diff mbox series

[v2,01/12] dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit

Message ID 20231228125805.661725-2-tudor.ambarus@linaro.org
State Superseded
Headers show
Series GS101 Oriole: CMU_PERIC0 support and USI updates | expand

Commit Message

Tudor Ambarus Dec. 28, 2023, 12:57 p.m. UTC
Add dt-schema documentation for the Connectivity Peripheral 0 (PERIC0)
clock management unit.

Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
---
v2:
- fix comments as per Sam's suggestion and collect his R-b tag
- Rob's suggestion of renaming the clock-names to just "bus" and "ip"
  was not implemented as I felt it affects readability in the driver
  and consistency with other exynos clock drivers. I will happily update
  the names in the -rc phase if someone else has a stronger opinion than
  mine. 

 .../bindings/clock/google,gs101-clock.yaml    | 25 +++++-
 include/dt-bindings/clock/google,gs101.h      | 81 +++++++++++++++++++
 2 files changed, 104 insertions(+), 2 deletions(-)

Comments

Peter Griffin Jan. 8, 2024, 2:18 p.m. UTC | #1
Hi Tudor,

On Thu, 28 Dec 2023 at 12:58, Tudor Ambarus <tudor.ambarus@linaro.org> wrote:
>
> Add dt-schema documentation for the Connectivity Peripheral 0 (PERIC0)
> clock management unit.
>
> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
> ---
> v2:
> - fix comments as per Sam's suggestion and collect his R-b tag
> - Rob's suggestion of renaming the clock-names to just "bus" and "ip"
>   was not implemented as I felt it affects readability in the driver
>   and consistency with other exynos clock drivers. I will happily update
>   the names in the -rc phase if someone else has a stronger opinion than
>   mine.
>

It would be good to get Krzysztof and Robs view on whether they agree
with the above rationale or whether they would still like to see the
names updated.

Personally I like the consistency, grepability and the fact the
current name encodes whether it is a gate, divider into the name.
Seeing 'sss' or 'ip' as a clock name in the driver code doesn't tell
you a lot without having to then cross reference with the dts.

Is there some rationale and/or benefit behind having the shorter
names? The only thing I could think of is trying to partially re-use
this file on future SoCs like gs201 which might be clocked
differently, but then these exynos clock drivers seem to be SoC
specific anyway.

Anyways apart from that:
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>

kind regards,

Peter
Rob Herring (Arm) Jan. 9, 2024, 4:03 a.m. UTC | #2
On Thu, Dec 28, 2023 at 12:57:54PM +0000, Tudor Ambarus wrote:
> Add dt-schema documentation for the Connectivity Peripheral 0 (PERIC0)
> clock management unit.
> 
> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
> ---
> v2:
> - fix comments as per Sam's suggestion and collect his R-b tag
> - Rob's suggestion of renaming the clock-names to just "bus" and "ip"
>   was not implemented as I felt it affects readability in the driver
>   and consistency with other exynos clock drivers. I will happily update
>   the names in the -rc phase if someone else has a stronger opinion than
>   mine. 

I'll defer to Krzysztof.

Rob
Rob Herring (Arm) Jan. 9, 2024, 4:08 a.m. UTC | #3
On Mon, Jan 08, 2024 at 02:18:21PM +0000, Peter Griffin wrote:
> Hi Tudor,
> 
> On Thu, 28 Dec 2023 at 12:58, Tudor Ambarus <tudor.ambarus@linaro.org> wrote:
> >
> > Add dt-schema documentation for the Connectivity Peripheral 0 (PERIC0)
> > clock management unit.
> >
> > Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
> > Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
> > ---
> > v2:
> > - fix comments as per Sam's suggestion and collect his R-b tag
> > - Rob's suggestion of renaming the clock-names to just "bus" and "ip"
> >   was not implemented as I felt it affects readability in the driver
> >   and consistency with other exynos clock drivers. I will happily update
> >   the names in the -rc phase if someone else has a stronger opinion than
> >   mine.
> >
> 
> It would be good to get Krzysztof and Robs view on whether they agree
> with the above rationale or whether they would still like to see the
> names updated.
> 
> Personally I like the consistency, grepability and the fact the
> current name encodes whether it is a gate, divider into the name.
> Seeing 'sss' or 'ip' as a clock name in the driver code doesn't tell
> you a lot without having to then cross reference with the dts.
> 
> Is there some rationale and/or benefit behind having the shorter
> names? The only thing I could think of is trying to partially re-use
> this file on future SoCs like gs201 which might be clocked
> differently, but then these exynos clock drivers seem to be SoC
> specific anyway.

