diff mbox series

[v6,1/4] dt-bindings: media: add Maxim MAX96717 GMSL2 Serializer

Message ID 20240325131634.165361-2-julien.massot@collabora.com
State Superseded
Headers show
Series Add support for MAX96714/F and MAX96717/F GMSL2 ser/des | expand

Commit Message

Julien Massot March 25, 2024, 1:16 p.m. UTC
Add DT bindings for Maxim MAX96717 GMSL2 Serializer.

Signed-off-by: Julien Massot <julien.massot@collabora.com>
---
Change since v5:
 - Reverse the fallback MAX96717 can fallback to MAX96717F
 - Use const instead of enum for MAX96717F compatible
 
Change since v4:
 - Add compatible for MAX96717 and use it as a fallback for MAX96717F
 - Remove extra '|' for decriptions
 - Reference 'i2c-gate' instead of 'i2c-controller'

Change since v3:
 - Renamed file to maxim,max96717.yaml dropped the 'f' suffix
 - Added lane-polarities and bus type properties to the CSI endpoint

Change since v2:
 - remove reg description
 - add data lanes min/maxItems
 - Use generic node name 
---
 .../bindings/media/i2c/maxim,max96717.yaml    | 164 ++++++++++++++++++
 1 file changed, 164 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml

Comments

Conor Dooley March 25, 2024, 6:17 p.m. UTC | #1
On Mon, Mar 25, 2024 at 02:16:31PM +0100, Julien Massot wrote:
> Add DT bindings for Maxim MAX96717 GMSL2 Serializer.
> 
> Signed-off-by: Julien Massot <julien.massot@collabora.com>
> ---
> Change since v5:
>  - Reverse the fallback MAX96717 can fallback to MAX96717F
>  - Use const instead of enum for MAX96717F compatible

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Thanks,
Conor.
Sakari Ailus April 12, 2024, 11:10 a.m. UTC | #2
Hi Julien,

On Mon, Mar 25, 2024 at 02:16:31PM +0100, Julien Massot wrote:
> Add DT bindings for Maxim MAX96717 GMSL2 Serializer.
> 
> Signed-off-by: Julien Massot <julien.massot@collabora.com>
> ---
> Change since v5:
>  - Reverse the fallback MAX96717 can fallback to MAX96717F
>  - Use const instead of enum for MAX96717F compatible
>  
> Change since v4:
>  - Add compatible for MAX96717 and use it as a fallback for MAX96717F
>  - Remove extra '|' for decriptions
>  - Reference 'i2c-gate' instead of 'i2c-controller'
> 
> Change since v3:
>  - Renamed file to maxim,max96717.yaml dropped the 'f' suffix
>  - Added lane-polarities and bus type properties to the CSI endpoint
> 
> Change since v2:
>  - remove reg description
>  - add data lanes min/maxItems
>  - Use generic node name 
> ---
>  .../bindings/media/i2c/maxim,max96717.yaml    | 164 ++++++++++++++++++
>  1 file changed, 164 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
> new file mode 100644
> index 000000000000..ac8bf11a6fa5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
> @@ -0,0 +1,164 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2024 Collabora Ltd.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/maxim,max96717.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MAX96717 CSI-2 to GMSL2 Serializer
> +
> +maintainers:
> +  - Julien Massot <julien.massot@collabora.com>
> +
> +description:
> +  The MAX96717 serializer converts MIPI CSI-2 D-PHY or C-PHY formatted input
> +  into GMSL2 serial outputs. The device allows the GMSL2 link to
> +  simultaneously transmit bidirectional control-channel data while forward
> +  video transmissions are in progress. The MAX96717 can connect to one
> +  remotely located deserializer using industry-standard coax or STP
> +  interconnects. The device cans operate in pixel or tunnel mode. In pixel mode
> +  the MAX96717 can select the MIPI datatype, while the tunnel mode forward all the MIPI
> +  data received by the serializer.
> +  The MAX96717 supports Reference Over Reverse (channel),
> +  to generate a clock output for the sensor from the GMSL reverse channel.
> +
> +  The GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the
> +  forward direction and 187.5Mbps in the reverse direction.
> +  MAX96717F only supports a fixed rate of 3Gbps in the forward direction.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: maxim,max96717f
> +      - items:
> +          - enum:
> +              - maxim,max96717
> +          - const: maxim,max96717f
> +
> +  '#gpio-cells':
> +    const: 2
> +    description:
> +      First cell is the GPIO pin number, second cell is the flags. The GPIO pin
> +      number must be in range of [0, 10].
> +
> +  gpio-controller: true
> +
> +  '#clock-cells':
> +    const: 0
> +
> +  reg:
> +    maxItems: 1
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description: CSI-2 Input port
> +
> +        properties:
> +          endpoint:
> +            $ref: /schemas/media/video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +              lane-polarities:
> +                minItems: 1
> +                maxItems: 5
> +
> +              bus-type:
> +                enum:
> +                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
> +                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY

Now that you have C-PHY here, does the hardware support data line order
mapping? Just wondering. The bindings can be added without that and support
added later on---that's what the video-interfaces.yaml is currently
missing.

lane-polarities is only valid for D-PHY. What about the data-lanes, the
maximum is probably different for C-PHY?

> +
> +            required:
> +              - data-lanes
> +              - bus-type
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        unevaluatedProperties: false
> +        description: GMSL Output port
> +
> +    required:
> +      - port@1
> +
> +  i2c-gate:
> +    $ref: /schemas/i2c/i2c-gate.yaml
> +    unevaluatedProperties: false
> +    description:
> +      The MAX96717 will forward the I2C requests from the
> +      incoming GMSL2 link. Therefore, it supports an i2c-gate
> +      subnode to configure a sensor.
> +
> +required:
> +  - compatible
> +  - reg
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/media/video-interfaces.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        serializer: serializer@40 {
> +            compatible = "maxim,max96717f";
> +            reg = <0x40>;
> +            gpio-controller;
> +            #gpio-cells = <2>;
> +            #clock-cells = <0>;
> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port@0 {
> +                    reg = <0>;
> +                    max96717f_csi_in: endpoint {
> +                        bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
> +                        data-lanes = <1 2 3 4>;
> +                        remote-endpoint = <&sensor_out>;
> +                    };
> +                };
> +
> +                port@1 {
> +                    reg = <1>;
> +                    max96917f_gmsl_out: endpoint {
> +                        remote-endpoint = <&deser_gmsl_in>;
> +                    };
> +                };
> +            };
> +
> +            i2c-gate {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +                sensor@10 {
> +                    compatible = "st,st-vgxy61";
> +                    reg = <0x10>;
> +                    reset-gpios = <&serializer 0 GPIO_ACTIVE_LOW>;
> +                    clocks = <&serializer>;
> +                    VCORE-supply = <&v1v2>;
> +                    VDDIO-supply = <&v1v8>;
> +                    VANA-supply = <&v2v8>;
> +                    port {
> +                        sensor_out: endpoint {
> +                            data-lanes = <1 2 3 4>;
> +                            remote-endpoint = <&max96717f_csi_in>;
> +                        };
> +                    };
> +                };
> +            };
> +        };
> +    };
> +...
Julien Massot April 23, 2024, 1:36 p.m. UTC | #3
Hi Sakari,

