diff mbox

[1/8] usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to Kconfig

Message ID 1459874197-14460-2-git-send-email-semen.protsenko@linaro.org
State New
Headers show

Commit Message

Sam Protsenko April 5, 2016, 4:36 p.m. UTC
From: Sam Protsenko <semen.protsenko@linaro.org>


The description was borrowed from kernel, but allowed range was changed
from 2..500 to 0..500, because some boards require this option to be 0.

Definitions were added to defconfig files in a way that
"make savedefconfig" generates exactly the same file as used defconfig.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>

---
 configs/A13-OLinuXino_defconfig           |  1 +
 configs/CHIP_defconfig                    |  1 +
 configs/Cubietruck_defconfig              |  1 +
 configs/bcm11130_defconfig                |  1 +
 configs/bcm11130_nand_defconfig           |  1 +
 configs/bcm28155_ap_defconfig             |  1 +
 configs/bcm28155_w1d_defconfig            |  1 +
 configs/kc1_defconfig                     |  1 +
 configs/omap3_beagle_defconfig            |  1 +
 configs/omap3_logic_defconfig             |  1 +
 configs/sniper_defconfig                  |  1 +
 configs/tbs2910_defconfig                 |  1 +
 drivers/usb/gadget/Kconfig                | 21 +++++++++++++++++++++
 include/configs/am335x_evm.h              |  1 -
 include/configs/am43xx_evm.h              |  5 ++++-
 include/configs/baltos.h                  |  1 -
 include/configs/bav335x.h                 |  1 -
 include/configs/bcm28155_ap.h             |  1 -
 include/configs/cgtqmx6eval.h             |  1 -
 include/configs/colibri_vf.h              |  1 -
 include/configs/corvus.h                  |  1 -
 include/configs/dra7xx_evm.h              |  1 -
 include/configs/exynos4-common.h          |  1 -
 include/configs/gw_ventana.h              |  1 -
 include/configs/kc1.h                     |  1 -
 include/configs/mx6sabre_common.h         |  1 -
 include/configs/mx7dsabresd.h             |  1 -
 include/configs/nitrogen6x.h              |  1 -
 include/configs/odroid_xu3.h              |  1 -
 include/configs/omap3_beagle.h            |  1 -
 include/configs/omap3_logic.h             |  1 -
 include/configs/omap5_uevm.h              |  1 -
 include/configs/pengwyn.h                 |  1 -
 include/configs/s5p_goni.h                |  1 -
 include/configs/siemens-am33x-common.h    |  1 -
 include/configs/smartweb.h                |  1 -
 include/configs/sniper.h                  |  1 -
 include/configs/socfpga_common.h          |  1 -
 include/configs/sunxi-common.h            |  1 -
 include/configs/taurus.h                  |  1 -
 include/configs/tbs2910.h                 |  1 -
 include/configs/tegra-common-usb-gadget.h |  1 -
 include/configs/warp.h                    |  1 -
 include/configs/xilinx_zynqmp.h           |  1 -
 include/configs/zynq-common.h             |  1 -
 45 files changed, 37 insertions(+), 32 deletions(-)

-- 
2.8.0.rc3

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Comments

Sam Protsenko April 7, 2016, 3:14 p.m. UTC | #1
On Tue, Apr 5, 2016 at 8:35 PM, Stephen Warren <swarren@wwwdotorg.org> wrote:
> On 04/05/2016 10:36 AM, Semen Protsenko wrote:

>>

>> From: Sam Protsenko <semen.protsenko@linaro.org>

>>

>> The description was borrowed from kernel, but allowed range was changed

>> from 2..500 to 0..500, because some boards require this option to be 0.

>

>

> Do they /require/ the value to be 0, or simply currently have it set to 0

> because whoever set the value in U-Boot wasn't aware that a value of 0 could

> cause issues with some hosts?

>

> I'd be tempted to keep the same range as the Linux kernel and bump all

> boards up to a minimum value of 2. Presumably there's some good reason the

> kernel chose a minimum of 2, and in practice I expect increasing all boards

> to 2 isn't going to make any negative difference.