The point of -names is to identify one entry from another in the list. 
Having the name of the block is just redundant.

I like consistency, but not when it's a pattern we don't want.

Rob
Krzysztof Kozlowski Jan. 9, 2024, 11:09 a.m. UTC | #4
On 09/01/2024 05:03, Rob Herring wrote:
> On Thu, Dec 28, 2023 at 12:57:54PM +0000, Tudor Ambarus wrote:
>> Add dt-schema documentation for the Connectivity Peripheral 0 (PERIC0)
>> clock management unit.
>>
>> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
>> Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
>> ---
>> v2:
>> - fix comments as per Sam's suggestion and collect his R-b tag
>> - Rob's suggestion of renaming the clock-names to just "bus" and "ip"
>>   was not implemented as I felt it affects readability in the driver
>>   and consistency with other exynos clock drivers. I will happily update
>>   the names in the -rc phase if someone else has a stronger opinion than
>>   mine. 
> 
> I'll defer to Krzysztof.

I miss the point why clock-names cannot be fixed now. This is the name
of property, not the input clock name.

Best regards,
Krzysztof
Tudor Ambarus Jan. 9, 2024, 11:58 a.m. UTC | #5
On 1/9/24 11:09, Krzysztof Kozlowski wrote:
> On 09/01/2024 05:03, Rob Herring wrote:
>> On Thu, Dec 28, 2023 at 12:57:54PM +0000, Tudor Ambarus wrote:
>>> Add dt-schema documentation for the Connectivity Peripheral 0 (PERIC0)
>>> clock management unit.
>>>
>>> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
>>> Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
>>> ---
>>> v2:
>>> - fix comments as per Sam's suggestion and collect his R-b tag
>>> - Rob's suggestion of renaming the clock-names to just "bus" and "ip"
>>>   was not implemented as I felt it affects readability in the driver
>>>   and consistency with other exynos clock drivers. I will happily update
>>>   the names in the -rc phase if someone else has a stronger opinion than
>>>   mine. 
>>
>> I'll defer to Krzysztof.
> 
> I miss the point why clock-names cannot be fixed now. This is the name
> of property, not the input clock name.

They can be fixed now. I've just aired the fixes at:
https://lore.kernel.org/linux-arm-kernel/20240109114908.3623645-1-tudor.ambarus@linaro.org/

Preparing v3 for this patch set to include the updated names here too.

Thanks,
ta
Krzysztof Kozlowski Jan. 9, 2024, 3:01 p.m. UTC | #6
On 09/01/2024 12:58, Tudor Ambarus wrote:
> 
> 
> On 1/9/24 11:09, Krzysztof Kozlowski wrote:
>> On 09/01/2024 05:03, Rob Herring wrote:
>>> On Thu, Dec 28, 2023 at 12:57:54PM +0000, Tudor Ambarus wrote:
>>>> Add dt-schema documentation for the Connectivity Peripheral 0 (PERIC0)
>>>> clock management unit.
>>>>
>>>> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
>>>> Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
>>>> ---
>>>> v2:
>>>> - fix comments as per Sam's suggestion and collect his R-b tag
>>>> - Rob's suggestion of renaming the clock-names to just "bus" and "ip"
>>>>   was not implemented as I felt it affects readability in the driver
>>>>   and consistency with other exynos clock drivers. I will happily update
>>>>   the names in the -rc phase if someone else has a stronger opinion than
>>>>   mine. 
>>>
>>> I'll defer to Krzysztof.
>>
>> I miss the point why clock-names cannot be fixed now. This is the name
>> of property, not the input clock name.
> 
> They can be fixed now. I've just aired the fixes at:
> https://lore.kernel.org/linux-arm-kernel/20240109114908.3623645-1-tudor.ambarus@linaro.org/
> 
> Preparing v3 for this patch set to include the updated names here too.

