diff mbox series

[v3] seqlock: mark raw_read_seqcount and read_seqcount_retry as __always_inline

Message ID 20190726111804.18290-1-anders.roxell@linaro.org
State New
Headers show
Series [v3] seqlock: mark raw_read_seqcount and read_seqcount_retry as __always_inline | expand

Commit Message

Anders Roxell July 26, 2019, 11:18 a.m. UTC 
With the function graph tracer, each traced function calls sched_clock()
to take a timestamp. As sched_clock() uses
raw_read_seqcount()/read_seqcount_retry(), we must ensure that these
do not in turn trigger the graph tracer.
Both functions is marked as inline. However, if CONFIG_OPTIMIZE_INLINING
is set that may make the two functions tracable which they shouldn't.

Rework so that functions in seqlock.h are marked with __always_inline
since it can happen that other clocks can be utilized by the tracer, so
they will be inlined even if CONFIG_OPTIMIZE_INLINING is turned on.

Acked-by: Will Deacon <will.deacon@arm.com>

Signed-off-by: Anders Roxell <anders.roxell@linaro.org>

---
 include/linux/seqlock.h | 86 +++++++++++++++++++++--------------------
 1 file changed, 45 insertions(+), 41 deletions(-)

-- 
2.20.1

Comments

Thomas Gleixner Aug. 16, 2019, 10:16 a.m. UTC | #1 
On Fri, 26 Jul 2019, Anders Roxell wrote:
>  

> -static inline void __seqcount_init(seqcount_t *s, const char *name,

> +static __always_inline void __seqcount_init(seqcount_t *s, const char *name,

>  					  struct lock_class_key *key)


That has nothing to do with the actual problem

> -static inline void raw_write_seqcount_begin(seqcount_t *s)

> +static __always_inline void raw_write_seqcount_begin(seqcount_t *s)


Neither this, nor these:

> -static inline void raw_write_seqcount_end(seqcount_t *s)

> +static __always_inline void raw_write_seqcount_end(seqcount_t *s)

>  {


> -static inline void raw_write_seqcount_barrier(seqcount_t *s)

> +static __always_inline void raw_write_seqcount_barrier(seqcount_t *s)


The following is fine as it is used in the NMI safe time accessors which
can be used as trace clock:

> -static inline int raw_read_seqcount_latch(seqcount_t *s)

> +static __always_inline int raw_read_seqcount_latch(seqcount_t *s)


The rest is bogus...

s/inline/__always_inline/g is conveniant, but does neither match the
changelog nor does it make sense.

Thanks,

	tglx
diff mbox series

Patch

diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h
index bcf4cf26b8c8..fd202fd3db14 100644
--- a/include/linux/seqlock.h
+++ b/include/linux/seqlock.h
@@ -52,7 +52,7 @@  typedef struct seqcount {
 #endif
 } seqcount_t;
 
-static inline void __seqcount_init(seqcount_t *s, const char *name,
+static __always_inline void __seqcount_init(seqcount_t *s, const char *name,
 					  struct lock_class_key *key)
 {
 	/*
@@ -72,7 +72,7 @@  static inline void __seqcount_init(seqcount_t *s, const char *name,
 		__seqcount_init((s), #s, &__key);	\
 	} while (0)
 
-static inline void seqcount_lockdep_reader_access(const seqcount_t *s)
+static __always_inline void seqcount_lockdep_reader_access(const seqcount_t *s)
 {
 	seqcount_t *l = (seqcount_t *)s;
 	unsigned long flags;
@@ -105,7 +105,7 @@  static inline void seqcount_lockdep_reader_access(const seqcount_t *s)
  * Use carefully, only in critical code, and comment how the barrier is
  * provided.
  */
-static inline unsigned __read_seqcount_begin(const seqcount_t *s)
+static __always_inline unsigned __read_seqcount_begin(const seqcount_t *s)
 {
 	unsigned ret;
 
