diff mbox series

[v6,07/13] media: dt-bindings: add bindings for i.MX7 media driver

Message ID 20180522145245.3143-8-rui.silva@linaro.org
State Superseded
Headers show
Series media: staging/imx7: add i.MX7 media driver | expand

Commit Message

Rui Miguel Silva May 22, 2018, 2:52 p.m. UTC
Add bindings documentation for i.MX7 media drivers.
The imx7 MIPI CSI2 and imx7 CMOS Sensor Interface.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>

---
 .../devicetree/bindings/media/imx7-csi.txt    | 44 ++++++++++
 .../bindings/media/imx7-mipi-csi2.txt         | 82 +++++++++++++++++++
 2 files changed, 126 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/imx7-csi.txt
 create mode 100644 Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt

-- 
2.17.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Rob Herring (Arm) May 22, 2018, 4:10 p.m. UTC | #1
On Tue, May 22, 2018 at 03:52:39PM +0100, Rui Miguel Silva wrote:
> Add bindings documentation for i.MX7 media drivers.

> The imx7 MIPI CSI2 and imx7 CMOS Sensor Interface.

> 

> Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>

> ---

>  .../devicetree/bindings/media/imx7-csi.txt    | 44 ++++++++++

>  .../bindings/media/imx7-mipi-csi2.txt         | 82 +++++++++++++++++++

>  2 files changed, 126 insertions(+)

>  create mode 100644 Documentation/devicetree/bindings/media/imx7-csi.txt

>  create mode 100644 Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt


Reviewed-by: Rob Herring <robh@kernel.org>

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Rui Miguel Silva Aug. 2, 2018, 4:48 p.m. UTC | #2
Hi Sakari,
Thanks for the review.

I will take this in account when preparing the v7, all your 
comments
bellow look reasonable to me.

---
Cheers,
	Rui

On Thu 02 Aug 2018 at 14:00, Sakari Ailus wrote:
> Hi Rui,

>

> On Tue, May 22, 2018 at 03:52:39PM +0100, Rui Miguel Silva 

> wrote:

>> Add bindings documentation for i.MX7 media drivers.

>> The imx7 MIPI CSI2 and imx7 CMOS Sensor Interface.

>> 

>> Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>

>> ---

>>  .../devicetree/bindings/media/imx7-csi.txt    | 44 ++++++++++

>>  .../bindings/media/imx7-mipi-csi2.txt         | 82 

>>  +++++++++++++++++++

>>  2 files changed, 126 insertions(+)

>>  create mode 100644 

>>  Documentation/devicetree/bindings/media/imx7-csi.txt

>>  create mode 100644 

>>  Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt

>> 

>> diff --git 

>> a/Documentation/devicetree/bindings/media/imx7-csi.txt 

>> b/Documentation/devicetree/bindings/media/imx7-csi.txt

>> new file mode 100644

>> index 000000000000..aab4f5d72390

>> --- /dev/null

>> +++ b/Documentation/devicetree/bindings/media/imx7-csi.txt

>> @@ -0,0 +1,44 @@

>> +Freescale i.MX7 CMOS Sensor Interface

>> +=====================================

>> +

>> +csi node

>> +--------

>> +

>> +This is device node for the CMOS Sensor Interface (CSI) which 

>> enables the chip

>> +to connect directly to external CMOS image sensors.

>> +

>> +Required properties:

>> +

>> +- compatible    : "fsl,imx7-csi";

>> +- reg           : base address and length of the register set 

>> for the device;

>> +- interrupts    : should contain CSI interrupt;

>> +- clocks        : list of clock specifiers, see

>> + 

>> Documentation/devicetree/bindings/clock/clock-bindings.txt for 

>> details;

>> +- clock-names   : must contain "axi", "mclk" and "dcic" 

>> entries, matching

>> +                 entries in the clock property;

>> +

>> +The device node should contain one 'port' child node with one 

>> child 'endpoint'

>

> "should" or "shall"?

>

>> +node, according to the bindings defined in 

>> Documentation/devicetree/bindings/

>> +media/video-interfaces.txt. In the following example a remote 

>> endpoint is a

>

> I wouldn't split the path as it breaks copy-paste; up to you.

>

>> +video multiplexer.