Thanks for the review

On 4/12/24 13:10, Sakari Ailus wrote:
> Hi Julien,
> 
> On Mon, Mar 25, 2024 at 02:16:31PM +0100, Julien Massot wrote:
>> Add DT bindings for Maxim MAX96717 GMSL2 Serializer.
>>
>> Signed-off-by: Julien Massot <julien.massot@collabora.com>
>> ---
>> Change since v5:
>>   - Reverse the fallback MAX96717 can fallback to MAX96717F
>>   - Use const instead of enum for MAX96717F compatible
>>   
>> Change since v4:
>>   - Add compatible for MAX96717 and use it as a fallback for MAX96717F
>>   - Remove extra '|' for decriptions
>>   - Reference 'i2c-gate' instead of 'i2c-controller'
>>
>> Change since v3:
>>   - Renamed file to maxim,max96717.yaml dropped the 'f' suffix
>>   - Added lane-polarities and bus type properties to the CSI endpoint
>>
>> Change since v2:
>>   - remove reg description
>>   - add data lanes min/maxItems
>>   - Use generic node name
>> ---
>>   .../bindings/media/i2c/maxim,max96717.yaml    | 164 ++++++++++++++++++
>>   1 file changed, 164 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
>> new file mode 100644
>> index 000000000000..ac8bf11a6fa5
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
>> @@ -0,0 +1,164 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +# Copyright (C) 2024 Collabora Ltd.
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/media/i2c/maxim,max96717.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: MAX96717 CSI-2 to GMSL2 Serializer
>> +
>> +maintainers:
>> +  - Julien Massot <julien.massot@collabora.com>
>> +
>> +description:
>> +  The MAX96717 serializer converts MIPI CSI-2 D-PHY or C-PHY formatted input
>> +  into GMSL2 serial outputs. The device allows the GMSL2 link to
>> +  simultaneously transmit bidirectional control-channel data while forward
>> +  video transmissions are in progress. The MAX96717 can connect to one
>> +  remotely located deserializer using industry-standard coax or STP
>> +  interconnects. The device cans operate in pixel or tunnel mode. In pixel mode
>> +  the MAX96717 can select the MIPI datatype, while the tunnel mode forward all the MIPI
>> +  data received by the serializer.
>> +  The MAX96717 supports Reference Over Reverse (channel),
>> +  to generate a clock output for the sensor from the GMSL reverse channel.
>> +
>> +  The GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the
>> +  forward direction and 187.5Mbps in the reverse direction.
>> +  MAX96717F only supports a fixed rate of 3Gbps in the forward direction.
>> +
>> +properties:
>> +  compatible:
>> +    oneOf:
>> +      - const: maxim,max96717f
>> +      - items:
>> +          - enum:
>> +              - maxim,max96717
>> +          - const: maxim,max96717f
>> +
>> +  '#gpio-cells':
>> +    const: 2
>> +    description:
>> +      First cell is the GPIO pin number, second cell is the flags. The GPIO pin
>> +      number must be in range of [0, 10].
>> +
>> +  gpio-controller: true
>> +
>> +  '#clock-cells':
>> +    const: 0
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  ports:
>> +    $ref: /schemas/graph.yaml#/properties/ports
>> +
>> +    properties:
>> +      port@0:
>> +        $ref: /schemas/graph.yaml#/$defs/port-base
>> +        unevaluatedProperties: false
>> +        description: CSI-2 Input port
>> +
>> +        properties:
>> +          endpoint:
>> +            $ref: /schemas/media/video-interfaces.yaml#
>> +            unevaluatedProperties: false
>> +
>> +            properties:
>> +              data-lanes:
>> +                minItems: 1
>> +                maxItems: 4
>> +
>> +              lane-polarities:
>> +                minItems: 1
>> +                maxItems: 5
>> +
>> +              bus-type:
>> +                enum:
>> +                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
>> +                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
> 
> Now that you have C-PHY here, does the hardware support data line order
> mapping? Just wondering. The bindings can be added without that and support
> added later on---that's what the video-interfaces.yaml is currently
> missing.
> 
> lane-polarities is only valid for D-PHY. What about the data-lanes, the
> maximum is probably different for C-PHY?
My mistake here; MAX96717 doesn't support C-PHY; I think I was confused 
by some of the schemas implying a deserializer with C-PHY support.
I will drop the bus-type property in v7.

