diff mbox series

[v5,04/21] soc: dt-bindings: qcom: add gpr bindings

Message ID 20210903112032.25834-5-srinivas.kandagatla@linaro.org
State New
Headers show
Series ASoC: qcom: Add AudioReach support | expand

Commit Message

Srinivas Kandagatla Sept. 3, 2021, 11:20 a.m. UTC
Qualcomm Generic Packet router aka GPR is the IPC mechanism found
in AudioReach next generation signal processing framework to perform
command and response messages between various processors.

GPR has concepts of static and dynamic port, all static services like
APM (Audio Processing Manager), PRM (Proxy resource manager) have
fixed port numbers where as dynamic services like graphs have dynamic
port numbers which are allocated at runtime. All GPR packet messages
will have source and destination domain and port along with opcode
and payload.

This support is added using existing APR driver to reuse most of
the code.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

---
 .../bindings/soc/qcom/qcom,apr.yaml           | 41 +++++++++++++++----
 include/dt-bindings/soc/qcom,gpr.h            | 18 ++++++++
 2 files changed, 52 insertions(+), 7 deletions(-)
 create mode 100644 include/dt-bindings/soc/qcom,gpr.h

-- 
2.21.0

Comments

Rob Herring (Arm) Sept. 7, 2021, 10:52 p.m. UTC | #1
On Fri, Sep 03, 2021 at 12:20:15PM +0100, Srinivas Kandagatla wrote:
> Qualcomm Generic Packet router aka GPR is the IPC mechanism found

> in AudioReach next generation signal processing framework to perform

> command and response messages between various processors.

> 

> GPR has concepts of static and dynamic port, all static services like

> APM (Audio Processing Manager), PRM (Proxy resource manager) have

> fixed port numbers where as dynamic services like graphs have dynamic

> port numbers which are allocated at runtime. All GPR packet messages

> will have source and destination domain and port along with opcode

> and payload.

> 

> This support is added using existing APR driver to reuse most of

> the code.

> 

> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

> ---

>  .../bindings/soc/qcom/qcom,apr.yaml           | 41 +++++++++++++++----

>  include/dt-bindings/soc/qcom,gpr.h            | 18 ++++++++

>  2 files changed, 52 insertions(+), 7 deletions(-)

>  create mode 100644 include/dt-bindings/soc/qcom,gpr.h

> 

> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml

> index 922c8567c134..14d75f6a556e 100644

> --- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml

> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml

> @@ -4,20 +4,21 @@

>  $id: "http://devicetree.org/schemas/soc/qcom/qcom,apr.yaml#"

>  $schema: "http://devicetree.org/meta-schemas/core.yaml#"

>  

> -title: Qualcomm APR (Asynchronous Packet Router) binding

> +title: Qualcomm APR/GPR (Asynchronous/Generic Packet Router) binding

>  

>  maintainers:

>    - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

>  

>  description: |

> -  This binding describes the Qualcomm APR, APR is a IPC protocol for

> -  communication between Application processor and QDSP. APR is mainly

> +  This binding describes the Qualcomm APR/GPR, APR/GPR is a IPC protocol for

> +  communication between Application processor and QDSP. APR/GPR is mainly

>    used for audio/voice services on the QDSP.

>  

>  properties:

>    compatible:

>      enum:

>        - qcom,apr-v2

> +      - qcom,gpr

>  

>    qcom,apr-domain:

>      $ref: /schemas/types.yaml#/definitions/uint32

> @@ -45,6 +46,10 @@ properties:

>          5 = Application processor Domain

>          6 = Modem2 Domain

>          7 = Application Processor2 Domain

> +      Selects the processor domain for gpr

> +        1 = Modem Domain

> +        2 = Audio DSP Domain

> +        3 = Application Processor Domain

>  

>    '#address-cells':

>      const: 1

> @@ -52,12 +57,12 @@ properties:

>    '#size-cells':

>      const: 0

>  

> -#APR Services

> +#APR/GPR Services

>  patternProperties:

> -  "^service@[3-9a-d]$":

> +  "^service@[1-9a-d]$":

>      type: object

>      description:

> -      APR node's client devices use subnodes for desired static port services.

> +      APR/GPR node's client devices use subnodes for desired static port services.

>  

>      properties:

>        compatible:

> @@ -66,9 +71,11 @@ patternProperties:

>            - qcom,q6asm

>            - qcom,q6afe

>            - qcom,q6adm

> +          - qcom,q6apm

> +          - qcom,q6prm

>  

>        reg:

> -        enum: [3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13]

> +        enum: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13]


Might as well switch to minimum/maximum.

>          description:

>            APR Service ID

>              3 = DSP Core Service

> @@ -82,6 +89,11 @@ patternProperties:

>              11 = Core voice processor.

>              12 = Ultrasound stream manager.

>              13 = Listen stream manager.

> +          GPR Service ID

> +            1 = Audio Process Manager Service

> +            2 = Proxy Resource Manager Service.

> +            3 = AMDB Service.

> +            4 = Voice processing manager.