>

>> diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig

>

>

>> +config USB_GADGET_VBUS_DRAW

>> +       int "Maximum VBUS Power usage (2-500 mA)"

>> +       range 0 500

>> +       default 2

>> +       help

>> +          Some devices need to draw power from USB when they are

>> +          configured, perhaps to operate circuitry or to recharge

>> +          batteries.  This is in addition to any local power supply,

>> +          such as an AC adapter or batteries.

>> +

>> +          Enter the maximum power your device draws through USB, in

>> +          milliAmperes.  The permitted range of values is 2 - 500 mA;

>> +          0 mA would be legal, but can make some hosts misbehave.

>

>

> In particular, I'm thinking of that last sentence.


I've sent v2 of this patch. Please review.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
diff mbox

Patch

diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig
index 45ec575..f022ba3 100644
--- a/configs/A13-OLinuXino_defconfig
+++ b/configs/A13-OLinuXino_defconfig
@@ -23,3 +23,4 @@  CONFIG_CMD_GPIO=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VBUS_DRAW=0
diff --git a/configs/CHIP_defconfig b/configs/CHIP_defconfig
index f6346de..6c9a25f 100644
--- a/configs/CHIP_defconfig
+++ b/configs/CHIP_defconfig
@@ -14,3 +14,4 @@  CONFIG_AXP_ALDO3_VOLT=3300
 CONFIG_AXP_ALDO4_VOLT=3300
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VBUS_DRAW=0
diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig
index 0599472..7400d8d 100644
--- a/configs/Cubietruck_defconfig
+++ b/configs/Cubietruck_defconfig
@@ -20,3 +20,4 @@  CONFIG_ETH_DESIGNWARE=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VBUS_DRAW=0
diff --git a/configs/bcm11130_defconfig b/configs/bcm11130_defconfig
index 222c319..d6e13c0 100644
--- a/configs/bcm11130_defconfig
+++ b/configs/bcm11130_defconfig
@@ -10,3 +10,4 @@  CONFIG_CMD_GPIO=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VBUS_DRAW=0
diff --git a/configs/bcm11130_nand_defconfig b/configs/bcm11130_nand_defconfig
index 7e1e682..8cb654b 100644
--- a/configs/bcm11130_nand_defconfig
+++ b/configs/bcm11130_nand_defconfig
@@ -10,3 +10,4 @@  CONFIG_CMD_GPIO=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VBUS_DRAW=0
diff --git a/configs/bcm28155_ap_defconfig b/configs/bcm28155_ap_defconfig
index ba57944..eb6a609 100644
--- a/configs/bcm28155_ap_defconfig
+++ b/configs/bcm28155_ap_defconfig
@@ -9,3 +9,4 @@  CONFIG_CMD_GPIO=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VBUS_DRAW=0
diff --git a/configs/bcm28155_w1d_defconfig b/configs/bcm28155_w1d_defconfig
index 36849d5..21d83d4 100644
--- a/configs/bcm28155_w1d_defconfig
+++ b/configs/bcm28155_w1d_defconfig
@@ -10,3 +10,4 @@  CONFIG_CMD_GPIO=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VBUS_DRAW=0
diff --git a/configs/kc1_defconfig b/configs/kc1_defconfig
index 06698b8..73c89b5 100644
--- a/configs/kc1_defconfig
+++ b/configs/kc1_defconfig
@@ -13,4 +13,5 @@  CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VBUS_DRAW=0
 CONFIG_OF_LIBFDT=y
diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig
index 798a7e5..1aa89df 100644
--- a/configs/omap3_beagle_defconfig
+++ b/configs/omap3_beagle_defconfig
@@ -9,4 +9,5 @@  CONFIG_CMD_GPIO=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VBUS_DRAW=0
 CONFIG_OF_LIBFDT=y
diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig
index 02202d5..332d2de 100644
--- a/configs/omap3_logic_defconfig
+++ b/configs/omap3_logic_defconfig
@@ -13,4 +13,5 @@  CONFIG_CMD_GPIO=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VBUS_DRAW=0
 CONFIG_OF_LIBFDT=y
diff --git a/configs/sniper_defconfig b/configs/sniper_defconfig
index 313c489..7756b7f 100644
--- a/configs/sniper_defconfig
+++ b/configs/sniper_defconfig
@@ -13,4 +13,5 @@  CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VBUS_DRAW=0
 CONFIG_OF_LIBFDT=y
diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig
index d0fda48..3f21e54 100644
--- a/configs/tbs2910_defconfig
+++ b/configs/tbs2910_defconfig
@@ -10,4 +10,5 @@  CONFIG_DM=y
 CONFIG_DM_THERMAL=y
 CONFIG_USB=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VBUS_DRAW=0
 CONFIG_OF_LIBFDT=y
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index f4698f4..17ca316 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -33,3 +33,24 @@  menuconfig USB_GADGET
 	   a USB peripheral device.  Configure one hardware driver for your
 	   peripheral/device side bus controller, and a "gadget driver" for
 	   your peripheral protocol.
+
+if USB_GADGET
+
+config USB_GADGET_VBUS_DRAW
+	int "Maximum VBUS Power usage (2-500 mA)"
+	range 0 500
+	default 2
+	help
+	   Some devices need to draw power from USB when they are
+	   configured, perhaps to operate circuitry or to recharge
+	   batteries.  This is in addition to any local power supply,
+	   such as an AC adapter or batteries.
+
+	   Enter the maximum power your device draws through USB, in
+	   milliAmperes.  The permitted range of values is 2 - 500 mA;
+	   0 mA would be legal, but can make some hosts misbehave.
+
+	   This value will be used except for system-specific gadget
+	   drivers that have more specific information.
+
+endif # USB_GADGET
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 29b693a..8d68d60 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -290,7 +290,6 @@ 
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 #define CONFIG_USB_MUSB_HOST
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index fd3f6a7..0dd9c7a7 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -122,6 +122,10 @@ 
 #endif
 
