Smtp-Source: ABdhPJyhY6Qj6I9pnmWznT01a1K+SmOxj2MXEqZY9LkwAQW/Lq+lEQgWKmGKEGFDvSdunafFRasYiQ== X-Received: by 2002:a2e:a543:: with SMTP id e3mr6304643ljn.33.1600167682043; Tue, 15 Sep 2020 04:01:22 -0700 (PDT) Received: from gilgamesh.semihalf.com (193-106-246-138.noc.fibertech.net.pl. [193.106.246.138]) by smtp.gmail.com with ESMTPSA id n3sm4588916ljj.59.2020.09.15.04.01.20 (version=TLS1_2 cipher=ECDHE-ECDSA-AES128-GCM-SHA256 bits=128/128); Tue, 15 Sep 2020 04:01:21 -0700 (PDT) From: Grzegorz Jaszczyk To: tglx@linutronix.de, jason@lakedaemon.net, maz@kernel.org, s-anna@ti.com Cc: grzegorz.jaszczyk@linaro.org, robh+dt@kernel.org, lee.jones@linaro.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, david@lechnology.com, praneeth@ti.com Subject: [PATCH v6 3/5] irqchip/irq-pruss-intc: Add logic for handling reserved interrupts Date: Tue, 15 Sep 2020 13:00:49 +0200 Message-Id: <1600167651-20851-4-git-send-email-grzegorz.jaszczyk@linaro.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1600167651-20851-1-git-send-email-grzegorz.jaszczyk@linaro.org> References: <1600167651-20851-1-git-send-email-grzegorz.jaszczyk@linaro.org> Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org From: Suman Anna The PRUSS INTC has a fixed number of output interrupt lines that are connected to a number of processors or other PRUSS instances or other devices (like DMA) on the SoC. The output interrupt lines 2 through 9 are usually connected to the main Arm host processor and are referred to as host interrupts 0 through 7 from ARM/MPU perspective. All of these 8 host interrupts are not always exclusively connected to the Arm interrupt controller. Some SoCs have some interrupt lines not connected to the Arm interrupt controller at all, while a few others have the interrupt lines connected to multiple processors in which they need to be partitioned as per SoC integration needs. For example, AM437x and 66AK2G SoCs have 2 PRUSS instances each and have the host interrupt 5 connected to the other PRUSS, while AM335x has host interrupt 0 shared between MPU and TSC_ADC and host interrupts 6 & 7 shared between MPU and a DMA controller. Add logic to the PRUSS INTC driver to ignore both these shared and invalid interrupts. Signed-off-by: Suman Anna Signed-off-by: Grzegorz Jaszczyk --- v5->v6: - No change. v4->v5: - Rename: s/invalid_intr/irqs_reserved/ v3->v4: - Due to changes in DT bindings which converts irqs-reserved property from uint8-array to bitmask requested by Rob introduce relevant changes in the driver. - Merge the irqs-reserved and irqs-shared to one property since they can be handled by one logic (relevant change was introduced to DT binding). - Update commit message. v2->v3: - Extra checks for (intc->irqs[i]) in error/remove path was moved from "irqchip/irq-pruss-intc: Add a PRUSS irqchip driver for PRUSS interrupts" to this patch v1->v2: - https://patchwork.kernel.org/patch/11069757/ --- drivers/irqchip/irq-pruss-intc.c | 29 ++++++++++++++++++++++++----- 1 file changed, 24 insertions(+), 5 deletions(-) diff --git a/drivers/irqchip/irq-pruss-intc.c b/drivers/irqchip/irq-pruss-intc.c index 319e431..396dc55 100644 --- a/drivers/irqchip/irq-pruss-intc.c +++ b/drivers/irqchip/irq-pruss-intc.c @@ -484,7 +484,7 @@ static int pruss_intc_probe(struct platform_device *pdev) struct pruss_intc *intc; struct pruss_host_irq_data *host_data; int i, irq, ret; - u8 max_system_events; + u8 max_system_events, irqs_reserved = 0; data = of_device_get_match_data(dev); if (!data) @@ -504,6 +504,16 @@ static int pruss_intc_probe(struct platform_device *pdev) if (IS_ERR(intc->base)) return PTR_ERR(intc->base); + ret = of_property_read_u8(dev->of_node, "ti,irqs-reserved", + &irqs_reserved); + + /* + * The irqs-reserved is used only for some SoC's therefore not having + * this property is still valid + */ + if (ret < 0 && ret != -EINVAL) + return ret; + pruss_intc_init(intc); mutex_init(&intc->lock); @@ -514,6 +524,9 @@ static int pruss_intc_probe(struct platform_device *pdev) return -ENOMEM; for (i = 0; i < MAX_NUM_HOST_IRQS; i++) { + if (irqs_reserved & BIT(i)) + continue; + irq = platform_get_irq_byname(pdev, irq_names[i]); if (irq <= 0) { ret = (irq == 0) ? -EINVAL : irq; @@ -538,8 +551,11 @@ static int pruss_intc_probe(struct platform_device *pdev) return 0; fail_irq: - while (--i >= 0) - irq_set_chained_handler_and_data(intc->irqs[i], NULL, NULL); + while (--i >= 0) { + if (intc->irqs[i]) + irq_set_chained_handler_and_data(intc->irqs[i], NULL, + NULL); + } irq_domain_remove(intc->domain); @@ -553,8 +569,11 @@ static int pruss_intc_remove(struct platform_device *pdev) unsigned int hwirq; int i; - for (i = 0; i < MAX_NUM_HOST_IRQS; i++) - irq_set_chained_handler_and_data(intc->irqs[i], NULL, NULL); + for (i = 0; i < MAX_NUM_HOST_IRQS; i++) { + if (intc->irqs[i]) + irq_set_chained_handler_and_data(intc->irqs[i], NULL, + NULL); + } for (hwirq = 0; hwirq < max_system_events; hwirq++) irq_dispose_mapping(irq_find_mapping(intc->domain, hwirq)); From patchwork Tue Sep 15 11:00:50 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Grzegorz Jaszczyk X-Patchwork-Id: 256537 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-12.8 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH, MAILING_LIST_MULTI, SIGNED_OFF_BY, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id DE7B2C2D0F6 for ; Wed, 16 Sep 2020 00:57:52 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 9B3F321655 for ; Wed, 16 Sep 2020 00:57:52 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="bu9PMoyx" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726297AbgIPA5t (ORCPT ); Tue, 15 Sep 2020 20:57:49 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:60126 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726129AbgIOLMz (ORCPT ); Tue, 15 Sep 2020 07:12:55 -0400 Received: from mail-lf1-x141.google.com (mail-lf1-x141.google.com [IPv6:2a00:1450:4864:20::141]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 02B99C06121C for ; Tue, 15 Sep 2020 04:01:31 -0700 (PDT) Received: by mail-lf1-x141.google.com with SMTP id y17so2608577lfa.8 for ; Tue, 15 Sep 2020 04:01:31 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=0bFMdRSpPXTVw6FkASDzFuci7f9roVwhgsTsGiODYGg=; b=bu9PMoyxQXeCQJXQTnO4uU92zugPEP+32GJTwTJGhFmLd0RKGN8bQMrRnrKu/zSoeW GHnIGVzICEGX5Pcf0CeO2+Vx2PIVKlddZLpPH53MSxEf3QsDaWP9sxmMvToBFOJpJqXG R3YHAgG2fzOpyA+PLcgFr5shCpOAsw7ncEZGKNcuLmrZ8IswbWdlBJDRYLAPLj/OKHTR QGOISTSf5PVYJsjPvlHeeE7eNFI087vR7/7dGkIjI+4lO4+qRZYbVvDoH0baNiQRGZJH l0oBFry2v5TM9hZWyFzXSFUNlc2QdW8s/A2tMXdKHLu8VVG0wIUW078NKWlFvKuaIHs5 PHNw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=0bFMdRSpPXTVw6FkASDzFuci7f9roVwhgsTsGiODYGg=; b=RCHLp7xedDDeYNAHRHCeimS1Vrcd8zNMPYm13wKEFqZt+2UoYLrSP3Lw/db/sd2DbC ObN53wd8vSEId/bmQ4VViHxNyVRh2M3bLJb8tjkL9qgg47yBRsG0IGNzbxjKBtLDDiv3 S2aLoyLCGIF3/stZsV0YPxof77EbgXHMuIFd6sHYjL0gSZn6milEMWsshf8uwc1BfAdI ez8mIQw28VsmswdTDqoE1kWjzp6gSxc9UTxHiFviL17RmWXAt06qZC1vztcMJFyyyh4k IvMkoFWl6RCXMUJVy+AwpUAdTk1yv4ImnKeBS2k8dyLCxVbKsTC8ljlcxNt4NuuIrpj+ SFYw== X-Gm-Message-State: AOAM532ltfOW9TgNaa3d5uPGbHoPjPD4jlKw1OmAtwljEbX1Z4itSh+9 c6KppXStM3CWpuioTtVkwjqS6A== X-Google-Smtp-Source: ABdhPJzp9MBZN/pyDF9GzMLHUJeD6RV5x2JiSkBUFmjYlSIsuOj7jjb30r36nAQxW4uhgqAt4m+WVg== X-Received: by 2002:a19:d95:: with SMTP id 143mr5883867lfn.4.1600167684008; Tue, 15 Sep 2020 04:01:24 -0700 (PDT) Received: from gilgamesh.semihalf.com (193-106-246-138.noc.fibertech.net.pl. [193.106.246.138]) by smtp.gmail.com with ESMTPSA id n3sm4588916ljj.59.2020.09.15.04.01.22 (version=TLS1_2 cipher=ECDHE-ECDSA-AES128-GCM-SHA256 bits=128/128); Tue, 15 Sep 2020 04:01:23 -0700 (PDT) From: Grzegorz Jaszczyk To: tglx@linutronix.de, jason@lakedaemon.net, maz@kernel.org, s-anna@ti.com Cc: grzegorz.jaszczyk@linaro.org, robh+dt@kernel.org, lee.jones@linaro.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, david@lechnology.com, praneeth@ti.com Subject: [PATCH v6 4/5] irqchip/irq-pruss-intc: Implement irq_{get, set}_irqchip_state ops Date: Tue, 15 Sep 2020 13:00:50 +0200 Message-Id: <1600167651-20851-5-git-send-email-grzegorz.jaszczyk@linaro.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1600167651-20851-1-git-send-email-grzegorz.jaszczyk@linaro.org> References: <1600167651-20851-1-git-send-email-grzegorz.jaszczyk@linaro.org> Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org From: David Lechner This implements the irq_get_irqchip_state and irq_set_irqchip_state callbacks for the TI PRUSS INTC driver. The set callback can be used by drivers to "kick" a PRU by injecting a PRU system event. Signed-off-by: David Lechner Signed-off-by: Suman Anna Signed-off-by: Grzegorz Jaszczyk Reviewed-by: Lee Jones --- v5->v6: - Drop example from the commit log v4->v5: - No change. v3->v4: - Update commit message v2->v3: - Get rid of unnecessary pruss_intc_check_write() and use pruss_intc_write_reg directly. v1->v2: - https://patchwork.kernel.org/patch/11069769/ --- drivers/irqchip/irq-pruss-intc.c | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/drivers/irqchip/irq-pruss-intc.c b/drivers/irqchip/irq-pruss-intc.c index 396dc55..41c6271 100644 --- a/drivers/irqchip/irq-pruss-intc.c +++ b/drivers/irqchip/irq-pruss-intc.c @@ -12,6 +12,7 @@ * Copyright (C) 2019 David Lechner */ +#include #include #include #include @@ -323,6 +324,43 @@ static void pruss_intc_irq_relres(struct irq_data *data) module_put(THIS_MODULE); } +static int pruss_intc_irq_get_irqchip_state(struct irq_data *data, + enum irqchip_irq_state which, + bool *state) +{ + struct pruss_intc *intc = irq_data_get_irq_chip_data(data); + u32 reg, mask, srsr; + + if (which != IRQCHIP_STATE_PENDING) + return -EINVAL; + + reg = PRU_INTC_SRSR(data->hwirq / 32); + mask = BIT(data->hwirq % 32); + + srsr = pruss_intc_read_reg(intc, reg); + + *state = !!