I think I was not that clear enough. I did not get your current patchset
- so PERIC0 clock controller - cannot use new naming.

Best regards,
Krzysztof
Tudor Ambarus Jan. 9, 2024, 4:12 p.m. UTC | #7
On 1/9/24 15:01, Krzysztof Kozlowski wrote:
> On 09/01/2024 12:58, Tudor Ambarus wrote:
>>
>>
>> On 1/9/24 11:09, Krzysztof Kozlowski wrote:
>>> On 09/01/2024 05:03, Rob Herring wrote:
>>>> On Thu, Dec 28, 2023 at 12:57:54PM +0000, Tudor Ambarus wrote:
>>>>> Add dt-schema documentation for the Connectivity Peripheral 0 (PERIC0)
>>>>> clock management unit.
>>>>>
>>>>> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
>>>>> Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
>>>>> ---
>>>>> v2:
>>>>> - fix comments as per Sam's suggestion and collect his R-b tag
>>>>> - Rob's suggestion of renaming the clock-names to just "bus" and "ip"
>>>>>   was not implemented as I felt it affects readability in the driver
>>>>>   and consistency with other exynos clock drivers. I will happily update
>>>>>   the names in the -rc phase if someone else has a stronger opinion than
>>>>>   mine. 
>>>>
>>>> I'll defer to Krzysztof.
>>>
>>> I miss the point why clock-names cannot be fixed now. This is the name
>>> of property, not the input clock name.
>>
>> They can be fixed now. I've just aired the fixes at:
>> https://lore.kernel.org/linux-arm-kernel/20240109114908.3623645-1-tudor.ambarus@linaro.org/
>>
>> Preparing v3 for this patch set to include the updated names here too.
> 
> I think I was not that clear enough. I did not get your current patchset
> - so PERIC0 clock controller - cannot use new naming.
> 

Ok, I understand that the fixes from
https://lore.kernel.org/linux-arm-kernel/20240109114908.3623645-1-tudor.ambarus@linaro.org/

are NACK-ed and I shall use the full clock-names in this patch set as
well, thus "dout_cmu_peric0_bus", and "dout_cmu_peric0_ip". I don't mind
changing them back, will send a v4 using the full clock names.

Out of curiosity, why can't we change the names? All gs101 patches are
for v6.8, thus they haven't made a release yet. We still have the -rc
phase where we can fix things.

