diff mbox series

[11/15] dt-bindings: pinctrl: qcom,sm8250: add gpio-reserved-ranges and gpio-line-names

Message ID 20220925110608.145728-12-krzysztof.kozlowski@linaro.org
State Superseded
Headers show
Series pinctrl/arm64: qcom: 4th set of Qualcomm TLMM pinctrl schema warnings | expand

Commit Message

Krzysztof Kozlowski Sept. 25, 2022, 11:06 a.m. UTC
Document common GPIO properties (gpio-reserved-ranges and
gpio-line-names), already used on qrb5165-rb5 board.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml   | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Konrad Dybcio Sept. 27, 2022, 12:41 p.m. UTC | #1
On 25.09.2022 13:06, Krzysztof Kozlowski wrote:
> Document common GPIO properties (gpio-reserved-ranges and
> gpio-line-names), already used on qrb5165-rb5 board.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml   | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
> index c44d02d28bc9..d7d8e5d3b659 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
> @@ -49,6 +49,13 @@ properties:
>    gpio-ranges:
>      maxItems: 1
>  
> +  gpio-reserved-ranges:
> +    minItems: 1
Not sure about this.. However, this will apply to 99.9% of boards, so:

Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>

Konrad
> +    maxItems: 90
> +
> +  gpio-line-names:
> +    maxItems: 180
> +
>    wakeup-parent: true
>  
>  #PIN CONFIGURATION NODES
Krzysztof Kozlowski Sept. 27, 2022, 1:54 p.m. UTC | #2
On 27/09/2022 14:41, Konrad Dybcio wrote:
> 
> 
> On 25.09.2022 13:06, Krzysztof Kozlowski wrote:
>> Document common GPIO properties (gpio-reserved-ranges and
>> gpio-line-names), already used on qrb5165-rb5 board.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> ---
>>  .../devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml   | 7 +++++++
>>  1 file changed, 7 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
>> index c44d02d28bc9..d7d8e5d3b659 100644
>> --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
>> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
>> @@ -49,6 +49,13 @@ properties:
>>    gpio-ranges:
>>      maxItems: 1
>>  
>> +  gpio-reserved-ranges:
>> +    minItems: 1
> Not sure about this.. However, this will apply to 99.9% of boards, so:

We need some minimum number.

Best regards,
Krzysztof
Rob Herring (Arm) Sept. 29, 2022, 8:16 p.m. UTC | #3
On Sun, 25 Sep 2022 13:06:04 +0200, Krzysztof Kozlowski wrote:
> Document common GPIO properties (gpio-reserved-ranges and
> gpio-line-names), already used on qrb5165-rb5 board.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml   | 7 +++++++
>  1 file changed, 7 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
index c44d02d28bc9..d7d8e5d3b659 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
@@ -49,6 +49,13 @@  properties:
   gpio-ranges:
     maxItems: 1
 
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 90
+
+  gpio-line-names:
+    maxItems: 180
+
   wakeup-parent: true
 
 #PIN CONFIGURATION NODES