| Message ID | 20190802151510.17074-4-ard.biesheuvel@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | crypto: aegis128 followup | expand |
On Fri, Aug 2, 2019 at 8:15 AM Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote: > > Provide a version of the core AES transform to the aegis128 SIMD > code that does not rely on the special AES instructions, but uses > plain NEON instructions instead. This allows the SIMD version of > the aegis128 driver to be used on arm64 systems that do not > implement those instructions (which are not mandatory in the > architecture), such as the Raspberry Pi 3. > > Cc: Nick Desaulniers <ndesaulniers@google.com> Thanks for the heads up, thoughts below: > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> > --- > crypto/Makefile | 5 ++ > crypto/aegis128-neon-inner.c | 53 ++++++++++++++++++++ > crypto/aegis128-neon.c | 16 +++++- > 3 files changed, 73 insertions(+), 1 deletion(-) > > diff --git a/crypto/Makefile b/crypto/Makefile > index 99a9fa9087d1..c3760c7616ac 100644 > --- a/crypto/Makefile > +++ b/crypto/Makefile > @@ -99,6 +99,11 @@ aegis128-$(CONFIG_CRYPTO_AEGIS128_SIMD) += aegis128-neon.o aegis128-neon-inner.o > endif > ifeq ($(ARCH),arm64) > CFLAGS_aegis128-neon-inner.o += -ffreestanding -mcpu=generic+crypto > +CFLAGS_aegis128-neon-inner.o += -ffixed-q14 -ffixed-q15 > +CFLAGS_aegis128-neon-inner.o += -ffixed-q16 -ffixed-q17 -ffixed-q18 -ffixed-q19 > +CFLAGS_aegis128-neon-inner.o += -ffixed-q20 -ffixed-q21 -ffixed-q22 -ffixed-q23 > +CFLAGS_aegis128-neon-inner.o += -ffixed-q24 -ffixed-q25 -ffixed-q26 -ffixed-q27 > +CFLAGS_aegis128-neon-inner.o += -ffixed-q28 -ffixed-q29 -ffixed-q30 -ffixed-q31 So Tri implemented support for -ffixed-x*, but Clang currently lacks support for -ffixed-q*. Petr recently made this slightly more generic: https://reviews.llvm.org/D56305 but Clang still doesn't allow specifying any register number + width for each supported arch. The arm64 support for x registers was manually added. I'm guessing that for arm64 that if: * w* is 32b registers * x* is 64b registers then: * q* is 128b NEON registers? I'm curious as to why we need to reserve these registers when calling functions in this TU? I assume this has to do with the calling convention for uint8x16_t? Can you point me to documentation about that (that way I can reference in any patch to Clang/LLVM)? > CFLAGS_REMOVE_aegis128-neon-inner.o += -mgeneral-regs-only > aegis128-$(CONFIG_CRYPTO_AEGIS128_SIMD) += aegis128-neon.o aegis128-neon-inner.o > endif > diff --git a/crypto/aegis128-neon-inner.c b/crypto/aegis128-neon-inner.c > index 6aca2f425b6d..7aa4cef3c2de 100644 > --- a/crypto/aegis128-neon-inner.c > +++ b/crypto/aegis128-neon-inner.c > @@ -17,6 +17,8 @@ > > #include <stddef.h> > > +extern int aegis128_have_aes_insn; > + > void *memcpy(void *dest, const void *src, size_t n); > void *memset(void *s, int c, size_t n); > > @@ -49,6 +51,32 @@ uint8x16_t aegis_aes_round(uint8x16_t w) > { > uint8x16_t z = {}; > > +#ifdef CONFIG_ARM64 > + if (!