@@ -127,7 +127,7 @@  static inline unsigned __read_seqcount_begin(const seqcount_t *s)
  * seqcount without any lockdep checking and without checking or
  * masking the LSB. Calling code is responsible for handling that.
  */
-static inline unsigned raw_read_seqcount(const seqcount_t *s)
+static __always_inline unsigned raw_read_seqcount(const seqcount_t *s)
 {
 	unsigned ret = READ_ONCE(s->sequence);
 	smp_rmb();
@@ -143,7 +143,7 @@  static inline unsigned raw_read_seqcount(const seqcount_t *s)
  * seqcount, but without any lockdep checking. Validity of the critical
  * section is tested by checking read_seqcount_retry function.
  */
-static inline unsigned raw_read_seqcount_begin(const seqcount_t *s)
+static __always_inline unsigned raw_read_seqcount_begin(const seqcount_t *s)
 {
 	unsigned ret = __read_seqcount_begin(s);
 	smp_rmb();
@@ -159,7 +159,7 @@  static inline unsigned raw_read_seqcount_begin(const seqcount_t *s)
  * Validity of the critical section is tested by checking read_seqcount_retry
  * function.
  */
-static inline unsigned read_seqcount_begin(const seqcount_t *s)
+static __always_inline unsigned read_seqcount_begin(const seqcount_t *s)
 {
 	seqcount_lockdep_reader_access(s);
 	return raw_read_seqcount_begin(s);
@@ -179,7 +179,7 @@  static inline unsigned read_seqcount_begin(const seqcount_t *s)
  * read_seqcount_retry() instead of stabilizing at the beginning of the
  * critical section.
  */
-static inline unsigned raw_seqcount_begin(const seqcount_t *s)
+static __always_inline unsigned raw_seqcount_begin(const seqcount_t *s)
 {
 	unsigned ret = READ_ONCE(s->sequence);
 	smp_rmb();
@@ -200,7 +200,8 @@  static inline unsigned raw_seqcount_begin(const seqcount_t *s)
  * Use carefully, only in critical code, and comment how the barrier is
  * provided.
  */
-static inline int __read_seqcount_retry(const seqcount_t *s, unsigned start)
+static
+__always_inline int __read_seqcount_retry(const seqcount_t *s, unsigned start)
 {
 	return unlikely(s->sequence != start);
 }
@@ -215,7 +216,8 @@  static inline int __read_seqcount_retry(const seqcount_t *s, unsigned start)
  * If the critical section was invalid, it must be ignored (and typically
  * retried).
  */
-static inline int read_seqcount_retry(const seqcount_t *s, unsigned start)
+static
+__always_inline int read_seqcount_retry(const seqcount_t *s, unsigned start)
 {
 	smp_rmb();
 	return __read_seqcount_retry(s, start);
@@ -223,13 +225,13 @@  static inline int read_seqcount_retry(const seqcount_t *s, unsigned start)
 
 
 
-static inline void raw_write_seqcount_begin(seqcount_t *s)
+static __always_inline void raw_write_seqcount_begin(seqcount_t *s)
 {
 	s->sequence++;
 	smp_wmb();
 }
 
-static inline void raw_write_seqcount_end(seqcount_t *s)
+static __always_inline void raw_write_seqcount_end(seqcount_t *s)
 {
 	smp_wmb();
 	s->sequence++;
@@ -269,14 +271,14 @@  static inline void raw_write_seqcount_end(seqcount_t *s)
  *              X = false;
  *      }
  */
-static inline void raw_write_seqcount_barrier(seqcount_t *s)
+static __always_inline void raw_write_seqcount_barrier(seqcount_t *s)
 {
 	s->sequence++;
 	smp_wmb();
 	s->sequence++;
 }
 
-static inline int raw_read_seqcount_latch(seqcount_t *s)
+static __always_inline int raw_read_seqcount_latch(seqcount_t *s)
 {
 	/* Pairs with the first smp_wmb() in raw_write_seqcount_latch() */
 	int seq = READ_ONCE(s->sequence); /* ^^^ */
@@ -360,7 +362,7 @@  static inline int raw_read_seqcount_latch(seqcount_t *s)
  * NOTE: When data is a dynamic data structure; one should use regular RCU
  *       patterns to manage the lifetimes of the objects within.
  */
-static inline void raw_write_seqcount_latch(seqcount_t *s)
+static __always_inline void raw_write_seqcount_latch(seqcount_t *s)
 {
        smp_wmb();      /* prior stores before incrementing "sequence" */
        s->sequence++;
@@ -371,18 +373,19 @@  static inline void raw_write_seqcount_latch(seqcount_t *s)
  * Sequence counter only version assumes that callers are using their
  * own mutexing.
  */
-static inline void write_seqcount_begin_nested(seqcount_t *s, int subclass)
+static
+__always_inline void write_seqcount_begin_nested(seqcount_t *s, int subclass)
 {
 	raw_write_seqcount_begin(s);
 	seqcount_acquire(&s->dep_map, subclass, 0, _RET_IP_);
 }
 
