diff mbox series

[v3,1/2] dt-bindings: PCI: designware-pcie.txt: convert it to yaml

Message ID fa846c83165894accdac1715c3fddfbdcb060958.1625838920.git.mchehab+huawei@kernel.org
State New
Headers show
Series convert designware-pcie.txt and kirin-pcie.txt to yaml | expand

Commit Message

Mauro Carvalho Chehab July 9, 2021, 1:57 p.m. UTC
Convert the file to DT schema.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../bindings/pci/amlogic,meson-pcie.txt       |   4 +-
 .../bindings/pci/axis,artpec6-pcie.txt        |   2 +-
 .../bindings/pci/designware-pcie.txt          |  77 ----------
 .../bindings/pci/fsl,imx6q-pcie.txt           |   2 +-
 .../bindings/pci/hisilicon-histb-pcie.txt     |   2 +-
 .../devicetree/bindings/pci/kirin-pcie.txt    |   2 +-
 .../bindings/pci/layerscape-pci.txt           |   2 +-
 .../bindings/pci/nvidia,tegra194-pcie.txt     |   4 +-
 .../devicetree/bindings/pci/pci-armada8k.txt  |   2 +-
 .../devicetree/bindings/pci/pcie-al.txt       |   2 +-
 .../devicetree/bindings/pci/qcom,pcie.txt     |  14 +-
 .../bindings/pci/samsung,exynos-pcie.yaml     |   2 +-
 .../bindings/pci/sifive,fu740-pcie.yaml       |   2 +-
 .../devicetree/bindings/pci/snps,dw-pcie.yaml | 135 ++++++++++++++++++
 .../pci/socionext,uniphier-pcie-ep.yaml       |   2 +-
 .../devicetree/bindings/pci/ti-pci.txt        |   4 +-
 .../devicetree/bindings/pci/uniphier-pcie.txt |   2 +-
 MAINTAINERS                                   |   2 +-
 18 files changed, 160 insertions(+), 102 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/pci/designware-pcie.txt
 create mode 100644 Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml

Comments

Rob Herring (Arm) July 12, 2021, 5:45 p.m. UTC | #1
On Fri, Jul 09, 2021 at 03:57:42PM +0200, Mauro Carvalho Chehab wrote:
> Convert the file to DT schema.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  .../bindings/pci/amlogic,meson-pcie.txt       |   4 +-
>  .../bindings/pci/axis,artpec6-pcie.txt        |   2 +-
>  .../bindings/pci/designware-pcie.txt          |  77 ----------
>  .../bindings/pci/fsl,imx6q-pcie.txt           |   2 +-
>  .../bindings/pci/hisilicon-histb-pcie.txt     |   2 +-
>  .../devicetree/bindings/pci/kirin-pcie.txt    |   2 +-
>  .../bindings/pci/layerscape-pci.txt           |   2 +-
>  .../bindings/pci/nvidia,tegra194-pcie.txt     |   4 +-
>  .../devicetree/bindings/pci/pci-armada8k.txt  |   2 +-
>  .../devicetree/bindings/pci/pcie-al.txt       |   2 +-
>  .../devicetree/bindings/pci/qcom,pcie.txt     |  14 +-
>  .../bindings/pci/samsung,exynos-pcie.yaml     |   2 +-
>  .../bindings/pci/sifive,fu740-pcie.yaml       |   2 +-
>  .../devicetree/bindings/pci/snps,dw-pcie.yaml | 135 ++++++++++++++++++
>  .../pci/socionext,uniphier-pcie-ep.yaml       |   2 +-
>  .../devicetree/bindings/pci/ti-pci.txt        |   4 +-
>  .../devicetree/bindings/pci/uniphier-pcie.txt |   2 +-
>  MAINTAINERS                                   |   2 +-
>  18 files changed, 160 insertions(+), 102 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/pci/designware-pcie.txt
>  create mode 100644 Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
> index b6acbe694ffb..c3a75ac6e59d 100644
> --- a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
> @@ -3,7 +3,7 @@ Amlogic Meson AXG DWC PCIE SoC controller
>  Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core.
>  It shares common functions with the PCIe DesignWare core driver and
>  inherits common properties defined in
> -Documentation/devicetree/bindings/pci/designware-pcie.txt.
> +Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
>  
>  Additional properties are described here:
>  
> @@ -33,7 +33,7 @@ Required properties:
>  - phy-names: must contain "pcie"
>  
>  - device_type:
> -	should be "pci". As specified in designware-pcie.txt
> +	should be "pci". As specified in snps,dw-pcie.yaml
>  
>  
>  Example configuration:
> diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
> index 979dc7b6cfe8..cc6dcdb676b9 100644
> --- a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
> @@ -1,7 +1,7 @@
>  * Axis ARTPEC-6 PCIe interface
>  
>  This PCIe host controller is based on the Synopsys DesignWare PCIe IP
> -and thus inherits all the common properties defined in designware-pcie.txt.
> +and thus inherits all the common properties defined in snps,dw-pcie.yaml.
>  
>  Required properties:
>  - compatible: "axis,artpec6-pcie", "snps,dw-pcie" for ARTPEC-6 in RC mode;
> diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
> deleted file mode 100644
> index 78494c4050f7..000000000000
> --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
> +++ /dev/null
> @@ -1,77 +0,0 @@
> -* Synopsys DesignWare PCIe interface
> -
> -Required properties:
> -- compatible:
> -	"snps,dw-pcie" for RC mode;
> -	"snps,dw-pcie-ep" for EP mode;
> -- reg: For designware cores version < 4.80 contains the configuration
> -       address space. For designware core version >= 4.80, contains
> -       the configuration and ATU address space
> -- reg-names: Must be "config" for the PCIe configuration space and "atu" for
> -	     the ATU address space.
> -    (The old way of getting the configuration address space from "ranges"
> -    is deprecated and should be avoided.)
> -RC mode:
> -- #address-cells: set to <3>
> -- #size-cells: set to <2>
> -- device_type: set to "pci"
> -- ranges: ranges for the PCI memory and I/O regions
> -- #interrupt-cells: set to <1>
> -- interrupt-map-mask and interrupt-map: standard PCI
> -	properties to define the mapping of the PCIe interface to interrupt
> -	numbers.
> -EP mode:
> -- num-ib-windows: number of inbound address translation windows
> -- num-ob-windows: number of outbound address translation windows
> -
> -Optional properties:
> -- num-lanes: number of lanes to use (this property should be specified unless
> -  the link is brought already up in BIOS)
> -- reset-gpio: GPIO pin number of power good signal
> -- clocks: Must contain an entry for each entry in clock-names.
> -	See ../clocks/clock-bindings.txt for details.
> -- clock-names: Must include the following entries:
> -	- "pcie"
> -	- "pcie_bus"
> -- snps,enable-cdm-check: This is a boolean property and if present enables
> -   automatic checking of CDM (Configuration Dependent Module) registers
> -   for data corruption. CDM registers include standard PCIe configuration
> -   space registers, Port Logic registers, DMA and iATU (internal Address
> -   Translation Unit) registers.
> -RC mode:
> -- num-viewport: number of view ports configured in hardware. If a platform
> -  does not specify it, the driver assumes 2.
> -- bus-range: PCI bus numbers covered (it is recommended for new devicetrees
> -  to specify this property, to keep backwards compatibility a range of
> -  0x00-0xff is assumed if not present)
> -
> -EP mode:
> -- max-functions: maximum number of functions that can be configured
> -
> -Example configuration:
> -
> -	pcie: pcie@dfc00000 {
> -		compatible = "snps,dw-pcie";
> -		reg = <0xdfc00000 0x0001000>, /* IP registers */
> -		      <0xd0000000 0x0002000>; /* Configuration space */
> -		reg-names = "dbi", "config";
> -		#address-cells = <3>;
> -		#size-cells = <2>;
> -		device_type = "pci";
> -		ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000
> -			  0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
> -		interrupts = <25>, <24>;
> -		#interrupt-cells = <1>;
> -		num-lanes = <1>;
> -	};
> -or
> -	pcie: pcie@dfc00000 {
> -		compatible = "snps,dw-pcie-ep";
> -		reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
> -		      <0xdfc01000 0x0001000>, /* IP registers 2 */
> -		      <0xd0000000 0x2000000>; /* Configuration space */
> -		reg-names = "dbi", "dbi2", "addr_space";
> -		num-ib-windows = <6>;
> -		num-ob-windows = <2>;
> -		num-lanes = <1>;
> -	};
> diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> index de4b2baf91e8..5cee38ce711b 100644
> --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> @@ -1,7 +1,7 @@
>  * Freescale i.MX6 PCIe interface
>  
>  This PCIe host controller is based on the Synopsys DesignWare PCIe IP
> -and thus inherits all the common properties defined in designware-pcie.txt.
> +and thus inherits all the common properties defined in snps,dw-pcie.yaml.
>  
>  Required properties:
>  - compatible:
> diff --git a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
> index 760b4d740616..5f0cf6c2fef3 100644
> --- a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
> @@ -3,7 +3,7 @@ HiSilicon STB PCIe host bridge DT description
>  The HiSilicon STB PCIe host controller is based on the DesignWare PCIe core.
>  It shares common functions with the DesignWare PCIe core driver and inherits
>  common properties defined in