__builtin_expect(aegis128_have_aes_insn, 1)) { Can we use a likely/unlikely here? It always takes me a minute to decode these. > + uint8x16_t v; > + > + // shift rows > + asm("tbl %0.16b, {%0.16b}, v14.16b" : "+w"(w)); > + > + // sub bytes > + asm("tbl %0.16b, {v16.16b-v19.16b}, %1.16b" : "=w"(v) : "w"(w)); > + w -= 0x40; > + asm("tbx %0.16b, {v20.16b-v23.16b}, %1.16b" : "+w"(v) : "w"(w)); > + w -= 0x40; > + asm("tbx %0.16b, {v24.16b-v27.16b}, %1.16b" : "+w"(v) : "w"(w)); > + w -= 0x40; > + asm("tbx %0.16b, {v28.16b-v31.16b}, %1.16b" : "+w"(v) : "w"(w)); > + > + // mix columns > + w = (v << 1) ^ (uint8x16_t)(((int8x16_t)v >> 7) & 0x1b); What does it mean to right shift a int8x16_t? Is that elementwise right shift or do the bits shift from one element to another? > + w ^= (uint8x16_t)vrev32q_u16((uint16x8_t)v); > + asm("tbl %0.16b, {%1.16b}, v15.16b" : "=w"(v) : "w"(v ^ w)); > + w ^= v; > + > + return w; > + } > +#endif > + > /* > * We use inline asm here instead of the vaeseq_u8/vaesmcq_u8 intrinsics > * to force the compiler to issue the aese/aesmc instructions in pairs. > @@ -149,3 +177,28 @@ void crypto_aegis128_decrypt_chunk_neon(void *state, void *dst, const void *src, > > aegis128_save_state_neon(st, state); > } > + > +#ifdef CONFIG_ARM64 > +void crypto_aegis128_init_neon(void) > +{ > + u64 tmp; > + > + asm volatile( > + "adrp %0, crypto_aes_sbox \n\t" > + "add %0, %0, :lo12:crypto_aes_sbox \n\t" > + "mov v14.16b, %1.16b \n\t" > + "mov v15.16b, %2.16b \n\t" > + "ld1 {v16.16b-v19.16b}, [%0], #64 \n\t" > + "ld1 {v20.16b-v23.16b}, [%0], #64 \n\t" > + "ld1 {v24.16b-v27.16b}, [%0], #64 \n\t" > + "ld1 {v28.16b-v31.16b}, [%0] \n\t" > + : "=&r"(tmp) > + : "w"((uint8x16_t){ // shift rows permutation vector > + 0x0, 0x5, 0xa, 0xf, 0x4, 0x9, 0xe, 0x3, > + 0x8, 0xd, 0x2, 0x7, 0xc, 0x1, 0x6, 0xb, }), > + "w"((uint8x16_t){ // ror32 permutation vector > + 0x1, 0x2, 0x3, 0x0, 0x5, 0x6, 0x7, 0x4, > + 0x9, 0xa, 0xb, 0x8, 0xd, 0xe, 0xf, 0xc, }) > + ); > +} > +#endif > diff --git a/crypto/aegis128-neon.c b/crypto/aegis128-neon.c > index c1c0a1686f67..72f9d48e4963 100644 > --- a/crypto/aegis128-neon.c > +++ b/crypto/aegis128-neon.c > @@ -14,14 +14,24 @@ void crypto_aegis128_encrypt_chunk_neon(void *state, void *dst, const void *src, > void crypto_aegis128_decrypt_chunk_neon(void *state, void *dst, const void *src, > unsigned int size); > > +void crypto_aegis128_init_neon(void); > + > +int aegis128_have_aes_insn __ro_after_init; > + > bool crypto_aegis128_have_simd(void) > { > - return cpu_have_feature(cpu_feature(AES)); > + if (cpu_have_feature(cpu_feature(AES))) { > + aegis128_have_aes_insn = 1; > + return true; This could just fall through right? (if you removed the return statement, I assume IS_ENABLED doesn't have runtime overhead but is just a preprocessor check?) > + } > + return IS_ENABLED(CONFIG_ARM64); > } > > void crypto_aegis128_update_simd(union aegis_block *state, const void *msg) > { > kernel_neon_begin(); > + if (IS_ENABLED(CONFIG_ARM64) && !aegis128_have_aes_insn) > + crypto_aegis128_init_neon(); > crypto_aegis128_update_neon(state, msg); > kernel_neon_end(); > } > @@ -30,6 +40,8 @@ void crypto_aegis128_encrypt_chunk_simd(union aegis_block *state, u8 *dst, > const u8 *src, unsigned int size) > { > kernel_neon_begin(); > + if (IS_ENABLED(CONFIG_ARM64) && !aegis128_have_aes_insn) > + crypto_aegis128_init_neon(); > crypto_aegis128_encrypt_chunk_neon(state, dst, src, size); > kernel_neon_end(); > } > @@ -38,6 +50,8 @@ void crypto_aegis128_decrypt_chunk_simd(union aegis_block *state, u8 *dst, > const u8 *src, unsigned int size) > { > kernel_neon_begin(); > + if (IS_ENABLED(CONFIG_ARM64) && !aegis128_have_aes_insn) > + crypto_aegis128_init_neon(); > crypto_aegis128_decrypt_chunk_neon(state, dst, src, size); > kernel_neon_end(); > } > -- > 2.17.1 > -- Thanks, ~Nick Desaulniers