 /* USB GADGET */
+#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USBETH_SUPPORT)
+#undef CONFIG_USB_GADGET_VBUS_DRAW
+#endif
+
 #if !defined(CONFIG_SPL_BUILD) || \
 	(defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT))
 #define CONFIG_USB_DWC3_PHY_OMAP
@@ -130,7 +134,6 @@ 
 #define CONFIG_USB_DWC3_GADGET
 
 #define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW 2
 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
 #define CONFIG_G_DNL_VENDOR_NUM 0x0403
 #define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
diff --git a/include/configs/baltos.h b/include/configs/baltos.h
index bfe3fa3..529cf1c 100644
--- a/include/configs/baltos.h
+++ b/include/configs/baltos.h
@@ -276,7 +276,6 @@ 
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_USBDOWNLOAD_GADGET
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 #define CONFIG_USB_MUSB_HOST
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE	MUSB_HOST
diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h
index 6c860a6..82bf92a 100644
--- a/include/configs/bav335x.h
+++ b/include/configs/bav335x.h
@@ -441,7 +441,6 @@  DEFAULT_LINUX_BOOT_ENV \
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 #define CONFIG_USB_MUSB_HOST
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h
index cf25bde..387895b 100644
--- a/include/configs/bcm28155_ap.h
+++ b/include/configs/bcm28155_ap.h
@@ -139,7 +139,6 @@ 
 #define CONFIG_FASTBOOT_BUF_SIZE	(CONFIG_SYS_SDRAM_SIZE - SZ_1M)
 #define CONFIG_FASTBOOT_BUF_ADDR	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	0
 #define CONFIG_USB_GADGET_DWC2_OTG
 #define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY
 #define CONFIG_USB_GADGET_DOWNLOAD
diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h
index 63e3b94..3f3b69d 100644
--- a/include/configs/cgtqmx6eval.h
+++ b/include/configs/cgtqmx6eval.h
@@ -93,7 +93,6 @@ 
 #define CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 
 #define CONFIG_G_DNL_VENDOR_NUM		0x0525
 #define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 7f57a54..63dbe12 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -235,7 +235,6 @@ 
 /* USB Client Support */
 #define CONFIG_CI_UDC
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW      2
 #define CONFIG_TRDX_VID                  0x1B67
 #define CONFIG_TRDX_PID_COLIBRI_VF50     0x0016
 #define CONFIG_TRDX_PID_COLIBRI_VF61     0x0017
diff --git a/include/configs/corvus.h b/include/configs/corvus.h
index fcf2bd6..b8c441e 100644
--- a/include/configs/corvus.h
+++ b/include/configs/corvus.h
@@ -125,7 +125,6 @@ 
 #define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_DFU_NAND
 #define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	(SZ_1M)
 #define DFU_MANIFEST_POLL_TIMEOUT	25000
 