> -Documentation/devicetree/bindings/pci/designware-pcie.txt.
> +Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
>  
>  Additional properties are described here:
>  
> diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
> index 585aadfeafd1..3a36eeb1c434 100644
> --- a/Documentation/devicetree/bindings/pci/kirin-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
> @@ -3,7 +3,7 @@ HiSilicon Kirin SoCs PCIe host DT description
>  Kirin PCIe host controller is based on the Synopsys DesignWare PCI core.
>  It shares common functions with the PCIe DesignWare core driver and
>  inherits common properties defined in
> -Documentation/devicetree/bindings/pci/designware-pcie.txt.
> +Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
>  
>  Additional properties are described here:
>  
> diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> index 6d898dd4a8e2..f36efa73a470 100644
> --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> @@ -1,7 +1,7 @@
>  Freescale Layerscape PCIe controller
>  
>  This PCIe host controller is based on the Synopsys DesignWare PCIe IP
> -and thus inherits all the common properties defined in designware-pcie.txt.
> +and thus inherits all the common properties defined in snps,dw-pcie.yaml.
>  
>  This controller derives its clocks from the Reset Configuration Word (RCW)
>  which is used to describe the PLL settings at the time of chip-reset.
> diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
> index bd43f3c3ece4..498a7b3bd2a6 100644
> --- a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
> @@ -1,7 +1,7 @@
>  NVIDIA Tegra PCIe controller (Synopsys DesignWare Core based)
>  
>  This PCIe controller is based on the Synopsis Designware PCIe IP
> -and thus inherits all the common properties defined in designware-pcie.txt.
> +and thus inherits all the common properties defined in snps,dw-pcie.yaml.
>  Some of the controller instances are dual mode where in they can work either
>  in root port mode or endpoint mode but one at a time.
>  
> @@ -22,7 +22,7 @@ Required properties:
>    property.
>  - reg-names: Must include the following entries:
>    "appl": Controller's application logic registers
> -  "config": As per the definition in designware-pcie.txt
> +  "config": As per the definition in snps,dw-pcie.yaml
>    "atu_dma": iATU and DMA registers. This is where the iATU (internal Address
>               Translation Unit) registers of the PCIe core are made available
>               for SW access.
> diff --git a/Documentation/devicetree/bindings/pci/pci-armada8k.txt b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
> index 7a813d0e6d63..ff25a134befa 100644
> --- a/Documentation/devicetree/bindings/pci/pci-armada8k.txt
> +++ b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
> @@ -1,7 +1,7 @@
>  * Marvell Armada 7K/8K PCIe interface
>  
>  This PCIe host controller is based on the Synopsys DesignWare PCIe IP
> -and thus inherits all the common properties defined in designware-pcie.txt.
> +and thus inherits all the common properties defined in snps,dw-pcie.yaml.
>  
>  Required properties:
>  - compatible: "marvell,armada8k-pcie"
> diff --git a/Documentation/devicetree/bindings/pci/pcie-al.txt b/Documentation/devicetree/bindings/pci/pcie-al.txt
> index 557a5089229d..2ad1fe466eab 100644
> --- a/Documentation/devicetree/bindings/pci/pcie-al.txt
> +++ b/Documentation/devicetree/bindings/pci/pcie-al.txt
> @@ -2,7 +2,7 @@
>  
>  Amazon's Annapurna Labs PCIe Host Controller is based on the Synopsys DesignWare
>  PCI core. It inherits common properties defined in
> -Documentation/devicetree/bindings/pci/designware-pcie.txt.
> +Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
>  
>  Properties of the host controller node that differ from it are:
>  
> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> index 0da458a051b6..1226b19b8c3d 100644
> --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> @@ -33,22 +33,22 @@
>  - device_type:
>  	Usage: required
>  	Value type: <string>
> -	Definition: Should be "pci". As specified in designware-pcie.txt
> +	Definition: Should be "pci". As specified in snps,dw-pcie.yaml
>  
>  - #address-cells:
>  	Usage: required
>  	Value type: <u32>
> -	Definition: Should be 3. As specified in designware-pcie.txt
> +	Definition: Should be 3. As specified in snps,dw-pcie.yaml
>  
>  - #size-cells:
>  	Usage: required
>  	Value type: <u32>
> -	Definition: Should be 2. As specified in designware-pcie.txt
> +	Definition: Should be 2. As specified in snps,dw-pcie.yaml
>  
>  - ranges:
>  	Usage: required
>  	Value type: <prop-encoded-array>
> -	Definition: As specified in designware-pcie.txt
> +	Definition: As specified in snps,dw-pcie.yaml
>  
>  - interrupts:
>  	Usage: required
> @@ -63,17 +63,17 @@
>  - #interrupt-cells:
>  	Usage: required
>  	Value type: <u32>
> -	Definition: Should be 1. As specified in designware-pcie.txt
> +	Definition: Should be 1. As specified in snps,dw-pcie.yaml
>  
>  - interrupt-map-mask:
>  	Usage: required
>  	Value type: <prop-encoded-array>
> -	Definition: As specified in designware-pcie.txt
> +	Definition: As specified in snps,dw-pcie.yaml
>  
>  - interrupt-map:
>  	Usage: required
>  	Value type: <prop-encoded-array>
> -	Definition: As specified in designware-pcie.txt
> +	Definition: As specified in snps,dw-pcie.yaml
>  
>  - clocks:
>  	Usage: required
> diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml
> index 1810bf722350..3f49c8017c7a 100644
> --- a/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml
> @@ -13,7 +13,7 @@ maintainers:
>  description: |+
>    Exynos5433 SoC PCIe host controller is based on the Synopsys DesignWare
>    PCIe IP and thus inherits all the common properties defined in
> -  designware-pcie.txt.
> +  snps,dw-pcie.yaml.
>  
>  allOf:
>    - $ref: /schemas/pci/pci-bus.yaml#
> diff --git a/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
> index b03cbb9b6602..0cc1998a9d46 100644
> --- a/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
> @@ -10,7 +10,7 @@ description: |+
>    SiFive FU740 PCIe host controller is based on the Synopsys DesignWare
>    PCI core. It shares common features with the PCIe DesignWare core and
>    inherits common properties defined in
> -  Documentation/devicetree/bindings/pci/designware-pcie.txt.
> +  Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
>  
>  maintainers:
>    - Paul Walmsley <paul.walmsley@sifive.com>
> diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
> new file mode 100644
> index 000000000000..de463338b6ed
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
> @@ -0,0 +1,135 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/snps,dw-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Synopsys DesignWare PCIe interface
> +
> +maintainers:
> +  - Jingoo Han <jingoohan1@gmail.com>
> +  - Gustavo Pimentel <gustavo.pimentel@synopsys.com>
> +
> +description: |
> +  Synopsys DesignWare PCIe host controller
> +
> +properties:
> +  compatible:
> +    anyOf:
> +      - {}
> +      - items:
> +          contains:

Drop 'contains'. 'items' schema applies to array elements whereas 
'contains' applies to an array.

> +            enum:
> +              - snps,dw-pcie
> +              - snps,dw-pcie-ep
> +
> +  reg:
> +    description: |
> +      It should contain Data Bus Interface (dbi, dbi2) registers for all
> +      versions.

Not all versions have dbi2.

> +      For designware cores version < 4.80, contains the configuration
> +      address space. For designware core version >= 4.80,
> +      contains the configuration and ATU address space.

config space should always be present. For a brief time (around 2014), 
it was not required but has been since. For purposes of the schema, we 
can say always required.

ATU is optional in 4.80 or later. 

> +    minItems: 2
> +    maxItems: 4
> +
> +  reg-names:
> +    minItems: 2
> +    maxItems: 4
> +    items:
> +      contains:

Drop contains.

> +        enum: [dbi, dbi2, config, atu, addr_space]
> +
> +  num-lanes:
> +    $ref: '/schemas/types.yaml#/definitions/uint32'
> +    description: |
> +      number of lanes to use (this property should be specified unless
> +      the link is brought already up in BIOS)
> +    maxItems: 1

Drop. Not an array. 'maximum: 16' is needed though pci-bus.yaml may 
cover that already.

> +
> +  reset-gpio:
> +    description: GPIO pin number of PERST# signal
> +    maxItems: 1

deprecated: true

And add 'reset-gpios'

> +
> +  "snps,enable-cdm-check":

Don't need quotes.

> +    type: boolean
> +    description: |
> +      This is a boolean property and if present enables
> +      automatic checking of CDM (Configuration Dependent Module) registers
> +      for data corruption. CDM registers include standard PCIe configuration
> +      space registers, Port Logic registers, DMA and iATU (internal Address
> +      Translation Unit) registers.
> +
> +  num-viewport:
> +    description: |
> +      number of view ports configured in hardware. If a platform
> +      does not specify it, the driver assumes 2.

That's no longer true. This and the next 2 properties are now detected 
if not specified.

> +    deprecated: true
> +
> +  num-ib-windows:
> +    description: number of inbound address translation windows
> +    maxItems: 1
> +    deprecated: true
> +
> +  num-ob-windows:
> +    description: number of outbound address translation windows
> +    maxItems: 1
> +    deprecated: true
> +
> +  # The following are optional properties for EP mode
> +
> +  max-functions:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: maximum number of functions that can be configured
> +
> +required:
> +  - reg
> +  - reg-names
> +  - compatible
> +
> +additionalProperties: false

unevaluatedProperties: false

so that we can have child PCI devices...

> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: snps,dw-pcie
> +    then:
> +      allOf:
> +        - $ref: /schemas/pci/pci-bus.yaml#
> +
> +patternProperties:
> +  "pcie?_ep@[0-9a-f]+$":
> +    type: object
> +    properties:
> +      compatible:
> +        contains:
> +          const: snps,dw-pcie-ep

This doesn't make sense. This is defining a child node of the DW 
controller with 'snps,dw-pcie-ep'.

> +
> +  "pcie?@[0-9a-f]+$":
> +    type: object
> +
> +examples:
> +  - |
> +    pcie: pcie@dfc00000 {

Drop unused labels.

> +      compatible = "snps,dw-pcie";
> +      reg = <0xdfc00000 0x0001000>, /* IP registers */
> +            <0xd0000000 0x0002000>; /* Configuration space */
> +      reg-names = "dbi", "config";
> +      #address-cells = <3>;
> +      #size-cells = <2>;
> +      device_type = "pci";
> +      ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000>,
> +               <0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
> +      interrupts = <25>, <24>;
> +      #interrupt-cells = <1>;
> +      num-lanes = <1>;
> +    };
> +    pcie_ep: pcie_ep@dfd00000 {

'pcie-ep' is preferred.

> +      compatible = "snps,dw-pcie-ep";
> +      reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
> +            <0xdfc01000 0x0001000>, /* IP registers 2 */
> +            <0xd0000000 0x2000000>; /* Configuration space */
> +      reg-names = "dbi", "dbi2", "addr_space";
> +    };
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
index b6acbe694ffb..c3a75ac6e59d 100644
--- a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
@@ -3,7 +3,7 @@  Amlogic Meson AXG DWC PCIE SoC controller
 Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core.
 It shares common functions with the PCIe DesignWare core driver and
 inherits common properties defined in
-Documentation/devicetree/bindings/pci/designware-pcie.txt.
+Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
 
 Additional properties are described here:
 
@@ -33,7 +33,7 @@  Required properties:
 - phy-names: must contain "pcie"
 
 - device_type:
-	should be "pci". As specified in designware-pcie.txt
+	should be "pci". As specified in snps,dw-pcie.yaml
 
 
 Example configuration:
diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
index 979dc7b6cfe8..cc6dcdb676b9 100644
--- a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
@@ -1,7 +1,7 @@ 
 * Axis ARTPEC-6 PCIe interface
 
 This PCIe host controller is based on the Synopsys DesignWare PCIe IP
-and thus inherits all the common properties defined in designware-pcie.txt.
+and thus inherits all the common properties defined in snps,dw-pcie.yaml.
 
 Required properties:
 - compatible: "axis,artpec6-pcie", "snps,dw-pcie" for ARTPEC-6 in RC mode;
diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
deleted file mode 100644
index 78494c4050f7..000000000000
--- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
+++ /dev/null
@@ -1,77 +0,0 @@ 
-* Synopsys DesignWare PCIe interface
-
-Required properties:
-- compatible:
-	"snps,dw-pcie" for RC mode;
-	"snps,dw-pcie-ep" for EP mode;
-- reg: For designware cores version < 4.80 contains the configuration
-       address space. For designware core version >= 4.80, contains
-       the configuration and ATU address space
-- reg-names: Must be "config" for the PCIe configuration space and "atu" for
-	     the ATU address space.
-    (The old way of getting the configuration address space from "ranges"
-    is deprecated and should be avoided.)
-RC mode:
-- #address-cells: set to <3>
-- #size-cells: set to <2>
-- device_type: set to "pci"
-- ranges: ranges for the PCI memory and I/O regions
-- #interrupt-cells: set to <1>
-- interrupt-map-mask and interrupt-map: standard PCI
-	properties to define the mapping of the PCIe interface to interrupt
-	numbers.
-EP mode:
-- num-ib-windows: number of inbound address translation windows
-- num-ob-windows: number of outbound address translation windows
-
-Optional properties:
-- num-lanes: number of lanes to use (this property should be specified unless
-  the link is brought already up in BIOS)
-- reset-gpio: GPIO pin number of power good signal
-- clocks: Must contain an entry for each entry in clock-names.
-	See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-	- "pcie"
-	- "pcie_bus"
-- snps,enable-cdm-check: This is a boolean property and if present enables
-   automatic checking of CDM (Configuration Dependent Module) registers
-   for data corruption. CDM registers include standard PCIe configuration
-   space registers, Port Logic registers, DMA and iATU (internal Address
-   Translation Unit) registers.
-RC mode:
-- num-viewport: number of view ports configured in hardware. If a platform
-  does not specify it, the driver assumes 2.
-- bus-range: PCI bus numbers covered (it is recommended for new devicetrees
-  to specify this property, to keep backwards compatibility a range of
-  0x00-0xff is assumed if not present)
-
-EP mode:
-- max-functions: maximum number of functions that can be configured
-
-Example configuration:
-
-	pcie: pcie@dfc00000 {
-		compatible = "snps,dw-pcie";
-		reg = <0xdfc00000 0x0001000>, /* IP registers */
-		      <0xd0000000 0x0002000>; /* Configuration space */
-		reg-names = "dbi", "config";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000
-			  0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
-		interrupts = <25>, <24>;
-		#interrupt-cells = <1>;
-		num-lanes = <1>;
-	};
-or
-	pcie: pcie@dfc00000 {
-		compatible = "snps,dw-pcie-ep";
-		reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
-		      <0xdfc01000 0x0001000>, /* IP registers 2 */
-		      <0xd0000000 0x2000000>; /* Configuration space */
-		reg-names = "dbi", "dbi2", "addr_space";
-		num-ib-windows = <6>;
-		num-ob-windows = <2>;
-		num-lanes = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
index de4b2baf91e8..5cee38ce711b 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
@@ -1,7 +1,7 @@ 
 * Freescale i.MX6 PCIe interface
 