(srsr & mask); + + return 0; +} + +static int pruss_intc_irq_set_irqchip_state(struct irq_data *data, + enum irqchip_irq_state which, + bool state) +{ + struct pruss_intc *intc = irq_data_get_irq_chip_data(data); + + if (which != IRQCHIP_STATE_PENDING) + return -EINVAL; + + if (state) + pruss_intc_write_reg(intc, PRU_INTC_SISR, data->hwirq); + else + pruss_intc_write_reg(intc, PRU_INTC_SICR, data->hwirq); + + return 0; +} + static struct irq_chip pruss_irqchip = { .name = "pruss-intc", .irq_ack = pruss_intc_irq_ack, @@ -330,6 +368,8 @@ static struct irq_chip pruss_irqchip = { .irq_unmask = pruss_intc_irq_unmask, .irq_request_resources = pruss_intc_irq_reqres, .irq_release_resources = pruss_intc_irq_relres, + .irq_get_irqchip_state = pruss_intc_irq_get_irqchip_state, + .irq_set_irqchip_state = pruss_intc_irq_set_irqchip_state, }; static int pruss_intc_validate_mapping(struct pruss_intc *intc, int event, From patchwork Tue Sep 15 11:00:51 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Grzegorz Jaszczyk X-Patchwork-Id: 295552 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-12.8 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH, MAILING_LIST_MULTI, SIGNED_OFF_BY, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id E9A0AC2D0E3 for ; Wed, 16 Sep 2020 00:57:50 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id BD29A21655 for ; Wed, 16 Sep 2020 00:57:50 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="WjZlN/Kd" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726184AbgIPA5s (ORCPT ); Tue, 15 Sep 2020 20:57:48 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:60124 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726196AbgIOLMz (ORCPT ); Tue, 15 Sep 2020 07:12:55 -0400 Received: from mail-lj1-x241.google.com (mail-lj1-x241.google.com [IPv6:2a00:1450:4864:20::241]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 88CA9C061220 for ; Tue, 15 Sep 2020 04:01:39 -0700 (PDT) Received: by mail-lj1-x241.google.com with SMTP id c2so2374829ljj.12 for ; Tue, 15 Sep 2020 04:01:39 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=mc2gdazpP2I7bg6WRsLz8UwRyinpHdK0stSWn7q23gw=; b=WjZlN/Kd9Jjxj+pMCooXrtqM/Mbi0szwmTXaJ7skiL/yJ5v/3ifkWd5b/hsdl5pPaq JBv/2KOxLgfMry2/ioIZAV9/oRcP9+nkFJyAUzwBcbyaRSfazV9xJvJMJE5AuXtzGdTS KNswQQrHg28VxTj2qkvyl/G1Kd56qkD9wzLZFuMfa8KhP2wREIPZ+pGNTxIyAPNP7JLC SpaPsbtFbM0Y6pgCO0PPD6BACZHwiSIgMZusSUzrUSX8WhA/a3yGEVl+RYOUXdAQkqsG vPmkFc/nLjlgLirmnrW/qNsLeX3NGpeNinQSLd2S7DF09oAg+p2dwGSBv38MguzYpYS3 h9+Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=mc2gdazpP2I7bg6WRsLz8UwRyinpHdK0stSWn7q23gw=; b=Pp02VWYihfOwYMOSIW+eMLWx/FzTn9r0DKZfBv9ZHf037GqbDlki030mTHQ2TKq0mJ kgxhE/jwwprgh4ZX4ex/1cX2354XFyITD0HxUtzZrJSkwSQ7row9DQ918ulKueWbqtMe S3pqHQz/3+buoXjW7mdBQPQoyF1yq1JokGCx9fxiSpyiUKh27lk0B5XwHjC7QtredOkF pLx63yC7Qb4I0K1/01TSpK+0nUObjet6YWvSXQsfzBTsPz3jd9jwmZm0Zt7WOoJqbs47 FlrEAXQuHp+ejNgut/wHoV24Szk7NoqoFpguP9U3b3Zb8Cbv0dsk+9XBiRxLBX9/IucO jcKQ== X-Gm-Message-State: AOAM5303uose6/9a1S6E7IIRzwBqvQ7WJIMXJKOL6+y5NxCE2t2tkdhv wMIpgnICMK6i7asqtTblinBRBw== X-Google-Smtp-Source: ABdhPJxBkYyDeMqg+OlqkRJ0ZOsCdWm1KltQZ9+g3/C6bPryvTmE1Oviffi01zfdU/xTwMGiInoe6w== X-Received: by 2002:a2e:895a:: with SMTP id b26mr6623334ljk.468.1600167685701; Tue, 15 Sep 2020 04:01:25 -0700 (PDT) Received: from gilgamesh.semihalf.com (193-106-246-138.noc.fibertech.net.pl. [193.106.246.138]) by smtp.gmail.com with ESMTPSA id n3sm4588916ljj.59.2020.09.15.04.01.24 (version=TLS1_2 cipher=ECDHE-ECDSA-AES128-GCM-SHA256 bits=128/128); Tue, 15 Sep 2020 04:01:25 -0700 (PDT) From: Grzegorz Jaszczyk To: tglx@linutronix.de, jason@lakedaemon.net, maz@kernel.org, s-anna@ti.com Cc: grzegorz.jaszczyk@linaro.org, robh+dt@kernel.org, lee.jones@linaro.