Thanks for the guidance.
ta
Krzysztof Kozlowski Jan. 9, 2024, 6:38 p.m. UTC | #8
On 09/01/2024 17:12, Tudor Ambarus wrote:
> 
> 
> On 1/9/24 15:01, Krzysztof Kozlowski wrote:
>> On 09/01/2024 12:58, Tudor Ambarus wrote:
>>>
>>>
>>> On 1/9/24 11:09, Krzysztof Kozlowski wrote:
>>>> On 09/01/2024 05:03, Rob Herring wrote:
>>>>> On Thu, Dec 28, 2023 at 12:57:54PM +0000, Tudor Ambarus wrote:
>>>>>> Add dt-schema documentation for the Connectivity Peripheral 0 (PERIC0)
>>>>>> clock management unit.
>>>>>>
>>>>>> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
>>>>>> Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
>>>>>> ---
>>>>>> v2:
>>>>>> - fix comments as per Sam's suggestion and collect his R-b tag
>>>>>> - Rob's suggestion of renaming the clock-names to just "bus" and "ip"
>>>>>>   was not implemented as I felt it affects readability in the driver
>>>>>>   and consistency with other exynos clock drivers. I will happily update
>>>>>>   the names in the -rc phase if someone else has a stronger opinion than
>>>>>>   mine. 
>>>>>
>>>>> I'll defer to Krzysztof.
>>>>
>>>> I miss the point why clock-names cannot be fixed now. This is the name
>>>> of property, not the input clock name.
>>>
>>> They can be fixed now. I've just aired the fixes at:
>>> https://lore.kernel.org/linux-arm-kernel/20240109114908.3623645-1-tudor.ambarus@linaro.org/
>>>
>>> Preparing v3 for this patch set to include the updated names here too.
>>
>> I think I was not that clear enough. I did not get your current patchset
>> - so PERIC0 clock controller - cannot use new naming.
>>
> 
> Ok, I understand that the fixes from
> https://lore.kernel.org/linux-arm-kernel/20240109114908.3623645-1-tudor.ambarus@linaro.org/
> 
> are NACK-ed and I shall use the full clock-names in this patch set as
> well, thus "dout_cmu_peric0_bus", and "dout_cmu_peric0_ip". I don't mind
> changing them back, will send a v4 using the full clock names.

They are not rejected, it is just independent thing. At least looks like
independent.

> Out of curiosity, why can't we change the names? All gs101 patches are
> for v6.8, thus they haven't made a release yet. We still have the -rc
> phase where we can fix things.

We can change. I would not bother that much with doing that, because I
sent already them to arm-soc. That means I need to consider this as
fixes and I just did not want to deal with it.

The question is quite different for a new clock controller - peric0.
What parts of driver readability is affected by using "bus" name?

Best regards,
Krzysztof
Tudor Ambarus Jan. 10, 2024, 7:25 a.m. UTC | #9
On 1/9/24 18:38, Krzysztof Kozlowski wrote:
> On 09/01/2024 17:12, Tudor Ambarus wrote:
>>
>>
>> On 1/9/24 15:01, Krzysztof Kozlowski wrote:
>>> On 09/01/2024 12:58, Tudor Ambarus wrote:
>>>>
>>>>
>>>> On 1/9/24 11:09, Krzysztof Kozlowski wrote:
>>>>> On 09/01/2024 05:03, Rob Herring wrote:
>>>>>> On Thu, Dec 28, 2023 at 12:57:54PM +0000, Tudor Ambarus wrote:
>>>>>>> Add dt-schema documentation for the Connectivity Peripheral 0 (PERIC0)
>>>>>>> clock management unit.
>>>>>>>
>>>>>>> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
>>>>>>> Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
>>>>>>> ---
>>>>>>> v2:
>>>>>>> - fix comments as per Sam's suggestion and collect his R-b tag
>>>>>>> - Rob's suggestion of renaming the clock-names to just "bus" and "ip"
>>>>>>>   was not implemented as I felt it affects readability in the driver
>>>>>>>   and consistency with other exynos clock drivers. I will happily update
>>>>>>>   the names in the -rc phase if someone else has a stronger opinion than
>>>>>>>   mine. 
>>>>>>
>>>>>> I'll defer to Krzysztof.
>>>>>
>>>>> I miss the point why clock-names cannot be fixed now. This is the name
>>>>> of property, not the input clock name.
>>>>
>>>> They can be fixed now. I've just aired the fixes at:
>>>> https://lore.kernel.org/linux-arm-kernel/20240109114908.3623645-1-tudor.ambarus@linaro.org/
>>>>
>>>> Preparing v3 for this patch set to include the updated names here too.
>>>
>>> I think I was not that clear enough. I did not get your current patchset
>>> - so PERIC0 clock controller - cannot use new naming.
>>>
>>
>> Ok, I understand that the fixes from
>> https://lore.kernel.org/linux-arm-kernel/20240109114908.3623645-1-tudor.ambarus@linaro.org/
>>
>> are NACK-ed and I shall use the full clock-names in this patch set as
>> well, thus "dout_cmu_peric0_bus", and "dout_cmu_peric0_ip". I don't mind
>> changing them back, will send a v4 using the full clock names.
> 
> They are not rejected, it is just independent thing. At least looks like
> independent.