Regards,
Sakari Ailus April 23, 2024, 9:43 p.m. UTC | #4
Hi Julien,

On Tue, Apr 23, 2024 at 03:36:39PM +0200, Julien Massot wrote:
> > > +            properties:
> > > +              data-lanes:
> > > +                minItems: 1
> > > +                maxItems: 4
> > > +
> > > +              lane-polarities:
> > > +                minItems: 1
> > > +                maxItems: 5
> > > +
> > > +              bus-type:
> > > +                enum:
> > > +                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
> > > +                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
> > 
> > Now that you have C-PHY here, does the hardware support data line order
> > mapping? Just wondering. The bindings can be added without that and support
> > added later on---that's what the video-interfaces.yaml is currently
> > missing.
> > 
> > lane-polarities is only valid for D-PHY. What about the data-lanes, the
> > maximum is probably different for C-PHY?
> My mistake here; MAX96717 doesn't support C-PHY; I think I was confused by
> some of the schemas implying a deserializer with C-PHY support.
> I will drop the bus-type property in v7.

Ack, thanks!
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
new file mode 100644
index 000000000000..ac8bf11a6fa5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
@@ -0,0 +1,164 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2024 Collabora Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/maxim,max96717.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX96717 CSI-2 to GMSL2 Serializer
+
+maintainers:
+  - Julien Massot <julien.massot@collabora.com>
+
+description:
+  The MAX96717 serializer converts MIPI CSI-2 D-PHY or C-PHY formatted input
+  into GMSL2 serial outputs. The device allows the GMSL2 link to
+  simultaneously transmit bidirectional control-channel data while forward
+  video transmissions are in progress. The MAX96717 can connect to one
+  remotely located deserializer using industry-standard coax or STP
+  interconnects. The device cans operate in pixel or tunnel mode. In pixel mode
+  the MAX96717 can select the MIPI datatype, while the tunnel mode forward all the MIPI
+  data received by the serializer.
+  The MAX96717 supports Reference Over Reverse (channel),
+  to generate a clock output for the sensor from the GMSL reverse channel.
+
+  The GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the
+  forward direction and 187.5Mbps in the reverse direction.
+  MAX96717F only supports a fixed rate of 3Gbps in the forward direction.
+
+properties:
+  compatible:
+    oneOf:
+      - const: maxim,max96717f
+      - items:
+          - enum:
+              - maxim,max96717
+          - const: maxim,max96717f
+
+  '#gpio-cells':
+    const: 2
+    description:
+      First cell is the GPIO pin number, second cell is the flags. The GPIO pin
+      number must be in range of [0, 10].
+
+  gpio-controller: true
+
+  '#clock-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 Input port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              lane-polarities:
+                minItems: 1
+                maxItems: 5
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - data-lanes
+              - bus-type
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        unevaluatedProperties: false
+        description: GMSL Output port
+
+    required:
+      - port@1
+
+  i2c-gate:
+    $ref: /schemas/i2c/i2c-gate.yaml
+    unevaluatedProperties: false
+    description:
+      The MAX96717 will forward the I2C requests from the
+      incoming GMSL2 link. Therefore, it supports an i2c-gate
+      subnode to configure a sensor.
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        serializer: serializer@40 {
+            compatible = "maxim,max96717f";
+            reg = <0x40>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            #clock-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    max96717f_csi_in: endpoint {
+                        bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+                        data-lanes = <1 2 3 4>;
+                        remote-endpoint = <&sensor_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    max96917f_gmsl_out: endpoint {
+                        remote-endpoint = <&deser_gmsl_in>;
+                    };
+                };
+            };
+
+            i2c-gate {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                sensor@10 {
+                    compatible = "st,st-vgxy61";
+                    reg = <0x10>;
+                    reset-gpios = <&serializer 0 GPIO_ACTIVE_LOW>;
+                    clocks = <&serializer>;
+                    VCORE-supply = <&v1v2>;
+                    VDDIO-supply = <&v1v8>;
+                    VANA-supply = <&v2v8>;
+                    port {
+                        sensor_out: endpoint {
+                            data-lanes = <1 2 3 4>;
+                            remote-endpoint = <&max96717f_csi_in>;
+                        };
+                    };
+                };
+            };
+        };
+    };
+...