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, david@lechnology.com, praneeth@ti.com Subject: [PATCH v6 5/5] irqchip/irq-pruss-intc: Add support for ICSSG INTC on K3 SoCs Date: Tue, 15 Sep 2020 13:00:51 +0200 Message-Id: <1600167651-20851-6-git-send-email-grzegorz.jaszczyk@linaro.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1600167651-20851-1-git-send-email-grzegorz.jaszczyk@linaro.org> References: <1600167651-20851-1-git-send-email-grzegorz.jaszczyk@linaro.org> Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org From: Suman Anna The K3 AM65x and J721E SoCs have the next generation of the PRU-ICSS IP, commonly called ICSSG. The PRUSS INTC present within the ICSSG supports more System Events (160 vs 64), more Interrupt Channels and Host Interrupts (20 vs 10) compared to the previous generation PRUSS INTC instances. The first 2 and the last 10 of these host interrupt lines are used by the PRU and other auxiliary cores and sub-modules within the ICSSG, with 8 host interrupts connected to MPU. The host interrupts 5, 6, 7 are also connected to the other ICSSG instances within the SoC and can be partitioned as per system integration through the board dts files. Enhance the PRUSS INTC driver to add support for this ICSSG INTC instance. Signed-off-by: Suman Anna Signed-off-by: Grzegorz Jaszczyk --- v5->v6: - No change. v4->v5: - Rename: s/num_host_intrs/num_host_events/ regarding to change introduced in patch #2. v3->v4: - Move generic part to "irqchip/irq-pruss-intc: Add a PRUSS irqchip driver for PRUSS interrupts" patch and leave only platform related code. v2->v3: - Change patch order: use it directly after "irqchip/irq-pruss-intc: Implement irq_{get,set}_irqchip_state ops" and before new "irqchip/irq-pruss-intc: Add event mapping support" in order to reduce diff. v1->v2: - https://patchwork.kernel.org/patch/11069773/ --- drivers/irqchip/Kconfig | 2 +- drivers/irqchip/irq-pruss-intc.c | 9 +++++++++ 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index 733e59f..25c8944 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -495,7 +495,7 @@ config TI_SCI_INTA_IRQCHIP config TI_PRUSS_INTC tristate "TI PRU-ICSS Interrupt Controller" - depends on ARCH_DAVINCI || SOC_AM33XX || SOC_AM43XX || SOC_DRA7XX || ARCH_KEYSTONE + depends on ARCH_DAVINCI || SOC_AM33XX || SOC_AM43XX || SOC_DRA7XX || ARCH_KEYSTONE || ARCH_K3 select IRQ_DOMAIN help This enables support for the PRU-ICSS Local Interrupt Controller diff --git a/drivers/irqchip/irq-pruss-intc.c b/drivers/irqchip/irq-pruss-intc.c index 41c6271..4be501e 100644 --- a/drivers/irqchip/irq-pruss-intc.c +++ b/drivers/irqchip/irq-pruss-intc.c @@ -628,11 +628,20 @@ static const struct pruss_intc_match_data pruss_intc_data = { .num_host_events = 10, }; +static const struct pruss_intc_match_data icssg_intc_data = { + .num_system_events = 160, + .num_host_events = 20, +}; + static const struct of_device_id pruss_intc_of_match[] = { { .compatible = "ti,pruss-intc", .data = &pruss_intc_data, }, + { + .compatible = "ti,icssg-intc", + .data = &icssg_intc_data, + }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, pruss_intc_of_match);