The datasheet is not so verbose, but as I understand, CMU_MISC and
CMU_PERIC0 are clock domains of the same clock controller, thus I think
they should be treated the same. We should either get rid of the name of
the block in the clock names or keep it, but be consistent across all
the clock domains.
> 
>> Out of curiosity, why can't we change the names? All gs101 patches are
>> for v6.8, thus they haven't made a release yet. We still have the -rc
>> phase where we can fix things.
> 
> We can change. I would not bother that much with doing that, because I
> sent already them to arm-soc. That means I need to consider this as
> fixes and I just did not want to deal with it.
> 
> The question is quite different for a new clock controller - peric0.
> What parts of driver readability is affected by using "bus" name?
> 

As Peter pointed out, if keeping the shorter names, one would have to
cross reference with the device tree in order to determine which clock
is used, its type, whether it's a gate or a divider. Whereas if we keep
the full name, one can see what's the clock about with a glance. The
full name coincides with the clock names that are defined in the clock
driver, thus one can grep for the full name from the device tree and hit
the clock definition from the clock driver.

The cons of keeping the full name is that keeping the name of the block
in the DT's clock name is just redundant. Rob was clear and said that
including the block name in the -names is a pattern we don't want.

In what concerns my personal preference, I like the full name. At the
same time, I see Rob's point, and if that turns out to be a rule, let's
respect it. So I'm fine with both, but let's be consistent across the
driver and have the same clock name scheme for all the clock domains,
otherwise it will just look weird.

Thanks,
ta
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
index 3eebc03a309b..ba54c13c55bc 100644
--- a/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml
@@ -30,14 +30,15 @@  properties:
       - google,gs101-cmu-top
       - google,gs101-cmu-apm
       - google,gs101-cmu-misc
+      - google,gs101-cmu-peric0
 
   clocks:
     minItems: 1
-    maxItems: 2
+    maxItems: 3
 
   clock-names:
     minItems: 1
-    maxItems: 2
+    maxItems: 3
 
   "#clock-cells":
     const: 1
@@ -88,6 +89,26 @@  allOf:
             - const: dout_cmu_misc_bus
             - const: dout_cmu_misc_sss
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: google,gs101-cmu-peric0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24.576 MHz)
+            - description: Connectivity Peripheral 0 bus clock (from CMU_TOP)
+            - description: Connectivity Peripheral 0 IP clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_cmu_peric0_bus
+            - const: dout_cmu_peric0_ip
+
 additionalProperties: false
 
 examples:
diff --git a/include/dt-bindings/clock/google,gs101.h b/include/dt-bindings/clock/google,gs101.h
index 21adec22387c..64e6bdc6359c 100644
--- a/include/dt-bindings/clock/google,gs101.h
+++ b/include/dt-bindings/clock/google,gs101.h
@@ -389,4 +389,85 @@ 
 #define CLK_GOUT_MISC_WDT_CLUSTER1_PCLK			73
 #define CLK_GOUT_MISC_XIU_D_MISC_ACLK			74
 
