| Message ID | 20170511121258.3521041-1-arnd@arndb.de |
|---|---|
| State | Accepted |
| Commit | be0408d74d9c95de1baf6c2563b6e6d1dfb17b88 |
| Headers | show |
On Thu, May 11, 2017 at 2:12 PM, Arnd Bergmann <arnd@arndb.de> wrote: > Moving the cooling code into the cpufreq driver caused a possible build failure > when the cpu_thermal helper code is a loadable module or disabled: > > drivers/cpufreq/dbx500-cpufreq.o: In function `dbx500_cpufreq_ready': > dbx500-cpufreq.c:(.text.dbx500_cpufreq_ready+0x4): undefined reference to `cpufreq_cooling_register' > > This adds the same dependency that we have in other cpufreq drivers, > forcing the driver to be disabled when we can't possibly link it. > > Fixes: 19678ffb9fd6 ("cpufreq: dbx500: Manage cooling device from cpufreq driver") > Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 74ed7e9a7f27..2011fec2d6ad 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -71,6 +71,15 @@ config ARM_HIGHBANK_CPUFREQ If in doubt, say N. +config ARM_DB8500_CPUFREQ + tristate "ST-Ericsson DB8500 cpufreq" if COMPILE_TEST && !ARCH_U8500 + default ARCH_U8500 + depends on HAS_IOMEM + depends on !CPU_THERMAL || THERMAL + help + This adds the CPUFreq driver for ST-Ericsson Ux500 (DB8500) SoC + series. + config ARM_IMX6Q_CPUFREQ tristate "Freescale i.MX6 cpufreq support" depends on ARCH_MXC diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index b7e78f063c4f..ab3a42cd29ef 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -53,7 +53,7 @@ obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ) += brcmstb-avs-cpufreq.o obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o -obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o +obj-$(CONFIG_ARM_DB8500_CPUFREQ) += dbx500-cpufreq.o obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
Moving the cooling code into the cpufreq driver caused a possible build failure when the cpu_thermal helper code is a loadable module or disabled: drivers/cpufreq/dbx500-cpufreq.o: In function `dbx500_cpufreq_ready': dbx500-cpufreq.c:(.text.dbx500_cpufreq_ready+0x4): undefined reference to `cpufreq_cooling_register' This adds the same dependency that we have in other cpufreq drivers, forcing the driver to be disabled when we can't possibly link it. Fixes: 19678ffb9fd6 ("cpufreq: dbx500: Manage cooling device from cpufreq driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- drivers/cpufreq/Kconfig.arm | 9 +++++++++ drivers/cpufreq/Makefile | 2 +- 2 files changed, 10 insertions(+), 1 deletion(-) -- 2.9.0