diff mbox series

[v2,10/10] ARM: dts: stm32: add RNG node for STM32MP13x platforms

Message ID 20230911120203.774632-11-gatien.chevallier@foss.st.com
State Superseded
Headers show
Series hwrng: stm32: support STM32MP13x platforms | expand

Commit Message

Gatien CHEVALLIER Sept. 11, 2023, 12:02 p.m. UTC
The RNG on STM32MP13 offers upgrades like customization of its
configuration and the conditional reset.

The hardware RNG should be managed in the secure world for but it
is supported on Linux. Therefore, is it not default enabled.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
---
 arch/arm/boot/dts/st/stm32mp131.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Krzysztof Kozlowski Sept. 12, 2023, 2:38 p.m. UTC | #1
On 11/09/2023 14:02, Gatien Chevallier wrote:
> The RNG on STM32MP13 offers upgrades like customization of its
> configuration and the conditional reset.
> 
> The hardware RNG should be managed in the secure world for but it
> is supported on Linux. Therefore, is it not default enabled.
> 
> Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
> ---
>  arch/arm/boot/dts/st/stm32mp131.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
> index ac90fcbf0c09..39db82b782eb 100644
> --- a/arch/arm/boot/dts/st/stm32mp131.dtsi
> +++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
> @@ -1220,6 +1220,14 @@ mdma: dma-controller@58000000 {
>  			dma-requests = <48>;
>  		};
>  
> +		rng: rng@54004000 {
> +			compatible = "st,stm32mp13-rng";
> +			reg = <0x54004000 0x400>;
> +			clocks = <&rcc RNG1_K>;
> +			resets = <&rcc RNG1_R>;
> +			status = "disabled";

Why? What other resources are missing?

Best regards,
Krzysztof
Gatien CHEVALLIER Sept. 13, 2023, 7:52 a.m. UTC | #2
On 9/12/23 16:38, Krzysztof Kozlowski wrote:
> On 11/09/2023 14:02, Gatien Chevallier wrote:
>> The RNG on STM32MP13 offers upgrades like customization of its
>> configuration and the conditional reset.
>>
>> The hardware RNG should be managed in the secure world for but it
>> is supported on Linux. Therefore, is it not default enabled.
>>
>> Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
>> ---
>>   arch/arm/boot/dts/st/stm32mp131.dtsi | 8 ++++++++
>>   1 file changed, 8 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
>> index ac90fcbf0c09..39db82b782eb 100644
>> --- a/arch/arm/boot/dts/st/stm32mp131.dtsi
>> +++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
>> @@ -1220,6 +1220,14 @@ mdma: dma-controller@58000000 {
>>   			dma-requests = <48>;
>>   		};
>>   
>> +		rng: rng@54004000 {
>> +			compatible = "st,stm32mp13-rng";
>> +			reg = <0x54004000 0x400>;
>> +			clocks = <&rcc RNG1_K>;
>> +			resets = <&rcc RNG1_R>;
>> +			status = "disabled";
> 
> Why? What other resources are missing?
> 
> Best regards,
> Krzysztof
> 

Hello Krzysztof,

Our default implementation is to handle the RNG in OP-TEE for
these platforms. Therefore, it goes through optee-rng driver.
The RNG services are exposed by a PTA (Pseudo Trusted Application)
in OP-TEE. In this case, there's no need to enable the RNG node
in the Linux Kernel.

Best regards,
Gatien
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
index ac90fcbf0c09..39db82b782eb 100644
--- a/arch/arm/boot/dts/st/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
@@ -1220,6 +1220,14 @@  mdma: dma-controller@58000000 {
 			dma-requests = <48>;
 		};
 
+		rng: rng@54004000 {
+			compatible = "st,stm32mp13-rng";
+			reg = <0x54004000 0x400>;
+			clocks = <&rcc RNG1_K>;
+			resets = <&rcc RNG1_R>;
+			status = "disabled";
+		};
+
 		fmc: memory-controller@58002000 {
 			compatible = "st,stm32mp1-fmc2-ebi";
 			reg = <0x58002000 0x1000>;