-static inline void write_seqcount_begin(seqcount_t *s)
+static __always_inline void write_seqcount_begin(seqcount_t *s)
 {
 	write_seqcount_begin_nested(s, 0);
 }
 
-static inline void write_seqcount_end(seqcount_t *s)
+static __always_inline void write_seqcount_end(seqcount_t *s)
 {
 	seqcount_release(&s->dep_map, 1, _RET_IP_);
 	raw_write_seqcount_end(s);
@@ -395,7 +398,7 @@  static inline void write_seqcount_end(seqcount_t *s)
  * After write_seqcount_invalidate, no read-side seq operations will complete
  * successfully and see data older than this.
  */
-static inline void write_seqcount_invalidate(seqcount_t *s)
+static __always_inline void write_seqcount_invalidate(seqcount_t *s)
 {
 	smp_wmb();
 	s->sequence+=2;
@@ -428,12 +431,13 @@  typedef struct {
 /*
  * Read side functions for starting and finalizing a read side section.
  */
-static inline unsigned read_seqbegin(const seqlock_t *sl)
+static __always_inline unsigned read_seqbegin(const seqlock_t *sl)
 {
 	return read_seqcount_begin(&sl->seqcount);
 }
 
-static inline unsigned read_seqretry(const seqlock_t *sl, unsigned start)
+static
+__always_inline unsigned read_seqretry(const seqlock_t *sl, unsigned start)
 {
 	return read_seqcount_retry(&sl->seqcount, start);
 }
@@ -443,43 +447,43 @@  static inline unsigned read_seqretry(const seqlock_t *sl, unsigned start)
  * Acts like a normal spin_lock/unlock.
  * Don't need preempt_disable() because that is in the spin_lock already.
  */
-static inline void write_seqlock(seqlock_t *sl)
+static __always_inline void write_seqlock(seqlock_t *sl)
 {
 	spin_lock(&sl->lock);
 	write_seqcount_begin(&sl->seqcount);
 }
 
-static inline void write_sequnlock(seqlock_t *sl)
+static __always_inline void write_sequnlock(seqlock_t *sl)
 {
 	write_seqcount_end(&sl->seqcount);
 	spin_unlock(&sl->lock);
 }
 
-static inline void write_seqlock_bh(seqlock_t *sl)
+static __always_inline void write_seqlock_bh(seqlock_t *sl)
 {
 	spin_lock_bh(&sl->lock);
 	write_seqcount_begin(&sl->seqcount);
 }
 
-static inline void write_sequnlock_bh(seqlock_t *sl)
+static __always_inline void write_sequnlock_bh(seqlock_t *sl)
 {
 	write_seqcount_end(&sl->seqcount);
 	spin_unlock_bh(&sl->lock);
 }
 
-static inline void write_seqlock_irq(seqlock_t *sl)
+static __always_inline void write_seqlock_irq(seqlock_t *sl)
 {
 	spin_lock_irq(&sl->lock);
 	write_seqcount_begin(&sl->seqcount);
 }
 
-static inline void write_sequnlock_irq(seqlock_t *sl)
+static __always_inline void write_sequnlock_irq(seqlock_t *sl)
 {
 	write_seqcount_end(&sl->seqcount);
 	spin_unlock_irq(&sl->lock);
 }
 
-static inline unsigned long __write_seqlock_irqsave(seqlock_t *sl)
+static __always_inline unsigned long __write_seqlock_irqsave(seqlock_t *sl)
 {
 	unsigned long flags;
 
@@ -491,7 +495,7 @@  static inline unsigned long __write_seqlock_irqsave(seqlock_t *sl)
 #define write_seqlock_irqsave(lock, flags)				\
 	do { flags = __write_seqlock_irqsave(lock); } while (0)
 