 This PCIe host controller is based on the Synopsys DesignWare PCIe IP
-and thus inherits all the common properties defined in designware-pcie.txt.
+and thus inherits all the common properties defined in snps,dw-pcie.yaml.
 
 Required properties:
 - compatible:
diff --git a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
index 760b4d740616..5f0cf6c2fef3 100644
--- a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
@@ -3,7 +3,7 @@  HiSilicon STB PCIe host bridge DT description
 The HiSilicon STB PCIe host controller is based on the DesignWare PCIe core.
 It shares common functions with the DesignWare PCIe core driver and inherits
 common properties defined in
-Documentation/devicetree/bindings/pci/designware-pcie.txt.
+Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
 
 Additional properties are described here:
 
diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
index 585aadfeafd1..3a36eeb1c434 100644
--- a/Documentation/devicetree/bindings/pci/kirin-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
@@ -3,7 +3,7 @@  HiSilicon Kirin SoCs PCIe host DT description
 Kirin PCIe host controller is based on the Synopsys DesignWare PCI core.
 It shares common functions with the PCIe DesignWare core driver and
 inherits common properties defined in
-Documentation/devicetree/bindings/pci/designware-pcie.txt.
+Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
 
 Additional properties are described here:
 
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index 6d898dd4a8e2..f36efa73a470 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -1,7 +1,7 @@ 
 Freescale Layerscape PCIe controller
 
 This PCIe host controller is based on the Synopsys DesignWare PCIe IP
-and thus inherits all the common properties defined in designware-pcie.txt.
+and thus inherits all the common properties defined in snps,dw-pcie.yaml.
 
 This controller derives its clocks from the Reset Configuration Word (RCW)
 which is used to describe the PLL settings at the time of chip-reset.
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
index bd43f3c3ece4..498a7b3bd2a6 100644
--- a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
@@ -1,7 +1,7 @@ 
 NVIDIA Tegra PCIe controller (Synopsys DesignWare Core based)
 
 This PCIe controller is based on the Synopsis Designware PCIe IP
-and thus inherits all the common properties defined in designware-pcie.txt.
+and thus inherits all the common properties defined in snps,dw-pcie.yaml.
 Some of the controller instances are dual mode where in they can work either
 in root port mode or endpoint mode but one at a time.
 
@@ -22,7 +22,7 @@  Required properties:
   property.
 - reg-names: Must include the following entries:
   "appl": Controller's application logic registers
-  "config": As per the definition in designware-pcie.txt
+  "config": As per the definition in snps,dw-pcie.yaml
   "atu_dma": iATU and DMA registers. This is where the iATU (internal Address
              Translation Unit) registers of the PCIe core are made available
              for SW access.
diff --git a/Documentation/devicetree/bindings/pci/pci-armada8k.txt b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
index 7a813d0e6d63..ff25a134befa 100644
--- a/Documentation/devicetree/bindings/pci/pci-armada8k.txt
+++ b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
@@ -1,7 +1,7 @@ 
 * Marvell Armada 7K/8K PCIe interface
 
 This PCIe host controller is based on the Synopsys DesignWare PCIe IP
-and thus inherits all the common properties defined in designware-pcie.txt.
+and thus inherits all the common properties defined in snps,dw-pcie.yaml.
 
