diff mbox

[v3,5/5] ACPI: do not map/unmap memory regions for FADT entries in reduced HW mode

Message ID 1386192127-28564-6-git-send-email-al.stone@linaro.org
State New
Headers show

Commit Message

Al Stone Dec. 4, 2013, 9:22 p.m. UTC
From: Al Stone <al.stone@linaro.org>

Several of the FADT fields are normally kept in specific memory
regions.  Since these fields are to be ignored in hardware reduced
ACPI mode, do not map those addresses when in that mode, and of
course do not release the mappings that have not been made.

The function acpi_os_initialize() could become a stub in the header
file but is left here in case it can be of further use.

Signed-off-by: Al Stone <al.stone@linaro.org>
---
 drivers/acpi/osl.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

Comments

Grant Likely Dec. 10, 2013, 12:40 p.m. UTC | #1
On Wed,  4 Dec 2013 14:22:07 -0700, al.stone@linaro.org wrote:
> From: Al Stone <al.stone@linaro.org>
> 
> Several of the FADT fields are normally kept in specific memory
> regions.  Since these fields are to be ignored in hardware reduced
> ACPI mode, do not map those addresses when in that mode, and of
> course do not release the mappings that have not been made.
> 
> The function acpi_os_initialize() could become a stub in the header
> file but is left here in case it can be of further use.
> 
> Signed-off-by: Al Stone <al.stone@linaro.org>
> ---
>  drivers/acpi/osl.c | 20 ++++++++++++--------
>  1 file changed, 12 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
> index 613e4a1..3a0bb92 100644
> --- a/drivers/acpi/osl.c
> +++ b/drivers/acpi/osl.c
> @@ -1776,10 +1776,12 @@ __setup("acpi_no_auto_ssdt", acpi_no_auto_ssdt_setup);
>  
>  acpi_status __init acpi_os_initialize(void)
>  {
> -	acpi_os_map_generic_address(&acpi_gbl_FADT.xpm1a_event_block);
> -	acpi_os_map_generic_address(&acpi_gbl_FADT.xpm1b_event_block);
> -	acpi_os_map_generic_address(&acpi_gbl_FADT.xgpe0_block);
> -	acpi_os_map_generic_address(&acpi_gbl_FADT.xgpe1_block);
> +	if (!acpi_gbl_reduced_hardware) {
> +		acpi_os_map_generic_address(&acpi_gbl_FADT.xpm1a_event_block);
> +		acpi_os_map_generic_address(&acpi_gbl_FADT.xpm1b_event_block);
> +		acpi_os_map_generic_address(&acpi_gbl_FADT.xgpe0_block);
> +		acpi_os_map_generic_address(&acpi_gbl_FADT.xgpe1_block);
> +	}

So, I'm confused. This patch is making the hardware reduced decision at
runtime (which is good), but the other patches are using #ifdef blocks
to take the code right out. Why the discrepancy?

g.
diff mbox

Patch

diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 613e4a1..3a0bb92 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -1776,10 +1776,12 @@  __setup("acpi_no_auto_ssdt", acpi_no_auto_ssdt_setup);
 
 acpi_status __init acpi_os_initialize(void)
 {
-	acpi_os_map_generic_address(&acpi_gbl_FADT.xpm1a_event_block);
-	acpi_os_map_generic_address(&acpi_gbl_FADT.xpm1b_event_block);
-	acpi_os_map_generic_address(&acpi_gbl_FADT.xgpe0_block);
-	acpi_os_map_generic_address(&acpi_gbl_FADT.xgpe1_block);
+	if (!acpi_gbl_reduced_hardware) {
+		acpi_os_map_generic_address(&acpi_gbl_FADT.xpm1a_event_block);
+		acpi_os_map_generic_address(&acpi_gbl_FADT.xpm1b_event_block);
+		acpi_os_map_generic_address(&acpi_gbl_FADT.xgpe0_block);
+		acpi_os_map_generic_address(&acpi_gbl_FADT.xgpe1_block);
+	}
 
 	return AE_OK;
 }
@@ -1804,10 +1806,12 @@  acpi_status acpi_os_terminate(void)
 						 acpi_irq_handler);
 	}
 
-	acpi_os_unmap_generic_address(&acpi_gbl_FADT.xgpe1_block);
-	acpi_os_unmap_generic_address(&acpi_gbl_FADT.xgpe0_block);
-	acpi_os_unmap_generic_address(&acpi_gbl_FADT.xpm1b_event_block);
-	acpi_os_unmap_generic_address(&acpi_gbl_FADT.xpm1a_event_block);
+	if (!acpi_gbl_reduced_hardware) {
+		acpi_os_unmap_generic_address(&acpi_gbl_FADT.xgpe1_block);
+		acpi_os_unmap_generic_address(&acpi_gbl_FADT.xgpe0_block);
+		acpi_os_unmap_generic_address(&acpi_gbl_FADT.xpm1b_event_block);
+		acpi_os_unmap_generic_address(&acpi_gbl_FADT.xpm1a_event_block);
+	}
 
 	destroy_workqueue(kacpid_wq);
 	destroy_workqueue(kacpi_notify_wq);