-static inline void
+static __always_inline void
 write_sequnlock_irqrestore(seqlock_t *sl, unsigned long flags)
 {
 	write_seqcount_end(&sl->seqcount);
@@ -503,12 +507,12 @@  write_sequnlock_irqrestore(seqlock_t *sl, unsigned long flags)
  * but doesn't update the sequence number. Acts like a normal spin_lock/unlock.
  * Don't need preempt_disable() because that is in the spin_lock already.
  */
-static inline void read_seqlock_excl(seqlock_t *sl)
+static __always_inline void read_seqlock_excl(seqlock_t *sl)
 {
 	spin_lock(&sl->lock);
 }
 
-static inline void read_sequnlock_excl(seqlock_t *sl)
+static __always_inline void read_sequnlock_excl(seqlock_t *sl)
 {
 	spin_unlock(&sl->lock);
 }
@@ -523,7 +527,7 @@  static inline void read_sequnlock_excl(seqlock_t *sl)
  * whether to be a reader (even) or writer (odd).
  * N.B. seq must be initialized to an even number to begin with.
  */
-static inline void read_seqbegin_or_lock(seqlock_t *lock, int *seq)
+static __always_inline void read_seqbegin_or_lock(seqlock_t *lock, int *seq)
 {
 	if (!(*seq & 1))	/* Even */
 		*seq = read_seqbegin(lock);
@@ -531,38 +535,38 @@  static inline void read_seqbegin_or_lock(seqlock_t *lock, int *seq)
 		read_seqlock_excl(lock);
 }
 
-static inline int need_seqretry(seqlock_t *lock, int seq)
+static __always_inline int need_seqretry(seqlock_t *lock, int seq)
 {
 	return !(seq & 1) && read_seqretry(lock, seq);
 }
 
-static inline void done_seqretry(seqlock_t *lock, int seq)
+static __always_inline void done_seqretry(seqlock_t *lock, int seq)
 {
 	if (seq & 1)
 		read_sequnlock_excl(lock);
 }
 
-static inline void read_seqlock_excl_bh(seqlock_t *sl)
+static __always_inline void read_seqlock_excl_bh(seqlock_t *sl)
 {
 	spin_lock_bh(&sl->lock);
 }
 
-static inline void read_sequnlock_excl_bh(seqlock_t *sl)
+static __always_inline void read_sequnlock_excl_bh(seqlock_t *sl)
 {
 	spin_unlock_bh(&sl->lock);
 }
 
-static inline void read_seqlock_excl_irq(seqlock_t *sl)
+static __always_inline void read_seqlock_excl_irq(seqlock_t *sl)
 {
 	spin_lock_irq(&sl->lock);
 }
 
-static inline void read_sequnlock_excl_irq(seqlock_t *sl)
+static __always_inline void read_sequnlock_excl_irq(seqlock_t *sl)
 {
 	spin_unlock_irq(&sl->lock);
 }
 
-static inline unsigned long __read_seqlock_excl_irqsave(seqlock_t *sl)
+static __always_inline unsigned long __read_seqlock_excl_irqsave(seqlock_t *sl)
 {
 	unsigned long flags;
 
@@ -573,13 +577,13 @@  static inline unsigned long __read_seqlock_excl_irqsave(seqlock_t *sl)
 #define read_seqlock_excl_irqsave(lock, flags)				\
 	do { flags = __read_seqlock_excl_irqsave(lock); } while (0)
 
-static inline void
+static __always_inline void
 read_sequnlock_excl_irqrestore(seqlock_t *sl, unsigned long flags)
 {
 	spin_unlock_irqrestore(&sl->lock, flags);
 }
 
-static inline unsigned long
+static __always_inline unsigned long
 read_seqbegin_or_lock_irqsave(seqlock_t *lock, int *seq)
 {
 	unsigned long flags = 0;
@@ -592,7 +596,7 @@  read_seqbegin_or_lock_irqsave(seqlock_t *lock, int *seq)
 	return flags;
 }
 
-static inline void
+static __always_inline void
 done_seqretry_irqrestore(seqlock_t *lock, int seq, unsigned long flags)
 {
 	if (seq & 1)