 Required properties:
 - compatible: "marvell,armada8k-pcie"
diff --git a/Documentation/devicetree/bindings/pci/pcie-al.txt b/Documentation/devicetree/bindings/pci/pcie-al.txt
index 557a5089229d..2ad1fe466eab 100644
--- a/Documentation/devicetree/bindings/pci/pcie-al.txt
+++ b/Documentation/devicetree/bindings/pci/pcie-al.txt
@@ -2,7 +2,7 @@ 
 
 Amazon's Annapurna Labs PCIe Host Controller is based on the Synopsys DesignWare
 PCI core. It inherits common properties defined in
-Documentation/devicetree/bindings/pci/designware-pcie.txt.
+Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
 
 Properties of the host controller node that differ from it are:
 
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
index 0da458a051b6..1226b19b8c3d 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -33,22 +33,22 @@ 
 - device_type:
 	Usage: required
 	Value type: <string>
-	Definition: Should be "pci". As specified in designware-pcie.txt
+	Definition: Should be "pci". As specified in snps,dw-pcie.yaml
 
 - #address-cells:
 	Usage: required
 	Value type: <u32>
-	Definition: Should be 3. As specified in designware-pcie.txt
+	Definition: Should be 3. As specified in snps,dw-pcie.yaml
 
 - #size-cells:
 	Usage: required
 	Value type: <u32>
-	Definition: Should be 2. As specified in designware-pcie.txt
+	Definition: Should be 2. As specified in snps,dw-pcie.yaml
 
 - ranges:
 	Usage: required
 	Value type: <prop-encoded-array>
-	Definition: As specified in designware-pcie.txt
+	Definition: As specified in snps,dw-pcie.yaml
 
 - interrupts:
 	Usage: required
@@ -63,17 +63,17 @@ 
 - #interrupt-cells:
 	Usage: required
 	Value type: <u32>
-	Definition: Should be 1. As specified in designware-pcie.txt
+	Definition: Should be 1. As specified in snps,dw-pcie.yaml
 
 - interrupt-map-mask:
 	Usage: required
 	Value type: <prop-encoded-array>
-	Definition: As specified in designware-pcie.txt
+	Definition: As specified in snps,dw-pcie.yaml
 
 - interrupt-map:
 	Usage: required
 	Value type: <prop-encoded-array>
-	Definition: As specified in designware-pcie.txt
+	Definition: As specified in snps,dw-pcie.yaml
 
 - clocks:
 	Usage: required
diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml
index 1810bf722350..3f49c8017c7a 100644
--- a/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml
@@ -13,7 +13,7 @@  maintainers:
 description: |+
   Exynos5433 SoC PCIe host controller is based on the Synopsys DesignWare
   PCIe IP and thus inherits all the common properties defined in
-  designware-pcie.txt.
+  snps,dw-pcie.yaml.
 
 allOf:
   - $ref: /schemas/pci/pci-bus.yaml#
diff --git a/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
index b03cbb9b6602..0cc1998a9d46 100644
--- a/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
@@ -10,7 +10,7 @@  description: |+
   SiFive FU740 PCIe host controller is based on the Synopsys DesignWare
   PCI core. It shares common features with the PCIe DesignWare core and
   inherits common properties defined in
-  Documentation/devicetree/bindings/pci/designware-pcie.txt.
+  Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
 