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 7734e8d..e9facae 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -233,7 +233,6 @@ 
 #define CONFIG_USB_DWC3_GADGET
 
 #define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW 2
 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
 #define CONFIG_G_DNL_VENDOR_NUM 0x0451
 #define CONFIG_G_DNL_PRODUCT_NUM 0xd022
diff --git a/include/configs/exynos4-common.h b/include/configs/exynos4-common.h
index 008d24c..c8e5397 100644
--- a/include/configs/exynos4-common.h
+++ b/include/configs/exynos4-common.h
@@ -53,7 +53,6 @@ 
 #define CONFIG_USB_GADGET_DWC2_OTG
 #define CONFIG_USB_GADGET_DWC2_OTG_PHY
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 
 #define CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index 793b3fb..62f3468 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -196,7 +196,6 @@ 
 #define CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW    2
 
 /* Netchip IDs */
 #define CONFIG_G_DNL_VENDOR_NUM 0x0525
diff --git a/include/configs/kc1.h b/include/configs/kc1.h
index ee7d9ce..d8aa182 100644
--- a/include/configs/kc1.h
+++ b/include/configs/kc1.h
@@ -185,7 +185,6 @@ 
 #define CONFIG_USB_MUSB_OMAP2PLUS
 
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	0
 
 /*
  * Download
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index ceea74e..299f11b 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -241,7 +241,6 @@ 
 #define CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 
 #define CONFIG_G_DNL_VENDOR_NUM		0x0525
 #define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
index 5d897c2..506ac32 100644
--- a/include/configs/mx7dsabresd.h
+++ b/include/configs/mx7dsabresd.h
@@ -256,7 +256,6 @@ 
 #define CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 
 #define CONFIG_G_DNL_VENDOR_NUM		0x0525
 #define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index 3604e44..a50829e 100644
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -333,7 +333,6 @@ 
 #define CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 
 /* Netchip IDs */
 #define CONFIG_G_DNL_VENDOR_NUM 0x0525
diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h
index 01d08dc..e4986b0 100644
--- a/include/configs/odroid_xu3.h
+++ b/include/configs/odroid_xu3.h
@@ -54,7 +54,6 @@ 
 
 /* USB gadget */
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 
 /* Downloader */
 #define CONFIG_G_DNL_VENDOR_NUM		0x04E8
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 2112d9f..17d8a86 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -66,7 +66,6 @@ 
 #define CONFIG_TWL4030_USB		1
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETHER_RNDIS
-#define CONFIG_USB_GADGET_VBUS_DRAW	0
 #define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_G_DNL_VENDOR_NUM		0x0451
 #define CONFIG_G_DNL_PRODUCT_NUM	0xd022
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 304e1ce..7e802e9 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -85,7 +85,6 @@ 
 #define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETHER_RNDIS
-#define CONFIG_USB_GADGET_VBUS_DRAW	0
 #define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_G_DNL_VENDOR_NUM		0x0451
 #define CONFIG_G_DNL_PRODUCT_NUM	0xd022
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index a5cfa0c..09beb74 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -106,7 +106,6 @@ 
 #define CONFIG_USB_DWC3_GADGET
 
 #define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW 2
 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
 #define CONFIG_G_DNL_VENDOR_NUM 0x0403
 #define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h
index 1a670cb..ec3fcba 100644
--- a/include/configs/pengwyn.h
+++ b/include/configs/pengwyn.h
@@ -200,7 +200,6 @@ 
 #define CONFIG_USB_MUSB_PIO_ONLY
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 #define CONFIG_USB_MUSB_HOST
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index 07a5134..919c60e 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -273,7 +273,6 @@ 
 #define CONFIG_USB_GADGET_DWC2_OTG
 #define CONFIG_USB_GADGET_DWC2_OTG_PHY
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW 2
 #define CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index df2a514..df4e734 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -225,7 +225,6 @@ 
 #define CONFIG_USB_MUSB_PIO_ONLY
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #undef CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 #define CONFIG_USB_MUSB_HOST
 
