diff mbox series

[v3,3/5] fu540: dtsi: add reset producer and consumer entries

Message ID 1594370308-30957-4-git-send-email-sagar.kadam@sifive.com
State Accepted
Commit ea4e9570ebed70c785e0076c65c5490cbd2c947b
Headers show
Series add DM based reset driver for SiFive SoC's | expand

Commit Message

Sagar Shrikant Kadam July 10, 2020, 8:38 a.m. UTC
The resets to DDR and ethernet sub-system are connected to
PRCI device reset control register, these reset signals
are active low and are held low at power-up. Add these reset
producer and consumer details needed by the reset driver.

Signed-off-by: Sagar Shrikant Kadam <sagar.kadam at sifive.com>
---
 arch/riscv/dts/fu540-c000-u-boot.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Bin Meng July 21, 2020, 12:50 a.m. UTC | #1
On Fri, Jul 10, 2020 at 4:39 PM Sagar Shrikant Kadam
<sagar.kadam@sifive.com> wrote:
>

> The resets to DDR and ethernet sub-system are connected to

> PRCI device reset control register, these reset signals

> are active low and are held low at power-up. Add these reset

> producer and consumer details needed by the reset driver.

>

> Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>

> ---

>  arch/riscv/dts/fu540-c000-u-boot.dtsi | 12 ++++++++++++

>  1 file changed, 12 insertions(+)

>


Reviewed-by: Bin Meng <bin.meng@windriver.com>
diff mbox series

Patch

diff --git a/arch/riscv/dts/fu540-c000-u-boot.dtsi b/arch/riscv/dts/fu540-c000-u-boot.dtsi
index afdb4f4..5302677 100644
--- a/arch/riscv/dts/fu540-c000-u-boot.dtsi
+++ b/arch/riscv/dts/fu540-c000-u-boot.dtsi
@@ -3,6 +3,8 @@ 
  * (C) Copyright 2019 SiFive, Inc
  */
 
+#include <dt-bindings/reset/sifive-fu540-prci.h>
+
 / {
 	cpus {
 		assigned-clocks = <&prci PRCI_CLK_COREPLL>;
@@ -59,6 +61,16 @@ 
 			reg = <0x0 0x2000000 0x0 0xc0000>;
 			u-boot,dm-spl;
 		};
+		prci: clock-controller at 10000000 {
+			#reset-cells = <1>;
+			resets = <&prci PRCI_RST_DDR_CTRL_N>,
+				 <&prci PRCI_RST_DDR_AXI_N>,
+				 <&prci PRCI_RST_DDR_AHB_N>,
+				 <&prci PRCI_RST_DDR_PHY_N>,
+				 <&prci PRCI_RST_GEMGXL_N>;
+			reset-names = "ddr_ctrl", "ddr_axi", "ddr_ahb",
+					"ddr_phy", "gemgxl_reset";
+		};
 		dmc: dmc at 100b0000 {
 			compatible = "sifive,fu540-c000-ddr";
 			reg = <0x0 0x100b0000 0x0 0x0800