>  

>        qcom,protection-domain:

>          $ref: /schemas/types.yaml#/definitions/string-array

> @@ -140,3 +152,18 @@ examples:

>            qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";

>          };

>      };

> +

> +  - |

> +    #include <dt-bindings/soc/qcom,gpr.h>

> +    gpr {

> +        compatible = "qcom,gpr";

> +        qcom,domain = <GPR_DOMAIN_ID_ADSP>;

> +        #address-cells = <1>;

> +        #size-cells = <0>;

> +

> +        service@1 {

> +          compatible = "qcom,q6apm";

> +          reg = <GPR_APM_MODULE_IID>;

> +          qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";

> +        };

> +    };

> diff --git a/include/dt-bindings/soc/qcom,gpr.h b/include/dt-bindings/soc/qcom,gpr.h

> new file mode 100644

> index 000000000000..1c68906e079c

> --- /dev/null

> +++ b/include/dt-bindings/soc/qcom,gpr.h

> @@ -0,0 +1,18 @@

> +/* SPDX-License-Identifier: GPL-2.0 */


Dual license.

> +#ifndef __DT_BINDINGS_QCOM_GPR_H

> +#define __DT_BINDINGS_QCOM_GPR_H

> +

> +/* DOMAINS */

> +

> +#define GPR_DOMAIN_ID_MODEM	1

> +#define GPR_DOMAIN_ID_ADSP	2

> +#define GPR_DOMAIN_ID_APPS	3

> +

> +/* Static Services */

> +

> +#define GPR_APM_MODULE_IID		1

> +#define GPR_PRM_MODULE_IID		2

> +#define GPR_AMDB_MODULE_IID		3

> +#define GPR_VCPM_MODULE_IID		4

> +

> +#endif /* __DT_BINDINGS_QCOM_GPR_H */

> -- 

> 2.21.0

> 

>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml
index 922c8567c134..14d75f6a556e 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml
@@ -4,20 +4,21 @@ 
 $id: "http://devicetree.org/schemas/soc/qcom/qcom,apr.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Qualcomm APR (Asynchronous Packet Router) binding
+title: Qualcomm APR/GPR (Asynchronous/Generic Packet Router) binding
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
 
 description: |
-  This binding describes the Qualcomm APR, APR is a IPC protocol for
-  communication between Application processor and QDSP. APR is mainly
+  This binding describes the Qualcomm APR/GPR, APR/GPR is a IPC protocol for
+  communication between Application processor and QDSP. APR/GPR is mainly
   used for audio/voice services on the QDSP.
 
 properties:
   compatible:
     enum:
       - qcom,apr-v2
+      - qcom,gpr
 
   qcom,apr-domain:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -45,6 +46,10 @@  properties:
         5 = Application processor Domain
         6 = Modem2 Domain
         7 = Application Processor2 Domain
+      Selects the processor domain for gpr
+        1 = Modem Domain
+        2 = Audio DSP Domain
+        3 = Application Processor Domain
 
   '#address-cells':
     const: 1
@@ -52,12 +57,12 @@  properties:
   '#size-cells':
     const: 0
 
-#APR Services
+#APR/GPR Services
 patternProperties:
-  "^service@[3-9a-d]$":
+  "^service@[1-9a-d]$":
     type: object
     description:
-      APR node's client devices use subnodes for desired static port services.
+      APR/GPR node's client devices use subnodes for desired static port services.
 
     properties:
       compatible:
@@ -66,9 +71,11 @@  patternProperties:
           - qcom,q6asm
           - qcom,q6afe
           - qcom,q6adm
+          - qcom,q6apm
+          - qcom,q6prm
 
       reg:
-        enum: [3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13]
+        enum: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13]
         description:
           APR Service ID
             3 = DSP Core Service
@@ -82,6 +89,11 @@  patternProperties:
             11 = Core voice processor.
             12 = Ultrasound stream manager.
             13 = Listen stream manager.
+          GPR Service ID
+            1 = Audio Process Manager Service
+            2 = Proxy Resource Manager Service.
+            3 = AMDB Service.
+            4 = Voice processing manager.
 
       qcom,protection-domain:
         $ref: /schemas/types.yaml#/definitions/string-array
@@ -140,3 +152,18 @@  examples:
           qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
         };
     };
+
+  - |
+    #include <dt-bindings/soc/qcom,gpr.h>
+    gpr {
+        compatible = "qcom,gpr";
+        qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        service@1 {
+          compatible = "qcom,q6apm";
+          reg = <GPR_APM_MODULE_IID>;
+          qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+        };
+    };
diff --git a/include/dt-bindings/soc/qcom,gpr.h b/include/dt-bindings/soc/qcom,gpr.h
new file mode 100644
index 000000000000..1c68906e079c
--- /dev/null
+++ b/include/dt-bindings/soc/qcom,gpr.h
@@ -0,0 +1,18 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __DT_BINDINGS_QCOM_GPR_H
+#define __DT_BINDINGS_QCOM_GPR_H
+
+/* DOMAINS */
+
+#define GPR_DOMAIN_ID_MODEM	1
+#define GPR_DOMAIN_ID_ADSP	2
+#define GPR_DOMAIN_ID_APPS	3
+
+/* Static Services */
+
+#define GPR_APM_MODULE_IID		1
+#define GPR_PRM_MODULE_IID		2
+#define GPR_AMDB_MODULE_IID		3
+#define GPR_VCPM_MODULE_IID		4
+
+#endif /* __DT_BINDINGS_QCOM_GPR_H */