 #define CONFIG_AM335X_USB0
diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h
index db820ba..0586aec 100644
--- a/include/configs/smartweb.h
+++ b/include/configs/smartweb.h
@@ -176,7 +176,6 @@ 
 #define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_DFU_NAND
 #define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	SZ_1M
 #define DFU_MANIFEST_POLL_TIMEOUT	25000
 
diff --git a/include/configs/sniper.h b/include/configs/sniper.h
index 18a379d..12090a3 100644
--- a/include/configs/sniper.h
+++ b/include/configs/sniper.h
@@ -202,7 +202,6 @@ 
 #define CONFIG_TWL4030_USB
 
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	0
 
 /*
  * Download
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index 07519c1..a42e6d7 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -254,7 +254,6 @@  unsigned int cm_get_qspi_controller_clk_hz(void);
 #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE)
 #define CONFIG_USB_GADGET_DWC2_OTG
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 
 /* USB Composite download gadget - g_dnl */
 #define CONFIG_USB_GADGET_DOWNLOAD
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 8f11eb9..b5d05cd 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -343,7 +343,6 @@  extern int soft_i2c_gpio_scl;
 
 #ifdef CONFIG_USB_MUSB_GADGET
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	0
 
 #define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USB_FUNCTION_DFU
diff --git a/include/configs/taurus.h b/include/configs/taurus.h
index 5b190f6..0b04b3a 100644
--- a/include/configs/taurus.h
+++ b/include/configs/taurus.h
@@ -140,7 +140,6 @@ 
 #define CONFIG_USB_FUNCTION_DFU
 #define CONFIG_DFU_NAND
 #define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	(SZ_1M)
 #define DFU_MANIFEST_POLL_TIMEOUT	25000
 
diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index 1b5046a..715994c 100644
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -132,7 +132,6 @@ 
 #define CONFIG_USBD_HS
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	0
 #define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_G_DNL_VENDOR_NUM		0x0525
 #define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
diff --git a/include/configs/tegra-common-usb-gadget.h b/include/configs/tegra-common-usb-gadget.h
index c3a0151..ec034a1 100644
--- a/include/configs/tegra-common-usb-gadget.h
+++ b/include/configs/tegra-common-usb-gadget.h
@@ -10,7 +10,6 @@ 
 
 #ifndef CONFIG_SPL_BUILD
 /* USB gadget mode support*/
-#define CONFIG_USB_GADGET_VBUS_DRAW    2
 #define CONFIG_CI_UDC
 #define CONFIG_CI_UDC_HAS_HOSTPC
 #define CONFIG_USB_GADGET_DUALSPEED
diff --git a/include/configs/warp.h b/include/configs/warp.h
index cb93629..80c4e38 100644
--- a/include/configs/warp.h
+++ b/include/configs/warp.h
@@ -81,7 +81,6 @@ 
 #define CONFIG_CMD_USB_MASS_STORAGE
 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 #define CONFIG_USB_GADGET_DOWNLOAD
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 
 #define CONFIG_G_DNL_VENDOR_NUM		0x0525
 #define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 8cea610..3a96483 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -130,7 +130,6 @@ 
 
 #define CONFIG_USB_GADGET_DOWNLOAD
 #define CONFIG_USB_GADGET_DUALSPEED
-#define CONFIG_USB_GADGET_VBUS_DRAW	2
 #define CONFIG_USBDOWNLOAD_GADGET
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	0x1800000
 #define DFU_DEFAULT_POLL_TIMEOUT	300
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index d8e3fa4..941372d 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -107,7 +107,6 @@ 
 # define DFU_DEFAULT_POLL_TIMEOUT	300
 # define CONFIG_USB_FUNCTION_DFU
 # define CONFIG_DFU_RAM
-# define CONFIG_USB_GADGET_VBUS_DRAW	2
 # define CONFIG_G_DNL_VENDOR_NUM	0x03FD
 # define CONFIG_G_DNL_PRODUCT_NUM	0x0300
 # define CONFIG_G_DNL_MANUFACTURER	"Xilinx"