>> +

>> +example:

>> +

>> +                csi: csi@30710000 {

>> +                        #address-cells = <1>;

>> +                        #size-cells = <0>;

>> +

>> +                        compatible = "fsl,imx7-csi";

>> +                        reg = <0x30710000 0x10000>;

>> +                        interrupts = <GIC_SPI 7 

>> IRQ_TYPE_LEVEL_HIGH>;

>> +                        clocks = <&clks IMX7D_CLK_DUMMY>,

>> +                                        <&clks 

>> IMX7D_CSI_MCLK_ROOT_CLK>,

>> +                                        <&clks 

>> IMX7D_CLK_DUMMY>;

>> +                        clock-names = "axi", "mclk", "dcic";

>> +

>> +                        port {

>> +                                csi_from_csi_mux: endpoint {

>> +                                        remote-endpoint = 

>> <&csi_mux_to_csi>;

>> +                                };

>> +                        };

>> +                };

>> diff --git 

>> a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt 

>> b/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt

>> new file mode 100644

>> index 000000000000..7c5f20863724

>> --- /dev/null

>> +++ 

>> b/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt

>> @@ -0,0 +1,82 @@

>> +Freescale i.MX7 Mipi CSI2

>> +=========================

>> +

>> +mipi_csi2 node

>> +--------------

>> +

>> +This is the device node for the MIPI CSI-2 receiver core in 

>> i.MX7 SoC. It is

>> +compatible with previous version of Samsung D-phy.

>> +

>> +Required properties:

>> +

>> +- compatible    : "fsl,imx7-mipi-csi2";

>> +- reg           : base address and length of the register set 

>> for the device;

>> +- interrupts    : should contain MIPI CSIS interrupt;

>> +- clocks        : list of clock specifiers, see

>> + 

>> Documentation/devicetree/bindings/clock/clock-bindings.txt for 

>> details;

>> +- clock-names   : must contain "pclk", "wrap" and "phy" 

>> entries, matching

>> +                  entries in the clock property;

>> +- power-domains : a phandle to the power domain, see

>> + 

>> Documentation/devicetree/bindings/power/power_domain.txt for 

>> details.

>> +- reset-names   : should include following entry "mrst";

>> +- resets        : a list of phandle, should contain reset 

>> entry of

>> +                  reset-names;

>> +- phy-supply    : from the generic phy bindings, a phandle to 

>> a regulator that

>> +	          provides power to MIPI CSIS core;

>> +

>> +Optional properties:

>> +

>> +- clock-frequency : The IP's main (system bus) clock frequency 

>> in Hz, default

>> +		    value when this property is not specified is 

>> 166 MHz;

>> +- fsl,csis-hs-settle : differential receiver (HS-RX) settle 

>> time;

>> +

>> +port node

>> +---------

>> +

>> +- reg		  : (required) can take the values 0 or 1, 

>> where 0 is the

>> +                     related sink port and port 1 should be 

>> the source one;

>

> Should and is -> shall?

>

> I think you should also elaborate whether or not the port (as 

> well as the

> endpoint) nodes themselves are mandatory.

>

>> +

>> +endpoint node

>> +-------------

>> +

>> +- data-lanes    : (required) an array specifying active 

>> physical MIPI-CSI2

>> +		    data input lanes and their mapping to logical 

>> lanes; the

>> +		    array's content is unused, only its length is 

>> meaningful;

>

> If this is for port 0 only, please document that. Which values 

> (length) are

> allowed?

>

>> +

>> +example:

>> +

>> +        mipi_csi: mipi-csi@30750000 {

>> +                #address-cells = <1>;

>> +                #size-cells = <0>;

>> +

>> +                compatible = "fsl,imx7-mipi-csi2";

>> +                reg = <0x30750000 0x10000>;

>> +                interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;

>> +                clocks = <&clks IMX7D_IPG_ROOT_CLK>,

>> +                                <&clks 

>> IMX7D_MIPI_CSI_ROOT_CLK>,

>> +                                <&clks 

>> IMX7D_MIPI_DPHY_ROOT_CLK>;

>> +                clock-names = "pclk", "wrap", "phy";

>> +                clock-frequency = <166000000>;

>> +                power-domains = <&pgc_mipi_phy>;

>> +                phy-supply = <&reg_1p0d>;

>> +                resets = <&src IMX7_RESET_MIPI_PHY_MRST>;

>> +                reset-names = "mrst";

>> +                fsl,csis-hs-settle = <3>;

>> +

>> +                port@0 {

>> +                        reg = <0>;

>> +

>> +                        mipi_from_sensor: endpoint {

>> +                                remote-endpoint = 

>> <&ov2680_to_mipi>;

>> +                                data-lanes = <1>;

>> +                        };

>> +                };

>> +

>> +                port@1 {

>> +                        reg = <1>;

>> +

>> +                        mipi_vc0_to_csi_mux: endpoint {

>> +                                remote-endpoint = 

>> <&csi_mux_from_mipi_vc0>;