+/* CMU_PERIC0 */
+#define CLK_MOUT_PERIC0_BUS_USER			1
+#define CLK_MOUT_PERIC0_I3C_USER			2
+#define CLK_MOUT_PERIC0_USI0_UART_USER			3
+#define CLK_MOUT_PERIC0_USI14_USI_USER			4
+#define CLK_MOUT_PERIC0_USI1_USI_USER			5
+#define CLK_MOUT_PERIC0_USI2_USI_USER			6
+#define CLK_MOUT_PERIC0_USI3_USI_USER			7
+#define CLK_MOUT_PERIC0_USI4_USI_USER			8
+#define CLK_MOUT_PERIC0_USI5_USI_USER			9
+#define CLK_MOUT_PERIC0_USI6_USI_USER			10
+#define CLK_MOUT_PERIC0_USI7_USI_USER			11
+#define CLK_MOUT_PERIC0_USI8_USI_USER			12
+#define CLK_DOUT_PERIC0_I3C				13
+#define CLK_DOUT_PERIC0_USI0_UART			14
+#define CLK_DOUT_PERIC0_USI14_USI			15
+#define CLK_DOUT_PERIC0_USI1_USI			16
+#define CLK_DOUT_PERIC0_USI2_USI			17
+#define CLK_DOUT_PERIC0_USI3_USI			18
+#define CLK_DOUT_PERIC0_USI4_USI			19
+#define CLK_DOUT_PERIC0_USI5_USI			20
+#define CLK_DOUT_PERIC0_USI6_USI			21
+#define CLK_DOUT_PERIC0_USI7_USI			22
+#define CLK_DOUT_PERIC0_USI8_USI			23
+#define CLK_GOUT_PERIC0_IP				24
+#define CLK_GOUT_PERIC0_PERIC0_CMU_PERIC0_PCLK		25
+#define CLK_GOUT_PERIC0_CLK_PERIC0_OSCCLK_CLK		26
+#define CLK_GOUT_PERIC0_D_TZPC_PERIC0_PCLK		27
+#define CLK_GOUT_PERIC0_GPC_PERIC0_PCLK			28
+#define CLK_GOUT_PERIC0_GPIO_PERIC0_PCLK		29
+#define CLK_GOUT_PERIC0_LHM_AXI_P_PERIC0_I_CLK		30
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_0		31
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_1		32
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_10		33
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_11		34
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_12		35
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_13		36
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_14		37
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_15		38
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_2		39
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_3		40
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_4		41
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_5		42
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_6		43
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7		44
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_8		45
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_9		46
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_0		47
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_1		48
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_10		49
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_11		50
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_12		51
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_13		52
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_14		53
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_15		54
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_2		55
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_3		56
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_4		57
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_5		58
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_6		59
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7		60
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_8		61
+#define CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_9		62
+#define CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0		63
+#define CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2		64
+#define CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_0		65
+#define CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_2		66
+#define CLK_GOUT_PERIC0_CLK_PERIC0_BUSP_CLK		67
+#define CLK_GOUT_PERIC0_CLK_PERIC0_I3C_CLK		68
+#define CLK_GOUT_PERIC0_CLK_PERIC0_USI0_UART_CLK	69
+#define CLK_GOUT_PERIC0_CLK_PERIC0_USI14_USI_CLK	70
+#define CLK_GOUT_PERIC0_CLK_PERIC0_USI1_USI_CLK		71
+#define CLK_GOUT_PERIC0_CLK_PERIC0_USI2_USI_CLK		72
+#define CLK_GOUT_PERIC0_CLK_PERIC0_USI3_USI_CLK		73
+#define CLK_GOUT_PERIC0_CLK_PERIC0_USI4_USI_CLK		74
+#define CLK_GOUT_PERIC0_CLK_PERIC0_USI5_USI_CLK		75
+#define CLK_GOUT_PERIC0_CLK_PERIC0_USI6_USI_CLK		76
+#define CLK_GOUT_PERIC0_CLK_PERIC0_USI7_USI_CLK		77
+#define CLK_GOUT_PERIC0_CLK_PERIC0_USI8_USI_CLK		78
+#define CLK_GOUT_PERIC0_SYSREG_PERIC0_PCLK		79
+
 #endif /* _DT_BINDINGS_CLOCK_GOOGLE_GS101_H */