diff mbox series

[v3,04/13] USB: serial: digi_acceleport: Remove in_interrupt() usage

Message ID 20201026140313.dpg3hkhkje2os4hw@linutronix.de
State New
Headers show
Series USB: Cleanup in_interupt/in_irq/in_atomic() usage | expand

Commit Message

Sebastian Andrzej Siewior Oct. 26, 2020, 2:03 p.m. UTC
From: "Ahmed S. Darwish" <a.darwish@linutronix.de>

The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.

The debug printk() in digi_write() prints in_interrupt() as context
information. This information is imprecisely as it does not distinguish
between hard-IRQ or disabled botton half and it does consider disabled
interrupts or preemption. It is not really helpful.

Remove the in_interrupt() printout.

Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Johan Hovold <johan@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
---
v2…v3:
  - Don't make dev_dbg() conditional on `tty'
  - Remove the part "tty happens always in process context" from the
    commit message. Johan pointed out that for PPP it may happen in
    bottom half.

 drivers/usb/serial/digi_acceleport.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

Comments

Johan Hovold Oct. 27, 2020, 8:26 a.m. UTC | #1
On Mon, Oct 26, 2020 at 03:03:13PM +0100, Sebastian Andrzej Siewior wrote:
> From: "Ahmed S. Darwish" <a.darwish@linutronix.de>
> 
> The usage of in_interrupt() in drivers is phased out and Linus clearly
> requested that code which changes behaviour depending on context should
> either be separated or the context be conveyed in an argument passed by the
> caller, which usually knows the context.
> 
> The debug printk() in digi_write() prints in_interrupt() as context
> information. This information is imprecisely as it does not distinguish
> between hard-IRQ or disabled botton half and it does consider disabled
> interrupts or preemption. It is not really helpful.

I fixed up a couple of typos and added the missing negation above so
that it reads:

  The debug printk() in digi_write() prints in_interrupt() as context
  information. This information is imprecise as it does not distinguish
  between hard-IRQ or disabled bottom half and it does not consider
  disabled interrupts or preemption. It is not really helpful.
	
> Remove the in_interrupt() printout.
> 
> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
> Cc: Johan Hovold <johan@kernel.org>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-usb@vger.kernel.org
> ---
> v2…v3:
>   - Don't make dev_dbg() conditional on `tty'
>   - Remove the part "tty happens always in process context" from the
>     commit message. Johan pointed out that for PPP it may happen in
>     bottom half.

Now applied for -next, thanks.

Johan
diff mbox series

Patch

diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 91055a191995f..016e7dec31962 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -911,9 +911,8 @@  static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
 	unsigned char *data = port->write_urb->transfer_buffer;
 	unsigned long flags = 0;
 
-	dev_dbg(&port->dev,
-		"digi_write: TOP: port=%d, count=%d, in_interrupt=%ld\n",
-		priv->dp_port_num, count, in_interrupt());
+	dev_dbg(&port->dev, "digi_write: TOP: port=%d, count=%d\n",
+		priv->dp_port_num, count);
 
 	/* copy user data (which can sleep) before getting spin lock */
 	count = min(count, port->bulk_out_size-2);