>> +                        };

>> +                };

>> +        };


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/imx7-csi.txt b/Documentation/devicetree/bindings/media/imx7-csi.txt
new file mode 100644
index 000000000000..aab4f5d72390
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/imx7-csi.txt
@@ -0,0 +1,44 @@ 
+Freescale i.MX7 CMOS Sensor Interface
+=====================================
+
+csi node
+--------
+
+This is device node for the CMOS Sensor Interface (CSI) which enables the chip
+to connect directly to external CMOS image sensors.
+
+Required properties:
+
+- compatible    : "fsl,imx7-csi";
+- reg           : base address and length of the register set for the device;
+- interrupts    : should contain CSI interrupt;
+- clocks        : list of clock specifiers, see
+        Documentation/devicetree/bindings/clock/clock-bindings.txt for details;
+- clock-names   : must contain "axi", "mclk" and "dcic" entries, matching
+                 entries in the clock property;
+
+The device node should contain one 'port' child node with one child 'endpoint'
+node, according to the bindings defined in Documentation/devicetree/bindings/
+media/video-interfaces.txt. In the following example a remote endpoint is a
+video multiplexer.
+
+example:
+
+                csi: csi@30710000 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        compatible = "fsl,imx7-csi";
+                        reg = <0x30710000 0x10000>;
+                        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+                        clocks = <&clks IMX7D_CLK_DUMMY>,
+                                        <&clks IMX7D_CSI_MCLK_ROOT_CLK>,
+                                        <&clks IMX7D_CLK_DUMMY>;
+                        clock-names = "axi", "mclk", "dcic";
+
+                        port {
+                                csi_from_csi_mux: endpoint {
+                                        remote-endpoint = <&csi_mux_to_csi>;
+                                };
+                        };
+                };
diff --git a/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt b/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt
new file mode 100644
index 000000000000..7c5f20863724
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/imx7-mipi-csi2.txt
@@ -0,0 +1,82 @@ 
+Freescale i.MX7 Mipi CSI2
+=========================
+
+mipi_csi2 node
+--------------
+
+This is the device node for the MIPI CSI-2 receiver core in i.MX7 SoC. It is
+compatible with previous version of Samsung D-phy.
+
+Required properties:
+
+- compatible    : "fsl,imx7-mipi-csi2";
+- reg           : base address and length of the register set for the device;
+- interrupts    : should contain MIPI CSIS interrupt;
+- clocks        : list of clock specifiers, see
+        Documentation/devicetree/bindings/clock/clock-bindings.txt for details;
+- clock-names   : must contain "pclk", "wrap" and "phy" entries, matching
+                  entries in the clock property;
+- power-domains : a phandle to the power domain, see
+          Documentation/devicetree/bindings/power/power_domain.txt for details.
+- reset-names   : should include following entry "mrst";
+- resets        : a list of phandle, should contain reset entry of
+                  reset-names;
+- phy-supply    : from the generic phy bindings, a phandle to a regulator that
+	          provides power to MIPI CSIS core;
+
+Optional properties:
+
+- clock-frequency : The IP's main (system bus) clock frequency in Hz, default
+		    value when this property is not specified is 166 MHz;
+- fsl,csis-hs-settle : differential receiver (HS-RX) settle time;
+
+port node
+---------
+
+- reg		  : (required) can take the values 0 or 1, where 0 is the
+                     related sink port and port 1 should be the source one;
+
+endpoint node
+-------------
+
+- data-lanes    : (required) an array specifying active physical MIPI-CSI2
+		    data input lanes and their mapping to logical lanes; the
+		    array's content is unused, only its length is meaningful;
+
+example:
+
+        mipi_csi: mipi-csi@30750000 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                compatible = "fsl,imx7-mipi-csi2";
+                reg = <0x30750000 0x10000>;
+                interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+                                <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
+                                <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
+                clock-names = "pclk", "wrap", "phy";
+                clock-frequency = <166000000>;
+                power-domains = <&pgc_mipi_phy>;
+                phy-supply = <&reg_1p0d>;
+                resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
+                reset-names = "mrst";
+                fsl,csis-hs-settle = <3>;
+
+                port@0 {
+                        reg = <0>;
+
+                        mipi_from_sensor: endpoint {
+                                remote-endpoint = <&ov2680_to_mipi>;
+                                data-lanes = <1>;
+                        };
+                };
+
+                port@1 {
+                        reg = <1>;
+
+                        mipi_vc0_to_csi_mux: endpoint {
+                                remote-endpoint = <&csi_mux_from_mipi_vc0>;
+                        };
+                };
+        };