mfd: ab8500: add static linkage for battery info

From: "Rajanikanth H.V" <rajanikanth.hv@linaro.org>

enforce static linkage for battery attributes structures

this patch is against: "mfd-ab8500-add-devicetree-support-for-fuelgauge"

Signed-off-by: Rajanikanth H.V <rajanikanth.hv@linaro.org>
---
 drivers/power/ab8500_bmdata.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

How do you want this patch to be treated?

> From: "Rajanikanth H.V" <rajanikanth.hv@linaro.org>
> 
> enforce static linkage for battery attributes structures
> 
> this patch is against: "mfd-ab8500-add-devicetree-support-for-fuelgauge"

Is this a patch or a branch? If it's a branch, why are you referencing
it? Have you issued a pull request? If it's a patch (I'm assuming it
hasn't been accepted yet), then you should just fix it up into the
patch.

> Signed-off-by: Rajanikanth H.V <rajanikanth.hv@linaro.org>
> ---
>  drivers/power/ab8500_bmdata.c |    6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c
> index ff8f055..db17930 100644
> --- a/drivers/power/ab8500_bmdata.c
> +++ b/drivers/power/ab8500_bmdata.c
> @@ -143,7 +143,7 @@ static struct abx500_res_to_temp temp_tbl[] = {
>   * Note that the batres_vs_temp table must be strictly sorted by falling
>   * temperature values to work.
>   */
> -struct batres_vs_temp temp_to_batres_tbl_thermistor[] = {
> +static struct batres_vs_temp temp_to_batres_tbl_thermistor[] = {
>  	{ 40, 120},
>  	{ 30, 135},
>  	{ 20, 165},
> @@ -157,7 +157,7 @@ struct batres_vs_temp temp_to_batres_tbl_thermistor[] = {
>   * Note that the batres_vs_temp table must be strictly sorted by falling
>   * temperature values to work.
>   */
> -struct batres_vs_temp temp_to_batres_tbl_ext_thermistor[] = {
> +static struct batres_vs_temp temp_to_batres_tbl_ext_thermistor[] = {
>  	{ 60, 300},
>  	{ 30, 300},
>  	{ 20, 300},
> @@ -168,7 +168,7 @@ struct batres_vs_temp temp_to_batres_tbl_ext_thermistor[] = {
>  };
>  
>  /* battery resistance table for LI ION 9100 battery */
> -struct batres_vs_temp temp_to_batres_tbl_9100[] = {
> +static struct batres_vs_temp temp_to_batres_tbl_9100[] = {
>  	{ 60, 180},
>  	{ 30, 180},
>  	{ 20, 180},
> -- 
> 1.7.10.4
>

> How do you want this patch to be treated?
>
> Is this a patch or a branch? If it's a branch, why are you referencing
> it? Have you issued a pull request? If it's a patch (I'm assuming it
> hasn't been accepted yet), then you should just fix it up into the
> patch.

My apologies, I've just seen Anton's message to you.

> > From: "Rajanikanth H.V" <rajanikanth.hv@linaro.org>
> > 
> > enforce static linkage for battery attributes structures

    <subsystem>: Enforce static linkage for battery attributes structures
                 ^
                 Capital letter to start a sentence.

It's always worth doing `git log --oneline <subsystem>` to see how
the maintainer likes their $SUBJECT lines to be structured.

> > this patch is against: "mfd-ab8500-add-devicetree-support-for-fuelgauge"

There's no need to say this, please remove this line.

You also need a short description of what you're actually doing
in the patch.

> > Signed-off-by: Rajanikanth H.V <rajanikanth.hv@linaro.org>
> > ---
> >  drivers/power/ab8500_bmdata.c |    6 +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c
> > index ff8f055..db17930 100644
> > --- a/drivers/power/ab8500_bmdata.c
> > +++ b/drivers/power/ab8500_bmdata.c
> > @@ -143,7 +143,7 @@ static struct abx500_res_to_temp temp_tbl[] = {
> >   * Note that the batres_vs_temp table must be strictly sorted by falling
> >   * temperature values to work.
> >   */
> > -struct batres_vs_temp temp_to_batres_tbl_thermistor[] = {
> > +static struct batres_vs_temp temp_to_batres_tbl_thermistor[] = {
> >  	{ 40, 120},
> >  	{ 30, 135},
> >  	{ 20, 165},
> > @@ -157,7 +157,7 @@ struct batres_vs_temp temp_to_batres_tbl_thermistor[] = {
> >   * Note that the batres_vs_temp table must be strictly sorted by falling
> >   * temperature values to work.
> >   */
> > -struct batres_vs_temp temp_to_batres_tbl_ext_thermistor[] = {
> > +static struct batres_vs_temp temp_to_batres_tbl_ext_thermistor[] = {
> >  	{ 60, 300},
> >  	{ 30, 300},
> >  	{ 20, 300},
> > @@ -168,7 +168,7 @@ struct batres_vs_temp temp_to_batres_tbl_ext_thermistor[] = {
> >  };
> >  
> >  /* battery resistance table for LI ION 9100 battery */
> > -struct batres_vs_temp temp_to_batres_tbl_9100[] = {
> > +static struct batres_vs_temp temp_to_batres_tbl_9100[] = {
> >  	{ 60, 180},
> >  	{ 30, 180},
> >  	{ 20, 180},
> > -- 
> > 1.7.10.4
> > 
> 
> -- 
> Lee Jones
> Linaro ST-Ericsson Landing Team Lead
> Linaro.org │ Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog