diff mbox series

[v4,2/5] drm/dp: fix link probing for devices supporting DP 1.4+

Message ID 1537455288-20223-3-git-send-email-dkos@cadence.com
State Superseded
Headers show
Series None | expand

Commit Message

Damian Kos Sept. 20, 2018, 2:54 p.m. UTC
From: Quentin Schulz <quentin.schulz@free-electrons.com>


DP 1.4 introduced a DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT bit in
DP_TRAINING_AUX_RD_INTERVAL register. If set, DPCD registers from
DP_DPCD_REV to DP_ADAPTER_CAP should be retrieved starting from
DP_DPCD_REV_EXTENDED. All registers are copied except DP_DPCD_REV,
DP_MAX_LINK_RATE and DP_DOWNSTREAMPORT_PRESENT which represent the
"true capabilities" of DPRX device.

Original DP_DPCD_REV, DP_MAX_LINK_RATE and DP_DOWNSTREAMPORT_PRESENT
might falsely return lower capabilities to "avoid interoperability
issues with some of the existing DP Source devices that malfunction
when they discover the higher capabilities within those three
registers.".

Before DP 1.4, DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT bit was reserved
and read 0 so it's safe to check against it even if DP revision is
<1.4

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>

Signed-off-by: Damian Kos <dkos@cadence.com>

---
 drivers/gpu/drm/drm_dp_helper.c | 30 +++++++++++++++++++++++++++++-
 1 file changed, 29 insertions(+), 1 deletion(-)

-- 
2.17.1

Comments

Navare, Manasi Sept. 21, 2018, 7:59 a.m. UTC | #1
Thanks for the patch. Verified with the DP 1.4 spec and looks good to me.
Also look at the related patch that makes use of the correct extended capabilities:

https://patchwork.freedesktop.org/patch/249400/

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>


Manasi


On Thu, Sep 20, 2018 at 03:54:37PM +0100, Damian Kos wrote:
> From: Quentin Schulz <quentin.schulz@free-electrons.com>

> 

> DP 1.4 introduced a DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT bit in

> DP_TRAINING_AUX_RD_INTERVAL register. If set, DPCD registers from

> DP_DPCD_REV to DP_ADAPTER_CAP should be retrieved starting from

> DP_DPCD_REV_EXTENDED. All registers are copied except DP_DPCD_REV,

> DP_MAX_LINK_RATE and DP_DOWNSTREAMPORT_PRESENT which represent the

> "true capabilities" of DPRX device.

> 

> Original DP_DPCD_REV, DP_MAX_LINK_RATE and DP_DOWNSTREAMPORT_PRESENT

> might falsely return lower capabilities to "avoid interoperability

> issues with some of the existing DP Source devices that malfunction

> when they discover the higher capabilities within those three

> registers.".

> 

> Before DP 1.4, DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT bit was reserved

> and read 0 so it's safe to check against it even if DP revision is

> <1.4

> 

> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>

> Signed-off-by: Damian Kos <dkos@cadence.com>

> ---

>  drivers/gpu/drm/drm_dp_helper.c | 30 +++++++++++++++++++++++++++++-

>  1 file changed, 29 insertions(+), 1 deletion(-)

> 

> diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c

> index 8c6b9fd89f8a..735ebde5c2f0 100644

> --- a/drivers/gpu/drm/drm_dp_helper.c

> +++ b/drivers/gpu/drm/drm_dp_helper.c

> @@ -370,10 +370,38 @@ int drm_dp_link_probe(struct drm_dp_aux *aux, struct drm_dp_link *link)

>  {

>  	u8 values[3];

>  	int err;

> +	unsigned int addr;

>  

>  	memset(link, 0, sizeof(*link));

>  

> -	err = drm_dp_dpcd_read(aux, DP_DPCD_REV, values, sizeof(values));

> +	/*

> +	 * DP 1.4 introduced a DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT bit in

> +	 * DP_TRAINING_AUX_RD_INTERVAL register. If set, DPCD registers from

> +	 * DP_DPCD_REV to DP_ADAPTER_CAP should be retrieved starting from

> +	 * DP_DPCD_REV_EXTENDED. All registers are copied except DP_DPCD_REV,

> +	 * DP_MAX_LINK_RATE and DP_DOWNSTREAMPORT_PRESENT which represent the

> +	 * "true capabilities" of DPRX device.

> +	 *

> +	 * Original DP_DPCD_REV, DP_MAX_LINK_RATE and DP_DOWNSTREAMPORT_PRESENT

> +	 * might falsely return lower capabilities to "avoid interoperability

> +	 * issues with some of the existing DP Source devices that malfunction

> +	 * when they discover the higher capabilities within those three

> +	 * registers.".

> +	 *

> +	 * Before DP 1.4, DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT bit was reserved

> +	 * and read 0 so it's safe to check against it even if DP revision is

> +	 * <1.4

> +	 */

> +	err = drm_dp_dpcd_readb(aux, DP_TRAINING_AUX_RD_INTERVAL, values);

> +	if (err < 0)

> +		return err;

> +

> +	if (values[0] & DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT)

> +		addr = DP_DP13_DPCD_REV;

> +	else

> +		addr = DP_DPCD_REV;

> +

> +	err = drm_dp_dpcd_read(aux, addr, values, sizeof(values));

>  	if (err < 0)

>  		return err;

>  

> -- 

> 2.17.1

> 

> _______________________________________________

> dri-devel mailing list

> dri-devel@lists.freedesktop.org

> https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quentin Schulz Oct. 1, 2018, 9:27 a.m. UTC | #2
Hi Manasi,

On Fri, Sep 21, 2018 at 12:59:30AM -0700, Manasi Navare wrote:
> Thanks for the patch. Verified with the DP 1.4 spec and looks good to me.

> Also look at the related patch that makes use of the correct extended capabilities:

> 

> https://patchwork.freedesktop.org/patch/249400/

> 


If I'm not mistaken, you could get rid of the patch in the Intel driver
when we have this one merged. Is there any reason not to, have I missed
something?

Thanks,
Quentin

> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

> 

> Manasi

> 

> 

> On Thu, Sep 20, 2018 at 03:54:37PM +0100, Damian Kos wrote:

> > From: Quentin Schulz <quentin.schulz@free-electrons.com>

> > 

> > DP 1.4 introduced a DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT bit in

> > DP_TRAINING_AUX_RD_INTERVAL register. If set, DPCD registers from

> > DP_DPCD_REV to DP_ADAPTER_CAP should be retrieved starting from

> > DP_DPCD_REV_EXTENDED. All registers are copied except DP_DPCD_REV,

> > DP_MAX_LINK_RATE and DP_DOWNSTREAMPORT_PRESENT which represent the

> > "true capabilities" of DPRX device.

> > 

> > Original DP_DPCD_REV, DP_MAX_LINK_RATE and DP_DOWNSTREAMPORT_PRESENT

> > might falsely return lower capabilities to "avoid interoperability

> > issues with some of the existing DP Source devices that malfunction

> > when they discover the higher capabilities within those three

> > registers.".

> > 

> > Before DP 1.4, DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT bit was reserved

> > and read 0 so it's safe to check against it even if DP revision is

> > <1.4

> > 

> > Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>

> > Signed-off-by: Damian Kos <dkos@cadence.com>

> > ---

> >  drivers/gpu/drm/drm_dp_helper.c | 30 +++++++++++++++++++++++++++++-

> >  1 file changed, 29 insertions(+), 1 deletion(-)

> > 

> > diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c

> > index 8c6b9fd89f8a..735ebde5c2f0 100644

> > --- a/drivers/gpu/drm/drm_dp_helper.c

> > +++ b/drivers/gpu/drm/drm_dp_helper.c

> > @@ -370,10 +370,38 @@ int drm_dp_link_probe(struct drm_dp_aux *aux, struct drm_dp_link *link)

> >  {

> >  	u8 values[3];

> >  	int err;

> > +	unsigned int addr;

> >  

> >  	memset(link, 0, sizeof(*link));

> >  

> > -	err = drm_dp_dpcd_read(aux, DP_DPCD_REV, values, sizeof(values));

> > +	/*

> > +	 * DP 1.4 introduced a DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT bit in

> > +	 * DP_TRAINING_AUX_RD_INTERVAL register. If set, DPCD registers from

> > +	 * DP_DPCD_REV to DP_ADAPTER_CAP should be retrieved starting from

> > +	 * DP_DPCD_REV_EXTENDED. All registers are copied except DP_DPCD_REV,

> > +	 * DP_MAX_LINK_RATE and DP_DOWNSTREAMPORT_PRESENT which represent the

> > +	 * "true capabilities" of DPRX device.

> > +	 *

> > +	 * Original DP_DPCD_REV, DP_MAX_LINK_RATE and DP_DOWNSTREAMPORT_PRESENT

> > +	 * might falsely return lower capabilities to "avoid interoperability

> > +	 * issues with some of the existing DP Source devices that malfunction

> > +	 * when they discover the higher capabilities within those three

> > +	 * registers.".

> > +	 *

> > +	 * Before DP 1.4, DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT bit was reserved

> > +	 * and read 0 so it's safe to check against it even if DP revision is

> > +	 * <1.4

> > +	 */

> > +	err = drm_dp_dpcd_readb(aux, DP_TRAINING_AUX_RD_INTERVAL, values);

> > +	if (err < 0)

> > +		return err;

> > +

> > +	if (values[0] & DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT)

> > +		addr = DP_DP13_DPCD_REV;

> > +	else

> > +		addr = DP_DPCD_REV;

> > +

> > +	err = drm_dp_dpcd_read(aux, addr, values, sizeof(values));

> >  	if (err < 0)

> >  		return err;

> >  

> > -- 

> > 2.17.1

> > 

> > _______________________________________________

> > dri-devel mailing list

> > dri-devel@lists.freedesktop.org

> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
diff mbox series

Patch

diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
index 8c6b9fd89f8a..735ebde5c2f0 100644
--- a/drivers/gpu/drm/drm_dp_helper.c
+++ b/drivers/gpu/drm/drm_dp_helper.c
@@ -370,10 +370,38 @@  int drm_dp_link_probe(struct drm_dp_aux *aux, struct drm_dp_link *link)
 {
 	u8 values[3];
 	int err;
+	unsigned int addr;
 
 	memset(link, 0, sizeof(*link));
 
-	err = drm_dp_dpcd_read(aux, DP_DPCD_REV, values, sizeof(values));
+	/*
+	 * DP 1.4 introduced a DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT bit in
+	 * DP_TRAINING_AUX_RD_INTERVAL register. If set, DPCD registers from
+	 * DP_DPCD_REV to DP_ADAPTER_CAP should be retrieved starting from
+	 * DP_DPCD_REV_EXTENDED. All registers are copied except DP_DPCD_REV,
+	 * DP_MAX_LINK_RATE and DP_DOWNSTREAMPORT_PRESENT which represent the
+	 * "true capabilities" of DPRX device.
+	 *
+	 * Original DP_DPCD_REV, DP_MAX_LINK_RATE and DP_DOWNSTREAMPORT_PRESENT
+	 * might falsely return lower capabilities to "avoid interoperability
+	 * issues with some of the existing DP Source devices that malfunction
+	 * when they discover the higher capabilities within those three
+	 * registers.".
+	 *
+	 * Before DP 1.4, DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT bit was reserved
+	 * and read 0 so it's safe to check against it even if DP revision is
+	 * <1.4
+	 */
+	err = drm_dp_dpcd_readb(aux, DP_TRAINING_AUX_RD_INTERVAL, values);
+	if (err < 0)
+		return err;
+
+	if (values[0] & DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT)
+		addr = DP_DP13_DPCD_REV;
+	else
+		addr = DP_DPCD_REV;
+
+	err = drm_dp_dpcd_read(aux, addr, values, sizeof(values));
 	if (err < 0)
 		return err;