On Fri, 9 Aug 2019 at 01:31, Nick Desaulniers <ndesaulniers@google.com> wrote: > > On Fri, Aug 2, 2019 at 8:15 AM Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote: > > > > Provide a version of the core AES transform to the aegis128 SIMD > > code that does not rely on the special AES instructions, but uses > > plain NEON instructions instead. This allows the SIMD version of > > the aegis128 driver to be used on arm64 systems that do not > > implement those instructions (which are not mandatory in the > > architecture), such as the Raspberry Pi 3. > > > > Cc: Nick Desaulniers <ndesaulniers@google.com> > > Thanks for the heads up, thoughts below: > > > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> > > --- > > crypto/Makefile | 5 ++ > > crypto/aegis128-neon-inner.c | 53 ++++++++++++++++++++ > > crypto/aegis128-neon.c | 16 +++++- > > 3 files changed, 73 insertions(+), 1 deletion(-) > > > > diff --git a/crypto/Makefile b/crypto/Makefile > > index 99a9fa9087d1..c3760c7616ac 100644 > > --- a/crypto/Makefile > > +++ b/crypto/Makefile > > @@ -99,6 +99,11 @@ aegis128-$(CONFIG_CRYPTO_AEGIS128_SIMD) += aegis128-neon.o aegis128-neon-inner.o > > endif > > ifeq ($(ARCH),arm64) > > CFLAGS_aegis128-neon-inner.o += -ffreestanding -mcpu=generic+crypto > > +CFLAGS_aegis128-neon-inner.o += -ffixed-q14 -ffixed-q15 > > +CFLAGS_aegis128-neon-inner.o += -ffixed-q16 -ffixed-q17 -ffixed-q18 -ffixed-q19 > > +CFLAGS_aegis128-neon-inner.o += -ffixed-q20 -ffixed-q21 -ffixed-q22 -ffixed-q23 > > +CFLAGS_aegis128-neon-inner.o += -ffixed-q24 -ffixed-q25 -ffixed-q26 -ffixed-q27 > > +CFLAGS_aegis128-neon-inner.o += -ffixed-q28 -ffixed-q29 -ffixed-q30 -ffixed-q31 > > So Tri implemented support for -ffixed-x*, but Clang currently lacks > support for -ffixed-q*. Petr recently made this slightly more > generic: > https://reviews.llvm.org/D56305 > but Clang still doesn't allow specifying any register number + width > for each supported arch. The arm64 support for x registers was > manually added. > > I'm guessing that for arm64 that if: > * w* is 32b registers > * x* is 64b registers > then: > * q* is 128b NEON registers? > > I'm curious as to why we need to reserve these registers when calling > functions in this TU? I assume this has to do with the calling > convention for uint8x16_t? Can you point me to documentation about > that (that way I can reference in any patch to Clang/LLVM)? > This is to allow the AES sbox to remain loaded in registers. Otherwise, the compiler will reload all 256 bytes into 16 NEON registers for every AES block processed, which is suboptimal. > > CFLAGS_REMOVE_aegis128-neon-inner.o += -mgeneral-regs-only > > aegis128-$(CONFIG_CRYPTO_AEGIS128_SIMD) += aegis128-neon.o aegis128-neon-inner.o > > endif > > diff --git a/crypto/aegis128-neon-inner.c b/crypto/aegis128-neon-inner.c > > index 6aca2f425b6d..7aa4cef3c2de 100644 > > --- a/crypto/aegis128-neon-inner.c > > +++ b/crypto/aegis128-neon-inner.c > > @@ -17,6 +17,8 @@ > > > > #include <stddef.h> > > > > +extern int aegis128_have_aes_insn; > > + > > void *memcpy(void *dest, const void *src, size_t n); > > void *memset(void *s, int c, size_t n); > > > > @@ -49,6 +51,32 @@ uint8x16_t aegis_aes_round(uint8x16_t w) > > { > > uint8x16_t z = {}; > > > > +#ifdef CONFIG_ARM64 > > + if (!