 maintainers:
   - Paul Walmsley <paul.walmsley@sifive.com>
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
new file mode 100644
index 000000000000..de463338b6ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
@@ -0,0 +1,135 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/snps,dw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare PCIe interface
+
+maintainers:
+  - Jingoo Han <jingoohan1@gmail.com>
+  - Gustavo Pimentel <gustavo.pimentel@synopsys.com>
+
+description: |
+  Synopsys DesignWare PCIe host controller
+
+properties:
+  compatible:
+    anyOf:
+      - {}
+      - items:
+          contains:
+            enum:
+              - snps,dw-pcie
+              - snps,dw-pcie-ep
+
+  reg:
+    description: |
+      It should contain Data Bus Interface (dbi, dbi2) registers for all
+      versions.
+      For designware cores version < 4.80, contains the configuration
+      address space. For designware core version >= 4.80,
+      contains the configuration and ATU address space.
+    minItems: 2
+    maxItems: 4
+
+  reg-names:
+    minItems: 2
+    maxItems: 4
+    items:
+      contains:
+        enum: [dbi, dbi2, config, atu, addr_space]
+
+  num-lanes:
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: |
+      number of lanes to use (this property should be specified unless
+      the link is brought already up in BIOS)
+    maxItems: 1
+
+  reset-gpio:
+    description: GPIO pin number of PERST# signal
+    maxItems: 1
+
+  "snps,enable-cdm-check":
+    type: boolean
+    description: |
+      This is a boolean property and if present enables
+      automatic checking of CDM (Configuration Dependent Module) registers
+      for data corruption. CDM registers include standard PCIe configuration
+      space registers, Port Logic registers, DMA and iATU (internal Address
+      Translation Unit) registers.
+
+  num-viewport:
+    description: |
+      number of view ports configured in hardware. If a platform
+      does not specify it, the driver assumes 2.
+    deprecated: true
+
+  num-ib-windows:
+    description: number of inbound address translation windows
+    maxItems: 1
+    deprecated: true
+
+  num-ob-windows:
+    description: number of outbound address translation windows
+    maxItems: 1
+    deprecated: true
+
+  # The following are optional properties for EP mode
+
+  max-functions:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum number of functions that can be configured
+
+required:
+  - reg
+  - reg-names
+  - compatible
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: snps,dw-pcie
+    then:
+      allOf:
+        - $ref: /schemas/pci/pci-bus.yaml#
+
+patternProperties:
+  "pcie?_ep@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        contains:
+          const: snps,dw-pcie-ep
+
+  "pcie?@[0-9a-f]+$":
+    type: object
+
+examples:
+  - |
+    pcie: pcie@dfc00000 {
+      compatible = "snps,dw-pcie";
+      reg = <0xdfc00000 0x0001000>, /* IP registers */
+            <0xd0000000 0x0002000>; /* Configuration space */
+      reg-names = "dbi", "config";
+      #address-cells = <3>;
+      #size-cells = <2>;
+      device_type = "pci";
+      ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000>,
+               <0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
+      interrupts = <25>, <24>;
+      #interrupt-cells = <1>;
+      num-lanes = <1>;
+    };
+    pcie_ep: pcie_ep@dfd00000 {
+      compatible = "snps,dw-pcie-ep";
+      reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
+            <0xdfc01000 0x0001000>, /* IP registers 2 */
+            <0xd0000000 0x2000000>; /* Configuration space */
+      reg-names = "dbi", "dbi2", "addr_space";
+    };
diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
index d6cf8a560ef0..ae8c8f701a56 100644
--- a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
@@ -10,7 +10,7 @@  description: |
   UniPhier PCIe endpoint controller is based on the Synopsys DesignWare
   PCI core. It shares common features with the PCIe DesignWare core and
   inherits common properties defined in
-  Documentation/devicetree/bindings/pci/designware-pcie.txt.
+  Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
 
 maintainers:
   - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
index d5cbfe6b0d89..8147e3e3e29b 100644
--- a/Documentation/devicetree/bindings/pci/ti-pci.txt
+++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
@@ -12,7 +12,7 @@  PCIe DesignWare Controller
 	       number of PHYs as specified in *phys* property.
  - ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",
 	       where <X> is the instance number of the pcie from the HW spec.
- - num-lanes as specified in ../designware-pcie.txt
+ - num-lanes as specified in ../snps,dw-pcie.yaml
  - ti,syscon-lane-sel : phandle/offset pair. Phandle to the system control
 			module and the register offset to specify lane
 			selection.
@@ -32,7 +32,7 @@  HOST MODE
    device_type,
    ranges,
    interrupt-map-mask,
-   interrupt-map : as specified in ../designware-pcie.txt
+   interrupt-map : as specified in ../snps,dw-pcie.yaml
  - ti,syscon-unaligned-access: phandle to the syscon DT node. The 1st argument
 			       should contain the register offset within syscon
 			       and the 2nd argument should contain the bit field
diff --git a/Documentation/devicetree/bindings/pci/uniphier-pcie.txt b/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
index c4b7381733a0..359585db049f 100644
--- a/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
@@ -6,7 +6,7 @@  on Socionext UniPhier SoCs.
 UniPhier PCIe host controller is based on the Synopsys DesignWare PCI core.
 It shares common functions with the PCIe DesignWare core driver and inherits
 common properties defined in
-Documentation/devicetree/bindings/pci/designware-pcie.txt.
+Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
 
 Required properties:
 - compatible: Should be "socionext,uniphier-pcie".
diff --git a/MAINTAINERS b/MAINTAINERS
index a334dc13ec96..55ca4cac17b0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14231,7 +14231,7 @@  M:	Jingoo Han <jingoohan1@gmail.com>
 M:	Gustavo Pimentel <gustavo.pimentel@synopsys.com>
 L:	linux-pci@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/pci/designware-pcie.txt
+F:	Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
 F:	drivers/pci/controller/dwc/*designware*
 
 PCI DRIVER FOR TI DRA7XX/J721E