From patchwork Tue Jan 19 10:06:55 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 366525 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-18.8 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_CR_TRAILER, INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 4A335C433E6 for ; Tue, 19 Jan 2021 14:48:49 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 1B69820DD4 for ; Tue, 19 Jan 2021 14:48:49 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1732203AbhASOr4 (ORCPT ); Tue, 19 Jan 2021 09:47:56 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52856 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2389649AbhASKHn (ORCPT ); Tue, 19 Jan 2021 05:07:43 -0500 Received: from mail-lf1-x12b.google.com (mail-lf1-x12b.google.com [IPv6:2a00:1450:4864:20::12b]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4F3E2C0613D6 for ; Tue, 19 Jan 2021 02:07:01 -0800 (PST) Received: by mail-lf1-x12b.google.com with SMTP id o10so28210574lfl.13 for ; Tue, 19 Jan 2021 02:07:01 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=eUB+VRzHaFNDWANA7/7FL0Nbtz+9KcKdZ4XxgVZRnxs=; b=pNcqhqA/sssg/ZtmmEdNyGJ1l+sQ6M+232R/v2PJqdKkm8fSY/oheB3CERBAiniMS0 3KdB+VE+Nmp6qC/HOf8IdhgenB/fUL2EcQ0G178vp4EHtF7J8oP73VITxaK9touiF9u8 L7ohOV/y1zsc97OApeAmD/6urBkVchyUPfCBEhSssnId+n5PuSaRKIYDNJ6txOxBqmHc em23Vgb8QMQFfSPdxdcY6Mo7ele04maDZ0KyaDz73n41b7wFWRmjl87vZQUztjh1pDK9 9Pk5QMVuDb3e2vTjrCSyVUBvtUKSumr/JFuGdZwfnXmG8utJtbTIkjoNr/u/XOIgQFfD qjkQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=eUB+VRzHaFNDWANA7/7FL0Nbtz+9KcKdZ4XxgVZRnxs=; b=jKmyJPEZq4RmTIELAKOUnJYKFgXIwcVxblCamhB6YHantLPVkEDs2HpOIFCUhsdcb2 8/GwKn3YTuVutlJ3Hb77OBupt3ibQjULYY/Cw0t5QJhSnW90vtVxlNzqlAO+gTgiTcX7 ooUSs/YfE9GHulHI9Irfn6KZayZ4qcN0ZZFm5fgCzJOuVKECOUl0Ne2kKKTBvfsLAIf+ t8VcLco2VU/C8zQYnlxJYCu0LvfNRjFdsLKTYPg42LKKFWAwWrw1H8UgAPXLzYpOTzcu 3jlrTPx7c7hLJKHwZekkuzBFO2FPwlNJ4ENMXJr+9uL6T6vH/14ToDqE9emkm+EAxqK7 sB6Q== X-Gm-Message-State: AOAM532CZbf0EEzhqVAaHQnSCrFoyv4B7CgVb4O0YfMO9zKBoLXl7CtU hgTxZoL4XKpi+/zUShVovpwoH3JP+5P+xjg+ X-Google-Smtp-Source: ABdhPJyTT+nNCy+txQCw0fPQ/hLSK1JeNLsyxaAdblvN0/3s6IytPnjWn1CpEjJvPB6CAPdyqXeGNQ== X-Received: by 2002:ac2:4990:: with SMTP id f16mr1674453lfl.156.1611050819386; Tue, 19 Jan 2021 02:06:59 -0800 (PST) Received: from localhost.localdomain (c-92d7225c.014-348-6c756e10.bbcust.telenor.se. [92.34.215.146]) by smtp.gmail.com with ESMTPSA id g190sm2225581lfd.72.2021.01.19.02.06.58 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 19 Jan 2021 02:06:58 -0800 (PST) From: Linus Walleij To: linux-mmc@vger.kernel.org, Ulf Hansson Cc: Linus Walleij , devicetree@vger.kernel.org, Marek Vasut Subject: [PATCH v3] mmc: mmci: Convert bindings to DT schema Date: Tue, 19 Jan 2021 11:06:55 +0100 Message-Id: <20210119100655.2755164-1-linus.walleij@linaro.org> X-Mailer: git-send-email 2.29.2 MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org This converts the MMCI bindings from simple text to a proper schema. Cc: devicetree@vger.kernel.org Cc: Marek Vasut Signed-off-by: Linus Walleij --- ChangeLog v2->v3: - Drop "dmas" and "dma-names" that are already part of the generic schema. Sorry for missing this in v2. ChangeLog v1->v2: - Use unevaluatedProperties: false instead of additionalProperties: false and refs start working. - Define clocks to 1 or 2 items. - Define interrupts to 1 or 2 items. --- .../devicetree/bindings/mmc/arm,pl18x.yaml | 203 ++++++++++++++++++ .../devicetree/bindings/mmc/mmci.txt | 74 ------- 2 files changed, 203 insertions(+), 74 deletions(-) create mode 100644 Documentation/devicetree/bindings/mmc/arm,pl18x.yaml delete mode 100644 Documentation/devicetree/bindings/mmc/mmci.txt diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml new file mode 100644 index 000000000000..eddc1f6bdbe5 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml @@ -0,0 +1,203 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/arm,pl18x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM PrimeCell MultiMedia Card Interface (MMCI) PL180 and PL181 + +maintainers: + - Linus Walleij + - Ulf Hansson + +description: + The ARM PrimeCells MMCI PL180 and PL181 provides an interface for + reading and writing to MultiMedia and SD cards alike. Over the years + vendors have use the VHDL code from ARM to create derivative MMC/SD/SDIO + host controllers with very similar characteristics. + +allOf: + - $ref: /schemas/arm/primecell.yaml# + - $ref: mmc-controller.yaml# + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + enum: + - arm,pl180 + - arm,pl181 + - arm,pl18x + required: + - compatible + +properties: + compatible: + oneOf: + - description: The first version of the block, simply called + PL180 and found in the ARM Integrator IM/PD1 logic module. + items: + - const: arm,pl180 + - const: arm,primecell + - description: The improved version of the block, found in the + ARM Versatile and later reference designs. Further revisions + exist but get detected at runtime by reading some magic numbers + in the PrimeCell ID registers. + items: + - const: arm,pl181 + - const: arm,primecell + - description: Wildcard entry that will let the operating system + inspect the PrimeCell ID registers to determine which hardware + variant of PL180 or PL181 this is. + items: + - const: arm,pl18x + - const: arm,primecell + + clocks: + description: One or two clocks, the "apb_pclk" and the "MCLK" + which is the core block clock. The names are not compulsory. + minItems: 1 + maxItems: 2 + + power-domains: true + + resets: + maxItems: 1 + + reg: + description: the MMIO memory window must be exactly 4KB (0x1000) and the + layout should provide the PrimeCell ID registers so that the device can + be discovered. On ST Micro variants, a second register window may be + defined if a delay block is present and used for tuning. + + interrupts: + description: The first interrupt is the command interrupt and corresponds + to the event at the end of a command. The second interrupt is the + PIO (polled I/O) interrupt and occurs when the FIFO needs to be + emptied as part of a bulk read from the card. Some variants have these + two interrupts wired into the same line (logic OR) and in that case + only one interrupt may be provided. + minItems: 1 + maxItems: 2 + + st,sig-dir-dat0: + $ref: /schemas/types.yaml#/definitions/flag + description: ST Micro-specific property, bus signal direction pins used for + DAT[0]. + + st,sig-dir-dat2: + $ref: /schemas/types.yaml#/definitions/flag + description: ST Micro-specific property, bus signal direction pins used for + DAT[2]. + + st,sig-dir-dat31: + $ref: /schemas/types.yaml#/definitions/flag + description: ST Micro-specific property, bus signal direction pins used for + DAT[3] and DAT[1]. + + st,sig-dir-dat74: + $ref: /schemas/types.yaml#/definitions/flag + description: ST Micro-specific property, bus signal direction pins used for + DAT[7] and DAT[4]. + + st,sig-dir-cmd: + $ref: /schemas/types.yaml#/definitions/flag + description: ST Micro-specific property, CMD signal direction used for + pin CMD. + + st,sig-pin-fbclk: + $ref: /schemas/types.yaml#/definitions/flag + description: ST Micro-specific property, feedback clock FBCLK signal pin + in use. + + st,sig-dir: + $ref: /schemas/types.yaml#/definitions/flag + description: ST Micro-specific property, signal direction polarity used for + pins CMD, DAT[0], DAT[1], DAT[2] and DAT[3]. + + st,neg-edge: + $ref: /schemas/types.yaml#/definitions/flag + description: ST Micro-specific property, data and command phase relation, + generated on the sd clock falling edge. + + st,use-ckin: + $ref: /schemas/types.yaml#/definitions/flag + description: ST Micro-specific property, use CKIN pin from an external + driver to sample the receive data (for example with a voltage switch + transceiver). + +unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include + #include + + mmc@5000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x5000 0x1000>; + interrupts-extended = <&vic 22 &sic 1>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "mclk", "apb_pclk"; + }; + + mmc@80126000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x80126000 0x1000>; + interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma 29 0 0x2>, <&dma 29 0 0x0>; + dma-names = "rx", "tx"; + clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>; + clock-names = "sdi", "apb_pclk"; + max-frequency = <100000000>; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + cd-gpios = <&gpio2 31 0x4>; + st,sig-dir-dat0; + st,sig-dir-dat2; + st,sig-dir-cmd; + st,sig-pin-fbclk; + vmmc-supply = <&ab8500_ldo_aux3_reg>; + vqmmc-supply = <&vmmci>; + }; + + mmc@101f6000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x101f6000 0x1000>; + clocks = <&sdiclk>, <&pclksdi>; + clock-names = "mclk", "apb_pclk"; + interrupt-parent = <&vica>; + interrupts = <22>; + max-frequency = <400000>; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + full-pwr-cycle; + st,sig-dir-dat0; + st,sig-dir-dat2; + st,sig-dir-dat31; + st,sig-dir-cmd; + st,sig-pin-fbclk; + vmmc-supply = <&vmmc_regulator>; + }; + + mmc@52007000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x10153180>; + reg = <0x52007000 0x1000>; + interrupts = <49>; + interrupt-names = "cmd_irq"; + clocks = <&rcc 0>; + clock-names = "apb_pclk"; + resets = <&rcc 1>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + }; diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt deleted file mode 100644 index 4ec921e4bf34..000000000000 --- a/Documentation/devicetree/bindings/mmc/mmci.txt +++ /dev/null @@ -1,74 +0,0 @@ -* ARM PrimeCell MultiMedia Card Interface (MMCI) PL180/1 - -The ARM PrimeCell MMCI PL180 and PL181 provides an interface for -reading and writing to MultiMedia and SD cards alike. - -This file documents differences between the core properties described -by mmc.txt and the properties used by the mmci driver. Using "st" as -the prefix for a property, indicates support by the ST Micro variant. - -Required properties: -- compatible : contains "arm,pl18x", "arm,primecell". -- vmmc-supply : phandle to the regulator device tree node, mentioned - as the VCC/VDD supply in the eMMC/SD specs. - -Optional properties: -- arm,primecell-periphid : contains the PrimeCell Peripheral ID, it overrides - the ID provided by the HW -- resets : phandle to internal reset line. - Should be defined for sdmmc variant. -- vqmmc-supply : phandle to the regulator device tree node, mentioned - as the VCCQ/VDD_IO supply in the eMMC/SD specs. -specific for ux500 variant: -- st,sig-dir-dat0 : bus signal direction pin used for DAT[0]. -- st,sig-dir-dat2 : bus signal direction pin used for DAT[2]. -- st,sig-dir-dat31 : bus signal direction pin used for DAT[3] and DAT[1]. -- st,sig-dir-dat74 : bus signal direction pin used for DAT[4] to DAT[7]. -- st,sig-dir-cmd : cmd signal direction pin used for CMD. -- st,sig-pin-fbclk : feedback clock signal pin used. - -specific for sdmmc variant: -- reg : a second base register may be defined if a delay - block is present and used for tuning. -- st,sig-dir : signal direction polarity used for cmd, dat0 dat123. -- st,neg-edge : data & command phase relation, generated on - sd clock falling edge. -- st,use-ckin : use ckin pin from an external driver to sample - the receive data (example: with voltage - switch transceiver). - -Deprecated properties: -- mmc-cap-mmc-highspeed : indicates whether MMC is high speed capable. -- mmc-cap-sd-highspeed : indicates whether SD is high speed capable. - -Example: - -sdi0_per1@80126000 { - compatible = "arm,pl18x", "arm,primecell"; - reg = <0x80126000 0x1000>; - interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>; - - dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */ - <&dma 29 0 0x0>; /* Logical - MemToDev */ - dma-names = "rx", "tx"; - - clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>; - clock-names = "sdi", "apb_pclk"; - - max-frequency = <100000000>; - bus-width = <4>; - cap-sd-highspeed; - cap-mmc-highspeed; - cd-gpios = <&gpio2 31 0x4>; // 95 - st,sig-dir-dat0; - st,sig-dir-dat2; - st,sig-dir-cmd; - st,sig-pin-fbclk; - - vmmc-supply = <&ab8500_ldo_aux3_reg>; - vqmmc-supply = <&vmmci>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdi0_default_mode>; - pinctrl-1 = <&sdi0_sleep_mode>; -};