__builtin_expect(aegis128_have_aes_insn, 1)) { > > Can we use a likely/unlikely here? It always takes me a minute to decode these. > I am avoiding ordinary kernel headers in this TU, so not really. > > + uint8x16_t v; > > + > > + // shift rows > > + asm("tbl %0.16b, {%0.16b}, v14.16b" : "+w"(w)); > > + > > + // sub bytes > > + asm("tbl %0.16b, {v16.16b-v19.16b}, %1.16b" : "=w"(v) : "w"(w)); > > + w -= 0x40; > > + asm("tbx %0.16b, {v20.16b-v23.16b}, %1.16b" : "+w"(v) : "w"(w)); > > + w -= 0x40; > > + asm("tbx %0.16b, {v24.16b-v27.16b}, %1.16b" : "+w"(v) : "w"(w)); > > + w -= 0x40; > > + asm("tbx %0.16b, {v28.16b-v31.16b}, %1.16b" : "+w"(v) : "w"(w)); > > + > > + // mix columns > > + w = (v << 1) ^ (uint8x16_t)(((int8x16_t)v >> 7) & 0x1b); > > What does it mean to right shift a int8x16_t? Is that elementwise > right shift or do the bits shift from one element to another? > Element wise. This applies to all uint8x16_t arithmetic, which is kind of the point. > > + w ^= (uint8x16_t)vrev32q_u16((uint16x8_t)v); > > + asm("tbl %0.16b, {%1.16b}, v15.16b" : "=w"(v) : "w"(v ^ w)); > > + w ^= v; > > + > > + return w; > > + } > > +#endif > > + > > /* > > * We use inline asm here instead of the vaeseq_u8/vaesmcq_u8 intrinsics > > * to force the compiler to issue the aese/aesmc instructions in pairs. > > @@ -149,3 +177,28 @@ void crypto_aegis128_decrypt_chunk_neon(void *state, void *dst, const void *src, > > > > aegis128_save_state_neon(st, state); > > } > > + > > +#ifdef CONFIG_ARM64 > > +void crypto_aegis128_init_neon(void) > > +{ > > + u64 tmp; > > + > > + asm volatile( > > + "adrp %0, crypto_aes_sbox \n\t" > > + "add %0, %0, :lo12:crypto_aes_sbox \n\t" > > + "mov v14.16b, %1.16b \n\t" > > + "mov v15.16b, %2.16b \n\t" > > + "ld1 {v16.16b-v19.16b}, [%0], #64 \n\t" > > + "ld1 {v20.16b-v23.16b}, [%0], #64 \n\t" > > + "ld1 {v24.16b-v27.16b}, [%0], #64 \n\t" > > + "ld1 {v28.16b-v31.16b}, [%0] \n\t" > > + : "=&r"(tmp) > > + : "w"((uint8x16_t){ // shift rows permutation vector > > + 0x0, 0x5, 0xa, 0xf, 0x4, 0x9, 0xe, 0x3, > > + 0x8, 0xd, 0x2, 0x7, 0xc, 0x1, 0x6, 0xb, }), > > + "w"((uint8x16_t){ // ror32 permutation vector > > + 0x1, 0x2, 0x3, 0x0, 0x5, 0x6, 0x7, 0x4, > > + 0x9, 0xa, 0xb, 0x8, 0xd, 0xe, 0xf, 0xc, }) > > + ); > > +} > > +#endif > > diff --git a/crypto/aegis128-neon.c b/crypto/aegis128-neon.c > > index c1c0a1686f67..72f9d48e4963 100644 > > --- a/crypto/aegis128-neon.c > > +++ b/crypto/aegis128-neon.c > > @@ -14,14 +14,24 @@ void crypto_aegis128_encrypt_chunk_neon(void *state, void *dst, const void *src, > > void crypto_aegis128_decrypt_chunk_neon(void *state, void *dst, const void *src, > > unsigned int size); > > > > +void crypto_aegis128_init_neon(void); > > + > > +int aegis128_have_aes_insn __ro_after_init; > > + > > bool crypto_aegis128_have_simd(void) > > { > > - return cpu_have_feature(cpu_feature(AES)); > > + if (cpu_have_feature(cpu_feature(AES))) { > > + aegis128_have_aes_insn = 1; > > + return true; > > This could just fall through right? (if you removed the return > statement, I assume IS_ENABLED doesn't have runtime overhead but is > just a preprocessor check?) > No. This code can be built for 32-bit ARM as well, in which case we can only use the AES instructions. > > + } > > + return IS_ENABLED(CONFIG_ARM64); > > } > > > > void crypto_aegis128_update_simd(union aegis_block *state, const void *msg) > > { > > kernel_neon_begin(); > > + if (IS_ENABLED(CONFIG_ARM64) && !aegis128_have_aes_insn) > > + crypto_aegis128_init_neon(); > > crypto_aegis128_update_neon(state, msg); > > kernel_neon_end(); > > } > > @@ -30,6 +40,8 @@ void crypto_aegis128_encrypt_chunk_simd(union aegis_block *state, u8 *dst, > > const u8 *src, unsigned int size) > > { > > kernel_neon_begin(); > > + if (IS_ENABLED(CONFIG_ARM64) && !aegis128_have_aes_insn) > > + crypto_aegis128_init_neon(); > > crypto_aegis128_encrypt_chunk_neon(state, dst, src, size); > > kernel_neon_end(); > > } > > @@ -38,6 +50,8 @@ void crypto_aegis128_decrypt_chunk_simd(union aegis_block *state, u8 *dst, > > const u8 *src, unsigned int size) > > { > > kernel_neon_begin(); > > + if (IS_ENABLED(CONFIG_ARM64) && !aegis128_have_aes_insn) > > + crypto_aegis128_init_neon(); > > crypto_aegis128_decrypt_chunk_neon(state, dst, src, size); > > kernel_neon_end(); > > } > > -- > > 2.17.1 > > > > > -- > Thanks, > ~Nick Desaulniers
diff --git a/crypto/Makefile b/crypto/Makefile index 99a9fa9087d1..c3760c7616ac 100644 --- a/crypto/Makefile +++ b/crypto/Makefile @@ -99,6 +99,11 @@ aegis128-$(CONFIG_CRYPTO_AEGIS128_SIMD) += aegis128-neon.o aegis128-neon-inner.o endif ifeq ($(ARCH),arm64) CFLAGS_aegis128-neon-inner.o += -ffreestanding -mcpu=generic+crypto +CFLAGS_aegis128-neon-inner.o += -ffixed-q14 -ffixed-q15 +CFLAGS_aegis128-neon-inner.o += -ffixed-q16 -ffixed-q17 -ffixed-q18 -ffixed-q19 +CFLAGS_aegis128-neon-inner.o += -ffixed-q20 -ffixed-q21 -ffixed-q22 -ffixed-q23 +CFLAGS_aegis128-neon-inner.o += -ffixed-q24 -ffixed-q25 -ffixed-q26 -ffixed-q27 +CFLAGS_aegis128-neon-inner.o += -ffixed-q28 -ffixed-q29 -ffixed-q30 -ffixed-q31 CFLAGS_REMOVE_aegis128-neon-inner.o += -mgeneral-regs-only aegis128-$(CONFIG_CRYPTO_AEGIS128_SIMD) += aegis128-neon.o aegis128-neon-inner.o endif diff --git a/crypto/aegis128-neon-inner.c b/crypto/aegis128-neon-inner.c index 6aca2f425b6d..7aa4cef3c2de 100644 --- a/crypto/aegis128-neon-inner.c +++ b/crypto/aegis128-neon-inner.c @@ -17,6 +17,8 @@ #include <stddef.h> +extern int aegis128_have_aes_insn; + void *memcpy(void *dest, const void *src, size_t n); void *memset(void *s, int c, size_t n); @@ -49,6 +51,32 @@ uint8x16_t aegis_aes_round(uint8x16_t w) { uint8x16_t z = {}; +#ifdef CONFIG_ARM64 + if (!__builtin_expect(aegis128_have_aes_insn, 1)) { + uint8x16_t v; + + // shift rows + asm("tbl %0.16b, {%0.16b}, v14.16b" : "+w"(w)); + + // sub bytes + asm("tbl %0.16b, {v16.16b-v19.16b}, %1.16b" : "=w"(v) : "w"(w)); + w -= 0x40; + asm("tbx %0.16b, {v20.16b-v23.16b}, %1.16b" : "+w"(v) : "w"(w)); + w -= 0x40; + asm("tbx %0.16b, {v24.16b-v27.16b}, %1.16b" : "+w"(v) : "w"(w)); + w -= 0x40; + asm("tbx %0.16b, {v28.16b-v31.16b}, %1.16b" : "+w"(v) : "w"(w)); + + // mix columns + w = (v << 1) ^ (uint8x16_t)(((int8x16_t)v >> 7) & 0x1b); + w ^= (uint8x16_t)vrev32q_u16((uint16x8_t)v); + asm("tbl %0.16b, {%1.16b}, v15.16b" : "=w"(v) : "w"(v ^ w)); + w ^= v; + + return w; + } +#endif + /* * We use inline asm here instead of the vaeseq_u8/vaesmcq_u8 intrinsics * to force the compiler to issue the aese/aesmc instructions in pairs. @@ -149,3 +177,28 @@ void crypto_aegis128_decrypt_chunk_neon(void *state, void *dst, const void *src, aegis128_save_state_neon(st, state); } + +#ifdef CONFIG_ARM64 +void crypto_aegis128_init_neon(void) +{ + u64 tmp; + + asm volatile( + "adrp %0, crypto_aes_sbox \n\t" + "add %0, %0, :lo12:crypto_aes_sbox \n\t" + "mov v14.16b, %1.16b \n\t" + "mov v15.16b, %2.16b \n\t" + "ld1 {v16.16b-v19.16b}, [%0], #64 \n\t" + "ld1 {v20.16b-v23.16b}, [%0], #64 \n\t" + "ld1 {v24.16b-v27.16b}, [%0], #64 \n\t" + "ld1 {v28.16b-v31.16b}, [%0] \n\t" + : "=&r"(tmp) + : "w"((uint8x16_t){ // shift rows permutation vector + 0x0, 0x5, 0xa, 0xf, 0x4, 0x9, 0xe, 0x3, + 0x8, 0xd, 0x2, 0x7, 0xc, 0x1, 0x6, 0xb, }), + "w"((uint8x16_t){ // ror32 permutation vector + 0x1, 0x2, 0x3, 0x0, 0x5, 0x6, 0x7, 0x4, + 0x9, 0xa, 0xb, 0x8, 0xd, 0xe, 0xf, 0xc, }) + ); +} +#endif diff --git a/crypto/aegis128-neon.c b/crypto/aegis128-neon.c index c1c0a1686f67..72f9d48e4963 100644 --- a/crypto/aegis128-neon.c +++ b/crypto/aegis128-neon.c @@ -14,14 +14,24 @@ void crypto_aegis128_encrypt_chunk_neon(void *state, void *dst, const void *src, void crypto_aegis128_decrypt_chunk_neon(void *state, void *dst, const void *src, unsigned int size); +void crypto_aegis128_init_neon(void); + +int aegis128_have_aes_insn __ro_after_init; + bool crypto_aegis128_have_simd(void) { - return cpu_have_feature(cpu_feature(AES)); + if (cpu_have_feature(cpu_feature(AES))) { + aegis128_have_aes_insn = 1; + return true; + } + return IS_ENABLED(CONFIG_ARM64); } void crypto_aegis128_update_simd(union aegis_block *state, const void *msg) { kernel_neon_begin(); + if (IS_ENABLED(CONFIG_ARM64) && !aegis128_have_aes_insn) + crypto_aegis128_init_neon(); crypto_aegis128_update_neon(state, msg); kernel_neon_end(); } @@ -30,6 +40,8 @@ void crypto_aegis128_encrypt_chunk_simd(union aegis_block *state, u8 *dst, const u8 *src, unsigned int size) { kernel_neon_begin(); + if (IS_ENABLED(CONFIG_ARM64) && !aegis128_have_aes_insn) + crypto_aegis128_init_neon(); crypto_aegis128_encrypt_chunk_neon(state, dst, src, size); kernel_neon_end(); } @@ -38,6 +50,8 @@ void crypto_aegis128_decrypt_chunk_simd(union aegis_block *state, u8 *dst, const u8 *src, unsigned int size) { kernel_neon_begin(); + if (IS_ENABLED(CONFIG_ARM64) && !aegis128_have_aes_insn) + crypto_aegis128_init_neon(); crypto_aegis128_decrypt_chunk_neon(state, dst, src, size); kernel_neon_end(); }
Provide a version of the core AES transform to the aegis128 SIMD code that does not rely on the special AES instructions, but uses plain NEON instructions instead. This allows the SIMD version of the aegis128 driver to be used on arm64 systems that do not implement those instructions (which are not mandatory in the architecture), such as the Raspberry Pi 3. Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> --- crypto/Makefile | 5 ++ crypto/aegis128-neon-inner.c | 53 ++++++++++++++++++++ crypto/aegis128-neon.c | 16 +++++- 3 files changed, 73 insertions(+), 1 deletion(-) -- 2.17.1